Journal of the Australian Ceramic Society

Article	Citations
Influence of modifier oxide on the structural and radiation shielding features of Sm3+-doped calcium telluro-fluoroborate glass systems	66
Study of the radiation attenuation properties of MgO-Al2O3-SiO2-Li2O-Na2O glass system	44
An important role of Ba2+, Sr2+, Mg2+, and Zn2+ in the radiation attenuation performance of CFCBPC bioactive glasses	41
Effects of MgO addition on the radiation attenuation properties of 45S5 bioglass system at the energies of medical interest: an in silico study	29
Zn-doped hydroxyapatite in biomedical applications	25
Effects of TeO2 and B2O3 on photon, neutron, and charged particle transmission properties of Bi2O3-BaO-LiF glass system	22
Comprehensive study of radiation shielding and mechanical features of Bi2O3-TeO2-B2O3-GeO2 glasses	21
Influence of ceramic properties on the ballistic performance of the hybrid ceramic–multi-layered UHMWPE composite armour	20
Ce/Sm co-doped hydroxyapatites: synthesis, characterization, and band structure calculation	18
Attenuation properties and radiation protection efficiency of Tb2O3-La2O3-P2O5 glass system	18
Control of the setting reaction and strength development of slag-blended volcanic ash-based phosphate geopolymer with the addition of boric acid	18
Enhancement of structural and optical properties of transparent sodium zinc phosphate glass–ceramics nano composite	17
High-temperature impedance and alternating current conduction mechanism of Ni0.5Zn0.5WO4 micro-crystal for electrical energy storage application	17
Investigation of the effects of Pr doping on the structural properties of hydroxyapatite: an experimental and theoretical study	17
Investigation on physicochemical properties of graphene oxide/nano-hydroxyapatite composites and its biomedical applications	17
B2O3-Bi2O3-Li2O3-Cr2O3 glasses: fabrication, structure, mechanical, and gamma radiation shielding qualities	16
A comprehensive study on the charged-uncharged particle shielding features of (70 − x) CRT–30K2O–xBaO glass system	15
Investigation of high catalytic activity catalyst for high hydrogen production rate: Co-Ru@MOF	15
Evaluation of adhesion strength of TiN layer applied on 316L substrate by electrophoretic deposition	14
Effect of TiN, TiAlCN, AlCrN, and AlTiN ceramic coatings on corrosion behavior of tungsten carbide tool	14
Investigation of structural, optical, and magnetic properties of Co2+ ions substituted CuFe2O4 spinel ferrite nanoparticles prepared via precipitation approach	13
Preparation and characterization of pure natural hydroxyapatite derived from seashells for controlled drug delivery	13
Synthesis and characterization of BaFe12O19-CoFe2O4 ferrite composite for high-frequency antenna application	13
Mechanical and biological response of (CeO2+La2O3)-substituted 45S5 bioactive glasses for biomedical application	13
The role of nanoparticles inclusion in monitoring the physical properties of PVDF	12

Synthesis, characterization and photocatalytic activities of Al-doped ZnO for degradation of methyl orange dye under UV light irradiation	11
Synthesis, characterization, and antimicrobial properties of strontium-substituted hydroxyapatite	11
Synthesis of efficient TiO2/Al2O3@Cu(BDC) composite for water splitting and photodegradation of methylene blue	11
Functionalization of kaolin clay with silver nanoparticles by Murraya koenigii fruit extract-mediated bioreduction process for antimicrobial applications	11
Investigation of photocatalytic activity of TiO2 nanoparticles synthesized by sol–gel technique	10
Synthesis of Co-doped NiO/AC photocatalysts and their use in photocatalytic degradation	10
Optical and radiation shielding properties of titano-phosphate glasses: influence of BaO	9
Enhancement of mechanical and toughness properties of carbon fiber-reinforced geopolymer pastes comprising nano calcium oxide	9
Mechanical properties and elastic moduli, as well as gamma-ray attenuation abilities: A wide-ranging investigation into calcium/sodium/phosphate glasses	9
Characteristics of Ni-doped TiO2 nanorod array films	9
Preparation and characterization of microrod hydroxyapatite bundles obtained from oyster shells through microwave irradiation	9
Anodic TiO2 nanotube: influence of annealing temperature on the photocatalytic degradation of carbamazepine	9
Investigation of the usability of Sille stone as additive in floor tiles	8
CuO reinforced lithium-borate glasses: fabrication, structure, physical properties, and ionizing radiation shielding competence	8
Structural, morphological, and gas sensing properties of Co-doped ZnO nanoparticles	8
Influence of selenium dioxide (SeO2) on properties of bioglass in SiO2-Na2O-CaO-P2O5 system	8
Effect of titanium oxide addition on magnesia refractories	8
Synthesis, characterization, and UV light-driven photocatalytic properties of CeVO4 nanoparticles synthesized by sol-gel method	8
Temperature-controlled synthesis and photocatalytic properties of ZnO–SnO2 nanocomposites	8
Characterization of eggshell-derived hydroxyapatite on Ti6Al4V metal substrate coated by sol–gel method	8
Effects of biomimetic synthesis route and sintering temperature on physicochemical, microstructural, and mechanical properties of hydroxyapatite	8
Kinetics of catalytic hydrolysis of NaBH4 solution: Ni-La-B catalyst	8
Structural, optical, and dielectric properties of the BaO–TiO2–P2O5 glasses	7
Theoretical and experimental characterization of Sn-based hydroxyapatites doped with Bi	7
Visible-light-active chlorophyll/flavonoid-sensitized ZnO nanoparticles: preparation and optical and photocatalytic studies	7
Physical, structural, and gamma ray shielding studies on novel (35+x) PbO-5TeO2-20Bi2O3-(20-x) MgO-20B2O3 glasses	7
Degradation of rhodamine B photocatalyzed by hydrothermally prepared Pd-doped Bi2MoO6 nanoplates	7
Feasibility of as-prepared reticulated porous barium titanate without additional radar-absorbing material coating in potential military applications	7
Effect of MnO on the crystallization, microstructure, and properties of MgO-Al2O3-SiO2 glass-ceramics	7
Production, characterization, and cytotoxicity of calcium phosphate ceramics derived from the bone of meagre fish, Argyrosomus regius	7
Comparative study: nanosilica, nanoalumina, and nanozinc oxide addition on the properties of localized geopolymer	7
Evaluating the optical and gamma-ray protection properties of bismo-tellurite sodium titanium zinc glasses	7
Fabrication, characterization, and in vitro bioactivity evaluation of freeze-cast highly porous hardystonite ceramic reinforced by graphene oxide as a novel bone scaffold	7
Physical properties and sinterability of pure and iron-doped bismuth sodium titanate ceramics	7
Synthesis and cytotoxicity analysis of porous β-TCP/starch bioceramics	7
Radiation shielding performance of Co2O3–TeO2–Li2O–ZrO2 glass–ceramics	7
Effect of addition of B2O3 to the sol-gel synthesized 45S5 bioglass	7
Zirconium oxide and the crystallinity hallows	7
Improving the performance of nuclear protection of Al2Si2O5(OH)4–KAlSi3O8–SiO2 ceramics with cobalt insertion: an experimental study	7
Photocatalytic degradation of organic dye over bismuth vanadate–silicon dioxide–graphene oxide nanocomposite under visible light irradiation	7
Preparation of porous MgAl2O4 ceramics by a novel pectin gel-casting process	6
An ab initio study of chlorine and fluorine doping on Li2FeSiO4 as cathode materials for Li-ion battery	6
Towards a better understanding of filler size on radiation shielding enhancement: impact of micro- and nano-WO3/PbO particle reinforcement on ILC concrete	6
Graphene oxide reinforced doped dicalcium phosphate bone cements for bone tissue regenerations	6
Influence of various types of surface modifications on the shear bond strength of orthodontic brackets on Y-TZP zirconia ceramics	6
Sr/Ce co-immobilization evaluation and high chemical stability of novel Sr0.5Zr2(PO4)3–CePO4 composite ceramics for nuclear waste forms	6
The synthesis of hydroxyapatite from artificially grown Red Sea hydrozoan coral for antimicrobacterial drug delivery system applications	6
The effect of graphene addition on the properties of SiC ceramics—a review	6
Preparation of porous mullite ceramic for high temperature flue gas filtration application by gel casting method	6
Fe3O4 nanomaterials: synthesis, optical and electrochemical properties	6

Hydrothermal synthesis of mesoporous cobalt ferrite by ionic liquid-assisted process; catalytic performance, morphology, and magnetic studies	5
Gamma ray interaction studies of the PbCl2–SnCl2–P2O5 bioactive glass system for applications in nuclear medicine	5
Ultrasonic waves, mechanical properties and radiation shielding competence of Er3+ doped lead borate glasses: experimental and theoretical investigations	5
Marine-derived bioceramics for orthopedic, reconstructive and dental surgery applications	5
Synthesis and characterization of ((La1-xGdx)2Zr2O7; x = 0, 0.1, 0.2, 0.3, 0.4, 0.5, 1) nanoparticles for advanced TBCs	5
Simulation of neutron and gamma radiation shielding properties of KNN-LMN lead-free relaxor ceramics	5
Investigation of the elastic moduli, optical characteristics, and ionizing radiation attenuation capacity of specific strontium borosilicate glasses	5
Self-setting β-tricalcium phosphate granular cement at physiological body condition: effect of citric acid concentration as an inhibitor	5
A novel gypsum-based lightweight composite: a combined investigation of technical and self-cleaning properties	5
A comparative study on physicochemical properties of hydroxyapatite powder prepared from bovine and dromedary bone	5
Micromechanical modeling of loading rate–dependent tensile damage and fracture behavior in fiber-reinforced ceramic-matrix composites	5
The corrosion behavior of Ni–Fe and Ni–Fe–TiC nanoparticles deposited using pulse electrodeposition on low-carbon steel	5
Superhydrophobic ceramic hollow fibre membranes for trapping carbon dioxide from natural gas via the membrane contactor system	5
Simple and efficient synthesis of graphite nanocomposites with hydrophobic cobalt ferrite nanoparticles	5
Fabrication and analysis of lightweight magnesia refractories with micro-nanometer double pore size structure	5
Heparin as a biomimetic template on nanoapatite rods with tunable aspect ratio: synthesis and biocompatibility	5
Efficiency of TiO2-supported Ni-Mo-Ru–B catalyst for hydrogen production from potassium borohydride hydrolysis	5
The role of titania on gamma and neutron attenuation competence of sodium lead borosilicate glasses	5
Effect of firing temperature on self-cleaning and photocatalytic performance of clay-based bricks under visible light irradiation	5
Mechanochemical-assisted synthesis and characterization of Al2O3/B4C ceramics	5
Hydrophobic effect evolution dependent manipulation of ZnO nanostructures morphology	5
Influence of the particle size distribution of coarse-grained refractories on the thermal shock performance	5
Phonon confinement and size effect in Raman spectra of TiO2 nanocrystal towards Photocatalysis Application	5
Hot corrosion behavior of ZrO2 9.5Y2O3 5.6Yb2O3 5.2Gd2O3 TBCs in CMAS: CaO-MgO-Al2O3-SiO2	5
Investigation of the effects of Ni-doping on the structural and thermal properties of ZnAl2O4 spinels prepared by wet chemical method	5
Microhardness and corrosion resistance of plasma sprayed bioceramic bilayer coated Ti-6Al-4V implants	5
Preparation of ultrafine molybdenum carbide (Mo2C) powder by carbothermic reduction of molybdenum trioxide (MoO3)	5
Investigating the effects of hydrothermal temperature on morphology-controlled synthesis of flower-shaped ZnO microstructures	4
Fabrication of FeSi/α-FeSi2–based composites by metallothermically assisted combustion synthesis	4
Utilization of sawdust as a pore-former in the fabrication of ceramic adsorbents for water purification	4
Ag2O/GO/TiO2 composite nanoparticles: synthesis, characterization, and optical studies	4
Electrical properties of a Cr2O3-modified Na0.5Bi4.5Ti4O15-Na0.5Bi0.5TiO3 composite ceramic	4
Influence of Ca and Al source on elevated temperature behavior of waste ceramic sanitaryware-based alkali-activated mortars	4
Effect of indentation size on strain rate sensitivity of zirconia ceramics by nanoindentation	4
Ionizing radiation shielding efficiency and elastic properties of zirconium/cobalt/nickel/vanadium lithium borotellurite glasses	4
ZnO/Al2O3 layered structures deposited by RF magnetron sputtering on glass: growth characteristics, optical properties, and microstructural analysis	4
Electrical conductivity behavior of ZrO2-MgO-Y2O3 ceramic: effect of heat treatment temperature	4
Physicochemical changes of hydroxyapatite, V2O5, and graphene oxide composites for medical usages	4
Gamma ray shielding properties of CeO2-added hydroxyapatite composite	4
Alkaline earth metal substitution effects in sol-gel–derived mixed metal oxides and Mg2-xMx/Al1 (M = Ca, Sr, Ba)–layered double hydroxides	4
A comparative study on physico-mechanical and bioactivity properties of β-wollastonite derived from rice husk ash and calcined limestone drying through freeze-dried and incubator technique	4
Effect of ZnO addition on structure,bioactivity, and corrosion protection of mica-fluorapatite glass/glass-ceramic	4
Gamma-ray shielding properties of some dosimetric materials	4
Salt leaching using powder (SLUP) process for glass/chitosan scaffold elaboration for biomaterial applications	4
Hydrothermal synthesis, characterization and photocatalytic properties of Au-doped Bi2MoO6 nanoplates	4
The effect of deposition temperature on microstructure and mechanical properties of SiC coatings on graphite	4
Effect of calcined colemanite addition on properties of porcelain tile	4
Fabrication of PMMA/phosphogypsum non-fired ceramic composites with improved mechanical and waterproof properties	4
Synthesis of randomly oriented self-assembled WO3 and WO3-WS2 nanoplates for selective oxygen sensing	4
Production of Zn-doped TiO2 film with enhanced photocatalytic activity	4
The utilization of waste cooking palm oil as a green carbon source for the growth of multilayer graphene	4
New insight into treatment of foundry waste: porous insulating refractory based on waste foundry sand via a sacrificial fugitive route	4
Fabrication and in vitro characterization of macroporous WS2/ bioactive glass scaffolds for biomedical applications	4
Production of B4C-TiB2 composite powder by self-propagating high-temperature synthesis	4
Investigation of the effects of varying amount of graphene nanoplatelets’ (GNPs) addition on carbon nanotubes (CNTs) reinforced boron carbide produced by spark plasma sintering	4
High-bandwidth microwave dielectric resonator antennas from BiVO4/ZnO composites	4
Push-out bond strength of Biodentine, MTA repair HP, and a new pre-mixed NeoPutty bioactive cement: scanning electron microscopy energy dispersive X-ray spectroscopy analysis	4
Antifungal effects of ZnO-TiO2/Au nanostructures on Aspergillus flavus	4
Enhanced mechanical and thermal insulation properties of mullite-based thermal insulation materials by heat treatment in reducing atmosphere	4
Synthesis and characterizations of ferrite/polypyrrole composites for electromagnetic shielding	4
The influence of sintering temperature on structural and electrical properties of x (Ca0.28Ba0.72)Nb2O6-(1-x) (Sr0.61Ba0.39)Nb2O6 ceramics	4
Physical and spectroscopic studies of CaF2-Al2O3-Bi2O3-B2O3-CuO glasses	4
Preparation and characterization of spinel SrFe2O4 nanoparticles by method sol-gel	4
The crucial role of hydrogenation in the creation of ferromagnetic properties in W-doped TiO2 nano-composite	4
Dielectric properties and device performance of (Pb0.7 Dy0.15 Bi0.15)(Fe0.3Ti0.7)O3 electronic material	3
Crystallization behaviors and properties of Ti-bearing blast furnace slag-based glass ceramics with varying CaO/SiO2 mass ratio	3
Evaluation of hydroxyapatite- and zinc-coated Ti-6Al-4V surface for biomedical application using electrochemical process	3
Differences in phase, microstructural, and electrical characteristics of quartz-substituted alumina porcelain insulator	3
Influence of Co substitution on crystal structures, Raman spectroscopy, and microwave dielectric properties of Mg2SnO4 ceramics	3
Brucite structure doped with different amounts of Er(III) and their infrared emissions	3
A study on calcium phosphate/barium titanate composites: phase characterization, piezoelectric property, and cytocompatibility	3
Effects of preparing conditions on the synthesis of Y2SiO5 nanoparticles by low-temperature molten salt method	3
Study of SrLa0.04Fe1.96O4/polyaniline composites for improving microwave absorption	3
Electron paramagnetic resonance and optical properties of Cu+2 in PbO-Li2O-As2O3-B2O3 glasses	3
Influence of ternary divalent cations (Mg2+, Co2+, Sr2+) substitution on the physicochemical, mechanical and biological properties of carbonated hydroxyapatite scaffolds	3
Physical properties and photocatalytic activity of new classes of Mx-ZnO-Bi2O3-WO3 and Mx-ZnO-Bi2O3-MoO2 (M = None, Fe, Co, and Ni) nanocomposites	3
Electrochemical performance of the Mn-doped CeO2: nanoparticles for sensitive electrocatalysts the urea concentrations	3
Study of dielectric and magnetic properties of CaCu3Ti4-XMnXO12 (X = 0 and 0.1) ceramic synthesized through semi-wet route	3
Preparation of cordierite powder by chemical coprecipitation–rotation evaporation and solid reaction sintering	3
Effect of ZrC nanopowder addition in WC preforms on microstructure and properties of W–ZrC composites prepared by the displacive compensation of porosity (DCP) method	3

The effect of different blade designs on shear bond strength of veneering ceramics fused to zirconia	3
Experimental and theoretical characterization of Dy-doped hydroxyapatites	3
A comparative analysis of microwave assisted natural (Murex virgineus shell) and chemical nanohydroxyapatite: structural, morphological and biological studies	3
Co-dopants effect on translucent SiAlON ceramics production	3
A comparative study of hardness/scratch/wear properties of TiCN and TiAlN coatings on DIN 1.2842 steel by CA-PVD method	3
Co-doping of ions on structural, mechanical, dielectric, and surface analysis on hydroxyapatite composites	3
Application of DOE method in evaluating for split tensile strength of slag-based boroaluminosilicate geopolymers reinforced with steel fibers	3
Synthesis and characterization of Ag-doped CeO2 powders	3
Numerical and analytical investigation of ballistic performance of composite targets with ceramic-polyurea-metal layers and optimization of the layer thicknesses	3
Inhibition of pathogenic bacteria by using cupric oxide nanostructures synthesized via CTAB-assisted hydrothermal route	3
Preparation and thermal shock resistance of sialon/SiC composite ceramics used for solar absorber	3
Modification of TiO2 with Ag nanoparticles using gamma irradiation method for photocatalytic degradation of azo dye	3
Effect of PbO impurities on the structural and physical properties of CeCu@Na2B4O7 glasses: For shielding and terahertz applications	3
Effect of in situ formed acicular mullite whiskers on thermal shock resistance of alumina-mullite refractories	3
Electrical behaviour of yttrium-doped potassium sodium niobate thin film for piezoelectric energy harvester applications	3
Nitrogen implantation of zinc arsenic tellurite glasses	3
Nickel ferrite magnetic nanoparticles: evidence for superparamagnetism in smaller size particles	3
Bond strength evaluation of lithium disilicate and zirconium oxide-based substructures using two different veneering techniques	3
Formation of silicide/spinel ceramic composites via Al- and Mg-based thermitic combustion synthesis	3
Effects of SiC addition on microstructure and properties of WC–6Co cemented carbide prepared by SPS	3
Microwave-assisted synthesis of heterostructure Pd/ZnO flowers used for photocatalytic reaction of dyes illuminated by UV radiation	3
A novel sucrose chelated visible-light sensitive AFO NPs: preparation, characterization, photocatalytic activity, and reaction mechanism	3
Preparation and characterization of spray pyrolysized strontium-silver-doped mesoporous bioactive glass micron spheres	3
Effect of colloidal nanosilica as an admixture on chloride ion diffusion of Portland cement–fly ash mortars	3
Thermal oxidation resistance of quaternary TiAlCrN coatings prepared with cathodic arc evaporation	3
Micron-sized ore powder production by propulsion and rapid unloading of high-pressure gas	3
Heterogeneous photocatalytic reduction of hexavalent chromium by modified Ag, Cu co-doped tungsten oxide nanoparticles	3
Hydrothermal synthesis of Ag2MoO4 with photocatalytic activity for rhodamine B degradation	3
A review on the behavioral responses of osteoclast and osteoblast cells on the near-surface of the bioceramic coating: roles of ions released, solubility, and pH	3
P2O5–Pb3O4–ZnO–Li2CO3–CuO glasses and their radiation attenuation properties for shielding applications	3
Preparation of porous β-SiAlON ceramics using corn starch as pore-forming agent	3
Fabrication and characterization of Al2O3-TiB2 nanocomposite powder by mechanochemical processing	3
Synthesis and characterization of visible light-driven Cl-doped SnO2 photocatalysts	3
Bioactive glass-ceramic synthesis using nano and normal silica: a comparative study	3
Fabrication of nitride films by co-sputtering of high-entropy alloys and tungsten	3
Improving electric insulation characteristics of PVA/V2C MXene composite high-dielectric-constant films by blending cellulose	3
Investigation of optical and structural properties of tin-doped copper oxide thin films prepared by the drop-cast method	3
A facile synthesis method for in situ composites of TiB2/B4C and ZrB2/B4C	3
Fabrication of AlN nanoparticles by arc discharge method and investigation of thermal conductivity of AlN transformer oil-based nanofluid	3
Understanding the control of inclusion of SrO to the Li2O -K2O-B2O3-SrO glasses on the physical, structural, and gamma ray shielding performance	2
New cobalt phthalocyanine–graphene oxide hybrid nanomaterial prepared by strong π–π interactions	2
Effect of MgO addition on the sinterability, mechanical properties and biological cell activities of sintered silicon-substituted hydroxyapatite	2
Improvement toughness of SiC ceramic by adding Cr2O3 and annealing process	2
Effect of surface treatments on shear bond strength between CAD/CAM bioceramic and resin blocks and orthodontic metal brackets bonded to each other	2
Wear and high-temperature stability of TiCN-WC-Co-Cr3C2-HfC-Si3N4 cermets	2
Effects of CaO addition on the properties and microstructure of low-grade bauxite-based lightweight ceramic proppant	2
Structural, magnetic, and impedance properties of Co1-xZrxFe2O4 nanocrystallites by PEG-assisted sol-gel route	2
3D flower-like sulfide-based heterostructures with high photocatalytic efficiency on dye degradation and Cr (VI) reduction	2
Enhanced energy storage performance and magnetocapacitance effect of polycrystalline BiFeO3 ceramics	2
Preparation and characterization of spray-pyrolyzed porous SiO2 nanoparticles for low dielectric constant applications	2
Effect of iron nanoparticles on spark plasma sinterability of ZrB2-based ceramics	2
The effect of alpha-lithium aluminate incorporation on the properties of bovine bone-derived hydroxyapatite	2
Preparation of rare earth borides by reaction among rare earth oxides, boron carbide, and calcium	2
Sr/Smco-doped hydroxyapatites: experimental characterization and theoretical research	2
Hydrothermal synthesis of C-doped K2Al2Ti6O16 as a visible light–activated photocatalyst in the degradation of organic dyes	2
Synthesis, structural and magnetic properties of NiFe2–xLaxO4 (0 ≤ x ≤ 0.10) nanoparticles	2
Assessing influences of different factors on the compressive strength of geopolymer-stabilised compacted earth	2
Controlled morphologies and hydration process of hydratable alumina by using citric acid	2
Controlling the electric field characteristics to suppress the clogging and corrosion of the continuous casting nozzle	2
Synthesis and characterization of 3d transition metal–doped aluminum oxide powders with enhanced photodegradation performance under sunlight irradiation	2
Preparation and chemical stability evaluation of new (Nd,An)2Zr2O7-SrZrO3 multiphase ceramics	2
Microstructural-mechanical co-relation for Al2O3 reinforced aluminum metallic foam processed by compaction and sintering	2
Electrical and magnetic properties of BiFeO3 nanoparticles substituted with high concentrations of cobalt	2
Synthesis, structural and dielectric studies of magnetoelectric lead nickel niobate ceramics	2
Effects of temperature and pH on the synthesis of nanohydroxyapatite powders by chemical precipitation	2
Green synthesis routes for spinel ferrite nanoparticles: a short review on the recent trends	2
Effect of magnetic field in excess conductivity of $$Y_{3}Ba_{5}Cu_{8}O_{18\pm \delta }$$ ceramic doped with tin-oxide nanoparticles	2
Preparation of ciprofloxacin-loaded oyster shell derived hydroxyapatite composite film for biomedical applications	2
Deep eutectic solvent based on choline chloride and phenol as electrolyte additives in dye-sensitized solar cells: a comparison with 4-tert-butylpyridine	2
The ion irradiation tolerance of the fluorite RE2MO5 (RE = Sm, and Yb, M = Ti, Zr, and Sn) system	2
Spectroscopic studies of preparation conditions role on the shielding properties of MoO3-doped Na2O–ZnO–P2O5	2
Novel nano triphasic bioceramic composite coating on 316L SS by electrophoretic deposition process for enhanced corrosion resistance and cell proliferation	2
Effect of sintering temperature on perovskite-based hollow fiber as a substrate for cathode-supported micro-tubular solid oxide fuel cell	2
Microstructural and mechanical characterization of ceria-stabilized tetragonal zirconia/alumina composites produced through a segregated-network approach for ceramic bushing applications	2
Preparation and characterization of green glazes using ferrochromium slag waste	2
Effects of nano-SiO2 particles on physio-chemical properties of bioactive tricalcium silicate cements	2
Hydroxyapatite materials-synthesis routes, mechanical behavior, theoretical insights, and artificial intelligence models: a review	2
Preparing weathering-resistant superhydrophobic polymer/bentonite nano-composites for waterproof garment textiles via electrospinning	2
Effect of plasma spraying parameters on wear and scratch resistance of Al2O3-40 Wt.% YSZ ceramic coatings deposited on Ti-6Al-4 V alloy	2
Investigation of in vitro bioactivities of Zn-based hydroxyapatite samples doped with chitosan	2
A comprehensive review of the effects of porosity and macro- and micropore formations in porous β-TCP scaffolds on cell responses	2
Chemical and radiation shielding effectiveness of some heavy metal oxide glasses for immobilizing radioactive wastes	2
Porous hydroxyapatite scaffold produced using Musa paradisiaca template and its in vitro bioactivity	2
Electrical and gamma ray shielding characteristics of zinc-borovanadate glasses mixed with MnO	2
Ion-exchange diffusion kinetics and compressive stress analysis of float soda lime silicate glasses	2
On tungsten barium phosphate glasses: Elastic moduli, gamma-ray shielding properties as well as transmission factor (TF)	2
The effect of annealing temperature on hydrothermally grown sisal-like ZnO microstructures	2
Synthesis and characterization of zinc oxide decorated on graphene oxide: morphology selection and biological assessment	2
Influences of biosilica content from Amazonian freshwater sponge on calcium phosphates	2
Synthesis of nano-crystalline Ti2SC by molten salt route	2
Physical, electrochemical, and biocompatibility characteristics of Ti-Al-N thin film synthesized by DC pulsed magnetron sputtering	2
Comparison of electrical properties of ZnO-Bi2O3-based ceramics prepared by conventional and spark plasma sintering (SPS) methods	2
Influence of precursor composition on oxidation behavior of SiBCN multiphase ceramic and oxidation resistance of SiC/SiBCN composites	2
Effect of (Co and Zn) doping on structural, characterization and the heavy metal removal efficiency of CuFe2O4 nanoparticles	2
Effect of isothermal treatment on the structural, microstructure, and physio-mechanical properties of Li2O-Al2O3-SiO2 glass–ceramic	2