Journal of Materiomics

Papers
(The TQCC of Journal of Materiomics is 14. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Graphical Contents list161
Graphical Contents list146
Super-stable permittivity and low dielectric loss of (1-x)Na0.5Bi0.5+TiO3-xNaTaO3 ceramics within an ultra-wide temperature range136
Construction of hierarchical In2O3/In2S3 microsphere heterostructures for TEA detection119
Confinedly implanting Fe3O4 nanoclusters on MoS2 nanosheets to tailor electromagnetic properties for excellent multi-bands microwave absorption113
Size effects of polydopamine-coated BaTiO3 nanoparticles on the piezoelectric performance of P(VDF-TrFE)/BaTiO3 composite113
2D/1D CaIn2S4/TiO2 S-scheme heterojunction: In-situ hydrothermal synthesis and enhanced photocatalytic H2 evolution99
Tailoring nanocomposite membranes of cellulose acetate/silica nanoparticles for desalination83
Enhanced spatial charge separation and gas adsorption in Bi2WO6 facet junction for efficient visible light-excited gas detection at room temperature82
A freestanding ferroelectric thin film-based soft strain sensor79
Advancing MXene-based integrated microsystems with micro-supercapacitors and/or sensors: Rational design, key progress, and challenging perspectives77
Advancing piezoelectricity and excellent thermal stability: <001>-textured 0.75BF–0.25BT lead-free ceramics for high temperature applications77
XO (X = Ti, Mn) decorated hollow multi-channel carbon sub-micro fiber networks as freestanding cathode for Li S batteries69
Ion doping simultaneously increased the carrier density and modified the conduction type of Sb2Se3 thin films towards quasi-homojunction solar cell59
Oxygen vacancy migration and its lattice structural origin in A-site non-stoichiometric bismuth sodium titanate perovskites58
Graphical Contents list57
In-situ transformation of a perovskite oxide from irregular particles into nanosheets for active and durable solid oxide fuel cell cathodes55
Multifunctional silica aerogel-infused paint for self-cleaning and radiative cooling54
Phase transition mechanism and property prediction of hafnium oxide-based antiferroelectric materials revealed by artificial intelligence53
Environmentally regulated intrinsic oxygen-ion transport for oxide-ion conductors51
Exploration about superior anti-counterfeiting ability of Sm3+ doped KSr2Nb5O15 photochromic ceramics: Origin and atomic-scale mechanism49
Polarization rotation in high-performance KNN-based piezoceramics revealed by an in situ electric field pair distribution function48
One-dimensional core-sheath Sn/SnO derived from MAX phase for microwave absorption47
Boosting the piezoelectric property of relaxor ferroelectric single crystal via active manipulation of defect dipole polarization47
Enhanced piezoelectric properties and electrical resistivity in CaHfO3 modified BiFeO3BaTiO3 lead-free piezoceramics46
Recent progress on two-dimensional van der Waals thermoelectric materials with plasticity45
Hierarchically nanostructured nitrogen-doped porous carbon multi-layer confining Fe particles for high performance hydrogen evolution42
High corrosion-resistant silver nanowire/poly(3,4-ethylene dioxythiophene)/poly (styrene sulfonate)@nickel electrode for transparent electromagnetic shielding film42
Novel lead-free BCZT-based ceramic with thermally-stable recovered energy density and increased energy storage efficiency40
Prediction of nature of band gap of perovskite oxides (ABO3) using a machine learning approach40
Enhanced antiferroelectric-like relaxor ferroelectric characteristic boosting energy storage performance of (Bi0.5Na0.5)TiO3-based ceramics via defect engineering40
A flexible BiFeO3-based ferroelectric tunnel junction memristor for neuromorphic computing40
Editor corrections to “Influence of electrode contact arrangements on polarisation-electric field measurements of ferroelectric ceramics: A case study of BaTiO3” [J Materiomics 11 (2025) 100939]39
Graphical Contents list38
Synergistic effect of porous structure and gradient structure in carbon foam to boost terahertz absorption38
Enhanced electrical and mechanical properties of Bi2Te3-based thermoelectric thick films enabled by a practical dynamic regulation strategy38
Hard, strong, and tough cold-sintered α-quartz composites as high-performance structural ceramics37
Where can the low dielectric constant go in dense inorganic materials?37
Alkali cation intercalation manganese phosphate hydrate boosting electrochemical kinetics for pseudocapacitive energy storage36
Graphical Contents list36
Laser driven 2D heterostructure nanocomposite membranes with bimodal photothermal and photodynamic functions36
Quantifying structural distortion manipulation for desired perovskite phase: Part I. Paradigm demonstration in tungsten oxides36
Crafting very low frequency magnetoelectric antenna via piezoelectric and electromechanical synergic optimization strategy35
Antiferroelectric domain modulation enhancing energy storage performance by phase-field simulations34
Potassium tantalate niobate crystals: Efficient quadratic electro-optic materials and their laser modulation technology34
Large electrocaloric effect over a wide temperature span in lead-free bismuth sodium titanate-based relaxor ferroelectrics33
Multifunctional energy storage and photoluminescence of Er-modified KNN-based transparent ferroelectric ceramics33
Surface and structure engineering of MXenes for rechargeable batteries beyond lithium33
Photophysical properties of nitrogen-doped carbon quantum dots synthesized by graphite33
Ultra–low loss tangent and giant dielectric permittivity with excellent temperature stability of TiO2 co-doped with isovalent-Zr4+/pentavalent-Ta5+ ions33
Generative artificial intelligence and its applications in materials science: Current situation and future perspectives32
Graphical Contents list32
Enhancing room temperature electron mobility at high carrier concentration in transparent BaSnO3/La:BaSnO3/BaSnO3 heterostructures31
Ferromagnetic coupling in a two-dimensional Cairo pentagonal Ni2(TCNQ)2 lattice31
Superposition of bulk and interface electric field for boosting charge transfer in Bi2MoO6/Bi19Br3S27 S-scheme heterojunctions31
Intrinsic defects and the influences on electrical transport properties in quaternary diamond-like compounds: Cd2Cu3In3Te8 as an example31
Atomic-defect-suppressed pristine p-type Bi0.3Sb1.7Te3 as robust high-performance thermoelectrics for power generation and cooling30
Comprehensively improved energy storage and DC-bias properties in Bi0.5Na0.5TiO3NaNbO3 based relaxor antiferroelectric30
Nacre-mimetic alternating architecture of Ag SnO2 contact: Highly-efficient synergistic enhancement of in-situ self-repairing erosion resistance and naturally evolving impact resistance30
Highly aligned reduced graphene oxide in alumina composites for strengthening, toughening, and electromagnetic interference shielding29
Thermal anisotropy in chopped Cf reinforced SiC composites by laser printing and polymer infiltration-pyrolysis techniques29
Highly efficient synthesis of boron nitride nanotubes by catalytic chemical vapor deposition of boron/nickel containing precursors29
Friction constructing a capacity-compensation interlayer enabled the stable lithium metal batteries29
Ferroelectric-enhanced batteries for rapid charging and improved long-term performance28
Tunable natural resonances via synergistic effects of two phases in Fe (Co Ni1-)100- for multi-band microwave absorption28
Thermal stability of FeSi as barrier layer in high-performance Mg2Si0.3Sn0.7 thermoelectric device28
Electric field-induced photoluminescence quenching in Pr-doped BNT ceramics across the MPB region28
Inhibiting oxygen vacancies and twisting NbO6 octahedron in erbium modified KNN-based multifunctional ceramics27
Copper-nickel rubeanate metal-organic framework, a new highly stable and long active life nanocomposite for high-performance supercapacitors27
Influence of electrode contact arrangements on Polarisation-Electric field measurements of ferroelectric ceramics: A case study of BaTiO326
Defect promoted photothermoelectric effect in densely aligned ZnO nanorod arrays for self-powered position-sensitive photodetection26
Graphical Contents list26
Doping level effects in Gd/Cr co-doped Bi3TiNbO9 Aurivillius-type ceramics with improved electrical properties26
Significantly enhanced mechanical quality factor of acceptor-doped quadruple point composition in lead-free Ba(Zr,Ti)O3 ceramics26
Excellent piezoelectric constant and thermal stability in BiScO3–PbTiO3 piezoelectric ceramics via domain engineering26
Graphical Contents list26
Magnetic proximity effect and tunable valley splitting in 2D CrGeTe3/MTe2 (M = Mo, W) van der Waals heterostructures26
Low-cost Free-standing ferroelectric polymer films with high polarization produced via pressing-and-folding26
Polymer-based thermoelectric materials: A review of power factor improving strategies26
Double-side modification strategy for efficient carbon-based, all-inorganic CsPbIBr2 perovskite solar cells with high photovoltage25
Accurate and explainable machine learning for the power factors of diamond-like thermoelectric materials25
CuPbBi5S9 thermoelectric material with an intrinsic low thermal conductivity: Synthesis and properties25
Microwave/terahertz dielectric properties of high-Q willemite ceramics: Dual control through non-stoichiometric design and Ge4+ substitution25
An effective artificial layer boosting high-performance all-solid-state lithium batteries with high coulombic efficiency25
Facile and secure synthesis of porous partially fluorinated graphene employing weakly coordinating anion for enhanced high-performance symmetric supercapacitor24
Direct observation of phase transition in Hf0.5Zr0.5O2 thin films affected by top electrodes using in-situ STEM heating24
Highly efficient and wearable thermoelectric composites based on carbon nanotube film/polyaniline24
Realizing high thermoelectric performance in n-type Bi2Te3 based thin films via post-selenization diffusion24
Reliable Ge2Sb2Te5 based phase-change electronic synapses using carbon doping and programmed pulses24
Graphical Contents list23
MXenes and MXene-based composites for energy conversion and storage applications23
Component regulation and high-entropy engineering for enhanced antioxidant and high-temperature mechanical properties of protective films23
An engineering roadmap for the thermoelectric interface materials23
Facile synthesis of iron nickel cobalt ternary oxide (FNCO) mesoporous nanowires as electrode material for supercapacitor application23
Solution-processed quantum dot SnO2 as an interfacial electron transporter for stable fully-air-fabricated metal-free perovskite solar cells23
Remarkable average thermoelectric performance of the highly oriented Bi(Te, Se)-based thin films and devices23
Laser-driven composite ceramic enabling superhigh-luminance white light22
Mutual control of electric and magnetic orders near room temperature in Al doped Y-type hexaferrite single crystals22
Fabry–Pérot cavity smart windows with superior solar and thermal modulation capabilities22
Rattling effect mechanism on the temperature stability of low-sintered Ca1–(Li1/2Eu1/2) WO4 microwave dielectric ceramics for dielectric resonant antenna applications22
Beam-focused SH wave transducer based on YSr3(PO4)3 piezoelectric crystal for high temperature structural health monitoring22
Assessing structure of Mg3Bi2−Sb (0 ≤ x ≤ 2) at pressures below 40 GPa22
Shear stress-induced delamination method for the mass production of Ti3C2T MXene nanosheets22
Enhanced figure of merit for famatinite Cu3SbSe4 via band structure tuning and hierarchical architecture21
Heterostructure engineering of MoS2/Mo2CT nanoarray via molten salt synthesis for enhanced hydrogen evolution reaction21
Si3N4 nanowires@pyrolytic carbon nanolayers coupled with hydroxyapatite nanosheets as reinforcement for carbon matrix composites with boosting mechanical and friction properties21
MgF2 as abundant and environmentally friendly electrolytes for high performance electrochromic devices21
Single-phase La0.8Sr0.2Co1-Mn O3- electrocatalyst as a triple H+/O2-/e- conductor enabling high-performance intermediate-temperature water electrolysis21
Oxalic acid functionalization of BaTiO3 nanobelts for promoting their piezo-degradation organic contaminants21
Bond, vibration and microwave dielectric characteristics of Zn1-x(Li0.5Bi0.5)xWO4 ceramics with low temperature sintering21
Boron-10 stimulated helium production and accelerated radiation displacements for rapid development of fusion structural materials20
Machine learning approaches for permittivity prediction and rational design of microwave dielectric ceramics20
Influence of deposition temperature and precursor chemistry on the properties of atomic layer deposited Hf0.5Zr0.5O2 thin films20
Ultra-fast and linear polarization-sensitive photodetectors based on ReSe2/MoS2 van der Waals heterostructures20
Phase-modulated mechanical and thermoelectric properties of Ag2S1-xTex ductile semiconductors20
Clathrate structure of YB3C3 for high-performance thermoelectrics with superior mechanical properties20
Enhancement of the thermoelectric performance of half-metallic full-Heusler Mn2VAl alloys via antisite defect engineering and Si partial substitution19
Texture modulation of ferroelectric Hf0.5Zr0.5O2 thin films by engineering the polymorphism and texture of tungsten electrodes19
Self-assembling nanoarchitectonics of low dimensional semiconductors for circularly polarized luminescence19
In-situ construction of all-scale hierarchical microstructure and thermoelectric properties of (Sr0.25Ca0.25Ba0.25La0.25)TiO3/Pb@Bi composite oxide ceramics19
Ultra-low strain hysteresis in BaTiO3-based piezoelectric multilayer actuators via microstructural texture engineering19
Air atmosphere available fast one-pot synthesis of VO2 nanoparticles with excellent thermochromic properties by a novel liquid-shielding method19
Design of cobalt-based catalysts with the uniformly distributed core-shell structure for ultra-efficient activation of peroxymonosulfate for tetracycline degradation18
Controlled lattice deformation for high-mobility two-dimensional MoTe2 growth18
Unveiling the structure–activity relationships of tetracycline degradation by photocatalytic activation peroxymonosulfate of CuBi2O4 microspheres: DFT calculation and mechanism insight18
Entropy-driven multi-scale enhancement of energy storage performance in (Bi0.5Na0.5)0.5Ba0.5TiO3 ceramics18
Facile synthesis of a novel P-doped carbon coated nickel phosphides nanorods as sodium storage anode materials18
Ultrahigh energy storage density and efficiency in A/B-site co-modified silver niobate relaxor antiferroelectric ceramics18
Enhanced energy storage performance in Ag(Nb,Ta)O3 films via interface engineering18
Luminescent properties of Mg1.99SnO4:0.01Mn2+ phosphors doped with Zn2+18
Tailoring microwave dielectric properties of MgAl5/4(Li1/3Ti2/3)3/4O4 ceramics for multi-band dielectric resonant antenna18
Realizing ranged performance in SnTe through integrating bands convergence and DOS distortion18
Flexible multilayer lead-free film capacitor with high energy storage performances via heterostructure engineering18
Three-dimensional crosslinked nanoarchitectonics of CoP@NC anchored on Ti3C2T with high ionic diffusion and enhanced sodium storage performance17
Silver particle interlayer with high dislocation density for improving the joining of BaZr0.1Ce0.7Y0.1Yb0.1O3- electrolyte and AISI 441 interconnect17
Ultrahigh fill-factor all-inorganic CsPbBr3 perovskite solar cells processed from two-step solution method and solvent additive strategy17
Effective binding sufficiently-small SiO2 nanoparticles within carbon nanosheets framework enables a high-performing and durable anode for lithium-ion batteries17
Independent and complementary bio-functional effects of CuO and Ga2O3 incorporated as therapeutic agents in silica- and phosphate-based bioactive glasses17
Direct measurement of electrocaloric effect in P(VDF-TrFE-CFE) film using infrared imaging17
Engineering phase transition and ferroelectric properties in acceptor-doped HfO2/SrRuO3 thin-film heterostructures by a charge-balance synergistic strategy17
Ultra-high energy storage density and efficiency at low electric fields/voltages in dielectric thin film capacitors through synergistic effects17
Optimizing strain response in lead-free (Bi0.5Na0.5)TiO3-BaTiO3-NaNbO3 solid solutions via ferroelectric / (non-)ergodic relaxor phase boundary engineering16
MXenes: A comprehensive review of synthesis, properties, and progress in supercapacitor applications16
Graphical Contents list16
MgIn2S4/COF S-scheme heterostructure for improved photocatalytic H2O2 production under pure water and air16
Suppression of the surface roughness by adjusting the temperature distribution in the top-seeded solution growth of SiC crystal16
High recoverable energy density of Na0.5Bi0.5TiO3-based ceramics by multi-scale insulation regulation and relaxor optimization strategy16
Electro-elastic characteristics of KCsMoP2O9 crystal: Exploiting strong piezoelectricity for guided wave transducer applications16
Air-stable silicon hybrid solar cells constructed via hydrophobic polymer film16
Atmosphere-driven metal-support synergy in ZnO/Au catalysts for efficient piezo-catalytic hydrogen evolution16
Fully depleted vdW heterojunction based high performance photovoltaic photodetector16
Tetragonal (Ba, Ca) (Zr, Ti)O3 textured ceramics with enhanced piezoelectric response and superior temperature stability16
Simultaneously enhancing ionic conductivity and interfacial stability by Fe2O3 for solid-state sodium metal batteries16
Graphical Contents list16
Role of A-sites in pyrochlore lanthanide ruthenate for electrocatalysis of oxygen evolution reaction16
Enhancing thermoelectric performance of GeSb4Te7 single crystals through synergistic band and point defect engineering16
Self-monitored Nd-doped MoSe2 nanosheets with near-infrared luminescent sensing for photothermal therapy15
Anisotropic emission of orientation-controlled mixed-dimensional perovskites for light-emitting devices15
Temperature-insensitive KNN-based ceramics by elevating O-T phase transition temperature and crystal texture15
A flexible Hf0.5Zr0.5O2 thin film with highly robust ferroelectricity15
Thermal conductivity suppression in uranium-doped thorium dioxide due to phonon-spin interactions15
Pressure effects on the electrical transport and anharmonic lattice dynamics of r-GeTe: A first-principles study15
A strategy for enhancing luminescence thermometry via Ta5+-triggered K0.5Na0.5NbO3: Er3+ transparent ceramics15
Absorption-dominant EMI shielding performance of multiple folded Bi2Se3/PVDF nanocomposite films15
Radiation construction and excellent performances of Ag NPs/TiO2/PEG/PVP multifunctional aerogel: Adsorption-photocatalytic degradation, photosensitive antibacterial and cytotoxicity15
Realizing high thermoelectric performance for p-type SiGe in medium temperature region via TaC compositing15
Enhanced energy-storage performance in a flexible film capacitor with coexistence of ferroelectric and polymorphic antiferroelectric domains15
Can ChatGPT be used to generate scientific hypotheses?14
Maximizing the scattering of multiwavelength phonons in novel biphasic high-entropy ZrCoSb-based half-Heusler alloys14
Regulating energy storage performances of 0.85NaNbO3-0.15Bi(Zn2/3Nb1/3)O3 ceramics using BaTiO314
Mechanical alloyed FeCoNiMoM (M=Cr, Cu) high-entropy alloy powders as electrocatalysts for oxygen evolution reaction14
Thermal evolution effects on the properties of converting Cs-polluted soil into pollucite-base glass-ceramics for radioactive cesium immobilization14
Achieving excellent energy storage reliability and endurance via mechanical performance optimization strategy in engineered ceramics with core-shell grain structure14
Convenient synthesis of hollow tubular In2O3/PDA S-scheme inorganic/organic heterojunction photocatalyst for H2O2 production and its mechanism14
Graphical Contents list14
Doping strategy on improving the overall cathodic performance of double perovskite LnBaCo2O5+ (Ln=Pr, Gd) as potential SOFC cathode materials14
Unleashing the potential: SiO @GNs composites for superior lithium-ion battery anodes14
Particle packing theory guided multiscale alumina filled epoxy resin with excellent thermal and dielectric performances14
Fabrication of amorphous nanoporous ZrO2/SiO2 aerogel enabling nonlinear optical properties14
Sintering behavior, phase composition, microstructure, and dielectric characteristics of garnet-type Ca3Fe2Ge3O12 microwave ceramics14
Bismuthene quantum dots integrated D-shaped fiber as saturable absorber for multi-type soliton fiber lasers14
Enhanced thermoelectric performance of 3D-printed Bi2Te3-based materials via adding Te/Se14
Excellent energy storage properties realized in novel BaTiO3-based lead-free ceramics by regulating relaxation behavior14
Sr(Cr0.2Mn0.2Fe0.2Co0.2Ni0.2)O3: A novel high-entropy perovskite oxide with enhanced electromagnetic wave absorption properties14
Mg3(Bi, Sb)2-based thermoelectric modules towards near-room temperature cooling and power generation14
Boosting the energy harvesting performance of cantilever structured magneto-mechano-electric generator by controlling magnetic flux intensity on magnet proof mass14
0.098228931427002