OOIR: Observatory of International Research

Papers

(The median citation count of ACS Biomaterials Science & Engineering is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-10-01 to 2025-10-01.)

Article	Citations
Preparation of Magnetic Hydrogel Microparticles with Cationic Surfaces and Their Cell-Assembling Performance	186
Surface-Engineered Umbilical Cord Mesenchymal Stem Cell-Derived sEVs for Targeted Therapy of Osteoarthritis	180
Biomolecule Conjugation Strategy for HAGM Cryogels to Create 3D Immune Niches that Induce Multifunctional T Cells	159
Zeolites with Divalent Ions as Carriers in the Delivery of Epigallocatechin Gallate	154
Yeast Cell Wall-Mediated Ileal Targeted Delivery System for IgA Nepharopathy Therapy	138
Biodegradable Fiducial Markers for Bimodal Near-Infrared Fluorescence- and X-ray-Based Imaging	128
Macrophage-Mediated Liquid Metal Nanoparticles for Enhanced Tumor Accumulation and Inhibition	115
Long-Term Effects of Nanoscale Magnetite on Human Forebrain-like Tissue Development in Stem-Cell-Derived Cortical Spheroids	113
Sensitivity and Validation of Porous Membrane Electrical Cell Substrate Impedance Spectroscopy (PM-ECIS) for Measuring Endothelial Barrier Properties	112
Droplet Microfluidics-Based Fabrication of Monodisperse Poly(ethylene glycol)-Fibrinogen Breast Cancer Microspheres for Automated Drug Screening Applications	110
High-Strength Collagen-Based Composite Films Regulated by Water-Soluble Recombinant Spider Silk Proteins and Water Annealing	97
Transcriptional Response of Candida albicans to Nanostructured Surfaces Provides Insight into Cellular Rupture and Antifungal Drug Sensitization	95
Low-Temperature Synthesis of Hollow β-Tricalcium Phosphate Particles for Bone Tissue Engineering Applications	82
Human Hair Keratin-Based Hydrogels in Regenerative Medicine: Current Status and Future Directions	81
Reactive Oxygen Species-Responsive Hydrogel Microspheres Loaded with Epigallocatechin Gallate for Effective Osteoarthritis Therapy	80
3D-Printed Porous Tantalum Scaffold Improves Muscle Attachment via Integrin-β1-Activated AKT/MAPK Signaling Pathway	78
Bioactive Dental Resin Composites with MgO Nanoparticles	76
Surface Area of Graphene Governs Its Neurotoxicity	75
Thermosensitive Biodegradable Hydrogels for Local and Controlled Cerebral Delivery of Proteins: MRI-Based Monitoring of In Vitro and In Vivo Protein Release	74
Additively Manufactured Multilevel Voronoi-Lattice Scaffolds with Bonelike Mechanical Properties	72
Nanomaterials-Based Hybrid Bioink Platforms in Advancing 3D Bioprinting Technologies for Regenerative Medicine	71
Carbon Dots for Multiuse Platform: Intracellular pH Sensing and Complementary Intensified T1–T2 Dual Imaging Contrast Nanoprobes	69
Multifunctional Drug- and AuNRs-Loaded ROS-Responsive Selenium-Containing Polyurethane Nanofibers for Smart Wound Healing	68
Hep3Gel: A Shape-Shifting Extracellular Matrix-Based, Three-Dimensional Liver Model Adaptable to Different Culture Systems	66
Inflammatory Licensed hMSCs Exhibit Enhanced Immunomodulatory Capacity in a Biomaterial Mediated Manner	66

Atomic Layer Deposition of Tantalum Oxide Films on 3D-Printed Ti6Al4V Scaffolds with Enhanced Osteogenic Property for Orthopedic Implants	59
Temperature-Controlled pNIB/PTX Micelles for Improved Paclitaxel Delivery in Ovarian Cancer Treatment	59
Engineering Thermo/pH-Responsive Lactoferrin Nanostructured Microbeads for Oral Targeting of Colorectal Cancer	58
Issue Publication Information	57
Issue Editorial Masthead	55
Rapid Correction of the Hypoglycemia State in Nonhuman Primates Using a Glucagon Long-Dissolving Microneedle Patch	52
Injectable Hyaluronic Acid-Based Hydrogels for Rapid Endoscopic Submucosal Dissection	52
Three-Dimensional Tendon Scaffold Loaded with TGF-β1 Gene Silencing Plasmid Prevents Tendon Adhesion and Promotes Tendon Repair	51
Recent Advancements in Ultrasound Contrast Agents Based on Nanomaterials for Imaging	51
Mimicking the Gastrointestinal Mucus Barrier: Laboratory-Based Approaches to Facilitate an Enhanced Understanding of Mucus Permeation	50
Bioengineering Approaches for the 3D Blood–Retinal Barrier: Disease Modeling and Drug Development	50
Recent Progress in Electrospun Nanofiber-Based Degenerated Intervertebral Disc Repair	50
Multiparametric Sensing of Outer Membrane Vesicle-Derived Supported Lipid Bilayers Demonstrates the Specificity of Bacteriophage Interactions	50
Artificial Intelligence-Based 3D Printing Strategies for Bone Scaffold Fabrication and Its Application in Preclinical and Clinical Investigations	50
Encapsulation of Cells in a Collagen Matrix Surrounded by an Alginate Hydrogel Shell for 3D Cell Culture	49
Single-Walled Carbon Nanotube Membranes Accelerate Active Osteogenesis in Bone Defects: Potential of Guided Bone Regeneration Membranes	49
N-Acetylation of Biodegradable Supramolecular Peptide Nanofilaments Selectively Enhances Their Proteolytic Stability for Targeted Delivery of Gold-Based Anticancer Agents	48
Emerging Technologies to Enhance Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells: Focus on Nanomaterials and Bioactive Compounds	47
Boosting Titanium Surfaces with Positive Charges: Newly Developed Cationic Coating Combines Anticorrosive and Bactericidal Properties for Implant Application	46
Nanoparticle-Based Drug Delivery Systems for Enhancing Bone Regeneration	46
Biomimetic Approaches for the Design and Fabrication of Bone-to-Soft Tissue Interfaces	46
Advances on Porous Nanomaterials for Biomedical Application (Drug Delivery, Sensing, and Tissue Engineering)	45
Ultrasonic Formation of Fe₃O₄-Reduced Graphene Oxide–Salicylic Acid Nanoparticles with Switchable Antioxidant Function	45
Hydrothermally Derived Green Carbon Dots from Broccoli Water Extracts: Decreased Toxicity, Enhanced Free-Radical Scavenging, and Anti-Inflammatory Performance	45
Integrated Multiplex Sensing Clear Aligner for In Situ Monitoring of Dental Enamel Demineralization	44
Control of Tissue Strain Is Essential for Enhanced Dermal Innervation in the Three-Dimensional Skin Engineering	44
Innervated Coculture Device to Model Peripheral Nerve-Mediated Fibroblast Activation	42
Mechanical Regulation of Mitochondrial Dynamics and Function in a 3D-Engineered Liver Tumor Microenvironment	41
Polyurethanes and Their Biomedical Applications	41
Surface Topography Has Less Influence on Peri-Implantitis than Patient Factors: A Comparative Clinical Study of Two Dental Implant Systems	41
Enhanced Mandibular Bone Repair Using Poly Lactic-co-glycolic Acid Combined with Nanohydroxyapatite Scaffold Loaded by Mesenchymal Stromal/Stem Cells and Curcumin in Male Rats	41
Fluorescent Hybrid Material Based on Natural Spider Silk and Carbon Dots for Bioapplication	41
Strategy of Stem Cell Transplantation for Bone Regeneration with Functionalized Biomaterials and Vascularized Tissues in Immunocompetent Mice	40
A Generative Adversarial Network Approach to Predict Nanoparticle Size in Microfluidics	39
Antifibrotic Function of Itaconate-Based Degradable Polyester Materials	39
The Influence of Feeder Cell-Derived Extracellular Matrix Density on Thymic Epithelial Cell Culture	39
3D-Printed PEG–PLA/Gelatin Hydrogel: Characterization toward In Vitro Chondrocyte Redifferentiation	39
3D-Printed Cell-Instructive Scaffolds Based on Chondrosia reniformis Collagen and Sr-Doped Calcium Phosphates for Bone Tissue Engineering	39
Tailoring the Self-Assembly of Steviol Glycoside Nanocarriers with Steroidal Amphiphiles	39
Omentum Extracellular Matrix-Silk Fibroin Hydroscaffold Promotes Wound Healing through Vascularization and Tissue Remodeling in the Diabetic Rat Model	39
Mechanical Factors Regulate Annulus Fibrosus (AF) Injury Repair and Remodeling: A Review	39
Polylysine Derivatives with a Potent Antibacterial Ability for Effectively Treating Methicillin-Resistant Staphylococcus aureus-Induced Endophthalmitis	38
Sorafenib Encapsulated Poly(ester amide) Nanoparticles for Efficient and Biosafe Prostate Cancer Therapy	38
The Effect of Antibacterial-Osteogenic Surface Modification on the Osseointegration of Titanium Implants: A Static and Dynamic Strategy	37
Rational Design and Antimicrobial Potency Assessment of Abaecin Analogues	37
Silk Fibroin-Based Hydrogel Microneedles Deliver α-MSH to Promote Melanosome Delivery for Vitiligo Treatment	37
Ultrasound-Targeted Microbubble Destruction-Mediated Cell-Mimetic Nanodrugs for Treating Rheumatoid Arthritis	36
One-Pot Assembly of Drug-Eluting Silk Coatings with Applications for Nerve Regeneration	36
Cytotoxicity of AuCu–Cu₂S Nanocomposites: Implications for Biological Evaluation of the Nanocomposite Effect on Bombyx mori Silkworms and Cell Lines	36
Antiretroviral (ARV) Properties Dictate Long-Acting Release and Tissue Partitioning Behaviors in Multidrug Subcutaneous Implants	36

Fabrication of Novel 3-D Nanocomposites of HAp–TiC–h-BN–ZrO₂: Enhanced Mechanical Performances and In Vivo Toxicity Study for Biomedical Applications	35
Influence of Molecular Structures of Organic Foulants on the Antifouling Properties of Poly(2-methoxyethyl acrylate) and Its Analogs: A Molecular Dynamics Study	35
Hydrogel-Bondable Asymmetric Planar Membranes with Hierarchical Pore Structures for Cell Scaffolding and Encapsulation	35
Using Microfluidics to Align Matrix Architecture and Generate Chemokine Gradients Promotes Directional Branching in a Model of Epithelial Morphogenesis	35
Recognition of 3D Chiral Microenvironments for Myoblast Differentiation	34
Nucleotide Messenger Signaling of Staphylococci in Responding to Nitric Oxide – Releasing Biomaterials	34
Electrospinning Recombinant Spider Silk Fibroin-Reinforced PLGA Membranes: A Biocompatible Scaffold for Wound Healing Applications	34
Purified Astragalus Polysaccharide Combined with Inactivated Vaccine Markedly Prevents Infectious Haematopoietic Necrosis Virus Infection in Rainbow Trout (Oncorhynchus mykiss)	34
Influence of Simvastatin and Pravastatin on the Biophysical Properties of Model Lipid Bilayers and Plasma Membranes of Live Cells	34
High-Throughput Microfluidic Particle Counter Based on Optical Absorption	34
Oxidized Xanthan Gum Cross-Linked N−O Carboxymethyl Chitosan Hydrogel Promotes Spheroid Formation of Murine Fibroblast by Increasing Cell−Cell Interaction and Integrin αv Expression	33
Enhanced Degradability of the Apatite-Based Calcium Phosphate Cement Incorporated with Amorphous MgZnCa Alloy	33
Fabrication of 3D Polycaprolactone Macrostructures by 3D Electrospinning	33
Altered Cathepsin B Expression as a Diagnostic Marker of Skeletal Muscle Insulin Resistance in Type 2 Diabetes	33
Synchronized Improvements in the Protective and Bioactive Properties of Plasma-Electrolyzed Layers via Cellulose Microcrystalline	33
Aqueous Ionic Liquid Mixtures as Minimal Models of Lipid Bilayer Membranes	33
RETRACTED: Fabrication of Oro-Dispersible Sodium Valproate-Loaded Nanofibrous Patches for Immediate Epileptic Innervation	33
Engineering a Biomimetic In Vitro Model of Bruch’s Membrane Using Hagfish Slime Intermediate Filament Proteins	33
Modulating the Properties of Poly(glycerol sebacate)-Based Polyurethane Hydrogels Using an Organoclay	33
Use of Silk Fibroin Material Composites for Green, Flexible Supercapacitors	33
Advancements in Extracellular Matrix-Based Biomaterials and Biofabrication of 3D Organotypic Skin Models	32
Mechanical Stimulation of Equine Bone Marrow Mesenchymal Stromal Cell-Derived Cartilage-Like In Vitro Model Triggers Osteoarthritis Features	32
Surface Characteristics and Bone Biocompatibility of Cold-Sprayed Porous Titanium on Polydimethylsiloxane Substrates	32
l-Proline Enhanced Whole Ovary Cryopreservation by Inhibiting Ice Crystal Growth and Reducing Oxidative Stress	32
Designing Positionally Stable Smooth Breast Implants	32
A Synthetic Hydrogel with Tunable Stiffness for Engineering Pancreatic Cancer Organoids and Drug Testing	32
Injectable Hydrogel Containing Cowpea Mosaic Virus Nanoparticles Prevents Colon Cancer Growth	32
Compositional, Structural, and Biomechanical Properties of Three Different Soft Tissue–Hard Tissue Insertions: A Comparative Review	31
Fabrication of Curli Fiber-PEDOT:PSS Biomaterials with Tunable Self-Healing, Mechanical, and Electrical Properties	31
Facile One-Pot Method for All Aqueous Green Formation of Biocompatible Silk Fibroin-Poly(Ethylene Oxide) Fibers for Use in Tissue Engineering	31
Internal Water-Induced Acceleration, Chemical Pathways, and Contributing Factors in the Degradation of Poly(lactic-co-glycolic acid) (PLGA) Microparticles and Devices	31
Development of a Biomimetic Extracellular Matrix with Functions of Protein Sequestration and Cell Attachment Using Dual Aptamer-Functionalized Hydrogels	31
Synergistic Effects of Cerium and Hot Forging on Biodegradation, Antibacterial Properties, and In Vivo Biocompatibility of Microalloyed Mg–Zr–Sr Alloys	31
Fabrication of Multiscale, Multidirectional Orientated Collagen Hydrogels with Guided Cell Alignment Using Fluidics and a Three-Dimensional Printing	31
Antifreezing, Ionically Conductive, Transparent, and Antidrying Carboxymethyl Chitosan Self-Healing Hydrogels as Multifunctional Sensors	30
3D-Printed PCL Scaffolds Loaded with bFGF and BMSCs Enhance Tendon–Bone Healing in Rat Rotator Cuff Tears by Immunomodulation and Osteogenesis Promotion	30
Developing a Selection Framework for Zinc Ion-Based Biomaterial Design: Guided by the Biosafety Assessment of ZIF-8 and ZnO	30
Issue Editorial Masthead	30
SLS 3D Printing To Fabricate Poly(vinyl alcohol)/Hydroxyapatite Bioactive Composite Porous Scaffolds and Their Bone Defect Repair Property	30
Sandblasted/Acid-Etched Titanium Surface Modified with Calcium Phytate Enhances Bone Regeneration in a High-Glucose Microenvironment by Regulating Reactive Oxygen Species and Cell Senescence	30
Influence of Non-Cross-Linking AGEs on Mechanical Properties and Morphological Features of Tropocollagen Peptides: A Molecular Dynamics Study	30
Microfluidic Systems For Manufacturing of Microparticle-Based Drug-Delivery Systems: Design, Construction, and Operation	30
An In Situ UV Cross-Linking Asymmetric Adhesive Hydrogel for Noncompressible Hemostasis and Postoperative Adhesion Prevention	30
Fabrication of Flexible Electrochromic Devices with Degradable and Fully Recyclable Features	30
Zein/ZnO-Modified 3D-Printed PCL/Sphene Scaffolds with Improved Bacterial Inhibition and Osteoblast Activity for Bone Regeneration Applications	30
Dual Mg-Reinforced PCL Membrane with a Janus Structure for Vascularized Bone Regeneration and Bacterial Elimination	29
Issue Publication Information	29
Engineered DBCO+PD-1 Nanovesicles Carrying 1-MT for Cancer-Targeted Immunotherapy	29
Guiding Oligodendrocyte Progenitor Cell Maturation Using Electrospun Fiber Cues in a 3D Hyaluronic Acid Hydrogel Culture System	29
Layer-by-Layer Analysis of In Vitro Skin Models	29
On-a-Chip-Based Sensitive Detection of Drug-Induced Apoptosis in Polarized Gastric Epithelial Cells	29
RGDSP-Decorated Hyaluronate Hydrogels Facilitate Rapid 3D Expansion of Amylase-Expressing Salivary Gland Progenitor Cells	29
Multifaceted Engineered Biomimetic Nanorobots Toward Cancer Management	29
Cyclic Stretch Bioreactor Enhances Tenogenic Differentiation of MSCs in Biomimicked PCL-tdECM Membranes through Dynamic Mechanical Loading	29
Matrix Metalloproteinase-2-Responsive Surface-Changeable Liposomes Decorated by Multifunctional Peptides to Overcome the Drug Resistance of Triple-Negative Breast Cancer through Enhanced Targeting and	29
Micropatterned Styrene–Butadiene–Styrene Thin Films Doped with Barium Titanate Nanoparticles: Effects on Myoblast Differentiation	29
A Deep Learning Approach for Tracking Colorectal Cancer-Derived Extracellular Vesicles in Colon and Lung Models	28
Nanoparticle-Mediated Gene Therapy in Women’s Health: Progress, Delivery Challenges, and the Need for Sex, Age, and Ancestry Informed Design	28
Surface Self-Assembly Construction of Therapeutic Contact Lens with Bacterial “Kill-Releasing” and Drug-Reloading Capabilities for Efficient Bacterial Keratitis Treatment	28
Crossing Barriers: In Vitro Cancer Model for Studying Monocyte Migration across Endothelial Barriers	28
Damage Associated Molecular Patterns (DAMPs) Mediate the Foreign Body Response to Poly(ethylene glycol) Diacrylate Hydrogels via Toll like Receptors	28
Evaluating Breast Cancer Patient-Specific Metastasis Severity at Bone Site Using In Vitro Models	28
Preparation of Degradable and Transformable Core–Corona-Type Particles that Control Cellular Uptake by Thermal Shape Change	28
Recent Advancements in Near-Infrared Light-Propelled Nanomotors for Biomedical Applications	28
Correction to “Biomimetic Nanoscale Erythrocyte Delivery System for Enhancing Chemotherapy via Overcoming Biological Barriers”	28
Bio-Tribology and Corrosion Behaviors of a Si- and N-Incorporated Diamond-like Carbon Film: A New Class of Protective Film for Ti6Al4V Artificial Implants	28
A Perfluoropolyether Microfluidic Device for Cell-Based Drug Screening with Accurate Quantitative Analysis	28
CKIP-1-Loaded Cartilage-Affinitive Nanoliposomes Reverse Osteoarthritis by Restoring Chondrocyte Homeostasis	27
Advancing Bioactive Material for Mandibular Bone Regeneration: Transformation of Fibrous Mat into 3D Matrix Cotton for Enhanced Shape Retention and Rapid Hemostasis	27
Effect of Boron-Doped Mesoporous Bioactive Glass Nanoparticles on C2C12 Cell Viability and Differentiation: Potential for Muscle Tissue Application	27
Gelatin Microspheres Based on H8-Loaded Macrophage Membrane Vesicles to Promote Wound Healing in Diabetic Mice	27
Functionalized Decellularized Bone Matrix Promotes Bone Regeneration by Releasing Osteogenic Peptides	27
Microstructural and Micromechanical Properties of Decellularized Fibrocartilaginous Scaffold	27
Promoter Identification and Optimization for the Response of Lactobacillus plantarum WCFS1 to the Gram-Negative Pathogen-Associated Molecule N-3-Oxododecanoyl Homoserine Lactone	27
Engineered Liposomes in Interventional Theranostics of Solid Tumors	27
Bone-on-a-Chip: Biomimetic Models Based on Microfluidic Technologies for Biomedical Applications	27
Horseradish Peroxidase-Mediated Bioprinting via Bioink Gelation by Alternately Extruded Support Material	27
Phycocyanin/Hyaluronic Acid Microneedle Patches Loaded with Celastrol Nanoparticles for Synergistic Treatment of Diabetic Nephropathy	27
Shape Memory Polymer Bioglass Composite Scaffolds Designed to Heal Complex Bone Defects	27
Enhanced Vascular-like Network Formation of Encapsulated HUVECs and ADSCs Coculture in Growth Factors Conjugated GelMA Hydrogels	27

Piezoelectric PDMS/AlN Film for Osteogenesis in Vitro	27
Success Factors of Additive Manufactured Root Analogue Implants	27
Graph Network-Based Simulation of Multicellular Dynamics Driven by Concentrated Polymer Brush-Modified Cellulose Nanofibers	27
pH-Responsive Selenium Nanoplatform for Highly Efficient Cancer Starvation Therapy by Atorvastatin Delivery	26
Bioprinting in Microgravity	26
Nitric Oxide-Releasing Nanofibrous Scaffolds Based on Silk Fibroin and Zein with Enhanced Biodegradability and Antibacterial Properties	26
Application of the Interagency and Modeling Analysis Group Model Verification Approach for Scientific Reproducibility in a Study of Biomineralization	26
Partially Reduced MIL-100(Fe) as a CO Carrier for Sustained CO Release and Regulation of Macrophage Phenotypic Polarization	26
SARS-CoV-2 Spike Protein-Activated Dendritic Cell-Derived Extracellular Vesicles Induce Antiviral Immunity in Mice	26
Evaluation of the Immune Response to Chitosan-graft-poly(caprolactone) Biopolymer Scaffolds	26
Tumor Acidic Microenvironment-Responsive Promodulator Iron Oxide Nanoparticles for Photothermal-Enhanced Chemodynamic Immunotherapy of Cancer	26
Cellulose-Conjugated Copper-Oxide Nanoparticles for the Treatment of Ethanol-Induced Gastric Ulcers in Wistar Rats	26
Preparation of Hydroxyapatite-Aligned Collagen Sheets and Their Evaluation for Fibroblast Adhesion and Collagen Secretion	26
Periodontal Ligament Stem Cell-Derived Extracellular Vesicles Enhance Tension-Induced Osteogenesis	25
Orthotopic Transplantation of Functional Bioengineered Livers in Rats	25
Spiked Systems for Colonic Drug Delivery: Architectural Opportunities and Quality Assurance of Selective Laser Sintering	25
Engineered PLGA Nanoparticles for Brain-Targeted Codelivery of Cannabidiol and pApoE2 through the Intranasal Route for the Treatment of Alzheimer’s Disease	25
3D-Printed Stent-Like Polymeric Structures with Tunable Mechanical Properties and Ionic Conductivity for Reinforced Nerve Guidance Conduits	25
Stabilization and Sustained Release of Fragrances Using Silk-PEG Microspheres	25
Versatile-in-All-Trades: Multifunctional Boron-Doped Calcium-Deficient Hydroxyapatite Directs Immunomodulation and Regeneration	25
In Situ Simultaneous Detection of Surface Protein and microRNA in Clustered Extracellular Vesicles from Cancer Cell Lines Using Flow Cytometry	25
Shear Flow-Assembled Janus Membrane with Bifunctional Osteogenic and Antibacterial Effects for Guided Bone Regeneration	25
Activation of Dopamine Receptor D1 and Downstream Cellular Functions by Polydopamine	25
Integration of Microfluidic Devices with Microelectrode Arrays to Functionally Assay Amyloid-β-Induced Synaptotoxicity	25
Smart Hydrogel Sensors with Antifreezing, Antifouling Properties for Wound Healing	25
Intrinsic Dual-Emitting Carbon Quantum-Dot-Based Selective Ratiometric Fluorescent Mercaptopurine Detection	25
Advancing Dental Implant Design: A Comprehensive Study of Machining Parameters, Corrosion Behavior, and Microstructural Evaluation	25
Outer Membrane Vesicle–Cancer Hybrid Membrane Coating Indocyanine Green Nanoparticles for Enhancing Photothermal Therapy Efficacy in Tumors	25
Microfluidics for Nanomedicine Delivery	25
Fabrication of a Lignin-Copper Sulfide-Incorporated PVA Hydrogel with Near-Infrared-Activated Photothermal/Photodynamic/Peroxidase-like Performance for Combating Bacteria and Biofilms	25
Flexible, Suturable, and Leak-free Scaffolds for Vascular Tissue Engineering Using Melt Spinning	24
Kinetic Method of Producing Pores Inside Protein-Based Biomaterials without Compromising Their Structural Integrity	24
Simple Technique for Microscopic Evaluation of Active Cellular Invasion into 3D Hydrogel Constructs	24
Issue Publication Information	24
Functional and Structural Improvement of Engineered Cardiac Microtissue Using Aligned Microfilaments Scaffold	24
Nanoporous Carbon Immunosensor for Highly Accurate and Sensitive Clinical Detection of Glial Fibrillary Acidic Protein in Traumatic Brain Injury, Stroke, and Spinal Cord Injury	24
Disrupted Surfaces of Porous Membranes Reduce Nuclear YAP Localization and Enhance Adipogenesis through Morphological Changes	24
Imaging Oxygen Concentrations in Bone Scaffolds during Cellular Activity and Fluid Perfusion	24
Molecularly Imprinted Polymer Interface on Screen-Printed ZnO Nanorod Field Effect Transistors for Serotonin Detection in Clinical Samples	24
ECM Architecture-Mediated Regulation of β-Cell Differentiation from hESCs via Hippo-Independent YAP Activation	24
Anions, Not Cations, Drive Silk Stability and Self-Assembly: Insights from Regenerated Undegummed Silk	24
Decellularized, Heparinized Small-Caliber Tissue-Engineered “Biological Tubes” for Allograft Vascular Grafts	24
In Situ Bioprinting Enhances Bone Regeneration in a Live Animal Model with Craniofacial Defect	24
Recent Advances in Cardiac Patches: Materials, Preparations, and Properties	24
Issue Editorial Masthead	23
Polymer Lung Surfactants Attenuate Direct Lung Injury in Mice	23
A Pump-Free Strategy for the Controllable Generation of Alginate Microgels as Cellular Microcarriers	23
Stat3 Induces IL-10 and SR-A/CD204 Expression in Silica Nanoparticle-Triggered Pulmonary Fibrosis through Transactivation	23
Issue Publication Information	23
Open-Top Patterned Hydrogel-Laden 3D Glioma Cell Cultures for Creation of Dynamic Chemotactic Gradients to Direct Cell Migration	23
Issue Publication Information	23
Bioactive Decellularized Extracellular Matrix Hydrogel Microspheres Fabricated Using a Temperature-Controlling Microfluidic System	23
Reactive Cell Electrospinning of Anisotropically Aligned and Bilayer Hydrogel Nanofiber Networks	23
Impact of Silk-Ionomer Encapsulation on Immune Cell Mechanical Properties and Viability	23
Regulation of Hydroxyapatite Nucleation In Vitro through Ameloblastin–Amelogenin Interactions	23
Impact of Modified Triple Salt Monolayer Coating on Osseointegration of Endosteal Implants	23
Theranostic Activity of Ceria-Based Nanoparticles toward Parental and Metastatic Melanoma: 2D vs 3D Models	23
Evaluation of the Effect of Fibroblasts on Melanoma Metastasis Using a Biomimetic Co-Culture Model	23
Novel Biomimetic Collagen-Based Corneal Repair Material Achieved via a “Killing Two Birds with One Stone” Strategy Using Carboxymethyl-β-Cyclodextrin	23
Skeletal Muscle Spheroids as Building Blocks for Engineered Muscle Tissue	23
EDA Fibronectin Microarchitecture and YAP Translocation during Wound Closure	23
Development of Leather Fiber/Polyurethane Composite with Antibacterial, Wet Management, and Temperature-Adaptive Flexibility for Foot Care	22
Enhanced Immunogenic Cell Death by Apoptosis/Ferroptosis Hybrid Pathway Potentiates PD-L1 Blockade Cancer Immunotherapy	22
Cationic Hydrogels Modulate Neural Stem and Progenitor Cell Proliferation and Differentiation Behavior in Dependence of Cationic Moiety Concentration in 2D Cell Culture	22
Ovotransferrin Antibacterial Peptide Coupling Mesoporous Silica Nanoparticle as an Effective Antibiotic Delivery System for Treating Bacterial Infection In Vivo	22
Albumin Retains Its Transport Function after Interaction with Cerium Dioxide Nanoparticles	22
Emerging Roles of Graphitic Carbon Nitride-based Materials in Biomedical Applications	22
Fabrication Methods and Form Factors of Gellan Gum-Based Materials for Drug Delivery and Anti-Cancer Applications	22
Progress on Biomimetic Mineralization and Materials for Hard Tissue Regeneration	22
Coassembly of Fiber Hydrogel with Antibacterial Activity for Wound Healing	22
Stimuli-Responsive Polymer Coatings for the Rapid and Tunable Contact Transfer of Plasmid DNA to Soft Surfaces	22
Molecular Response to Nanopatterned Implants in the Human Jaw Bone	22
Fabrication and Characterization of a Porous TiO₂-Modified PEEK Scaffold with Enhanced Flexural Compliance for Bone Tissue Engineering	22
Recent Advances in Additive Manufacturing, Applications and Challenges for Dentistry: A Review	22
Developing a Flow-Resistance Module for Elucidating Cell Mechanotransduction on Multiple Shear Stresses	22
Design of Collagen and Gelatin-based Electrospun Fibers for Biomedical Purposes: An Overview	22
Injectable Self-Crosslinkable Thiolated Hyaluronic Acid for Stem Cell Therapy of Atopic Dermatitis	21
Piezo1 Mediates Glycolysis-Boosted Pancreatic Ductal Adenocarcinoma Chemoresistance within a Biomimetic Three-Dimensional Matrix Stiffness	21
Interleukin-4-Loaded Heparin Hydrogel Regulates Macrophage Polarization to Promote Osteogenic Differentiation	21
Bacteria-Responsive Drug Delivery System Utilizing Carboxymethyl Cellulose-Functionalized Metal–Organic Framework for Enhanced Antibacterial Efficacy	21
Cofunctionalization of Macroporous Dextran Hydrogels with Adhesive Peptides and Growth Factors Enables Vascular Spheroid Sprouting	21
Nanocomposite Conductive Bioinks Based on Low-Concentration GelMA and MXene Nanosheets/Gold Nanoparticles Providing Enhanced Printability of Functional Skeletal Muscle Tissues	21
Forming Single-Cell-Derived Colon Cancer Organoid Arrays on a Microfluidic Chip for High Throughput Tumor Heterogeneity Analysis	21
Safety and Biodistribution of Nanoligomers Targeting the SARS-CoV-2 Genome for the Treatment of COVID-19	21
Customized Heparinized Alginate and Collagen Hydrogels for Tunable, Local Delivery of Angiogenic Proteins	21
Microfluidic Formulation of Curcumin-Loaded Multiresponsive Gelatin Nanoparticles for Anticancer Therapy	21
Issue Editorial Masthead	21
Hierarchical Collagen/Apatite Co-assembly for Injection of Mineralized Fibrillar Tissue Analogues	21
Development of a Scaffold-on-a-Chip Platform to Evaluate Cell Infiltration and Osteogenesis on the 3D-Printed Scaffold for Bone Regeneration	21
Osteochondral Interface: Regenerative Engineering and Challenges	21
Data-Driven Sustainable In Vitro Campaigns to Decipher Invasive Breast Cancer Features	21
Enhanced Maturity and Functionality of Vascular Human Liver Organoids through 3D Bioprinting and Pillar Plate Culture	21
Quaternized Sodium Alginate-g-Ethyl-Oxazoline Copolymer Brushes and Their Supramolecular Networks via Hydrogen Bonding	21
Biomimetic Air-Lifted Organ Culture System with a Protective Coverage Membrane for Full-Thickness Corneal Preservation	21
Correlating Mechanical Properties and Sequence Motifs in Artificial Spider Silk by Targeted Motif Substitution	21