Journal of Energy Storage

Article	Citations
Modeling of solidification via Galerkin method within storage unit utilizing nano-powders incorporating unsteady source term	531
Editor's note for article entitled “Prediction of experimental thermal performance of new designed cold plate for electric vehicles' Li-ion pouch-type battery with artificial neural network”	527
Editorial note for “Phosphorene polymeric nanocomposites for electrochemical energy storage applications” [J. Energy Storage 69 (2023) 107940]	514
Editorial Board	453
Editorial Board	431
Expression of Concern for article entitled “Assessment of the effect of distance between lithium-ion batteries with a number of triangular blades, on the thermal management of the battery pack in a ch	427
Expression of Concern for article entitled “Combining an active method and a passive method in cooling lithium-ion batteries and using the generated heat in heating a residential unit”	422
Acceleration of heat discharge of composite lauric acid using magnetic dopant	363
Tuning the structures and conductivity of nanoporous TiO2―TiO films through anodizing electrolytes as LIB anodes with ultra-high capacity and excellent cycling performance	327
A review of salt mechanical behavior, stability and site selection of underground hydrogen storage in salt cavern-Moroccan case	327
Data-driven optimization of flow field design for redox flow batteries: A statistical framework	321
Enhancing the performance and economic efficiency of range-extended electric vehicles: A hybrid dual stream spectrum deconvolution neural network with Beluga Whale Optimization	305
A high-efficient method to upscale H2 migration within heterogeneous saline aquifers	285
Numerical optimization of lithium-ion cell performance using metaheuristic algorithms	278
Experimental and theoretical study on the rate of melting of phase change material upon heating	272
Quantification of concentration characteristics of hydrogen leakage in electro-hydrogen coupled system with different obstacles via Background Oriented Schlieren	272
Expression of Concern for article entitled “Investigation of the use of extended surfaces in paraffin wax phase change material in thermal management of a cylindrical lithium-ion battery: Applicable i	268
Electronic and structural disorder of NiCo2O4 nanostructures using phytochemicals from desert gourd offered efficient asymmetric supercapacitor and oxygen evolution reaction	265
Study on heat storage and release characteristics of a novel phase-change thermal energy storage device using microchannel parallel-flow flat pipes	259
Role of desalinated seawater groundwater recharge for seasonal energy storage	258
Operation strategy optimization of molten-salt-steam-generator targeted at load-following applications	257
Editor's Note for article entitled “Role of natural convection and battery arrangement for phase change material based battery thermal management unit”	251
Expression of Concern for article entitled “Battery thermal management systems based on nanofluids for electric vehicles”	250
Harnessing sustainable energy: Synthesizing a trinary chalcogenide semiconductor BaS:Sb2S3:CuS for enhanced performance in supercapacitor devices and electro-catalysis	247
Research on vanadium-chromium oxide Lithium-sulfur battery cathode materials derived from metal-organic frameworks on reduced graphene oxide aerogels	242

Design of an adaptive PDE boundary observer for a PEV fleet in V2G application	241
The intellectual property enabling gigafactory battery cell production: An in-depth analysis of international patenting trends	240
Metal hydride reactors and phase change materials: Enhancing energy storage for medium-high power vehicles	237
Nickel sulfide-nickel sulfoselenide nanosheets as a potential electrode material for high performance supercapacitor with extended shelf life	236
Fabrication of high energy density symmetric polyaniline/functionalized multiwalled carbon nanotubes supercapacitor device with swift charge transport in different electrolytic mediums	236
Energy storage sizing to mitigate clouds shading impact over solar photovoltaic off-grid pumping systems	226
A comprehensive modelling study of all vanadium redox flow battery: Revealing the combined effects of electrode structure and surface property	223
Techno-economic-environmental analysis of hybrid renewable energy system with lead acid and lithium-ion energy storage under different PV tracking orientations	220
Manganese/copper bimetal-decorated biomass porous carbons as advanced electrode materials for high-performance supercapacitors	219
High energy density of poly(vinylidene fluoride)-based all organic dielectric composites via using functional polymethacrylate filler	216
Prediction of the internal structure of a lithium-ion battery using a single ultrasound wave response	212
Effect of particle size on the thermal conductivity of organic phase change materials with expanded graphite	210
Theoretical and experimental study on improving diaphragm compressor design for hydrogen refueling stations through use of a free moving oil piston concept	208
N-doped porous carbon with directional oriented channel structure derived from biomass peach gum/poly(o-phenylenediamine) composite for high-performance supercapacitors	207
Atmospheric stability enhancement of borohydride-substituted sulfide solid electrolytes via porous silica incorporation	206
Nitrogen-modified spherical porous carbon derived from aluminum-based metal-organic frameworks as activation-free materials for supercapacitors	203
Rational design of nanocubic Fe3O4/FeP@C with heterostructure as advanced anode material towards enhanced lithium storage	202
Optimal power tracking for autonomous demand side management of electric vehicles	198
Preparation and characterization of highly efficient photothermal conversion and storage composites based on Cu2-xS	198
Towards ultra-wide voltage window (3.2 V) aqueous symmetric supercapacitors triggered by hybridizing FeNiCo oxides with Ni(pyrithione)2 on FeNi foam	198
Fabricating of N/O-codoping porous carbon interpenetrating networks for high energy aqueous supercapacitor	191
Performance study and optimization of battery thermal management system for integrated cooling/heating of cylindrical lithium-ion battery modules	189
State of health estimation embedded with hardware accelerator based on long short-term memory combined with Bayesian optimization considering extracted health indicator in charging conditions	188
Electrochemical properties of plasticized PVA-based electrolyte inserted with alumina nanoparticles for EDLC application with enhanced dielectric constant	187
Dual strategy of exposed active crystal facets and Mg/Fe/Ti co-doping in boosting the property of sodium-ion cathode material P2-NaNiMnO	186
The application of battery thermal management system based on heat pipes and phase change materials in the electric bike	186
Evaluating densification effects on sulfide-based electrolytes to examine an application in scalable solid-state battery manufacturing	185
Simultaneous and rapid estimation of state of health and state of charge for lithium-ion battery based on response characteristics of load surges	185
Non-layered KFeO2/KFe5O8 cathodes promoted by dual-phase crystal synergistic regulation strategies based on eutectoid transformation for potassium ion batteries	184
Melting control of phase change material of semi-cylinders inside a horizontal baffled channel: Convective laminar fluid–structure interaction	183
Study on heat transfer characteristics of directly buried casing energy storage body backfilled with phase change material	182
Stochastic power management strategy for an autonomous wind energy conversion system with battery storage under random load consumption using Markov process	181
Defect-engineered sulfur-doped carbon nanofibers derived from bacterial cellulose for high-rate sodium-ion storage	181
Corrigendum to “Temperature optimization for enhancing the electrochemical performance of covalent triazine frameworks composite with Nb-based Mxene in asymmetric supercapacitors and hydrogen producti	177
Exploring the threshold of Hf in ZrO2 for garnet-type Li7La3Zr2O12 solid electrolytes	177
Corrigendum to “Nickel-cobalt spinel-based oxygen evolution electrode for zinc-air flow battery” [J. Energy Storage 115 (2025) 115835–115848]	176
Multiscale structural engineering of Co0.85Se@porous carbon composite enables highly reversible lithium/sodium storage	175
Smart thermal phase change materials with switchable morphology	175
Editorial Board	173
Heat transfer and storage characteristics of a hexagonal close structured packed-bed thermal storage system with molten salt phase change materials	173
Dual-layer configuration optimization model of bypass branches for heat storage in district heating network	171
Biocompatible and electrolyte embossed wearable textile based supercapacitors from chitosan derived bio-ternary composites crafted fabric electrodes	170
Preface to the special issue on battery and energy storage devices: From Materials to eco-design	169
Thermal analysis of heat storage unit equipped with fins employing Galerkin approach	169
Three-dimensional MoS2/CNFs@C composites as anode materials for high-performance lithium-ion batteries	169
Multi-objective optimal design and performance analysis of a residential microgrid	162
InF3 initiated ionic/electronic conductive SEI for highly stable solid-state lithium sulfur batteries	162
Battery-like supercapacitor electrodes utilizing porous hierarchical bush-like ZnO/SnS on nickel foam framework	161
Sn-loaded carbon microspheres‑carbon nanofibers ternary composite materials as the negative electrode for vanadium redox flow battery	161
Building performance simulation of a photovoltaic façade enhanced with latent heat storage: Model validation and power generation prediction	160

Temperature-dependent strengthening mechanisms in Mn- and Si-alloyed low carbon ferritic steels for cylindrical battery case	160
The influence of inclination angles on thermal runaway characteristics and burning behavior of 18650 lithium-ion batteries	159
Breaking the thermal conductivity-latent heat trade-off via spatial decoupling for dual-function chip cooling	159
Energy storage-based voltage optimization and coordinated control for large-scale DPV AC/DC hybrid distribution networks	154
Optimal multi-market operation of gravity energy storage and wind power producer using a hybrid stochastic/robust optimization	154
Suppression elevated-temperature transition metal dissolution in LiNi0.5Mn1.5O4 cathode via a HF-resistant bis[3-(trimethoxysilyl)propyl]amine coating	153
Synergistic Co W alloy coatings: Corrosion-resistant electrodes with superior energy storage performance	152
A reduced order model for a lithium-ion 3D pouch battery for coupled thermal-electrochemical analysis	152
Preparation of carbon-based conductive slurry and its performance and role in energy storage field	150
Research on the low-temperature waste heat storage performance of a novel microencapsulated phase change material with a double-shell encapsulation of hexadecylamine	148
The propagation mechanism of supply risk in the global lithium battery industry chain from the perspective of nickel flow	147
Unveiling hidden effects of slurry mixing and interface engineering on carbon-based supercapacitor performance	146
Comparison assessment for the effect of porous media and phase change material on the performance of photovoltaic solar chimney	145
Recycling of anode active material from spent Li-ion batteries	144
Thermal and discharge characteristics of a double-pass solar air heater with integrated granite heat storage	144
Allocative approach to multiple energy storage capacity for integrated energy systems based on security region in buildings	144
Development and characterization of PVA-based nanocomposites with graphene and natural quartz nanoparticles for energy storage applications	143
Lifetime prediction of lithium-ion capacitors using electro-thermal-aging co-simulation platform	143
Multifunctional polymer electrolyte membrane networks for energy storage via ion-dipole complexation in lithium metal battery	143
Thermal, exergetic, and economic analysis of a conical solar still enhanced with black granite as a thermal storage medium	142
Lithium-ion battery capacity estimation from partial charging curves using adaptive high-information sampling and deep learning	141
Enhancing battery health estimation using model selection criteria-based genetic programming	140
Three-dimensional activated graphite paper for high-performance supercapacitors	140
Real-time outdoor experiment and performance analysis of dual-coil heat exchanger integrated thermal energy storage	140
Triethanolamine-modified binder with synergistic effects on Zn anode in improving the cycling stability of aqueous rechargeable Zn Ni batteries	139
Synergistic integration of polyaniline and biomass-derived carbon hybrids enabling dual-mechanism electrochemical energy storage	138
Mechanical modelling approach for the simulation of solid-state electrolytes	137
Coupled effects of corrugation and rotation on the phase transition and thermal process in a vented cavity under MHD convection	137
Sustainable approaches for performance enhancement of the double pass solar air heater equipped with energy storage system: A comprehensive review	136
Multi-scale synergistic estimation of state of charge and state of energy for lithium-ion batteries via seasonal-trend decomposition and hybrid neural networks	136
High electrocatalytic activities of electrochemically exfoliated graphene-oxide deposited carbon paper electrodes for vanadium redox flow batteries	135
Synergizing artificial intelligence and battery energy storage systems for a sustainable clean energy transition	134
Stable and reliable PEG/TiO2 phase change composite with enhanced thermal conductivity based on a facile sol-gel method without deionized water	134
Rational architecture design of dense graphene/MnO hybrid material for enhanced lithium-ion storage properties	133
Metric-based evaluation of electric vehicle battery immersion coolants	133
Aqueous zinc-ion batteries: Modification strategies and challenges for manganese-based oxide cathodes	133
CuGa2 transition phase anchored liquid GaSn achieves high-performance liquid metal battery cathode	132
Experimental study on an improved direct-contact thermal energy storage container	131
An efficient state-of-health estimation method for lithium-ion batteries based on feature-importance ranking strategy and PSO-GRNN algorithm	131
Single-ionic conductive quasi-solid-state electrolyte membranes based on nematic liquid crystal polymer network	131
Essential hydraulic aspects associated with the operation of underground pumped-storage hydropower plants	131
Numerical study of the melting rate enhancement of nano phase change material in a modified shell and tube heat exchanger	131
Room-temperature synthesis of ZnO-based quantum dots for enhanced electron/ion transport in ultra-stable hybrid supercapacitors	130
Thermal energy storage using nano phase change materials in corrugated plates heat exchangers with different geometries	130
Numerical investigation of a thermal energy storage system based on the serpentine tube reactor	130
Porous carbon prepared from long-term preserved concentrated paper mulberry juice with excellent electrochemical performance	130
A novel approach to modeling and experimenting a solar-fed H6 configuration for battery swapping stations in rural and commercial areas using a dual phase CLLC DC–DC resonant converter	130
Strain analysis and non-destructive monitoring of the two-stage hydraulic-driven piston compressor for hydrogen storage	130
Interfacial engineering via in situ Li K bimetallic alloy formation for high-performance solid polymer electrolyte lithium batteries	130
High-performance shape-stabilized phase change material modified by bio-based nano porous graphene for electro-to-thermal and solar-to-thermal conversion and storage	130
German atlas of Thermal Storage Power Plants (TSPP) - A first approach	129
Transfer learning-enabled deep learning framework for early thermal runaway prediction in lithium-ion energy storage batteries	128
Rechargeable non-aqueous lithium-O2 batteries: Novel bimetallic (Ni-Cu) conductive coordination polymer cathodes	128
Reliability assessment and improvement of distribution system with virtual energy storage under exogenous and endogenous uncertainty	128
In-situ polymerization gel composite electrolytes for high safety lithium metal batteries	127
Implementation of gas formation into a finite-element model for the mechanical swelling simulation of lithium-ion batteries	126
A fast-response preheating system coupled with supercapacitor and electric conductive phase change materials for lithium-ion battery energy storage system at low temperatures	125
Synergistic two-stage optimization for multi-objective energy management strategy of integrated photovoltaic-storage charging stations	125
Comparative LCA of energy and environmental impacts in sulfide-based all-solid-state battery manufacturing: Wet vs. dry processes	125
An integrated approach to rank prospective sites for wind-powered Pumped Storage Hydroelectric plants to meet rising demand in the Indian subcontinent	125
Experimental investigation of an alternative battery pack thermal management system	124
Graphene aerogel based positive electrode for lithium ion batteries	123
Core-shell structure ZnS@N-doped carbon composites for lithium storage	123
Unveiling the electrochemical threshold properties of novel aluminum‑copper bimetallic foils anodes for high reversibility li-ion batteries	123
Experimental studies on evacuated tube collector with in-built energy storage - Waste car engine oil as sensible heat storage medium	122
The higher the better? Thermal stability and electrochemical properties of Cl-rich lithium argyrodite solid state electrolyte	122
Improving the stability of ceramic-type lithium tantalum phosphate (LiTa2PO8) solid electrolytes in all-solid-state batteries	122
Screen-printed water-in-salt Al ion battery for wearable electronics	121
Construction and validation of ternary positive dry electrode simulation system	121
A porous polycaprolactone coating with abundant ester groups for stable Zn metal anodes	121
Battery energy storage systems' integration in Baja California Sur, Mexico: A long-term electrical grid assessment	120
Wind-storage combined system based on just-in-time-learning prediction model with dynamic error compensation	120
Construction of high performance aqueous asymmetric supercapacitor based on multi walled carbon nanotube/MgMn2O4 composite	120
Revealing bimetallic synergy in van der Waals AgInP2Se6 nanosheets for alkali metal ion battery electrodes	120
Enhanced ordered growth of Ni Co LDH nanosheets on N-doped carbon through nitrogen configuration tuning for high-performance asymmetric supercapacitors	119
Engineering mesoporous Na4Mn0.9Ni0.1V(PO4)3@NC microspheres cathode towards advanced sodium ion batteries	119
Synergistic band-gap enginee⁠ring and electrochemical performance of Cu1₋xZnxFe₂O₄ spinel ferrites synthesized via dual-fuel solution combustion for high-performance supercapacitors and alkaline elect	119
Mesoporous spherical Ni(OH)2@g-C3N4 hybrid heterostructures with amorphous shell as battery-type capacitive cathodes for enabling high-performance hybrid supercapacitors	119
N, O co-doped carbon nanosheets synthesized based on polydopamine in situ grown on C3N4 template for supercapacitors	119
Precisely tuning porosity and outstanding supercapacitor performance of phenolic resin-based carbons via citrate activation	119

A facile procedure to improve the performance of food-waste-derived carbons in sodium-ion batteries	118
Balancing defect chemistry and closed pores for enhanced dual-region sodium storage in hard carbon anodes	118
Assembly of high-performance zinc-ion hybrid capacitor using soy residue-derived porous carbon as cathode and HCl treated zinc foil as anode	118
Enhancing lithium-ion battery health with multi-stage constant voltage charging	118
A deep reinforced markov action learning based hybridized energy management strategy for electric vehicle application	118
π-Conjugated electrochemically stable covalent quinazoline network for lithium ion storage	118
Optimizing pumped storage hydropower for multiple grid services	117
A new state of charge prediction method for electric vehicles by an attention-based SAE-BiLSTM model: Analyzing driving styles and vehicle types with operational and environmental data	117
Analysis of alternating flux density harmonics inside the rotor of a 1 MW high-speed interior permanent magnet synchronous machine used for flywheel energy storage systems	117
Hollow silica spheres encapsulated with nitrogen-doped carbon frame as an anode for high performance Li-ion capacitor: Correlating experimental and theoretical studies	117
Fluorine-containing soluble polyimide binder improves the cycling performance of Si/C anode in lithium batteries	116
Cleaner production of energy and fuels from a renewable energy-based self-sufficient system with energy storage options	116
Multi-objective dispatch strategy for vehicle-to-grid enabled electric vehicles in renewable energy microgrids under diverse load scenarios	116
High valence tungsten doping enhances the lithium storage performance of high-voltage medium‑nickel low-cobalt layered oxide cathode	115
Power battery state of health estimation for real vehicle data using a novel multimodal architecture	115
Designing N-RGO and CNFs co-decorated NiS2 for high-efficiency hybrid supercapacitors with excellent energy density and cycling stability	115
Anti-freezing and non-flammable hydrogel membrane for high voltage supercapacitor electrolytes via rapid ionic crosslinking-phase inversion	115
Computational design of Y2AX (A = Al, Si, Ga, Ge; X = C, N) materials: Tailoring electronic and electrochemical properties for advanced energy storage applications	115
Machine learning-driven evaluation of constant resistance charge-discharge dynamics of electrochemically deposited spinel ZnFe2O4 pseudocapacitor electrode	115
Environmental and economic analysis of sector-coupling battery energy storage systems used for frequency containment reserve	115
Electric vehicle-based virtual inertia control of the microgrid load frequency control system using brain emotional learning	115
A physically cross-linked carboxymethyl cellulose/chitosan hydrogel electrolyte with high ionic conductivity for zinc-ion hybrid supercapacitors	114
Enhanced tripartite evolutionary game analysis of electric vehicle charging strategies based on power grid–load aggregator–electric vehicle interaction	114
Optimized fast-charging of lithium-ion battery packs via predictive-reinforcement hierarchical control framework	114
Corrigendum to “Research on the fuzzy proportional-integral-derivative control strategy of a hybrid battery thermal management system under different ambient temperatures” [J. Energy Storage, Volume 1	114
Planning and establishment of battery swapping station - A support for faster electric vehicle adoption	113
Advancements in sodium-ion batteries: An in-depth scientometric review	113
DFT investigation on sulfur-induced linear defects in MnCo2S4 for enhanced energy storage capabilities	112
Improving the solar-to-thermal conversion efficiency of bio-based balsawood/octadecane phase change composites via surface carbonization	112
Chrysanthemum flower-like copper molybdenum oxide decorated graphene oxide nanoribbon composite: A novel positive electrode material for asymmetric supercapacitor devices	111
A novel peak current mode phase-shift controller for green hydrogen energy storage systems using type-3 voltage loop compensator and overcurrent protection	111
State-of-charge estimation of lithium-ion batteries using a tree seed and genetic algorithm-optimized generalized mixture minimum error entropy-based square root cubature Kalman filter	111
Preparation, microstructural characteristics, and electrochemical properties of cobalt molybdate nanocomposites as electrode material for hydrogen storage	111
Hollow-sphere manganese-modified nickel MOF electrodes: Redefining energy storage potential for supercapacitor efficiency and durability	110
Proposal and performance evaluation of solar-coal hybrid power system integrated with thermal energy storages	110
A multi-objective techno-economic operation of distribution network considering reactive power support from renewable energy and battery storage system	110
Design and performance assessment of an integrated energy system with compressed air and pumped hydro storage	110
A framework for nucleation in electrochemical systems and the effect of surface energy on dendrite growth	110
Superior energy storage performance of metastable β-Bi2O3 nanostructured electrode for advanced supercapacitor applications	110
State of charge estimation combining physics-based and artificial intelligence models for Lithium-ion batteries	110
Digital twin modelling for compressed air energy storage plants: Dynamic modelling of the discharge unit	109
Accurate state of charge estimation of lithium-ion batteries using a dual fractional-order extended Kalman filter algorithm	109
Flash-catalytic upcycling of olive pomace into crystalline graphene nanosheets for a low-carbon route toward sustainable energy materials	108
Inconsistency analysis and comprehensive performance quantization of lithium-ion battery module configurations considering multi-factor cell-to-cell variation	108
Research on data-driven V2G charging and discharging strategy	108
Thermal and mechanical performance of bio-concrete with phase change material-encapsulated lignocellulosic aggregates	108
Ecofriendly-synthesized pro-microporous C-Co3O4 nanoparticles conjugated with controlled electropolymerization of pyrrole for high-efficient symmetric supercapacitors	108
Anchoring nanodiamonds on MXene modified separator for significantly boosting performance of lithium‑sulfur batteries	107
The evolution of policies for new energy storage in China (2005–2024): An analysis based on policy instruments	107
Conformal Al2O3 coating engineering enables ambient-air-stable Li5FeO4 for efficient cathode pre-lithiation	107
Editorial Board	106
Microwave power-controlled synthesis of hierarchically porous carbon spheres from potato starch for high-performance supercapacitors	106
2D Si@SiOx derived from SiCa alloy and ZnO via a solid state reaction for lithium ion batteries	106
Improving the thermal response flexibility of 2- and 3-phase composite phase change materials by metallic triply periodic minimal surface structures	106
Regulating *OOH intermediate adsorption via F-doped graphene quantum dots modulated carbon nanotubes for selective 2e− oxygen reduction reaction in value-added reaction-assisted Zn-air battery	106
Waste chicken feathers integrated with phase change materials as new inner insulation envelope for buildings	106
Free-standing electrode/separator assembly architectures for improving energy density of Lithium-ion batteries	105
Enhanced light-to-thermal conversion performance of self-assembly carbon nanotube/graphene-interconnected phase change materials for thermal-electric device	105
Thermodynamic performance and economic analysis of coupled a liquid carbon dioxide energy storage system in a coal-fired power plant	105
High-energy flexible supercapacitors based on free-standing metal oxide electrodes for ammonium ion storage	105
Study on visco-elastoplastic fractional creep model of surrounding rock of salt cavern gas storage	105
Hydrangea-like SnS2/SnO2 heterostructure and voltage control for high capacity and stable lithium ion battery	104
Co-located utility-scale battery energy storage: Modeling and economic evaluation	104
Optimal planning of energy storage system for hybrid power system considering multi correlated input stochastic variables	104
Bonding between vanadium and citric acid in solution affects the morphology of NVP/C and Na-ions storage performance	104
A variable-frequency self-heating strategy for lithium-ion batteries based on an electrochemical impedance-thermal coupling model applicable to a wide frequency range	104
Facile, catalyst-free, and high enthalpy PEG-based phase change composite for use in photothermal conversion and waste heat recovery	103
Resource utilization of iron ore concentrate leachate: Constructing polyacrylonitrile-coated Fe2O3 core-shell structures for optimized lithium storage performance	103
Importance of reactor design on efficient utilisation of thermochemical heat storage materials for background space heating	103
A two-level decentralized model for leveraging demand-side flexibility in renewable-based power systems with energy storage assets and electric vehicle fleets	103
Influence of the phase evolution and hydrogen storage behaviors of Mg-RE alloy by a multi-valence Mo-based catalyst	103
Enhanced potassium storage of two dimensional Sb2Se3/MXene@NC as an anode material for potassium-ion batteries	103
Preparation of highly efficient thermal management polyurethane foam coatings based on crosslinked modified phase change microcapsules: Integration of temperature regulation, flame retardancy, and ant	102
Material design strategies for high‑nickel ternary cathode materials	102
Stress analysis of cyclic sorption-desorption in metal hydride vessels	102
Experimental investigation on thermochemical reaction with gradient-porosity reactor for medium temperature heat storage applications	102
1-Ethyl-3-methylimidazolium tetrafluoroborate-modulated zinc-ion solvation enabling dendrite-free anodes and long-term cyclability in aqueous zinc-ion batteries	101
The impact of hump characteristics on variable speed pumped storage units under pump mode and improvement measures	101
Compact thermal management for high-density lithium-ion batteries: Liquid cooling solutions	101
Vertically-oriented zinc-doped γ-MnO2 nanowalls as high-rate anode materials for li-ion batteries	101
Enhanced Li+ transport path and interface stability of multi-channel hollow Li0.33La0.557TiO3 reinforced PVDF-based electrolytes	100
Enhancing electrochemical performance of asymmetric supercapacitors via heterojunction engineering of zeolitic imidazolate framework-derived cobalt oxide and bismuth oxide	100
MXene-based ternary composites for supercapacitors: Advancements and challenges	100
Energy management strategy optimization for hybrid energy storage system of tram based on competitive particle swarm algorithms	100
Advanced battery thermal management systems: Technologies, integration challenges, and future trends	100
Nitrogen/phosphorus co-doped honeycomb carbon decorated carbon nanotubes as a free-standing cathode for high performance lithium‑sulfur batteries	100
Multi-objective optimization and profit allocation of virtual power plant considering the security operation of distribution networks	100
Oxide cathode materials Na TMO2 (TM = Mn, Ni, Fe) for sodium-ion batteries: A review of factors influencing multiphase formation and mechanisms of multiphase interactions	99
Core–shell structured WS2@Ni-Co-S composite and activated carbon derived from rose flowers as high-efficiency hybrid supercapacitor electrodes	99
Fabrication of unibody multifunctional energy storage composites from recycled carbon fiber - an atmospheric activation process	99
Thermal runaway modeling and heat source quantification of Mn-based lithium-ion batteries via coupled kinetic and thermal analysis	99
Numerical analysis of MHD free convection in curvilinear porous enclosure with two active cylinders filled with NE-phase change material	98
Construction of a hydrophilic-hydrophobic bifunctional covalent organic framework interfacial layer and application in aqueous zinc-ion batteries	98
All-in-one universal bidirectional on/off board electric vehicle battery charger supporting a broad range of EV battery voltages	98
Catalytic influence of in-situ formed metal oxides using Na2CrO4 as precursor on the hydrogen sorption kinetics of MgH2	98