OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Science-Advanced Materials and Devices is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-10-01 to 2025-10-01.)

Article	Citations
Proanthocyanidin-Imbued cellulosic 3-Dimensional intrinsic aligned Nanostructures: A novel approach for dental and bone regeneration using dental pulp derived stem cells	83
Surface engineering for enhanced wicking: The role of laser machining and surface roughness	66
Editorial Board	65
Power enhancement of vibration energy harvesters by way of magnetic flux gradient analysis of electromagnetic induction	64
PVA/gelatin hydrogel loaded with propolis for the treatment of myocardial infarction	59
Development of a lightweight carbon fiber reinforced plastic water tank for fire trucks	48
Broadband mid-infrared thermal emission with large degree of circular polarization enabled by symmetry-broken metasurfaces	41
Editorial Board	35
Carbon Quantum Dots from Hybrid Poplar Leaf Dye for Enhanced Optical Properties of PVA Composites: Green Solvothermal Synthesis and Spectroscopic Analysis	31
Design and numerical simulation of Sb2S3 based p-i-n structured planar solar cell using SCAPS-1D software	31
Comparative study of β-cyclodextrin and carboxymethyl-β-cyclodextrin as effective drug delivery systems for oxymetholone: Design, preparation, characterization, phase solubility and in vitro drug rele	30
Applications of nanomaterial technology in biosensing	30
Silver nanoparticles in gas sensing: A comprehensive review of synthesis, mechanisms, performance metrics, and emerging applications	28
Self-powered response in β-In2S3 thin films	25
Adsorption of dimethylaluminum isopropoxide (DMAI) on the Al2O3 surface: A machine-learning potential study	24
The influence of BaTiO3 nanocrystals on the electrical characteristics and energy storage capabilities of BNKT ceramics	24
Tunable magnetic properties of CoPt nanoparticles: Impacts of phase coexistence and thermal annealing	24
Controlling of the single domain wall propagation in magnetic microwires by magnetostatic interaction	21
Investigation of sub-stoichiometric MoOx hole-selective contacts for rear junction passivating contact silicon solar cells	20
Inkjet-printed multilayer structure for low-cost and efficient OLEDs	19
Decorated of silver nanoparticles over Arabic gum modified magnetic nanoparticles: Evaluation of its antioxidant and its therapeutic effects on cervical cancer	19
Green synthesis of pH-sensitive magnetic bio-nanocomposite hydrogel based on galactomannan and sodium alginate for targeted colorectal cancer drug delivery	18
Magnetically controlled bidirectional 2×2 elastic switch using Terfenol-D in a phononic crystal-based Mach-Zehnder interferometer	18
Effect of substrate inclination angle on the evaporation-induced self-assembly of CsPbBr3 thin films	18
A novel Ga2O3-doped ZnO decorated SWCNT nanocomposite based amperometric sensor for efficient detection of dopamine in real samples	17

Design and fabrication of dust removal nanoarray structure on the surface of solar cell glass cover	16
Simultaneous determination of chloramphenicol and tinidazole by electrochemical analysis using MnO2/electrochemically reduced graphene oxide modified electrode	16
Subthreshold and reverse bias model of graphene/p-type silicon Schottky diodes	15
Solution-combustion synthesized highly luminescent CaTiO3:Gd2O3:Eu3+ perovskite nanophosphors for WLED applications	15
Dendrite suppression with zirconium (IV) based metal–organic frameworks modified glass microfiber separator for ultralong-life rechargeable zinc-ion batteries	15
Enhanced SERS performance of gold nanoparticle assemblies on a cysteine-mutant Tobacco mosaic virus scaffold	15
Enhancement in the optoelectronic and thermoelectric properties of the NaASb (A= Ca, Sr and Ba) Sodium Antimonides via switching from P4/nmm to P62 m symmetry	15
Advanced oxidation processes over Fe doped Bi2WO6 photocatalysts toward rhodamine B and cefalexin treatment	14
Iron oxide nanoparticles enhancing magnetic resonance imaging: A review of the latest advancements	14
Developing G-T-B glass system doped holmium oxide for radiation absorption and optical applications	14
Advancing perovskite solar cells: Optical characterization and performance enhancement via spectroscopic ellipsometry	13
Photoelectrodeposition of Ag3PO4 nanoparticles on BiVO4 photoanode for enhancing its photoelectrochemical water oxidation performance	13
Flexible wearable optical wireless sensing system for fruit monitoring	13
Highly sensitive and stable conductive elastomer composites for strain monitoring of seismic isolation bearings: Experiment and molecular simulation	13
Controlling the domain wall dynamics in Co-rich magnetic microwires with graded magnetic anisotropy	13
Recent advances on supercapacitor electrode materials from biowastes- a review	13
The influence of measuring current on the calculation of anisotropic magnetoresistance in magnetic nanostructures	13
Novel pyrochlores in the Bi2O3–MgO–Ta2O5 (BMT) system: Synthesis optimisation, phase equilibria and dielectric properties	12
Enhancing the performance of Bi2O3–ZnO semiconductor bilayers for photoelectrochemical electrodes by strategically engineering oxygen vacancies	12
Exploring the temperature dependence of magnetic properties and magnetoimpedance effect in Co-rich microwires	12
XPS analysis, structural, physical and radiation shielding performance of innovative lead-free boro-tellurite glasses: A comprehensive experimental study	12
2-Deoxy-d-glucose functionalized zinc oxide nanodrug for kidney cancer treatment	12
Enhanced sodium alginate-Based active packaging films via sonication, CaCl2 crosslinking, and patchouli essential oil incorporation	11
Q-dependent electron-phonon coupling induced phonon softening and non-conventional critical behavior in the CDW superconductor LaPt2Si2	11
Surface plasmon resonance sensor with photodiode integrated beneath plasmonic layer	11
Harnessing sustainable N-doped activated carbon from walnut shells for advanced all-solid-state supercapacitors and targeted Rhodamine B dye adsorption	11
Triangular BiVO4-Bi2O3 ultrathin sheet composites for enhancement of photoelectrochemical and photocatalytic performance	10
Enhancing microstructure, nanomechanical and anti-wear characteristics of spark plasma sintered Ti6Al4V alloy via nickel-silicon carbide addition	10
Platelet-rich plasma as an ideal biomaterial for improving pregnancy of infertility mice	10
Customized and high-performing acoustic levitators for contact-free experiments	10
Expanding the applications of the wear-resistant titanium aluminum nitride thin-film to include temperature sensing	10
Industrially compatible production of customizable honeycomb-patterned poly(vinyl chloride) using food-wrapping waste for power-boosting triboelectric nanogenerator and ocean wave energy harvester	10
Active carbon derived from rice husk as sustainable substitutes for costly platinum electrodes in dye-sensitized solar cells	10
A ROS balance system with medication and photothermal therapy ability for burn treatment	10
Enhanced electron transfer due to rGO makes Ag–CaTiO3@rGO a promising plasmonic photocatalyst	9
Miniaturized multisensor system with a thermal gradient: Performance beyond the calibration range	9
Electrocatalytic carbon dioxide reduction microchanneled with nanostructured electrodes	9
A polyamide-facilitated soldering approach for Mini LED precise alignment leveraging 3D interfacial networks	9
Friction for flexible pressure sensors and arrays on polymers	9
Design optimization of a phase-change capacitive sensor for irreversible temperature threshold monitoring and its eco-friendly and wireless implementation	9
Impedance tracking control of magnetostrictive transducer based on variable stiffness tuning	9
Evaluating the practical magnetic properties of permanent magnets in multi-source magnetic devices via cross-scale micromagnetic simulation method	9
Mechanical properties and corrosion behavior of electron beam cold hearth melting high strength and high corrosion resistant Ti-0.3Mo-0.8Ni alloy with different states	8
Nickel/ceria nanorod catalysts for the synthesis of substitute natural gas from CO2: Effect of active phase loading and synthesis condition	8
Foam-like Ce–Fe–O-based nanocomposites as catalytic platforms for efficient hydrogen oxidation in air	8
The flow stress prediction of TiB2/2024 aluminum matrix composites based on modified Arrhenius model and gene expression programming model	8
Enhanced photovoltage production from Canna dyes with surface passivation of ZnO based dye sensitized solar cells	8
Textile-based heating system for safe localized warts treatment	8
Development and analysis of flexible Mn–Co ferrite material incorporating dual-Rectangular nested resonator (DRNR) for enhanced oil impurity sensing	8
Fabrication and characterization of Mn-doped 45S5 bioglass coatings for Ti6Al4V implants	8

Eco-friendly synthesis of magnetic ZnO/Fe3O4 nanocomposites: Structural, morphological, antimicrobial, and anticancer evaluation	8
Effect of the modified hybrid particle on the corrosion inhibition performance of polyolefin based coatings for carbon steel	8
Impact of high BaO content on tuning the structural, optical and radiation shielding properties of multicomponent borate glasses	8
Preparation and anti-tumor effect in hepatocellular carcinoma treatment of AS1411 aptamer-targeted polyphyllin II-loaded PLGA nanoparticles	8
Biofunctional approaches of wool-based keratin for tissue engineering	8
In-situ polymerized siloxane urea enhanced graphene-based super-fast, durable, all-weather elec-photo-thermal anti-/de-icing coating	8
Superconductive and flexible antenna based on a tri-nanocomposite of graphene nanoplatelets, silver, and copper for wearable electronic devices	8
Electrical conductivity based ammonia, methanol and acetone vapour sensing studies on newly synthesized polythiophene/molybdenum oxide nanocomposite	8
Flexible battery-free wireless electronic system for food monitoring	8
Optical band gap reduction of polyethylene oxide through black iron (III) oxide nanoparticles insertion: Structural, magnetic, morphological and optical properties	7
Single-preparation rGO/Cu–Cu2O nanocomposite-modified electrode integrating NaOH immobilized polymer blend film for one-step nonenzymatic glucose detection	7
Eco-friendly synthesis of hydrotalcite-Ag nanosheets using Areca catechu L. nut extract and its antibacterial activity	7
Manganese-doped polyaniline electrodes as high-performance supercapacitors with superior energy density and prolonged shelf life	7
Bismuth telluride based efficient thermoelectric power generator with electrically conducive interfaces for harvesting low-temperature heat	7
Enhancing the open-circuit voltage in narrow-bandgap CuInSe2 solar cells via local contact passivation with Al2O3	7
Potential plasma facing materials: A case study on CeB6 particulate reinforced W–1Ni matrix composites produced via different sintering techniques	7
A novel stearic acid/expanded graphite/Fe3O4 composite phase change material with effective photo/electro/magneto-triggered thermal conversion and storage for thermotherapy applications	7
Multifunctional prospects of physical vapor-deposited silver-based metal-dielectric nanocomposite thin films	7
Gas phase alloyed crystalline S–Se dielectrics with high ionic mobility	7
The improvement of the shape memory effect of Cu-13.5Al–4Ni high-temperature shape memory alloys through Cr-, Mo-, or V-alloying	7
Metal Organic Framework based Humidity Sensing: Stability, performance, and IoT Integration	6
Excellent piezoresistivity of composites made from networked carbon nanotubes and polydimethylsiloxane: An intertube barrier driven strain sensing	6
The green formulation of silver nanoparticles for the anticancer and lupus nephritis treatment applications and reducing the inflammatory cytokines in the rat periodontal model	6
Coordination of H2O2 on praseodymia nanorods and its application in sensing cholesterol	6
Exploring optimal TMDC multi-channel GAA-FET architectures at sub-1nm nodes	6
Cr2O3-graphene nanocomposites for high-performance supercapacitors and methylene blue degradation: Synthesis and electrochemical analysis	6
Fe2B magnetic nanoparticles: Synthesis, optimization and cytotoxicity for potential biomedical applications	6
Explorations of mechanical and corrosion resistance properties of AA6063/TiB2/Cr2O3 hybrid composites produced by stir casting	6
Assessment of alkali and alkaline earth metals doped cubanes as high-performance nonlinear optical materials by first-principles study	6
Urea-mediated synthesized carbon quantum dots to tune the electrochemical performance of polyaniline nanorods for supercapacitor device	6
Pt/ZnO and Pt/few-layer graphene/ZnO Schottky devices with Al ohmic contacts using Atlas simulation and machine learning	6
Photocatalytic, shielding and cytotoxic properties of reduced graphene oxide and barium ferrite nanocomposite synthesized via green combustion method	6
Effect of rare earth Ce on the microstructure and mechanical properties of cast Al–7Si alloys	6
Room-temperature synthesized CsPbI3 nanocrystals for liquid luminescent antennas in visible light communication	6
Microcapsules of n-dodecanoic acid/melamine-formaldehyde with enhanced thermal energy storage capability for solar applications	6
Development of continuous fiber reinforced polymer composites using in-situ co-extrusion towpreg material extrusion process with optimized cooling and evaluation of their mechanical performance and qu	5
Magnetic interaction effects in Fe3O4@CoFe2O4 core/shell nanoparticles	5
Rational synthesis of red carbon dots with ultra-narrow bandwidth emission for precise live cell imaging	5
Ephedra extract-mediated gold nanoparticles on Kaolin: A natural approach for reduction and stabilization, with evaluation of antioxidant and anti-ovarian cancer activities	5
Low power multilevel resistive switching in titanium oxide-based RRAM devices by interface engineering	5
Molecular engineering optimized carbon nitride photocatalyst for CO2 reduction to solar fuels	5
Magnetic and pH-Sensitive dual actuation of biohybrid microswimmer of targeted drug release suitable for cancer cell microenvironment	5
A convenient lanthanide metal–organic framework based visual fluorescence paper microsensor and logic device for triazophos	5
Esterification of 1-hexene and acetic acid using resin-supported phosphotungstic acid catalysts	5
Synergistic A-site co-doping of (Na1/2Bi1/2)xBa1−xZn1/3Nb2/3O3 perovskites: doping mechanisms, microstructure and impedance studies	5
Energy collection generator based on electrostatic conversion mechanism	5
Probing the potential of surface-engineered titanium filler membranes for produced water treatment	5
Efficient adsorption of organic dyes using Fe3O4/carbon sphere nanocomposites: Synthesis and performance evaluation	5
A novel Co, O co-doped Ag2S bimetallic oxysulfide catalyst for efficiently catalytic reduction of 4-nitrophenol and organic dyes	5
Albumin: Source, preparation, determination, applications, and prospects	5
Enhanced dual function of Ag nanoparticles decorated one-dimensional polymorphic TiO2 composites for sustainable environmental applications	5
The preparation of phosphor-in-glass from borosilicate waste glasses by microwave-heating method	5
Efficient dual-imaging platform: Ultrasound-driven synthesis of bismuth–iron oxide nanocomposites	5
Cisplatin loaded polycaprolactone – Zeolite nanocomposite scaffolds for bone cancer treatment	5
Structural, morphological, optical and electrical properties of ferrite-based nanoparticles synthesized flexible substrate for chemical sensing application	5
Micrometric thermal electronic nose able to detect and quantify individual gases in a mixture	5
Hybrid nanogenerator for self-powered object recognition	5
Can ZrAlN thin films be used as thermistor sensors for temperature assessment?	5
Recent advances and new research trends in Sb2S3 thin film based solar cells	5
Green formulation of iron nanoparticles by Panicum repens extract for the treatment of gestational diabetes and hepatotoxicity by following the biochemical and stereological parameters	5
Microstructure, martensitic transformation and excellent shape memory effect of Ga-alloyed Cu–Al–Mn–Fe shape-memory single crystal	5
Unravelling the monomer molar ratio modulation of the optoelectronics of Poly(propylene imine) tetra(thiophen-2-ylmethylene-amine)-co-poly(3-hexylthiophene-2,5-diyl) copolymer	5