ACS Applied Energy Materials

Papers
(The TQCC of ACS Applied Energy Materials is 13. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Issue Editorial Masthead136
ZnxZrO2+x-Based Photocatalyst with Dual Active Sites for Tunable Syngas Production from CO2 Photoreduction125
Highly Active and Stable Cu-Based Anode Decorated with In Situ Fabricated CuFe Alloy Nanoparticles for Solid Oxide Fuel Cells124
In-Situ Growth of Sandwich-Like Ultrathin MnO2/Carbon/MnO2 Composite for Fast and Stable Kinetic Process of Lithium Storage121
Enhanced Charge Accumulation in Activated Carbon via the Dielectric Interface109
Boron Spin-On Doping for Poly-Si/SiOx Passivating Contacts94
Efficient and Stable Nonfused Ring Small Molecule Acceptors Powered by an Electron Donating Unit for Organic Solar Cells93
Factors Affecting the Electron Conductivity in Single Crystal Li7La3Zr2O12 and Li7P3S1187
Two Mixed-Anion Semiconductors in the Ba–Sn–Te–S System with Low Thermal Conductivity87
Poly(acrylic acid) Grafted with a Boronic Ester and Dopamine as a Self-Healable and Highly Adhesive Aqueous Binder for Si Anodes83
Activating Montmorillonite for Light-Driven Hydrogen Evolution with the Coupling of Fe Species83
High-Performance Sulfide All-Solid-State Batteries Enabled by High-Voltage Ni-Rich Cathode with a Conformal and Conductive Protective Layer81
Robust Polyaniline-silica@polypropylene for High-Performance, High-Capacity Retention All-Vanadium Redox Flow Battery76
Regulation of a Solid-Electrolyte Interphase and Ion Transfer via Organic Lewis Acid for Stable Li–S Pouch Cells76
Enhancement of the Li+ Conductivity of Li3AlF6 for Stable All-Solid-State Lithium-Ion Batteries74
Issue Editorial Masthead72
Optimized Structural Dimensionality of CuSbS2as an Anode Material in Sodium-Ion Batteries70
Li Morphology Evolution during Initial Cycles in a Gel Composite Polymer Electrolyte68
Oxygen Vacancy Migration in Ca2Ga2+xGe1–xO7–0.5x Melilite67
Rational Design of a Complete Solid-Solution Reaction P2-Type Na-Ion Layered Oxide Cathode with High Performance67
d-Orbital-Driven Low Lattice Thermal Conductivity in TiRhBi: A Root for Potential Thermoelectric and Microelectronic Performance65
Symmetrical Conjugated Molecular Additive for Defect Passivation and Charge Transfer Bridge in Perovskite Solar Cells65
N,N-Bis(9-methyl-3-carbazolyl)-4-anisidine as an Electroactive Material for Use in Perovskite Solar Cells65
Thermodynamic Assessment of CrCl2 with NaCl–KCl–MgCl2–UCl3–UCl4 for Molten Chloride Reactor Corrosion Modeling65
Increased Water Uptake of Li[Ni0.6Co0.2Mn0.2]O2 for Lithium-Ion Batteries in Humid Nitrogen above a Critical Gas Dew Point64
Improving the Photovoltaic Performance of PBDB-T:PC71BM-Based Ternary Solar Cells by Employing Arylmethylene-Substituted Small Molecules as the Guest Acceptor63
Pyrene-Tethered Telluroviologen Both as Cathode and Anode for All Organic Symmetrical Lithium-Ion Batteries62
Self-Flux Method in Sputtered BiVO4 Films for Enhanced Photoelectrochemical Performance62
First Hydrogenation Kinetics and Properties of Mechanically Treated Pure Mg62
Localized High-Concentration Binary Salt Electrolytes with Suppressed Li2Sx Solubility to Achieve Stable Li–S Pouch Cells with High Sulfur-Loading Cathodes under Lean Elec61
Preparation of High-Platinum-Load Platinum-on-Carbon Catalysts by Liquid-Phase Pressurized Hydrogen Reduction Using Platinum Nitrate Impregnation and High Specific Surface Area Carbon Carriers61
High Specific Activity during Electrochemical CO2 Reduction through Homogeneous Deposition of Gold Nanoparticles on Gas Diffusion Electrodes60
Fe/Co Bimetal-Containing Carbon Prepared from a 2D Metalloporphyrin-Based MOF for the Optimal ORR/OER Bifunction and Its Application in Zn–Air Batteries60
Deterministic Fabrication of 2D/3D Heterojunction for Efficient and Stable Carbon-Based Hole-Transport-Layer-Free Perovskite Solar Cells60
Tuning Silica Surface Properties for Enhanced Performance in Si–UHMWPE Battery Separators59
Spontaneous Cation Exchange-Induced Iron Doping in Ni(OH)2 for Enhanced Oxygen Evolution Reaction59
High-Capacity F-Doped Na0.7MnO2.05 with Balanced Voltage Distribution for Decoupled Water Electrolysis58
Polyol-Assisted Dehydrogenation and Regeneration of Ammonia Borane: A Step toward the Identification of a Sustainable Hydrogen Storage Material58
Self-Assembly In Situ Selenization Engineering to Synthesize High-Performance Ag2Se Thin Films57
The Layer Oxide Cathode Exhibits Optimal Capacitance Cooperative Effects in Capacitor Batteries56
Hosting of Chlorine Species Promotes Performance of Vanadium Hexacyanoferrate as a Cathode for Aqueous Zinc Metal Batteries56
State-of-the-Art Carbon Cathodes with Their Intercalation Chemistry, Performance, and Challenges for Aluminum-Ion Batteries55
Enhancement of Z-Scheme Water Splitting Using Photocatalyst Sheets Fabricated by Simple Filtration of Long-Wavelength Visible-Light-Responsive Nonoxides and Carbon Nanotubes55
Electrospun CSNi3C/Fe3C@C/NFs-600 Embedded in Porous Carbon shell as an Efficient Electrocatalyst for Water Splitting at Industrial Driven Current Density55
Unveiling the Reactivity of Li1+xAlxTi2–x(PO4)3 with Lithium Salts to Reduce Its Sintering Temperature55
Multiple Types of Defect Passivation Using a Pyridine Derivative Modifier for Efficient and Stable Perovskite Solar Cells55
Reinforcing Bulk Heterojunction Morphology through Side Chain-Engineered Pyrrolopyrrole-1,3-dione Polymeric Donors for Nonfullerene Organic Solar Cells55
Fabrication of Affordable, Efficient, and Sustainable Carbon Electrode-based HTL-free Perovskite Solar Cells Using Azole Salts as Additive Material54
Exploration of High and Low Molecular Weight Polyacrylic Acids and Sodium Polyacrylates as Potential Binder System for Use in Silicon Graphite Anodes54
Issue Editorial Masthead54
Impact of Stabilizing Cations on Lithium Intercalation in Tunneled Manganese Oxide Cathodes53
One-Step Rapid Conversion of Electroactive CoMnO Nanostructures Using a Deep Eutectic Solvent as the Template, Solvent, and Source53
Organic Chain Length Effect on Trap States of Lead Halide Perovskite Scintillators52
Systematic Study of Oxygen Evolution Reaction Activity and Stability of SnnSbmNblOx Ternary Oxide-Supported IrO2 Cata52
Self-Assembly of Porphyrin to Realize the High Ionic Conductivity of Anion-Exchange Membranes52
Highly Active Isolated Single-Atom Pd Catalyst Supported on Layered MgO for Semihydrogenation of Acetylene51
2D Layered MnO2 with an Ultralarge Interlayer Spacing for Aqueous Zinc Ion Batteries50
Engineering COBridge Adsorption in Cu2O-TiO2 Heterojunction Catalyst for Selective Electrochemical CO2 Reduction to Ethanol50
Omnidirectional and Wideband Absorption of Solar Radiation with Light Funnel Arrays Incorporated with Quasi-Nanolenses50
Fe Substitutions Improve Spectral Response of Bi2WO6-Based Photoanodes49
Revealing Surface Charge Population on Flake-Like BiVO4 Photocatalysts by Single Particle Imaging Spectroscopies49
High-Energy-Density Asymmetric Supercapacitor Based on a Nickel Cobalt Double Hydroxide/Reduced-Graphene-Oxide Fiber Electrode49
High-Temperature Air Stability of Electrodeposited Copper Cobalt Oxide and Copper Manganese Oxide Absorber Coatings for Concentrating Solar Power49
Hybrid Nanostructure of Sputter Decorated Nanodots of Ag2O/AgO over Flower-like Mn–Co–Cu Ternary Metal Oxide for Electrocatalytic Oxygen Evolution Reaction49
General Approach to Synthesize Multilayer Graphitic Carbon-Nanotube-Encapsulated NiCo Alloys as Trifunctional Electrocatalysts: Deciphering the Role of N-Dopants49
Thermogalvanic and Thermocapacitive Behavior of Superabsorbent Hydrogels for Combined Low-Temperature Thermal Energy Conversion and Harvesting48
Catalytic Hexadecachlorophthalocyanine Cobalt-Coated Host Materials for Li–S Batteries48
Mitigating Interfacial Mismatch between Lithium Metal and Garnet-Type Solid Electrolyte by Depositing Metal Nitride Lithiophilic Interlayer48
Artificial Alloy/Li3N Double-Layer Enabling Stable High-Capacity Lithium Metal Anodes48
Single-Phase Perovskite SrIrO3 Nanofibers as a Highly Efficient Electrocatalyst for a pH-Universal Oxygen Evolution Reaction48
Perovskite/Silicon Tandem Solar Cells with a Voc of 1784 mV Based on an Industrially Feasible 25 cm2 TOPCon Silicon Cell48
Minimal Surfaces in Porous Materials: X-Ray Image-Based Measurement of the Contact Angle and Curvature in Gas Diffusion Layers to Design Optimal Performance of Fuel Cells48
Non-Uniform Deposition of N-CoP3 Films on Silicon-Based Photoelectrodes for Efficient Water Splitting47
MOF-Derived Porous Fe3O4/RuO2-C Composite for Efficient Alkaline Overall Water Splitting47
High-Performance Aqueous Electrochromic Battery for Smart Window Application: Mechanistic Insights of Al-Ion (De)Intercalation Kinetics in Thickness-Optimized WO347
Effects of Particle Size and Polytype on the Redox Reversibility of the Layered Na0.76Ni0.38Mn0.62O2 Electrode47
Rational Design and Synthesis of Adjustable Pt and Pt-Based 3D-Nanoframeworks47
Highly Efficient and Robust Composite Cathode with an In Situ Formed Proton Conductor for Protonic Ceramic Fuel Cells47
xLi6PS5Cl/(1 – x)(Perfluoropolyethers-ethoxy-diol/Lithium Bis(trifluoromethanesulfonyl)imide) Electrolyte for Superior Stability against a Metallic Lithium Anode47
Positional Effect of the 2-Ethylhexyl Carboxylate Side Chain on the Thiophene π-Bridge of Nonfullerene Acceptors for Efficient Organic Solar Cells47
Terephthalic Acid Surface-Functionalized Ni-Rich LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Performances47
Selective Electrochemical Generation of Hydrogen Peroxide from Oxygen Reduction on Atomically Dispersed Platinum47
Defective Ehanced Subnano-Rh Catalyst Supported on an Ni@Ni-N-C Substrate for Highly Efficient Hydrolytic Dehydrogenation of Ammonia Borane46
Enhanced Triple-Phase Interface in PEMFC by Proton Conductor Absorption on the Pt Catalyst46
Seed-Mediated Synthesis and Catalytic ORR Reactivity of Facet-Stable, Monodisperse Platinum Nano-Octahedra46
Ag Interstitial Inhibition and Phonon Scattering at the ZnSe Nano-Precipitates to Enhance the Thermoelectric Performance of Ag2Se46
Recycling Biowaste to Synthesize Nitrogen-Doped Highly Porous Activated Carbon Scaffolds for Selenium Stuffing with Superior Electrochemical Properties45
Toward Semitransparent PIN-type Perovskite Solar Cells with Sputtered ITO Electrode: Architecture and Process Optimizations45
Boosting Photocatalytic Hydrogen Evolution Activity by Accelerating Water Dissociation over Rh/Zn(OH)2 Catalyst in Alkaline Solution45
Ultralow Thermal Conductivity and Enhanced Thermoelectric Properties Realized in Polycrystalline Bi2S2Se via Carrier and Microstructure Modulation45
Hydrothermal Prepared Bramble-like Double Arrays NiCo2S4 Bifunctional Electrocatalysts for High-Efficiency Water Splitting45
Sn1–xGexOy and Zn1–xGexOy by Atomic Layer Deposition─Growth Dynamics, Film Properties, and C45
Efficient and Stable Nonfullerene Polymer Solar Cell Enabled by a Narrow-Bandgap, Nonplanar, Small-Molecule Acceptor with an Extended Main Chain45
Multifunctional Polymer Capping Frameworks Enable High-Efficiency and Stable All-Inorganic Perovskite Solar Cells45
Hybrid Particle Brush Coatings with Tailored Design for Enhanced Dendrite Prevention and Cycle Life in Lithium Metal Batteries44
Issue Publication Information44
Reversible Thermal Conductivity Modulation of Non-equilibrium (Sn1–xPbx)S by 2D–3D Structural Phase Transition above Room Temperature44
Issue Editorial Masthead44
A Red Light-Inducible Copper-Photodeposited All-Solid-State Z-Scheme Photocatalyst for Carbon Dioxide Reduction to Methane Using Water as an Electron Donor44
Branched Poly(ethylene glycol)-Functionalized Covalent Organic Frameworks as Solid Electrolytes43
Enhanced Photovoltaic Performance via a Bifunctional Additive in Tin-Based Perovskite Solar Cells43
A Squaraine-Linked Zwitterionic Covalent Organic Framework Nanosheets Enhanced Poly(ethylene oxide) Composite Polymer Electrolyte for Quasi-Solid-State Li–S Batteries43
Electrochemical Preparation of Iridium Hydroxide Nanosheets with Ordered Honeycomb Structures for the Oxygen Evolution Reaction in Acid43
Wide-Band Gap Small-Molecule Donors with Diester-Terthiophene Bridged Units for High-Efficiency All-Small-Molecule Organic Solar Cells43
Crystallization Kinetics Engineering toward High-Performance and Stable CsPbBr3-Based Perovskite Solar Cells43
Interstitial M+ (M+ = Li+ or Sn4+) Doping at Interfacial BiVO4/WO3 to Promote Photoelectrochemical Hydrogen Production42
Revolutionizing Lithium–Metal Batteries: A Synergistic Effect of P2O5 and LiNO3 Composite Protection Layer in Stabilizing the Li-Metal Anode Electrode42
In Situ Crystallization of the Inorganic Lead-Free Halide Double Perovskite Cs2AgBiBr6 via Spray-Drying42
Nonfused Ring Electron Acceptors for Efficient Organic Solar Cells Enabled by Multiple Intramolecular Conformational Locks42
Laser-Scribing Optimization for Sprayed SnO2-Based Perovskite Solar Modules on Flexible Plastic Substrates42
Insight into Controlled Surface Passivation of PEDOT:PSS for Defect Density Modulation and Efficient Charge Transport for Perovskite Solar Cells42
Flash Lamp Annealing Enables Thin-Film Solid-State Batteries on Aluminum Foil42
Enabling Ultrafast Charging in Graphite Anodes Using BIAN-Based Conjugated Polymer/Lithium Polyacrylate as a Binder42
RuO2 Nanostructure as an Efficient and Versatile Catalyst for H2 Photosynthesis42
Gadolinium-Doped Ceria–NaCoO2 Heterogeneous Semiconductor Ionic Materials for Solid Oxide Fuel Cell Application41
Preparation of Dual-Doped N/P Two-Dimensional Porous Carbon Nanosheets for High-Performance Alkaline Supercapacitors41
Crystallization of NiCo MOF-74 on a Porous NiO Film as an Anode for the Urea/H2O2 Fuel Cell41
Solution Processing Cu3BiS3 Absorber Layers with a Thiol–Amine Solvent Mixture41
Atomistic Mechanisms Underlying Non-Arrhenius Ion Transport in Superionic Conductor AgCrSe241
Grain Boundary Defects Passivated with tert-Butyl Methacrylate for High-Efficiency Perovskite Solar Cells41
Improved Thermoelectric–Photovoltaic Performance of Ag2Se Originating from a Halogenation-Induced Wider Band Gap and Low Crystal Symmetry41
Pyrrolopyrrole-1,3-dione-Based Wide Band-Gap Polymeric Donors Exemplify High Voltage and Diminutive Energy Loss for Efficient Binary and Tandem Nonfullerene Organic Solar Cells with Efficiency Exceedi41
Can a Coating Mitigate Molten Na Dendrite Growth in NaSICON Under High Current Density?40
Remarkable Thermoelectric Performance in K2CdPb Crystals with 1D Building Blocks via Structure Particularity and Bond Heterogeneity40
Electrochemically Synthesized Bis(diimino)metal Coordination Nanosheets as Ultrastable Electrocatalysts for Hydrogen Evolution Reaction40
Ceria-Spiderweb Nanosheets Unlock the Energy-Storage Properties in the “Sleeping” Triplite (Mn2(PO4)F)40
Precise Cathode Interfacial Engineering for Enhanced Electrochemical and Thermal Stability of Lithium-Ion Batteries40
Stability of Perovskite Films Encapsulated in Single- and Multi-Layer Graphene Barriers40
BiVO4-Dotted WO3 Photoanode with an Inverse Opal Underlayer for Photoelectrochemical Water Splitting40
One-Step Braiding of Flexible Coaxial Asymmetric Fibrous Supercapacitors40
Ionic Transport and Electrochemical Properties of NaSICON-Type Li1 + xHf2 – xGax(PO4)3 for All-Solid-State Lithium Batteries40
Interface Strategies for Enhancing the Lithium-Ion Transport of Composite Polymer Electrolytes toward High-Performance Solid-State Batteries40
Catalytically Active and Carbon-Resistive Anode Catalyst for Solid-Oxide Fuel Cells Operated at Low Temperatures (500–600 °C)39
Issue Editorial Masthead39
Decorating Lithium Titanium-Phosphate Carbon Layers with Mo2C as Efficient Li-Ion Storage Electrode39
High Rate Performance Flake Si/C Composite Anode Materials of Lithium-Ion Batteries by Oxidization of an Industrial Si–Ca Alloy with CaCO3 in Molten Salt39
Water-Induced Fine-Structure Disorder and Its Effect on the Performance of Photoelectrodes in Dye-Sensitized Solar Cells39
Neutral-Colored Semitransparent Perovskite Solar Cells with Aperture Ratios Controlled via Laser Patterning39
Efficient Ternary Polymer Solar Cells with Two Structurally Similar Fullerene-Free Acceptors to Redshift Absorption Peaks and Improve Exciton Dissociation39
Metal Ion Migration: A New Insight into the H+/O2– Dual-Ion Transport in Perovskite–Fluorite Composites39
Highly Elastic and Polar Block Polymer Binder Enabling Accommodation of Volume Change and Confinement of Polysulfide for High-Performance Lithium–Sulfur Batteries39
Effect of Two Different ZnO Addition Strategies on the Sinterability and Conductivity of the BaZr0.4Ce0.4Y0.2O3−δ Proton-Conducting Ceramic Electrolyte39
Facile Preparation of Binary Salt Hydrates/Carbon Nanotube Composite for Thermal Storage Materials with Enhanced Structural Stability38
Defective Nanoporous Zinc Cobaltite as a Potential Bifunctional Oxygen Electrocatalyst38
Directing Quasiparticle Movement in Graphitic Carbon Nitride through Spatial Engineering for Enhanced Photocatalytic Hydrogen Evolution38
Correction to “Confining Nano-GeS2 in Cross-linked Porous Carbon Networks for High-Performance and Flexible Li-Ion Battery Anodes”38
Binary Solvophilic/Solvophobic Network-Based Nonswelling Hybrid Electrolytes for Stable Lithium-Metal Batteries38
Densification Pressure Optimization of MOF-808-Based Membranes for Lithium Metal Batteries38
Issue Editorial Masthead38
Issue Editorial Masthead38
Characterization of Photochromic Dye Solar Cells Using Small-Signal Perturbation Techniques38
Issue Editorial Masthead38
Rocksalt and Layered Metal Sulfides for Li Storage Applications: LiMe0.5Ti0.5S2 (Me = Fe2+, Mn2+, and Mg2+)38
Structure Manipulation of C1N1-Derived N-Doped Defective Carbon Nanosheets to Significantly Boost K-Storage Performance38
Mechanistic Understanding of Visible-Light-Driven Hydrogen Evolution on Pt Sites in Organic Nanohybrids Enhanced with Hydroxyl Additives37
Controlled Preparation of Zn–Co–S Nanosheet Arrays for High-Performance All-Solid-State Supercapacitors37
Rational Design of a Hierarchical Candied-Haws-like NiCo2O4@Ni,Co-(HCO3)2 Heterostructure for the Electrochemical Performance Enhancement of Supercapacitors37
Boosted Charge Separation in Core@Shell N-Ta2O5@α-Fe2O3 Heterojunctions via Band Structure Engineering for Enhanced Visible-Light-Driven Photoelectrocatalyt37
Issue Publication Information37
Storage Performance and Structure Degradation Mechanism of Single-Crystal Ni-Rich Material37
Effects of the Nb2O5-Modulated Surface on the Electrochemical Properties of Spinel LiMn2O4 Cathodes37
Issue Publication Information37
Strategy for Ultrafast Cathode Reaction in Magnesium-Ion Batteries Using BF4 Anion Based Dual-Salt Electrolyte Systems: A Case Study of FePO437
Lithium Incorporation into TiO2 Photoanode for Performance Enhancement of Dye-Sensitized Solar Cells37
Body-Fluid-Driven Magnesium–Molybdenum Battery for Wound Healing36
Three-Dimensionally Conducting Network in Graphene-Based Composite Fibers toward Enhanced Electrochemical and Toughness Performance in Fibrous Supercapacitors36
Confronting the Issues Associated with the Practical Implementation of Zinc Blende-type SiC Anodes for Efficient and Reversible Storage of Lithium Ions36
Cell-Format-Dependent Mechanical Damage in Silicon Anodes36
Bimetallic Face-Centered Cubic Pd–Ag Nano-dendritic Alloys Catalysts Boost Ethanol Electrooxidation36
Geometrical Engineering of Spinel Oxide Solid Solution to Enhance the Oxygen Evolution Reaction36
Effect of MXene Addition on the Thermoelectric and Mechanical Properties of Skutterudite CoSb336
Continuous and Scalable Manufacture of Coal-Derived Hierarchical Porous Carbon Dominated with Mesopores for High Rate-Performance Supercapacitors36
Highly Conductive Poly(ethylene oxide)-Based Composite Polymer Electrolyte for Sodium Battery Applications36
Surfactant-Free Synthesis of the Full Inorganic Perovskite CsPbBr3: Evolution and Phase Stability of CsPbBr3 vs CsPb2Br5 and Their Photocatalytic Properties36
Exploring the Temperature-Dependent Microelectrical Characteristics of Organic-Silicon Heterojunctions in the Absence of Luminance36
Acetal- and Aldehyde-Substituted Thiophene-Benzodithiophene Copolymers for Organic Solar Cells36
Dual Bilayer for Improving Contact Quality and Passivation Enables Efficient Organic/Planar-Si Hybrid Solar Cells with a Champion VOC of over 656 mV36
Synergistic Use of a Solid Solution and a Cocatalyst on CoxCd1–xS/NiyFe1–y-LDH for Efficient and Stable Photoelectrochemical Per36
Analysis of the Heavy Alkali Element Postdeposition Treatment: Which Factors Determine the Electronic Structure and Transport Properties of the Heterojunction in CIGS Thin Film Solar Cells35
Formation of 1-D/3-D Fused Perovskite for Efficient and Moisture Stable Solar Cells35
Facile Synthesis of Necessary Amorphous Structure FePO4 Nanospheres as Superior Sodium-Ion Battery Cathodes35
Highly Active Nanostructured NiCoMo-Based Catalyst for Oxygen Evolution in Anion-Exchange Membrane Water Electrolysis35
Leverage between Spinodal Fluctuations and Athermal Transformation in Dilute PbTe Alloying GeTe Thermoelectrics35
NiCo Alloy Nanoparticles Anchored on Carbon Nanotube-Decorated Carbon Nanorods as a Durable and Efficient Oxygen Electrocatalyst for Zinc-Air Flow Batteries35
Construction of MoO2 Ultra-uniformly Coated FeS2 with Tailored Interfacial Traits toward Improved Energy Storage35
Tailoring the Surface of Metal Halide Perovskites to Enable the Atomic Layer Deposition of Metal Oxide Contacts35
Hydrogen Stability and Bonding in SiNx and Al2O3 Dielectric Stacks on Poly-Si/SiOx Passivating Contacts35
First-Principles Investigation of Graphenylene as a Long-Life Cathode Material in Aluminum Ion Batteries35
Morphology–Ionic Conductivity Relationship in Polymer–Titania Hybrid Electrolytes for Lithium-Ion Batteries35
One-Step Vapor Transport Deposition for Tuning the Photovoltaic Performance of SnSxSe1–x Solar Cells: Analysis of the Improved Voc and J35
Improving Silicon Photocathode Performance for Water Reduction through Dual Interface Engineering and Integrating ReS2 Photocatalyst35
Synthesis and Electrochemical Properties of Octahedral Sb2O3-rGO as Anode Materials for Lithium-Ion Batteries35
Double-Activator Modulation of Ultrahigh Surface Areas on Doped Carbon Catalysts Boosts the Primary Zn–Air Battery Performance35
N, S-Codoped Porous Carbon with Densely Edge Structure for Oxygen Reduction Reaction and Zinc-Air Battery35
Unraveling the Role of Composite Li3PO4/ZrO2 Coatings Prepared by Dry Milling on High Voltage Spinel Cathodes for Lithium-Ion Batteries: Insights into Lattice Strain, 35
Crack Healing Mechanism by Application of Stack Pressure to the Carbon-Based Composite Anode of an All-Solid-State Battery35
Freestanding Trilayer Hybrid Solid Electrolyte with Electrospun Interconnected Al-LLZO Nanofibers for Solid-State Lithium-Metal Batteries35
I/Pb Ratio Control in the Solid Perovskite Films toward Efficient and Stable Two-Dimensional Perovskite Solar Cells34
Zr and Ir Codoped Perovskite Nanosheets for Efficient and Stable Oxygen Evolution34
Unraveling the Role of Liquid Metal Catalysts in Electrochemical Growth of Solar Si from SiO2 in CaCl2-Based Molten Salt: Enhancement of Crystallization, Purity, and Photorespons34
Structural Templating of an Organic Solar Cell Absorber by Ellagic Acid To Tune Its Aggregation, Molecular Orientation, and Optical Properties34
Present Status and Future Perspective of Antimony Chalcogenide (Sb2X3) Photovoltaics34
Nitrogen and Oxygen Codoped Hierarchically Porous Carbon Derived from Tannic Acid and Reed Straw for High-Performance Supercapacitors34
Layer-Structured Composite Solid-State Electrolyte with a Li1.3Al0.3Ti1.7(PO4)3-Coated Separator for High-Voltage Lithium Metal Batteries by In S34
Synergistic Effect over CeSnOx Catalyst for the Selective Catalytic Oxidation of NH334
Nanoflake-Assembled Hierarchical Na3V2(PO4)3@C Microspheres for Ultrafast and Highly Durable Sodium Storage34
Impact of Lu-Substitution in Yb14–xLuxZnSb11: Thermoelectric Properties and Oxidation Studies34
Synergistic Effect of Pyridine Salt Additives for Efficient and Stable Inverted Wide-Band Gap Perovskite Solar Cells34
Defective TiO2-Supported Dual-Schottky Heterostructure Boosts Fast Reaction Kinetics for High Performance Lithium-Ion Storage34
Rechargeable Alkaline Zinc/Copper Oxide Batteries34
Enhanced Charge Separation and Short-Circuit Current by Doping with Chlorophyll in Cascaded Ternary Solar Cells34
Porous Hollow Carbon Alkali-Activated Nanoonions As a Conductive Additive for High-Rate Lithium Primary Batteries34
A Unique Approach for the Development of Hybrid Membranes by Incorporating Functionalized Nanosilica into Crosslinked sPVA/TEOS for Fuel Cell Applications34
Strain Engineering of Face-Centered Cubic Pd–Pb Nanosheets Boosts Electrocatalytic Ethanol Oxidation34
Issue Publication Information34
Quantification of Chlorine Gas Generation in Mixed-Acid Vanadium Redox Flow Batteries34
Role of Monovalent Cations in the Dielectric Relaxation Processes in Hybrid Metal Halide Perovskite Solar cells34
Flexible and Self-Healable Supercapacitor with High Capacitance Restoration34
Building a Rechargeable Voltaic Battery via Reversible Oxide Anion Insertion in Copper Electrodes34
Engineering Cu2O Nanowire Surfaces for Photoelectrochemical Hydrogen Evolution Reaction34
Synergistic Effects of FeCo Bimetallic Single-Atom Catalysts: Accelerating the Redox Conversion of Polysulfides and Inhibiting the Growth of Lithium Dendrites in Lithium–Sulfur Batteries34
Active Material Interfacial Chemistry and Its Impact on Composite Magnetite Electrodes33
BaZr(Ce,Y)O3-Pr-Doped CeO2 Double Columnar for the Cathodic Functional Layer of Ni–Fe Metal-Supported Protonic Ceramic Fuel Cells33
Phosphate-Modified NiCo2O4@NiCoS Heterointerface Boosting Electrochemical Performance for Supercapacitors33
Issue Publication Information33
Photoinduced Mitigation of Solid Oxide Electrolysis Cell Degradation: Light Healing Effect on Oxygen Vacancies33
Assessing the Performance of Transition Metals (M = Hf, Ti, and Zr) Decorated Silicon Carbide Nanotubes (M@SiCNTs) for Hydrogen Storage Applications: Insights from Theoretical Calculations33
Tuning the Mechanoelectrical Transduction Performance of Multifunctional Polymer Electrolyte Membranes via Variation of Precursor Molecular Weight33
Comprehensive Insights into Synthesis, Structural Features, and Thermoelectric Properties of High-Performance Inorganic Chalcogenide Nanomaterials for Conversion of Waste Heat to Electricity33
Directing Mn0.2Cd0.8S/Co3O4 np Junctions for Highly Efficient Visible Light Hydrogen Production33
Mg3V4(PO4)6: A Potential Cathode Material with High Stability for Aqueous Zinc-Ion Batteries33
Accelerated Discovery of Perovskite-Inspired Materials through Robotized Screening Including Solar Cell Characterization33
Application of ZrO2-Based Hierarchical Nanofibers as a Promoter in Ni Catalyzed Methane Dry Re-Forming33
3D Printing of Thylakoid-PEDOT:PSS Composite Electrode for Bio-Photoelectrochemical Cells33
A High Temperature Harvestorer Based on a Photovoltaic Cell and an Oxygen Ion Battery33
Composite Anode for PEM Water Electrolyzers: Lowering Iridium Loadings and Reducing Material Costs with a Conductive Additive33
Tailoring Electrochemical Redox Properties of Trioxotriangulene Organic Cathodes by a Heteroatom-Doped Strategy33
Enhanced Thermoelectric Performance of ZrCoSb Half-Heusler Compounds by Sn–Bi Codoping33
Isomeric Nonfullerene Acceptors: Planar Conformation Leading to a Higher Efficiency33
Enhancing Aqueous Zinc-Ion Battery Performance through Structural Modification of Hydrated Vanadate with Lanthanum33
Influence of Cation Vacancies on Li Conductivity of La1/2Li1/2–2xSrxTiO3 Perovskites (0 < x ≤ 0.25): The Role of Nominal and Effecti33
Excellent Thermoelectric Performance of the Metal Sulfide CuTaS332
Hierarchical Waterweed-like Photoanodes for Sustainable Photoelectrochemical Hydrogen Production32
Enhanced Electrochemical Performance of MnMoO4/C Nanoplates in Advanced Battery-Supercapacitor Hybrid Devices32
Architecture of ZnFe2O4@V2CTx MXene Hybrid Anodes via In Situ Chemical Co-precipitation for Optimized Lithium-Ion Battery32
Advance in Electrolyte for Stable Zinc Anodes in Mild Aqueous Batteries32
MXene-Carbon Fiber Composite as Anode Protector for Zn-Ion Batteries for Dendrite Suppression32
Synthesis and Characterization of Multilayered CrAlN/Al2O3 Tandem Coating Using HiPIMS for Solar Selective Applications at High Temperature32
Vertical Compositional Heterogeneity Induces Instability in All-Inorganic CsPbIBr2 Perovskites32
Issue Editorial Masthead32
0.1914050579071