OOIR: Observatory of International Research

Papers

(The H4-Index of Nano-Micro Letters is 119. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)

Article	Citations
Size-Dependent Oxidation-Induced Phase Engineering for MOFs Derivatives Via Spatial Confinement Strategy Toward Enhanced Microwave Absorption	688
A Fully-Integrated Memristor Chip for Edge Learning	438
Synergistic Optimization of Buried Interface by Multifunctional Organic–Inorganic Complexes for Highly Efficient Planar Perovskite Solar Cells	420
Multi-Bandgap Monolithic Metal Nanowire Percolation Network Sensor Integration by Reversible Selective Laser-Induced Redox	371
Flexible Polydimethylsiloxane Composite with Multi-Scale Conductive Network for Ultra-Strong Electromagnetic Interference Protection	325
Intelligent Recognition Using Ultralight Multifunctional Nano-Layered Carbon Aerogel Sensors with Human-Like Tactile Perception	311
Synthesis and Modulation of Low-Dimensional Transition Metal Chalcogenide Materials via Atomic Substitution	310
Transformative Effect of Li Salt for Proactively Mitigating Interfacial Side Reactions in Sodium-Ion Batteries	307
Correction: Initiating Binary Metal Oxides Microcubes Electromagnetic Wave Absorber Toward Ultrabroad Absorption Bandwidth Through Interfacial and Defects Modulation	306
MXene-Ti3C2Tx-Based Neuromorphic Computing: Physical Mechanisms, Performance Enhancement, and Cutting-Edge Computing	301
Tailoring Light–Matter Interactions in Overcoupled Resonator for Biomolecule Recognition and Detection	267
Two-Dimensional Metal Halides for X-Ray Detection Applications	264
Humidity Sensing of Stretchable and Transparent Hydrogel Films for Wireless Respiration Monitoring	262
p-Type Two-Dimensional Semiconductors: From Materials Preparation to Electronic Applications	253
From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO2 Nanofibers for Emerging Applications	250
Human Machine Interface with Wearable Electronics Using Biodegradable Triboelectric Films for Calligraphy Practice and Correction	238
Smart Textiles for Personalized Sports and Healthcare	238
Enabling an Inorganic-Rich Interface via Cationic Surfactant for High-Performance Lithium Metal Batteries	235
Biomimetic Micro-Nanostructured Evaporator with Dual-Transition-Metal MXene for Efficient Solar Steam Generation and Multifunctional Salt Harvesting	232
Superinsulating BNNS/PVA Composite Aerogels with High Solar Reflectance for Energy-Efficient Buildings	231
Tuning Active Metal Atomic Spacing by Filling of Light Atoms and Resulting Reversed Hydrogen Adsorption-Distance Relationship for Efficient Catalysis	229
3D Artificial Array Interface Engineering Enabling Dendrite-Free Stable Zn Metal Anode	228
Quantum Spin Exchange Interactions to Accelerate the Redox Kinetics in Li–S Batteries	227
One-Dimensional Magnetic FeCoNi Alloy Toward Low-Frequency Electromagnetic Wave Absorption	225
Enhancing Thermal Protection in Lithium Batteries with Power Bank-Inspired Multi-Network Aerogel and Thermally Induced Flexible Composite Phase Change Material	220

Screen-Printable Functional Nanomaterials for Flexible and Wearable Single-Enzyme-Based Energy-Harvesting and Self-Powered Biosensing Devices	217
Growth of Tellurium Nanobelts on h-BN for p-type Transistors with Ultrahigh Hole Mobility	215
Recent Advances in Interface Engineering for Electrocatalytic CO2 Reduction Reaction	213
Recent Progress in Interfacial Dipole Engineering for Perovskite Solar Cells	212
Highly Ordered Thermoplastic Polyurethane/Aramid Nanofiber Conductive Foams Modulated by Kevlar Polyanion for Piezoresistive Sensing and Electromagnetic Interference Shielding	211
Recent Advances in Design Strategies and Multifunctionality of Flexible Electromagnetic Interference Shielding Materials	208
Selective Emission Fabric for Indoor and Outdoor Passive Radiative Cooling in Personal Thermal Management	205
Highly Aligned Graphene Aerogels for Multifunctional Composites	205
Ultrafast Response and Threshold Adjustable Intelligent Thermoelectric Systems for Next-Generation Self-Powered Remote IoT Fire Warning	201
Exploring the Spatial Control of Topotactic Phase Transitions Using Vertically Oriented Epitaxial Interfaces	199
Aggregation-Induced Emissive Scintillators: A New Frontier for Radiation Detection and Imaging	198
Grain Boundaries Contribute to the Performance of Perovskite Solar Cells by Promoting Charge Separations	198
Zn(TFSI)2-Mediated Ring-Opening Polymerization for Electrolyte Engineering Toward Stable Aqueous Zinc Metal Batteries	193
Improved Plasmonic Hot-Electron Capture in Au Nanoparticle/Polymeric Carbon Nitride by Pt Single Atoms for Broad-Spectrum Photocatalytic H2 Evolution	192
Constructing Donor–Acceptor-Linked COFs Electrolytes to Regulate Electron Density and Accelerate the Li+ Migration in Quasi-Solid-State Battery	192
In Situ Formed Tribofilms as Efficient Organic/Inorganic Hybrid Interlayers for Stabilizing Lithium Metal Anodes	192
Absorption–Reflection–Transmission Power Coefficient Guiding Gradient Distribution of Magnetic MXene in Layered Composites for Electromagnetic Wave Absorption	191
Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis	190
Rational Design of Electrode–Electrolyte Interphase and Electrolytes for Rechargeable Proton Batteries	190
Ultra-Stable Sodium-Ion Battery Enabled by All-Solid-State Ferroelectric-Engineered Composite Electrolytes	186
Kinetic-Thermodynamic Promotion Engineering toward High-Density Hierarchical and Zn-Doping Activity-Enhancing ZnNiO@CF for High-Capacity Desalination	183
Dual-Atom Nanozyme Eye Drops Attenuate Inflammation and Break the Vicious Cycle in Dry Eye Disease	179
Recent Advances in Nano-Enabled Seed Treatment Strategies for Sustainable Agriculture: Challenges, Risk Assessment, and Future Perspectives	176
Coordination Effect-Promoted Durable Ni(OH)2 for Energy-Saving Hydrogen Evolution from Water/Methanol Co-Electrocatalysis	170
Strategies for Sustainable Production of Hydrogen Peroxide via Oxygen Reduction Reaction: From Catalyst Design to Device Setup	169
Unveiling Organic Electrode Materials in Aqueous Zinc-Ion Batteries: From Structural Design to Electrochemical Performance	168
Molecule-Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery	167
Trend of Developing Aqueous Liquid and Gel Electrolytes for Sustainable, Safe, and High-Performance Li-Ion Batteries	165
Quasi-Solid-State Ion-Conducting Arrays Composite Electrolytes with Fast Ion Transport Vertical-Aligned Interfaces for All-Weather Practical Lithium-Metal Batteries	163
Tracking Regulatory Mechanism of Trace Fe on Graphene Electromagnetic Wave Absorption	163
Photocatalytic and Electrocatalytic Generation of Hydrogen Peroxide: Principles, Catalyst Design and Performance	161
Cationic Adsorption-Induced Microlevelling Effect: A Pathway to Dendrite-Free Zinc Anodes	160
Wettability Gradient-Induced Diode: MXene-Engineered Membrane for Passive-Evaporative Cooling	160
Solar-Driven Redox Reactions with Metal Halide Perovskites Heterogeneous Structures	160
High-Density Nanowells Formation in Ultrafast Laser-Irradiated Thin Film Metallic Glass	158
Correction to: Reversible Zn2+ Insertion in Tungsten Ion Activated Titanium Dioxide Nanocrystals for Electrochromic Windows	158
Lithium Hexamethyldisilazide Endows Li\|\|NCM811 Battery with Superior Performance	155
Separator Wettability Enhanced by Electrolyte Additive to Boost the Electrochemical Performance of Lithium Metal Batteries	155
B-Bridge Regulated Asymmetric Dual-Atomic Catalysts for Synergistically Enhanced Styrene Mineralization and CO2 Reduction	154
Understanding Electrolytes and Interface Chemistry for Sustainable Nonaqueous Metal–CO2 Batteries	154
Applications of Carbon-Based Multivariable Chemical Sensors for Analyte Recognition	153
Recent Advances in Fibrous Materials for Hydroelectricity Generation	153
A Sub-Nanostructural Transformable Nanozyme for Tumor Photocatalytic Therapy	150
Multifunctional MXene for Thermal Management in Perovskite Solar Cells	149
A Selective-Response Hypersensitive Bio-Inspired Strain Sensor Enabled by Hysteresis Effect and Parallel Through-Slits Structures	149
Graphene Quantum Dot-Mediated Atom-Layer Semiconductor Electrocatalyst for Hydrogen Evolution	147
Carbon-Nitride-Based Materials for Advanced Lithium–Sulfur Batteries	146
Lessons from Nature: Advances and Perspectives in Bionic Microwave Absorption Materials	146
Sulfolane-Based Flame-Retardant Electrolyte for High-Voltage Sodium-Ion Batteries	146
Metal–Organic Framework-Based Photodetectors	144

Highly Flexible and Broad-Range Mechanically Tunable All-Wood Hydrogels with Nanoscale Channels via the Hofmeister Effect for Human Motion Monitoring	143
Self-Assembled Nanomicelles of Affibody-Drug Conjugate with Excellent Therapeutic Property to Cure Ovary and Breast Cancers	141
Covalently Bonded Ni Sites in Black Phosphorene with Electron Redistribution for Efficient Metal-Lightweighted Water Electrolysis	141
Local Strain Engineering of Two-Dimensional Transition Metal Dichalcogenides Towards Quantum Emitters	140
Super-Tough and Environmentally Stable Aramid. Nanofiber@MXene Coaxial Fibers with Outstanding Electromagnetic Interference Shielding Efficiency	139
Electron Acceptor-Driven Solid Electrolyte Interphases with Elevated LiF Content for 4.7 V Lithium Metal Batteries	139
Self-Powered, Long-Durable, and Highly Selective Oil–Solid Triboelectric Nanogenerator for Energy Harvesting and Intelligent Monitoring	139
Atomically Dispersed Transition Metal-Nitrogen-Carbon Bifunctional Oxygen Electrocatalysts for Zinc-Air Batteries: Recent Advances and Future Perspectives	137
Insights Into the Interfacial Degradation of High-Voltage All-Solid-State Lithium Batteries	136
Hydrolysis-Engineered Robust Porous Micron Silicon Anode for High-Energy Lithium-Ion Batteries	134
Advances in All-Solid-State Lithium–Sulfur Batteries for Commercialization	133
Rational Design of Cellulosic Triboelectric Materials for Self-Powered Wearable Electronics	132
Transition Metal Carbonitride MXenes Anchored with Pt Sub-Nanometer Clusters to Achieve High-Performance Hydrogen Evolution Reaction at All pH Range	131
Laser-Derived Interfacial Confinement Enables Planar Growth of 2D SnS2 on Graphene for High-Flux Electron/Ion Bridging in Sodium Storage	131
Ultrafast Synthesis of Metal-Layered Hydroxides in a Dozen Seconds for High-Performance Aqueous Zn (Micro-) Battery	131
A Self-Healing Optoacoustic Patch with High Damage Threshold and Conversion Efficiency for Biomedical Applications	131
Boosting the Electrochemical Performance of Li- and Mn-Rich Cathodes by a Three-in-One Strategy	130
Correction to: Prussian Blue Analogues in Aqueous Batteries and Desalination Batteries	130
High Conduction Band Inorganic Layers for Distinct Enhancement of Electrical Energy Storage in Polymer Nanocomposites	129
Stress and Strain in Perovskite/Silicon Tandem Solar Cells	129
Cavity-Suppressing Electrode Integrated with Multi-Quantum Well Emitter: A Universal Approach Toward High-Performance Blue TADF Top Emission OLED	127
Unraveling Passivation Mechanism of Imidazolium-Based Ionic Liquids on Inorganic Perovskite to Achieve Near-Record-Efficiency CsPbI2Br Solar Cells	126
Performance Limits and Advancements in Single 2D Transition Metal Dichalcogenide Transistor	126
Electrochemically Grown Ultrathin Platinum Nanosheet Electrodes with Ultralow Loadings for Energy-Saving and Industrial-Level Hydrogen Evolution	126
Interface Engineering of NixSy@MnOxHy Nanorods to Efficiently Enhance Overall-Water-Splitting Activity and Stability	125
Skin-Friendly Large Matrix Iontronic Sensing Meta-Fabric for Spasticity Visualization and Rehabilitation Training via Piezo-Ionic Dynamics	125
A Stable Open-Shell Conjugated Diradical Polymer with Ultra-High Photothermal Conversion Efficiency for NIR-II Photo-Immunotherapy of Metastatic Tumor	125
Fast-Developing Dynamic Radiative Thermal Management: Full-Scale Fundamentals, Switching Methods, Applications, and Challenges	125
Atomically Dispersed Dual-Metal Sites Showing Unique Reactivity and Dynamism for Electrocatalysis	125
Highly Efficient Back-End-of-Line Compatible Flexible Si-Based Optical Memristive Crossbar Array for Edge Neuromorphic Physiological Signal Processing and Bionic Machine Vision	124
Synthesis Strategies and Multi-field Applications of Nanoscale High-Entropy Alloys	123
Induction Effect of Fluorine-Grafted Polymer-Based Electrolytes for High-Performance Lithium Metal Batteries	123
Tailoring MXene Thickness and Functionalization for Enhanced Room-Temperature Trace NO2 Sensing	122
Anti-Overturning Fully Symmetrical Triboelectric Nanogenerator Based on an Elliptic Cylindrical Structure for All-Weather Blue Energy Harvesting	122
Unleashing the Potential of Electroactive Hybrid Biomaterials and Self-Powered Systems for Bone Therapeutics	122
Origin of Excellent Charge Storage Properties of Defective Tin Disulphide in Magnesium/Lithium-Ion Hybrid Batteries	122
Integration of Electrical Properties and Polarization Loss Modulation on Atomic Fe–N-RGO for Boosting Electromagnetic Wave Absorption	120
M4X3 MXenes: Application in Energy Storage Devices	120
Iodine Promoted Ultralow Zn Nucleation Overpotential and Zn-Rich Cathode for Low-Cost, Fast-Production and High-Energy Density Anode-Free Zn-Iodine Batteries	120
Interfacial Electronic Modulation of Dual-Monodispersed Pt–Ni3S2 as Efficacious Bi-Functional Electrocatalysts for Concurrent H2 Evolution and Methanol Selective Oxidation	120
Atomic Cu Sites Engineering Enables Efficient CO2 Electroreduction to Methane with High CH4/C2H4 Ratio	120
Biodegradable, Super-Strong, and Conductive Cellulose Macrofibers for Fabric-Based Triboelectric Nanogenerator	119
Nanoengineered Shear-Thinning Hydrogel Barrier for Preventing Postoperative Abdominal Adhesions	119
Engineered Cancer Nanovaccines: A New Frontier in Cancer Therapy	119