Journal of Electrochemical Energy Conversion and Storage

Papers
(The median citation count of Journal of Electrochemical Energy Conversion and Storage is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
A Novel Trigger Mechanism for a Dual-Filter to Improve the State-of-Charge Estimation of Lithium-Ion Batteries36
Multi-Objective Optimization of Structural Parameters of Air-Cooled System for Lithium Battery Pack Based on Surrogate Model24
Electrochemical Evaluation of Helical Carbon Nanofibers Prepared by Ethanol Flame Method as Anode Materials of Lithium-Ion Batteries23
The Characteristics of a Novel After-Burner Used for Metal-Supported Planar SOFC System21
State of Health Estimation for Lithium-Ion Batteries Based on Multi-Scale Frequency Feature and Time-Domain Feature Fusion Method18
Eco-Technoeconomic Analyses of Natural Gas-Powered SOFC/GT Hybrid Plants Accounting for Long-Term Degradation Effects Via Pseudo-Steady-State Model Simulations17
Ni-ZIF-8@ZIF-67-Derived Bimetallic Doped Pt-Based Carbon Catalyst for Hydrogen Evolution Reaction16
Effect of Substrate Temperature on the Electrochemical and Supercapacitance Properties of Pulsed Laser-Deposited Titanium Oxynitride Thin Films15
Associate Editor’s Recognition14
Lithium-Ion Battery Strain Gauge Monitoring and Depth of Discharge Estimation12
Exploring the influence of bismuth content on the electrochemical performance of aluminum anodes in Aluminum-air battery12
Investigation of the Power Generation Performance of a Stack by Reverse Electrodialysis and Its Influencing Factors11
Power Batteries State of Health Estimation of Pure Electric Vehicles for Charging Process11
Control Co-Design of Lithium-Ion Batteries for Enhanced Fast-Charging and Cycle Life Performances11
Lithium Battery Remaining Useful Life Prediction Based on Multi-Kernel Support Vector Regression With Hybrid Optimization Algorithm11
Critical Review of Hydrogen Production via Seawater Electrolysis and Desalination: Evaluating Current Practices10
Graphene Oxide-Induced Carbon Nanoporous Framework Towards Advanced Composite Anode Material for Lithium-Ion Batteries9
Tuning the Cationic Ratio of Fe1CoxNiyP Integrated on Vertically Aligned Reduced Graphene Oxide Array via Electroless Plating as Efficient Self-Supported Bifunctional Electrocatalyst for Water Splitti9
State of Health Estimation Method for Lithium-Ion Batteries Based on Nonlinear Autoregressive Neural Network Model With Exogenous Input9
Intelligently Constructing Polyaniline/Nickel Hydroxide Core–Shell Nanoflowers as Anode for Flexible Electrode-Enhanced Lithium-/Sodium-Ion Batteries8
A Fault Diagnosis Method for Lithium Batteries Based on Optimal Variational Modal Decomposition and Dimensionless Feature Parameters8
Low Overpotential Electroreduction of CO2 on Porous SnO2/ZnO Catalysts7
Heat Transfer Improvement of Prismatic Lithium-Ion Batteries via a Mini-Channel Liquid-Cooling Plate With Vortex Generators7
Lithium-Ion Battery State of Health Estimation Based on Electrochemical Impedance Spectroscopy and Cuckoo Search Algorithm Optimized Elman Neural Network7
Improving Energy Storage Properties of Magnesium Ion Battery: Regulating MnO2/Ti3C2 Crystal Structure7
A Novel Phosphide Derived From Metal-Organic Frameworks as Cost-Effective Electrocatalyst for Oxygen Evolution Reaction7
Synthesis of Proton Conducting and Highly Stable PWA-ZRP-Doped Composite Membrane for Proton Exchange Membrane Fuel Cell7
Optimal Control of Active Cell Balancing for Lithium-Ion Battery Pack With Constraints on Cells’ Current and Temperature7
Study on the Capacity Degradation Mechanism and Capacity Predication of Lithium-Ion Battery Under Different Vibration Conditions in Six Degrees-of-Freedom6
A Comparative Study of Parameter Identification Fusion Methods With a High-Precision Supercapacitor Model for Electric Vehicles6
Special Section on Degradation Prediction and Recycling of Renewable Energy and Energy Storage Systems: Scenarios of 2020–20256
Simulation of All-Solid-State Lithium-Ion Batteries With Fastening Stress and Volume Expansion6
Porous Carbon With Facial Tuning of the Heteroatom N by Polyvinylidene Chloride Dehalogenation Toward Enhanced Supercapacitor Performance6
Impact on Anode Performance of Lithium-Ion Batteries by Deep Cryogenic Treated SnSb/C Nanofiber Derived From Inorganic Precursors6
Creep and Anisotropy of Free-Standing Lithium Metal Foils in an Industrial Dry Room6
Reviewer's Recognition6
Joint Estimation of State of Charge and State of Health of Lithium Ion Battery5
On the Influence of Ball Milling Time on the Structure and Electrochemical Performance of (Sn71Co29)50C50 wt% Anodes for Li-Ion Battery Applications5
Special Section on Mass and Charge Transport in Fuel Cells and Metal-Ion Batteries5
Electric Vehicles Charging Time Prediction Based on Multimodel Fusion5
An Approach for Fast-Charging Lithium-Ion Batteries State of Health Prediction Based on Model-Data Fusion5
Promoting Effect of PbO on Ir Nanosurface Toward Ethanol Electrocatalytic Oxidation in Alkaline Media5
Fault Detection of Single Cell Battery Inconsistency in Electric Vehicle Based on Fireworks Algorithm Optimized Deep Belief Network5
In Situ Synthesis of Nano PtRuW/WC Hydrogen Evolution Reaction Catalyst for Acid Hydrogen Evolution by a Microwave Method5
Chromium Poisoning Mitigation Strategy in Strontium-Doped Lanthanum Manganite-Based Air Electrodes in Solid Oxide Fuel Cells5
Research on Mechanical Simulation Model and Working Safety Boundary of Large-Capacity Prismatic Lithium-Ion Battery Based on Experiment5
Smart Construction of Fe2O3 Nanowire Arrays on Carbon Cloth for Enhanced Supercapacitor and Lithium-Ion Battery4
Robust Passivity-Based Control Scheme for 1.26 KW Proton Exchange Membrane Fuel Cell Under Temperature and Load Variations4
A Hybrid Method for Lithium-Ion Batteries State-of-Charge Estimation Based on Gated Recurrent Unit Neural Network and an Adaptive Unscented Kalman Filter4
State-of-Charge Estimation of Ultracapacitor Based on H Infinity Filter Considering Variable Temperature4
Reviewer’s Recognition4
Macroscopic Architecture Design of Lithium Metal Electrodes: Impacts of Millimeter-Size Hollows on Economization, Cyclability, and Utilization4
A Review of Battery Thermal Management Methods for Electric Vehicles4
Controllable Dealloying of a Cu-Ga Alloy and Its Application as an Anode Material for Lithium-Ion Batteries4
A Modeling Study of RED-MED Salinity Gradient Heat Engine: The Conventional Scheme and a Modified Scheme4
High-Accuracy Battery State of Charge Estimation Strategy Based on Deep Belief Network Cascaded With Extended Kalman Filter4
A Review of Dispersion Film Drying Research4
Calendar Life Enhancement of Commercial Ultra-High-Rate LiFePO4/Graphite Batteries for Electromagnetic Launch4
Lithium Battery Thermal Management Based on Lightweight Stepped-Channel Liquid Cooling4
A Hybrid Convolutional Neural Network-Long Short Term Memory for Discharge Capacity Estimation of Lithium-Ion Batteries4
Mechanical Degradation on Defective Lithium-Ion Batteries4
Incorporation of Novel Graphene Nanosheet Materials as Cathode Catalysts in Li–O2 Battery4
A Simplified Fractional Order Modeling and Parameter Identification for Lithium-Ion Batteries3
Cycling-Induced Microstructural Changes in Alloy Anodes for Lithium-Ion Batteries3
One-Pot Pyrolysis to Nitrogen-Doped Hierarchically Porous Carbon Nanosheets as Sulfur-Host in Lithium–Sulfur Batteries3
Lithium-Ion Battery Health State Estimation Based on Feature Reconstruction and Optimized Least Squares Support Vector Machine3
Experimental and Simulations Study of Thermal Performance of Cell-to-Pack Structure for a Lithium-Ion Battery Pack3
Enhancement of the Carbon Content and Electrochemical Performance by Decorating Zinc Oxide Over Graphene Oxide/Polyaniline Composite3
In-Situ Visualization of the Transition Metal Dissolution in Layered Cathodes3
Emerging Investigators in Electrochemical Energy Conversion and Storage 20223
Lithium-Ion Battery State of Health Estimation Based on Improved Deep Extreme Learning Machine3
Combined Effects of Citric Acid and Ascorbic Acid Used As Low-Temperature Surface Modifiers to Enhance the Cyclability of Si Anode in an Li-Ion Battery3
Multi-Doped Interconnected Carbon Nanospheres for High-Performance Supercapacitor3
Supercapacitors Based on Spider Nest–Shaped Nickel Foam Electrodes Operating in Seawater3
Lithium-Ion Battery Capacity Prediction Method Based on Improved Extreme Learning Machine2
Improving the Electrochemical Performance of Lithium-Rich Cathode Materials by Vanadium and Titanium Co-Doping Using Solution Combustion Synthesis2
Remaining Useful Life Prediction of Lithium Battery Based on Sequential CNN–LSTM Method2
Analysis of Thermal Runaway Temperature Characteristics, Gas Composition, and Thermal Runaway Products of Semi-Solid Li(Ni0.6Co0.2Mn0.2)O2 Battery2
Enhanced the Stability and Storage Capability of Sulfide-Based Material With the Incorporation of Carbon Nanotube for High-Performance Supercapattery Device2
In Situ Grown CoMn-Based Metal–Organic Framework on Nickel Foam as Efficient and Robust Electrodes for Electrochemical Oxygen Evolution Reaction2
Corncob Derived Porous Carbon Anode for Long-Term Cycling in Low-Cost Lithium Storage2
Ab Initio Investigation of the Elastic Properties of CaxSn1−x Alloys for Use As Battery Anodes2
Supercapacitor Voltage Doubling Equalization Method Based on Adaptive Grouping2
Physicochemical Properties of N,N-Diethylethanolammonium Chloride/Ethylene Glycol-Based Deep Eutectic Solvent for Replacement of Ionic Liquid2
State of Charge and State of Health Estimation of Lithium-Ion Battery Packs With Inconsistent Internal Parameters Using Dual Extended Kalman Filter2
Smoothed Particle Hydrodynamics Modeling of Electrodeposition and Dendritic Growth Under Migration- and Diffusion-Controlled Mass Transport2
Development of a Computational Fluid Dynamics Simulation Framework for Aerothermal Analyses of Electric Vehicle Battery Packs2
Preparation of SiC-Coated Silicon Nanofiber/Graphite Composites as Anode Material for Li-Ion Batteries by the Chemical Vapor Deposition Method2
Effect of Annealing on the Defects and Morphology of Cu9S5: Implication for Advanced Electrode for Asymmetric Supercapacitors2
Experimental Investigation on the Concentration Polarization and Power Output of a Reverse Electrodialysis Stack With Permselective Spacers for Different Factors2
Interactions Between Solid Electrolyte Interphase and Lithium Dendrite2
Voltage-Mediated Enhances Lithium-Ion Storage in LiTiOPO4 by Combustion Method2
TiO2 Nanolayer–Coated Carbon as Pt Support for Enhanced Methanol Oxidation Reaction2
Design Strategies of Flame-Retardant Additives for Lithium Ion Electrolyte2
Investigation of Gradient Platinum Loading and Porosity Distribution for Anion Exchange Membrane Fuel Cells2
Research on the Mechanism of Cathode Failure of Lead-Acid Battery Under Extreme Conditions2
Development of Boron-Containing Electrolyte Additive for Lithium-Ion Batteries2
Analysis on Electrochemical CO2 Reduction by Diamond Doping Technology2
Lithium-Ion Power Battery Grouping: A Multisource Data Fusion-Based Clustering Approach and Distributed Deployment2
Optimization on Composition and Structure of Catalyst Layer for High-Temperature Polymer Electrolyte Membrane Fuel Cells2
Study on the Preparation of High Intrinsic Conductivity Perovskite Li0.33La0.56TiO3 Solid-State Electrolyte by Systematic Process Optimization2
Study of Influences on the Direct Electrolysis of Silica in Molten Salt: Particle Size, Temperature, Time, and Voltage2
Experimental Investigation and Controllability Study of Electrochemical Actuators Based on Si/CNTs Composite Material2
A High-Ceramic-Loading LATP–PVDF–Al2O3 Composite Film for Lithium-Ion Batteries With Favorable Porous Microstructure and Enhanced Thermal Stability2
Components Used in Microbial Fuel Cells for Renewable Energy Generation: A Review of Their Historical and Ecological Development2
Mechanical Properties of Prismatic Li-Ion Batteries—Electrodes, Cells, and Stacks2
Preparation and Characterization of Red Mud Modified Chitosan-PVA Composite Membrane for Direct Methanol Fuel Cell2
Internal Short Circuit and Dynamic Response of Large-Format Prismatic Lithium-Ion Battery Under Mechanical Abuse2
Dynamic Loading for Solid Oxide Stacks Under Limited Actuation2
Numerical Analysis on Influence of Double-Sided 3D-Patterned Cathode Catalyst Layers on Polymer Electrolyte Fuel Cell Performance2
Reactive Force Field (ReaxFF) and Universal Force Field Molecular Dynamic Simulation of Solid Electrolyte Interphase Components in Lithium-Ion Batteries1
Optimization of Electrode Manufacturing Processes From the Perspective of Mechanical Properties1
Exploring the Use of Fe2.5Ni2.5Sn3 as a Monolithic Catalyst for Oxygen Evolution Reaction Under Alkaline Conditions1
A Hybrid Data-Driven Method Based on Data Preprocessing to Predict the Remaining Useful Life of Lithium-Ion Batteries1
Research on Two-Level Equalization Strategy of Lithium-Ion Battery Based on Graph Theory1
Surface Coating Modification of Cathode Material for Long-Term Stable All-Solid-State Batteries1
Numerical Investigation of a Vapor Chamber-Assisted Liquid Cooling System for Cylindrical Battery Thermal Management1
Ultrasound-Enabled Adaptive Protocol for Fast Charging of Lithium-Ion Batteries1
Effects of Cooling System Boundary Conditions on the Performance of Proton Exchange Membrane Fuel Cell: A Comprehensive Analysis1
Effects of Sintering Temperature on the Electrical Performance of Ce0.8Sm0.2O1.9–Pr2NiO4 Composite Electrolyte for SOFCs1
Thermal Runaway Characteristics of Ni-Rich Lithium-Ion Batteries Employing Triphenyl Phosphate-Based Electrolytes1
Enhancing the Thermal Dissipation in Batteries via Inclusion of Central Heat Sink1
Zr0.1Fe0.9V1.1Mo0.9O7 as Cathode for Lithium-Ion Battery1
Improved Interfacial Property of Na3V2(PO4)3@C Cathode: Application of NaODFB-Based Ether Electrolyte in Sodium-Ion Batteries1
An Inconsistency Fault Diagnosis Method for Lithium-Ion Cells in the Battery Pack Based on Piecewise Dimensionality Reduction and Outlier Identification1
Functional Cathode Coatings of LiH2PO4 and LiTi2(PO4)3 for Solid-State Batteries1
Long-Life Na3V2(PO4)3||Graphite Energy Storage Device Enabled via Regulating the Area Density of Anode1
Mo-Doped SnO2 Quantum Dots Dispersed Over Reduced Graphene Oxide Sheets as an Efficient Anode Material1
Effect of SiO2 Coating on Microstructure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material1
Nano-Graphite-Doped Spartina alterniflora-Based Hard Carbon as High Performance Anode for Sodium-Ion Batteries1
Balancing Method of Retired Battery Pack Based on Variable Domain Fuzzy Control1
A Comparative Analysis on Thermal Stability of Delithiated Nickel-Rich LiNi0.8Co0.15Al0.05O2 and LiNi0.8Co0.1Mn0.1O2 in Pouch Cells1
Influence of Electrode Parameters on the Performance Behavior of Lithium-Ion Battery1
Effect of Mn Substitution on the Structure and Hydrogen Storage Properties of La0.75Ce0.25Ni5−xMnx Alloy1
Nitrogen and Phosphorus Co-Doped Hard Carbon Materials as High-Performance Anode for Sodium Ion Batteries1
Energy Management of Hybrid Electric Vehicle Considering Battery and Fuel Cell Parameters Using Multi-Objective Optimization for Dynamic Driving Cycles1
State of Charge Estimation Algorithm Based on Fractional-Order Adaptive Extended Kalman Filter and Unscented Kalman Filter1
Computational Fluid Dynamics-Based Numerical Analysis for Studying the Effect of Mini-Channel Cooling Plate, Flow Characteristics, and Battery Arrangement for Cylindrical Lithium-Ion Battery Pack1
Impedance-Based Performance Analysis of Micropatterned Polymer Electrolyte Membrane Fuel Cells1
Developing Potential Energy Surfaces for Graphene-Based 2D–3D Interfaces From Modified High-Dimensional Neural Networks for Applications in Energy Storage1
Improving the Discharge Characteristics of Nonaqueous Lithium-Oxygen Batteries by Constructing Microchannels1
Efficient Extraction of Mn2+ Ions From the Waste Produced in the Hummers Method for Application in Li-Ion Batteries1
A Fast Screening and Recombinant Method Based on Short-Time Pulse Discharge and Electrochemical Impedance Spectroscopy for Decommissioned Power Batteries1
Combining Multi-Indirect Features Extraction and Optimized Gaussian Process Regression Algorithm for Online State of Health Estimation of Lithium-Ion Batteries1
X-Ray Induced Chemical Reaction Revealed by In Situ X-Ray Diffraction and Scanning X-Ray Microscopy in 15 nm Resolution1
Thermal and Air Management of an Open Cathode Proton Exchange Membrane Fuel Cell Using Sliding Mode Control1
A Novel Heat Generation Acquisition Method of Cylindrical Battery Based on Core and Surface Temperature Measurements1
Comparison-Transfer Learning Based State-of-Health Estimation for Lithium-Ion Battery1
A Multi-Source Data Feature Fusion and Expert Knowledge Integration Approach on Lithium-Ion Battery Anomaly Detection1
A Screening Method for Retired Lithium-Ion Batteries Based on Support Vector Machine With a Multi-Class Kernel Function1
A Fault Diagnosis Method for Electric Vehicle Lithium Power Batteries Based on Dual-Feature Extraction From the Time and Frequency Domains1
0.060879945755005