Polymer-Plastics Technology and Materials

Papers
(The TQCC of Polymer-Plastics Technology and Materials is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)
ArticleCitations
Polymeric materials in single photon emission: a futuristic review53
Creation of synergistic effect among raw materials in biodegradable films with novel, designed ZnO particles49
Wrapped quantum Dot/PBDT-TIPS-DTNT-DT nanostructures in high-level perovskite photovoltaics42
Preparation and Mechanical Properties of Polyurethane-Based Negative Poisson’s Ratio Composites for Sports Protection Applications40
The Simultaneous Effect of HA and rGO on the Physical and Mechanical Behavior of TPU Foam Composites Fabricated via Solvent Casting Particulate Leaching40
A review on wire mesh reinforced polymer composite37
Enhanced Mechanical and Thermal Properties in Epoxy-Based Glass Fabric Composites via Nano Silica Integration36
Synergetic Effect of TiO 2 Toward Mechanically and Thermally Stable Hybrid Epoxy Nanocomposites: A Review34
A Novel Approach for Synthesis of Polyaniline with Chiroptical Group at the Terminal32
Tailoring polymer composites for critical thermal applications: a review on fibers, additives, coatings, aerogels, test methodologies31
The Influence of Diol Types on the Properties of Diglycolic Acid-Based Polyester30
Enhanced Properties of Aramid/Salinized MWCNT Composites Through Surface Treatment: A Combined Chemical and Microscopic Approach30
Comprehensive Performance Evaluation of DLP 3D Printing Composite Resin Based on Different Proportions of UDMA/DMSO/TMO System28
Compatibilization Strategies for PLA/PCL Blends: Tuning Thermal, Mechanical, and Biodegradation Properties via Functionalized PCL Derivatives27
Tribological and thermomechanical evaluation of polypropylene nanocomposites containing different dimensional structures of carbon and ceramic nanoparticles27
Fabrication of 3D printed hydroxyapatite/polymeric bone scaffold26
Investigation of the electrochemical behaviors of fibers containing new pyrazolo[5,1-c][1,2,4]triazine derivatives26
Developing and characterizing a flexible piezoelectric nanogenerator based on PVA/ZnO-Fe using the electrospinning method24
Azobenzene-Based Main-Chain Liquid Crystalline Polymers Bearing Periodically Installed Alkyl, PEG, or Fluoroalkyl Segments and Photoisomerization Studies23
Extremophiles as a “green source” of new exopolysaccharides with ecological importance and multifunctional applications21
Nanofiller Hybridization for Enhanced UV Absorption and Thermal Stability in Electrospun PAN Composites: Morphological and Structural Insights21
Influence of compatibility in the EVA/starch/organoclay biodegradable nanocomposite on thermal properties and flame self-extinguishing behavior20
Study of PDMS-based flexible conductive elastomeric composite filled with rGO-CaCO3 nanocomposite19
Homogeneity study of fluoropolymer films modified by atmospheric pressure nitrogen plasma discharges19
Effect of Paraffin Oil Content on Physicochemical Properties of Emulsified Films Based on Soluble Starch/Sodium Alginate Mixture19
Effect of silane treatment on eggshell powder incorporated in poly (L-lactic acid) composite membrane18
Tailoring the Properties of Polyurethane Composites: A Comprehensive Review17
Comparative Insights into Polymers for Solid Dispersions: Mechanisms, Sustainability, Regulatory and Clinical Perspectives17
A Comprehensive Review on the Characterization of Nanomaterials for the Suppression of Electromagnetic Interference Across Diverse Frequency bands17
Porous chitosan membranes by solvent evaporation technique: evaluation of the biopolymer/acetone ratio and potentiality for the membrane distillation process17
Sol-gel for delivery of molecules, its method of preparation and recent applications in medicine16
PEO-based polymer blend electrolyte for composite structural battery16
Dielectric and Ferroelectric Analysis of the PVDF/PMMA Blend with xGnP for Improved Storage Efficiency16
Synthesis and characterization of nanocomposites based on polyimide bearing benzimidazole side groups filled with titania nanoparticles15
Recent advancements and applications in thermally conductive polymer nanocomposites15
3D printed dental protheses using TPO-initiated photopolymerization. Effect of the photoinitiator concentration and the use of a UV-blocker15
Cutting-edge Shape Memory Polymer/Fullerene Nanocomposite: Design and Contemporary Status15
Characterization of MMT and OMMT Nanofillers Effect on the Optical, Dielectric, Electrical, and Electrochemical Properties of PEO/PMMA/P(VDF-HFP)/LiTFSI Solid Polymer Electrolytes15
Preparation and characterization of dense membrane based metal organic networks (MOF- 5) for separation :aromatic-aliphatic mixtures15
Preparation of Polyindole-MnO2/Reduced Graphene Oxide-based Ternary Composite System for Supercapacitive Application15
Efficient synthesis and photocatalytic activity of newly synthesized core-shell nanocomposites14
Characterization of Nanofibrous Acrylonitrile Membranes Functionalized with Immobilized Laccases via Ugi Technique14
Nanocomposites of Three-Dimensional Graphene Nanofoams with Polymers—Fundamentals and Progressions14
Graphene Quantum Dots Nanocomposite Membranes—State-of-the-art and Next-Generation Potential13
Recent Advances in 3D-Printed Biodegradable Materials: Applications in Tissue Engineering and Environmental Remediation13
Synthesis, Modification, and Applications of Poly(vinyl chloride) (PVC)13
Symphony of Strength-Polyurethane-Infused MXene/Graphene Composites for Self-Healing Smart Material13
Effect of Oligoricinoleic Acid on Degradation of Polylactic Acid13
Design and application research of a flexible array plantar sensor based on P(VDF-TrFE)/SnO 2 NP S /GR for Parkinson’s disease dia12
Sustainable Upcycling of Styrofoam Waste into Sulfonated Polystyrene/Polyaniline/MnO 2 Composite as a Base Electrode Material for Supercapacitor Appl12
Exploring the Frontiers and Hurdles of Phosphorus-Based Intumescent Flame-Retardant Polyurethane: A Comprehensive Journey12
Synthesis and characterization of new nanocomposites-based polyimide/modified montmorillonite and their applications in gas separation12
Structural design and development of multilayered polymeric nanofibrous membrane for multifaceted air filtration/purification applications12
Critical Review: Graphene Production Methods and its Polymer Nanocomposites12
A New Magnetic Molecularly Imprinted Polymer Based on β-Cyclodextrin for Selective and Effective Removal of Antibiotic Tetracycline from Wastewater12
Correction11
Poyaniline based electromagnetic interference shielding materials11
A Comprehensive Review of Chitosan-Composite Materials and Their Applications11
Light-Activated Nanofibers: Advances in Photo-Responsive Electrospun Polymer Technologies11
Fullerene grafting in polymeric nanocomposite—a promising strategy11
Natural fiber reinforced rPET/polyester composites: a review on development, mechanical performance, and sustainable management11
Emerging Advancements in Hybrid Molybdenum Disulfide Polymeric Nanoarchitectures and Multifunctional Applications11
Effect of Fillers on the Performance of Fibre Reinforced Polymer Hybrid Composites: A Comprehensive Review11
Study of the side group effect on silane coupling agents, used in titanium dioxide. Case study: polylactic acid composites11
A Comprehensive Review on Polycaprolactone: A Promising Polymer for Enhancing Drug Bioavailability11
Surface-crosslinking in the presence of nanoclay and characteristics of the itaconic acid-based superabsorbent polymer composites11
Stimuli-Responsive Hydrogel Platforms for Cancer Immunotherapy: Advances in Design, Mechanisms, and Clinical Translation11
Semi-Solid Extrusion Technique for the Processing of Gelatin-Based Composites with Improved Mechanical Performance11
Reinforcements of cationic polyvinyl alcohol with low dosage for secondary fibre10
Correction10
Development and characterization of nanoceramic reinforced polyimide-based nanocomposites for high-temperature energy storage applications: a review10
Preparation of green-stretchable hydrogel based on succinic acid-based monomer ‎with antibacterial properties10
Design and rheological characterization of chitin modified N-vinyl pyrollidone/Acrylamide copolymer based biphasic hydrogels10
Electrospraying and Electrospinning of Deep Eutectic Solvent-Based Emulsions10
The Role of Polyurethane and Its Composites in Additive Manufacturing of Sensors10
Polymer Composite Coatings Enhanced with Superhydrophobic Properties for Flexible Electronics Applications: A Review9
Advance Nanocomposites from Biopolymers and Fillers: Sources, Characterization, and End-Use Applications9
Effect of magnetite and graphene nanoplatelets on mechanical properties and thermal stability of thermoplastic elastomer9
Advances in Additive Manufacturing of Basalt Fiber Composites: A Review of Fiber Orientation, Defect Mitigation, and UHMWPE Hybrid Systems for Lightweight Structures9
Flame Retardant mechanisms of Metal organic Frameworks (MOFs) Polymeric nanoarchitectures9
Recycling Polyethylene Terephthalate as Food Contact Material: A Review of Technologies, Regulations, and Challenges9
Investigation for the Preparation and Performance of an Electrical Response Flexible Actuator8
An overview on synthesis, properties and applications of polycaprolactone copolymers, blends & composites8
Studies on Nitrogen Rich Benzoxazines Containing Schiff Base for Optical, Aggregation Induced Emission and Anti-Microbial Applications8
Opportunities of PEEK-Based Composites for Next-Generation EMI Shielding Applications8
TEOS loading effect on the properties of PVA-modified polysulfone membranes8
Flame Retardancy and Properties of Thermoplastic Vulcanizates from Dibutyl Phosphate-Bound Natural Rubber/Ethylene Vinyl Acetate Blends8
Influence of argon irradiations on modifying the surface properties and optical behavior of polymer composite films7
Advances in Additive Manufacturing for Skin Regeneration Through Materials, Techniques and Biomedical Applications7
Optimizing Photovoltaic Performance of DSSCs Through SnO₂-Loaded Polyindole Nanocomposites7
Optimizing Electrochemical Performance of Biopolymer Electrolytes: Enhancing Ion Transport in CS: MC-Based Polymer Electrolytes Through Glycerol Plasticization and TiO 27
Production, characterization and water filtration performance of polyvinylidene fluoride-based membranes performance of polyvinylidene fluoride membranes7
Fabrication and mechanical characterization of different stacking sequences of glass/flax embedded fibers into hybrid polymer composites7
Development of Conductive Polymer PANI-Anchored Neodymium -Doped Ferrite (BNF/PANI) Composite Electrodes for High-Performance Supercapacitors7
A Review on Synthesis, Structure, Properties, and Film Capacitor Applications of Poly(4-methyl-1-pentene) and Derived Materials7
Enhanced performance of hybrid piezo/triboelectric using BaTiO 3 /polymer composite film modified with rGO7
Investigating the morphological, mechanical, barrier, and antibacterial properties of the polycaprolactone nanocomposite films reinforced with hybrid zinc oxide/polyhedral oligomeric silsesquioxane na7
Characterization of the mechanical and tribological properties of TiO2/polyimide nanocomposites produced using spark plasma sintering method7
Do Carboxymethyl Cellulose and Pal-KTTKS Make Bacterial Cellulose a Superior Wound Dressing or Skin Scaffold?7
Preparation of bio-based heat storage microcapsules of cellulose acetate butyrate/ polymethylmethacrylate composite by micro-suspension polymerization7
“Synergistic Enhancement of Thermomechanical and Chemical Properties in Carbon Fiber-Reinforced Composites via Modified Polyester–Epoxy Hybrid Matrix”7
Preparation and Characterization of Magnetic Polymeric Micro- and Nanocomposites for Industrial Applications7
Effect of hydroxyl terminated polybutene elasticizing additive on the wear of paper friction material7
Electrospun nanofiber for drug delivery applications: a review7
Borophene polymeric nanoarchitecture and applications: a review6
Strategies to Design Multifunctional Tear-Proof and Permeation Resistant Food Packaging Films: An Overview6
Composites/Nanocomposites of natural rubber with carbonaceous micro-/nano-reinforcements—research trends and scientific distinctions6
Synergistic hybrid effect of nano fillers on the structure and properties of asphalt composites6
Water-mediated chelation dynamics of dicarboxylic acid functionalized TiO 2 nanoparticles for β-nucleation enhancement in isotactic polypropylene composites6
Vanillin derived partially bio-based benzoxazine resins for hydrophobic coating and anticorrosion applications: Studies on syntheses and thermal behavior6
Synthesis of nano magnetic chitosan modified with acrylamide schiff’s base for simultaneous removal of Cu(II) and Co(II) from waste water samples6
Facile, efficient and controllable polysulfide sealing over physical mixture of different crystalline forms of MnO 26
Observing the Antagonistic Effect in the Graphene-Polyaniline Hybridization and Its Correlation with CO 2 Sensing Behaviour6
Recent Advances in the Antimicrobial and Antioxidant Capabilities of PLA Based Active Food Packaging6
Nanosulfur Nanoreinforcements—Unlocking the Promises of Polymers and Polymer/Nanocarbon Nanocomposites6
Biocompatible Graphene Polymer Composites: New Frontiers in Biomedical and Environmental Applications6
Development, characterization, and evaluation of polymer-based hydrogel membrane patches for intestinal delivery of gliclazide6
Development of exfoliated mica waste/natural rubber composites by latex stage mixing6
Amino functionalized bimetallic NiCo MOF integrated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene matrix for proton exchange membrane fuel cell6
Melt processing of graphene-coated polylactide granules for producing biodegradable nanocomposite with higher mechanical strength6
Metal organic frameworks (MOFs)@conducting polymeric nanoarchitectures for electrochemical energy storage applications6
DMARDS incorporated injectable hydrogels in cartilage tissue regeneration: a review6
Investigation of the Mechanical Properties of Epoxy Matrix Composites Reinforced with Stellite 21 at Different Sizes6
Comparative Study of Antibacterial Properties of Electrospun Microfibers of Cinnamaldehyde Embedded in and Covalently Bonded to Poly (Methyl Methacrylate)6
Amphiphilic Copolymers—A Turning Point on the Way to Functional Nanocomposites and Technologies6
State-of-the-Art of Fullerene-Based Nanocomposite Nanofibers—Enterprise and Technological Amenabilities6
Functional Biofilms Based on CMC for Biodegradable Applications: Effect of GMA, AAM, and ZnO Nanoparticles6
Hydrogels: multifunctional biomaterials with versatile applications6
Flame retardant mechanisms of Montmorillonites, layered double hydroxides and molybdenum disulfide polymeric nanoarchitectures for safety in extreme environments6
0.26852488517761