Biotechnology Progress

Article	Citations
Biosurfactants: Production and application prospects in the food industry	83
Microbial biosurfactants: A broad analysis of properties, applications, biosynthesis, and techno‐economical assessment of rhamnolipid production	46
Straightforward method for calibration of mechanistic cation exchange chromatography models for industrial applications	45
A novel pH‐responsive nanoniosomal emulsion for sustained release of curcumin from a chitosan‐based nanocarrier: Emphasis on the concurrent improvement of loading, sustained release, and ap	39
Model‐based design and control of a small‐scale integrated continuous end‐to‐end mAb platform	38
Optimization of electroporation and other non‐viral gene delivery strategies for T cells	38
Lignin degradation by microorganisms: A review	36
Recent biotechnological tools for diagnosis of corona virus disease: A review	35
Recent advances in domesticating non‐model microorganisms	32
Developments of biobased plasticizers for compostable polymers in the green packaging applications: A review	29
Computational drug repurposing study of the RNA binding domain of SARS‐CoV‐2 nucleocapsid protein with antiviral agents	28
Comparison of mono‐rhamnolipids and di‐rhamnolipids on microbial enhanced oil recovery (MEOR) applications	25
In vitro hepatic steatosis model based on gut–liver‐on‐a‐chip	24
Decoration of electrical conductive polyurethane‐polyaniline/polyvinyl alcohol matrixes with mussel‐inspired polydopamine for bone tissue engineering	24
Synthesis of a novel nanocomposite containing chitosan as a three‐dimensional printed wound dressing technique: Emphasis on gene expression	23
Cell culture process metabolomics together with multivariate data analysis tools opens new routes for bioprocess development and glycosylation prediction	23
Proliferation and differentiation of primary bovine myoblasts using Chlorella vulgaris extract for sustainable production of cultured meat	23
Green and sustainable route for oxidative depolymerization of lignin: New platform for fine chemicals and fuels	22
Economic assessment of continuous processing for manufacturing of biotherapeutics	22
Bioremediation of water contaminated with uranium using Penicillium piscarium	22
Tuning monoclonal antibody galactosylation using Raman spectroscopy‐controlled lactic acid feeding	21
Emulsion‐based encapsulation of pluripotent stem cells in hydrogel microspheres for cardiac differentiation	20
Identification and characterization of a residual host cell protein hexosaminidase B associated with N‐glycan degradation during the stability study of a therapeutic recombinant monoclonal anti	19
Reshaping cell line development and CMC strategy for fast responses to pandemic outbreak	19
Establishment and characterization of an in vitro 3D ovarian cancer model for drug screening assays	19

Lipase activation by molecular bioimprinting: The role of interactions between fatty acids and enzyme active site	18
Process and operations strategies to enable global access to antibody therapies	17
Effectiveness of host cell protein removal using depth filtration with a filter containing diatomaceous earth	17
Biosynthesis of vitamin B12 by Propionibacterium freudenreichii subsp. shermanii ATCC 13673 using liquid acid protein residue of soybean as culture medium	17
Anti‐epithelial cell adhesion molecule RNA aptamer‐conjugated liposomal doxorubicin as an efficient targeted therapy in mice bearing colon carcinoma tumor model	16
Evaluation of exosome loading characteristics in their purification via a glycerol‐assisted hydrophobic interaction chromatography method on a polyester, capillary‐channeled poly	16
Cross‐scale quality assessment of a mechanistic cation exchange chromatography model	16
A novel approach to evaluate ELISA antibody coverage of host cell proteins—combining ELISA‐based immunocapture and mass spectrometry	16
High throughput solubility and redissolution screening for antibody purification via combined PEG and zinc chloride precipitation	16
Immobilization of horseradish peroxidase onto Purolite® A109 and its anthraquinone dye biodegradation and detoxification potential	16
Spectroscopy integration to miniature bioreactors and large scale production bioreactors–Increasing current capabilities and model transfer	15
In silico process characterization for biopharmaceutical development following the quality by design concept	15
Mesenchymal stem cells engineered by modified polyethylenimine polymer for targeted cancer gene therapy, in vitro and in vivo	15
Development of a targeted integration Chinese hamster ovary host directly targeting either one or two vectors simultaneously to a single locus using the Cre/Lox recombinase‐mediated cassette exchange	15
Deep brain stimulation: Challenges at the tissue‐electrode interface and current solutions	15
Using microalgae for remediation of crude petroleum oil–water emulsions	14
The effect of biosynthesized selenium nanoparticles on the expression of CYP51A and HSP90 antifungal resistance genes in Aspergillus fumigatus and Aspergi	14
Exploring the potential of machine learning for more efficient development and production of biopharmaceuticals	14
Introducing a delivery system for melanogenesis inhibition in melanoma B16F10 cells mediated by the conjugation of tyrosine ammonia‐lyase and a TAT‐penetrating peptide	14
Nanoparticles in cancer immunotherapies: An innovative strategy	14
Identification and characterization of a Triton X‐100 replacement for virus inactivation	14
Devices and techniques used to obtain and analyze three‐dimensional cell cultures	14
Characterization of liver zonation‐like transcriptomic patterns in HLCs derived from hiPSCs in a microfluidic biochip environment	13
Designing a new dimerized anti human TNF‐α aptamer with blocking activity	13
Raman‐based dynamic feeding strategies using real‐time glucose concentration monitoring system during adalimumab producing CHO cell cultivation	13
Relationship between HETP measurements and breakthrough curves in short chromatography columns	13
Molecularly imprinted cryogel cartridges for the selective recognition of tyrosine	13
Development of a high cell density transient CHO platform yielding mAb titers greater than 2 g/L in only 7 days	12
Mechanistic model of pH and excipient concentration during ultrafiltration and diafiltration processes of therapeutic antibodies	12
Synthetic biology in biofilms: Tools, challenges, and opportunities	12
Stabilization of immobilized l‐arabinose isomerase for the production of d‐tagatose from d‐galactose	12
Integration of ion exchange resin materials for a downstream‐processing approach of an imine reductase‐catalyzed reaction	11
Adapting virus filtration to enable intensified and continuous monoclonal antibody processing	11
Targeted double domain nanoplex based on galactosylated polyethylenimine enhanced the delivery of IL‐12 plasmid	11
Raman based chemometric model development for glycation and glycosylation real time monitoring in a manufacturing scale CHO cell bioreactor process	11
Immobilized enzymes as potent antibiofilm agent	11
Glycan engineering reveals interrelated effects of terminal galactose and core fucose on antibody‐dependent cell‐mediated cytotoxicity	11
Metabolic engineering of Yarrowia lipolytica for the production of isoprene	11
Ectoine production in bioreactor by Halomonas elongataDSM2581: Using MWCNT and Fe‐nanoparticle	11
Chemistry of lignin and hemicellulose structures interacts with hydrothermal pretreatment severity and affects cellulose conversion	11
Advances in 3D printing of composite scaffolds for the repairment of bone tissue associated defects	11
Hydrolysis of lignocellulose by anaerobic fungi produces free sugars and organic acids for two‐stage fine chemical production with Kluyveromyces marxianus	11
Innovative development of membrane sparger for carbon dioxide supply in microalgae cultures	10
A rapid novel strategy for screening of antibody phage libraries for production, purification, and functional characterization of amber stop codons containing single‐chain antibody fragments	10
Response surface methodology optimization of polyhydroxyalkanoate production by Burkholderia cepacia BPT1213 using waste glycerol from palm oil‐based biodiesel production	10
Immunoliposomes bearing lymphocyte activation gene 3 fusion protein and P5 peptide: A novel vaccine for breast cancer	10
Pumpless, unidirectional microphysiological system for testing metabolism‐dependent chemotherapeutic toxicity	10
Nanoelicitor based enhancement of camptothecin production in fungi isolated from Ophiorrhiza mungos	10
Computational fluid dynamics analysis of mixing and gas–liquid mass transfer in wave bag bioreactor	10
Effect of using a nitrogen atmosphere on enzyme hydrolysis at high corn stover loadings in an agitated reactor	10

Differential responses in EPA and fucoxanthin production by the marine diatom Stauroneis sp. under varying cultivation conditions	10
Ionic liquid‐based in situ product removal design exemplified for an acetone–butanol–ethanol fermentation	10
Model‐based workflow for scale‐up of process strategies developed in miniaturized bioreactor systems	10
Bioconversion of ferulic acid into aroma compounds by newly isolated yeast strains of the Latin American biodiversity	10
Metabolic trends of Chinese hamster ovary cells in biopharmaceutical production under batch and fed‐batch conditions	10
Effects of variable domain orientation on anti‐HER2 single‐chain variable fragment antibody expressed in the Escherichia coli cytoplasm	9
Yeast cells for encapsulation of bioactive compounds in food products: A review	9
Induced pluripotent stem cells can utilize lactate as a metabolic substrate to support proliferation	9
Hypoxia preconditioned mesenchymal stem cell‐derived exosomes induce ex vivo expansion of umbilical cord blood hematopoietic stem cells CD133+ by stimulation of Notch signaling pathway	9
Rapid intensification of an established CHO cell fed‐batch process	9
Reduction of medium consumption in perfusion mammalian cell cultures using a perfusion rate equivalent concentrated nutrient feed	9
Metabolic profiling of Chinese hamster ovary cell cultures at different working volumes and agitation speeds using spin tube reactors	9
CRISPR‐Cas9 mediated engineering of Bacillus licheniformis for industrial production of (2R,3S)‐butanediol	9
Development of a scale‐up strategy for Chinese hamster ovary cell culture processes using the kLa ratio as a direct indicator of gas stripping conditions	9
Extraction of recombinant periplasmic proteins under industrially relevant process conditions: Selectivity and yield strongly depend on protein titer and methodology	9
Enhanced filtration performance usingfeed‐and‐bleedconfiguration for purification of antibody precipitates	8
The function of chitosan/agarose biopolymer on Fe2O3 nanoparticles and evaluation of their effects on MCF‐7 breast cancer cell line and expression of B	8
Development of a miniature bioreactor model to study the impact of pH and DOT fluctuations on CHO cell culture performance as a tool to understanding heterogeneity eff	8
Characterization of Chinese hamster ovary cell culture feed media precipitate	8
X‐ray sterilization of biopharmaceutical manufacturing equipment—Extractables profile of a film material and copolyester Tritan™ compared to gamma irradiation	8
CHOK1SV GS‐KO SSIexpression system: A combination of theFer1L4locus and glutamine synthetase selection	8
Biophysical analysis of SARS‐CoV‐2 transmission and theranostic development via N protein computational characterization	8
Rheology of enzyme liquefied corn stover slurries: The effect of solids concentration on yielding and flow behavior	8
Protection of human induced pluripotent stem cells against shear stress in suspension culture by Bingham plastic fluid	8
PVA based nanofiber containing cellulose modified with graphitic carbon nitride/nettles/trachyspermum accelerates wound healing	8
A rational approach to improving titer in Escherichia coli‐based cell‐free protein synthesis reactions	8
Optimization of β‐mannanase production by Bacillus subtilis US191 using economical agricultural substrates	8
Development of virus‐like particles‐based vaccines against coronaviruses	8
Elemental metal variance in cell culture raw materials for process risk profiling	8
Continuous CTC separation through a DEP‐based contraction–expansion inertial microfluidic channel	8
A mechanistic model to account for the Donnan and volume exclusion effects in ultrafiltration/diafiltration process of protein formulations	7
Larvicidal potential of cell wall degrading enzymes from Trichoderma asperellum against Aedes aegypti (Diptera: Culicidae)	7
Wound dressing based on PVA nanofiber containing silk fibroin modified with GO/ZnO nanoparticles for superficial wound healing: In vitro and in vivo evaluations	7
The pandemic and resilience for the future: AccBio 2021	7
Microfluidic chip‐based single‐cell cloning to accelerate biologic production timelines	7
Single‐cell oil production by Mortierella isabellinaDSM 1414 using different sugars as carbon source	7
High throughput screening setup of a scale‐down device for membrane chromatography‐aggregate removal of monoclonal antibodies	7
A class of low‐cost alternatives to kifunensine for increasing high mannose N‐linked glycosylation for monoclonal antibody production in Chinese hamster ovary cells	7
Smart process development: Application of machine‐learning and integrated process modeling for inclusion body purification processes	7
Aptamer‐functionalized quantum dots as theranostic nanotools against cancer and bacterial infections: A comprehensive overview of recent trends	7
α‐Acetolactate decarboxylase immobilized in chitosan: A highly stable biocatalyst to prevent off‐flavor in beer	7
Pretreatments for enhancing clarification efficiency of depth filtration during production of monoclonal antibody therapeutics	7
Applications of flow cytometry sorting in the pharmaceutical industry: A review	7
Prebiotic peptides, their formation, fermentation in the gut, and health implications	7
High‐throughput and automation advances for accelerating single‐cell cloning, monoclonality and early phase clone screening steps in mammalian cell line development for biologics production	7
Role of membrane structure on the filtrate flux during monoclonal antibody filtration through virus retentive membranes	6
Analysis of fouling and breakthrough of process related impurities during depth filtration using confocal microscopy	6
Investigating the role of mechanics in lignocellulosic biomass degradation during hydrolysis: Part II	6
Effects of different graphene‐based nanomaterials as elicitors on growth and ganoderic acid production by Ganoderma lucidum	6
Molecularly imprinted spongy columns for Angiotensin(II) recognition from human serum	6
Comprehensive studies on building a scalable downstream process for mRNAs to enable mRNA therapeutics	6
Semicontinuous system for the production of recombinant mCherry protein in Chlamydomonas reinhardtii	6
Evaluation of quenching methods for metabolite recovery in photoautotrophic Synechococcus sp. PCC 7002	6
Bombyx mori kynurenine 3‐monooxygenase gene editing and insect molecular breeding using the clustered regularly interspaced short palindromic repeat/CRISPR associated protein 9 syste	6
Tangential flow filtration of haptoglobin	6
High‐capacity multimodal anion‐exchange membranes for polishing of therapeutic proteins	6
Improvement of the efficiency and quality in developing a new CHO host cell line	6
Biocathode design with highly‐oriented immobilization of multi‐copper oxidase from Pyrobaculum aerophilum onto a single‐walled carbon nanotube surface via a carbon nanotube‐binding peptide	6
Chromatographic capture of cells to achieve single stage clarification in recombinant protein purification	6
Optimization and feedback control system of dilution rate for 1,3‐propanediol in two‐stage fermentation: A theoretical study	6
Transferability of miRNA‐technology to bioprocessing: Influence of cultivation mode and media	6
Safety risk management for low molecular weight process‐related impurities in monoclonal antibody therapeutics: Categorization, risk assessment, testing strategy, and process development with leveragi	6
Production of biodiesel by Burkholderia cepacia lipase as a function of process parameters	6
Effect of nitrate feeding strategies on lipid and biomass productivities in fed‐batch cultures of Nannochloropsis gaditana	6
The effect of amino acid supplementation in an industrial Chinese Hamster Ovary process	6
Purification of animal immunoglobulin G (IgG) using peptoid affinity ligands	6
Accelerated CMC workflows to enable speed to clinic in the COVID‐19 era: A multi‐company view from the biopharmaceutical industry	6
Biophysical properties of tense quaternary state polymerized human hemoglobins bracketed between 500 kDa and 0.2 μm in size	6
Self‐assembling protein nanocages for modular enzyme assembly by orthogonal bioconjugation	6
Bax and Bak knockout apoptosis‐resistant Chinese hamster ovary cell lines significantly improve culture viability and titer in intensified fed‐batch culture process	6
An antiphage Escherichia coli mutant for higher production of L‐threonine obtained by atmospheric and room temperature plasma mutagenesis	6
Evaluation of the efficiency of modified PAMAM dendrimer with low molecular weight protamine peptide to deliver IL ‐12 plasmid int	5
Hydrofoam and oxygen headspace bioreactors improve cell‐free therapeutic protein production yields through enhanced oxygen transport	5
Optimization of the nutritional environment for differentiation of human‐induced pluripotent stem cells using design of experiments—A proof of concept	5
Determination of protein concentration in downstream biomanufacturing processes by in‐line index of refraction	5
Development of targeted gene delivery system based on liposome and PAMAM dendrimer functionalized with hyaluronic acid and TAT peptide: In vitro and in vivo studies	5
Sensitivity of a PER.C6® cell line to bis(2,4‐di‐tert‐butylphenyl)phosphate and evaluation of a new, biocompatible single‐use film	5
Evaluation of lentiviral vector stability and development of ion exchange purification processes	5
Promising insights into the kosmotropic effect of magnetic nanoparticles on proteins: The pivotal role of protein corona formation	5
Determination of mold contamination using ergosterol imprinted particles	5

Effect of iron addition on mAb productivity and oxidative stress in Chinese hamster ovary culture	5
Quantification of glycated IgG in CHO supernatants: A practical approach	5
Structure and binding ability of self‐assembled α‐lactalbumin protein nanotubular gels	5
Impact of different trace elements on metabolic routes during heterotrophic growth of C. ljungdahlii investigated through online measurement of the carbon dioxide transfer rate	5
Newly synthesized peptide, Ara‐27, exhibits significant improvement in cell‐penetrating ability compared to conventional peptides	5
Prefiltration enhances performance of sterile filtration for glycoconjugate vaccines	4
Polyunsaturated fatty acids production by solid‐state fermentation on polyurethane foam by Mortierella alpina	4
Preparation and characterization of poly (lactic‐co‐glycolic acid) nanofibers containing simvastatin coated with hyaluronic acid for using in periodontal tissue engineering	4
Control of leached beta‐glucan levels from depth filters by an improved depth filtration flush strategy	4
Analytical characterization of host‐cell‐protein‐rich aggregates in monoclonal antibody solutions	4
Impact of stress‐response related transcription factor overexpression on lignocellulosic inhibitor tolerance of Saccharomyces cerevisiae environmental isolates	4
Modulation of high mannose levels in N‐linked glycosylation through cell culture process conditions to increase antibody‐dependent cell‐mediated cytotoxicity activity for an antibody biosimilar	4
A quantitative model for metabolic intervention using gut microbes	4
Genetic rearrangement during site specific integration event facilitates cell line development of a bispecific molecule	4
Scale‐up issues during sterile filtration of glycoconjugate vaccines	4
Biosynthesis of 1,3‐propanodiol and 2,3‐butanodiol from residual glycerol in continuous cell‐immobilized Klebsiella pneumoniae bioreactors	4
Mechanistic insights into viral clearance during the chromatography steps in antibody processes by using virus surrogates	4
Preventing pyruvate kinase muscle expression in Chinese hamster ovary cells curbs lactogenic behavior by altering glycolysis, gating pyruvate generation, and increasing pyruvate flux into t	4
Highly sensitive HPLC analysis and biophysical characterization of N‐glycans of IgG‐Fc domain in comparison between CHO and 293 cells using FcγRIIIa ligand	4
Probing morphological, genetic and metabolomic changes of in vitro embryo development in a microfluidic device	4
Transfer of continuous manufacturing process principles for mAb production in a GMP environment: A step in the transition from batch to continuous	4
Process analytics 4.0: A paradigm shift in rapid analytics for biologics development	4
Impact of X‐ray irradiation as an equivalent alternative to gamma for sterilization of single‐use bioprocessing polymers	4
Exometabolome profiling reveals activation of the carnitine buffering pathway in fed‐batch cultures ofCHOcells co‐fed with glucose and lactic acid	4
Modeling flux in tangential flow filtration using a reverse asymmetric membrane for Chinese hamster ovary cell clarification	4
Traces matter: Targeted optimization of monoclonal antibody N‐glycosylation based on/by implementing automated high‐throughput trace element screening	4
Impact of iron raw materials and their impurities onCHOmetabolism and recombinant protein product quality	4
Microbioreactor (micro‐Matrix) potential in aerobic and anaerobic conditions with different industrially relevant microbial strains	4
Dentin regeneration based on tooth tissue engineering: A review	4
Selective binding of Ni2+ and Cu2+ metal ions with naphthazarin esters isolated from Arnebia euchroma	4
Identification of compendial nonionic detergents for the replacement of Triton X‐100 in bioprocessing	4
New technical concept for alternating tangential flow filtration in biotechnological cell separation processes	4
Examining organic acid production potential and growth‐coupled strategies in Issatchenkia orientalis using constraint‐based modeling	3
Modeling tangential flow filtration using reverse asymmetric membranes for bioreactor harvesting	3
Application of a fluorescent dye‐based microfluidic sensor for real‐time detection of mAb aggregates	3
Purification of Pseudomonas sp. proteases through aqueous biphasic systems as an alternative source to obtain bioactive protein hydrolysates	3
Immobilization of urease enzyme on chitosan/polyvinyl alcohol electrospun nanofibers	3
A novel NCI‐H69V small cell lung cancer functional mini‐tumor model for future treatment screening applications	3
Efficient enzymatic synthesis of L‐ascorbyl palmitate using Candida antarctica lipase B‐embedded metal‐organic framework	3
Application of machine learning methods to pathogen safety evaluation in biological manufacturing processes	3
Generation of FX−/− and Gmds−/−CHOZN host cell lines for the production of afucosylated therapeutic antibodies	3
Removal of chromatin by salt‐tolerant endonucleases for production of recombinant measles virus	3
Toward optimal clearance: A universal affinity‐based mass spectrometry approach for comprehensive ELISA reagent coverage evaluation and HCP hitchhiker analysis	3
Bio‐based composite granules with simultaneous biocontrol and phosphorus fertilization roles: Outcomes from a lab‐scale in vitro assessment	3
Application of Ambr15 system for simulation of entire SARS‐CoV‐2 vaccine production process involving macrocarriers	3
Effect of particle size distribution on filtration performance of cell culture medium	3
Interaction of leachable model compounds and their impact on Chinese hamster ovary cell cultivation	3
A ribonucleoprotein‐based decaplex CRISPR/Cas9 knockout strategy for CHO host engineering	3
Optimization of an artificial neural network topology using response surface methodology for microbial fuel cell power prediction	3
An innovative strategy to recycle permeate in biologics continuous manufacturing process to improve material efficiency and sustainability	3
A new strategy for the decellularization of whole organs by hydrostatic pressure	3
Assessment of shock pretreatment and alkali pretreatment on corn stover using enzymatic hydrolysis	3
Transcriptomic features reveal molecular signatures associated with recombinant adeno‐associated virus production in HEK293 cells	3
The effect of magnetized water on the oxidation reaction of phenol derivatives and aromatic amines by horseradish peroxidase enzyme	3
A Novel Polyculture Growth Model of Native Microalgal Communities to Estimate Biomass Productivity for Biofuel Production	3
Purification of rabies virus glycoprotein produced in Drosophila melanogaster S2 cells: An efficient immunoaffinity method	3
Optimized prodigiosin production with Pseudomonas putida KT2440 using parallelized noninvasive online monitoring	3
Transfection of glycoprotein encoding mRNA for swift evaluation of N‐glycan engineering strategies	3
Transgenic plants expressing a Clostridium difficile spore antigen as an approach to develop low‐cost oral vaccines	3
Identification and classification of host cell proteins during biopharmaceutical process development	3
Efficient production of an ezetimibe intermediate using carbonyl reductase coupled with glucose dehydrogenase	3
A functional long‐term 2D serum‐free human hepatic in vitro system for drug evaluation	3
Modulation of transmembrane pressure in manufacturing scale tangential flow filtration N‐1 perfusion seed culture	3
Establishment and characterization of lung co‐culture spheroids for paclitaxel loaded Eudragit® RL 100 nanoparticle evaluation	2
Real‐time online monitoring of insect cell proliferation and baculovirus infection using digital differential holographic microscopy and machine learning	2
A suitable and effective stepwise oxidative refolding procedure for highly‐cationic tetrameric avidin in nucleic acid free conditions	2
Effect of filtrate flux and process disruptions on virus retention by a relatively homogeneous virus removal membrane	2
Development of chondrocyte‐laden alginate hydrogels with modulated microstructure and properties for cartilage regeneration	2
Protein adsorption on core‐shell resins for flow‐through purifications: Effect of protein molecular size, shape, and salt concentration	2
Correlation of microbial community structure and volatile flavor compounds during corn yellow wine fermentation	2
Sources and methods of manufacturing xanthan by fermentation of various carbon sources	2
Preparation of regenerable magnetic nanoparticles for cellulase immobilization: Improvement of enzymatic activity and stability	2
Recent advances of dendrimer in targeted delivery of drugs and genes to stem cells as cellular vehicles	2
Online measurement of the viscosity in shake flasks enables monitoring of γ‐PGA production in depolymerase knockout mutants of Bacillus subtilis with the phosphate‐starvation inducib	2
Optimization and characterization of rhamnolipid production by Pseudomonas aeruginosa NY3 using waste frying oil as	2
Acetate accumulation and regulation by process parameters control in Chinese hamster ovary cell culture	2
Design and optimization of membrane chromatography for monoclonal antibody charge variant separation	2
Modulation of nutrient precursors for controlling metabolic inhibitors by genome‐scale flux balance analysis	2
Analytical characterization of broadly neutralizing antibody CAP256LS heavy chain clipping during manufacturing development	2
Integrated evaluation the antioxidant activity of epicatechin from cell dynamics	2
Advances in polymer‐based cell encapsulation and its applications in tissue repair	2
Understanding the effect of temperature downshift onCHOcell growth, antibody titer and product quality by intracellular metabolite profiling and in vivo monitoring of redox state	2
Consolidated plasmid Design for Stabilized Heterologous Production of the complex natural product Siderophore Yersiniabactin	2
Valorizing prickly pear cladodes via methane‐arrested anaerobic digestion for carboxylic acid production	2
Optimization of carotenoid production by Umbelopsis ramanniana	2
Characterization of soy protein hydrolysates and influence of its iron content on monoclonal antibody production by a murine hybridoma cell line	2
Simultaneous and rapid quantification of microalga biomolecule content using electrochemical impedance spectroscopy	2
Preparation, statistical optimization and characterization of poly(3‐hydroxybutyrate) fermented by Cupriavidus necator utilizing various hydrolysates of alligator weed (Alter	2
Copper impurity of iron raw material contributes to improved cell culture performance	2
A novel modified culture medium for enhancing redifferentiation of chondrocytes for cartilage tissue engineering applications	2
Use of scanning electron microscopy and energy dispersive X‐ray spectroscopy to identify key fouling species during alternating tangential filtration	2
Evaluating multiproduct chromatography Protein A resin reuse for monoclonal antibodies in biopharmaceutical manufacturing	2
Effect of shaking speed on immobilization of cephalosporin C acylase: Correlation between protein distribution and properties of the immobilized enzymes	2
Evaluation of single‐use tangential flow filtration technology for purification of activated polysaccharides used in conjugate vaccine manufacturing	2
Purification of Cas9—RNA complexes by ultrafiltration	2