OOIR: Observatory of International Research

Papers

(The TQCC of Batteries & Supercaps is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-08-01 to 2026-08-01.)

Article	Citations
Cobalt–Nickel Exchange in Exfoliated Battery Layered Cathode Sheets with Application to Recycling	67
Lithium Fluoride Embedded Prelithiated Graphite Interface Layer Enables Stable All‐solid‐state Lithium Ion Batteries	63
Cover Picture: Green Electrolytes for Aqueous Ion Batteries: Towards High‐Energy and Low‐Temperature Applications (Batteries & Supercaps 2/2025)	62
Cover Feature: Layered Titanium Sulfide Cathode for All‐Solid‐State Magnesium Batteries (Batteries & Supercaps 8/2023)	62
	60
Compatibility of Molybdenum Disulfide and Magnesium Fluorinated Alkoxyaluminate Electrolytes in Rechargeable Mg Batteries	56
Cover Feature: Sodium‐Dictated Free‐Standing Lignin‐Carbon Electrode towards Ultrahigh Capacitance (Batteries & Supercaps 9/2023)	53
NiCo₂O₄/P,N‐Doped Carbon with Engineered Interface to Improve the Rechargeability of Zn‐Air Batteries at High Energy Demands	50
Hybrid High‐Voltage LiNi_0.5Mn_1.5O₄/Graphite Cathodes Enabling Rechargeable Batteries with Simultaneous Anion‐ and Cation Storage	48
Natural Aloe vera Coating Enables Long‐Life Zinc Anodes for High‐Performance Aqueous Batteries	48
High‐Performance Supercapacitor Electrodes Based on Porosity‐Controllable Carbon Paper by Centrifugal Spinning	47
Influences on Reliable Capacity Measurements of Hard Carbon in Highly Loaded Electrodes	46
Self‐Supporting Solid Electrolyte Based on Supramolecular Interaction for Stable Li Metal Batteries	46
Nanostructured Ionic Liquid Containing Block Copolymer Electrolytes for Solid‐State Supercapacitors	43
Accelerated Workflow for Antiperovskite‐based Solid State Electrolytes	42
Modeling Oxygen Loss and Phase Transformation in Ni‐Rich Cathode Materials: Impact of Electrode Microstructure	38
Impact of Graphene Oxide Lateral Size on the Long‐Term Stability of LiNi _0.5 Mn _1.5 O	37
Novel Li‐Ion Battery Diagnostics; Detection of Redox Peaks Utilising Plasmonic Fibre Optic Sensors and Evaluation of Interference on Cell Function	37
Structure–Performance Relationships in Anthraquinone‐Disulfonate Coordination Polymers for Li‐Ion and Na‐Ion Battery Cathodes	36
In Situ Growth of Highly Porous Zeolitic‐Imidazolate Frameworks‐8 on Copolymer Derived Carbon for High‐Performance Supercapacitor	35
Scalable and Sustainable Cathode Regeneration from Blended Spent Batteries into Stable Lithium‐Rich Manganese‐Based Cathodes	34
Anion‐Derived Solid Electrolyte Interphase Enabled by Diluent Modulated Dimethyl Carbonate‐Based Localized High Concentration Electrolytes for Lithium Metal Batteries	34
Corrigendum: A Review of Polymer‐based Solid‐State Electrolytes for Lithium‐Metal Batteries: Structure, Kinetic, Interface Stability, and Application	34
Fiber‐Particle Composite Binder Enabled Feasibly Dry‐Processed Ultrahigh‐Nickel Cathode Film for All‐Solid‐State Lithium Batteries	34
Configuration‐Engineered Zn ²⁺ Solvation for Directed Interfacial Chemistry in Aqueous Zinc Batteries	33

Pre‐intercalation Strategies to Layered Vanadium‐based Electrode Materials for Aqueous Zinc Batteries	33
Tracking Zn Particle Movement in Zn–MnO ₂ Batteries and Incorporating Granular Flow Into a Computational Battery Model	33
Recent Advances in Electrolytes for Silicon‐Based Lithium‐Ion Batteries: From Electrolyte Components to Formulation Design	33
Regulating Zn ²⁺ Diffusion Dynamics in Aqueous Zn‐Ion Batteries by Tweaking Coordination Sites in Organic–Inorganic Hybrid Cathode	33
Density Functional Theory Study on ZIF‐8 MOF Anchors for Mitigating Polysulfide Shuttling in Calcium–Sulfur Batteries	32
High‐Entropy Engineering Regulates Na‐Ion Transport and Phase Evolution in O3‐Type Layered Oxide Cathode	32
Research Progress on Fiber‐Optic Operando Monitoring in Lithium‐Ion Batteries	31
LiBF₄ Induced Unique Surface Modification Enables Improved Electrochemical Performance of LiNi_0.8Co_0.1Mn_0.1O₂ Cathode	31
MXene‐Modulated Garnet Electrolyte Interface for Uniform Li Flux and Dendrite‐Free Solid‐State Lithium Metal Batteries	31
An Automatized Rebalancing System to Address Faradaic Imbalance and Prolong Cycle Life in Alkaline Ferrocyanide – Anthraquinone Redox Flow Batteries	30
Porous Layered F–N‐Doped Carbon Nanofibers for Capacity Enhancement in Flexible Zinc‐Ion Batteries Cathodes	30
Cover Feature: Li Decorated Graphdiyne Nanosheets: A Theoretical Study for an Electrode Material for Nonaqueous Lithium Batteries (Batteries & Supercaps 12/2024)	29
A Carboxyl‐Rich 3D Cross‐Linked Polymer Binder for High‐Performance Silicon Anodes in Lithium‐Ion Batteries	29
High‐Voltage Off‐Stoichiometric Vanadium‐Based Pyrophosphate Na_6.51V_3.16(P₂O₇)₄ for Rechargeable Sodium‐Ion Batteries	28
Cover Feature: Free‐Standing Pearl‐Chains‐like MoO₂ Hierarchical Nanowires with Enhanced Pseudocapacitive Energy Storage (Batteries & Supercaps 9/2022)	28
Regulating and Unraveling Electrochemical Behavior of Hierarchically‐Densifying Mesoporous Apocynum Carbon for High performance Supercapacitor	28
Front Cover: Nanostructuring Strategies for Silicon‐based Anodes in Lithium‐ion Batteries: Tuning Areal Silicon Loading, SEI Formation/Irreversible Capacity Loss, Rate Capability Retention and Electro	27
A Novel Approach for Development of Stable Quasi‐Solid Lithium‐O₂ Batteries: Assembly and Performances of Double Layer Gel Polymer Electrolytes	27
Cover Picture: Non‐Thermal Plasma Assisted Fabrication of Ultrathin NiCoO_x Nanosheets for High‐Performance Supercapacitor (Batteries & Supercaps 11/2022)	27
Per and Polyfluoroalkyl Substances‐Free Poly(ionic liquid) Reinforced with Cellulose Nanofibrils as Sustainable Electrolyte for High‐Voltage Solid‐State Lithium Batteries	27
The Impact of Crystal Structure on the Electrochemical Performance of Silicon–Carbon Anodes	27
In Situ Polymerized Polyaniline Coating on Na ₅ V ₁₂ O ₃₂	27
Improved Interface Stability and Zinc‐Ions Distribution Achieved by Functional Protective Layer Containing Abundant Oxygen Sites and Regular Channels for Long‐Life Zinc‐Metal Anodes	26
Building Bulk and Interface Dual Fast Li⁺ Conducting Pathway in Composite Solid Polymer Electrolyte Membrane for All–Solid–State Lithium–Metal Batteries	26
Lithium‐Free Redox Flow Batteries: Challenges and Future Prospective for Safe and Efficient Energy Storage	26
In Situ (Scanning) Transmission Electron Microscopy Investigation of Phase Transformation Mechanism in LiNiO ₂ Cathode During Cycling	25
Effect of the Intrinsic Structure of Natural Microcrystalline Graphite on Lithium Storage Performance	25
Rational Design of Three‐Dimensional Self‐Supporting Structure for Advanced Lithium Metal Anode	24
Improved Electrochemical Performance of LiMn_0.6Fe_0.4PO₄ via Chitosan‐Derived Nitrogen‐Doped Carbon Coating	24
Tetraethylammonium Perfluorobutanesulfonate as an Alternative Salt for Electric Double Layer Capacitors	24
Characterizing the Impact of Oligomerization on Redox Flow Cell Performance	24
Graphene‐Encapsulated Nitrogen‐doped Carbon@Bi Enables Rapid, Ultrahigh and Durable Sodium Storage	24
MOF Derived Ni‐Cu Double Hydroxide Based Self‐Powered Flexible Asymmetric Supercapacitor Using Onion Scale as an Effective Bio‐Piezoelectric Separator	24
Pressure Effect on Mechanical and Electrochemical Properties of Lithium Cobalt Oxide Powder Materials	23
Design of L‐asparaginasespacer Molecules Intercalated 2D Ti₂C with Increased Interlayer Spacing towards High‐performance Sodium‐ions Storage	23
Thermally Controlled Synthesis of Cr₂(NCN)₃/CrN Heterostructured Composite Anodes for High‐Performance Li‐Ion Batteries	23
Synergistic Heterointerface Coupling Enables Long‐Life Sn‐Based Anodes for Na‐Ion Batteries	23
Investigation of Electrolyte Salts in Non‐Flammable Triethyl Phosphate for Sodium‐Ion Batteries	23
Corrosion Study of Current Collectors for Magnesium Batteries	23
Molecular Mechanism of Ionic Conductivity Enhancement by Heterogeneous Interface in Composite Hydrogel Electrolytes	23
Investigation of Polyacrylonitrile‐Derived Multiple Carbon Shell Composites for Silicon‐Based Anodes in Lithium‐Ion Batteries	22
The ARTISTIC Battery Manufacturing Digitalization Initiative: From Fundamental Research to Industrialization	22
Triallyl Isocyanurate Enabling Robust Interfacial Barrier with Exceptional High‐Temperature Resilience for Ni _0.9 Co _0.06	22
Electrolyte Developments for All‐Solid‐State Lithium Batteries: Classifications, Recent Advances and Synthesis Methods	22
Ultrahigh‐Ni Cathode with Superior Structure Stability Enabled by a Covalent Bonding Strategy	21
Interpretable Machine Learning‐Driven Discovery of Sodium‐Ion Battery Cathode Materials With First‐Principles Validation	21
Interphase design of LiNi_0.6Mn_0.2Co_0.2O₂ as positive active material for lithium ion batteries via Al₂O₃ coatings using magnetr	21
Data‐Driven State of Health for Lithium‐Ion Batteries: Feature Engineering, Estimation Approaches, and Future Directions	21
Triazine‐Anion‐Based Fluorine‐Free Ionic Liquids and Lithium Battery Electrolytes With Flexible Cations	21
Fracture Testing of Lithium‐Ion Battery Cathode Secondary Particles in‐situ inside the Scanning Electron Microscope	20

Molten‐Salt‐Assisted Conversion of Waste Soybean Cake Into High‐Performance N and O Co‐Doped Porous Carbon for Lithium‐Ion Battery Anodes	20
	20
Modification of Cathode Surface for Sulfide Electrolyte‐Based All‐Solid‐State Batteries Using Sulfurized LiNbO ₃ Coating	20
Cyano‐Substituted Phenazine Derivative as a High‐Performance Organic Anode for Aqueous Proton Batteries	20
Pore Reconstruction of Fermented Biomass‐Derived Hard Carbon for High‐Plateau‐Capacity Sodium Storage	20
Enabling Long‐term Cycling Stability of Na ₃ V ₂ (PO ₄	20
Reducing Residual Alkali by Moderated Acetic Acid Treatment for Stable Sodium‐Ion Layered Oxides	20
Nickel‐Manganese‐Based Layered Oxide for Sodium Ion Battery Cathode Materials	19
	19
Dynamic Adaptive Porous Cu Current Collector for Low N/P Ratio Li Metal Batteries	19
Construction of a Magnetic Interphase for Stable Cycling of Lithium Metal Batteries	19
Layered Titanium Sulfide Cathode for All‐Solid‐State Magnesium Batteries	19
Cover Picture: Self‐Closing of Cracks Generated in Microstructure‐Controlled 400 μm‐Thick Composite Cathodes for All‐Solid‐State Batteries: Observed by InSitu Scanning Electron Microscop	19
Supercapacitor Degradation: Understanding Mechanisms of Cycling‐Induced Deterioration and Failure of a Pseudocapacitor	19
Electrochemical Testing and Benchmarking of Compositionally Complex Lithium Argyrodite Electrolytes for All‐Solid‐State Battery Application	19
Cover Feature: Enabling the Use of Lithium Bis(trifluoromethanesulfonyl)imide as Electrolyte Salt for Li‐Ion Batteries Based on Silicon Anodes and Li(Ni_0.4Co_0.4Mn_0.2)O	19
A Review of Polymer‐based Solid‐State Electrolytes for Lithium‐Metal Batteries: Structure, Kinetic, Interface Stability, and Application	19
The Extent of Catholyte Gelation as a Critical Safety Factor in NMC‐Based Solid‐State Battery Design	19
A Hydroxylated Tetracationic Viologen based on Dimethylaminoethanol as a Negolyte for Aqueous Flow Batteries	19
	18
Multidopant Induced Entropy Effect on TiS ₂ /TiSe ₂ ‐Based Layered Anode and Formation of Electrod	18
Toward the Formation of the Solid Electrolyte Interphase on Alkaline Metal Anodes: Ab Initio Simulations**	18
Tailoring Pure Inorganic Electrolyte for Aqueous Sodium‐Ion Batteries Operating at −60 °C	18
Surface Engineering of Binder‐free Anodes of Bi and Cu Compounds with Se and Carbon Nanotubes to Improve Lithium‐ion Batteries	18
Cobalt/MXene‐derived TiO₂ Heterostructure as a Functional Separator Coating to Trap Polysulfide and Accelerate Redox Kinetics for Reliable Lithium‐sulfur Battery	18
Modified Electrolyte with Sodium Alginate to Effectively Protect the Anode of Aqueous Zinc‐Ion Battery	18
Understanding the Capacity Fade in Polyacrylonitrile Binder‐based LiNi _0.5 Mn _1.5 O	18
From Battery Manufacturing to Smart Grids: Towards a Metaverse for the Energy Sciences	18
Acid Etching‐Driven Self‐Assembly of Mn‐Shell Inducing Rock‐Salt Phase for Enhanced Single‐Crystal Ni‐Rich Cathodes	18
Scalable Fabrication of Flexible Supercapacitor Electrodes Using Sustainable Water‐Based Onion‐Like Carbon Inks	18
Electrospinning Polyanionic Materials for High‐Rate Na Storage	18
Influence of Al ₂ (SO ₄ ) ₃ Electrolyte Additiv	17
Increasing Redox Potential of Pyromellitic Diimide by Chemical Modifications: Toward High‐Voltage Organic Positive Electrode for Lithium Battery	17
Green Electrolytes for Aqueous Ion Batteries: Towards High‐Energy and Low‐Temperature Applications	17
Emerging Ultralow‐Temperature Electrolytes for Lithium Batteries Operated Below −30 °C	17
Efficient Analysis of Interdependencies in Electrode Manufacturing Through Joint Application of Design of Experiments and Explainable Machine Learning	17
Preintercalation Induced Transition from Double Layer to Redox Calcium‐Ion Storage in Vanadium Carbide MXene	17
Low‐Temperature and High‐Areal‐Capacity Rechargeable Lithium Batteries enabled by π‐Conjugated Systems	17
Topology‐Optimized Porous Electrode Architectures for Enhanced Performance in Vanadium Redox Flow Batteries in Flow‐Through Cell Designs	17
In‐situ Lithiated SiO₂ as Lithium‐Free Anode for Lithium‐Sulfur Batteries	17
Interface Engineering via Li ₂ C ₄ O ₄ Prelithi	17
Tin–containing Silicon Oxycarbonitride Ceramic Nanocomposites as Stable Anode for Magnesium Ion Batteries	17
Aging Behavior Beyond SOH 80: An Experimental Aging Study on Commercial Lithium–Ion Batteries with Different Cathode Materials: Capacity Loss, Resistance Change and Impedance Modeling	16
Investigation of Degradation Pathways in Fluoroethylene Carbonate Based Electrolytes via Chromatographic Techniques	16
Plasticizer‐Assisted Garnet LLZO Integration in TPU‐Based Solid Composite Electrolytes for High‐Performance Solid‐State Lithium Metal Batteries	16
Analyzing and Improving Conductive Networks in Commercial High‐Energy Ni‐rich Cathodes	16
Research in Electrochromic Supercapacitor – A Focused Review	16
Electro‐Chemo‐Mechanical Failure Mechanisms of Solid‐State Electrolytes	16
Towards a Practical Use of Sulfide Solid Electrolytes in Solid‐State Batteries: Impact of Dry Room Exposure on H₂S Release and Material Properties	16
Investigating the Reduction of Fluoroethylene Carbonate and Vinylene Carbonate in Lithium‐Ion Cells with Silicon‐Graphite Anodes	16
Self‐Extinguishing and Low‐Cost Quasi‐Solid Polymer Electrolyte for Room Temperature Lithium Metal Batteries	15
Imine‐Based Conjugated Polymers as High‐Performance Organic Cathodes for Rechargeable Magnesium Batteries: Insights from Electronic Structure Design	15
New Insights into Self‐Discharge and Heat Generation in Magnesium Batteries	15
Spiro‐OMeTAD as Redox Mediator and Singlet Oxygen Scavenger in Lithium‐Oxygen Batteries	15
Resolving Graphite‐Electrolyte Interphase of Lithium‐Ion Batteries using Air‐Tight Ambient Mass Spectrometry	15
Origin of Performance Improvements in Lithium‐Ion Cells after Fast Formation	15
Boron‐Modified Silicon Carbonitride as a Sulfur Host for Stable Lithium–Sulfur Batteries	15
Elliptical Silicon Nanowire Covered by the SEI in a 2D Chemo‐Mechanical Simulation	15
Cesium Phosphotungstate Salt Nanospheres Coated on a 3D Graphene Framework for Lithium Ion Batteries	15
Electrochemistry Visualization Tool to Support the Electrochemical Analysis of Batteries	15
Discrete Element Method Modeling of an Extrusion Process with Recirculation for Dry Manufacturing of Lithium‐Ion Battery Electrodes	15
Lithium Alloying Strategies for Anode/Solid‐State Electrolyte Interface Engineering in Solid‐State Lithium Metal Batteries	15
Cryolithionite‐Based Pseudocapacitive Electrode for Sustainable Lithium‐ion Capacitors	15
Insight into the Hybrid Zn–Co/Air Batteries Coupling Faradic Redox and Oxygen Catalytic Reactions	15
Nanoengineering of Thin Film V₂O₅ Cathode Interfaces via Atomic Layer Deposition for use with Polymer Gel Ionic Liquid Electrolytes	15
Ionic Liquids as Cathode Additives for High Voltage Lithium Batteries	15
Tailoring Rheological and Functional Properties of Nickel‐Mangan‐Cobalt‐Based Recyclate Cathodes from Direct Recycling of Lithium‐Ion Battery Production Scrap	14
Li Decorated Graphdiyne Nanosheets: A Theoretical Study for an Electrode Material for Nonaqueous Lithium Batteries	14
Assessing Manufacturing‐Performance Correlation On LiMn_0.7Fe_0.3PO₄ Electrodes For Application In Upscaled Li‐Ion Battery Cells	14
Correlating the Sodium Storage Mechanism and Enhancing the Initial Coulombic Efficiency of Biomass‐Derived Hard Carbon in Sodium‐Ion Batteries	14
Oxide Solid Electrolytes in Solid‐State Batteries	14
Amorphous Lithium Borate Coating Enhances the Electrochemical Performance of Lithium Manganese Iron Phosphate Cathodes for Highly Stable Lithium‐Ion Batteries	14
Comparative Investigation of Three Mg Doping Strategies in NMC811 Cathodes for High‐Energy Density Lithium‐Ion Batteries	14
Insights into the Overcharge‐Induced Failure Mechanism of Lithium–Sulfur Batteries	14
Multifunctional Electrolyte Additive Enabling Enhanced High‐Rate Performance With Interfacial Stability for LiMn _0.6 Fe _0.4<	14
Prussian Blue Analogues Derived Bimetallic CoNi@NC as Efficient Oxygen Reduction Reaction Catalyst for Mg‐Air Batteries	14
Sulfurization of Electrode Material: A Promising Window for Supercapacitor Technology	14
Exploring Rochelle Salt Aqueous Solutions for Supercapacitors: Transport, Stability, and Performance	14
Mg‐Doped MnO ₂ Cathode with Tailored Oxygen Vacancies for High‐Rate High‐Capacity Calcium Storage	14
In‐situ Polymerized Single Lithium‐ion Conducting Binder as an Integrated Strategy for High Voltage LNMO Electrodes	14

Unveiling the Importance of Solid−Liquid Interphase for the Development of All Solid‐State Sodium Metal Batteries	14
Supercapacitive Swing Adsorption of Carbon Dioxide: Current Status and Perspectives	14
Intrinsic Zinc in Brass Enables Lithium Anode Dendrite‐Free	13
Regulating Zinc Deposition via Zincophilic 2D‐Cu₂Te as the Current Collector to Suppress Dendrite Formation toward High Performance Aqueous Zinc‐Ion Batteries	13
A Nanostructured Phenazine‐Based Conjugated Microporous Polymer Hybrid Anode Boosts Power and Practicability of Organic‐Manganese Hydronium‐Ion Batteries	13
Thionin as a Bipolar Organic Cathode Material for Aqueous Rechargeable Zinc Batteries	13
The Challenge of Electrolyte Impregnation in the Fabrication and Operation of Li‐ion and Li−S Batteries	13
Sustainable Synthesis of Structurally Robust LiNi _1/3 Mn _1/3 Co _1/3	13
A High‐Energy and High‐Safety Bisolvent‐in‐Salt Semisolid Flow Battery	13
Solution‐Processed Synthesis of Nano‐Sized Argyrodite Solid Electrolytes with Cavitation Effect for High Performance All‐Solid‐State Lithium‐Ion Batteries	13
Smart Electrolytes for Lithium Batteries with Reversible Thermal Protection at High Temperatures	13
Cover Feature: Calibrated Electrochemical Impedance Spectroscopy and Time‐Domain Measurements of a 7 kWh Automotive Lithium‐Ion Battery Module with 396 Cylindrical Cells (Batteries & Supercaps 4/2	13
	13
Unraveling the Influence of Li⁺‐cation and TFSI⁻‐anion in Poly(ionic liquid) Binders for Lithium‐Metal Batteries	13
Nano‐Treated Na ₂ C ₂ O ₄ With Reduced Oxidatio	13
Comparative Study of High Voltage Spinel∥Lithium Titanate Lithium‐ion Batteries in Ethylene Carbonate Free Electrolytes	13
MnO Modified Porous Carbon with Improved Adsorption Capability and Promoted Redox Kinetics in Lithium‐Sulfur Batteries	13
Investigation of Electrolyte Decomposition Byproducts in Gas and Liquid Phases Due to Water Impurities in Large‐Scale Acetonitrile‐Based Supercapacitors	13
Non‐Aqueous Liquid Electrolytes for Li‐O₂ Batteries	13
Efficient Low Temperature Performance of All Solid‐State Zinc‐Air Batteries with MnCo₂O₄/Carbon Fiber Bifunctional Electrocatalyst and Poly(Acrylic Acid) (PAA) Gel Polymer Electr	13
Alloying and Nanotechnology for Sn‐based Anode Materials: Paving the Way to the Future of Lithium‐Ion Batteries	13
Lithium Nitrate as Salt Additive for Solid Electrolyte Interphase Formation in Dual‐Ion Battery	13
Bipolar Organic Cathodes for Stable and Sustainable Na‐Ion and Rechargeable Al Batteries	13
Advanced Molecular Layer Deposition of Si_xZn_yO_z Thin Film Coatings for Improved Electrochemical Performance of NMC811	13
Homogeneous Redox Mediators Applied to Li–S Batteries	13
F Doped δ‐MnO₂ Nanoflowers for High‐Performance Aqueous Zinc‐Ion Batteries	12
Organics‐MXene Composites as Electrode Materials for Energy Storage	12
A π‐Conjugated Porphyrin Complex as Cathode Material Allows Fast and Stable Energy Storage in Calcium Batteries	12
Analysis of Quality‐Relevant Process–Structure Relationships through Tracking and Tracing: A Comprehensive Study on the Calendering Process in Lithium‐Ion Battery Production	12
Path‐Dependent Ageing of Lithium‐ion Batteries and Implications on the Ageing Assessment of Accelerated Ageing Tests	12
Unveiling the Adsorption‐Desorption Mechanism in Phosphorus‐Doped Activated Carbon for Enhanced Double‐Layer Pouch‐Cell Supercapacitors	12
Core‐Shell Structured CoP@C Cubes as a Superior Anode for High‐Rate and Stable Sodium Storage	12
Review on Cathode Materials for Sodium‐ and Potassium‐Ion Batteries: Structural Design with Electrochemical Properties	12
Challenges and Approaches to Designing High‐Energy Density Lithium‐Sulfur Pouch Cells	12
Investigation of an Industrially Scalable Production of Sulfur‐Polyacrylonitrile Based Cathodes	12
Effect of Synthesis Conditions on the Composition, Local Structure and Electrochemical Behavior of (Cr,Fe,Mn,Co,Ni) ₃ O ₄	12
Agar‐Based Interface for Suppressing Parasitic Reactions toward High‐Performance Aqueous Zn‐Ion Batteries	12
Operando Detection of Lithium Plating and Stripping in Fast‐Charging Li‐Ion Cells with a Reference Electrode	12
Unraveling the Effects of Redox‐Active Electrolytes on Carbon Electrodes in Li‐Ion Capacitor	12
Solid‐State NMR Study on the Structure and Dynamics of Graphite Electrodes in Sodium‐Ion Batteries with Solvent Co‐Intercalation	12
Redox‐Active Organic Electrode Materials for Supercapacitors	12
Application of Na₂CO₃ as a Sacrificial Electrode Additive in Na‐ion Batteries to Compensate for the Sodium Deficiency in Na_2/3[Fe_1/2Mn_1/2]O₂	12
Facile Fabrication of Flexible and Porous Single‐Walled Carbon Nanotubes/Polyaniline Composite Films via a Novel Solution Approach for Supercapacitor Applications	12
Highly Effective Electrolytes Toward High‐Performance Aluminum/Seawater Batteries	12
Investigating the Influence of the Effective Ionic Transport on the Electrochemical Performance of Si/C‐Argyrodite Solid‐State Composites	12
Voltage Decay in Li‐Rich Layered Oxide Cathodes: From Multiscale Mechanism Clarification to Integrated Strategies Design	12
Cover Feature: Breaking Down the Barriers between the Digital and the Real: Mixed Reality Applied to Battery Manufacturing R&D and Training (Batteries & Supercaps 7/2024)	12
Coupled TCNQ–Cu ²⁺ Redox Forms Conductive CuTCNQ for High‐Rate Aqueous Copper‐Ion Batteries	12
Benchmarking Mg Electrolytes with Different Metal Plating/Stripping Protocols	11
Interfacial Mo(VI)/Mo(IV) Redox‐Mediated Ultrafast Charge Storage in MXene/Carbon Nanotube Hybrid Electrodes in Acidic Media	11
A Review on the Role of Hydrogen Bonds in Organic Electrode Materials	11
Integrated Sparingly Solvating Electrolyte–Catalyst Strategies to Unlock Lithium–Sulfur Battery Viability: A Perspective	11
Toward Highly Reliable Potassium‐Ion Half and Full Coin Cells	11
Zinc‐Triazolate Metal‐Organic Framework Assisted Synthesis of Germanium Nanoparticles Encapsulated in Nitrogen‐Doped Carbon as Anode Materials for Lithium‐Ion Batteries	11
Sustainable Direct Recycling of Spent Lithium‐Ion Batteries: Closed‐Loop Regeneration and AI‐Optimized Systems Toward Next‐Generation Battery Circular Economy	11
Front Cover: Investigation of Degradation Pathways in Fluoroethylene Carbonate Based Electrolytes via Chromatographic Techniques (Batteries & Supercaps 3/2026)	11
Application of Noninvasive Imaging Techniques for High Energy Density Lithium Metal Rechargeable Batteries	11
Emerging Halide Solid Electrolytes for Sodium Solid‐State Batteries: Structure, Conductivity, Paradigm of Applications	11
Facilitating the Systematic Nanoscale Study of Battery Materials by Atom Probe Tomography through in‐situ Metal Coating	11
Operando Investigation of Al Plating Regimes on HOPG in [EMImCl]:AlCl₃ by Electrochemical Reflection Anisotropy Spectroscopy	11
Na₂S Cathodes Enabling Safety Room Temperature Sodium Sulfur Batteries	11
Cover Feature: A Mechanical Engineering Approach Toward Practical Calcium Metal Anodes with Improved Electrochemical Performance (Batteries & Supercaps 7/2026)	11
Advanced Electrode Materials Based on Brownmillerite Calcium Ferrite for Li‐Ion Batteries	11
In Situ Monitoring of the Al(110)‐[EMImCl] : AlCl₃ Interface by Reflection Anisotropy Spectroscopy	11
N,P‐co‐doped 2D Carbon Nanosheets for High Energy Density Zinc‐Ion Capacitors	11
Next‐Generation LiS Batteries: Impact of Nanowire‐Based Electrocatalysts	11
Thiourea Treatment to Boost the Electrochemical Kinetics and Interfacial Stability of MnCo₂O_4.5 Spinel as a Novel Bifunctional Electrocatalyst for Rechargeable Zn–Air Batteries	11
Sulfur Polymers as Flexible Interfacial Additives for Low Stack‐Pressure Solid‐State Lithium‐Ion Batteries	11
3‐Dimensional Conductive Pathways in Microstructure‐Controlled Composite Cathodes for All‐Solid‐State Batteries	11
Thiophene Based Self‐Doped Conducting Polymers as Cathode for Aqueous Zinc‐Ion Battery	11
A High‐Performance Anode‐Free Aqueous Zinc–Sulfur Batteries Based on Nanostructured Zinc Sulfide Cathode	11
The Effect of Mud Cracking on the Performance of Thick Li‐Ion Electrodes	11
A Long Cycle‐Life and Recyclable Anthraquinone Oligomer Connected via Amide Bonds for Use in Rechargeable Organic Batteries	11
Enhanced Electrochemical Properties of γ‐MnS@rGO Composite as Anodes for Lithium‐Ion Batteries	11
Stress‐Induced Failure Analysis of High‐Capacity SiO_x/Graphite Composite Anodes	11
Bilayer Boost to UV Assisted Supercapacitors: Enhanced Performance with Transparent TiO₂/MoO₃ Heterojunction Electrode	11
Elucidation of the Reaction Mechanisms in Antifluorite‐Type Li_5+xFe_1‐xCo_xO₄ Positive Electrodes for Li‐Ion Batteries	11
Na ₅ FeS ₄ as High‐Capacity Positive Electrode Active Material for All‐Solid‐State Sodium Batterie	11
Elucidating Degradation Mechanisms of Silicon‐graphite Electrodes in Lithium‐ion Batteries by Local Electrochemistry	11
Interface Engineering of Zinc Anodes for Zinc‐Based Flow Batteries	11
Synthesis of Flexible Phase Change Materials with In Situ Formed Porous TiO ₂ for Highly Efficient Battery Thermal Management	10
Fast Magnesium Conducting Electrospun Solid Polymer Electrolyte	10
A Flexible One‐Dimensional Woven Supercapacitor for Low‐Power Smart Electronic Textiles	10
Pushing the Limits: Hydrothermally Synthesized Bi ₂ MnCoO ₆ Electrodes with Exceptional Cyclabilit	10
Progress and Challenges of Water‐in‐Salt Electrolytes: Exploring Physical Chemistry Properties and Solid Electrolyte Interphase Formation Mechanisms	10
Close‐Packed One‐Dimensional Coordination Polymer Cathode with Fast Kinetics for Sodium‐Ion Batteries	10
Structure Optimization for Cellulose‐Based Separator through Fiber Size Regulation for High Performance Lithium Metal Batteries	10
Enhanced Cycling Stability of Lithium‐Rich Cathode Materials Achieved by in‐situ Formation of LiErO₂ Coating	10
Morphology‐Dependent Influences on the Performance of Battery Cells with a Hierarchically Structured Positive Electrode**	10
On the Influence of Li₃InCl₆−PEDOT:PSS Hybrids in Solid‐State Batteries Prepared via an Aqueous One‐Pot Approach	10
Exploring Aluminum‐Antimony Intermetallic Chemistry for High‐Capacity Cheap and Scalable Battery	10
Li Plating/Stripping Efficiency in Ether‐based Dilute Electrolyte for Anode‐free Lithium‐metal Batteries: Effect of Operating Potential Range on Subsequent SEI Layer Structure	10
	10
Metallic 1T‐MoS ₂ ‐Modified CuO@TiO ₂ Anodes Delivering Fast Kinetics and Stable Cycling in Li/Na‐	10
Data‐Driven Online Prognosis of Rechargeable Batteries: Prospect and Perspective	10