Materials Today Advances

Article	Citations
0.16BaFeO3-0.84MgFe2O4 hexa-spinel composited ferrites with enhanced magneto-dielectric properties for miniaturized high-frequency antennas	220
Editorial Board	135
Ultra-long cycle H-doped VO2(B) cathode for high capacity aqueous Zn-ion battery	105
Enhanced electromechanical properties in SWCNT/GO-based flexible composites with preliminary healing capability for human motion detection	99
Corrigendum to “Epidermal growth factor receptors siRNA-conjugated collagen modified gold nanoparticles for targeted imaging and therapy of lung cancer” [Mater. Today Adv. 12 (2021), 100191]	94
All-in-one inorganic nanoagents for near-infrared-II photothermal-based cancer theranostics	87
Pyromellitic diimides and naphthalene diimides: From versatile supramolecular building blocks to advanced materials	77
EGFR-antagonistic affibody-functionalized Pt-based nanozyme for enhanced tumor radiotherapy	74
Ultra-low-energy catalytic degradation of ozone by off-stoichiometric delafossite Cu–Cr–O for highly selective low-temperature solid-state O3 sensors	66
Laser-enabled localized synthesis of Mo1-xWxS2 alloys with tunable composition	63
Mapping the transient phase diagram of titanium suboxide (TiOx) thin films	51
Li1·5Al0·3Si0·2Ti1·7P2·8O12 inorganic solid electrolyte for high-performance all-solid-state Li-ion batteries	47
Research on the construction of portable electrochemical sensors for environmental compounds quality monitoring	45
On the generality of a preferred orientation at interfaces of crystals	43
Surface passivation of perovskite with organic hole transport materials for highly efficient and stable perovskite solar cells	42
Phase formations and microstructures of Ti20Zr15Hf15Ni35Cu15 high-entropy shape memory alloy under different aging conditions	41
Enabling high-fidelity personalised pharmaceutical tablets through multimaterial inkjet 3D printing with a water-soluble excipient	40
Bioactive manganese-decorated titanium implants for osteoporotic bone regeneration	40
Enhanced dielectric loss in N-doped three-dimensional porous carbon for microwave absorption	40
Light emission, structure-phase evolution, and photocatalytic behavior in full-series multilayered GaTe1−xSx (0 ≤ x ≤ 1) with direct-transition edge	39
A decade's worth of impact: Dox loaded liposomes in anticancer activity	38
Progress and opportunities in additive manufacturing of electrically conductive polymer composites	36
Enhanced microstructure, mechanical properties, and thermal stability of powder metallurgy Al-Ni-Cu-Fe alloy through thermomechanical processing and recrystallization	35
Nanomaterials and nanotechnology for biomedical soft robots	33
Zinc sulfide-based hybrid exosome-coated nanoplatform for targeted treatment of glioblastoma in an orthotopic mouse glioblastoma model	32

High-entropy alloys as magnetic shielding materials in low-frequency wireless power transmission	32
Therapeutic effect of multifunctional celastrol nanoparticles with mitochondrial alkaline drug release in breast cancer	32
Injectable host-guest gel nanovaccine for cancer immunotherapy against melanoma	31
High-throughput design of three-dimensional carbon allotropes with Pmna space group	30
Remarkable conductivity enhancement in P-doped polythiophenes via rational engineering of polymer-dopant interactions	30
Humidity sensitive memristor based on Ni–Al layered double hydroxides	29
Formation of martensitic microstructure in epitaxial Ni-Mn-Ga films after fast cooling	29
Tunable structural transmissive color in fano-resonant optical coatings employing phase-change materials	29
Crystal growth characterization of WSe2 thin film using machine learning	28
Nonvolatile memory characteristics associated with oxygen ion exchange in thin-film transistors with indium-zinc oxide channel and HfO2-x gate oxide	28
Exploration of p-type conductivity in β-Ga2O3 through Se-Mg hyper co-doped: An ion implantation approach	28
Controlling the asymmetry of densified and porous hybrid coatings based on vapor sublimation and deposition	28
Editorial Board	27
Enhanced thermoelectric performance in the zintl antimonides (Ca,RE)9Cd4Sb9 (RE = rare-earth metal). Synergy between increased structural complexity and drive towards optimized chemical bonding	27
Novel lactoferrin-functionalized manganese-doped silica hollow mesoporous nanoparticles loaded with resveratrol for the treatment of ischemic stroke	26
Segregation-guided alloy design via tailored solidification behavior	26
Control of the coffee ring effect during R2R gravure printing for minimizing threshold voltage variation in printed carbon nanotube-based thin film transistors	26
Nanostructured proton-exchange membranes from self-cross-linking perfluoroalkyl-free block-co-polymers	25
On the orientation and temperature dependence of the superelasticity and elastocaloric effect of Cu-Al-Mn-(Ni, Mo, Cr) shape memory alloys	25
Strategies for robust electrocatalytic activity of 2D materials: ORR, OER, HER, and CO2RR	25
Microstructure, mechanical and corrosion properties of FeCrNiCoMnSi0.1 high-entropy alloy coating via TIG arc melting technology and high-frequency ultrasonic impact with welding	25
Advancing cancer immunotherapy through emerging intratumoral delivery and biomedical imaging technologies	24
Nano-engineered biomaterials: Safety matters and toxicity evaluation	24
Hybrid membrane-camouflaged hollow prussian blue nanoparticles for shikonin loading and combined chemo/photothermal therapy of metastatic TNBC	24
Hybrid materials with continuous mechanical property gradients that can be 3D printed	24
Evolution of hierarchical microstructures in Cu–Fe immiscible alloy driven by liquid-state mixing	23
3D printing thermoplastic vulcanizates: Current limitations, innovative solutions, and emerging applications	23
Additive manufacturing of biomimetic lightweight silicon oxycarbide ceramics with high mechanical strength and low thermal conductivity	22
Micro/nanomotors in regenerative medicine	22
Smart core-sheath fibers for advanced textiles: Material integration, manufacturing strategies, and applications	22
Revolutionizing 3D electronics: Single-step femtosecond laser fabrication of conductive embedded structures and circuitry	22
Advancing preclinical drug evaluation: Assessing drug-loaded metal-organic frameworks in droplet-based microfluidics for prostate cancer treatment	22
Early stages of liquid-metal embrittlement in an advanced high-strength steel	21
Biomimetic composite meta-stabilisers with programmable multi-directional quasi-zero stiffness and vibration isolation	21
ZIF-8 as a protein delivery system enhances the application of dental pulp stem cell lysate in anti-photoaging therapy	21
YInMn blue - 200 Years in the making: New intense inorganic pigments based on chromophores in trigonal bipyramidal coordination	21
Simultaneous encapsulation and structural behavior of high-utility CsPbX3 quantum dots in 3D dendritic mesoporous silica nanospheres	20
Reduction of interface defects in gate-recessed GaN HEMTs by neutral beam etching	20
Programmed release of hydrogel microspheres via regulating the immune microenvironment to promotes bone repair	20
Alternating Cu segregation and its stabilization mechanism for coherent η'	20
Breaking new ground in mica exfoliation: Harnessing biaxial straining principles through H2 and N2 intercalation for enhanced layer separation	20
Interfacing two-dimensional and magnetic topological insulators: Bi bilayer on MnBi	20
Synthesis and characterisation of photocurable poly(glycerol sebacate)-co-poly(ethylene glycol) methacrylates	19
Plasma-synthesized NiFe-layered double hydroxides/amorphous MoWSx featuring synergistic effect of hydrogen spillover and vacancy engineering for highly efficient high-current-density overall water spl	18
Electrochemical characterization of halide perovskites: Stability & doping	18
Unraveling the role of relaxation and rejuvenation on the structure and deformation behavior of the Zr-based bulk metallic glass Vit105	18
Weak Li-O bonds and small grains enable fast ion diffusion and electron transport for LiFePO4 cathode	18
Advanced materials for precise detection and antibiotic-free inhibition of bacteria	18
A battery-supercapacitor hybrid energy storage device that directly uses seawater or saltwater lake water	17
Role of stacking faults and hydroxyl groups on the lithium adsorption/desorption properties of layered H2TiO3	17

Nanostructured gelatin-gellan inks double reinforced with cellulose nanofibrils and graphene derivatives for 3D printing in bone regeneration applications	17
Wet-spinning of reduced graphene oxide composite fiber by mechanical synergistic effect with graphene scrolling method	17
Microspheres in bone regeneration: Fabrication, properties and applications	17
Solving the puzzle of hierarchical martensitic microstructures in NiTi by (111)-oriented epitaxial films	16
Irreversible pressure effect on phase transitions and bandgap narrowing of layered MoO3	16
Cubic upconversion nanoparticles used as the theranostic system for the treatment and diagnosis of angiogenesis-related diseases	16
Novel deep learning approach for practical applications of indentation	16
Dual-responsive metal organic framework for electrically-enhanced cascade catalytic tumor therapy	16
Advances in components engineering in vapor deposited perovskite thin film for photovoltaic application	15
Insights into the design of oxidation-resistant Mg alloy by alloying with rare-earth elements	15
An injectable miR181a-IFI6 nanoparticles promote high-quality healing of radiation-induced skin injury	15
Potentialities of nanomaterials for the management and treatment of metabolic syndrome: A new insight	15
Green growth of mixed valence manganese oxides on quasi-freestanding bilayer epitaxial graphene-silicon carbide substrates	15
Innovative nanotechnology tools for the functional control and tracking of human stem cells	15
Engineered metal and their complexes for nanomedicine-elicited cancer immunotherapy	15
A novel near-infrared trifluoromethyl heptamethine cyanine dye with mitochondria-targeting for integration of collaborative treatment of photothermal and sonodynamic therapy	14
Nano- and Micro-Engineered Biomaterials: Trigger, Therapy and Toxicity Evaluations	14
From benchtop to bedside: Precision-engineered bioactive glass-based implants revolutionizing bone defect reconstruction	14
Corrigendum to <Hydrogel microneedle patch for treatment of liver fibrosis> [Mater. Today Adv. 20, December 2023]	14
Corrigendum to “Engineered metal and their complexes for nanomedicine-elicited cancer immunotherapy” [Mater. Today Adv., Engineered metal and their complexes for nanomedicine-elicited cancer immunothe	14
Acoustic tweezer-driven assembly and anti-cancer property of microporous magnesium gallate	14
3D-printed scaffold with halloysite nanotubes laden as a sequential drug delivery system regulates vascularized bone tissue healing	14
MXenes: The two-dimensional influencers	14
Creation of novel composite: Flexible magnetic and conductive muscovite	14
Comprehensive study on phase stability of lead-free Sn-based perovskite FAxMA1-xSnI3	14
The exploration of upconversion luminescence nanoprobes for tobramycin detection based on Förster resonance energy transfer	14
In situ alloying Ti–Ag antibacterial biomaterials via laser powder bed fusion: Microstructure, mechanical properties and bioperformance	13
Carboxymethyl chitosan hydrogel synergistically regulates neural stem cells with ultrasound for the treatment of traumatic brain injury	13
Predicting mechanical properties of newly generated two-dimensional materials with minimum uncertainty	13
Functionalization of chitosan with a polycarboxylic macrocycle yields injectable hydrogel with pH and salts responsiveness	13
Targeting ROS-sensitive TRP ion channels for relieving oxidative stress-related diseases based on nanomaterials	13
SARS-CoV-2 in wastewater: From detection to evaluation	12
Aspirin curcumin ester loaded biomimetic nanodrug improves cognitive deficits in a mouse model of Alzheimer's disease by regulating M1/M2 microglial polarization	12
Microwave-assisted synthesis of polyfluorenes and their modification to ionomers for proton exchange membranes	12
Solving the problem of solidification cracking during additive manufacturing of CrMnFeCoNi high-entropy alloys through addition of Cr3C2 particles to enhance microstructure and properties	12
Dual gradients of bioactive components on electrospun fibers for cell migration and controlled stem cell differentiation	12
Design, synthesis, and progress of covalent organic frameworks (COFs)-based electrocatalysts for valorisation of biomass-derived platform chemicals	12
Ti30Zr10Hf10Ni35Cu15 high-entropy shape memory alloy with tunable transformation temperature and elastocaloric performance by heat treatment	12
Nanomaterials and nanomedicine	12
Innovative nano-electrode chip for electroporation in yeast	12
A new class of porous silicon electrochemical transducers built from pyrolyzed polyfurfuryl alcohol	11
In situ TEM investigation of nickel catalytic graphitization	11
Camouflaged Pdots leverage homologous targeting for NIR-II guided cancer theranostics	11
Giant piezoelectric response in Ho-doped PbMg1/3Nb2/3TiO3 relaxor ferroelectric single crystals via in-situ neutron scattering	11
Near-infrared-triggered in situ gelation of indocyanine green-upconversion nanocomposite hydrogel for combating refractory keratitis via synergistic antimicrobial therapy and corneal repair	11
Quaternized chitosan nanoparticles encapsulating EGCG-Zn complex: A novel approach to accelerate diabetic wound healing in mice	11
Natural plant compounds in synthesis and luminescence modulation of metal nanoclusters: Toward sustainable nanoprobes for sensing and bioimaging	11
Enhanced oxygen evolution reaction and durability of carbon dot-anchored nickel-iron oxyhydroxide electrodes for alkaline water electrolysis at high current densities	11
Oxygen plasma-defect engineered WS2 nanosheets for combination therapy: Folate-targeted, photothermal, and electroporation-enhanced chemotherapy	11
Innovative process to obtain thin films and micro-nanostructured ZrN films from a photo-structurable ZrO2 sol-gel using rapid thermal nitridation	11
Dynamic mechanical performance of FeNiCoAl-based high-entropy alloy: Enhancement via microbands and martensitic transformation	11
Controlled photodegradable hydrogels with photolithographic microstructure arrays as 3D scaffolds for cell culture	11
Microstructural characterization through grain orientation mapping with Laue three-dimensional neutron diffraction tomography	10
3D printed electro-responsive system with programmable drug release	10
Oxidation-driven structural, chemical and electrical transformation in ZrSe2	10
(Hf)PCN-224(Co) as an efficient ppm-level sensor for toxic SO2	10
Achieving wideband electromagnetic wave absorbing performance for PMMA-based composites foam by designing the alternating directional (AD) microporous structure	10
Formation mechanism of micro/nanoscale structures on picosecond laser pulse processed copper	10
Processing and properties of binder-modified large-scale YBCO magnetic shields for ultra-low magnetic field environments	10
Crystallization of Fe74Mo4P10C7.5B2.5Si2 metallic glass: Insights from in-situ synchrotron diffraction and Flash DSC	10
Enhanced mobility and bias stability of SnO2 thin-film transistors enabled by Ga2O3 passivation-induced two-dimensional electron gas	10
Structural, optical and electrical properties in multilayer SnS2(1-x)Se2(x) compounds for energy, thermoelectric and photocatalytic application	9
Surmounting the thermal processing limits: Patterning TiZrCuPdSn bulk metallic glass even with nanocrystallization	9
A rational strategy for directly synthesizing strongly yellow solid-state fluorescent-emitting carbon nanodots composite microparticles by structure regulation	9
Nanocrystal-loaded dissolving microneedles: A novel transdermal strategy for long-acting tizanidine administration	9
Enhanced visible light-driven hydrogen evolution in non-precious metal Ni2P/CdIn2S4 S-type heterojunction via rapid interfacial charge transfer	9
Making parts on Mars: Laser processing of iron contaminated by regolith simulant	9
Concentration-regulated multi-color fluorescent carbon dots for the detection of rifampicin, morin and Al3+	9
Resolving protein-mineral interfacial interactions during in vitro mineralization by atom probe tomography	9
Alkaline-responsive polydiacetylene-peptide hydrogel for pH-sensing and on-demand antimicrobial release	9
Biomimetic PLGA-based nanocomplexes for improved tumor penetration to enhance chemo-photodynamic therapy against metastasis of TNBC	9
Recent advances in metallodrug: Coordination-induced synergy between clinically approved drugs and metal ions	9
Celastrol-based nanoporous membranes prevent subconjunctival fibrosis by activating autophagy	9
Dual functionality for hydrogen production and antibacterial activity in Zn-deficient Cu0.1Zn0.9O photocatalyst loaded with Ag nanoparticles of various sizes	9
Copper–zinc oxide heterostructure photocathodes for hydrogen and methanol production	9
3D printed MXene architectures for a plethora of smart applications	9
Achieving the ultra-broadband near-infrared La3SnGa5O14:Cr3+ phosphor via multiple lattice sites occupation for biological nondestructive detection and night-vision technology	8
Extension of scoring-assisted generative exploration for ionic liquids (SAGE-IL) and its application to ionic liquid design for CO2 capture	8
Hydroxyapatite nanoparticles in situ grown on carbon nanotube as a reinforcement for poly (ε-caprolactone) bone scaffold	8
99mTc-labeled keratin gold-nanoparticles in a nephron-like microfluidic chip for photo-thermal therapy applications	8

Deformation mechanisms of a novel multiphase Zr–30Ti–7Nb–4Sn alloy consisting of β, α′ and α″ phases	8
Balancing the toxicity, photothermal effect, and promotion of osteogenesis: Photothermal scaffolds for malignant bone tumor therapy	8
Predictive control of pore architecture in ice-templated scaffolds via heat flux density modulation	8
Multistructured hydrogel promotes nerve regeneration	8
The Role of NMR in Metal Organic Frameworks: Deep Insights into Dynamics, Structure and Mapping of Functional Groups	8
A general and facile approach to flower-like ZnO fabrication	8
3D-printed Gd3NbO7:Yb3+, Tm3+ remote temperature sensor with high sensitivity for industrial and biological applications	8
Advances of metal organic frameworks in analytical applications	8
Fabrication of active targeting lipid nanoparticles: Challenges and perspectives	8
Synaptic devices for simulating brain processes in visual-information perception to persisting memory through attention mechanisms	8
In situ grown bacterial cellulose-based integrated biphasic biomimetic scaffold for synchronous repair of critical-sized osteochondral defects	7
Dielectric interface engineering using aminosilane coupling agent for enhancement of negative differential resistance phenomenon	7
Anatomy of high-uniform unidirectional volatile switching behavior in SiO2/TiO2-based selection device	7
Nanoscale advanced carbons as an anode for lithium-ion battery	7
P-type conductive Ga2O3 epilayers grown on sapphire substrate by phosphorus-ion implantation technology	7
Electric current-induced directional slip of dislocation and grain boundary ordering	7
Harnessing a biopolymer hydrogel reinforced by copper/tannic acid nanosheets for treating bacteria-infected diabetic wounds	7
An oxygen-responsive sprayable hydrogel with microenvironment-improving and antibacterial properties for diabetic wound therapy	7
Accessing the solid electrolyte interphase on silicon anodes for lithium-ion batteries in-situ through transmission soft X-ray absorption spectroscopy	7
Deconstructed beetles: Bilayered composite materials produce green coloration with remarkably high near-infrared reflectance	7
Solmers: Versatile hybrid resins for nanometric 3D printing of silica-based photonic components	7
Harnessing highly efficient triboelectric sensors and machine learning for self-powered intelligent security applications	7
Gradual mechanical deformation discernible devices based on flexible self-powered Ⅲ-nitride pin photoelectrochemical piezo-phototronics	7
BSA-assisted synthesis of nanoreactors with dual pH and glutathione responses for ferroptosis and photodynamic synergistic therapy of colorectal cancer	7
Rapidly screening out refractory metallic alloys with high glass-forming ability by laser surface remelting	7
Macroscopically ordered phase separation: A new strategy for improving the superconducting performance in Fe(Se, Te)	7
Significantly boosted photoelectrochemical water splitting performance by plasmonic enhanced Hematite@MOF composite photoelectrodes	7
Synaptic transistor implementing potentiation or depression via field distribution modulation of dual dielectric layers by single-polarity pulsed voltage stimuli	7
Harnessing chitosan and poly-(γ-glutamic acid)-based biomaterials towards cancer immunotherapy	7
Three-dimensional highway-like graphite flakes/carbon fiber hybrid electrode for electrochemical biosensor	7
Construction of a 3D/2D plasmonic Z-scheme heterojunction with electrostatic self-assembly for full-spectrum solar-light driven photocatalytic protons reduction	6
Advancing cancer immunotherapy: Small-Molecule, biomacromolecular, and nanoscale PROTACs targeting PD-L1 for degradation	6
Overview of powder forming research on Nb-Si-based ultra-high temperature alloys	6
Delivery of 5-fluorouracil modified MicroRNAs by fucoidan-based magnetic nanoparticles to enhances tumor-localized immunotherapy and chemotherapy	6
One parallel in early oxidation stages of Cr-containing alloys	6
Tunable single-atom nanozyme catalytic system for biological applications of therapy and diagnosis	6
Multicolor sensing of organic-inorganic hybrid heterostructure: From visible to invisible colors	6
Multifunctional drug in drug nano-assembly with antibiofilm and remineralization for preventing dental caries	6
Combinational effect of NiFeOx/Tb(OH)x as hole extractor for enhanced charges separation and stability of BiVO4 photoanode for solar water splitting	6
Visualizing electrothermal dynamics in ovonic threshold switches via in-situ thermoreflectance for enhanced reliability	6
A multifunctional platform with metallacycle-based star polymers and gold nanorods for combinational photochemotherapy	6
Internal and external co-induction pineal 3D printed scaffolds for bone and blood vessel regeneration	6
Force transmission and dissipation in dynamic compression of architected metamaterials	6
Editorial Board	5
MOCVD-grown ε(κ)-Ga2O3 with highly preferred orientation for memristor applications	5
Additively manufactured flexible piezoelectric lead zirconate titanate-nanocellulose films with outstanding mechanical strength, dielectric and piezoelectric properties	5
A new paradigm in electron microscopy: Automated microstructure analysis utilizing a dynamic segmentation convolutional neutral network	5
MRI-activated magnetoelectric nanoparticles as theranostic agents	5
Truncated vascular endothelial cadherin enhances rapid endothelialization of small diameter synthetic vascular grafts	5
Interpretable machine learning boosting the discovery of targeted organometallic compounds with optimal bandgap	5
PDGF-B conjugating mesoporous IO/GdO nanocomposites for accurate diagnosis of orthotopic prostatic cancer through T1-T2 dual-modal MRI contrast enhancement	5
Heteroepitaxially grown homojunction gallium oxide PN diodes using ion implantation technologies	5
CO2-Responsive drug delivery system created by supramolecular design and assembly for safer, more effective cancer therapy	5
Pressure-induced hypercoordination of iodine and dimerization of I2O6H in strontium di-iodate hydrogen-iodate (Sr(IO3)2HIO3)	5
Impact of ion implantation on the performance of AlGaInP Micro-LEDs	5
Design and WLED application of KAlSiO4:Eu2+, Mn2+ phosphors with high quantum efficiency and high color stability prepared by a refiring strategy	5
Non-resonant phase sensitive approach for time resolved microwave conductivity in photoactive thin films	5
On-demand pitch tuning of printed chiral nematic liquid crystal droplets	5
Potentialities of graphene and its allied derivatives to combat against SARS-CoV-2 infection	5
Multimodal and dynamic cross-linking of modular thiolated alginate-based bioinks	5
Combination of photothermal, prodrug and tumor cell camouflage technologies for triple-negative breast cancer treatment	5
Formulation and evaluation of 3D-printed dressings loaded with curcumin and levofloxacin for wound healing application	5
Silk fibers assisted long-term 3D culture of human primary urinary stem cells via inhibition of senescence-associated genes: Potential use in the assessment of chronic mitochondrial toxicity	5
Editorial Board	5
Influence of PEGylated porous silicon nanoparticles on permeation and efflux of an orally administered antibiotic	5
A bar of cutting fluid: Deep Eutectic Fluids with a novel flavour	5
High performance aqueous asymmetric supercapacitors developed by interfacial engineering wood-derived nanostructured electrodes	5
Hypoxia-responsive nanomedicine to overcome tumor microenvironment-mediated resistance to chemo-photodynamic therapy	4
Synergistically engineered 2D MXenes for metal-ion/Li–S batteries: Progress and outlook	4
Nb4N3TX MXene decorated Bi2WO6/NbSe2 S-scheme heterojunction with improved optoelectronic and photoelectrochemical properties: Experimental and In-silico studies	4
Microporosity engineered printable silk/graphene hydrogels and their cytocompatibility evaluations	4
Intracellular delivery of messenger RNA to macrophages with surfactant-derived lipid nanoparticles	4
“Like dissolves like” enables the synergy of fluorinated additive and fluorous solvent soaking for high-performance organic solar cells	4
High-performance piezoelectric 2D-single crystalline BaTiO3 /chitosan composite-based triboelectric nanogenerator for vibrational energy harvesting and game controller	4
Not only a matter of disorder in I-WP minimal surface-based photonic networks: Diffusive structural color in Sternotomis amabilis longhorn beetles	4
Femtosecond-DLIP on tin-alloyed bronze: Effect of pulse fluence on surface topography for antibacterial application	4
Editorial Board	4
Dimethylacrylamide-based gels for expansion microscopy across different solvents	4
Strategy to weaken the oxygen adsorption on single-atom catalysts towards oxygen-involved reactions	4
High-frequency 5G substrate: Low dielectric biphenyl polyimide with low CTE and high thermal stability	4
2D metallic vanadium dichalcogenides and related heterostructures	4
Heterojunction nanoarchitectonics of WOx/Au-g-C3N4 with efficient photogenerated carrier separation and transfer toward improved NO and benzene conversion	4
Non-metallic multifunctional PVDF – Graphene nanoplatelets nanocomposites as an effective electromagnetic shield, thermal and electrical conductor	4
Coaxial electrospun Cu-CGRP/PLLA dressing spatiotemporally orchestrates immune-reparative dynamics in infected wounds	4
Self-assembly of caragana-based nanomaterials into multiple heteroatom-doped 3D-interconnected porous carbon for advanced supercapacitors	4
Achieving illustrious friction and corrosion resistance on a laser powder bed fusion nitinol rare earth alloy	4
Stimuli-responsive polyprodrug for cancer therapy	4
Multifunctional miR181a nanoparticles promote highly efficient radiotherapy for rectal cancer	4
A highly flexible form-stable silicone-octadecane PCM composite for heat harvesting	4
On the synergistic interplay between annealing temperature and time and additive concentration for efficient and stable FAPbI3 perovskite solar cells	4
Role of surface terminations in the chemical stability of CH3NH3PbI3 perovskite in combined light, H2O, and O2 environments: DFT/AIMD calculations and experimental validation	4
An integrated flexible sensor for decoupled omnidirectional strain and human motion monitoring	4
Corrigendum to “Controlled photodegradable hydrogels with photolithographic microstructure arrays as 3D scaffolds for cell culture” [Mater. Today Adv. 25 (2025) 100561]	4
In situ probing of structural transformations in nanostructured Au–Ge by correlative electron microscopy and calorimetry	4
Red blood cell membrane functionalized biomimetic nanoparticles for systemic lupus erythematosus treatment	4