Surfaces and Interfaces

Article	Citations
Is 3D surface structuring always a prerequisite for effective SERS?	136
Editorial Board	101
Conical porous hollow g-C3N4 charge separation with high efficiency for enhancing visible-light photocatalytic activity	90
Flexible Cu-TA/PVDF composite film for efficient piezo-catalysis and biomolecule detection	89
Theoretical designing of TMDs Janus heterostructures toward efficient photovoltaic and electronic applications	78
Temperature influence on the formation of triangular features superimposed on nanoripples produced by low-energy ion beam	78
HfC HfO2SiO2 nanocomposite ceramic coating formed on TiAlNb medium-entropy alloy by LPDS: Microstructure evolution and ablation behavior	76
Stable acidic water oxidation by tunable electronic states in β-PbO2 anode electrocatalyst aided by incorporation of various anions and cations	75
Parametric study of visible light active Bi2ZnB2O7 photocatalyst for dye degradation	70
Neutral salt spray aging effect on low emissivity coating	67
Effect of bottom electrode on rectification performance in pyrene-terminated n-alkanethiolate	65
Synergetic effects of recombination-blocking, band-bending and gap-state manipulation by interfacial engineering in solid-state DSSCs comprising Cs2SnI6 electrolyte	63
“Intermediate template” assisted assembly growth of transition metal doped 2D porous boron nitride sheet as an efficient adsorbent for CO2 capture	63
Effect of milling atmosphere on stability and surface properties of ZnO/vermiculite hybrid nanocomposite powders	61
Recent advances in pulsed electrochemical techniques: Synthesis of electrode materials and electrocatalytic reactions	56
Synthesis of LaW/Ag/GNRs nanocomposite: Application as transducer material for the simultaneous nano molar detection of synthetic dyes and as anode material for Li ion batteries	55
New polymeric nanocomposite thin films for transparent optoelectronics: Impact of In(acac)3 on the structural, optical and photoelectrical characteristics of PVA films	55
Towards decoupling chemical and mechanical adhesion at the electroplated metal/polymer interface via precision surface texturing	54
Effects of bimetallic nanoparticles Ag and TiO2 embedment on tellurite zinc–silicate glass: Self-cleaning characteristics	52
Analysis of impulse withstand voltage of ester-based nanofluids	52
Efficient and stable planar MAPbI3 perovskite solar cells based on a small molecule passivator	52
Synthesis of activated carbon loaded nanosilver and study of water corrosion resistance and antimicrobial properties	52
Preparing of superamphiphobic surface by fabricating hierarchical nano re-entrant pyramids on micro-cones using a combined laser-electrochemistry method	52
Wetting behavior and interfacial characteristics of Ti33Zr17Cu50 amorphous alloy on AlN	49
Formation of laser-induced periodic surface structures on Zr-based bulk metallic glasses with different chemical composition	49

How does water of crystallization influence the optical properties, band structure and photocatalytic activity of tungsten oxide?	49
Graphene oxide/polydopamine interface co-reinforced carbon paper: With comprehensive mechanical properties, electrical conductivity and air permeability	48
Influence of Ag+ ions on the physical properties of spray coated CeO2 thin films and photo-response of p-Si/n-SDC junction diodes	48
Surface wettability of vertical harps for fog collection	47
Zinc-manganese bimetallic sulfides anchored on the surface of corn stalk carbon used as the anode of lithium ion batteries	47
Ag2O doped SnSe: A highly discriminative sensor material for DNA sequencing	47
The stability and geometrical characteristics of solid-liquid interfacial nanobubbles in complex aqueous solution environments	46
Influence of room-temperature oxidation on stability and performance of reactively sputtered TaN thin films for high-precision sheet resistors	43
Enhanced oxygen mobility of Mn-Ce solid solution catalysts for polysaccharide-assisted catalytic oxidation of toluene	42
Bioinspired low temperature Cu bonding interfaces with interlocked microstructures to achieve high reliability	41
Modified spinel ferrite–based composite membranes with highly proficient photocatalytic activity	41
Enhanced photocatalytic hydrogen evolution of an imine-linked covalent triazine framework through the assistance of Ti3C2Tx	41
Effect of grain boundary scattering on carrier mobility and thermoelectric properties of tellurium incorporated copper iodide thin films	41
Mitigation of cavitation erosion using laser-induced periodic surface structures	40
Coordination engineering of B/N-doped graphene with phosphorus-transition metal diatomic catalysts for enhanced oxygen bifunctionality electrocatalysis	40
Reinforcing and toughening blends of recycled acrylonitrile-butadiene-styrene/recycled high-impact polystyrene through ionic crosslinking	39
One-step extraction of CuCl2 from Cu-Ni mixed electroplating sludge by chlorination-mineralization surface-interface phase change modulation	39
A Review of CO2 Reduction Reaction Catalyzed by Atomical-Level Ag Nanomaterials: Atom-Precise Nanoclusters and Atomically Dispersed Catalysts	38
Ag decoration as a strategy to enhance the methanol and ethanol sensing on the biphenylene sheet	38
Surface modification of nanofibrous polyethersulfone scaffolds with fluorapatite nanoparticles toward improved stem cell behavior and osteogenic activity in vitro	38
Synthesis of low surface energy thin films of nonhalogenated polyepichlorohydrin-triazoles with side alkyl chain	38
Fluorine-doped g-C3N5 quantum dots for detection of heavy metal ions	37
Surface and interface design of electrocatalysts for hydrogen/oxygen evolution reactions: A bridge to the green-oriented transition of energy	36
Efficient antibiotic remediation from wastewater using a lamellar free-standing 2D graphene oxide/Ti3C2Tx hybrid membrane	36
Highly sensitive amphetamine drug detection based on silicon nanowires: Theoretical investigation	36
Controlling silver deposition morphology on aluminum surfaces: Surfactant modify anisotropy of aluminum surface energy	35
Liquid-solid interface diffusion behaviors of furfural in the insulation systems of natural ester-cellulose paper and mineral oil-cellulose paper	35
Cerium single atom anchored silver selenide: A high-performance catalyst for hydrogen evolution reaction with ultra-low activation energy and enhanced stability	34
Hollow cylindrical ternary ZnO/Co3O4/CuO nanocomposite thick film on inter-digitated electrodes for selective ammonia gas sensing	34
Excellent piezo-photocatalytic performance of plasmonic Bi/Bi4Ti3O12 heterojunction synthesized by in-situ reduction	34
Biomass microcrystalline cellulose based solar evaporator with aligned channels for clean water and electricity co-generation	34
Multicolor emitting luminescent MgO nanocubes for implication in ratiometric optical thermometry	33
Developing feature-rich electronic and magnetic properties in theβ-As monolayer for spintronic and	33
Enhancing piezocatalytic dye degradation through ball milling-induced polarization in nano bismuth zinc borate	33
Synthesis and design strategies of codoped titanium dioxide with band alignment and multiple reflections of incident light for efficient visible light activity	33
Surfactant assisted hydrothermal synthesis of graphene reinforced nanoferrite: A novel nanocomposite for photocatalytic abatement of azo dye	33
Effect of Co doping in tailoring the crystallite size, surface morphology and optical band gap of CuO thin films prepared via thermal spray pyrolysis	33
Au atomic clusters on MoS2 nanosheets for hydrogen evolution reaction	32
Defects assisted the enhancement of optical and ferromagnetism in Zn1-xCoxS quantum dots: Toward efficient optoelectronic and spintronic applications	32
Peeling mechanism of interlocked interface between etched acrylonitrile-butadiene-styrene and electroplated metal layer	32
Facile synthesis of mesoporous ncCoW powder via electrodeposition; characterization and its efficient application on hydrogen generation and organic pollutants reduction	32
TiO2 decorated MXene nanosheets for high-performance ammonia gas sensing at room-temperature	32
A comprehensive review on mechanical and surface characteristics of composites reinforced with coated fibres	32
Influence of different metal-modified Beta zeolites on the liquid-phase isomerisation of xylene and reaction mechanisms	31
Photodetection and photocatalytic properties of Ag2BiI5 thin films formed by iodization of Ag-BiI3 layers	31
Facile and scalable preparation of solution-processed succulent-like silver nanoflowers for 3D flexible nanocellulose-based SERS sensors	31
Adsorption of toxic and harmful gas CO on TM (Ni, Pd, Pt) doped MoTe2 monolayer: A DFT study	31
A hybrid epoxy resin realized by facile glycidyl-grafting of highly-branched polyurethane toward heat-free structural bonding	31
Mixed halide perovskite compound thin film with large cation guanidinium and applications: MIS (Au/GUAPbI3-xClx/p-Si/Al) and p-FET (Al/p-Si/SiO2/GUAPbI3-xClx/Al)	31
Malachite green removal using algal biochar and its composites with kombucha SCOBY: An integrated biosorption and phycoremediation approach	31

Surface and electrochemical characteristics of S-scheme nanoheterostructured photocatalysts of AgIO3/Cu2SnS3 with enhanced solar energy driven photocatalytic activity	30
XO2 (X=Ti, Zr, and Hf) nanoparticles modified SnS2 nanosheet for detection and scavenging towards NO2 and SO2	30
One pot preparation of CeO2@Alginate composite beads for the catalytic reduction of MB dye: Effect of cerium percentage	30
Molecular dynamics simulation of dislocation network formation and tensile properties of graphene/TiAl-layered composites	30
Scalable self-growth of magnetic Janus microparticles for microplastics degradation	30
Engineered design of MnFe2O4/CoNiFe-LTH/g-C3N4 heterocatalyst for doxycycline degradation via Fenton oxidation process: Optimization and mechanism	30
Research progress of Cu-based and Ce-based catalysts for the selective catalytic reduction of NO with CO	30
Core-shell nanorods film of p-CuZnS/n-TiO2 with boosting interfacial charge separation for sensitive photoelectrochemical photodetector	30
A simplistic molecular agglomeration of carbon nitride for optimized photocatalytic performance	30
Towards an anticancer bioactive glass-Fe3O4/Pectin/Pectic oligosaccharide coatings for biomedical applications	30
Bioinspired Composite Fabrics with Nanoneedle Structures for High Wicking-Evaporation performance	29
Engineering S-scheme heterojunction MgO/WO3-integrated Graphene photocatalyst for robust detoxification of tetracycline: Mechanistic insight and actual matrix remediation	29
Lithium and potassium decorated naphthylene for high capacity hydrogen storage by DFT and GCMC study	29
Efficient energy storage with Li-ion decorated MoS2@TaS2 van der Waals heterostructure: A High-performance material for advanced storage devices	29
Theoretical design of Z-scheme photocatalyst for water splitting with excellent catalytic performance: GeSe/PtS2 heterojunction	29
Enhanced visible-driven photocatalysis in black TiO2 nanosheets with co-exposed {001} and {101} planes	29
Efficient photocatalytic degradation of water contaminants via Ag decorated porphyrin-based organic framework materials	29
Electronic bandstructure modulation of MoX2/ZnO(X:S,Se) heterostructure by applying external electric field	29
Exploring oxygen migration and capacitive mechanisms: Crafting oxygen-enriched activated carbon fiber from low softening point pitch	29
Visualization of the impact of fluorocarbon (CFₓ) passivation films and bubble layers on the anode effect	29
Enhanced persulfate activated sono-catalytic degradation of brilliant green dye by magnetic CaFe2O4 nanoparticles: Degradation pathway study, assessment of bio-toxicity and cost analysis	29
Silicon dioxide (SiO2) solid blocking layer on through-glass via surface for efficient highly selective copper filling	28
Synthesis of amine-functionalized CeFe2O4-biochar for V(Ⅳ) and V(V) adsorption: characterization, mechanism, and regeneration capacity	28
Unveiling the uniform copper thickening mechanism of micro through-hole using 4,7,10-trioxa-1,13-tridecanediamine as a novel and single additive in an acidic electroplating bath	28
Dual trace detection of hazardous substances by aptamer-functionalized gold nanofilms based on surface-enhanced Raman spectroscopy	28
Enhanced diethylamine catalytic degradation performance of HZSM-5 supported copper oxides by Na modification	28
Cu-ZSM-5 as a regenerable adsorbent for removal of low-concentration methyl mercaptan	28
Corrigendum to “Functionalized chalcogenide thin films for early detection of plant diseases via spore detection” [Surfaces and Interfaces 56 (2025) 105508]	28
Gold nanocage-carbon nanodot composites activate ornidazole against biofilm infections through modulating the hypoxic microenvironment	28
Influence of molarity on the structural, optical, photocatalytic and electrochemical properties of CoMn₂O₄ thin films fabricated by spray pyrolysis	27
Prediction of two-dimensional AlBrSe monolayer as a highly efficient photocatalytic for water splitting	27
Hierarchical mesoporous CuO/ZrO2 nanocomposite photocatalyst for highly stable photoinduced desulfurization of thiophene	27
Tackling microbial adhesion to surfaces by adding mesoporous SiO2 nanoparticles to nanocomposite based on PVDF-HFP and PVP polymers	27
In-situ interface engineering of NVOPF nanosheets with cross-linked conductive networks for superior sodium storage	27
Enhanced NOx adsorption and sensing properties of MoTe2 monolayer by Ni-doping: A first-principles study	27
Robust and stable organic sulfonate sodium salt-coated superhydrophilic mesh for ultra-fast gravity-drive oil-water separation	27
Graphene oxide as a promising nanofiller for polymer composite	27
Formic acid-assisted electrochemical deposition of CoMo-P on ZIF-67 derived NiCo LDH towards enhanced overall water splitting performance	27
Durable self-cleaning anti-fog and antireflective titanium-based micro-nano structures on glass by laser marker ablation	27
Robust superhydrophobic surface with excellent corrosion resistance based on wet chemical etching method	26
Toward condensing stable water meniscus for Dip-pen nanolithography considering ambient condition, surface wettability, and SPM probe structure	26
Green synthesis of nitrogen-doped graphene quantum dots by recycling waste graphite and impact of oxygen adsorption on enhancing photoluminescence	26
Effect of CO2 on the selective catalytic reduction of NO with NH3 of Fe0.4Ce0.6O2-δ catalyst: adsorption behavior	26
Preparation of electronic pastes for high-precision screen printing: action mechanisms and synergistic effects of different polymer binders	26
Insight into the adsorption and co-adsorption of PPCPs on Ti3C2Tx MXene: Behaviors, mechanisms and application potentials	26
Flexible switch between photocatalysis and electrocatalysis for CO2RR by stacking mode	26
Self-nucleation growth of bimetallic niobium tungsten oxide electrodes with delaminated nanostructure for excellent dual-band electrochromic performance	26
Engineering advanced mesoporous nanomaterials for high performance supercapacitors: A review	26
Enhanced adsorption: Reviewing the potential of reinforcing polymers and hydrogels with nanomaterials for methylene blue dye removal	26
pH-driven morphological control of Pt-Cu nanocrystals for excellent catalytic activity in methanol oxidation reaction	26
Editorial Board	25
Large-scale, transferable and double-sided metasurface absorber for the visible to near-infrared spectrum	25
Comprehensive study of the effect of Hf and Ta co-doped MCrAlY bond coat on the high-temperature properties of thermal barrier coating	25
Unravelling the anisotropic wetting properties of banana leaves with water and human urine	25
Effect of Ti concentration on the wetting of molten Cu-8.6Zr-xTi alloys on Si3N4 substrate	25
Comprehensive enhancement of photocatalytic H₂O₂ generation and antibacterial efficacy on carbon nitride through a straightforward polydopamine coating strategy	25
Enhanced photocatalytic activity in RhB dye degradation by Mn and B co-doped mixed phase TiO2 photocatalyst under visible light irradiation	25
Regulation of SnO2 ETL by Diphenylsulfone for highly efficient MAPbI3 based PSCs over 21.2% in open Air	25
P25 and its components - Electronic properties and photocatalytic activities	25
Zinc oxide nanoobjects for dye removal: Effective photocatalyst design via oriented attachment process	25
Recent advancement in sensitive detection of carcinoembryonic antigen using nanomaterials based immunosensors	25
Study on the structural, magnetic, and magnetodielectric properties of M-type BaFe12O19 and SrFe12O19 hexaferrite nanoparticles	25
Optical biosensor manufacturing for Chronic Lymphocytic Leukemia biomarker detection with -walled carbon nano tubes-based multi electrodes	25
Ultrasonically decorated zinc cobaltate on nanocellulose interface for supercapacitors	24
Comprehensive study of linear and nonlinear optical properties of polyaniline-Al2O3 nanocomposites for optoelectronic applications	24
Long-term surface modification of PEEK polymer using plasma and PEG silane treatment	24
Engineering internal bandgap states and heterojunction interfaces in Chitosan-CuO-ZnO nanocomposites for superior photocatalytic degradation of Direct Violet 51	24
Role of polyaniline coating on nanosilica particles in polyvinylidene fluoride nanocomposites for energy storage	24
Regulating surface morphology and thermochromic properties of VO2 films by Cu-Ag bimetallic nanoparticles	24
Preparation of zero-valent iron-based composite catalyst with red mud and scrap tire as starting materials for Fenton-like degradation of methyl blue	24
Characteristics of MgO/PCL/PVP antibacterial nanofiber membranes produced by electrospinning technology	24
Sizing agent induces the oriented attachment of 2D nanosheets for preparing high-performance carbon fiber composites	24
Thermal cycling property of the novel Hf6Ta2O17/YSZ TBCs prepared by atmospheric plasma spraying technology	24
Metal-organic framework and porous polymer monolith as ion-receptor carrier templates for the solid-state naked-eye sensing of ultra-trace Cr(III) from aqueous medium	24
Effective retention of radioactive Cs+ and Ba2+ ions using β-cyclodextrin functionalized diatomite (β-CD/D) as environmental adsorbent; characterization, application, and safety	24
Dual-function CoP on nitrogen doped carbon framework with induced interfacial coupling for overall water splitting	24
An ultraviolet sensor based on surface plasmon resonance in no-core optical fiber deposited by Ag and ZnO film	24
Rational design of an innovative hybrid biosensor utilizing functionalized ZnO-Cys-graphene ternary composite for enzyme-free glucose detection	23
Time-resolved SAXS investigation on structural evolution of plant fibrillar-network during dehydration	23
Annealing effect on the barrier characteristics and interface properties of Au/Pt/Ti/n-InAlAs Schottky contacts	23

Optimization of organic dyes photodegradation and investigation of the anticancer performance by copper oxide/graphene oxide nanocomposite	23
Phosphorus dopants triggered enhanced bulk polarization and new active sites in hexagonal ZnIn2S4 toward efficient photocatalytic selective oxidation of benzyl alcohol coupled with H2 evolution	23
Facile synthesis of novel Ag@cerium zirconate heterostructure for efficient oxygen evolution reaction	23
Collection of polymer bubble as a nanoscale membrane	23
Wearable sensors for real-time physiological monitoring based on self-assembled diphenylalanine peptide nanostructures	23
Physiochemical aspect of different CuO catalyst surface to APC thermochemical transformation	23
Tailoring tribological properties of Ti-Zr alloys via process design of laser surface texturing and thermal oxidation	23
Carbon quantum dots derived from resveratrol enhances anti-virulence activity against Pseudomonas aeruginosa	23
0D/2D heterojunction of graphene quantum dots/MXene nanosheets for boosted hydrogen evolution reaction	23
Carbon nanotube-doped Ag2<	23
Surface structures of Au–Si compounds grown on flat and stepped Si substrates	23
Interface control to improve thermal conductivity of interpenetrating polymer network	22
Utilizing metal-organic framework porosity for efficient antibiotic separation and sustained release	22
Improved E-beam prediction in compact X-ray tube with ceramic charging	22
Enhanced removal of Pb (II) and Cd (II) ions from aqueous systems using coated magnetic nanoparticles in activated carbon derived from corncob waste	22
A simple and efficient voltammetric sensor for dopamine determination based on ZnO nanorods/electro-reduced graphene oxide composite	22
First-principles insights of na-decorated B7N5 monolayer for advanced hydrogen storage	22
The electron transfer and free radical generated in the degradation of tetracycline on goethite	22
Fabrication of highly catalytic active α-Fe2O3-carbon nanotube composites for thermal decomposition of ammonium perchlorate by light and temperature control strategy	22
The simplification and analytical verification of the static liquid bridge force model for particle adhesion in inferior seedling substrates	22
Plasmonic-enabled nanostructures for designing the next generation of silicon photodetectors: Trends, engineering and opportunities	22
Enhanced mechanical performances and corrosion resistance of carbon fibre reinforced PEEK-aluminium alloy fiber metal laminates through an innovative two-step electrochemical treatment	22
Artificial photoelectric synaptic devices with ferroelectric diode effect for high-performance neuromorphic computing	22
Photoelectrochemical sensing of hydrogen peroxide and inhibition of breast cancer cell growth based on a porphyrin derivative modified TiO2 composite	21
Copper-functionalized hydroxyapatite nanoparticles to counteract fungal infections	21
A novel organic-reinforced zirconium-based composite conversion coating with long-term corrosion resistance property for ADC12 aluminum alloy	21
Ab initio insights into Graphene-Zirconium disulfide/diselenide heterostructure as electrode material for alkali-ion batteries	21
Enhanced formation of nanometric titanium cones by incorporation of titanium, tungsten and/or iron in a helium ion beam	21
Distinct mechanisms for the underwater adhesions of Pvfp-5β and Mfp-5: A comparative all-atom molecular dynamics study	21
Magnetically recyclable bimetallic Pt-Co/CoO catalyst derived through hydrogen spillover for fast hydrogen release through ammonia borane hydrolysis	21
Flower, stem, and leaf extracts from Hypericum perforatum L. to synthesize gold nanoparticles: Effectiveness and antioxidant activity	21
Silicones with different crosslinking patterns: Assessment from the perspective of their suitability for biomaterials	21
Suppression of p-type parasitic channel formation at the interface between the aluminum nitride nucleation layer and the high-resistivity silicon substrate	21
In-situ CO2 release from captured solution and subsequent electrolysis: Advancements in integrated CO2 capture and conversion systems	21
High-performance aluminum-ion batteries enabled by architected reduced graphene oxide electrodes	21
Status and applications of femtosecond laser preparation of SERS substrates containing noble metals nanoparticles	21
Electromagnetic wave absorption mechanism for nanocomposites of holmium orthoferrite decorated poly(3,4-ethylenedioxythiophene -5-cyanoindole)	20
Systematic study: From worldwide-renowned drink to low-cost solvent for non-organic synthesis of two-dimensional tungsten disulfide	20
High-κ La2O3 as an anode modifier to reduce leakage current for efficient perovskite solar cells	20
Determining the atomic coordination number in the structure of β	20
Regulating ligand length to improve the PL QY and stability of CsPbCl0.9Br2.1 nanocrystals for LEDs and photoelectric applications	20
Strain tunable electronic, optical, and photovoltaic properties of monolayer β2-SrX2Y4 (X = Al, Ga, In, Y = S, Se)	20
MgTe for efficient adsorption of lithium-ion battery fault gases (H2, CO, and CO2) and failure risk index calculation: A DFT computational study	20
Relevance between structure and spectroscopic studies, along with enhanced NLO response of porphyrin complexes and hybrid nanostructures	20
Continuous flow production of bioactive ceria quantum dots: New paradigms to the effect of process parameters on surface oxygen vacancy tuning	20
Electrospinning carbon-coated hollow aluminum nanobeads fibers for high-performance lithium-ion batteries	20
A novel selenization-free chalcopyrite CIGSSe formation in a heat-treated Cu2Se/S/Ga3Se2/S/In3Se2 multilayer thin film (ML) and ML/n-Si heterojunction characteristics	20
Construction of robust H2TiO3@PAM hydrogel ion-sieve via in-situ polymerization for Li+ adsorption	20
Photofunctional gold nanocluster-based nanocomposite coating for enhancing anti-biofouling and anti-icing properties of flexible films	20
Single Pd atom embedded Janus HfSeTe as promising sensor for dissolved gas detection in transformer oil: A density functional theory study	20
Interface engineering of β-Ga2O3 MOS-type Schottky barrier diode using an ultrathin HfO2 interlayer	20
Ternary heterojunction of 1D CeO2/TiO2 nanofibers decorated with In2S3 nanosheets boosting the photodegradation of organic pollutants	20
Synergistic effect of HCl, SO2 and O2 on mercury removal by Mn0.5Cu0.5Fe2O4 adsorbent	20
Novel synthesis route for the preparation of mesoporous nitrogen-doped carbons from forestry wastes for supercapacitors	20
Hyaluronic acid bisphosphonates as antifouling antimicrobial coatings for PEO-modified titanium implants	20
Effect of ultrasonic irradiation time on the physical and optoelectronic properties of SnSe nanorods	19
Strain-induced phase transition at the surface of epitaxial La0.65Sr0.35MnO3 films	19
Operando construction of nickel-modifiedamorphous 2D CaTiO3 nanosheets for enhanced photocatalytic hydrogen production	19
DA/TiO2 composite superhydrophobic coatings with enhanced wear resistance and oil/water separation	19
Morphology control in oxygen-rich nanotubular titania for enzyme-free glucose detection	19
Modulating interface internal electric field for efficient charge separation in Co3O4/M-TiO2 p-n junction	19
Novel Cu1+xMn1-xSeTe nanostructure fabrication by simple microwave synthesis for potential photodetection and dielectric applications	19
The transformation of type-I La2O3/α-Bi2O3 into multi-heterojunctions during photocatalysis with enhanced photoreactivity	19
Mechanistic insights into the efficient activation of peracetic acid by ZIF-67 for bisphenol A degradation	19
Two-dimensional XYN3 (X=V, Nb, Ta; Y=Si, Ge): Promising optoelectronic materials in photovoltaic photodetectors	19
Changes in electrical conductance in the limited area of microcrystalline graphene due to the spatial proximity of water droplet	19
Influence of pulsed Al deposition on quality of Al-rich Al(Ga)N structures grown by molecular beam epitaxy	19
Simultaneously improving in-plane and through-plane thermal conductivity of insulted PVDF composite film using multi-layer and multi-filler strategies	19
Surface quenching mechanism and optimal coating shell thickness of nanomaterials	19
Enhancement of H2 gas sensing properties of ZnO films by Mg alloying	19
Carbon dot nanoarchitectonics with high photoluminescence for efficient Cr ion sensors	19
Room temperature acetone sensing activity of β-Cyclodextrin coated MoO3-ZrO2 nanocomposite	18
A chemical-free Al-Mg alloy pretreatment method for metal-polymer direct joining by heat and water treatment	18
Enhanced oxygen evolution reaction by controlled assembly of Co3O4 nanorods on TiB2 nanosheets	18
Improving photocatalytic performance of nickel oxide infused chitosan nanocomposite for adsorption of organic dyes	18
Bismuth-based ternary heterojunction prepared by acetate-glycol recyclable system for excellent glyphosate degradation	18
Reactive graphene by one-pot grafting toward tough and fire-retardant thermoset nanocomposites	18
Efficient catalytic application of Cu-Fe bimetallic nanoparticles towards the preparation of bio-medically important polymer based Schiff bases	18
Editorial Board	18
A novel recyclable surface ion-imprinted graphene aerogels for high selective adsorption of lithium in salt lake brine	18
Laser in-situ fabrication of high anti-corrosion/friction graphene composites as bipolar plate in harsh environment	18
Structural and electronic characterization of silicon based MIS contact by xanthene dye molecules (Erythrosine B)	18
Electronic state reconfiguration induced by non-metal-dopants in Janus FeReS3 monolayer for hydrogen evolution reaction	18
A new nanocomposite as adsorbent and catalyst for enhanced removal of methylene blue	18
High phosphorus electroless NiP coatings – Effect of rhenium addition on coating/solder interface	18
Corrigendum to “Understanding Interfacial Dynamics: Hydrostatic Pressure-Induced Sono-Dispersion of Carbon Nanotubes” [Surfaces and Interfaces, 51, (2024), 104740]	18
Additive-assisted cobalt electrodeposition as surface magnetic coating to enhance the inductance of spiral copper inductors	18
Fibrous silica KCC-1@N-doped carbon nanosheets for supercapacitor applications	18
Adsorption and X-ray photoelectron spectroscopy investigation of bisphosphonates on titania and hydroxyapatite surfaces	18
Uremic metabolite-zwitterionic hemocompatible poly ether sulfone dialysis membranes: Computational and hemocompatibility assessment based on hydration layer stability and ex-vivo investigations	18
Development of Cu2O-Cu-ZnO ternary nanocomposites for high-performance photoelectrochemical non-enzymatic glucose sensor	17
Effective nanomembranes from chitosan/PVA blend decorated graphene oxide with gum rosin and silver nanoparticles for removal of heavy metals and microbes from water resources	17
Chlorin-based photodynamic antimicrobial glass surfaces for the eradication of Staphylococcus aureus	17
Droplet impacting multi-layer soap bubbles on patterned surfaces	17
Composite 2D–3D carbon-based GO/COF-300@BTA nanocontainer endowing PVB coatings with mechanical enhancement, active and passive corrosion protection properties	17