Surfaces and Interfaces

Papers
(The TQCC of Surfaces and Interfaces is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)
ArticleCitations
Editorial Board138
Effect of bottom electrode on rectification performance in pyrene-terminated n-alkanethiolate106
“Intermediate template” assisted assembly growth of transition metal doped 2D porous boron nitride sheet as an efficient adsorbent for CO2 capture104
New polymeric nanocomposite thin films for transparent optoelectronics: Impact of In(acac)3 on the structural, optical and photoelectrical characteristics of PVA films94
Towards decoupling chemical and mechanical adhesion at the electroplated metal/polymer interface via precision surface texturing87
Analysis of impulse withstand voltage of ester-based nanofluids86
How does water of crystallization influence the optical properties, band structure and photocatalytic activity of tungsten oxide?70
Formation of laser-induced periodic surface structures on Zr-based bulk metallic glasses with different chemical composition69
Wetting behavior and interfacial characteristics of Ti33Zr17Cu50 amorphous alloy on AlN65
Influence of Ag+ ions on the physical properties of spray coated CeO2 thin films and photo-response of p-Si/n-SDC junction diodes62
Ag2O doped SnSe: A highly discriminative sensor material for DNA sequencing61
Zinc-manganese bimetallic sulfides anchored on the surface of corn stalk carbon used as the anode of lithium ion batteries59
The stability and geometrical characteristics of solid-liquid interfacial nanobubbles in complex aqueous solution environments58
Enhanced oxygen mobility of Mn-Ce solid solution catalysts for polysaccharide-assisted catalytic oxidation of toluene58
Optimization of thermoelectric power factor in β-Cu2Se thin films through Al doping56
Surface modification of nanofibrous polyethersulfone scaffolds with fluorapatite nanoparticles toward improved stem cell behavior and osteogenic activity in vitro56
Conical porous hollow g-C3N4 charge separation with high efficiency for enhancing visible-light photocatalytic activity55
Modified spinel ferrite–based composite membranes with highly proficient photocatalytic activity53
Research progress of Cu-based and Ce-based catalysts for the selective catalytic reduction of NO with CO52
Insight into the adsorption and co-adsorption of PPCPs on Ti3C2Tx MXene: Behaviors, mechanisms and application potentials51
Enhanced photocatalytic hydrogen evolution of an imine-linked covalent triazine framework through the assistance of Ti3C2Tx48
Bioinspired low temperature Cu bonding interfaces with interlocked microstructures to achieve high reliability46
Effect of milling atmosphere on stability and surface properties of ZnO/vermiculite hybrid nanocomposite powders45
Engineering S-scheme heterojunction MgO/WO3-integrated Graphene photocatalyst for robust detoxification of tetracycline: Mechanistic insight and actual matrix remediation44
Engineered design of MnFe2O4/CoNiFe-LTH/g-C3N4 heterocatalyst for doxycycline degradation via Fenton oxidation process: Optimization and mechanism44
Efficient antibiotic remediation from wastewater using a lamellar free-standing 2D graphene oxide/Ti3C2Tx hybrid membrane44
Liquid-solid interface diffusion behaviors of furfural in the insulation systems of natural ester-cellulose paper and mineral oil-cellulose paper43
Synthesis and design strategies of codoped titanium dioxide with band alignment and multiple reflections of incident light for efficient visible light activity42
Biomass microcrystalline cellulose based solar evaporator with aligned channels for clean water and electricity co-generation42
Surfactant assisted hydrothermal synthesis of graphene reinforced nanoferrite: A novel nanocomposite for photocatalytic abatement of azo dye41
Mixed halide perovskite compound thin film with large cation guanidinium and applications: MIS (Au/GUAPbI3-xClx/p-Si/Al) and p-FET (Al/p-Si/SiO2/GUAPbI3-xClx/Al)41
In-situ interface engineering of NVOPF nanosheets with cross-linked conductive networks for superior sodium storage41
Large-scale, transferable and double-sided metasurface absorber for the visible to near-infrared spectrum41
Lithium and potassium decorated naphthylene for high capacity hydrogen storage by DFT and GCMC study40
Dual trace detection of hazardous substances by aptamer-functionalized gold nanofilms based on surface-enhanced Raman spectroscopy40
Gold nanocage-carbon nanodot composites activate ornidazole against biofilm infections through modulating the hypoxic microenvironment40
Mitigation of cavitation erosion using laser-induced periodic surface structures40
Influence of different metal-modified Beta zeolites on the liquid-phase isomerisation of xylene and reaction mechanisms38
A hybrid epoxy resin realized by facile glycidyl-grafting of highly-branched polyurethane toward heat-free structural bonding38
Malachite green removal using algal biochar and its composites with kombucha SCOBY: An integrated biosorption and phycoremediation approach38
Facile and scalable preparation of solution-processed succulent-like silver nanoflowers for 3D flexible nanocellulose-based SERS sensors38
Photodetection and photocatalytic properties of Ag2BiI5 thin films formed by iodization of Ag-BiI3 layers37
Surface and electrochemical characteristics of S-scheme nanoheterostructured photocatalysts of AgIO3/Cu2SnS3 with enhanced solar energy driven photocatalytic activity36
XO2 (X=Ti, Zr, and Hf) nanoparticles modified SnS2 nanosheet for detection and scavenging towards NO2 and SO236
Efficient energy storage with Li-ion decorated MoS2@TaS2 van der Waals heterostructure: A High-performance material for advanced storage devices36
Synthesis of amine-functionalized CeFe2O4-biochar for V(Ⅳ) and V(V) adsorption: characterization, mechanism, and regeneration capacity35
Influence of molarity on the structural, optical, photocatalytic and electrochemical properties of CoMn₂O₄ thin films fabricated by spray pyrolysis35
Enhanced diethylamine catalytic degradation performance of HZSM-5 supported copper oxides by Na modification35
Unveiling the uniform copper thickening mechanism of micro through-hole using 4,7,10-trioxa-1,13-tridecanediamine as a novel and single additive in an acidic electroplating bath35
Corrigendum to “Functionalized chalcogenide thin films for early detection of plant diseases via spore detection” [Surfaces and Interfaces 56 (2025) 105508]35
Engineering advanced mesoporous nanomaterials for high performance supercapacitors: A review34
Toward condensing stable water meniscus for Dip-pen nanolithography considering ambient condition, surface wettability, and SPM probe structure34
Graphene oxide/polydopamine interface co-reinforced carbon paper: With comprehensive mechanical properties, electrical conductivity and air permeability34
Editorial Board34
pH-driven morphological control of Pt-Cu nanocrystals for excellent catalytic activity in methanol oxidation reaction34
Facile fabrication of eco-friendly flame retardant and superhydrophobic coatings on cotton fabrics33
Visualization of the impact of fluorocarbon (CFₓ) passivation films and bubble layers on the anode effect33
Enhancing piezocatalytic dye degradation through ball milling-induced polarization in nano bismuth zinc borate33
One pot preparation of CeO2@Alginate composite beads for the catalytic reduction of MB dye: Effect of cerium percentage33
Developing feature-rich electronic and magnetic properties in theβ-As monolayer for spintronic and33
Molecular dynamics simulation of dislocation network formation and tensile properties of graphene/TiAl-layered composites32
Synthesis of LaW/Ag/GNRs nanocomposite: Application as transducer material for the simultaneous nano molar detection of synthetic dyes and as anode material for Li ion batteries32
Structural, physical and optical properties of Bi4.86La1.14O9/PVA thin-film for shielding applications32
Temperature influence on the formation of triangular features superimposed on nanoripples produced by low-energy ion beam32
Green synthesis of nitrogen-doped graphene quantum dots by recycling waste graphite and impact of oxygen adsorption on enhancing photoluminescence32
Preparation of electronic pastes for high-precision screen printing: action mechanisms and synergistic effects of different polymer binders32
Dual-resonance cavity synergy in wood-based composites for high-efficiency electromagnetic interference shielding32
Prediction of two-dimensional AlBrSe monolayer as a highly efficient photocatalytic for water splitting32
Self-nucleation growth of bimetallic niobium tungsten oxide electrodes with delaminated nanostructure for excellent dual-band electrochromic performance32
Scalable self-growth of magnetic Janus microparticles for microplastics degradation31
Flexible switch between photocatalysis and electrocatalysis for CO2RR by stacking mode31
Core-shell nanorods film of p-CuZnS/n-TiO2 with boosting interfacial charge separation for sensitive photoelectrochemical photodetector31
Effect of grain boundary scattering on carrier mobility and thermoelectric properties of tellurium incorporated copper iodide thin films31
Formic acid-assisted electrochemical deposition of CoMo-P on ZIF-67 derived NiCo LDH towards enhanced overall water splitting performance31
One-step extraction of CuCl2 from Cu-Ni mixed electroplating sludge by chlorination-mineralization surface-interface phase change modulation31
Is 3D surface structuring always a prerequisite for effective SERS?31
Comprehensive enhancement of photocatalytic H₂O₂ generation and antibacterial efficacy on carbon nitride through a straightforward polydopamine coating strategy31
Morphologies of Ge (100) surface annealed in nitrogen, forming gas, and vacuum31
HfC HfO2SiO2 nanocomposite ceramic coating formed on TiAlNb medium-entropy alloy by LPDS: Microstructure evolution and ablation behavior31
Defects assisted the enhancement of optical and ferromagnetism in Zn1-xCoxS quantum dots: Toward efficient optoelectronic and spintronic applications30
Neutral salt spray aging effect on low emissivity coating30
Multicolor emitting luminescent MgO nanocubes for implication in ratiometric optical thermometry30
Effect of Ti concentration on the wetting of molten Cu-8.6Zr-xTi alloys on Si3N4 substrate30
Facile synthesis of mesoporous ncCoW powder via electrodeposition; characterization and its efficient application on hydrogen generation and organic pollutants reduction30
Hollow cylindrical ternary ZnO/Co3O4/CuO nanocomposite thick film on inter-digitated electrodes for selective ammonia gas sensing29
Fluorine-doped g-C3N5 quantum dots for detection of heavy metal ions29
Peeling mechanism of interlocked interface between etched acrylonitrile-butadiene-styrene and electroplated metal layer29
Flexible Cu-TA/PVDF composite film for efficient piezo-catalysis and biomolecule detection29
Robust and stable organic sulfonate sodium salt-coated superhydrophilic mesh for ultra-fast gravity-drive oil-water separation29
Silicon dioxide (SiO2) solid blocking layer on through-glass via surface for efficient highly selective copper filling29
Hierarchical mesoporous CuO/ZrO2 nanocomposite photocatalyst for highly stable photoinduced desulfurization of thiophene29
Recent advancement in sensitive detection of carcinoembryonic antigen using nanomaterials based immunosensors29
Cu-ZSM-5 as a regenerable adsorbent for removal of low-concentration methyl mercaptan28
Reinforcing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high-impact polystyrene through ionic crosslinking28
Enhanced photocatalytic activity in RhB dye degradation by Mn and B co-doped mixed phase TiO2 photocatalyst under visible light irradiation28
Enhanced visible-driven photocatalysis in black TiO2 nanosheets with co-exposed {001} and {101} planes28
Enhanced adsorption: Reviewing the potential of reinforcing polymers and hydrogels with nanomaterials for methylene blue dye removal28
Surface wettability of vertical harps for fog collection28
Stable acidic water oxidation by tunable electronic states in β-PbO2 anode electrocatalyst aided by incorporation of various anions and cations28
Au atomic clusters on MoS2 nanosheets for hydrogen evolution reaction28
Electronic bandstructure modulation of MoX2/ZnO(X:S,Se) heterostructure by applying external electric field28
pH-Stimuli responsive DNA/ZIF-8/silica materials with hierarchical porous structure27
Tunable Schottky barrier and contact types in TaX227
Increase in photo sensitivity and detectivity of Bi/Sb35S35Se30 heterostructure films upon time-dependent laser irradiation for photodetection27
Study on the mechanism of the inhibition effect of Pb2+ ion activator concealed beneath its activation action in flotation27
Study on the structural, magnetic, and magnetodielectric properties of M-type BaFe12O19 and SrFe12O19 hexaferrite nanoparticles27
Synthesis of NH2-functionalized cross-linked polymer hydrogel and investigation of its adsorption properties: Effective adsorption of Congo red and Methyl orange and separation of Methylene blue27
Efficient removal of phthalic acid esters from water using nanofiltration membranes: Adsorption mechanisms and hydraulic factors27
Magneto-electric properties of (1-x)LaFeO3 - (x)MnFe2O4 based hybrid nanocomposites for advanced technological applications27
Fabrication of large-area uniform silicon nanohole arrays with high aspect ratio by ultrasound-enhanced metal-assisted chemical etching27
Substituent-dependent circularly polarized luminescence in supramolecular gels based on phenylalanine derivatives27
Adsorption of toxic and harmful gas CO on TM (Ni, Pd, Pt) doped MoTe2 monolayer: A DFT study26
Low acidic SnO2 precursor for efficient flexible perovskite solar cells26
Entropy-stabilized spinel oxide cathode with cationic disorder for high-performance intermediate-temperature solid oxide fuel cells26
The enhanced photocatalytic HER activity of in-situ reduced CoB/GCN-NS composite with a cobalt interlayer as electron transport layer26
Facile-fabrication intelligent surfaces via spin-coating with azobenzene-containing polymer for hydrogen fluoride visual sensor26
Tackling microbial adhesion to surfaces by adding mesoporous SiO2 nanoparticles to nanocomposite based on PVDF-HFP and PVP polymers26
Effect of thickness, annealing temperature, and molarity on the structural and optical properties of ZnO thin films grown by the SILAR method26
Understanding the interface bonding between C-S-H and carbonate aggregates26
Femtomolar detection of phenol using surface-modified plasmonic refractive index sensor with sodium carboxymethyl cellulose25
Synergetic effects of recombination-blocking, band-bending and gap-state manipulation by interfacial engineering in solid-state DSSCs comprising Cs2SnI6 electrolyte25
Controlling silver deposition morphology on aluminum surfaces: Surfactant modify anisotropy of aluminum surface energy25
Ag decoration as a strategy to enhance the methanol and ethanol sensing on the biphenylene sheet25
Parametric study of visible light active Bi2ZnB2O7 photocatalyst for dye degradation25
A comprehensive review on mechanical and surface characteristics of composites reinforced with coated fibres25
Composite stabilization-assisted repair behavior for rust layer damage of weathering steel in simulated marine atmospheric environments25
TiO2 decorated MXene nanosheets for high-performance ammonia gas sensing at room-temperature25
Robust superhydrophobic surface with excellent corrosion resistance based on wet chemical etching method25
Exploring oxygen migration and capacitive mechanisms: Crafting oxygen-enriched activated carbon fiber from low softening point pitch24
Theoretical design of Z-scheme photocatalyst for water splitting with excellent catalytic performance: GeSe/PtS2 heterojunction24
Recent advances in pulsed electrochemical techniques: Synthesis of electrode materials and electrocatalytic reactions24
Excellent piezo-photocatalytic performance of plasmonic Bi/Bi4Ti3O12 heterojunction synthesized by in-situ reduction24
Efficient photocatalytic degradation of water contaminants via Ag decorated porphyrin-based organic framework materials24
Synthesis of activated carbon loaded nanosilver and study of water corrosion resistance and antimicrobial properties24
Electronic structure modulation and nonlinear bandgap evolution of (001) surfaces in layered 2D APbI₃ (A=MA, FA) perovskites24
Highly sensitive amphetamine drug detection based on silicon nanowires: Theoretical investigation24
Towards an anticancer bioactive glass-Fe3O4/Pectin/Pectic oligosaccharide coatings for biomedical applications24
Durable self-cleaning anti-fog and antireflective titanium-based micro-nano structures on glass by laser marker ablation24
Influence of room-temperature oxidation on stability and performance of reactively sputtered TaN thin films for high-precision sheet resistors24
Theoretical designing of TMDs Janus heterostructures toward efficient photovoltaic and electronic applications24
Coordination engineering of B/N-doped graphene with phosphorus-transition metal diatomic catalysts for enhanced oxygen bifunctionality electrocatalysis24
A Review of CO2 Reduction Reaction Catalyzed by Atomical-Level Ag Nanomaterials: Atom-Precise Nanoclusters and Atomically Dispersed Catalysts24
Enhanced persulfate activated sono-catalytic degradation of brilliant green dye by magnetic CaFe2O4 nanoparticles: Degradation pathway study, assessment of bio-toxicity and cost analysis24
Enhanced NOx adsorption and sensing properties of MoTe2 monolayer by Ni-doping: A first-principles study24
Cerium single atom anchored silver selenide: A high-performance catalyst for hydrogen evolution reaction with ultra-low activation energy and enhanced stability24
Bioinspired Composite Fabrics with Nanoneedle Structures for High Wicking-Evaporation performance24
Graphene oxide as a promising nanofiller for polymer composite24
Surface and interface design of electrocatalysts for hydrogen/oxygen evolution reactions: A bridge to the green-oriented transition of energy24
Unravelling the anisotropic wetting properties of banana leaves with water and human urine23
Ultrasonically decorated zinc cobaltate on nanocellulose interface for supercapacitors23
The electron transfer and free radical generated in the degradation of tetracycline on goethite23
Time-resolved SAXS investigation on structural evolution of plant fibrillar-network during dehydration23
Incorporation of NiO on attapulgite supported Au catalyst for HCHO removal at low temperature23
Metal-organic framework and porous polymer monolith as ion-receptor carrier templates for the solid-state naked-eye sensing of ultra-trace Cr(III) from aqueous medium23
Interface control to improve thermal conductivity of interpenetrating polymer network23
A novel organic-reinforced zirconium-based composite conversion coating with long-term corrosion resistance property for ADC12 aluminum alloy23
Phosphorus dopants triggered enhanced bulk polarization and new active sites in hexagonal ZnIn2S4 toward efficient photocatalytic selective oxidation of benzyl alcohol coupled with H2 evolution23
Distinct mechanisms for the underwater adhesions of Pvfp-5β and Mfp-5: A comparative all-atom molecular dynamics study23
Zinc oxide nanoobjects for dye removal: Effective photocatalyst design via oriented attachment process23
Thermal cycling property of the novel Hf6Ta2O17/YSZ TBCs prepared by atmospheric plasma spraying technology23
Utilizing metal-organic framework porosity for efficient antibiotic separation and sustained release23
In-situ CO2 release from captured solution and subsequent electrolysis: Advancements in integrated CO2 capture and conversion systems23
Enhanced removal of organic pollutants by ball-milled FeS/ZVI activated persulfate process: Characterization, performance, and mechanisms23
Improved E-beam prediction in compact X-ray tube with ceramic charging22
Simultaneously improving in-plane and through-plane thermal conductivity of insulted PVDF composite film using multi-layer and multi-filler strategies22
Adsorption mechanisms of Lead(II) in different soil textures: from macroscopic adsorption kinetics to quantum-scale surfaces interaction22
Chlorin-based photodynamic antimicrobial glass surfaces for the eradication of Staphylococcus aureus22
An innovative method for highly-efficient fabrication of carbon fiber precursors via acrylonitrile emulsion copolymerization coupled to a chemical oscillator22
Hyaluronic acid bisphosphonates as antifouling antimicrobial coatings for PEO-modified titanium implants22
The structure, corrosion resistance, and formation mechanism of a composite conversion film based on oxalate on steel substrates22
Physiochemical aspect of different CuO catalyst surface to APC thermochemical transformation22
Structural and electronic characterization of silicon based MIS contact by xanthene dye molecules (Erythrosine B)22
Theoretical study of NO2, H2O, and CO2 gases adsorbed on SnO2-GeSe monolayer21
Nanoarchitectonics of porous N-doped Co@CoS2 with sulfur vacancies for enhanced peroxymonosulfate activation: Mechanisms and applications in oxytetracycline degradation21
Optimizing ZnSe nanorods with La doping for structural, electrical, and dielectric properties in device applications21
Plasmonic-enabled nanostructures for designing the next generation of silicon photodetectors: Trends, engineering and opportunities21
The simplification and analytical verification of the static liquid bridge force model for particle adhesion in inferior seedling substrates21
Efficient methanol and butanol isomer oxidation using Pt catalysts on NiO–TiO₂/GO hybrid supports21
A comprehensive review of recent developments in metal-organic framework/polymer composites and their applications21
Preparation of zero-valent iron-based composite catalyst with red mud and scrap tire as starting materials for Fenton-like degradation of methyl blue21
Experimental and numerical studies of polyamide 11 and 12 surfaces modified by atmospheric pressure plasma treatment21
Room temperature acetone sensing activity of β-Cyclodextrin coated MoO3-ZrO2 nanocomposite21
Solution-processed high entropy metal oxides as dielectric layers with high transmittance and performance and application in thin film transistors21
Dual-function CoP on nitrogen doped carbon framework with induced interfacial coupling for overall water splitting21
Magnetically recyclable bimetallic Pt-Co/CoO catalyst derived through hydrogen spillover for fast hydrogen release through ammonia borane hydrolysis21
Relevance between structure and spectroscopic studies, along with enhanced NLO response of porphyrin complexes and hybrid nanostructures21
Enhanced removal of Pb (II) and Cd (II) ions from aqueous systems using coated magnetic nanoparticles in activated carbon derived from corncob waste21
An ultraviolet sensor based on surface plasmon resonance in no-core optical fiber deposited by Ag and ZnO film21
Composite 2D–3D carbon-based GO/COF-300@BTA nanocontainer endowing PVB coatings with mechanical enhancement, active and passive corrosion protection properties21
Characteristics of MgO/PCL/PVP antibacterial nanofiber membranes produced by electrospinning technology20
First-principles insights of na-decorated B7N5 monolayer for advanced hydrogen storage20
Effect of ultrasonic irradiation time on the physical and optoelectronic properties of SnSe nanorods20
Ternary heterojunction of 1D CeO2/TiO2 nanofibers decorated with In2S3 nanosheets boosting the photodegradation of organic pollutants20
Enhanced formation of nanometric titanium cones by incorporation of titanium, tungsten and/or iron in a helium ion beam20
A review on the plasma electrolytic oxidation (PEO) process applied to copper and brass20
Operando construction of nickel-modifiedamorphous 2D CaTiO3 nanosheets for enhanced photocatalytic hydrogen production20
Engineering internal bandgap states and heterojunction interfaces in Chitosan-CuO-ZnO nanocomposites for superior photocatalytic degradation of Direct Violet 5120
Sizing agent induces the oriented attachment of 2D nanosheets for preparing high-performance carbon fiber composites20
Assembling UiO-66 into layered HTiNbO5 nanosheets for efficient photocatalytic CO2 reduction20
Suppression of p-type parasitic channel formation at the interface between the aluminum nitride nucleation layer and the high-resistivity silicon substrate20
0D/2D heterojunction of graphene quantum dots/MXene nanosheets for boosted hydrogen evolution reaction20
Manipulating the heterostructure and architecture of Cu/CuO catalyst towards pH-universal hydrogen evolution reaction20
Role of ionic radii and electronegativity of co-dopants (Co, Ni and Cr) on properties of Cu doped ZnO and evaluation of In-vitro cytotoxicity20
Enhanced mechanical performances and corrosion resistance of carbon fibre reinforced PEEK-aluminium alloy fiber metal laminates through an innovative two-step electrochemical treatment20
Silicones with different crosslinking patterns: Assessment from the perspective of their suitability for biomaterials20
Electrospinning carbon-coated hollow aluminum nanobeads fibers for high-performance lithium-ion batteries20
The transformation of type-I La2O3/α-Bi2O3 into multi-heterojunctions during photocatalysis with enhanced photoreactivity19
Construction of robust H2TiO3@PAM hydrogel ion-sieve via in-situ polymerization for Li+ adsorption19
Electromagnetic wave absorption mechanism for nanocomposites of holmium orthoferrite decorated poly(3,4-ethylenedioxythiophene -5-cyanoindole)19
Synergistic effect of HCl, SO2 and O2 on mercury removal by Mn0.5Cu0.5Fe2O4 adsorbent19
Morphology control in oxygen-rich nanotubular titania for enzyme-free glucose detection19
A chemical-free Al-Mg alloy pretreatment method for metal-polymer direct joining by heat and water treatment19
Fibrous silica KCC-1@N-doped carbon nanosheets for supercapacitor applications19
Influence of pulsed Al deposition on quality of Al-rich Al(Ga)N structures grown by molecular beam epitaxy19
Interface engineering of β-Ga2O3 MOS-type Schottky barrier diode using an ultrathin HfO2 interlayer19
Systematic study: From worldwide-renowned drink to low-cost solvent for non-organic synthesis of two-dimensional tungsten disulfide19
Single Pd atom embedded Janus HfSeTe as promising sensor for dissolved gas detection in transformer oil: A density functional theory study19
Enhancement of H2 gas sensing properties of ZnO films by Mg alloying19
Editorial Board19
A novel recyclable surface ion-imprinted graphene aerogels for high selective adsorption of lithium in salt lake brine19
Bismuth-based ternary heterojunction prepared by acetate-glycol recyclable system for excellent glyphosate degradation19
Strain-induced phase transition at the surface of epitaxial La0.65Sr0.35MnO3 films19
Strain tunable electronic, optical, and photovoltaic properties of monolayer β2-SrX2Y4 (X = Al, Ga, In, Y = S, Se)19
A novel selenization-free chalcopyrite CIGSSe formation in a heat-treated Cu2Se/S/Ga3Se2/S/In3Se2 multilayer thin film (ML) and ML/n-Si heterojunction characteristics19
Novel Cu1+xMn1-xSeTe nanostructure fabrication by simple microwave synthesis for potential photodetection and dielectric applications19
High phosphorus electroless NiP coatings – Effect of rhenium addition on coating/solder interface19
Improving photocatalytic performance of nickel oxide infused chitosan nanocomposite for adsorption of organic dyes19
Laser in-situ fabrication of high anti-corrosion/friction graphene composites as bipolar plate in harsh environment19
Electronic state reconfiguration induced by non-metal-dopants in Janus FeReS3 monolayer for hydrogen evolution reaction19
Effective nanomembranes from chitosan/PVA blend decorated graphene oxide with gum rosin and silver nanoparticles for removal of heavy metals and microbes from water resources18
Discrimination of alkaline earth metals and transition metals using CD/CPL spectroscopy18
Levorotatory-twist-patterned PPTA membrane induced by directional motion of D-Phenylalanine for chiral resolution18
Polymer-based piezoelectric materials: Structure, mechanism, applications, and future trends18
First-principles design of PtPd bimetal dispersed WTe2 monolayer for sensing thermal runaway gases: Enhanced performance against single Pt or Pd dispersion18
Surface quenching mechanism and optimal coating shell thickness of nanomaterials18
Regulation of SnO2 ETL by Diphenylsulfone for highly efficient MAPbI3 based PSCs over 21.2% in open Air18
Hansen solubility parameters from surface measurements: A comparison of different methods18
vdW electrene XCl (X=Sc, Y, and La) as electron injector in XCl/CrI3 heterostructures: Inducing half-metallicity in both CrI3 and XCl monolayers18
Improvement in electrochemical and long-term immersion corrosion resistance of AH32 marine steel using laser shock peening18
Regulating ligand length to improve the PL QY and stability of CsPbCl0.9Br2.1 nanocrystals for LEDs and photoelectric applications18
Modulating interface internal electric field for efficient charge separation in Co3O4/M-TiO2 p-n junction18
Carbon nanotube-doped Ag2<18
P25 and its components - Electronic properties and photocatalytic activities18
A simple and efficient voltammetric sensor for dopamine determination based on ZnO nanorods/electro-reduced graphene oxide composite18
Nickel-molybdenum oxide catalysts used in the catalytic hydrogenation of styrene oxide to produce 2-phenylethanol18
Multi-walled carbon nanotubes and graphene oxide-based epoxy hybrid nanocomposites: Investigation of nanofiller modification effect18
Theoretical insights on transition metals confined in black phosphorus for engineering stable single-atom catalysts18
Droplet impacting multi-layer soap bubbles on patterned surfaces18
Self-assembled silane films on carbon steel surfaces and its corrosion resistance in sodium chloride solution18
Wearable sensors for real-time physiological monitoring based on self-assembled diphenylalanine peptide nanostructures18
0.15450000762939