Batteries-Basel

Article	Citations
Accurate Prediction of Voltage and Temperature for a Sodium-Ion Pouch Cell Using an Electro-Thermal Coupling Model	274
Qualitative Characterization of Lead–Acid Batteries Fabricated Using Different Technological Procedures: An EIS Approach	239
Investigation of Thermal Runaway in Prismatic Batteries with Dual-Parallel Jelly-Roll Architecture Under Thermal Abuse Conditions	228
Ionic Liquids and Ammoniates as Electrolytes for Advanced Sodium-Based Secondary Batteries	189
“In Situ” Formation of Zn Anode from Bimetallic Cu-Zn Alloy (Brass) for Dendrite-Free Operation of Zn-Air Rechargeable Battery	188
State-of-Health Estimation for Lithium-Ion Batteries Based on Lightweight DimConv-GFNet	180
Effects of Crystalline Diamond Nanoparticles on Silicon Thin Films as an Anode for a Lithium-Ion Battery	168
Rechargeable Magnesium Ion Batteries Based on Nanostructured Tungsten Disulfide Cathodes	167
Structural and Dynamic Characterization of Li–Ionic Liquid Electrolyte Solutions for Application in Li-Ion Batteries: A Molecular Dynamics Approach	153
European Transition to Electric Vehicles: Italy as a Case of Study	153
Low-Computational Model to Predict Individual Temperatures of Cells within Battery Modules	150
A Concise Overview of the Use of Low-Dimensional Molybdenum Disulfide as an Electrode Material for Li-Ion Batteries and Beyond	149
Correction: Zhang, H. Study on Thermal Runaway Behavior and Jet Characteristics of a 156 Ah Prismatic Ternary Lithium Battery. Batteries 2024, 10, 282	148
In Operando Health Monitoring for Lithium-Ion Batteries in Electric Propulsion Using Deep Learning	143
Robust Parameter Identification Strategy for Lead Acid Battery Model	141
A Novel Sequence-to-Sequence Prediction Model for Lithium-Ion Battery Capacity Degradation Based on Improved Particle Swarm Optimization	135
Prefabrication of a Lithium Fluoride Interfacial Layer to Enable Dendrite-Free Lithium Deposition	128
Transfer Learning Based on Transferability Measures for State of Health Prediction of Lithium-Ion Batteries	125
QC and MD Modelling for Predicting the Electrochemical Stability Window of Electrolytes: New Estimating Algorithm	114
Collaborative Control Strategy of Megawatt-Level Zinc–Iron Flow Battery Energy Storage System Based on Source–Grid–Load–Storage Integration	108
Readily Accessible M-Ferrocenyl-Phenyl Sulfonate as Novel Cathodic Electrolyte for Aqueous Organic Redox Flow Batteries	104
Rapid Estimation of Static Capacity Based on Machine Learning: A Time-Efficient Approach	104
Integrated All-Climate Heating/Cooling System Design and Preheating Strategy for Lithium-Ion Battery Pack	103
Developing a CeS2/ZnS Quantum Dot Composite Nanomaterial as a High-Performance Cathode Material for Supercapacitor	96
Preparation and Characterization of a LiFePO4- Lithium Salt Composite Cathode for All-Solid-State Li-Metal Batteries	95

Uncertainty-Aware Lightweight Design of CFRP Battery Enclosure Under Extreme Cold Side-Pole Impact via Bayesian Surrogates	92
In Situ Li-In Anode Formation on the Li7La3Zr2O12 Solid Electrolyte in All-Solid-State Battery	90
Economic Analysis of a Redox Flow Batteries-Based Energy Storage System for Energy Savings in Factory Energy Management System	86
Advanced Battery Modeling Framework for Enhanced Power and Energy State Estimation with Experimental Validation	85
Phase-Transformation-Activated MnCO3 as Cathode Material of Aqueous Zinc-Ion Batteries	84
Assessment of Health Indicators to Detect the Aging State of Commercial Second-Life Lithium-Ion Battery Cells through Basic Electrochemical Cycling	82
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries	79
Revealing Silicon’s Delithiation Behaviour through Empirical Analysis of Galvanostatic Charge–Discharge Curves	78
Sodium-Ion Batteries: Advances, Challenges, and Roadmap to Commercialization	78
Research Progress of Working Electrode in Electrochemical Extraction of Lithium from Brine	78
Physics-Informed Recurrent Neural Networks with Fractional-Order Constraints for the State Estimation of Lithium-Ion Batteries	78
Optimal Capacity Configuration of Wind–Solar Hydrogen Storage Microgrid Based on IDW-PSO	77
Nanostructured Manganese Dioxide for Hybrid Supercapacitor Electrodes	77
A Freestanding Multifunctional Interlayer Based on Fe/Zn Single Atoms Implanted on a Carbon Nanofiber Membrane for High-Performance Li-S Batteries	76
Microwave-Assisted Recovery of Spent LiCoO2 Battery from the Corresponding Black Mass	76
Ag-Doping Effect on MnO2 Cathodes for Flexible Quasi-Solid-State Zinc-Ion Batteries	75
Bi-Continuous Si/C Anode Materials Derived from Silica Aerogels for Lithium-Ion Batteries	74
Binder Alternatives and Manufacturing Challenges in Emerging Lithium Battery Technologies	74
Copper Wire Resistance Corrosion Test for Assessing Copper Compatibility of E-Thermal Fluids for Battery Electric Vehicles (BEVs)	73
Application of Defect Engineering via ALD in Supercapacitors	73
A High-Performance Vortex Adjustment Design for an Air-Cooling Battery Thermal Management System in Electric Vehicles	72
Pompon Mum-like SiO2/C Nanospheres with High Performance as Anodes for Lithium-Ion Batteries	72
MXenes and MXene-Based Composites: Preparation, Characteristics, Theoretical Investigations, and Application in Developing Sulfur Cathodes, Lithium Anodes, and Functional Separators for Lithium–Sulfur	72
Improving the Performance of LiFePO4 Cathodes with a Sulfur-Modified Carbon Layer	70
An Investigation into the Viability of Battery Technologies for Electric Buses in the UK	70
State-of-Health Estimation of LiFePO4 Batteries via High-Frequency EIS and Feature-Optimized Random Forests	67
Research Progress on Iron-Based Materials for Aqueous Sodium-Ion Batteries	67
Quantification of Degradation Processes in Lithium-Ion Batteries Through Internal Strain Measurement with Fiber Bragg Grating Sensors	67
Aqueous Rechargeable Sodium-Ion Batteries: From Liquid to Hydrogel	66
The Impact of Structural Pattern Types on the Electrochemical Performance of Ultra-Thick NMC 622 Electrodes for Lithium-Ion Batteries	65
Characteristic Differences of Thermal Runaway Triggered by Overheating and Overcharging in Lithium-Ion Batteries and Multi-Dimensional Safety Protection Strategies	63
A System for Determining the Surface Temperature of Cylindrical Lithium-Ion Batteries Using a Thermal Imaging Camera	63
Sodium Citrate Electrolyte Additive to Improve Zinc Anode Behavior in Aqueous Zinc-Ion Batteries	63
Introducing the Loewner Method as a Data-Driven and Regularization-Free Approach for the Distribution of Relaxation Times Analysis of Lithium-Ion Batteries	62
Influence of the Thermal Treatment on the Structure and Cycle Life of Copper Hexacyanoferrate for Aqueous Zinc-Ion Batteries	61
Internal Temperature Estimation for Lithium-Ion Cells Based on a Layered Electro-Thermal Equivalent Circuit Model	61
Investigating the Correlation Between Mechanical Impact and Long Term Performance Degradation in Li-Ion Batteries	60
Effects of Non-Uniform Temperature Distribution on the Degradation of Liquid-Cooled Parallel-Connected Lithium-Ion Cells	59
Fabrication of TiFe-Based Electrodes Using High-Energy Ball Mill with Mn Additive for NiMH Batteries	58
Solid Electrolyte Interphase Layer Formation on the Si-Based Electrodes with and without Binder Studied by XPS and ToF-SIMS Analysis	56
Two-Dimensional VO2 Nanosheets with a Controllable Crystalline-Preferred Orientation for High-Performance Zinc-Ion Batteries	55
Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries	55
Model for Rating a Vanadium Redox Flow Battery Stack through Constant Power Charge–Discharge Characterization	55
State of Charge Estimation of Lithium-Ion Batteries Based on Vector Forgetting Factor Recursive Least Square and Improved Adaptive Cubature Kalman Filter	54
Thin Reinforced Anion-Exchange Membranes for Non-Aqueous Redox Flow Battery Employing Fe/Co-Metal Complex Redox Species	54
Water-Soluble Binders for Graphite Anode in Lithium-Ion Batteries	54
Designing a Stable Alloy Interlayer on Li Metal Anodes for Fast Charging of All-Solid-State Li Metal Batteries	54
Ensuring Safety and Reliability: An Overview of Lithium-Ion Battery Service Assessment	54
Fabrication of Cu2O/CuO Nanowires by One-Step Thermal Oxidation of Flexible Copper Mesh for Supercapacitor Applications	53
Multi-Functional Potassium Ion Assists Ammonium Vanadium Oxide Cathode for High-Performance Aqueous Zinc-Ion Batteries	51

Comparative Study of Titanium Oxide Materials for Ultrafast Charging in Lithium-Ion Batteries	51
A Grid-Forming Battery Energy System with Mode-Adaptive Virtual Inductance Control	51
The Gel-State Electrolytes in Zinc-Ion Batteries	50
Electrode-Level Emulation of Temperature Impact in Commercial Li-Ion Batteries	50
A Comprehensive Review on Lithium-Ion Battery Lifetime Prediction and Aging Mechanism Analysis	50
Carbon-Coated Si Nanoparticles Anchored on Three-Dimensional Carbon Nanotube Matrix for High-Energy Stable Lithium-Ion Batteries	50
Advanced Classification of Lithium-Ion Battery Defects Using Electrochemical Impedance Spectroscopy and Machine Learning	50
Facile Synthesizing Yolk-Shelled Fe3O4@Carbon Nanocavities with Balanced Physiochemical Synergism as Efficient Hosts for High-Performance Lithium–Sulfur Batteries	49
Particle Velocity Measurement in Battery Thermal Runaway Jets Using an Enhanced Deep Learning and Adaptive Matching Framework	49
A Review of Lithium-Ion Battery Recycling: Technologies, Sustainability, and Open Issues	49
A Method for Abnormal Battery Charging Capacity Diagnosis Based on Electric Vehicles Operation Data	49
Operando Observation of Coupled Discontinuous-Continuous Transitions in Ion-Stabilized Intercalation Cathodes	48
Calorimetric Studies on Chemically Delithiated LiNi0.4Mn0.4Co0.2O2: Investigation of Phase Transition, Gas Evolution and Enthalpy of Formation	48
Effect of Ga2O3 Addition on the Properties of Garnet-Type Ta-Doped Li7La3Zr2O12 Solid Electrolyte	47
Operando Mechanochemical Evolution of Cylindrical 18650 NMC Lithium-Ion Cell Under Progressive High-Rate and Deep-Discharge Conditions Using Fiber Bragg Grating Sensing	47
Fast Ion Transfer Associated with Dehydration and Modulation of Hydration Structure in Electric Double-Layer Capacitors Using Molecular Dynamics Simulations and Experiments	47
Influence of Pulse Duration on Cutting-Edge Quality and Electrochemical Performance of Lithium Metal Anodes	46
Acknowledgment to the Reviewers of Batteries in 2022	45
Electrocatalytic and Conductive Vanadium Oxide on Carbonized Bacterial Cellulose Aerogel for the Sulfur Cathode in Li-S Batteries	44
Thermal Runaway Hazards of Ternary Lithium-Ion Batteries Under Different Ambient Pressure Environments	44
A Water-Based Fire-Extinguishing Agent of Lithium Iron Phosphate Battery Fire via an Analytic Hierarchy Process-Fuzzy TOPSIS Decision-Marking Method	44
One-Step Hydrothermal Reaction Induced Nitrogen-Doped MoS2/MXene Composites with Superior Lithium-Ion Storage	44
Polyaniline—Graphene Electrodes Prepared by Electropolymerization for High-Performance Capacitive Electrodes: A Brief Review	44
Investigation of NMC-811 Surface Degradation in Pure CO2 and Humid Air	44
Classification of the Crystal Structures of Orthosilicate Cathode Materials for Li-Ion Batteries by Artificial Neural Networks	43
Effect of Si-Based Anode Lithiation on Charging Characteristics of All-Solid-State Lithium-Ion Battery	43
Study of the Suitability of Corncob Biochar as Electrocatalyst for Zn–Air Batteries	43
A Novel Bifunctional Surface Coating Method to Effectively Eliminate Residual Li on NCM811 by Using Uniformly Dispersed Metal Oxide Solution	43
Optimal Planning of Battery Energy Storage Systems by Considering Battery Degradation due to Ambient Temperature: A Review, Challenges, and New Perspective	43
Interfacial Engineering of Fe2VO4 Nanoparticles on MXene Nanosheets for Ultra-Stable and Efficient Sodium Storage	43
Target-Mean State-of-Charge Control for Maximum Utilization of Heterogeneous Reconfigurable Battery Systems Under Constant-Bus Constraints	43
State of Health Assessment of Spent Lithium–Ion Batteries Based on Voltage Integral during the Constant Current Charge	42
Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway	42
Synthesis of a Yolk-Shell Nanostructured Silicon-Based Anode for High-Performance Li-Ion Batteries	42
Research on the Frequency Regulation Characteristics and Control Strategy of Wind Power Generation with Energy Storage Synergy	42
Crest Factor Optimization for Multisine Excitation Signals with Logarithmic Frequency Distribution Based on a Hybrid Stochastic-Deterministic Optimization Algorithm	42
A Hybrid End-to-End Dual Path Convolutional Residual LSTM Model for Battery SOH Estimation	41
A Comprehensive Review of Equalization Techniques for Reconfigured Second-Life Battery Systems	41
Deep Learning Classification of Li-Ion Battery Materials Targeting Accurate Composition Classification from Laser-Induced Breakdown Spectroscopy High-Speed Analyses	41
Breaking the Polarization Bottleneck: Innovative Pathways to High-Performance Metal–Air Batteries	40
A Practical Methodology for Real-Time Adjustment of Kalman Filter Process Noise for Lithium Battery State-of-Charge Estimation	40
Green Batteries: A Sustainable Approach Towards Next-Generation Batteries	40
Systematic Characterization of Lithium-Ion Cells for Electric Mobility and Grid Storage: A Case Study on Samsung INR21700-50G	40
Continuous Mixing of Graphite Anode Slurry: Fast-Charge Optimization Through Binder Network Tailoring	40
Enabling Holistic Tracking and Tracing in Battery Cell Production: Data Management and Applications	39
Performance of Low-Cost Energy Dense Mixed Material MnO2-Cu2O Cathodes for Commercially Scalable Aqueous Zinc Batteries	39
A Review of Graphite Anode Recycling in Lithium-Ion Batteries: Technical Challenges and Geopolitical and Economic Implications	39
A State-of-Charge-Frequency Control Strategy for Grid-Forming Battery Energy Storage Systems in Black Start	39
Ni/Fe Bimetallic Ions Co-Doped Manganese Dioxide Cathode Materials for Aqueous Zinc-Ion Batteries	39
Multiband Multisine Excitation Signal for Online Impedance Spectroscopy of Battery Cells	39
Rechargeable Li-Ion Batteries, Nanocomposite Materials and Applications	38
New Mass Transport Correlation for Vanadium Redox-Flow Batteries Based on a Model-Assisted Parameter Estimation	38
Circulating-Current-Impedance-Based Adaptive Assessment of Inconsistency in Energy Storage Systems	38
Examining the Benefits of Using Boron Compounds in Lithium Batteries: A Comprehensive Review of Literature	38
Investigation of Convective and Radiative Heat Transfer of 21700 Lithium-Ion Battery Cells	38
A Data-Driven Method Based on Feature Engineering and Physics-Constrained LSTM-EKF for Lithium-Ion Battery SOC Estimation	38
Characterization of Lithium-Ion Battery Fire Emissions—Part 1: Chemical Composition of Fine Particles (PM2.5)	37
High-Performance Anodes Made of Metallic Lithium Layers and Lithiated Silicon Layers Prepared by Vacuum Technologies	37
Understanding and Mitigating the Dissolution and Delamination Issues Encountered with High-Voltage LiNi0.5Mn1.5O4	37
Model-Based Analysis and Optimization of Acidic Tin–Iron Flow Batteries	37
Influence of Lithium Plating on the Mechanical Properties of Automotive High-Energy Pouch Batteries	37
Lithium-Ion Battery Life Prediction Using Deep Transfer Learning	37
Analytic Free-Energy Expression for the 2D-Ising Model and Perspectives for Battery Modeling	36
Selective Extraction of Lithium from Li Batteries by Leaching the Black Mass in Oxalic Acid	36
Thermal and Electrical Design Considerations for a Flexible Energy Storage System Utilizing Second-Life Electric Vehicle Batteries	36
Mediating Lithium Plating/Stripping by Constructing 3D Au@Cu Pentagonal Pyramid Array	36
Dehydrogenation of Alkali Metal Aluminum Hydrides MAlH4 (M = Li, Na, K, and Cs): Insight from First-Principles Calculations	36
Experimental Research on the Ignition Characteristics and Inhibition Strategy for Venting Emissions Mixture of Failure LiFePO4 Battery	35
Aging and Homogenized Mechanical Character of Quasi-Statically Charged Gr-Si and NMC Based Electrodes Using Damage Material Modeling	35
Battery Passports for Second-Life Batteries: An Experimental Assessment of Suitability for Mobile Applications	35
Correction: Yadasu et al. Sensor Fusion-Based Pulsed Controller for Low Power Solar-Charged Batteries with Experimental Tests: NiMH Battery as a Case Study. Batteries 2024, 10, 335	35
Failure Analysis of Fire in Lithium-Ion Battery-Powered Heating Insoles: Case Study	35
Joint Concern over Battery Health and Thermal Degradation in the Cruise Control of Intelligently Connected Electric Vehicles Using a Model-Assisted DRL Approach	35
Effect of Graphite Morphology on the Electrochemical and Mechanical Properties of SiOx/Graphite Composite Anode	35
Multiphysics Optimization of Graphite-Buffered Bilayer Anodes with Diverse Inner Materials for High-Energy Lithium-Ion Batteries	35
Chemo-Mechanical Coupling Measurement of LiMn2O4 Composite Electrode during Electrochemical Cycling	35
Ultrafast Microwave-Assisted Resin Curing Forming a Dense Cross-Linked Network on Bamboo: Toward High-Performance Hard Carbon Anodes for Sodium-Ion Batteries	34
Pulsed Current Constructs 3DM Cu/ZnO Current Collector Composite Anode for Free-Dendritic Lithium Metal Batteries	34
Design and Evaluation Framework for Modular Hybrid Battery Energy Storage Systems in Full-Electric Marine Applications	34
Correction: Grabow et al. Triggering and Characterisation of Realistic Internal Short Circuits in Lithium-Ion Pouch Cells—A New Approach Using Precise Needle Penetration. Batteries 2023, 9, 496	34

Thermal Modeling of Lithium-Ion Battery Under High-Frequency Current Excitation and Comparative Study of Self-Heating Scheme	34
Development and Environmental Assessment of a Phase Change Material Based Thermal Management System for Na/NiCl2 Batteries	34
Preparation of Mesoporous Boron-Doped Porous Carbon Derived from Coffee Grounds via Hybrid Activation for Carbon Capture and Storage	34
Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions	34
Recent Progress of Lithium-Sulfur Batteries	34
Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries	34
DFT Simulations Investigating the Trapping of Sulfides by 1T-LixMoS2 and 1T-LixMoS2/Graphene Hybrid Cathodes in Li-S Batteries	34
Electrochemical Behavior of Mixed Cu Powder and LiCl/Li13In3-Coated Li Powder Anodes in Lithium Metal Secondary Batteries	34
A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors	34
Revealing Relationship Between In Situ Impedance and Lithium Plating Onset Based on Lithium–Graphite Half-Cells	34
Lithium Metal under Static and Dynamic Mechanical Loading	33
Modification of Single-Walled Carbon Nanotube Networks Anodes for Application in Aqueous Lithium-Ion Batteries	33
Battery Test Profile Generation Framework for Electric Vehicles	33
Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries	33
Solid Electrolytes in the N-Propyl-N-methyl-pyrrolidinium Tetrafluoroborate—Lithium Tetrafluoroborate System	33
Linear Regression-Based Procedures for Extraction of Li-Ion Battery Equivalent Circuit Model Parameters	33
Impact of Silicon Content and Particle Size in Lithium-Ion Battery Anodes on Particulate Properties and Electrochemical Performance	32
Repurposing Second-Life EV Batteries to Advance Sustainable Development: A Comprehensive Review	32
Carbon Nano-Onion-Encapsulated Ni Nanoparticles for High-Performance Lithium-Ion Capacitors	32
Urea-Based Deep Eutectic Solvent with Magnesium/Lithium Dual Ions as an Aqueous Electrolyte for High-Performance Battery-Supercapacitor Hybrid Devices	32
Batch Fabrication of Electrospun PAN/PU Composite Separators for Safe Lithium-Ion Batteries	32
Integration of Electrode Markings into the Manufacturing Process of Lithium-Ion Battery Cells for Tracking and Tracing Applications	32
Battery Parameter Identification and SOC Estimation Based on Online Parameter Identification and MIUKF	31
Continuous Anode Slurry Production in Twin-Screw Extruders: Effects of the Process Setup on the Dispersion	31
Developing a Se Quantum Dots@ CoFeOx Composite Nanomaterial as a Highly Active and Stable Cathode Material for Rechargeable Zinc–Air Batteries	31
Advancements and Applications of Redox Flow Batteries in Australia	31
Insights into the Electrochemical Performance of 1.8 Ah Pouch and 18650 Cylindrical NMC:LFP|Si:C Blend Li-ion Cells	31
Comparative Techno-Economic and Life Cycle Assessment of Stationary Energy Storage Systems: Lithium-Ion, Lead-Acid, and Hydrogen	31
A Deep Learning Approach for Online State of Health Estimation of Lithium-Ion Batteries Using Partial Constant Current Charging Curves	31
Research Trends on the Dispersibility of Carbon Nanotube Suspension with Surfactants in Their Application as Electrodes of Batteries: A Mini-Review	31
SOC-Dependent Compression of Lithium-Ion Battery Electrodes	31
Evaluating the Role of Entropy Change in Lithium-Ion Battery Electro-Thermal Modelling	31
Battery SOH Prediction Based on Multi-Dimensional Health Indicators	31
Cell Architecture Design for Fast-Charging Lithium-Ion Batteries in Electric Vehicles	31
The Role of the Precursor on the Electrochemical Performance of N,S Co-Doped Graphene Electrodes in Aqueous Electrolytes	31
Limiting Factors Affecting the Ionic Conductivities of LATP/Polymer Hybrid Electrolytes	31
Structurally Robust Prussian Blue Nanocubes as High-Rate Cathode Materials for Sodium- and Lithium-Ion Batteries	31
Ionowaxes on Porous Polymer Supports Form Cheap, Robust and Exquisitely Selective Proton-Conducting Membranes	31
Carbon-Coated CF-Si/Al Anodes for Improved Lithium-Ion Battery Performance	30
Investigating the Cell Result Multiplication Method for Emission Test of Battery Module	30
Testing a Lithium-Oxygen (Air) Battery: Catalytic Properties of Positive Electrode Materials	30
Intrinsic Thermal Stability of Li-Rich Mn-Based Cathodes Enabling Safe High-Energy Lithium-Ion Batteries	30
Multi-Layer TiO2−x-PEDOT-Decorated Industrial Fe2O3 Composites as Anode Materials for Cycle-Performance-Enhanced Lithium-Ion Batteries	30
Thermal Propagation Test Bench for the Study of the Paschen Curve and Lightning Arcs of Venting Gas	30
Aging Mechanism of Mn-Based Prussian Blue Cathode Material by Synchrotron 2D X-ray Fluorescence	30
The Assessment of Electric Vehicle Storage Lifetime Using Battery Thermal Management System	30
Coupling Model and Early-Stage Internal Short Circuits Fault Diagnosis for Gel Electrolyte Lithium-Ion Batteries	30
A Novel Stochastic Mixed-Integer-Linear-Logical Programming Model for Optimal Coordination of Hybrid Storage Systems in Isolated Microgrids Considering Demand Response	30
Comparative Analysis and PSO-Based Optimization of Battery Technologies for Autonomous Mobile Robots	30
Porous Electrode Materials for Zn-Ion Batteries: From Fabrication and Electrochemical Application	30
Analysis of the Energy Efficiency of a Hybrid Energy Storage System for an Electric Vehicle	30
Crystal Group Prediction for Lithiated Manganese Oxides Using Machine Learning	30
Numerical Modeling of a Low-Cobalt All-Solid-State Cell with Ceramic Electrolyte Using a Deformable Geometry	29
Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation	29
Effect of Aging Path on Degradation Characteristics of Lithium-Ion Batteries in Low-Temperature Environments	29
Semi-Spontaneous Post-Crosslinking Triblock Copolymer Electrolyte for Solid-State Lithium Battery	29
The Role of Binders for Water-Based Anode Dispersions in Inkjet Printing	29
Recent Advances in All-Solid-State Lithium–Oxygen Batteries: Challenges, Strategies, Future	29
Stabilization of the Interface between a PEO-Based Lithium Solid Polymer Electrolyte and a 4-Volt Class Cathode, LiCoO2, by the Addition of LiPF6 as a Lithium Salt	29
Phenazine-Based Compound as a Universal Water-Soluble Anolyte Material for the Redox Flow Batteries	29
Experimental and Reduced-Order Modeling Research of Thermal Runaway Propagation in 100 Ah Lithium Iron Phosphate Battery Module	28
Advancements in Lithium–Oxygen Batteries: A Comprehensive Review of Cathode and Anode Materials	28
Lifetime Prediction Analysis of Proton Exchange Membrane Fuel Cells Based on Empirical Mode Decomposition—Temporal Convolutional Network	28
A Self-Charging Concentration Cell: Theory	28
Evaluating a Nickel–Metal Hydride (NiMH) Battery Regeneration Patent Based on a Non-Intrusive and Unsupervised Prototype	28
Intergranular Crack of Cathode Materials in Lithium-Ion Batteries Subjected to Rapid Cooling During Transient Thermal Runaway	28
Accurate State of Charge Estimation for Lithium-Ion Batteries Using a Temporal Convolutional Network and Bidirectional Long Short-Term Memory Hybrid Model	28
Experimental Investigation of Phase Change Material-Based Battery Pack Performance Under Elevated Ambient Temperature	28
Gaining a New Technological Readiness Level for Laser-Structured Electrodes in High-Capacity Lithium-Ion Pouch Cells	28
Mechanical and Optical Characterization of Lithium-Ion Battery Cell Components/Cross-Ply Lamination Effect	28
Electroforming as a Novel One-Step Manufacturing Method of Structured Aluminum Foil Current Collectors for Lithium-Ion Batteries	28
Battery Impedance Spectroscopy Embedded Measurement System	28
Galvanic Replacement Preparation of Spindle-Structured Sb@C@NC as Anode for Superior Lithium-Ion Storage	28
In Situ Metal Organic Framework (ZIF-8) and Mechanofusion-Assisted MWCNT Coating of LiFePO4/C Composite Material for Lithium-Ion Batteries	27
Predicting the Future Capacity and Remaining Useful Life of Lithium-Ion Batteries Based on Deep Transfer Learning	27
Electrode Kinetic Data: Geometric vs. Real Surface Area	27
Status and Prospects of Research on Lithium-Ion Battery Parameter Identification	27
A Review of Coupled Degradation Mechanisms in PEMFCs: Thermal Management, Hydrogen Crossover and Mitigation Strategies	27
Synergistic Effect of Redox-Active NiS-Co@C Ternary Nanocomposite for Supercapattery Hybrid Energy Storage Devices	27
A Review on Advanced Battery Thermal Management Systems for Fast Charging in Electric Vehicles	27
Effects of Different Charging Currents and Temperatures on the Voltage Plateau Behavior of Li-Ion Batteries	27
Thermal Safety Research of Lithium-Ion Batteries Based on Flame-Retardant Phase Change Materials	26
Engineering Hierarchical Porous Electrodes Integrated with Conformal Ultrathin Nanosheets for Achieving Rapid Kinetics in High-Power Microbatteries	26
Comparative Analysis via CFD Simulation on the Impact of Graphite Anode Morphologies on the Discharge of a Lithium-Ion Battery	26
An Experimental Study on the Cell Balancing Parameters for Faulty Cell Detection in a Battery Module	26
On the Stability of the Interface between Li2TiS3 Cathode and Li6PS5Cl Solid State Electrolytes for Battery Applications: A DFT Study	26
One-Step Synthesis of Zirconium Sulfide Nanoparticles on Flexible Carbon Cloth for Supercapacitor Application	26
Synergistic Heteroatom Doping in Hard Carbon Anodes: Unlocking High Performance in Potassium-Ion Batteries	26
Identification and Error Analysis of Lithium-Ion Battery Oriented to Cloud Data Application Scenario	26
Preparing Co/N-Doped Carbon as Electrocatalyst toward Oxygen Reduction Reaction via the Ancient “Pharaoh’s Snakes” Reaction	26
Tracking Flows of End-of-Life Battery Materials and Manufacturing Scrap	26
Advancements in Vibration Testing: Effects on Thermal Performance and Degradation of Modern Batteries	26
Early Prediction of Battery Lifetime Using Centered Isotonic Regression with Quantile-Transformed Features	26
Effects of Excessive Prelithiation on Full-Cell Performance of Li-Ion Batteries with a Hard-Carbon/Nanosized-Si Composite Anode	26
State of Health Estimation of Lithium Cobalt Oxide Batteries Based on ARX Identification Across Different Temperatures	25