Advanced Composites and Hybrid Materials

Papers
(The TQCC of Advanced Composites and Hybrid Materials is 39. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-05-01 to 2024-05-01.)
ArticleCitations
Hierarchically porous Co/C nanocomposites for ultralight high-performance microwave absorption366
Recent advances in transition metal oxides with different dimensions as electrodes for high-performance supercapacitors285
Flexible multilayered MXene/thermoplastic polyurethane films with excellent electromagnetic interference shielding, thermal conductivity, and management performances246
MOF-derived porous hollow Ni/C composites with optimized impedance matching as lightweight microwave absorption materials222
A comprehensive review on fundamental properties and applications of poly(vinylidene fluoride) (PVDF)220
Lightweight Fe3C@Fe/C nanocomposites derived from wasted cornstalks with high-efficiency microwave absorption and ultrathin thickness218
Ultrathin flexible poly(vinylidene fluoride)/MXene/silver nanowire film with outstanding specific EMI shielding and high heat dissipation200
Honeycomb-like nitrogen-doped porous carbon decorated with Co3O4 nanoparticles for superior electrochemical performance pseudo-capacitive lithium storage and supercapacitors181
Flexible polystyrene/graphene composites with epsilon-near-zero properties175
Recent advances in radio-frequency negative dielectric metamaterials by designing heterogeneous composites173
Recent progress in cathode catalyst for nonaqueous lithium oxygen batteries: a review169
Flame-retardant and leakage-proof phase change composites based on MXene/polyimide aerogels toward solar thermal energy harvesting161
Flexible thermally conductive and electrically insulating silicone rubber composite films with BNNS@Al2O3 fillers154
Precise regulation of weakly negative permittivity in CaCu3Ti4O12 metacomposites by synergistic effects of carbon nanotubes and grapheme146
Overview of MXene and conducting polymer matrix composites for electromagnetic wave absorption145
Synthesis of 3D cerium oxide/porous carbon for enhanced electromagnetic wave absorption performance128
Nanocellulose nanocomposite aerogel towards efficient oil and organic solvent adsorption127
Fabrication and applications of cellulose-based nanogenerators126
The weakly negative permittivity with low-frequency-dispersion behavior in percolative carbon nanotubes/epoxy nanocomposites at radio-frequency range126
Polypyrrole/reduced graphene aerogel film for wearable piezoresisitic sensors with high sensing performances126
Strong and highly conductive cellulose nanofibril/silver nanowires nanopaper for high performance electromagnetic interference shielding124
Multifunctional wearable strain/pressure sensor based on conductive carbon nanotubes/silk nonwoven fabric with high durability and low detection limit124
Highly sensitive strain sensors with wide operation range from strong MXene-composited polyvinyl alcohol/sodium carboxymethylcellulose double network hydrogel121
Constructing nickel chain/MXene networks in melamine foam towards phase change materials for thermal energy management and absorption-dominated electromagnetic interference shielding118
Layer-by-layer assembled free-standing and flexible nanocellulose/porous Co3O4 polyhedron hybrid film as supercapacitor electrodes117
Confining FeNi nanoparticles in biomass-derived carbon for effectively photo-Fenton catalytic reaction for polluted water treatment115
Advances in transparent and stretchable strain sensors113
Supramolecular self-assembly synthesis of hemoglobin-like amorphous CoP@N, P-doped carbon composites enable ultralong stable cycling under high-current density for lithium-ion battery anodes113
Research progress for plastic waste management and manufacture of value-added products109
Super-hydrophilic/oleophobic chitosan/acrylamide hydrogel: an efficient water/oil separation filter109
Waterborne polyurethane and its nanocomposites: a mini-review for anti-corrosion coating, flame retardancy, and biomedical applications109
Compressible cellulose nanofibrils/reduced graphene oxide composite carbon aerogel for solid-state supercapacitor107
The art of framework construction: hollow-structured materials toward high-efficiency electromagnetic wave absorption107
Ice template method assists in obtaining carbonized cellulose/boron nitride aerogel with 3D spatial network structure to enhance the thermal conductivity and flame retardancy of epoxy-based composites106
Janus phenol–formaldehyde resin and periodic mesoporous organic silica nanoadsorbent for the removal of heavy metal ions and organic dyes from polluted water106
Synergistic construction of three-dimensional conductive network and double heterointerface polarization via magnetic FeNi for broadband microwave absorption105
Study on broadband microwave absorbing performance of gradient porous structure103
Electrospun PVDF/PAN membrane for pressure sensor and sodium-ion battery separator101
Sandwich-like CoMoP2/MoP heterostructures coupling N, P co-doped carbon nanosheets as advanced anodes for high-performance lithium-ion batteries101
Electrostatic self-assembled NiFe2O4/Ti3C2Tx MXene nanocomposites for efficient electromagnetic wave absorption at ultralow loading level100
Aluminum dihydric tripolyphosphate/polypyrrole-functionalized graphene oxide waterborne epoxy composite coatings for impermeability and corrosion protection performance of metals100
MOF-derived Ni-Co bimetal/porous carbon composites as electromagnetic wave absorber98
N-doped MXene derived from chitosan for the highly effective electrochemical properties as supercapacitor96
One-step microwave hydrothermal preparation of Cd/Zr-bimetallic metal–organic frameworks for enhanced photochemical properties94
Laccase immobilized on functionalized cellulose nanofiber/alginate composite hydrogel for efficient bisphenol A degradation from polluted water94
Synthesis of carbon/SiO2 core-sheath nanofibers with Co-Fe nanoparticles embedded in via electrospinning for high-performance microwave absorption93
Recent progress of perovskite oxides and their hybrids for electromagnetic wave absorption: a mini-review91
Hydrothermal synthesis and applications of advanced carbonaceous materials from biomass: a review90
Oxidative degradation of phenols and substituted phenols in the water and atmosphere: a review90
Effect of carbon nanotubes on the interface evolution and dielectric properties of polylactic acid/ethylene–vinyl acetate copolymer nanocomposites90
Ionic liquid enabled flexible transparent polydimethylsiloxane sensors for both strain and temperature sensing89
Tunable magnetoresistance of core-shell structured polyaniline nanocomposites with 0-, 1-, and 2-dimensional nanocarbons88
Improving thermal conductivity of polyethylene/polypropylene by styrene-ethylene-propylene-styrene wrapping hexagonal boron nitride at the phase interface87
Hyperelastic magnetic reduced graphene oxide three-dimensional framework with superb oil and organic solvent adsorption capability87
Synthesis and characterization of ZnNiCr-layered double hydroxides with high adsorption activities for Cr(VI)87
Zinc oxide nanoparticle incorporated on graphene oxide: an efficient and stable photocatalyst for water treatment through the Fenton process86
Self-template biomass-derived nitrogen and oxygen co-doped porous carbon for symmetrical supercapacitor and dye adsorption85
Fabrication of ternary MXene/MnO2/polyaniline nanostructure with good electrochemical performances85
Enhanced electromagnetic wave absorption of engineered epoxy nanocomposites with the assistance of polyaniline fillers80
Polydopamine-coated chitosan hydrogel beads for synthesis and immobilization of silver nanoparticles to simultaneously enhance antimicrobial activity and adsorption kinetics80
Ultralight MXene/carbon nanotube composite aerogel for high-performance flexible supercapacitor80
Tunable positive magnetoresistance of magnetic polyaniline nanocomposites80
Enhancement of catalytic combustion and thermolysis for treating polyethylene plastic waste80
Hierarchical PVDF-HFP/ZnO composite nanofiber–based highly sensitive piezoelectric sensor for wireless workout monitoring78
Improving thermal conductivity of ethylene propylene diene monomer/paraffin/expanded graphite shape-stabilized phase change materials with great thermal management potential via green steam explosion77
Three-dimensional printing of the copper sulfate hybrid composites for supercapacitor electrodes with ultra-high areal and volumetric capacitances77
Metamaterial mechanical antenna for very low frequency wireless communication77
Dielectric properties and electromagnetic simulation of molybdenum disulfide and ferric oxide-modified Ti3C2TX MXene hetero-structure for potential microwave absorption76
Electrospun structural nanohybrids combining three composites for fast helicide delivery76
Aminated lignin by ultrasonic method with enhanced arsenic (V) adsorption from polluted water75
Magnetoresistive and piezoresistive polyaniline nanoarrays in-situ polymerized surrounding magnetic graphene aerogel75
High-performance strain sensors based on bilayer carbon black/PDMS hybrids75
Multifunctional carbon nanofiber-SiC nanowire aerogel films with superior microwave absorbing performance74
Paraffin/polyethylene/graphite composite phase change materials with enhanced thermal conductivity and leakage-proof74
A high-performance waterborne polymeric composite coating with long-term anti-corrosive property based on phosphorylation of chitosan-functionalized Ti3C2Tx MXene73
Label-free electrochemical aptasensor based on gold nanoparticles/titanium carbide MXene for lead detection with its reduction peak as index signal73
A waterborne polyurethane–based leather finishing agent with excellent room temperature self-healing properties and wear-resistance73
Ultrasensitive wearable strain sensor for promising application in cardiac rehabilitation73
Flax fiber–based polymer composites: a review71
Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content 69
Photoelectrochemical and photocatalytic properties of Fe@ZnSQDs/TiO2 nanocomposites for degradation of different chromophoric organic pollutants in aqueous suspension69
Effective fabrication of flexible nickel chains/acrylate composite pressure-sensitive adhesives with layered structure for tunable electromagnetic interference shielding68
Gelatin-derived N-doped hybrid carbon nanospheres with an adjustable porous structure for enhanced electromagnetic wave absorption68
Modification of coconut shell-based activated carbon and purification of wastewater68
A core–shell-structured APP@COFs hybrid for enhanced flame retardancy and mechanical property of epoxy resin (EP)68
Selective removal of As(V) from wastewater with high efficiency by glycine-modified Fe/Zn-layered double hydroxides67
Silver nanosheets doped polyvinyl alcohol hydrogel piezoresistive bifunctional sensor with a wide range and high resolution for human motion detection66
Electromagnetic interference shielding enhancement of poly(lactic acid)-based carbonaceous nanocomposites by poly(ethylene oxide)-assisted segregated structure: a comparative study of carbon nanotubes66
Flexible, yet robust polyaniline coated foamed polylactic acid composite electrodes for high-performance supercapacitors66
Intumescent fire-retardant coatings for ancient wooden architectures with ideal electromagnetic interference shielding65
An overview of regenerable wood-based composites: preparation and applications for flame retardancy, enhanced mechanical properties, biomimicry, and transparency energy saving64
Tunable negative dielectric properties of magnetic CoFe2O4/graphite-polypyrrole metacomposites64
Facile fabrication of Zn-doped SnO2 nanoparticles for enhanced photocatalytic dye degradation performance under visible light exposure64
Ex situ development and characterization of green antibacterial bacterial cellulose-based composites for potential biomedical applications63
Broadband radar-absorbing performance of square-hole structure63
Thermally conductive glass fiber reinforced epoxy composites with intrinsic self-healing capability63
Thermoplastic polyurethane/titania/polydopamine (TPU/TiO2/PDA) 3-D porous composite foam with outstanding oil/water separation performance and photocatalytic dye degradation63
Preparation, characterization, and antimicrobial activity of chitosan/gum arabic/polyethylene glycol composite films incorporated with black pepper essential oil and ginger essential oil as potential 62
Dual-acting cellulose nanocomposites filled with carbon nanotubes and zeolitic imidazolate framework-67 (ZIF-67)–derived polyhedral porous Co3O4 for symmetric supercapacitors61
Comprehensive electrocatalytic degradation of tetracycline in wastewater by electrospun perovskite manganite nanoparticles supported on carbon nanofibers61
Microwave hydrothermally synthesized WO3/UiO-66 nanocomposites toward enhanced photocatalytic degradation of rhodamine B60
Core–shell activated carbon-ZIF-8 nanomaterials for the removal of tetracycline from polluted aqueous solution60
A highly stretchable natural rubber/buckypaper/natural rubber (NR/N-BP/NR) sandwich strain sensor with ultrahigh sensitivity60
Development and characterization of plant oil-incorporated carboxymethyl cellulose/bacterial cellulose/glycerol-based antimicrobial edible films for food packaging applications60
A critical review of the preparation strategies of thermally conductive and electrically insulating polymeric materials and their applications in heat dissipation of electronic devices60
A highly stretchable, sensing durability, transparent, and environmentally stable ion conducting hydrogel strain sensor built by interpenetrating Ca2+-SA and glycerol-PVA double physically cross-linke60
A study on the influence of metal (Fe, Bi, and Ag) doping on structural, optical, and antimicrobial activity of ZnO nanostructures59
Mace-like carbon fiber/ZnO nanorod composite derived from Typha orientalis for lightweight and high-efficient electromagnetic wave absorber59
Current progress on the 3D printing of thermosets59
Progress and current challenges for CO2 capture materials from ambient air59
Effects of stitch yarns on interlaminar shear behavior of three-dimensional stitched carbon fiber epoxy composites at room temperature and high temperature58
Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy57
High-performance double “ion-buffering reservoirs” of asymmetric supercapacitors enabled by battery-type hierarchical porous sandwich-like Co3O4 and 3D graphene aerogels57
Impedance response behavior and mechanism study of axon-like ionic conductive cellulose-based hydrogel strain sensor56
Photocatalytic oxidation removal of fluoride ion in wastewater by g-C3N4/TiO2 under simulated visible light56
Surfactant-assisted cerium oxide and its catalytic activity towards Fenton process for non-degradable dye56
An investigation of factors affecting the electrospinning of poly (vinyl alcohol)/kefiran composite nanofibers56
Flexible and porous Co3O4-carbon nanofibers as binder-free electrodes for supercapacitors56
A comprehensive review on the thermal, electrical, and mechanical properties of graphene-based multi-functional epoxy composites55
Iron/silicon carbide composites with tunable high-frequency magnetic and dielectric properties for potential electromagnetic wave absorption55
Adjustable core-sheath architecture of polyaniline-decorated hollow carbon nanofiber nanocomposites with negative permittivity for superb electromagnetic interference shielding55
Preparation of polyaniline nanorods/manganese dioxide nanoflowers core/shell nanostructure and investigation of electrochemical performances55
Fabrication and investigation on Ag nanowires/TiO2 nanosheets/graphene hybrid nanocomposite and its water treatment performance54
A mini review on factors affecting network in thermally enhanced polymer composites: filler content, shape, size, and tailoring methods53
Polyaniline improves granulation and stability of aerobic granular sludge52
Synthesis of GO/HEMA, GO/HEMA/TiO2, and GO/Fe3O4/HEMA as novel nanocomposites and their dye removal ability52
A hierarchical graphitic carbon nitride supported by metal–organic framework and copper nanocomposite as a novel bifunctional catalyst with long-term stability for enhanced carbon dioxide photoreducti52
Development of novel biomass hybrid aerogel supported composite phase change materials with improved light-thermal conversion and thermal energy storage capacity52
Dislocation motion in plastic deformation of nano polycrystalline metal materials: a phase field crystal method study51
Advances in triboelectric nanogenerator technology—applications in self-powered sensors, Internet of things, biomedicine, and blue energy51
Temperature effect of photovoltaic cells: a review50
Direct ink printing reduced graphene oxide/KCu7S4 electrodes for high-performance supercapacitors50
Immobilization of graphitic carbon nitride on wood surface via chemical crosslinking method for UV resistance and self-cleaning50
Strengthening waterborne acrylic resin modified with trimethylolpropane triacrylate and compositing with carbon nanotubes for enhanced anticorrosion50
Mechanically robust and conductive poly(acrylamide) nanocomposite hydrogel by the synergistic effect of vinyl hybrid silica nanoparticle and polypyrrole for human motion sensing49
Constructing dual thermal conductive networks in electrospun polyimide membranes with highly thermally conductivity but electrical insulation properties49
Polyethyleneimine-modified magnetic starch microspheres for Cd(II) adsorption in aqueous solutions49
Improving high-temperature energy storage performance of PI dielectric capacitor films through boron nitride interlayer49
Study on Favorable Comprehensive Properties of Superhydrophobic Coating Fabricated by Polytetrafluoroethylene Doped with Graphene48
A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites48
Synergetic effect of Ni-Au bimetal nanoparticles on urchin-like TiO2 for hydrogen and arabinose co-production by glucose photoreforming48
Synergistically improved methane production from anaerobic wastewater treatment by iron/polyaniline composite48
Resistance to aggregation-caused quenching: chitosan-based solid carbon dots for white light-emitting diode and 3D printing48
Hybrid 0D/2D heterostructures: in-situ growth of 0D g-C3N4 on 2D BiOI for efficient photocatalyst47
Effect of phosphating solution pH value on the formation of phosphate conversion coatings for corrosion behaviors on AZ91D47
A novel phosphorous and silicon-containing benzoxazine: highly efficient multifunctional flame-retardant synergist for polyoxymethylene47
Recent advances in the application of carbon-based electrode materials for high-performance zinc ion capacitors: a mini review46
Comparisons of antibacterial performances between electrospun polymer@drug nanohybrids with drug-polymer nanocomposites46
Fluorescent probe of nitrogen-doped carbon dots derived from biomass for the sensing of MnO4− in polluted water based on inner filter effect45
High strength, flexible, and conductive graphene/polypropylene fiber paper fabricated via papermaking process45
Synthesis of CsPbBr3/CsPb2Br5@silica yolk-shell composite microspheres: precisely controllable structure and improved catalytic activity for dye degradation45
Promotion of skin regeneration through co-axial electrospun fibers loaded with basic fibroblast growth factor45
Cooperation between covalent organic frameworks (COFs) and metal organic frameworks (MOFs): application of COFs-MOFs hybrids45
Multifunctional hierarchical graphene-carbon fiber hybrid aerogels for strain sensing and energy storage45
Modification strategies to improve the membrane hemocompatibility in extracorporeal membrane oxygenator (ECMO)44
Frontal ring-opening metathesis polymerized polydicyclopentadiene carbon nanotube/graphene aerogel composites with enhanced electromagnetic interference shielding44
Modifying coconut shell activated carbon for improved purification of benzene from volatile organic waste gas44
Printed hydrogel nanocomposites: fine-tuning nanostructure for anisotropic mechanical and conductive properties44
Bio-inspired catalytic one-step prepared R-siloxane cellulose composite membranes with highly efficient oil separation44
Efficient photothermal deicing employing superhydrophobic plasmonic MXene composites44
Thermal performance of novel form-stable disodium hydrogen phosphate dodecahydrate-based composite phase change materials for building thermal energy storage43
Applications of machine learning in perovskite materials43
Electrospun poly(vinyl alcohol)/silica film for radiative cooling43
Biodegradable and injectable poly(vinyl alcohol) microspheres in silk sericin-based hydrogel for the controlled release of antimicrobials: application to deep full-thickness burn wound healing43
Energy- and cost-efficient salt-assisted synthesis of nitrogen-doped porous carbon matrix decorated with nickel nanoparticles for superior electromagnetic wave absorption42
Aqueous flexible all-solid-state NiCo-Zn batteries with high capacity based on advanced ion-buffering reservoirs of NiCo2O442
Synthesis of graphitic carbon nitride/zinc oxide (g-C3N4/ZnO) hybrid nanostructures and investigation of the effect of ZnO on the photodegradation activity of g-C3N4 against the brilliant cresyl blue 42
Synthesis, characterization and application of Carboxylmethyl cellulose, Guar gam, and Graphene oxide as novel composite adsorbents for removal of malachite green from aqueous solution41
Combined bactericidal process of lignin and silver in a hybrid nanoparticle on E. coli41
An innovative modified calcium chloride hexahydrate–based composite phase change material for thermal energy storage and indoor temperature regulation41
Effect of sodium lignosulfonate on bonding strength and chemical structure of a lignosulfonate/chitosan-glutaraldehyde medium-density fiberboard adhesive40
Flexible silver nanowire dry electrodes for long-term electrocardiographic monitoring40
Highly fire-retardant optical wood enabled by transparent fireproof coatings40
Fast self-healing and antifouling polyurethane/fluorinated polysiloxane-microcapsules-silica composite material40
Electrospun Janus core (ethyl cellulose//polyethylene oxide) @ shell (hydroxypropyl methyl cellulose acetate succinate) hybrids for an enhanced colon-targeted prolonged drug absorbance40
Dielectric enhancement effect in biomorphic porous carbon-based iron@iron carbide ‘meta-powder’ for light-weight microwave absorption material design40
Properties and mechanism of two-way shape memory polyurethane composite under stress-free condition40
Sulfonated poly(fluorenyl ether ketone)/Sulfonated α-zirconium phosphate Nanocomposite membranes for proton exchange membrane fuel cells39
Integrated approaches for waste to biohydrogen using nanobiomediated towards low carbon bioeconomy39
A novel analysis of the dielectric properties of hybrid epoxy composites39
Enhanced photoresponsivity of anatase titanium dioxide (TiO2)/nitrogen-doped graphene quantum dots (N-GQDs) heterojunction-based photodetector39
Three-dimensional phase-field simulations of the influence of diffusion interface width on dendritic growth of Fe-0.5 wt.%C alloy39
Study on the effects of fibre volume percentage on banana-reinforced epoxy composite by finite element method39
Hollow carbon microspheres modified with NiCo2S4 nanosheets as a high-performance microwave absorber39
Highly sensitive and selective non-enzymatic uric acid electrochemical sensor based on novel polypyrrole-carbon black-Co3O4 nanocomposite39
Hierarchical NiCo2S4 nanostructures anchored on nanocarbons and Ti3C2Tx MXene for high-performance flexible solid-state asymmetric supercapacitors39
Copper nanoparticle-deposited graphite sheets for highly thermally conductive polymer composites with reduced interfacial thermal resistance39
Critical operation factors and proposed testing protocol of nanofiltration membranes for developing advanced membrane materials39
Benzyl(4-fluorophenyl)phenylphosphine oxide-modified epoxy resin with improved flame retardancy and dielectric properties39
0.057575941085815