OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Astronomical Telescopes Instruments and Systems is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)

Article	Citations
Software architecture and development approach for the ASTRI Mini-Array project at the Teide Observatory	210
Simple improved reference subtraction for H4RG, H2RG, and H1RG near-infrared array detectors	59
Cabinet clock distribution network for low-frequency aperture array	49
The assembly, characterization, and performance of SISTINE	38
Coronagraph Instrument optical bench structure design and development	29
Performance and limitations of using ELT and MCAO for 50 μas astrometry	24
Jewel Optics I: non-redundant Fizeau beam combination without the guilt	22
Prospects of measuring gamma-ray burst polarization with the Daksha mission	21
Performance of a directly deposited optical blocking filter on x-ray CCDs: case study from the REgolith X-ray Imaging Spectrometer (REXIS) experiment	19
Predictive wavefront control on Keck II adaptive optics bench: on-sky coronagraphic results	18
Highlights of the SKA1-Mid telescope architecture	17
SmallSat Technology Accelerated Maturation Platform-1: a proposal to advance ultraviolet science, workforce, and technology for the Habitable Worlds Observatory	17
Wide-field polarization angle measurements of a LiteBIRD low-frequency telescope scaled antenna	15
Spectrally dispersed kernel phase interferometry with SCExAO/CHARIS: proof of concept and calibration strategies	14
Simulating the radiation loss of superconducting submillimeter wave filters and transmission lines using Sonnet em	14
Prototype for pulsar observations at low radio frequencies using log-periodic dipole antennas	13
Square Kilometre Array Low Atomic commercial off-the-shelf correlator and beamformer	13
Hybrid propagation physics for the design and modeling of astronomical observatories: a coronagraphic example	12
X-ray spectral performance of the Sony IMX290 CMOS sensor near Fano limit after a per-pixel gain calibration	12
Image-to-image translation for wavefront and point spread function estimation	11
Performance of the thin film coating on the long and collimating BEaTriX parabolic mirror	10
Imaging effects due to pixel distortions in CdZnTe detectors—results from the HREXI Calibration Facility	10
Large mission implementation lessons from history	10
Development and performance test of a scientific CCD camera prototype for the Earth 2.0 mission	9
Analytical performance model and error budget for the Roman coronagraph instrument	9

Differentiable optics with ∂Lux: I—deep calibration of flat field and phase retrieval with automatic differentiation	9
Facility for the radiometric characterization of space-based visible-near infrared detectors	9
Fat cosmic ray tracks in charge-coupled devices	9
Improved noise performance from the next-generation buried-channel p-MOSFET SiSeROs	9
Tuning of nuclear spectroscopic telescope array application specific integrated circuits to improve low energy threshold of future hard x-ray imaging detectors	8
Development of the focal-plane CMOS detector for the GEO-X mission	8
Plug-in cross-dispersing module for the Large Binocular Telescope’s infrared spectrograph LUCI	8
ASCENT: a balloon-borne hard x-ray imaging spectroscopy telescope using transition edge sensor microcalorimeter detectors	8
Spectral envelope control for a flat frequency comb spectrum	8
Compression algorithms for high-data-volume instruments on planetary missions: a case study for the Cassini mission	7
Simple concept for atmospheric dispersion corrector on-sky commissioning tests	7
MeerKAT systems engineering: tailoring the process for value and efficiency	7
Community exoplanet imaging data challenge for Roman CGI and starshade rendezvous	7
Generalized approach to compensate for low- and high-frequency errors in fast Fourier transform-based phase screen simulations	7
Radio quiet and radio notification zones characteristics for radio astronomy in medium densely populated areas and humid tropical countries	7
Warm Spitzer IRAC photometry: dependencies on observing mode and exposure time	7
Maunakea Spectroscopic Explorer exposure time calculator for end-to-end simulator: to optimizing spectrograph design and observing simulation	7
Precision wavelength calibration for radial velocity measurements using uranium lines between 3800 and 6900 Å	7
Analyzing long-term performance of the Keck-II adaptive optics system	6
Design and evaluation of an active secondary mirror positioning system for a small telescope	6
Special Section Guest Editorial: Extremely Large Telescopes	6
Minimal differential lateral acceleration configurations for starshade stationkeeping in exoplanet direct imaging	6
Digital calibration test results for Atacama Large Millimeter/submillimeter Array band 7+8 sideband separating receiver	6
Upgrading the Field-Imaging Far-Infrared Line Spectrometer for the Stratospheric Observatory for Infrared Astronomy with kinetic inductance detectors: enabling large sample (extragalactic) surveys	6
Instrument programs of the Extremely Large Class Telescopes	6
Testing station for fast screening of through silicon via-enabled application-specific integrated circuits for hard x-ray imaging detectors	6
Control oriented strategy to consider constraints of the deformable mirror M4 for the Mid-infrared ELT Imager and Spectrograph	6
Optical design of the Orbiting Astronomical Satellite for Investigating Stellar Systems	6
Misalignment algorithm of a wide-field survey telescope based on third-order quadratic nodal aberration theory	6
Polarization modeling and predictions for DKIST, part 9: flux distribution with FIDO	6
Alignment error calculation and measurement method of a compact spaceborne focal plane	6
Sky coverage assessment for the European ELT: a joint evaluation for MAORY/MICADO and HARMONI	6
Front-end application-specific integrated circuits for the Spectroscopic Time-Resolving Observatory for Broadband Energy X-rays High Energy Modular Array and Wide Field Monitor detectors: concept and	5
Collision-free path planning for LAMOST fiber positioners based on the Rapidly Exploring Random Tree method	5
Developing the active trap model for charge-coupled device charge transfer optimization in large-scale space missions	5
High-efficiency anti-reflective modification of freeform elements and cylindrical lenses for arrayed wide-field astronomical corrector units	5
Design of CCD test platform of scientific imaging for wide field survey telescope	5
Special Section Guest Editorial: SALTUS Probe-Class Mission Concept	5
Special Section Guest Editorial: The SKA Observatory	5
Space interferometer imaging limitations due to Global Positioning System uncertainties and parasitic forces in Low Earth Orbit	5
MeerKAT correlator-beamformer: a real-time processing back-end for astronomical observations	5
Multi-image X-ray interferometer module: II. Demonstration of high-resolution X-ray imaging with regular-interval coded apertures	5
Planning and optimizing multiple-order diffractive engineered surface lens production via integrated cost, schedule, and risk modeling	5
Design of a frequency-independent optic axis Pancharatnam-based achromatic half-wave plate	5
Special Section Guest Editorial: The STROBE-X Probe-Class Mission Concept	4
Precise timescale, frequency, and time-transfer technology for the Square Kilometer Array	4
Simulations of the spectral resolving power of a compact space-borne immersion-echelle spectrometer using mid-infrared wave tracing	4
Characterization of a proportional-integral-derivative feedback-controlled array of transition-edge sensor-bolometers in a far-infrared double-Fourier interferometry testbed	4
EtherCAT as an alternative for the next generation real-time control system for telescopes	4
Management of equipment vibration for extremely large telescopes	4

Impact of particle passage and focusing from micro-pore optics for radiation damage estimates	4
Optical design of an image-slicer integral field unit with two output slits	4
Single Aperture Large Telescope for Universe Studies: science overview	4
Emulating and characterizing strong turbulence conditions for space-to-ground optical links: the PICOLO bench	4
High-bandwidth, compact fine-steering mirror design for the CubeSpec space mission	4
Rapid characterization of exoplanet atmospheres with the Exoplanet Transmission Spectroscopy Imager	4
Adjustable carbon fiber reinforced plastic panel for a large-aperture telescope	4
Radiation effects on scientific complementary metal-oxide-semiconductor detectors for x-ray astronomy: II. Total ionizing dose irradiation	4
Multifidelity uncertainty quantification and model validation of large-scale multidisciplinary systems	4
Analyzing the atmospheric dispersion correction of the Gemini Planet Imager: residual dispersion above design requirements	4
Automatic spectrograph control software for SDSS-V Local Volume Mapper	4
High-redshift extragalactic science with the Single Aperture Large Telescope for Universe Studies (SALTUS) space observatory	4
Keck Planet Imager and Characterizer: a dedicated single-mode fiber injection unit for high-resolution exoplanet spectroscopy	3
Order sorting and background handling for Arcus	3
Science application driven optimization of LSSTCam charge-coupled device clocking	3
All-sky Medium Energy Gamma-ray Observatory eXplorer mission concept	3
Line Emission Mapper: an X-ray probe mission concept to study the cosmic ecosystems and the physics of galaxy formation	3
Comparative laboratory study of electric field conjugation algorithms	3
Design and qualification of an aluminum deformable mirror for spaceborne electro-optical payloads	3
Optical ray tracing of echelle spectrographs applied to the wavelength solution for precise radial velocities	3
Real-time station monitor and stationtest pipelines for LOFAR 2.0	3
Design and performance of the prototype Schwarzschild-Couder telescope camera	3
Atomic layer deposited protective coating of aluminum oxide on silver-based telescope mirror: a comparison between a pure ozone and H2O precursor	3
Stabilization of light sources with digital micromirror devices for calibration of high-precision photometric instruments	3
Optimizing the electroforming process for full-shell X-ray optics	3
Vortex fiber nulling for exoplanet observations: implementation and first light	3
End-to-end numerical modeling of the Roman Space Telescope coronagraph	3
Using the XMM-Newton small window mode to investigate systematic uncertainties in the particle background of X-ray charge-coupled device detectors	3
Extreme-ultraviolet Stellar Characterization for Atmospheric Physics and Evolution mission: motivation and overview	3
Focal plane of the Arcus Probe X-ray spectrograph	3
Line emission mapper microcalorimeter spectrometer	3
Soft X-ray quantum efficiency of a commercial CMOS imaging sensor	3
AIROPA IV: Validating point spread function reconstruction on various science cases	3
Accounting for material property uncertainty in the preliminary vibration analysis of opto-mechanical systems	3
TiEMPO: open-source time-dependent end-to-end model for simulating ground-based submillimeter astronomical observations	2
Methods for the development of an alignment platform for an astronomical instrument with application to the METIS instrument at the ELT	2
Reactive ion plasma etched surface relief gratings for low/medium/high resolution spectroscopy in astronomy	2
Assessing phase reconstruction accuracy for different nonlinear curvature wavefront sensor configurations	2
Random vibration testing of microelectromechanical deformable mirrors for space-based high-contrast imaging	2
Development of a flat calibration unit for accurate flat fielding in the mid-infrared region	2
Primary objective grating telescopy: optical properties and feasibility of applications	2
Improving the energy resolution of photon counting microwave kinetic inductance detectors using principal component analysis	2
Reflectance properties of the Acktar Magic Black™ coating for the radiation near the Lyman-α line of hydrogen: measurements and phenomenological model of the BRDF	2
Proof of concept for through silicon vias in application-specific integrated circuits for hard x-ray imaging detectors	2
Elastic characterization of nanometer-thick polymeric film for astrophysics application with an experimental-numerical method	2
Optical alignment of the Roman Space Telescope’s Coronagraph Instrument	2
Pathfinder value for integration and test of the Webb Telescope optical system	2
Mechanical strength and millimeter-wave transmittance spectrum of stacked sapphire plates bonded by sodium silicate solution	2
Lessons learned from systems engineering on the James Webb Space Telescope	2
Subkilometer scale ionospheric studies at the SKA-Low site, using MWA extended baselines	2
On the effects of spider-arms vignetting on interferometric measurements of deformable mirrors	2
Line emission mapper cryogenic system design	2
Characterization of a hybrid array of single and multi-absorber transition-edge sensor microcalorimeters for the Line Emission Mapper	2
Rapid far-infrared spectral timing of X-ray binaries with PRIMA	2
Extreme broadband dichroics: Monte Carlo transmission line modeling for astronomical spectroscopy	2
AOTF-based spectro-polarimeter for observing Earth as an exoplanet	2
AIROPA II: modeling instrumental aberrations for off-axis point spread functions in adaptive optics	2
Star and planet formation with the Single Aperture Large Telescope for Universe Studies space observatory	2
Leonardo UK high-performance shortwave avalanche photodiode arrays for astronomy	2
Proton radiation hardness of x-ray SOI pixel sensors with pinned depleted diode structure	2
On-sky demonstration of precision photometry with Bayer color filter arrays	2
L-band cryogenic radio astronomy receiver front-end of the Square Kilometre Array	2
Vibration isolation system for cryocoolers on the XRISM	2
Starshade Imaging Simulation Toolkit for Exoplanet Reconnaissance	2
Optical metrology on primary mirror of visible emission line coronagraph on board Aditya-L1 mission	2
Pyxis: a ground-based demonstrator for formation-flying optical interferometry	2
Design, development and testing of flight software for EIRSAT-1: a university-class CubeSat enabling astronomical research	2
Key wavefront sensors features for laser-assisted tomographic adaptive optics systems on the Extremely Large Telescope	2
Three-sided pyramid wavefront sensor, part 1: simulations and analysis for astronomical adaptive optics	2
Laboratory demonstration of real-time focal plane wavefront control of residual atmospheric speckles	2
Calibratability of mid-frequency aperture arrays with self-holography	2
Rules for optical metrology: Webb primary mirror case study	2
Design of the tertiary optical system for the Large Latin American Millimeter Array radio telescope	2
Orbiting laser configuration and sky coverage: coherent reference for Breakthrough Starshot ground-based laser array	2