Frontiers in Materials

Article	Citations
Editorial: Machining technology and environmental degradation mechanism of surface microstructure of special materials, volume II	146
Editorial: 2022 retrospective: polymeric and composite materials	107
Editorial: The role of polymer hydrogels in the bio-medical field	93
Energy dissipation properties of backfill materials under compaction in solid waste backfill mining	93
Creep subsidence prediction algorithm considering the effect of stress history for subgrades	92
High-efficiency adsorption of Cd2+ and Cr3+ by sodium vanadate nanowire arrays	91
Editorial: Editors’ showcase: Colloidal materials and interfaces	85
Effect of InxAl1-xAs graded buffer materials on pseudomorphic InP HEMT	81
The corrosion behavior and tensile strength of the 2060 Al-Li alloy with different heat treatments	78
Icy-hot: decoupled compute paradigm towards a general-purpose superconducting CPU design	78
Bibliographic trends in mineral fiber-reinforced concrete: A scientometric analysis	76
Research on the coupling effect of film thickness and UV aging cycle on the rheological properties and microstructure evolution law of asphalt	76
Editorial: Bioactive coatings: advancing bone implant performance and longevity	75
Influence of aggregate chemical composition on the demulsification rate of emulsified asphalt	71
Fabrication and performance of the wide-band highly shielded polyvinylidene fluoride film	68
Modeling of temperature dependence of Λ-graded InGaN solar cells for both strained and relaxed features	65
Sol-gel synthesis of magnesium aluminate and synergistic degradation of Cr(VI) ion by adsorption and photocatalysis	65
Editorial: Deep learning in computational materials science	64
Multi-field numerical model and LSTM-based neural networks for thermal field predictions of concrete-filled steel tubes	64
Predicting environmental biodegradability using initial rates: mineralization of cellulose, guar and their semisynthetic derivatives in wastewater and soil	62
Finite element and theoretical investigations on PVC–CFRP confined concrete columns under axial compression	58
Application of the ANN with swarm optimization algorithm in layer property backcalculation for asphalt pavement	54
Study of MASnI3 perovskite photodetectors prepared by the inverse temperature crystallization method in ambient atmosphere and the spin coating method in a glovebox	50
Effect of recycled molybdenum tailings on mechanical properties of ultra-high-performance concrete	49
Application of magnetic analyzers for detecting carburization of pyrolysis furnace tubes	49

The impact of granite powder on the performance and hydration of concrete	48
Analysis of free and forced convections in the flow of radiative viscous fluid with oxytactic microorganisms	45
An experimental study on the impact resistance of a new three-wave beam steel guardrail	44
Analytical model for the load-slip relationship of bearing-shear connectors	43
Preparation and properties of lightweight and high-strength building ceramsites with oil-based drilling cuttings pyrolysis residues	43
Analysis of the deterioration process of the dolomite with the interlayer in different directions during wetting	43
A bibliometric analysis and review on the performance of polymer-modified bitumen	42
Guided tissue remineralization and its effect on promoting dentin bonding	42
Fabrication of polymeric composite GTR membrane from eggshell powder, polylactic acid and polyethylene glycol for periodontal application: in vitro evaluation	41
Molecular simulation and experimental investigation on enhancement of microbe cement in municipal solid waste incineration fly ash	40
Failure modes and mechanical properties of double-layer rock-like composite specimens with a single fissure under triaxial compression	40
Utilization of sodium carbonate activator in strain-hardening ultra-high-performance geopolymer concrete (SH-UHPGC)	39
Mechanical performance and carbonation resistance of basalt fiber—polypropylene fiber rubber concrete	39
MPX3 van der Waals magnets under pressure (M = Mn, Ni, V, Fe, Co, Cd; X = S, Se)	39
Flexural capacity of fiber reinforced polymer sea sand seawater concrete: reliability analysis and calibration of partial factor	39
Adsorption of Ni2+, Cu2+ and Co2+ ions on coal gangue-based porous ceramics	39
Performance evaluation of a HMA pavement longitudinal joint containing a void reducing asphalt membrane (VRAM)	38
Impact of salt erosion on mechanical and drying shrinkage performance of cement stabilized macadam	38
Effect of different fly ash ratios on the mechanical properties of hybrid steel fiber reinforced concrete	38
Dynamic cyclic fatigue resistance of NiTi instruments in a double-curved stainless steel canal with variable distances of displacement	37
Role of carbon sequestration methods in enhancing water holding capacity of dredged Yellow River sediment: biochar and CO2 utilization	36
Performance analysis of the functionally graded flexoelectric-piezoelectric energy harvesting	36
Research progress of 3D printing combined with thermoplastic foaming	36
D-amino acid/gentamicin loaded zwitterionic hydrogel coatings with optimized mechanical stability and biofilm inhibition capabilities	36
CNT-doped transition metal carbide enables sensitive organic electrochemical transistor based carcinoembryonic antigen aptasensor towards precise lung cancer diagnosis	35
Effect of annealing temperature on microstructure, texture and tensile properties of TC4 titanium alloy wire	35
Mechanism of long-term strength retrogression of silica-enriched Portland cement assessed by quantitative X-ray diffraction analysis	34
Interface structure between Nb thin film and MgO(112) substrate: A first-principles prediction	33
Nanocrystal formation during thermal treatment of phosphoric-acid-swollen polybenzimidazole membranes	32
Simulation and analysis of residual stress in 17-7 PH stainless steel welded joints using laser shock peening technology	31
Effect of polypropylene fibre on cementitious mortar early shrinkage cracking using the eccentric-ring test	31
A modified lower-order theory for FG beam with circular cross-section	31
Statistical analysis of apparent morphology and characteristics of corroded rebars of concrete in the marine environment	31
High-performance optoelectronic devices based on TeOx nanowires: synthesis, characterization and photodetection	31
Impact of ethanol-assisted and non ethanol-assisted mixing methods on the mechanical properties of impregnated polymethylmethacrylate with MgO and Ag nanoparticles	31
Simple acoustic metagrating for perfect two- and three-beam splitting	30
Effects of nano-TiC and nano-CaCO3 on steel fiber-reinforced cementitious mortar: a study on mechanical properties and freeze-thaw performance	30
Structural and mechanical properties of Cu-SiCp nanocomposites fabricated by accumulative roll bonding (ARB)	30
Temperature field study of LSAM-50 flexible base asphalt pavement	30
Natural polysaccharide-based hydrogel bioprinting for articular cartilage repair	29
A phase-field model with irradiation-enhanced diffusion for constituent redistribution in U-10wt%Zr metallic fuels	29
Feasibility study of replacing part of cement by igneous rock powder as cementitious material: based on mortar macroscopic properties and microstructure	29
Interfacial intermetallic compound modification to extend the electromigration lifetime of copper pillar joints	28
Effect of RAP surface modification on mechanical properties of stable crushed gravel with mineral admixture	28
Advances in highly hydrided palladium	27
The promotion effect of uniaxial strain on hydrogen aggregation in tungsten	27
Study on a rock mass constitutive model considering the sliding-closing mechanical behavior of joints under cyclic loading	27
Investigation on characteristics and performance of bearing spacer ring	27
Intelligent optimisation design of hydraulic presses for composite material forming based on the synergy of an enhanced particle swarm fuzzy control algorithm and an adaptive robust controller	27
Editorial: Materials for thermal safety enhancement in energy industries	27

Research and application of high-performance artificial aggregates based on 3D printing	27
Characterizing pearlite transformation in an API X60 pipeline steel through phase-field modeling and experimental validation	26
Study on the relationship between the particle size distribution characteristics of ground granulated blast furnace slag and its mortar properties	26
Sustainability assessment of different pipeline materials in freshwater supply systems	26
Stress concentration characteristics and coefficient modification for DC04 steel with holes of finite thickness	26
Corrigendum: Electrospun polycaprolactone/silk fibroin nanofiber scaffold with aligned fiber orientation for articular chondrocyte regeneration	26
From quartzose sandstone to metallurgical grade silicon feedstock for photovoltaics: an integrated sieving, magnetic separation and acid leaching protocol	26
Recent progress in piezoelectric thin films as self-powered devices: material and application	26
The rise of aerial additive manufacturing in construction: a review of material advancements	25
Programmable metasurface RCS prediction under obstacles based on DNN	25
Room temperature magnetoelectric magnetic spirals by design	25
Hydroxyapatite-collagen- carboxylic carbon quantum dot composite loaded with chrysin supported the proliferation and differentiation of human bone marrow derived mesenchymal stem cells	25
Theoretical and simulation analysis on the spatial resolution of magnetic metal debris sensors	25
Research on residual stress and hydrogen diffusion of X80 pipeline welded joint	25
Finite element, analytical, artificial neural network models for carbon fibre reinforced polymer confined concrete filled steel columns with elliptical cross sections	25
Characterization and performance evaluation of fully biocompatible gelatin-based humidity sensor for health and environmental monitoring	25
Fractional derivative-based normalized viscoelastic model of strain-hardening clays	24
Experimental study on the seismic performance of concrete-filled steel tube columns with a multiple-chamber round-ended cross-section	24
TiAlNb alloy interatomic potentials: comparing passive and active machine learning techniques with MTP and DeePMD	24
Acoustic and mechanical metamaterials for various applications – a brief review	24
Prediction of compressive strength of high-performance concrete based on multiple machine learning models	24
Preparation of geopolymer for in-situ pavement construction on the moon utilizing minimal additives and human urine in lunar regolith simulant	24
Physics-based manifold learning in scaffolds for tissue engineering: Application to inverse problems	23
Transport properties of moisture and ionic chelators in concrete	23
The kinetics of hydrogen peroxide reduction on rare earth doped UO2 and SIMFUEL	23
Preparation and properties of vanillin-based polyurethane materials for body temperature self-healing	23
Study on the mechanical properties of embankment soil under long-term immersion conditions	23
Editorial: 2022 retrospective: thin solid films	23
Advances in improving tribological performance of titanium alloys and titanium matrix composites for biomedical applications: a critical review	23
Preparation and photocatalytic activity of mesoporous CeO2-TiO2 mixed oxides	22
Molecular dynamics simulation of nanocrack closure mechanism and interface behaviors of polycrystalline austenitic steel	22
Refined numerical study on the effect of grouting plumpness on bearing behavior of pipe roof	22
Radar absorbing properties of different size carbon nanotube reinforced polymer composites	22
3D flexible displacement sensor for highly sensitive movement measurement assisted by the terahertz imaging system	22
Optimization ratios and multi factor service adaptability of cement-GGBFS stabilized silt in pavement structures	22
Editorial: Advances in computational modeling of additive manufacturing processes	22
Thermal performance customization of polyimide films by nanocomposite engineering with Al2O3 and ZnO nanoparticles	22
Editorial: 2022 retrospective, carbon-based materials	22
Effects of laser energy density on morphology features and microstructures of the single molten track in selective laser melting	22
Research on the effect of sizing agent on the interface and compression performance of carbon fiber composites	22
Fabrication and hardness of in-situ Al3Ti–Al2O3 composite	21
A comparative study of Sr-loaded nano-textured Ti and TiO2 nanotube implants on osseointegration immediately after tooth extraction in Beagle dogs	21
AI-driven prediction of the impermeable boundary in karst rock mass for optimized anti-seepage curtain design	21
Efficiency enhancement of non-fullerene organic solar cells using PEDOT:PSS diluted with alcohol solvents as the hole transport layer	21
Al-induced microstructure regularization enabling 115.2 cm2/Vs field-effect mobility in InSnZnO thin-film transistors with an amorphous front-channel	21
Process-dependent ferroelectric and memristive properties in polycrystalline Ca:HfO2-based devices	21
Flow and heat transfer analysis on micropolar fluid through a porous medium between a clear and Al2O3−Cu/H2O in conducting field	21
Corrigendum: Fabrication, properties and biological activity of a titanium surface modified with zinc via plasma electrolytic oxidation	21
Comparative investigation of fractional bioconvection and magnetohydrodynamic flow induced by hybrid nanofluids through a channel	21
Barrier-free duct muffler for low-frequency sound absorption	21
Microstructure, interfacial reaction and shearing property of Sn-58Bi solder joints reinforced by Zn particles during isothermal aging	21
Nonlinear dynamics and stability analysis of locally active Mott memristors using a physics-based compact model	21
A crystal plasticity FEM study on the deformation behaviours of bicrystals composites for potential use as load-bearing implants	21
Synthesis, antioxidant, and antimicrobial evaluation of novel 2,3-dihydro-1H-pyrazole-4-carbonitrile derivatives using K2CO3/glycerol as a green deep eutectic solvent	20
Evaluating the performance of surfactant and charcoal-based cleaning products to effectively remove PAHs from firefighter gear	20
Structural materials in Frontiers in Materials, 10 years on	20
Study on dynamic mechanical properties of frozen weakly cemented rock under lateral constraint	20
A control method for hydraulic fracturing of the hard roof with long and short boreholes	20
Effect of phosphorus and fluorine impurities on the properties and hydration mechanism of α-hemihydrate gypsum composite cementitious materials	20
Application of modified sodium alginate hydrogel for interventional embolization of hemorrhagic diseases	20
Insights on the performance of sintered silt ash-blended cement: experiments and thermodynamic simulation	20
Simulation study on the size effect of joint roughness on bulk modulus	20
Experimental study on the disintegration behavior and mechanism of red-bed mudstone in guangxi, China	19
Airport pavement performance evaluation of pavement fog seal based on optimized test technology	19
Gas-assisted electrospinning of high-performance ceramic fibers: Optimal design modelling and experimental results of the gas channel of the nozzle	19
Thermal performance of thermoplastic polyurethane composites with microencapsulated piperazine pyrophosphate	19
10 years of frontiers in carbon-based materials: carbon, the “newest and oldest” material. The story so far	19
Performance study and application of the clay-cement composite grouting material in karst strata with dynamic water	19
Study on the effect of activated coal gangue on the mechanical and hydration properties of cement	19
Study on permanent deformation properties of construction waste soil under traffic loading	19
Integrated approaches to selection control, microstructural analysis, and reliability assessment for bare dies	18
Data-driven prediction and engineering validation of early-age autogenous shrinkage in UHPC	18
Processing, microstructure, properties, and applications of MoSi2-containing composites: a review	18
Coaxially swirled porous disks flow simultaneously induced by mixed convection with morphological effect of metallic/metallic oxide nanoparticles	18
Influence of Xanthan gum on the engineering properties and microstructure of expansive soils	18
Synthesis of graphene oxide (GO) and reduced graphene oxide (rGO) and their application as nano-fillers to improve the physical and mechanical properties of medium density fiberboard	18
Multi-scale analysis of the synergistic strengthening effect of silane coupling agent on PVA and cement interface	18
Influence of print speed and nozzle diameter on the fiber alignment in 3D printed ultra-high-performance concrete	18
Addressing energy challenges: sustainable nano-ceramic electrolytes for solid-state lithium batteries by green chemistry	18
Science for sustainability as nano-revolution in natural dyeing of cotton	18

Investigation of glass bonding and multi-layer deposition during filament-based glass 3D printing	18
Assessment of enamel demineralization, shear bond strength, and failure mode following the use of orthodontic adhesive containing silver nanoparticles: an in-vitro study	18
Development of micromechanical model of asphalt mixture in complex form for dynamic modulus characterization	17
A theoretical model and verification of soil column deformation under impact load based on the Duncan-Chang model	17
Pavement dynamic monitoring data processing based on wavelet decomposition and reconfiguration methods	17
Constitutive models for SPA-H weathering steel under coupled process and atmospheric corrosion	17
Revisiting polymer crystallization kinetics: experimental validation of the Mo equation for modified PET systems	17
Structural control of nanoporous frameworks consisting of minimally stacked graphene walls	17
Study on the vibration suppression mechanisms of the lightweight flexible metamaterial sticker with non-independent resonators	17
Experimental study on bond failure characteristics of ribbed CFRP bars embedded in ultra-high-performance concrete	17
Experimental and numerical analysis of the consolidation process for additive manufactured continuous carbon fiber-reinforced polyamide 12 composites	17
A comparative study of InGaAs/InAsSb and InAs/InAsSb strained layer superlattices	17
Cu-loaded polyurethane to reduce ureteral stent microbes adherence and regulation of the inflammation response to RAW264.7	17
Flexural behavior of a UHPC slab - FRP truss hybrid beam implementing a novel FRP joint and tailored shear connector	17
Editorial: Uncertainty quantification in characterization, modelling, and design of materials	17
Heterostructured Ti3C2Tx/carbon nanohorn-based gas sensor for NH3 detection at room temperature	16
Smart responsive hydrogels for intervertebral disc regeneration	16
Influence of prepreg parameters on the interlaminar consolidation of fiber reinforced thermoplastic laminates manufactured by vacuum-bag-only process	16
Study of the properties of high silicon aluminum alloy by laser welding	16
Design of sustainable geopolymeric matrices for encapsulation of treated radioactive solid organic waste	16
Dependence of microstructural evolution on the geometric structure for serviced DZ125 turbine blades	16
First-principles investigation of NaX(Mn,Ti)O2 cathode material for rechargeable sodium-ion batteries	16
Durability behavior of asphalt mixtures in regard to material properties and gradation type	16
Machine vision system for digital twin modeling of composite structures	16
Interpretable machine learning for understanding compositional and testing condition effects on refractive index, density, dielectric constant, and loss tangent of inorganic melts and glasses	16
Vat polymerization-based 3D printing of nanocomposites: A mini review	16
A novel differential evolution algorithm for a flange coupling using ANSYS simulations	16
Mechanical properties and deformation behavior of a high entropy alloy with precipitate under cycle loading	16
Experimental-numerical investigation on the performance of basalt fiber reinforced asphalt mixture	16
Research on the dispersion of carbon fiber and recycled carbon fiber in cement-based materials: a review	16
Nanotexturing TiO2 over carbon nanotubes for high-energy and high-power density pseudocapacitors in organic electrolytes	16
Detection of cracks in cemented loess of ancient buildings using remote sensing	16
Nonlinear regression modeling of swelling characteristics in cracked expansive soil: integrating crack, moisture, density, and load effect	16
Damage localization method using ultrasonic lamb waves and Wav2Vec2.0 neural network	16
Editorial: Recent advances in flame retardant polymeric materials and composites	16
Stainless steel selection tool for water application: pitting engineering diagrams	16
Deep learning-based image classification for microstructural analysis in computational materials science	15
Experimental study on the bearing property of the composite foundation with stiffened deep cement mixing pile based on the PHC pile	15
Development of polymeric nanofibers blended with extract of neem (Azadirachta indica), for potential biomedical applications	15
Spent lithium manganate batteries for sustainable recycling: A review	15
The application of drug loading and drug release characteristics of two-dimensional nanocarriers for targeted treatment of leukemia	15
Female firefighters’ increased risk of occupational exposure due to ill-fitting personal protective clothing	15
Experimental study on chemical compatibility of polymer amended bentonite subjected to inorganic salt solutions	15
Absorbent material composition prediction based on multi-objective regression with value stacking and selection	15
Development and antioxidant evaluation of mango leaf (Mangifera indica L.) extract loaded silk fibroin nanoparticles	15
Preparation of aldehyde-graphene quantum dots from glucose for controlled release of anticancer drug	15
From damage control to definitive reconstruction: biomaterials in traumatic bone defect repair	15
Influence of pre-wetted process on the performance and enhancement mechanism of recycled fine aggregate geopolymer concrete	15
Correction: Application of modified sodium alginate hydrogel for interventional embolization of hemorrhagic diseases	15
A preliminary investigation of incorporating cellulose nanocrystals into engineered cementitious composites	15
An overview of carbon-carbon composite materials and their applications	15
Environmental protection clothing design and materials based on green design concept	15
Analysis of unsteady thin film flows over the porous and moving surfaces of variable thickness: Unsteady and non-linear kinematics of sheet	15
Electrical tree growth behavior at the silicone gel/ceramic substrate interface under pulse voltage and high temperature	15
Determination of fiber orientation model parameters for injection molding simulations via automated metamodel optimization	15
Editorial: Mechanical properties of advanced materials and structures for energy absorption	14
The effect of Te-based lead-free glass powder containing Ge and Ag+ on the contact formation and electrical performance of silicon solar cells	14
Study on anti-segregation performance of cement stabilized macadam and its impact on mechanical and shrinkage properties	14
Selected challenges in solidification processing of graphene nanoplatelets (GNPs) reinforced aluminum alloys composites	14
Editorial: Structural applications of concrete with recycled solid wastes and alternatives for cement	14
Design of a 2-Bit wide-angle coding metasurface for bistatic RCS reduction	14
Exploring tribological properties in the design and manufacturing of metal matrix composites: an investigation into the AL6061-SiC-fly ASH alloy fabricated via stir casting process	14
Application of anticorrosive materials in cement slurry: Progress and prospect	14
Field experimental study on stratum classification of marine engineering based on cone penetration test	14
Editorial: Modeling and experimentation of imperfections in materials	14
Evaluation of draping simulations by means of 3D laser scans and robot supported fiber angle scans	14
In-pile performance of end plug with different structure for SiC cladding	14
Effect of steel slag contents on road performance of rubber-modified permeable asphalt mixtures	14
An interpretable stacking ensemble model for high-entropy alloy mechanical property prediction	14
Upconversion nanocomposite for ROS-responsive diagnosis and hydrogen therapy of osteoarthritis	14
The 4-Octahedra model	14
Synthesis of trackless emulsified asphalt tack coat with gradient distribution of polyurethane via self-migration and its performance evaluation	14
Spinel-functionalized bamboo-derived hierarchical carbon: dual activation strategy for synergistic double-layer/pseudocapacitance energy conversion	14
Mechanical, thermal, and structural investigations of chemically strengthened Na2O–CaO–Al2O3–SiO2 glasses	14
Mechanical response characteristics of different asphalt pavement structures under realistic tire loading conditions	14
A safety assessment approach to pressure vessels based on machine learning	14
Enhancing material property prediction with ensemble deep graph convolutional networks	14
Valorization of nopal wastes to produce quantum dots: optimizing synthesis and exploring in smart textile applications	14
Editorial: Asphalt pavement performance under complex service conditions	14
Editorial: Biologically inspired Artificial Intelligent systems: state and perspectives	14
Engineered cellulose hydrogels: multifunctional platforms for innovative stomatological therapies and precision medicine	14
Experimental and numerical analysis on frost heave cracking of prestressed high-strength concrete (PHC) pipe piles in cold regions	14
Research on the resistance of cement-based materials to sulfate attack based on MICP technology	14
Retraction: Application of periodic structural wave impeding block for vibration isolation in foundation	13
Development of flax/basalt/PA11 bio-composites: optimal formulation and modelling of the quasi-static behaviour	13
Editorial: Multifunctional nanomaterials: stand in the center of cancer therapy as well as tissue regeneration and repair	13
Synthesis of PVA-based macromolecular photoinitiators through esterification with TXOCH₂COOH and cysteine, and investigation of their photophysical properties: in situ fabrication of flexible nanocomp	13
Impact of microcrystalline cellulose extracted from walnut and apricots shells on the biodegradability of Poly (lactic acid)	13
Analysis of microstructural evolution and mechanical properties of FGH101 powder superalloy and IN718 deformed superalloy via inertia friction welding	13
Numerically efficient analysis of FRP confined CFST members under lateral low-velocity impact loading	13
In vitro physicochemical and biological properties of titanium alloy, zirconia, polyetheretherketone, and carbon fiber-reinforced polyetheretherketone	13
Engineered bone cement trigger bone defect regeneration	13
Preparation and properties of antistatic high-strength aramid III/MWCNTs-OH fibers	13
Tracking the chemical life histories of spruce resin-beeswax mixtures through degradation experiments using reflectance-mode FTIR	13
Corrosion fatigue performance of modified 17-4PH in simulated geothermal environment	13