OOIR: Observatory of International Research

Papers

(The median citation count of Batteries-Basel is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)

Article	Citations
Developing a CeS2/ZnS Quantum Dot Composite Nanomaterial as a High-Performance Cathode Material for Supercapacitor	226
Accurate Prediction of Voltage and Temperature for a Sodium-Ion Pouch Cell Using an Electro-Thermal Coupling Model	200
Revealing Silicon’s Delithiation Behaviour through Empirical Analysis of Galvanostatic Charge–Discharge Curves	190
Qualitative Characterization of Lead–Acid Batteries Fabricated Using Different Technological Procedures: An EIS Approach	176
Investigation of Thermal Runaway in Prismatic Batteries with Dual-Parallel Jelly-Roll Architecture Under Thermal Abuse Conditions	170
Internal Temperature Estimation for Lithium-Ion Cells Based on a Layered Electro-Thermal Equivalent Circuit Model	165
Ionic Liquids and Ammoniates as Electrolytes for Advanced Sodium-Based Secondary Batteries	157
Fabrication of TiFe-Based Electrodes Using High-Energy Ball Mill with Mn Additive for NiMH Batteries	154
“In Situ” Formation of Zn Anode from Bimetallic Cu-Zn Alloy (Brass) for Dendrite-Free Operation of Zn-Air Rechargeable Battery	137
State-of-Health Estimation for Lithium-Ion Batteries Based on Lightweight DimConv-GFNet	134
Characteristic Differences of Thermal Runaway Triggered by Overheating and Overcharging in Lithium-Ion Batteries and Multi-Dimensional Safety Protection Strategies	132
A High-Performance Vortex Adjustment Design for an Air-Cooling Battery Thermal Management System in Electric Vehicles	128
Comparative Study of Titanium Oxide Materials for Ultrafast Charging in Lithium-Ion Batteries	125
Effects of Crystalline Diamond Nanoparticles on Silicon Thin Films as an Anode for a Lithium-Ion Battery	125
Rechargeable Magnesium Ion Batteries Based on Nanostructured Tungsten Disulfide Cathodes	117
Ensuring Safety and Reliability: An Overview of Lithium-Ion Battery Service Assessment	114
An Investigation into the Viability of Battery Technologies for Electric Buses in the UK	111
A System for Determining the Surface Temperature of Cylindrical Lithium-Ion Batteries Using a Thermal Imaging Camera	111
Sodium Citrate Electrolyte Additive to Improve Zinc Anode Behavior in Aqueous Zinc-Ion Batteries	105
Improving the Performance of LiFePO4 Cathodes with a Sulfur-Modified Carbon Layer	101
Nanostructured Manganese Dioxide for Hybrid Supercapacitor Electrodes	100
Multi-Functional Potassium Ion Assists Ammonium Vanadium Oxide Cathode for High-Performance Aqueous Zinc-Ion Batteries	99
European Transition to Electric Vehicles: Italy as a Case of Study	98
Copper Wire Resistance Corrosion Test for Assessing Copper Compatibility of E-Thermal Fluids for Battery Electric Vehicles (BEVs)	92
Structural and Dynamic Characterization of Li–Ionic Liquid Electrolyte Solutions for Application in Li-Ion Batteries: A Molecular Dynamics Approach	87

Low-Computational Model to Predict Individual Temperatures of Cells within Battery Modules	86
Correction: Zhang, H. Study on Thermal Runaway Behavior and Jet Characteristics of a 156 Ah Prismatic Ternary Lithium Battery. Batteries 2024, 10, 282	81
A Concise Overview of the Use of Low-Dimensional Molybdenum Disulfide as an Electrode Material for Li-Ion Batteries and Beyond	81
Production and Characterisation of Fibre-Reinforced All-Solid-State Electrodes and Separator for the Application in Structural Batteries	77
In Operando Health Monitoring for Lithium-Ion Batteries in Electric Propulsion Using Deep Learning	76
Hierarchically Porous Vanadium-Based Cathode Materials for High-Performance Na-Ion Batteries	76
Bi-Continuous Si/C Anode Materials Derived from Silica Aerogels for Lithium-Ion Batteries	75
Robust Parameter Identification Strategy for Lead Acid Battery Model	75
A Novel Sequence-to-Sequence Prediction Model for Lithium-Ion Battery Capacity Degradation Based on Improved Particle Swarm Optimization	73
Microwave-Assisted Recovery of Spent LiCoO2 Battery from the Corresponding Black Mass	73
Introducing the Loewner Method as a Data-Driven and Regularization-Free Approach for the Distribution of Relaxation Times Analysis of Lithium-Ion Batteries	72
Ag-Doping Effect on MnO2 Cathodes for Flexible Quasi-Solid-State Zinc-Ion Batteries	72
Transfer Learning Based on Transferability Measures for State of Health Prediction of Lithium-Ion Batteries	69
A Grid-Forming Battery Energy System with Mode-Adaptive Virtual Inductance Control	69
Prefabrication of a Lithium Fluoride Interfacial Layer to Enable Dendrite-Free Lithium Deposition	69
Aqueous Rechargeable Sodium-Ion Batteries: From Liquid to Hydrogel	68
The Gel-State Electrolytes in Zinc-Ion Batteries	67
QC and MD Modelling for Predicting the Electrochemical Stability Window of Electrolytes: New Estimating Algorithm	67
State-of-Health Estimation of LiFePO4 Batteries via High-Frequency EIS and Feature-Optimized Random Forests	66
A Freestanding Multifunctional Interlayer Based on Fe/Zn Single Atoms Implanted on a Carbon Nanofiber Membrane for High-Performance Li-S Batteries	65
State of Charge Estimation of Lithium-Ion Batteries Based on Vector Forgetting Factor Recursive Least Square and Improved Adaptive Cubature Kalman Filter	64
Preparation and Characterization of a LiFePO4- Lithium Salt Composite Cathode for All-Solid-State Li-Metal Batteries	64
Optimal Capacity Configuration of Wind–Solar Hydrogen Storage Microgrid Based on IDW-PSO	63
Thin Reinforced Anion-Exchange Membranes for Non-Aqueous Redox Flow Battery Employing Fe/Co-Metal Complex Redox Species	62
Uncertainty-Aware Lightweight Design of CFRP Battery Enclosure Under Extreme Cold Side-Pole Impact via Bayesian Surrogates	62
Economic Analysis of a Redox Flow Batteries-Based Energy Storage System for Energy Savings in Factory Energy Management System	60
In Situ Li-In Anode Formation on the Li7La3Zr2O12 Solid Electrolyte in All-Solid-State Battery	60
Quantification of Degradation Processes in Lithium-Ion Batteries Through Internal Strain Measurement with Fiber Bragg Grating Sensors	58
Phase-Transformation-Activated MnCO3 as Cathode Material of Aqueous Zinc-Ion Batteries	58
Fabrication of Cu2O/CuO Nanowires by One-Step Thermal Oxidation of Flexible Copper Mesh for Supercapacitor Applications	58
Advanced Battery Modeling Framework for Enhanced Power and Energy State Estimation with Experimental Validation	58
A Physics-Guided Transformer for Robust State of Charge Estimation in Aging Lithium-Ion Batteries	57
Readily Accessible M-Ferrocenyl-Phenyl Sulfonate as Novel Cathodic Electrolyte for Aqueous Organic Redox Flow Batteries	56
Rapid Estimation of Static Capacity Based on Machine Learning: A Time-Efficient Approach	55
Sodium-Ion Batteries: Advances, Challenges, and Roadmap to Commercialization	55
Research Progress on Iron-Based Materials for Aqueous Sodium-Ion Batteries	55
Physics-Informed Recurrent Neural Networks with Fractional-Order Constraints for the State Estimation of Lithium-Ion Batteries	53
Carbon-Coated Si Nanoparticles Anchored on Three-Dimensional Carbon Nanotube Matrix for High-Energy Stable Lithium-Ion Batteries	53
Effects of Non-Uniform Temperature Distribution on the Degradation of Liquid-Cooled Parallel-Connected Lithium-Ion Cells	53
Designing a Stable Alloy Interlayer on Li Metal Anodes for Fast Charging of All-Solid-State Li Metal Batteries	52
Two-Dimensional VO2 Nanosheets with a Controllable Crystalline-Preferred Orientation for High-Performance Zinc-Ion Batteries	52
Assessment of Health Indicators to Detect the Aging State of Commercial Second-Life Lithium-Ion Battery Cells through Basic Electrochemical Cycling	52
Application of Defect Engineering via ALD in Supercapacitors	52
The Impact of Structural Pattern Types on the Electrochemical Performance of Ultra-Thick NMC 622 Electrodes for Lithium-Ion Batteries	50
Solid Electrolyte Interphase Layer Formation on the Si-Based Electrodes with and without Binder Studied by XPS and ToF-SIMS Analysis	49
Collaborative Control Strategy of Megawatt-Level Zinc–Iron Flow Battery Energy Storage System Based on Source–Grid–Load–Storage Integration	49
Research Progress of Working Electrode in Electrochemical Extraction of Lithium from Brine	48
MXenes and MXene-Based Composites: Preparation, Characteristics, Theoretical Investigations, and Application in Developing Sulfur Cathodes, Lithium Anodes, and Functional Separators for Lithium–Sulfur	48
Influence of the Thermal Treatment on the Structure and Cycle Life of Copper Hexacyanoferrate for Aqueous Zinc-Ion Batteries	46
Model for Rating a Vanadium Redox Flow Battery Stack through Constant Power Charge–Discharge Characterization	46

Integrated All-Climate Heating/Cooling System Design and Preheating Strategy for Lithium-Ion Battery Pack	45
Pompon Mum-like SiO2/C Nanospheres with High Performance as Anodes for Lithium-Ion Batteries	45
A Review of Lithium-Ion Battery Recycling: Technologies, Sustainability, and Open Issues	44
Ni/Fe Bimetallic Ions Co-Doped Manganese Dioxide Cathode Materials for Aqueous Zinc-Ion Batteries	44
Breaking the Polarization Bottleneck: Innovative Pathways to High-Performance Metal–Air Batteries	44
A Comprehensive Review on Lithium-Ion Battery Lifetime Prediction and Aging Mechanism Analysis	44
Particle Velocity Measurement in Battery Thermal Runaway Jets Using an Enhanced Deep Learning and Adaptive Matching Framework	43
Synthesis of a Yolk-Shell Nanostructured Silicon-Based Anode for High-Performance Li-Ion Batteries	43
A Method for Abnormal Battery Charging Capacity Diagnosis Based on Electric Vehicles Operation Data	43
An Experimental Investigation of Thermal Runaway and Gas Release of NMC Lithium-Ion Pouch Batteries Depending on the State of Charge Level	43
Facile Synthesizing Yolk-Shelled Fe3O4@Carbon Nanocavities with Balanced Physiochemical Synergism as Efficient Hosts for High-Performance Lithium–Sulfur Batteries	43
New Mass Transport Correlation for Vanadium Redox-Flow Batteries Based on a Model-Assisted Parameter Estimation	42
Calorimetric Studies on Chemically Delithiated LiNi0.4Mn0.4Co0.2O2: Investigation of Phase Transition, Gas Evolution and Enthalpy of Formation	42
Optimal Planning of Battery Energy Storage Systems by Considering Battery Degradation due to Ambient Temperature: A Review, Challenges, and New Perspective	42
Operando Observation of Coupled Discontinuous-Continuous Transitions in Ion-Stabilized Intercalation Cathodes	42
Multiband Multisine Excitation Signal for Online Impedance Spectroscopy of Battery Cells	41
Performance of Low-Cost Energy Dense Mixed Material MnO2-Cu2O Cathodes for Commercially Scalable Aqueous Zinc Batteries	40
Electrocatalytic and Conductive Vanadium Oxide on Carbonized Bacterial Cellulose Aerogel for the Sulfur Cathode in Li-S Batteries	40
Influence of Pulse Duration on Cutting-Edge Quality and Electrochemical Performance of Lithium Metal Anodes	39
Acknowledgment to the Reviewers of Batteries in 2022	39
Study of the Suitability of Corncob Biochar as Electrocatalyst for Zn–Air Batteries	39
Composition and Explosibility of Gas Emissions from Lithium-Ion Batteries Undergoing Thermal Runaway	38
Thermal Runaway Hazards of Ternary Lithium-Ion Batteries Under Different Ambient Pressure Environments	38
A Comprehensive Review of Equalization Techniques for Reconfigured Second-Life Battery Systems	38
A Hybrid End-to-End Dual Path Convolutional Residual LSTM Model for Battery SOH Estimation	38
State of Health Assessment of Spent Lithium–Ion Batteries Based on Voltage Integral during the Constant Current Charge	37
Classification of the Crystal Structures of Orthosilicate Cathode Materials for Li-Ion Batteries by Artificial Neural Networks	37
A Water-Based Fire-Extinguishing Agent of Lithium Iron Phosphate Battery Fire via an Analytic Hierarchy Process-Fuzzy TOPSIS Decision-Marking Method	37
Crest Factor Optimization for Multisine Excitation Signals with Logarithmic Frequency Distribution Based on a Hybrid Stochastic-Deterministic Optimization Algorithm	37
Polyaniline—Graphene Electrodes Prepared by Electropolymerization for High-Performance Capacitive Electrodes: A Brief Review	37
Research on the Frequency Regulation Characteristics and Control Strategy of Wind Power Generation with Energy Storage Synergy	37
One-Step Hydrothermal Reaction Induced Nitrogen-Doped MoS2/MXene Composites with Superior Lithium-Ion Storage	36
Systematic Characterization of Lithium-Ion Cells for Electric Mobility and Grid Storage: A Case Study on Samsung INR21700-50G	36
Rechargeable Li-Ion Batteries, Nanocomposite Materials and Applications	36
A Data-Driven Method Based on Feature Engineering and Physics-Constrained LSTM-EKF for Lithium-Ion Battery SOC Estimation	36
Operando Mechanochemical Evolution of Cylindrical 18650 NMC Lithium-Ion Cell Under Progressive High-Rate and Deep-Discharge Conditions Using Fiber Bragg Grating Sensing	35
Interfacial Engineering of Fe2VO4 Nanoparticles on MXene Nanosheets for Ultra-Stable and Efficient Sodium Storage	35
A Novel Bifunctional Surface Coating Method to Effectively Eliminate Residual Li on NCM811 by Using Uniformly Dispersed Metal Oxide Solution	35
Effect of Ga2O3 Addition on the Properties of Garnet-Type Ta-Doped Li7La3Zr2O12 Solid Electrolyte	35
A State-of-Charge-Frequency Control Strategy for Grid-Forming Battery Energy Storage Systems in Black Start	35
Effect of Si-Based Anode Lithiation on Charging Characteristics of All-Solid-State Lithium-Ion Battery	35
Investigation of Convective and Radiative Heat Transfer of 21700 Lithium-Ion Battery Cells	35
Green Batteries: A Sustainable Approach Towards Next-Generation Batteries	34
Fast Ion Transfer Associated with Dehydration and Modulation of Hydration Structure in Electric Double-Layer Capacitors Using Molecular Dynamics Simulations and Experiments	34
Mediating Lithium Plating/Stripping by Constructing 3D Au@Cu Pentagonal Pyramid Array	34
Batch Fabrication of Electrospun PAN/PU Composite Separators for Safe Lithium-Ion Batteries	34
Deep Learning Classification of Li-Ion Battery Materials Targeting Accurate Composition Classification from Laser-Induced Breakdown Spectroscopy High-Speed Analyses	34
A Practical Methodology for Real-Time Adjustment of Kalman Filter Process Noise for Lithium Battery State-of-Charge Estimation	34
Integration of Electrode Markings into the Manufacturing Process of Lithium-Ion Battery Cells for Tracking and Tracing Applications	34
Experimental Research on the Ignition Characteristics and Inhibition Strategy for Venting Emissions Mixture of Failure LiFePO4 Battery	34
Investigation of NMC-811 Surface Degradation in Pure CO2 and Humid Air	34
Analytic Free-Energy Expression for the 2D-Ising Model and Perspectives for Battery Modeling	34
Carbon Nano-Onion-Encapsulated Ni Nanoparticles for High-Performance Lithium-Ion Capacitors	34
Selective Extraction of Lithium from Li Batteries by Leaching the Black Mass in Oxalic Acid	34
Multiphysics Optimization of Graphite-Buffered Bilayer Anodes with Diverse Inner Materials for High-Energy Lithium-Ion Batteries	33
Linear Regression-Based Procedures for Extraction of Li-Ion Battery Equivalent Circuit Model Parameters	33
Correction: Yadasu et al. Sensor Fusion-Based Pulsed Controller for Low Power Solar-Charged Batteries with Experimental Tests: NiMH Battery as a Case Study. Batteries 2024, 10, 335	33
Lithium Metal under Static and Dynamic Mechanical Loading	33
SOC-Dependent Compression of Lithium-Ion Battery Electrodes	33
Joint Concern over Battery Health and Thermal Degradation in the Cruise Control of Intelligently Connected Electric Vehicles Using a Model-Assisted DRL Approach	32
Solid Electrolytes in the N-Propyl-N-methyl-pyrrolidinium Tetrafluoroborate—Lithium Tetrafluoroborate System	32
Chemo-Mechanical Coupling Measurement of LiMn2O4 Composite Electrode during Electrochemical Cycling	32
Thermal and Electrical Design Considerations for a Flexible Energy Storage System Utilizing Second-Life Electric Vehicle Batteries	32
The Role of the Precursor on the Electrochemical Performance of N,S Co-Doped Graphene Electrodes in Aqueous Electrolytes	32
Aging and Homogenized Mechanical Character of Quasi-Statically Charged Gr-Si and NMC Based Electrodes Using Damage Material Modeling	32
Failure Analysis of Fire in Lithium-Ion Battery-Powered Heating Insoles: Case Study	32
Effect of Flame Retardants and Electrolyte Variations on Li-Ion Batteries	32
Life Cycle Assessment of a Lithium-Ion Battery Pack Unit Made of Cylindrical Cells	31
Correction: Grabow et al. Triggering and Characterisation of Realistic Internal Short Circuits in Lithium-Ion Pouch Cells—A New Approach Using Precise Needle Penetration. Batteries 2023, 9, 496	31
Preparation of Mesoporous Boron-Doped Porous Carbon Derived from Coffee Grounds via Hybrid Activation for Carbon Capture and Storage	31
Design and Evaluation Framework for Modular Hybrid Battery Energy Storage Systems in Full-Electric Marine Applications	31
Electrochemical Behavior of Mixed Cu Powder and LiCl/Li13In3-Coated Li Powder Anodes in Lithium Metal Secondary Batteries	31
Understanding and Mitigating the Dissolution and Delamination Issues Encountered with High-Voltage LiNi0.5Mn1.5O4	31
Research Trends on the Dispersibility of Carbon Nanotube Suspension with Surfactants in Their Application as Electrodes of Batteries: A Mini-Review	31
Examining the Benefits of Using Boron Compounds in Lithium Batteries: A Comprehensive Review of Literature	31
Battery Test Profile Generation Framework for Electric Vehicles	30
Recent Progress of Lithium-Sulfur Batteries	30
Continuous Anode Slurry Production in Twin-Screw Extruders: Effects of the Process Setup on the Dispersion	30
Influence of Lithium Plating on the Mechanical Properties of Automotive High-Energy Pouch Batteries	30
Effect of Graphite Morphology on the Electrochemical and Mechanical Properties of SiOx/Graphite Composite Anode	30

A Hollow-Shaped ZIF-8-N-Doped Porous Carbon Fiber for High-Performance Zn-Ion Hybrid Supercapacitors	30
Ultrafast Microwave-Assisted Resin Curing Forming a Dense Cross-Linked Network on Bamboo: Toward High-Performance Hard Carbon Anodes for Sodium-Ion Batteries	30
Battery Passports for Second-Life Batteries: An Experimental Assessment of Suitability for Mobile Applications	30
Modification of Single-Walled Carbon Nanotube Networks Anodes for Application in Aqueous Lithium-Ion Batteries	30
Deep Eutectic Solvent (DES) for In Situ Templating Carbon Material: Carbon Characterization and Application in Supercapacitors Containing Multivalent Ions	30
Development and Environmental Assessment of a Phase Change Material Based Thermal Management System for Na/NiCl2 Batteries	30
Limiting Factors Affecting the Ionic Conductivities of LATP/Polymer Hybrid Electrolytes	30
DFT Simulations Investigating the Trapping of Sulfides by 1T-LixMoS2 and 1T-LixMoS2/Graphene Hybrid Cathodes in Li-S Batteries	30
High-Performance Anodes Made of Metallic Lithium Layers and Lithiated Silicon Layers Prepared by Vacuum Technologies	29
Ionowaxes on Porous Polymer Supports Form Cheap, Robust and Exquisitely Selective Proton-Conducting Membranes	29
Impact of Sulfur Infiltration Time and Its Content in an N-doped Mesoporous Carbon for Application in Li-S Batteries	29
Battery SOH Prediction Based on Multi-Dimensional Health Indicators	29
Pulsed Current Constructs 3DM Cu/ZnO Current Collector Composite Anode for Free-Dendritic Lithium Metal Batteries	29
Characterization of Lithium-Ion Battery Fire Emissions—Part 1: Chemical Composition of Fine Particles (PM2.5)	29
Recycling of Valuable Metals from the Priority Lithium Extraction Residue Obtained through Hydrogen Reduction of Spent Lithium Batteries	29
Impact of Silicon Content and Particle Size in Lithium-Ion Battery Anodes on Particulate Properties and Electrochemical Performance	29
Cell Architecture Design for Fast-Charging Lithium-Ion Batteries in Electric Vehicles	29
Advancements and Applications of Redox Flow Batteries in Australia	29
Impact of Full Prelithiation of Si-Based Anodes on the Rate and Cycle Performance of Li-Ion Capacitors	29
Evaluating the Role of Entropy Change in Lithium-Ion Battery Electro-Thermal Modelling	29
Lithium-Ion Battery Life Prediction Using Deep Transfer Learning	28
Urea-Based Deep Eutectic Solvent with Magnesium/Lithium Dual Ions as an Aqueous Electrolyte for High-Performance Battery-Supercapacitor Hybrid Devices	28
Model-Based Analysis and Optimization of Acidic Tin–Iron Flow Batteries	28
Comparative Techno-Economic and Life Cycle Assessment of Stationary Energy Storage Systems: Lithium-Ion, Lead-Acid, and Hydrogen	28
Revealing Relationship Between In Situ Impedance and Lithium Plating Onset Based on Lithium–Graphite Half-Cells	28
A Deep Learning Approach for Online State of Health Estimation of Lithium-Ion Batteries Using Partial Constant Current Charging Curves	28
Battery Parameter Identification and SOC Estimation Based on Online Parameter Identification and MIUKF	28
Thermal Modeling of Lithium-Ion Battery Under High-Frequency Current Excitation and Comparative Study of Self-Heating Scheme	28
Repurposing Second-Life EV Batteries to Advance Sustainable Development: A Comprehensive Review	28
Dehydrogenation of Alkali Metal Aluminum Hydrides MAlH4 (M = Li, Na, K, and Cs): Insight from First-Principles Calculations	28
Investigating the Cell Result Multiplication Method for Emission Test of Battery Module	28
Intergranular Crack of Cathode Materials in Lithium-Ion Batteries Subjected to Rapid Cooling During Transient Thermal Runaway	27
Electroforming as a Novel One-Step Manufacturing Method of Structured Aluminum Foil Current Collectors for Lithium-Ion Batteries	27
Lifetime Prediction Analysis of Proton Exchange Membrane Fuel Cells Based on Empirical Mode Decomposition—Temporal Convolutional Network	27
Tracking Flows of End-of-Life Battery Materials and Manufacturing Scrap	27
Stabilization of the Interface between a PEO-Based Lithium Solid Polymer Electrolyte and a 4-Volt Class Cathode, LiCoO2, by the Addition of LiPF6 as a Lithium Salt	27
Evaluating a Nickel–Metal Hydride (NiMH) Battery Regeneration Patent Based on a Non-Intrusive and Unsupervised Prototype	27
Multi-Layer TiO2−x-PEDOT-Decorated Industrial Fe2O3 Composites as Anode Materials for Cycle-Performance-Enhanced Lithium-Ion Batteries	27
The Role of Binders for Water-Based Anode Dispersions in Inkjet Printing	27
Thermal Safety Research of Lithium-Ion Batteries Based on Flame-Retardant Phase Change Materials	27
Engineering Hierarchical Porous Electrodes Integrated with Conformal Ultrathin Nanosheets for Achieving Rapid Kinetics in High-Power Microbatteries	27
Aging Mechanism of Mn-Based Prussian Blue Cathode Material by Synchrotron 2D X-ray Fluorescence	27
Coupling Model and Early-Stage Internal Short Circuits Fault Diagnosis for Gel Electrolyte Lithium-Ion Batteries	27
Comparative Analysis and PSO-Based Optimization of Battery Technologies for Autonomous Mobile Robots	27
Developing a Se Quantum Dots@ CoFeOx Composite Nanomaterial as a Highly Active and Stable Cathode Material for Rechargeable Zinc–Air Batteries	27
The Assessment of Electric Vehicle Storage Lifetime Using Battery Thermal Management System	27
Enable High-Energy LiNi0.5Co0.2Mn0.3O2 by Ultra-Thin Coating through Wet Impregnation	27
Gaining a New Technological Readiness Level for Laser-Structured Electrodes in High-Capacity Lithium-Ion Pouch Cells	27
Insights into the Electrochemical Performance of 1.8 Ah Pouch and 18650 Cylindrical NMC:LFP\|Si:C Blend Li-ion Cells	27
Testing a Lithium-Oxygen (Air) Battery: Catalytic Properties of Positive Electrode Materials	27
Experimental Investigation of Phase Change Material-Based Battery Pack Performance Under Elevated Ambient Temperature	26
Semi-Spontaneous Post-Crosslinking Triblock Copolymer Electrolyte for Solid-State Lithium Battery	26
A Self-Charging Concentration Cell: Theory	26
Battery Impedance Spectroscopy Embedded Measurement System	26
Mechanical and Optical Characterization of Lithium-Ion Battery Cell Components/Cross-Ply Lamination Effect	26
Analysis of the Energy Efficiency of a Hybrid Energy Storage System for an Electric Vehicle	26
Accurate State of Charge Estimation for Lithium-Ion Batteries Using a Temporal Convolutional Network and Bidirectional Long Short-Term Memory Hybrid Model	26
Crystal Group Prediction for Lithiated Manganese Oxides Using Machine Learning	26
Numerical Modeling of a Low-Cobalt All-Solid-State Cell with Ceramic Electrolyte Using a Deformable Geometry	26
Effects of Different Charging Currents and Temperatures on the Voltage Plateau Behavior of Li-Ion Batteries	26
Synergistic Effect of Redox-Active NiS-Co@C Ternary Nanocomposite for Supercapattery Hybrid Energy Storage Devices	25
Effect of Aging Path on Degradation Characteristics of Lithium-Ion Batteries in Low-Temperature Environments	25
Advancements in Lithium–Oxygen Batteries: A Comprehensive Review of Cathode and Anode Materials	25
A Review on Advanced Battery Thermal Management Systems for Fast Charging in Electric Vehicles	25
Electrode Kinetic Data: Geometric vs. Real Surface Area	25
Experimental and Reduced-Order Modeling Research of Thermal Runaway Propagation in 100 Ah Lithium Iron Phosphate Battery Module	25
Carbon-Coated CF-Si/Al Anodes for Improved Lithium-Ion Battery Performance	25
Thermal Propagation Test Bench for the Study of the Paschen Curve and Lightning Arcs of Venting Gas	25
One-Step Synthesis of Zirconium Sulfide Nanoparticles on Flexible Carbon Cloth for Supercapacitor Application	25
In Situ Metal Organic Framework (ZIF-8) and Mechanofusion-Assisted MWCNT Coating of LiFePO4/C Composite Material for Lithium-Ion Batteries	25
A Novel Stochastic Mixed-Integer-Linear-Logical Programming Model for Optimal Coordination of Hybrid Storage Systems in Isolated Microgrids Considering Demand Response	25
Recent Advances in All-Solid-State Lithium–Oxygen Batteries: Challenges, Strategies, Future	25
Porous Electrode Materials for Zn-Ion Batteries: From Fabrication and Electrochemical Application	25
Phenazine-Based Compound as a Universal Water-Soluble Anolyte Material for the Redox Flow Batteries	24
Galvanic Replacement Preparation of Spindle-Structured Sb@C@NC as Anode for Superior Lithium-Ion Storage	24
Developing an Innovative Seq2Seq Model to Predict the Remaining Useful Life of Low-Charged Battery Performance Using High-Speed Degradation Data	24
Synergistic Heteroatom Doping in Hard Carbon Anodes: Unlocking High Performance in Potassium-Ion Batteries	24
Status and Prospects of Research on Lithium-Ion Battery Parameter Identification	24
Advancements in Vibration Testing: Effects on Thermal Performance and Degradation of Modern Batteries	24
Intrinsic Thermal Stability of Li-Rich Mn-Based Cathodes Enabling Safe High-Energy Lithium-Ion Batteries	24
Predicting the Future Capacity and Remaining Useful Life of Lithium-Ion Batteries Based on Deep Transfer Learning	24
Comparative Analysis via CFD Simulation on the Impact of Graphite Anode Morphologies on the Discharge of a Lithium-Ion Battery	24
Bagging-PiFormer: An Ensemble Transformer Framework with Cross-Channel Attention for Lithium-Ion Battery State-of-Health Estimation	23
High-Performance Metal–Chalcogen Batteries	23
DC Bus Voltage Stabilization and SOC Management Using Optimal Tuning of Controllers for Supercapacitor Based PV Hybrid Energy Storage System	23
Design of Sodium Titanate Nanowires as Anodes for Dual Li,Na Ion Batteries	23
Preparing Co/N-Doped Carbon as Electrocatalyst toward Oxygen Reduction Reaction via the Ancient “Pharaoh’s Snakes” Reaction	23
Bubble Wrap-like Carbon-Coated Rattle-Type silica@silicon Nanoparticles as Hybrid Anode Materials for Lithium-Ion Batteries via Surface-Protected Etching	23
A Systematic Literature Analysis on Electrolyte Filling and Wetting in Lithium-Ion Battery Production	23
Early Detection of Short-Term Performance Degradation in Electric Vehicle Lithium-Ion Batteries via Physics-Guided Multi-Sensor Fusion and Deep Learning	23
Early Prediction of Battery Lifetime Using Centered Isotonic Regression with Quantile-Transformed Features	23
Textile PAN Carbon Fibers Cathode for High-Voltage Seawater Batteries	23
Modeling Thermal Runaway Mechanisms and Pressure Dynamics in Prismatic Lithium-Ion Batteries	23
An Empirical Multi-Stage One-Step Battery Thermal Runaway Model Based on Arrhenius Reaction Rate Formalism	23
Zinc as a Promising Anodic Material for All-Solid-State Lithium-Ion Batteries	23