Materials Today Sustainability

Article	Citations
Defect-rich carbon nanosheets promoting power density of lithium-ion capacitors in redox electrolyte system	180
Matrix curing and stress field development around fiber during the solvent evaporation-induced repolymerization of recycling composites	160
Non-PGM hollow fibre-based after-treatment for emission control under real diesel engine exhaust gas conditions	121
Space-confined engineering boosted high-performance of ultrafine nickel selenide nanocomposites for sodium-ion capacitors	92
Highly sensitive and biocompatible Tyrosinase sensor based on one-step synthesis of carbon dots	92
Roles of experimental variables in optimised fabrication of microrecycled CuO-based photoelectrodes	90
Regulated lithium deposition behavior by an artificial coating of Cu foil for dendrite-free lithium metal batteries	85
An intrinsic phase change elastomer with superior stretchability and reparable capabilities for self-thermal managing stretchable electronics	77
Aerogels for sustainable CO2 electroreduction to value-added chemicals	76
Investigating degradation & mitigation strategies for proton conducting membrane in proton exchange membrane fuel cell: An approach to develop an active & stable membrane	64
A review of future directions in the development of sustainable carbon fiber from bio-based precursors	59
Optoelectronic properties of GaP:Ti photovoltaic devices	59
First-principles study of GeC/Ga2SO heterostructure as a potential direct Z-scheme photocatalyst for water splitting	57
Unraveling the toluene adsorption mechanism of MIL-101(Cr) derived from PET waste for COV removal applications	55
Clay nanostructures in geotechnical engineering: A critical review of mechanisms, performance, and sustainable soil stabilization	53
Improving NiSe2 HER performance by controlling crystallinity and stabilizing embedded selenium	52
DFT and TD-DFT studies of perovskite materials LiAX3 (A=Ge, Sn; X= F, Cl, Br, I) in reference to their solar cell applications	51
Efficient and eco-friendly preparation of N/P/O co-doped porous carbon electrode for zinc-ion hybrid supercapacitors by laser carbonization	50
Self-assembled Cu doped NiO loaded reduced graphene oxide: Multifunctional photothermal framework for interfacial water evaporation, disinfection and power generation	49
Development of biodegradable films reinforced with silver functionalized cow milk carbon dots for active food packaging applications	49
Tailored transition metal-doped TiO2@Fe3O4 nanohybrids for efficient photocatalytic dye removal: Optimization via neural networks and response surface approaches	47
Unveiling host-guest interactions and stability of amine-functionalized silica sorbents for carbon capture	47
Development of poly(n-alkylene oxalate)s toward a new kind of seawater degradable plastics	46
Photoluminescence and supercapacitor applications of dysprosium doped rhombohedral silver gallium oxide nanoparticles	46
n-Si/p-Sb2Se3 structure based simple solar cell device	45

Coordinated disposal of FGD gypsum and power plant concentrated brine via preparation of α-hemihydrate gypsum	44
High entropy alloys prepared by spark plasma sintering: Mechanical and thermal properties	43
Evaluation of bioaerosol inactivation ability of chitosan-based biohybrid nanofibers loaded with aloe vera mediated silver nanoparticles: Sustainable material for environmental protection	42
Predicting high-performance perovskite solar cells using AI-based machine learning models	42
Melamine-based materials and composites for catalytic applications in organic synthesis	41
A bibliometric analysis on the development trend of graphene-based transparent conductive electrodes (2009–2022)	38
Advances in photocatalytic environmental and clean energy applications of bismuth-rich oxy halides-based heterojunctions: a review	36
Sustainable engineering of wool keratin towards cobalt atoms fixation for enhanced electrocatalytic water splitting	35
Natural organic matter (NOM), an underexplored resource for environmental conservation and remediation	35
Efficient piezocatalytic hydrogen peroxide generation over MAX phase piezocatalysts	35
Low-temperature hydrothermal carbonization of activated carbon microsphere derived from microcrystalline cellulose as carbon dioxide (CO2) adsorbent	35
Conversion of waste into sustainable construction materials: A review of recent developments and prospects	34
Carbonation of supplementary cementitious materials and slag aggregates: Enhancing strength, durability, and CO2 sequestration in mortar	34
Utilization of sugarcane bagasse ash in binary, ternary, and quaternary blended cement concrete –A waste to Wealth approach	33
Converting fruit waste into carbon dots for bioimaging applications	33
Ultra-hybrid sensor based on magnetic and fluorescent biomaterial for the sensitive/selective detection of toxic Ag+ and Hg2+ ions in real samples	33
A green and low-cost approach to recover graphite for high-performance aluminum ion battery cathode	33
Layered silicate PLS-3 with PREFER structure supported Pd nanoparticles: A recyclable catalyst for the synthesis of furfuryl ethyl ether	32
Recent advances and perspectives on Sb2S3 thin-film solar cells	31
Hybrid architecture of Multiwalled carbon nanotubes/nickel sulphide/polypyrrole electrodes for supercapacitor	31
Investigating the effects of MWCNTs on sustainable alkali-activated mortar: physical, rheological, and mechanical analysis	30
Emerging opportunities in the valorisation of wheat bran byproduct as additive in polymer composite materials	30
Painting sustainable wearables: facile and economical all-recycled dual temperature-motion wearable sensor for monitoring of human temperature and joint movements	30
Photocatalytic CO2 reduction to C1–C5 hydrocarbons using K2Fe2O4/g-C3N4 as coupling photocatalyst	29
Selective sensing of explosive nitrophenol compounds by using hydrophobic carbon nanoparticles	29
Preparation of toughened thermal insulating polylactic acid/thermoplastic polyester elastomer (TPEE) microcellular foam using in situ fibrillation and multi-hydrazide nucleating agent self-assembly	29
Cerium-based metal–organic framework-conducting polymer nanocomposites for supercapacitors	29
Synthesis, properties, and state-of-the-art advances in surface tuning of borophene for emerging applications	29
A comprehensive review on polyurethane-based membranes for enhanced CO2 separation: From molecular engineering to industrial scalability	29
A dye-sensitized solar cells with an efficiency of 10.01% based on the MoP/MoNiP2@Ti3C2 composite counter electrode	29
Effects of different scanning speeds on microstructure evolution and tribological properties of Inconel 718 alloy vacuum electron beam surface modification	29
A soluble and recyclable polymeric adsorbent of intrinsic microporosity for CO2 capture	29
Recent developments in CO2 permanent storage using mine waste carbonation	28
Cu-based materials as co-catalysts for photocatalytic CO2 reduction: A mini review	28
Emerging borophene two-dimensional nanomaterials for hydrogen storage	27
One-pot synthesis of regenerative calcium counterions from waste chicken eggshells for SO2-to-sulfur reduction	27
A semi-conductive rigid polyurethane foam derived from kraft lignin polyol and a PEDOT: PSS coating	26
Theoretical studies on the role of water in ionic liquids at ZIF (IL@ZIF) complex and its effect on selective CO2 separation	26
Biomimetic MOFs/GO membranes with enhanced charge density for osmotic power generation	26
Actinomorphic-structured nickel oxide/graphene composites treated with stearic acid on cellulose-based substrate for humidity-to-energy harvesting applications	26
Flower-like bismuth oxycarbonate-mediated selective oxidative cleavage of C–C bond in the presence of molecular oxygen	26
Adsorption behavior of Mg–Al layered double hydroxide on Pb(Ⅱ), Zn(Ⅱ), Cd(Ⅱ), and As(V) coexisting in aqueous solution	26
Upcycling post-consumer PET bottles into low-density films and 3D-printed materials	25
Hydrothermal synthesis of transition metal oxides, transition metal oxide/carbonaceous material nanocomposites for supercapacitor applications	25
A review on versatile metal vanadates photocatalysts for energy conversion and environmental remediation	25
Insights into the structure sustainable evolution and crystallization kinetics of amorphous Mg60Ni30La10 alloy	25
An N,P,O-doped porous carbon electrode material derived from a lignin-modified chitosan xerogel for a supercapacitor	25
Atomic-scale planarization surface of quartz glass induced by novel green chemical mechanical polishing using three ingredients	25
Design and fabrication of low-cost renewable carbon electrode materials and their thermo-kinetics for sustainable energy storage applications	25
Sustainable biowaste-derived carbon aerogel/MXene composite for mercury removal from water	25

Recent advances in porous organic polymers (POPs): The emerging sorbent materials with promises towards toxic and radionuclides metal ions separations	25
O2-promoted photodoping for enhanced photocurrent on polymeric carbon nitride	25
High entropy alloy reinforced lightweight metal matrix composites: A review of the fundamentals, fabrication, properties, and prospects	25
Recent advances in MXene-based anode materials for alkali metal-ion capacitors	24
Deep yellow emission and high energy device applications of copper doped orthorhombic zirconium titanate nanoparticles	24
Researching the design of a glass-bead retro-reflective material to reduce downward reflection for urban heat island mitigation	24
Multifunctional role of Thiourea in engineering electrodeposited NiFe catalysts for efficient and durable oxygen evolution reaction	24
Preparation and combustion behavior of carbon-based synfuel from biomass/coal/CaO by co-carbonization process	24
The interfacial charge change enhanced by Pr0.6Sm0.4Co0·8Mn0·2O3 activated peroxymonosulfate was used for the efficient degradation of tetracycline under the nanoscale domain limiting and distance eff	24
Synthesis and cryogenic performance of closed-loop recycled Al2O3/epoxy resins composites	24
Magnetic-field-assisted electrodeposition regulates the Ni:Fe ratio for water oxidation	24
Molybdenum-doped Ni–S nanostructure towards energy saving for hydrogen production coupling urea oxidation reaction	24
Sustainable approach for corrosion control in mild steel using plant-based inhibitors: a review	24
Porous materials prepared from eco-friendly attapulgite and gallnut stabilized aqueous foam templates for high-efficient removal of organic pollutants	24
Roles of molecular structure of carbon-based materials in energy storage	23
Enhanced thermoelectric performance of Bi2Te3 by carbon nanotubes and silicate aerogel co-doping toward ocean energy harvesting	23
Magnetically separable ZnFe2O4 grafted g-C3N4/rGO ternary nanocomposites for enhanced photo-Fenton catalytic activity under visible light	23
Synthesis, mechanisms, challenges, and future prospects of Ti3C2 MXene and its heterojunctions for photocatalytic dye degradation efficiency: a comprehensive review	23
Assessment of AutoML frameworks for predicting compressive and flexural strength of recycled aggregate concrete	22
Facile fabrication of novel In2S3–BiOCl nanocomposite-supported porous polymer monolith as new generation visible-light-responsive photocatalyst for decontaminating persistent toxic pollutants	22
Degradable hydrogels: Design mechanisms and versatile applications	22
A comprehensive review of various biopolymer composites and their applications: From biocompatibility to self-healing	22
Solar brilliance unleashed: Maximizing performance of novel carbon-based Rb-doped CsSnI3 perovskite solar cells by gradient doping	22
Performance evaluation of waste phosphogypsum-based solidified sludge: From laboratory test to field application	22
Critical insights and recent updates on passive battery thermal management system integrated with nano-enhanced phase change materials	21
Micro/nanomotors for metal ion detection and removal from water: A review	21
Two-dimensional molybdenum oxides and sulfides for energy systems: Toward efficient and eco-friendly solutions	21
Integration of water-retaining polymers into cemented soil to revegetate steep rock-cut slopes in hydropower projects	21
Investigation of CO2 sequestration performance and statistical analysis of dye removal efficiency of liquefied hornbeam based carbon foams: Effects of biomass/solvent weight ratio, tar contribution, a	21
Hybrid human energy harvesting method of MTEG-TENG based on a flexible shared substrate	21
Electrodeposition of hydroxyapatite and graphene oxide improves the bioactivity of medical grade stainless steel	21
Epoxy primer topcoat syncretic coating prepared by using modified graphene oxide incorporated with TiO2 nanoparticles	20
Influence of forging pretreatments on microstructure evolution and surface roughness of Al 6061 alloy	20
Heteroatoms (B, N, and P) doped on nickel-doped graphene for phosgene (COCl2) adsorption: insight from theoretical calculations	20
Tuning the Fe–N4 electrocatalytic CH3NO2 reduction reaction based on axial ligands: A computational study	20
Nanosized copper stabilized on ternary P, N, S-doped graphene from chitosan shellfish waste: preparation and catalysis of single and double A3-type amine coupling	20
Utilizing 3-aminophenol formaldehyde resins microspheres for the synthesis of three-dimensionally ordered macroporous oxides	20
Facile scalable multilevel structure engineering makes Ti0.667Nb1.333O4 a new promising lithium-ion battery anode	19
Sb2(S, Se)3-based photovoltaic cell with MoS2 as a hole transport layer: a numerical investigation	19
Sustainable nonlinear optical properties of green Cumin extract: Cuminaldehyde as a natural bio-chromophore for green photonic applications	19
Energizing geriatric healthcare: A triboelectric energy harvester with self-powered morse code generator and IoT-Enabled remote sensing tactile patch	19
Low-cost and sustainable nanosilver decorated on hydroxyapatite from fishbone for effective reduction of organic compounds in aqueous solution	19
3D printing piezoelectric materials: Innovations, challenges, and future perspectives	19
Recent progress in solid polymer electrolytes with various dimensional fillers: a review	19
Achieving highly anisotropic three-dimensional, lightweight, and versatile conductive wood/rGO composite	19
Trends and perspectives on bacterial nanocellulose: A comprehensive analysis from the three helixes of innovation	19
Superabsorbent incorporating coal gasification fine slag for enhanced water absorption	19
Coal gasification slag for preparation of environmentally friendly superabsorbent composites with rapid water absorption and salt tolerance	19
Sustainable chitosan hydrogen derived platinum/N-doped carbon aerogel for efficient oxygen reduction and hydrogen evolution reactions	18
Melem Hydrate-Derived g-C3N4 Micro-Rods Coordinated with Cu2+: Why is Cu a superior cocatalyst compared to Ni and co?	18
Metal-organic frameworks (MOFs), covalent organic frameworks (COFs), and hydrogen-bonded organic frameworks (HOFs) in mixed matrix membranes	18
Water-driven photovoltaics: Enhancing performance through water media in the active layer	18
Importance of optimising electrodeposition parameters for scalable and cost-effective manufacturing of Cu catalysts for efficient electrochemical CO2 reduction to renewable fuels and chemical feedstoc	18
Harnessing plant extracts for green nanoparticle synthesis: Toward a sustainable future	18
Recent advances in functionalized porous adsorbents for radioactive waste water decontamination: Current status, research gap and future outlook	18
Biomass-based carbon microspheres for removing heavy metals from the environment: a review	18
High-demand biopolymers for the plastics industry’s transformation — a technical, economic and environmental assessment of production processes	18
Synergistic sorption: Enhancing arsenic (V) removal using biochar decorated with cerium oxide composite	18
Microwave-synthesized heteroaromatic porous organic polymers for CO2 capture and hydrogen storage	18
Pump-inject antimicrobial and biodegradable aerogel as mask intermediate filter layer for medical protection of air filtration	18
Hydroxyethyl cellulose/boron nitride nanosheet films coated with silver nanowires for electronic packaging applications	18
Experimental and numerical study on flexural properties of shredded prepreg carbon cloth waste fibre reinforced concrete	18
Form-stable phase change composites with multistage pores based on black phosphorus nanosheets/PVA aerogel for efficient solar photothermal conversion	18
A critical analysis of electric arc furnace (EAF) slag for sustainable geopolymer concrete production	18
Algae-powered innovation: A critical review of sustainable textile dyeing and functionalization strategies	17
Unlocking the potential of mixed-valence silver oxide for electrochemical valorization of 5-hydroxymethylfurfural into valuable products	17
Boosted ultrasound-sunlight-driven removal of organic pollutant over double Z-scheme plasmonic ZnO–Cu–CuO/g-C3N4 nanophotocatalyst: design via in-situ co-precipitation hybrid with various sonication p	17
Bimetallic AgNi co-catalyst modified g-C3N4 nanosheets for highly efficient photocatalytic hydrogen evolution	17
Research progress and prospect of copper oxide nanoparticles with controllable nanostructure, morphology, and function via green synthesis	17
From light to chemicals: Breaking ground in photocatalytic H2O2 production for a sustainable future	17
A comprehensive review of metal-organic frameworks sorbents and their mixed-matrix membranes composites for biogas cleaning and CO2/CH4 separation	17
Review of electrolyte strategies for competitive dual-ion batteries	17
The prospect and limitation of high entropy alloy as 4th industrial material	17
In-situ growth of metal coordination-synergistic imprinted polymer onto shrimp shell-derived magnetic FeNi biochar for specific recognition of monocrotaline in herbal medicine	17
High-performance anion exchange membrane water electrolysis by polysulfone grafted with tetramethyl ammonium functionalities	17
Heavy metal detection in water using MXene and its composites: A review	17
Tuning overall water dissociation performance in Fe–Ni–Co layered hydroxides via S, P, and B doping: Experimental and theoretical study	16
Energy-efficient scientific-technological approaches to the processing of plastic waste PET, PE, PP, PS to produce hydrogen-containing gas and titanium carbide powder	16
Two-step electrodeposition to achieve durable IrOx electrode with a semi-crystalline structure for efficient OER	16
Sustainable and eco-friendly brake pads: Ensuring reliable copper-free performance with minimal steel fiber	16

Unraveling lithium-ion intercalation in lead-free bismuth-based vacancy ordered halide perovskites supercapacitors	16
Prediction of state-of-health of lithium-ion battery based on CEEMDAN-SG-LSTM combined model	16
Boosting photocatalytic hydrogen evolution via synergistic effects between 4H–SiC and tetrapyridylporphyrin	16
Facile ligand-regulated synthesis of defective Fe-MOF nanosheets for efficient tetracycline degradation via photoassisted enhanced activation of persulfate	16
Electrodeposition synthesis of Cu2ZnSnS4(CZTS) thin films as a promising material for photovoltaic cells: Fundamentals, methods, and future prospects - A comprehensive review	16
A class of promising fuel cell performance: International status on the application of nanofluids for thermal management systems	15
Carbon dots encapsulated in (YGd)2O3:Eu3+ nanophosphors for thermal sensing, advanced forensic and information security applications	15
Harnessing Ti3C2-WS2 nanostructures as efficient energy scaffoldings for photocatalytic hydrogen generation	15
BiOX(X=Cl, Br, I)-based S-scheme heterostructure photocatalysts for environmental remediation and energy conversion	15
On performance of thin-film meso-structured perovskite solar cell through experimental analysis and device simulation	15
Highly efficient removal of phosphate by mesoporous Zr-modified calcium silicate hydrate from fly ash	15
Induced porous structure with a slight change in mechanical properties of hydroxyapatite-based nanocomposites synthesized from waste bovine bone and their bioactivity	15
Synaptic-like memristor for male sperm DNA fragmentation diagnosis	15
Novel Indium nanocomposites for Photonic applications	15
Solar steam generation using hybrid nanomaterials to address global environmental pollution and water shortage crisis	15
An overview of composites as construction materials for the Development of sustainable structures	15
Rutile titanium dioxide and graphene-like OCN tailoring free-standing carbon fiber aerogel as polysulfide anchoring materials for lithium–sulfur batteries	15
Biorefining of rice husks into sustainable nanoparticles for reinforced polyvinyl alcohol composites	15
Rationally designed bulky MoS2@C@MoS2 hierarchical materials as an enhanced anode for lithium-ion batteries	15
Waste-to-energy material: Winery-waste derived heteroatoms containing graphene-like porous carbon for high-voltage supercapacitor	14
Quantum-chemistry-computing and experimental development of a new n-alkenyl amino propionic and imino di-propionic acids-based gum inhibitor for gasoline	14
Nitrogen-doped carbon dots as green materials for sensitive and selective detection of isorhamnetin	14
Agro-food waste upcycling into mycelium insulation: Linking structure with mechanical and fire performance	14
Recycling of waste coal-based filter materials into carbon anode materials for potassium and sodium-ion batteries	14
Proximate white light-long phosphor emission and a photoelectrochemical probe from boron defects engineered carbon-nitride nanosheets	14
Improving the cycling stability of biochar electrodes by purification via ion exchange	14
Photothermal superhydrophobic surfaces with dual self-healing capabilities	14
The use of biobased polymeric materials as membrane technologies for CO2 capture and separation: a review	14
A pH-Responsive flavylium surfactant as a recyclable hydrophobic modifier for selective aggregation and flotation of kaolinite	14
Promoting the electrochemical performance of commercial LiMn2O4 by hydrothermal modification with poly (vinylidene fluoride)	14
Bio-approach ZnO/Ag nano-flowers: enhanced photocatalytic and photoexcited anti-microbial activities towards pathogenic bacteria	14
Aminated nanocellulose-mediated synthesis of polyaniline/nanocellulose hybrid materials for sustainable conductive and supercapacitors nanopapers	14
Self-supported IrMnFeCoNiOx high entropy spinel as acid resistant and active oxygen evolution catalyst	14
Nontoxic and earth-abundant Cu2ZnSnS4 (CZTS) thin film solar cells: A review on high throughput processed methods	13
Synthesis of a bio-based and intrinsically anti-flammable epoxy thermoset and the application of its carbonized foam as an efficient CO2 capture adsorbent	13
Interface engineering of composite systems: Focusing on the compatibility of reduced graphene oxide and Bi0.8La0.1Ba0.1Fe0.9Ti0.1O3 hybrid systems	13
Natural substance-mediated synthesis for biochar-supported nanoscale zero-valent iron enhanced the performance of the catalytic process	13
Production methods for bacterial biomaterials: A review	13
Application of molecularly imprinted polymers in the water environmental field: A review on the detection and efficient removal of emerging contaminants	13
Process optimization and characterization of cottonseed biodiesel using Box Behnken design and artificial neural network approaches	13
Enhancing latent heat storage: Impact of geometric modifications, S-shaped enclosure walls, and L-shaped fins	13
Biobased epoxy resins obtained from resorcinol epoxy monomer and anhydrides	13
Boosting the oxygen bifunctional activity on cobalt nanocrystals/RGO with extended durability	13
Wide application of metal-organic frameworks in lithium–sulfur battery	13
Synthesis of dimethyl carbonate from CO2 and methanol over CeO2 catalysts prepared by soft-template precipitation and hydrothermal method	13
Green magnesium oxide prepared by plant extracts: synthesis, properties and applications	13
Low-pressure air plasma-treated polytetrafluoroethylene surface for efficient triboelectric nanogenerator	13
Alkalized MXene-supported nanoscale zero-valent iron in situ derived from NH2-MIL-88B(Fe) for the highly efficient catalytic reduction of 4-nitrophenol	13
Indoor CO2 removal: decentralized carbon capture by air conditioning	13
Methane oxidation on ion-doped ceria catalysts	13
Interaction of organic-inorganic hybrid perovskite electron system with lattice system	13
Surface modification of copper selenide for reliable non-enzymatic glucose sensing	13
Opportunities and challenges in utilizing of 3D printing technology review; Case study in the state of Qatar industry	13
Catalytic mechanisms of dual atom catalysts to facilitate electroreduction of carbon dioxide	13
Amorphous electrocatalysts for oxygen and hydrogen evolution reactions: Advances in hydrogen production	13
Dielectric nanofluids for transformer cooling: Performance, challenges, and towards smart and sustainable thermal management	12
Thiazolyl-linked conjugated microporous polymers for enhancement adsorption and photocatalytic degradation of organic dyes from water	12
Biosynthesis of Pt doped Zn bimetallic nanoparticles by using Polygonum glabrum extract for colorimetric, fluorimetric (Ni2+, Hg2+ and Fe2+) ions sensing and photocatalytic degradation of organic dye	12
Enhanced dehydroaromatization of methane with methanol on Mo-ZSM-5/ZSM-11 intergrown zeolite materials	12
The application of green synthesis nanoparticles in wound healing: a review	12
Replacing synthetic polymer electrolytes in energy storage with flexible biodegradable alternatives: sustainable green biopolymer blend electrolyte for supercapacitor device	12
Biosynthesis of gold nanoparticles by a mining- adapted bacterial consortium: Physicochemical properties and environmental applications	12
Lignin and its carbon derivatives: Synthesis techniques and their energy storage applications	12
Process optimization and performance evaluation of back contact integrated cooling devices for CPV cells	12
High performance all lignin derived supercapacitors for energy storage applications	12
Schottky-Functionalized Type-II heterojunction of Ag/CuNb2O6/g-C3N4: Efficient photoredox capability of CO2 to valuable fuel products via gas phase adsorption	12
Bifunctional mesoporous silica solid acids for transformation of glucose to 5-hydroxymethylfurfural	12
An overview of metal-organic frameworks-derived carbon as anode materials for sodium- and potassium-ion batteries	12
Recent advance of atomically dispersed catalysts for direct methane oxidation under mild aqueous conditions	12
Waste frying oil derived carbon nano-onions as a cost-effective cathode material for high-voltage zinc-ion hybrid supercapacitors	12
Sustainable solution to the recycling of spent SCR catalyst and its prospective gas sensor application	12
An insight into the application and progress of artificial intelligence in the hydrogen production industry: A review	12
A comparative study on modification of aerogel-based biosorbents from coconut fibers for treatment of dye- and oil-contaminated water	12
Poly(lactic acid) nanofibers containing phosphorylcholine grafts for transdermal drug delivery systems	11
Constructing high-capacitance electrochemical capacitors through the introduction of V ions into MoS2/Ni3S2 nanosheets	11
Advances in nanotechnology in phase change materials and their applications	11
Synthesis of TiO2/copper-based oxide photocatalytic composites from copper smelting flotation slag for photocatalytic H2 evolution	11
Multifunctional polythiophene-based composites for environmental remediation and energy storage: A critical review	11
Plasmonic antenna enhancement on Pd cluster towards high selective FDCA production	11
Secondary carbon skeletons constructed in porous carbon for electric double layer capacitors	11
A step towards RoHS compliance for perovskite devices by using a novel lead-capturing encapsulant	11
The mechanism of hydride formation during electrochemical hydrogen charging of Ti–6Al–4V	11
Rapid and efficient mineralization of methylene blue dye (above 95 % in 20 min) catalyzed by ZnO nanoparticles under sunlight	11
Sustainable high-yield lignocellulosic fibers and modification technologies educing softness and strength for tissues and hygiene products for global health	11
Effect of temperature on CO2 corrosion inhibition by black tea extract: A combined experimental and molecular modelling study	11
A comprehensive review on utilization of waste materials in wood plastic composite	11
Optimal synthesis of zeolite materials for humidity control from recycled industrial waste: central composite design	11
Structure and performance of polyvinylchloride microfiltration membranes improved by green silicon oxide nanoparticles for oil-in-water emulsion separation	11
Controlled synthesis of nickel phosphides: Mechanistic insights and catalytic activity in hydrogen peroxide production	11
Selective production of hydrogen isotope gases via PdAg-catalyzed dehydrogenation of formic acid in D2O assisted by surface-grafted amine groups	11
Highly oriented (002) crystals zinc powder from recovery of zinc smelting slag	11
Milli-fluidic setup for continuous flow synthesis of organic semiconductor nanoparticles	11
The effects of pore shape and geometry on the storage of CO2 in mesoporous media	11
Carbon nanotubes ethylenediamine crosslinked membrane for enhanced hydrocarbons separation and filtration performance	11
Overcoming the SnO2 bottleneck in perovskite solar cells: Strategies for enhancing efficiency and stability	11