Journal of Building Engineering

Article	Citations
Development of a methodology for studying microbiological contamination of office indoor air by analyzing air handling unit filters - Application to a low-energy building	259
A failure criterion of bond strength of corroded steel bars based on plasticity and limit analysis of concrete and the prediction model of shear capacity of beams based on CSCT and MCFT theories	257
Assessing the performance of infrared thermography and PIV methods to identify and characterize the air inlets and outlets in wall assemblies	211
Investigation of dynamic properties of tall buildings under super typhoon Mangkhut via Bayesian method	176
PDEM-based reliability assessment of RC frames against progressive collapse considering initial local failure	141
Bond of steel bars in S-PVA-HF concrete with different cooling methods after high-temperature exposure	137
Through-cracking risk and life-cycle performance of polymer-modified mortars under severe cold service conditions	127
Assessment of Mediterranean schools’ energy consumption and indoor environmental factors evolution through weighted Retrofit Potential Index in climate change scenarios	112
Lifetime seismic fragility analysis of long-span spatial structures considering the wind-induced fatigue effect	112
Advancing indoor environmental assessment through hotspot analysis	108
Study of seismic performance of reinforced concrete rocking columns	98
Editorial Board	97
Study on mold and condensation risks after vacancy of residential space with walls in contact with the ground	93
Development and performance evaluation of a novel anti-friction agent for H-beam extraction in soil mixing walls	93
Assessing the flexural fatigue life of engineered cementitious composites exposed to freeze-thaw cycles	89
Identifying configuration paths for effectively transferring knowledge to green building users —— from the online and offline transfer perspectives	88
Elastoplastic stability analysis of semi-rigid glulam reticulated shells with bolted joints and initial imperfections	87
Evaluation of characteristics of adhesion strength between wood flooring and finish mortar for prevention of construction defects	86
Seismic performance comparison between reinforced concrete frame structures with and without energy dissipating cladding panel system: Shaking table test and numerical simulation	86
Seismic behavior of slender prestressed reinforced concrete short-leg walls	85
Seismic behavior of composite shear walls with boundary columns using rectangular and U-shaped concrete-filled steel tubes	85
Cooling urban buildings with a combined meander EAHE–DEC system: Energy and water consumption analysis	85
Wall-frame interaction of steel plate shear wall strengthened by foam-infilled corrugated CFRP panel	84
Evaluation of a modular construction system in accordance with the Passivhaus standard for components	82
A hybrid forecasting method for cooling load in large public buildings based on improved long short term memory	82

Stress-strain characterization of wire and arc additively manufactured aluminium alloys using the Ramberg-Osgood model	82
Partially-restrained steel frame filled by RC infill walls with openings: Tests and numerical simulation	82
Static behavior of lattice angle steel-concrete composite columns subjected to eccentric compressive loads	81
Group effect and damage assessment for bolted glulam connection with slotted-in steel plates in tension	81
Development of a transient analytical method for multi-pipe earth-to-air heat exchangers with parallel configuration	80
The spatial and temporal variation characteristics and formation mechanism of the interfacial transition zone of cemented coal gangue backfill	78
Theoretical, numerical and experimental studies on thermal insulation performance of different cross laminated timber walls	77
Reliability assessment of unreinforced masonry buildings using fragility curves for collapse and non-collapse scenarios	76
An open-loop hybrid photovoltaic solar thermal evacuated tube energy system: A new configuration to enhance techno economic of conventional photovoltaic solar thermal system	75
Editorial Board	75
Spatial mechanical behavior and damage of traditional timber frames by fiber-based modelling of crossed floor beam-column joints	75
A statistical analysis of an innovative concept of Trombe Wall by experimental tests	75
Wind-induced fragility assessment of seismically isolated high-rise buildings: a comparative study of alongwind and crosswind effects	74
Investigation on the coupling nonlinear self-excited forces of high-rise buildings during VIV using the EKF-UI method	73
Benchmark problems in optimum structural design of 3D reinforced concrete frames	73
Enhancement effect of basalt fiber on the foamy kaolinite-based composite thermal insulator	72
Experimental analysis and simulation of a centrifugal jet fan for impulse ventilation systems	71
Advanced hybrid assessment of glazing systems: A comparative analysis using differential and global methods for precise thermal optimization and energy efficiency in building	71
Characterization of cement-based spacers for high performance concretes	71
Robustness of steel braced frame to resist disproportionate collapse caused by corner column removal	70
Deterioration analysis and expansion behavior prediction of electric arc furnace slag as fine aggregate in mortar	70
A synergistic in-situ polymerization and nanoengineering strategy enabling high deformability and piezoresistivity of cementitious composites	69
Effects of high-volume recycled powder from seawater-mixed construction waste on cement-based materials: strength, hydration kinetics, and microstructure	69
Compressive behavior of cold-formed steel with non-uniform sections: A case study on chord members	69
Monotonic testing of single shear-plane CLT-to-CLT joint with hardwood dowels	69
Optimization of economic air velocity for ventilation ducts using the GWO algorithm	69
Evaluation of flexural damage in PVA-ECC beams under different elevated temperatures	68
Influence of carboxymethyl cellulose functionalization on corrosion resistance of phytic acid conversion coatings applied to carbon steel in simulated concrete pore solution	67
Life-cycle impacts from environmentally friendly blocks	64
Computer vision-based intelligent elevator information system for efficient demand-based operation and optimization	63
Full-scale experimental study on the smoke descent and stratification in a two-storey building with varying ventilation conditions	63
The influence of aggregate phase on the electrochemical performance and corrosion behaviors of cementitious secondary anode within ICCP for reinforced concrete structures	63
Effects of structural parameters on cooling performance of radiative cooling panel	63
Experimental and numerical research on horizontal hysteretic performance of the typical Dou-gong based on an automatic contact pair generation strategy	62
IoT sensor system for monitoring thermal inertia and climate efficiency in a residential house with double leaf opaque facade	62
Micromechanical insights into high-ductility geopolymer composites incorporating red mud (RM): Role of in situ spherical RM-balls at the fiber-matrix interface	62
A compression molded non-sintered brick with high-volume untreated dredged marine sediment: design, properties, and forming mechanism	62
Fatigue performance and damage evolution of steel slag fine aggregate concrete with various slag contents under uniaxial compression	62
Axial tensile performance of grouted connection in staggered stacked steel modular structures: Experimental, numerical and theoretical analysis	62
Influencing mechanism of silica fume on early-age properties of magnesium phosphate cement-based coating for hydraulic structure	61
Mass flow characteristics of CO2 operating in a transcritical cycle flowing through a needle expansion valve in a direct-expansion solar assisted heat pump	61
A novel design of a unitized curtain wall with a timber only frame – Basic mechanical, moisture, and fire tests and hygrothermal simulations	61
Crowd management employing nudge theory for safe elevator use by masses of occupants during a high-rise building evacuation	61
Nondestructive detection of delamination in painted concrete structures through square pulse thermography	60
Mechanical and chemical effects of wet-dry cycling and UV exposure on flax textile reinforced recycled aggregate concrete: role of rice husk ash	59
Statistical evaluation of PCM plaster lining impact on indoor temperature fluctuation due to variability of outdoor temperature and solar radiation along a whole spring season	57
Investigation on the progressive collapse resistance of three-dimensional concrete frame structures reinforced by steel-FRP composite bar	56
Experimental study on optical properties of paraffin-based phase change material glazing units and their performance optimization based on NSGA-II	56
Experimental observations on factors influencing shear-thickening characteristics of cement-based materials	56
One-part geopolymer based on micronized sediments and fly ash mix: Mechanical, microstructural and leaching assessment	56

Dynamic energy cost prediction for industrial and commercial buildings using advanced machine learning and multi-pricing models	55
Leveraging ISO 7817 for BIM-driven sustainability assessments: The GLOIN framework	55
Feasibility and application of novel electrical curing method for constant-temperature hardening of concrete at cold regions	55
Study on the bond-slip mechanism between crescent ribbed rebar and recycled aggregate concrete: rib-scale simulation and theoretical analysis	55
Flexural reliability of corroded RC beams strengthened with CFRP sheets considering longitudinal corrosion non-uniformity of steel bars	54
Development of high-strength and durable coal char-based building bricks	54
Fluid grey 2: How well does generative adversarial network learn deeper topology structure in architecture that matches images?	54
Study on flexural property of cross-laminated timber prepared by Cunninghamia lanceolata	54
Pull-out strength of cast-in versus post-installed connectors in thin ultra-high performance concrete panels with polyoxymethylene fibers	53
Effects of M-value on long-term microstructural evolution of CSA cement blended with slag	53
Demountable connections for enhanced resilience: An analytical and numerical assessment of steel-concrete composite beams	53
Thermal transmittance of single and double stud LSF walls: Parametric study and simplified models	53
Synergistic effects of lithium slag and coarse limestone powder as supplementary cementitious materials: Hydration and microstructure	53
A MOPSO algorithm based on pareto dominance concept for comprehensive analysis of a conventional adsorption desiccant cooling system	52
Tensile performance of thread-fixed one-side bolted connections at high temperature	52
Study on the crack propagation behavior and failure characteristics of defective concrete based on acoustic emission technology	52
Thermal environment analysis and parameters optimization of a novel hot-air phase change heating bed	52
Estimating material intensity of mass timber products in contemporary tall timber buildings	52
Feasibility of hybrid waste fishing net textile and fiber reinforced cementitious composites in strengthening concrete and retrofitting damaged concrete	51
Thermal-mechanical behaviour of hollow section trusses during welding reinforcement under service loads	51
A novel oval-shaped coaxial ground heat exchanger for augmenting the performance of ground-coupled heat pumps: Transient heat transfer performance and multi-parameter optimization	51
Potential of desulfurized gypsum as a sulfate alternative in preparing solid waste-based limestone calcined clay cement (LC3) and its effects on early properties	51
Enhancing self-healing performance of microbial mortar through carbon fiber reinforcement: An experimental analysis	51
Mechanism and modeling of compressive strength development in low-heat cement paste	51
Design, fabrication and analysis of triply periodic minimal surface concrete units	50
Hydration mechanism and phase assemblage of blended cement with iron-rich sewage sludge ash	50
Experimental study on the working mechanism and seismic performance of novel energy-dissipation boxes with different configurations	50
Behaviour of fibre reinforced EPS lightweight concrete under dynamic splitting tension	50
Automated traffic core layout optimization in modular high-rise residential buildings using differential evolution	50
Performance enhancement of electrodialysis regeneration of deep eutectic solvent for liquid desiccant air conditioning systems	50
Fracture behavior and enhancement strategies for cement-based materials subjected to harsh environmental conditions: A review	50
Static performance of double-layer aluminium alloy gusset-type joints under in-plane and out-of-plane bending moments: a simplified modelling method	49
Analysis and optimization for configuration parameters of air source heat pump coupled with thermal energy storage system	49
Experimental tests and finite element analysis of the novel thick layer damping rubber bearings (TLDRB)	49
Limit state assessment of the relative displacement of a vertical pipe system connected with stainless-steel press joints	49
Microstructural and mechanical characterization of C-A-S-H: Experimental and molecular dynamics simulation study	49
Enhancing seismic resilience of precast shear walls using hybrid connections: Experimental investigation and numerical modelling	48
Multi-scale experimental study on the effect of crushed GFRP powder and dust on physical-mechanical properties of cement mortar	48
Study on the rheological properties and compressive strength mechanism of geopolymer cementitious materials for solid waste	48
Durability and microstructural evolution of metakaolin-based geopolymers under various coupled temperature and relative humidity conditions	48
Field test of PV-solar chimney to enhance natural ventilation in an exhibition hall: A case study	48
Fatigue damage evolution and assessment method of corroded weathering steel butt-welded joints	48
Evaluation of the long-term performance of the deep U-type borehole heat exchanger on different geological parameters using the Taguchi method	48
Investigation of vertical thermal stratification and stratified air conditioning load for large space with low-sidewall supply air based on vertical temperature node model	47
Experimental study on seismic performance of an innovative modular steel building connection with cross-shaped plug-in connector	47
Experimental evaluation of a two-stage indirect evaporative cooling system with heat pipe heat exchangers for hot and arid climates	47
A high water-cement ratio aerated concrete using carbon dioxide as the foaming agent: Mix design, pore structure and hydration products	47
Achieving energy efficiency and resilience to extreme heat through adaptive thermochromic coatings	47
Failure evolution analysis of end-plate connection joint based on structural stressing state theory	47
Robust design procedure for RC plates and shell structures using developed advanced sandwich model	47
Investigating the impact of operating parameters on the energy efficiency of evaporative precooling systems in data centers in hot and humid climates	46
Study on the recycling of ceramic polishing slag in autoclaved aerated foam concrete by response surface methodology	46
Dynamic response of steel-NC-UHPC sandwich composite panels under impact loading on the steel face: Experimental study and FE modelling	46
Chloride-induced corrosion patterns of reinforcements in simulated pore solutions of calcium sulfoaluminate cement concrete: An analytical study	46
Direct displacement-based design of steel-timber hybrid structure with separated gravity and lateral resisting systems	46
Modelling the driving forces of green retrofitting adoption in developing nations: A data-driven approach	46
Behavior of unconfined and polyethylene terephthalate (PET) FRP-confined coal reject concrete under compression	46
Recycling expanded shale ceramic powder as a sustainable cement replacement for marine concrete structures	46
Experimental study on bending fatigue properties of microcapsule self-healing cementitious composites	45
Bending behavior of a novel plug-in self-locking inter-module connection for modular steel buildings: Experimental and numerical studies	45
Optimizing the compressive strength of low-grade hydrous clay and copper slag‐based sustainable ternary blended geopolymer mortar	45
Prediction of self-healing ability of recurring cracks in Engineered Cementitious Composites with a machine learning based computational approach	45
Preparation and property analysis of shape-stabilized phase change material composite cement	45
Slip risk analysis on the surface of floors in public utility buildings	45
Circular construction system with reused RC components – compressive load-bearing capacity of subtractively processed dry joints	45
Impact of electrical heating on carbon textile reinforced concrete under freeze-thaw exposure	44
Mechanical and thermal properties of recycled coarse aggregate concrete incorporating microencapsulated phase change materials and recycled tire rubber granules and its freeze-thaw resistance	44
Optimization of calcium sources for enhanced performance of microbially-induced calcium carbonate precipitation (MICP)-modified recycled aggregate concrete	44
Modeling capillary water absorption behavior of concrete with carbonated surface layers	44
Dynamic compressive impact tests of building sandstone with a large split hopkinson pressure bar	44
Improving a shell-tube latent heat thermal energy storage unit for building hot water demand using metal foam inserts at a constant pumping power	44
Study on flexural behavior of BFRCM-autoclaved aerated concrete composite slabs: Effects of slab and strengthening thickness	44
Seismic vulnerability and fragility assessment of masonry structures within the historic centre of Meta (Naples, Southern Italy)	43
Tensile behavioral characteristics of lightweight carbon textile-reinforced cementitious composites	43
Production parameters of novel geopolymer masonry mortar in heritage buildings: Application in masonry building elements	43
Feasibility of underwater 3D printing: Effects of anti-washout admixtures on printability and strength of mortar	43
Influence in the mechanical properties and salt erosion resistance of recycled sand UHPC made from fly ash content	43
Numerical study on wake control of square cylinder based on vertical axis wind turbines	43
Insights into the influence of reinforcing iron bars corrosion on historical buildings: Towards optimizing limestone performance	43
Automated methods for indoor point cloud preprocessing: Coordinate frame reorientation and building exterior removal	43

Towards the system-based design of aluminium portal frames	42
Effects of different metabolic rates on thermal comfort in a warmer thermal environment	42
Mechanical investigations of the durability performance of sustainable self-compacting and anti-spalling composite mortars	42
Jute fiber-reinforced mortars: mechanical response and thermal performance	42
Torsional behaviour of concrete-filled square stainless steel tubular members for building structures: Testing, modeling and design	42
Acoustic emission study on the fracture process of fly ash-nano-metakaolin cement mortar under composite salt dry and wet cycles	42
Analysis and evaluation on seismic performance of the composite wallboard joints integrating thermal insulation and load bearing	42
Axial compressive performance of full-scale reinforced hollow high strength concrete-filled thin-walled square steel tubular columns	42
Finite element analysis of progressive collapse resistance of precast concrete frame beam-column substructures with UHPC connections	42
Assessing the influence of external curing on the early drying shrinkage of ultra-high-performance concrete	41
Seismic behavior of prefabricated lightweight steel composite frame-sandwich wall with enhanced border structure	41
Performance evaluation of automated data-driven feature extraction and selection methods for practical and scalable building energy consumption prediction models	41
Investigation on typhoon-induced aero-elastic response of membrane structures by wind tunnel test and numerical simulation	41
Normalized evaluation index of jet length and resistance for square diffuser shape optimization	41
Physics-guided neural network for structural seismic response reconstruction based on floor response spectra	41
A virtual sensor network for pressure distribution inside a multi-zone building based on spatial adjacency relationships and multivariate adaptive regression spline	41
Enhancing water resistance, improving corrosion behavior, and modifying properties of metakaolin geopolymer cement with trisodium citrate	41
Mechanical properties of novel green high-strength fly ash concrete incorporating hemp fibers	41
Axial compressive strength of sandwich steel plate shear wall with embedded corrugated plate	41
Nature-inspired optimization of weighted-feature ensemble model to predict the deflection of corroded reinforced concrete beam	41
Effect of printing parameters on extrudability and buildability of ultra-low carbon cementitious material	41
Application of expanded perlite immobilized microorganisms in cementitious materials	41
Effect of citrate retarders on the expansion property and hydration behavior of light-burned magnesia cement-based materials	41
The effect of cross-section morphology on the out-of-plane seismic behaviour of two-leaf masonry walls	41
Simulation analysis of Finnish residential buildings’ resilience to hot summers under a changing climate	41
Revaluation of occupancy duration for live load using big data of enterprise credit information	41
The preparation, property and hydration mechanism of ultra high performance concrete with metakaolin substitution for silica fume	41
A novel life cycle assessment methodology for transitioning from nZEB to ZEB. Case-study	41
Improving buildability of enclosed 3D concrete printed structures through a simulation-driven design approach	41
Experiment and optimization of a damping structure system with distributed multiple unidirectional single-particle dampers	41
Corrosion protection of steel bar enabled by monofluorophosphate-bearing composites with sustained-release capability	41
Application and impact of carrier systems and immobilization methods in microbial self-healing cement-based composites: A comprehensive review	40
Comparative study on the degradation of alkali-activated materials and cement paste exposed to coupled chloride-sulfate-magnesium attack	40
Three-dimensional laser scanning for large-scale as-built surveying of 2022 Beijing Winter Olympic Speed Skating Stadium: A case study	40
Utilisation of biomass and waste-derived ashes in the extrusion of fired clay bricks: mechanical properties, microstructure and leaching behaviour	40
Exploring wood micromechanical structure: Impact of microfibril angle and crystallinity on cell wall strength	40
Comparative study on the thermal and irradiation resistance performance of geopolymers and cement-based foamed materials	40
Association of indoor environment and adaptive behaviors with sleep quality: Seasonal and gender-specific variations in a tropical university setting	40
Comparative study on fragility and collapse resistance capacity of seismic isolation system of prefabricated frame structures	40
Structural behavior of self-compacting concrete-filled small square steel tube columns under concentric, eccentric, and flexural loads	40
Evaluation of biochar in cementitious pastes properties	40
Clarifying the role of aggregate characteristics in the rheological and mechanical properties of coal gangue aggregate concrete with a packing perspective	40
Effects of encapsulating cellulose acetate microfibers on the mechanical, thermal and environmental properties of geopolymers: A new solution to mitigate the cigarettes pollution	40
Electric vehicle-based distant energy sharing between zero-emission coastal office and hotel buildings	40
A deep reinforcement learning framework for multi-dimensional adaptability in building operations	40
Assessing the impact of evapotranspiration from green roofs on reducing surface temperatures	39
A novel ductile CHS knee bracing system for rehabilitation of earthquake-damaged buildings: The case of Sarpol-e-Zahab (Iran) earthquake	39
Fracture properties of bamboo fibrous composites: A systematic review	39
Relationship between chloride ion permeation resistance of ultra-high performance concrete and lightweight aggregate ratio	39
An evolutionary game model considering response priority for flexible resource scheduling in buildings	39
Numerical analysis of CLT shear walls using high-fidelity model: Connection to building system	39
Experimental study on the characteristics, rheological factors, and flowability of MK-GGBFS geopolymer slurry	39
Partially grouted masonry walls with different horizontal reinforcement types: North American-compliant experimental performance for low seismic risk areas	39
Effect of calcareous and siliceous aggregates on thermal stability and interfacial transition zone of alkali-activated fly ash-slag mortar under sub-high temperatures	39
Development and investigation of a self-centering cable brace with variable slip stiffness for braced frame structure	39
Unraveling concrete's interfacial transition zone vulnerability under erosive environments: A molecular dynamics study	39
Effectiveness of waterproofing methods and commercial chemicals against carbonation and transport properties after carbonation	39
Validating the Structural Timber Optimizer (STO): Simulation and experimental testing of a wall-like beam with Optimized Orientations under bending	39
Pre-treatment of BOF steel slag aggregates and effect on the mechanical and microstructure properties of alkali-activated mortars	39
Predictive modeling of carbon emissions in Jiangsu Province's construction industry: An MEA-BP approach	39
Multi-objective optimization of IoT-based green building energy system using binary metaheuristic algorithms	38
Additive manufacturing in construction using unmanned aerial vehicle: Design, implementation, and material properties	38
New insights into the effects of silicate modulus, alkali content and modification on multi-properties of recycled brick powder-based geopolymer	38
Effect of using wastewater from the ready-mixed concrete plant on the performance of one-part alkali-activated GBFS/FA composites: Fresh, mechanical and durability properties	38
Performance of 3D-printed UHPC optimized by particle packing model under standard and steam curing	38
Energy saving of vacuum-based membrane dehumidification with indirect evaporative cooling in a low sensible-heat-ratio building	38
Theoretical and experimental investigation on the seismic performance of a novel variable-damping viscous fluid damper	38
Noise from heating, ventilation, and air conditioning (HVAC) systems: A review of its characteristics, effects and control	38
Reactivity of olivine-derived amorphous silica and its potential for use as a supplementary cementitious material	38
Optimizing energy efficiency in multi-chiller systems: A comprehensive Modelica-based approach	38
Experimental and numerical investigation into the load-carrying capacity of aluminium alloy H-sectional stocky columns under axial compression	38
Seismic performance of reinforced concrete beams under freeze-thaw cycles	38
The impact of lighting on emotional responses in preschool children’ s visual environments	38
Static behavior of small-rib-height perfobond connectors embedded in UHPC: Experimental and analytical studies	38
Blast simulations of a reinforced concrete slab using the continuous surface cap model (CSCM)	38
The influence of indoor environmental factors on toluene uptake rate of a tube-type diffusive sampler	38
Out-of-plane impact behavior and post-impact damage evaluation of GFRP bar-reinforced concrete shear walls in fire	38
Recycling wind turbine blades: A comprehensive review of challenges, solutions, and future directions	37
Mechanical properties and microscopic characterization of coal-based synthetic natural gas slag as supplementary cementitious materials	37
Automatic crack detection and structural inspection of cultural heritage buildings using UAV photogrammetry and digital twin technology	37
Influence of low vacuum and high temperature condition on moisture transport and dry shrinkage of mature concrete	37
A novel damage constitutive model for high air-content hydraulic concrete in ultra-low temperature freeze-thaw and load coupling	37
Lightweight alkali-activated composites containing sintered fly ash aggregate and various amounts of silica aerogel	37
The fabrication and research of pH-responsive cement-based materials with switchable wettability	37
Delay in torsional failure of under-reinforced concrete beams subjected to combined shear, non-uniform bending, and torsion	37
Quantifying the earthquake-related carbon emissions of steel moment-resisting framed buildings and their sensitivity to modeling and design decisions	37
Development of ultrafine steel fiber graphite tailings conductive mortar: mechanical, electrical and electromagnetic wave absorption properties	37
Etna volcanic ash as new sustainable supplementary cementitious material	37
Activated clay and nanomaterial incorporated cement composite blends: A comprehensive review on reaction mechanism and performance	37
Cyclic shear loading test for grout-sleeve joints in precast concrete shear wall structure	37
Occupants’ behavioural diversity regarding the indoor environment in social housing. Case study in Northern Spain	37
Macro and micro damage and degradation mechanism of granite-concrete interface under acidic dry-wet cycles	37
Microstructure and mechanical properties of geopolymers utilizing excavated soils, metakaolin and slags	37
A holistic approach for solar-driven HVAC evaporative cooling system: Comparative study of dry and wet channel	36
Healing properties of residential balcony: Assessment of the characteristics of balcony space in Shanghai's collective housing	36