Journal of Science-Advanced Materials and Devices

Papers
(The median citation count of Journal of Science-Advanced Materials and Devices is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Enhancing the open-circuit voltage in narrow-bandgap CuInSe2 solar cells via local contact passivation with Al2O368
Design and analysis of quasi-vertical multi-fin GaN power devices based on epitaxially grown GaN-on-sapphire51
Integrated lateral flow immunoassays using trimethylsilyl cellulose barriers for the enhanced sensitivity of COVID-19 diagnosis51
Design, characterization, and electromagnetic performance of a flexible wideband RF antenna using composite materials50
Nanoarchitectured composite of polysulfone and carbon-based fillers bearing magnetically stimulable function for efficient CO2 capture49
Fabrication and wetting characteristics of copper thin film: An active layer for SPR-based sensor applications49
Table of Contents41
ZnO coral-like nanoplates decorated with Pd nanoparticles for enhanced VOC gas sensing34
Engineered gelatin-based conductive hydrogels for flexible wearable electronic devices: Fundamentals and recent advances33
Editorial Board32
A novel fabrication of organic-inorganic hybridized Graphene-La2CrFeW6 nanocomposite and its improved photovoltaic performance in DSSCs28
Functional metal–organic framework nanoparticles loaded with polyphyllin I for targeted tumor therapy26
New design of a commercial chip-based GMR sensor with magnetite nanoparticles for biosensing applications26
Exploring modified cyclodextrins for enhanced encapsulation and release of ethinyl estradiol: Physicochemical characterization and kinetic modeling25
Harnessing Z-scheme charge transfer in ultrathin C N /TiO2@Ti C Cl MXene nanosheets for sustainable water purification, hydrogen evolution, and biocompatibility25
Jute cellulose nanocrystal/poly(N,N-dimethylacrylamide-co-3-methacryloxypropyltrimethoxysilane) hybrid hydrogels for removing methylene blue dye from aqueous solution24
Effect of Al doping on photoluminescence and conductivity of 1D CdS nanobelts synthesized by CVD for optoelectronic applications24
Carbon-based radar absorbing materials: A critical review22
Correlations between structure and photoluminescence properties in N-doped carbon nanoparticles20
Eco-friendly synthesis of hydrotalcite-Ag nanosheets using Areca catechu L. nut extract and its antibacterial activity20
Simple synthesis and characterization of novel polyvinyl alcohol capped sodium selenite solid composite film (PVA: NaSe SCF) samples20
Electronic transport, ionic activation energy and trapping phenomena in a polymer-hybrid halide perovskite composite19
Spin-phonon interaction in nanocrystalline Dy3Fe5O12 probed by Raman spectroscopy: Effects of magnetic ordering19
In-line monitoring of magnetic nanoparticles synthesis using reactor integrated on-chip magnetometer19
Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges18
Pt/ZnO and Pt/few-layer graphene/ZnO Schottky devices with Al ohmic contacts using Atlas simulation and machine learning17
The trends in wound management: Sensing, therapeutic treatment, and “theranostics”17
Development of a lightweight carbon fiber reinforced plastic water tank for fire trucks17
A comparative simulation study of light–matter coupling in 1D photonic crystals with 2D perovskite active layer16
Harnessing ambient sound: Different approaches to acoustic energy harvesting using triboelectric nanogenerators16
Potential plasma facing materials: A case study on CeB6 particulate reinforced W–1Ni matrix composites produced via different sintering techniques16
Effect of hydrogen-bonding networks in water on the proton conductivity properties of metal–organic frameworks16
Bismuth telluride based efficient thermoelectric power generator with electrically conducive interfaces for harvesting low-temperature heat16
Power enhancement of vibration energy harvesters by way of magnetic flux gradient analysis of electromagnetic induction15
Remote magnetic-field-actuated helical spring magnets: Micromagnetic simulation and analytical modeling14
Ultrashort-term dual ultraviolet-irradiated nickel-doped titanium dioxide nanoparticle mesh for photocatalytic disinfection with minimum exposure risk to human health14
Efficacy of mesoporous TiO2–ZrO2@g-C3N4 produced using a simple ultrasonic approach for copper ion removal from wastewater14
Manganese-doped polyaniline electrodes as high-performance supercapacitors with superior energy density and prolonged shelf life14
TCO-free perovskite solar cells in taking advantage of SWCNT/TiO2 core/shell sponge13
Proanthocyanidin-Imbued cellulosic 3-Dimensional intrinsic aligned Nanostructures: A novel approach for dental and bone regeneration using dental pulp derived stem cells13
Unveiling the potential of decorating tunable morphology of bismuth sulfide nanostructures on the Bi2WO6 nanosheets for enhanced photoelectrochemical performance12
PVA/gelatin hydrogel loaded with propolis for the treatment of myocardial infarction12
Electrospun bimetallic Au–Pt/TiO2/BaFe12O19 nanofibers as promising photocatalysts driven by visible light: Synthesis and characterization12
Broadband mid-infrared thermal emission with large degree of circular polarization enabled by symmetry-broken metasurfaces12
Gas phase alloyed crystalline S–Se dielectrics with high ionic mobility12
Heparinization of the bovine pericardial scaffold by layer-by-layer (LBL) assembly technique12
Comparative study on the influence of transparent glass substrates for antimony telluride thin films via structural and optical properties11
Printing of passive RFID tag antennas on flexible substrates for long read distance applications: Materials and techniques11
The improvement of the shape memory effect of Cu-13.5Al–4Ni high-temperature shape memory alloys through Cr-, Mo-, or V-alloying11
Single-preparation rGO/Cu–Cu2O nanocomposite-modified electrode integrating NaOH immobilized polymer blend film for one-step nonenzymatic glucose detection11
A study on the manufacture of CNT composites bipolar plate for the fuel cell using a nanosecond pulsed laser10
Surface engineering for enhanced wicking: The role of laser machining and surface roughness10
Surface modified carbon nanotubes fiber as flexible bifunctional electrocatalyst for overall electrochemical water splitting reactions10
Development of a new immunochromatographic strip mediated by colloidal Gold-MAb nanoparticles for rapid detection of subgroup K Avian leukemia virus10
A novel stearic acid/expanded graphite/Fe3O4 composite phase change material with effective photo/electro/magneto-triggered thermal conversion and storage for thermotherapy applications10
Innovative device for in-vivo quantitative assessment of different wire materials using 3D models10
Modulating the electrocatalytic reduction of CO2 to CO via surface reconstruction of ZnO nanoshapes9
Deviceful LiCl salt hydrate confinement into a macroporous silicone foam for low-temperature heat storage application9
Face-to-face order-packed mode promotes thermally activated delayed fluorescence to achieve stronger aggregation-induced emission9
Visible light-driven Synergetic antimicrobial activity of Cu2O quantum dots and electrospun PAN/PCL nanofiber matrix9
Effect of surface tension and drying time on inkjet-printed PEDOT:PSS for ITO-free OLED devices9
Phase stability of MoTe2 obtained by tellurization of sputtered molybdenum oxide: The influence of the thickness and the precursor crystallinity9
Comparative study of β-cyclodextrin and carboxymethyl-β-cyclodextrin as effective drug delivery systems for oxymetholone: Design, preparation, characterization, phase solubility and in vitro drug rele9
Recent developments in advanced polymeric materials for solder mask application: Progress and challenges9
Improving tribocorrosion resistance of a medical grade CoCrMo alloy by the novel HIPIMS nitriding technique9
Applications of nanomaterial technology in biosensing8
Anticancer Efficacy of Arnica Montana Extract-Loaded Chitosan Submicron Particles in Human Myeloid Leukemia Cell Lines: Insights from a 3D Composite Model8
Controlled growth of TiO2 nanoparticles on graphene by hydrothermal method for visible-light photocatalysis8
Constructing conductive and mechanical strength self-healing hydrogel for flexible sensor8
Recent mechanical processing techniques of two-dimensional layered materials: A review8
AlCrO3-grafted g-C3N4 composite for cadmium ions removal: A paradigm shift in environmental remediation8
Ultrahigh responsive negative photoconductivity photodetector based on multilayer graphene/InSe van der Waals heterostructure8
Recent development in silver-based ink for flexible electronics8
Eco-friendly synthesis, characterization, catalytic, antibacterial, antidiabetic, and antioxidant activities of Embelia robusta seeds extract stabilized AgNPs7
Photocatalytic, shielding and cytotoxic properties of reduced graphene oxide and barium ferrite nanocomposite synthesized via green combustion method7
Magnetic field sensing characteristics of rGO/BiMnO3 nanocomposites loaded clad-modified optical fiber sensor7
Efficient oxidation of benzyl alcohol on copper phyllosilicate catalysts7
Design and numerical simulation of Sb2S3 based p-i-n structured planar solar cell using SCAPS-1D software7
Novel microfluidic approaches to circulating tumor cell separation and sorting of blood cells: A review7
An assistive characterized method for growth morphology and orientation of dendrites based on 3D reconstruction technique7
CPP10-targeted photoactivatable MOF nanosystem for combined photodynamic Therapy−Chemotherapy of cancer7
Coordination of H2O2 on praseodymia nanorods and its application in sensing cholesterol7
Control of magnetic vortex states in FeGa microdisks: Experiments and micromagnetics7
Design and fabrication of dust removal nanoarray structure on the surface of solar cell glass cover6
Highly conducting ionic liquid doped polymer electrolyte for energy storage applications6
Microwave-assisted synthesis of nitrogen-doped pineapple leaf fiber-derived activated carbon with manganese dioxide nanofibers for high-performance coin- and pouch-cell supercapacitors6
Urea-mediated synthesized carbon quantum dots to tune the electrochemical performance of polyaniline nanorods for supercapacitor device6
Table of Contents6
Investigation of sub-stoichiometric MoOx hole-selective contacts for rear junction passivating contact silicon solar cells6
Manganese dioxide coupled with hollow carbon nanofiber toward high-performance electrochemical supercapacitive electrode materials6
Enhanced magnetocaloric performance in nanocrystalline/amorphous Gd3Ni/Gd65Ni35 composite microwires6
Fe2B magnetic nanoparticles: Synthesis, optimization and cytotoxicity for potential biomedical applications6
Decorated of silver nanoparticles over Arabic gum modified magnetic nanoparticles: Evaluation of its antioxidant and its therapeutic effects on cervical cancer6
Hotspot-type silver-polymers grafted nanocellulose paper with analyte enrichment as flexible plasmonic sensors for highly sensitive SERS sensing6
Exceptional photodecomposition activity of heterostructure NiTiO3–TiO2 catalyst6
Controlling of the single domain wall propagation in magnetic microwires by magnetostatic interaction6
Effect of carbazole coating on TiO2 nanoparticles as a photosensitizer and MWCNTs on the performance of epoxy composites5
An ultrahigh selective uric acid sensor based on SrWO4 nanocomposite using pomelo leaf extract solubilized Nafion modified glassy carbon electrode5
Simultaneous determination of chloramphenicol and tinidazole by electrochemical analysis using MnO2/electrochemically reduced graphene oxide modified electrode5
Photothermal impacts induced by laser pulse in a 2D semiconducting medium with temperature-dependent properties under strain–temperature rate-dependent theory5
Solid-state crystallization, oxygen-vacancy rich mesopores and stable triad-silanol nests in ZSM-5 catalyst induced by electron-beam irradiation and calcination5
A novel Ga2O3-doped ZnO decorated SWCNT nanocomposite based amperometric sensor for efficient detection of dopamine in real samples5
Excellent piezoresistivity of composites made from networked carbon nanotubes and polydimethylsiloxane: An intertube barrier driven strain sensing5
Fluorescent carbon dots for highly sensitive bilirubin sensing with excellent selectivity5
Chirality-dependent energy induced by spin-orbit torque-driven artificial spin texture5
Metallic meta-biomaterials: A critical review of fatigue behaviors5
Colorimetric copper (Ⅱ) ions detection in aqueous solution based on the system of 3′3′5′5′-tetramethylbenzidine and AgNPs in the presence of Na2S2O35
Assessment of alkali and alkaline earth metals doped cubanes as high-performance nonlinear optical materials by first-principles study5
Differential carbonization-shrinkage induced hierarchically rough PAN/PDMS nanofiber composite membrane for robust multimodal superhydrophobic applications5
Adsorption of dimethylaluminum isopropoxide (DMAI) on the Al2O3 surface: A machine-learning potential study5
A six-mode optical thermometry rooted from the distinct thermal behavior of SrLaLiTeO6: Mn4+, Eu3+ double perovskites and their potential application in wavelength detection5
Microwave-assisted facile synthesis of graphitic-C3N4/reduced graphene oxide/MoS2 composite as the bifunctional electrocatalyst for electrochemical water splitting4
Table of Contents4
Effect of rare earth Ce on the microstructure and mechanical properties of cast Al–7Si alloys4
Selective and sensitive chemiresistive sensors based on polyaniline/graphene oxide nanocomposite: A cost-effective approach4
Effect of an agglomeration-suppressed metal island buffer layer on nanostructure of FePt-oxide granular films for heat assisted magnetic recording media4
Effect of graphite, graphene oxide, and multi-walled carbon nanotubes on the physicochemical characteristics and biocompatibility of chitosan/hyaluronic acid/hydroxyapatite scaffolds for tissue engine4
Structural, photocatalytic and electrochemical studies on facile combustion synthesized low-cost nano chromium (III) doped polycrystalline magnesium aluminate spinels4
Self-powered response in β-In2S3 thin films4
63Ni-based radioluminescent isotope cells with enhanced photon transport interfaces4
Investigating the effect of Zr content on electrochemical and tribological properties of newly developed near β-type Ti-alloys (Ti–25Nb-xZr) for biomedical applications4
Advances in neoteric modular tissue engineering strategies for regenerative dentistry4
Boosting charge-transfer kinetics and cyclic stability of complementary WO3–NiO electrochromic devices via SnOx interfacial layer4
Synergistic strengthening and toughening of 3D printing photosensitive resin by bismaleimide and acrylic liquid-crystal resin4
Zinc oxide thin film transistor with high UV photoelectric sensitivity for artificial neuro networks4
Polybutadiene polyurethane acrylate photosensitive resin and its application in 3D printing4
Heterostructure of TiO2 and macroporous silicon: The simplest relaxation oscillator4
Inkjet-printed multilayer structure for low-cost and efficient OLEDs4
Effect of Triton X-100 surfactant concentration on the wettability of polyethylene-based separators used in supercapacitors4
Explorations of mechanical and corrosion resistance properties of AA6063/TiB2/Cr2O3 hybrid composites produced by stir casting4
Effect of substrate inclination angle on the evaporation-induced self-assembly of CsPbBr3 thin films4
Tunable magnetic properties of CoPt nanoparticles: Impacts of phase coexistence and thermal annealing4
Low-temperature co-fired PZNN-PZT multilayer piezoelectric ceramics with excellent electrical and bending properties4
Facile fabrication of Z-scheme Ag2WO4/BiOBr heterostructure with oxygen vacancies for improved visible-light photocatalytic performance3
Quantitative detection of Staphylococcus aureus using aptamer-based bioassay coupled with porous Si SERS platform3
Orange-red emitting praseodymium doped yttrium-molybdate nanophosphors for multifunctional applications3
Microcapsules of n-dodecanoic acid/melamine-formaldehyde with enhanced thermal energy storage capability for solar applications3
NdCoO3 nanostructures as promising candidate photocatalysts for boosting visible-light-driven photocatalytic degradation of organic pollutants3
Cracking prediction at solid-tooth support interface during laser powder bed fusion additive manufacturing3
Construction of broad-spectrum photocatalyst films through interface engineering: Orchestrating Bi nanoparticles in TiO2/BiVO4 Z-scheme heterojunctions3
Large-scale fabrication of nanofibers by tiny-needle-spaced electrostatic-induction-assisted solution blowing spinning3
Tuning of magnetic properties and giant magnetoimpedance effect in multilayered microwires3
A hierarchical porous aerogel nanocomposite of graphene/NiCo2S4 as an active electrode material for supercapacitors3
A novel Co, O co-doped Ag2S bimetallic oxysulfide catalyst for efficiently catalytic reduction of 4-nitrophenol and organic dyes3
Chitosan-derived carbon aerogel nanocomposite as an active electrode material for high-performance supercapacitors3
Low power multilevel resistive switching in titanium oxide-based RRAM devices by interface engineering3
Facile fabrication of g-C3N4/CdS heterojunctions with enhanced visible-light photocatalytic degradation performances3
Superior organic dye removal by CoCr2O4 nanoparticles: Adsorption kinetics and isotherm3
Graphene non-covalently functionalized with Gallic acid (Ga) as high performance electrode material for supercapacitors3
Micrometric thermal electronic nose able to detect and quantify individual gases in a mixture3
Machine learning investigation to predict the relationship between photoluminescence and crystalline properties of blue phosphor Ba0.9-xSrxMgAl10O17:Eu2+3
Albumin: Source, preparation, determination, applications, and prospects3
Evaluation of human amnion denuded derived mesenchymal stem cell on 3D porous hydroxyapatite composite scaffolds for osteogenic differentiation: Prolonged in vitro study3
An integrated microfluidic concentration gradient generator for mechanical stimulation and drug delivery3
In situ synthesis of hybrid zinc oxide-silver nanoparticle arrays as a powerful active platform for surface-enhanced Raman scattering detection3
Tuning rotational magnetization for high frequency magnetoimpedance in micro-patterned triangle spiral magnetic systems3
From aluminum foil to personalized medicine: Ecofriendly one-step electrode modification for rapid detection of ertapenem and co-administered medications3
Printed graphene and hybrid conductive inks for flexible, stretchable, and wearable electronics: Progress, opportunities, and challenges3
The green formulation of silver nanoparticles for the anticancer and lupus nephritis treatment applications and reducing the inflammatory cytokines in the rat periodontal model3
Assessment of cobalt substitution on the structural, physico-mechanical, and in vitro degradation of akermanite ceramic3
Recent progress in multifunctional hydrogel-based supercapacitors3
Exploring the deposition pathway in the notch region of double-graded bandgap ACIGS solar cells3
Ultrasound assisted green synthesis of silver nanoparticles stabilized by chitosan polymers: Investigation of its therapeutic application in diarrhea3
Low-grade heat recycling of vertical thermoelectric cells based on thermal-induced electric double layer3
Morphological, optical, and electrical properties of CoxCa(0.90-x)Ni0.10Fe2O4 based flexible metamaterial substrate for industrial chemical contamination sensing3
Enhanced SERS performance of gold nanoparticle assemblies on a cysteine-mutant Tobacco mosaic virus scaffold3
Advanced collagen nanofibers-based functional bio-composites for high-value utilization of leather: A review3
Molecular engineering optimized carbon nitride photocatalyst for CO2 reduction to solar fuels2
Hybrid piezoelectric-triboelectric nanogenerators for flexible electronics: Recent advances and perspectives2
Ti-doped Bi2(O,S)3 bimetal oxysulfide for highly efficient catalytic reduction of organic dyes and heavy metal pollutants in the dark2
Effects of glutaric anhydride functionalization on filler-free benzoxazine/epoxy copolymers with shape memory and self-healing properties under near-infrared light actuation2
Synthesis of GN/ MnO2 nanocomposite materials for photo-assisted supercapacitor with enhanced capacities2
Novel beeswax-chitosan/Zinc-hydroxyapatite biocomposite porous scaffolds: Preparation and biological evaluation2
Energy collection generator based on electrostatic conversion mechanism2
Facile and rapid synthesis of solar-driven TiO2/g-C3N4 heterostructure photocatalysts for enhanced photocatalytic activity2
The atomic and electronic structure of Hf0.5Zr0.5O2 and Hf0.5Zr0.5O2:La films2
Valorization of fish and shrimp wastes to nano-hydroxyapatite/chitosan biocomposite for wastewater treatment2
High-mobility sputtered F-doped ZnO films as good-performance transparent-electrode layers2
Soft actuators built from cellulose paper: A review on actuation, material, fabrication, and applications2
Improvement of organic solar cell performance by multiple plasmonic excitations using mixed-silver nanoprisms2
Photoelectrodeposition of Ag3PO4 nanoparticles on BiVO4 photoanode for enhancing its photoelectrochemical water oxidation performance2
Fabrication of flexible micro-supercapacitors based on low-oxidized graphene/polyaniline/porous carbon ternary composites with high area capacitance2
Red emissive N–S co-doped carbon dots for live imaging of tumor spheroid in the microfluidic device2
Bilayer and clickable electrospun membrane from tailored polyurethanes: a versatile platform for easy surface functionalization.2
Enhancement in the optoelectronic and thermoelectric properties of the NaASb (A= Ca, Sr and Ba) Sodium Antimonides via switching from P4/nmm to P62 m symmetry2
Efficient adsorption of organic dyes using Fe3O4/carbon sphere nanocomposites: synthesis and performance evaluation2
Synergistic effects of dimethyl sulfoxide-treatment and aramid nanofiber addition on performance enhancement of the PEDOT: PSS-based supercapacitor2
Recent advances and new research trends in Sb2S3 thin film based solar cells2
Silver nanoparticles stabilized by chitosan-polyvinyl alcohol polymers mediated by Pistacia extract for treatment of functional dyspepsia and gastric cancer2
Synergy of indium doping and hydrogenation for good-performance and high-mobility ZnO electrode films2
Fabrication and infusion of potent silver doped nano ZnO aimed to advance germicidal efficacy of health and hygiene products2
Table of Contents2
Transition metal oxide based resistive random-access memory: An overview of materials and device performance enhancement techniques2
Solution-combustion synthesized highly luminescent CaTiO3:Gd2O3:Eu3+ perovskite nanophosphors for WLED applications2
A microfluidic system simulating physiological fluid environment for studying the degradation behaviors of magnesium-based materials2
Self-powered electrochemical wide-band photodetectors using ZrO2@TiO2 nanorod arrays modified with single-walled carbon nanotubes2
Dendrite suppression with zirconium (IV) based metal–organic frameworks modified glass microfiber separator for ultralong-life rechargeable zinc-ion batteries2
In situ synthesis of highly effective nickel nanocatalyst for methane bireforming2
Carbon nanotube-reinforced polymer nanocomposites for sustainable biomedical applications: A review2
Magnetic interaction effects in Fe3O4@CoFe2O4 core/shell nanoparticles2
Hybrid nanogenerator for self-powered object recognition2
Fabrication of in situ crosslinking hydrogels based on oxidized alginate/N,O-carboxymethyl chitosan/β-tricalcium phosphate for bone regeneration2
Wool-coiled bimetallic oxysulfide MoSrOS catalyst synthesis for catalytic reduction of toxic organic pollutants and heavy metal ions2
Structural, morphological, optical and electrical properties of ferrite-based nanoparticles synthesized flexible substrate for chemical sensing application2
Metamaterial with sign-toggling thermal expansivity inspired by Islamic motifs in Spain2
Large-scale bare Cu bonding by 10 μm-sized Cu–Ag composite paste in low temperature low pressure air conditions2
Laccase mediated electrosynthesis of heliotropin on mango-kernel derived carbon nanosphere composite: A sustainable approach2
Biosynthesis of gold nanoparticles mediated by Curcuma longa extract: Evaluation of its catalytic activity for the degradation of environmental pollutants and study of anti-lung adenocarcinoma effects2
Can ZrAlN thin films be used as thermistor sensors for temperature assessment?2
Comparison of laser processability for LiFe2
Sb2Se3/CZTS dual absorber layer based solar cell with 36.32 % efficiency: A numerical simulation2
The formation of strain-induced martensite and its influence on hydrogen compatibility of metastable austenitic stainless steels: A state-of knowledge review2
Impedimetric sensing platform for human papillomavirus and p53 tumor suppressor gene in cervical samples2
Carbon nanohorns with surface functionalized by plasma treatment and their applications in drug delivery systems2
Hydrothermal synthesis of titanium dioxide/graphene aerogel for photodegradation of methylene blue in aqueous solution2
0.033710956573486