Iranian Journal of Science and Technology-Transactions of Civil Engine

(The median citation count of Iranian Journal of Science and Technology-Transactions of Civil Engine is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 500 papers]. The publications cover those that have been published in the past four years, i.e., from 2019-10-01 to 2023-10-01.)
Comparison of Existing Empirical Equations for Blast Peak Positive Overpressure from Spherical Free Air and Hemispherical Surface Bursts39
Estimation of Actual Evapotranspiration Using Soil Moisture Balance and Remote Sensing36
Finite Difference Modelings of Groundwater Flow for Constructing Artificial Recharge Structures27
Concrete Road Crack Detection Using Deep Learning-Based Faster R-CNN Method26
Effect of SiO2 and ZnO Nano-Composites on Mechanical and Chemical Properties of Modified Concrete25
Investigation on the Effect of Seawater Condition, Sulphate Attack, Acid Attack, Freeze–Thaw Condition, and Wetting–Drying on the Geopolymer Concrete22
An Integrated Framework for Optimal Irrigation Planning Under Uncertainty: Application of Soil, Water, Atmosphere and Plant Modeling20
Influence of Incorporation of Colloidal Nano-Silica on Behaviour of Concrete20
Setting Time, Workability and Strength Properties of Alkali Activated Fly Ash and Slag Based Geopolymer Concrete Activated with High Silica Modulus Water Glass19
Rheological and Mechanical Properties, Acid Resistance and Water Penetrability of Lightweight Self-Compacting Concrete Containing Nano-SiO2, Nano-TiO2 and Nano-Al2O318
Estimation of UCS-FT of Dispersive Soil Stabilized with Fly Ash, Cement Clinker and GGBS by Artificial Intelligence16
Durability Properties of Geopolymer Mortars Containing Slag16
Damage and Damping Identification in a Structure Through Novel Damped Updating Method16
Deformation Properties of Rubberized Engineered Cementitious Composites Using Response Surface Methodology16
Novel Hybrid Method in Time–Cost Trade-Off for Resource-Constrained Construction Projects15
Application of Multivariate Adaptive Regression Splines and Classification and Regression Trees to Estimate Wave-Induced Scour Depth Around Pile Groups15
Effect of Dry–Wet and Freeze–Thaw Repeated Cycles on Water Resistance of Steel Slag Asphalt Mixture15
Streamflow Prediction Based on Artificial Intelligence Techniques15
Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications14
Influence of Construction Risks on Cost Escalation of Highway-Related Projects: Exploring the Moderating Role of Social Sustainability Requirements14
Microstructure and Durability of Ground Granulated Blast Furnace Slag Cement Mortars13
Damage Localization in Laminated Composite Beams with Multiple Edge Cracks Based on Vibration Measurements13
Guided Water Strider Algorithm for Structural Damage Detection Using Incomplete Modal Data12
Estimating the Optimal Mixture Design of Concrete Pavements Using a Numerical Method and Meta-heuristic Algorithms12
Investigating Permanent Deformation of Recycled Asphalt Concrete Containing Waste Oils as Rejuvenator Using Response Surface Methodology (RSM)12
Comparative Study on the Machine Learning and Regression-Based Approaches to Predict the Hydraulic Jump Sequent Depth Ratio12
Ultra-High Performance Hybrid Polyvinyl Alcohol-Polypropylene Fiber-Reinforced Cementitious Composites with Augmented Toughness and Strain-Hardening Behavior12
Fiber Type and Curing Environment Effects on the Mechanical Performance of UHPFRC Containing Zeolite12
An Investigation on performance of the cut off wall and numerical analysis of seepage and pore water pressure of Eyvashan earth dam11
Effect of Gradation and Morphological Characteristics of Aggregates on Mechanical Properties of Bituminous Concrete and Dense Bituminous Macadam11
Shuffled Shepherd Optimization Method Simplified for Reducing the Parameter Dependency11
Experimental Investigation of Collapsible Soils Treatment Using Nano-silica in the Sivand Dam Region, Iran11
Condition Assessment of Civil Structures for Structural Health Monitoring Using Supervised Learning Classification Methods11
Experimental and Modeling Investigation of Physicomechanical Properties and Firing Resistivity of Cement Pastes Incorporation of Micro-Date Seed Waste11
Experimental Study on Strength Characteristics of Expansive Soil Improved by Steel Slag Powder and Cement Under Dry–Wet Cycles11
Improvement of Mechanical and Microstructure Properties of Modified Fly Ash-Blended Low Carbon Cement with Hydroxy Propyl Methyl Cellulose Polymer11
Bond Behavior Investigation Between Steel Reinforced Grout Composites and Masonry Substrate10
Fresh, mechanical, sorptivity and rapid chloride permeability properties of self-compacting concrete with silica fume and fly ash10
Mechanical and Durability Properties of Concrete Containing Recycled Concrete Aggregates10
Experimental and Numerical Investigation on Flexural and Crack Failure of Reinforced Concrete Beams with Bottom Ash and Fly Ash10
Fresh and Hardened Properties of High Calcium Fly Ash-Based Geopolymer Matrix with High Dosage of Borax10
The Relationship Between Concrete Strengths Obtained by Destructive and Non-destructive Methods10
Scour Evolution Around Bridge Piers Under Hydrographs with High Unsteadiness10
Vision-Based Crack Detection of Asphalt Pavement Using Deep Convolutional Neural Network10
A Proposed Mix Design of Concrete with Supplementary Cementitious Materials by Packing Density Method10
Comparison Between Two Nonlinear Models to Predict the Stress–Strain Behavior, Modulus of Elasticity, and Toughness of the Flowable Cement Paste10
Model Technics to Predict the Impact of the Particle Size Distribution (PSD) of the Sand on the Mechanical Properties of the Cement Mortar Modified with Fly Ash10
Investigating the Efficiency of Swarm Algorithms for Bridge Strengthening by Conversion to Tied-Arch: A Numerical Case Study on San Luis Bridge10
Development of a New Stacking Model to Evaluate the Strength Parameters of Concrete Samples in Laboratory10
Optimization of Design Parameters of Slag-Corncob Ash-Based Geopolymer Concrete by the Central Composite Design of the Response Surface Methodology10
Crack Spacing Prediction of Fibre-Reinforced Concrete Beams with Lap-Spliced Bars by Machine Learning Models9
Insight to the Newmark Implicit Time Integration Method for Solving the Wave Propagation Problems9
Effect of Fillet Radii on Moment Carrying Capacity of Sinusoidal Web Opening Castellated Steel Beams in Comparison with Hexagonal Web Openings9
Geopolymer Synthesis with Low Sodium Hydroxide Concentration9
Optimum Design of Castellated Beams Using Four Recently Developed Meta-heuristic Algorithms9
Structural Behavior of Masonry Panels Strengthened Using Geopolymer Composites in Compression Tests9
Application of ANFIS–PSO Hybrid Algorithm for Predicting the Dimensions of the Downstream Scour Hole of Ski-Jump Spillways9
A Review of Different Assessment Methods of Corrosion of Steel Reinforcement in Concrete9
Application AHP-PROMETHEE Technic for Landfill Site Selection on Based Assessment of Aquifers Vulnerability to Pollution9
Evaluation of Buckling Resistance of Basalt Fiber Reinforced Polymer Plate8
A Multistage Damage Detection Approach Using Graph Theory and Water Strider Algorithm8
Experimental Investigation of Scour Reduction Around Spur Dikes by Collar Using Taguchi Method8
Performance Evaluation of Quarry Dust Treated Expansive Clay for Road Foundations8
System Dynamics Outlook on BIM and LEAN Interaction in Construction Quantity Surveying8
A SAFSA- and Metabolism-Based Nonlinear Grey Bernoulli Model for Annual Water Consumption Prediction8
Risk Assessment of Water Treatment Plants Using Fuzzy Fault Tree Analysis and Monte Carlo Simulation8
Experimental Study on the Effect of Thickness and Level of the Collar on the Scour Pattern in 180° Sharp Bend with Bridge Pier8
An Experimental Study on Cyclic Performance of the Geometrically Prismatic Concrete-Filled Double Skin Steel Tubular (CFDST) Columns8
The Effect of Inclined Pair Piers on Bed Topography: Clear Water, Incipient Motion and Live Bed8
Size, Layout, and Topology Optimization of Skeletal Structures Using Plasma Generation Optimization8
Estimation of Wind Load on Stepped Tall Building Using CFD Simulation8
Assessment of Mechanical and Impact Resistance Properties of Rubberized Concrete After Surface Modification of Rubber Crumb7
Development of Optimization Model to Reduce Unloading and Loading Time at Berth in Container Ports7
Nonlinear Seismic Performance of Nuclear Structure with Soil–Structure Interaction7
Investigation of the Thermal and Mechanical Properties of Organic Waste Reinforced Polyester Composites7
A Systematic Analysis of Construction Performance Management: Key Performance Indicators from 2000 to 20207
Influence of Freeze–Thaw Cycles on Thermal Conductivity, Water Permeability and Mechanical Properties of Asphalt Mixtures7
A Review: Influence of Potential Nanomaterials for Civil Engineering Projects7
Carbon Emission Characteristics of Resource-Based Cities in China7
A Novel Hybrid Algorithms for Groundwater Level Prediction7
Investigating the Effect of Horizontal Screen on Hydraulic Parameters of Vertical Drop7
Exact Stiffness Matrices for Lateral–Torsional Buckling of Doubly Symmetric Tapered Beams with Axially Varying Material Properties7
Damage Assessment of Reinforced Concrete-Framed Building Considering Multiple Demand Parameters in Indian Codal Provisions7
Mechanical and Rheological Properties of Self-Compacting Concrete Containing Al2O3 Nanoparticles and Silica Fume7
Evaluation of Stability and Erosion Characteristics of Soil Embankment Slope Reinforced with Different Natural Additives7
Sulphuric Acid Resistance of Slag Geopolymer Concrete Modified with Fly Ash and Silica Fume7
Evaluating Efficiency in Construction Projects with the TOPSIS Model and NDEA Method Considering Environmental Effects and Undesirable Data7
Evaluation of Durability and Microstructural Properties of Geopolymer Concrete with Ferrochrome Slag as Coarse Aggregate7
Magnesium Sulfate (MgSO4) Attack and Chloride Isothermal Effects on the Self-consolidating Concrete Containing Metakaolin and Zeolite7
Comparison of Explicit Relations for Calculating Colebrook Friction Factor in Pipe Network Analysis Using h-based Methods7
Interaction Between the Notch and Mortar–Mortar Interface (with Different Inclinations) in Semi-Circular Bend Specimens7
GIS-Based Landslide Susceptibility Mapping in Qazvin Province of Iran7
Adoption of BIM Concept in the Turkish AEC Industry7
Experimental Study of the Effect of Length and Angle of Cross-Cracks on Tensile Strength of Rock-Like Material7
Efficiency of Plasma Generation Optimization for Structural Damage Identification of Skeletal Structures Based on a Hybrid Cost Function7
Fresh Properties of Fiber Reinforced Cement-Based Foam with Pozzolans6
Influence of Sulfate Ions on Chloride Attack in Concrete Mortars Containing Silica Fume and Jajrood Trass6
Flood Mapping Using Multi-temporal Sentinel-1 SAR Images: A Case Study—Inaouene Watershed from Northeast of Morocco6
Close-range Blast Response Prediction of Hollow Circular Concrete Columns with Varied Hollowness Ratio, Arrangement of Compression Steel, and Confining Stirrups’ Spacing6
Effects of Concrete Strength and Openings in Infill Walls on Blasting Responses of RC Buildings Subjected to TNT Explosive6
The Impact of a Large amount of Ultra-fine Sunflower Ash With/without Polypropylene Fiber on the Characteristics of Sustainable Self-compacting Concrete6
Prediction of the Surrounding Rock Deformation Grade for a High-Speed Railway Tunnel Based on Rough Set Theory and a Cloud Model6
Performance of Precast Shear Wall Connections Under Monotonic and Cyclic Loading: A State-of-the-Art Review6
Near-Surface and Chloride Permeability of Concrete Using Pozzolanic Materials and Manufactured Sand as Partial Replacement of Fine Aggregate6
Structural Control Effect and Performance of Structure Under Control of Impulse Semi-active Mass Control Mechanism6
Modeling Pavement Condition Index Using Cascade Architecture: Classical and Neural Network Methods6
A Fuzzy Krill Herd Approach for Structural Health Monitoring of Bridges using Operational Modal Analysis6
Rheological Behavior of Polyphosphoric Acid-Vulcanized Liquid Rubber Compound Modified Asphalt Binder6
Thermal and Mechanical Characterization of Microencapsulated Phase Change Material in Cementitious Composites6
An Experimental Investigation into the Effect of Transverse Reinforcement Corrosion on Compressive Strength Reduction in Spirally Confined Concrete6
Experimental Investigation on Fatigue Characteristics of Asphalt Mixes with Different Automobile Waste Tyres as Modifiers6
Structural Reliability Assessment of Steel Four-Bolt Unstiffened Extended End-Plate Connections Using Monte Carlo Simulation and Artificial Neural Networks6
Excavation Face Stability of Shield Tunneling Closely Under Existing Tunnels: Particle Flow Simulation6
An Enhanced Symbiotic Organism Search Algorithm (ESOS) for the Sizing Design of Pin Connected Structures5
Study of the Arching Ratio in Earth Dam by Comparing the Results of Monitoring with Numerical Analysis (Case Study: Marvak Dam)5
Durability and Mechanical Properties of Pumice-based Geopolymers: A Sustainable Material for Future5
Development of Railway Turnout Structural Condition Index5
Optimization of Self-cured High-Strength Concrete by Experimental and Grey Taguchi Modelling5
Experimental Study on the Relationship Between Grouting Pressure and Compressive Strength of Hardened Cement Paste5
Mechanical Properties of Self-Compacting Rubberised Concrete (SCRC) Containing Polyethylene Terephthalate (PET) Fibres5
Multi-objective Billiards-Inspired Optimization Algorithm for Construction Management Problems5
Sanitary Landfill Site Selection Using Spatial-AHP for Pshdar Area, Sulaymaniyah, Kurdistan Region/Iraq5
The Boundary Element Method Applied to the Analysis of Euler–Bernoulli and Timoshenko Continuous Beams5
Seismological Aspects and Seismic Behavior of Buildings During the M 7.3 Western Iran Earthquake in Sarpol-e-zahab Region5
Phase Change Heat-induced Structure of Asphalt Pavement for Reducing the Pavement Temperature5
Design and Analysis of Lightweight Alkali-Activated Slag and Fly Ash Geopolymer Mortars using ANFIS-SSO5
Analytical Solution of Gradually Varied Flow Equation in Non-prismatic Channels5
Simulating Scale Dependencies on Dispersive Mass Transfer in Porous Media Under Various Boundary Conditions5
Experimental Investigation on the Strength, Durability and Corrosion Properties of Concrete by Partial Replacement of Cement with Nano-SiO2, Nano-CaCO3 and Nano-Ca(OH)25
Effect of the Shape and Position of the Bridge Pier on the Bed Changes in the Sharp 180-Degree Bend5
Effect of Fiber Parameters on the Strength Properties of Concrete Reinforced with PET Waste Fibers5
Investigating the Confining Effect of Steel Reinforced Polymer and Grout Composites on Compressive Behavior of Square Concrete Columns5
Elevated Temperature, Freezing–Thawing and Mechanical Properties of Limestone, Marble, and Basalt Powders Reinforced Metakaolin–Red Mud-Based Geopolymer Mortars5
Analyzing the Driving Factors of BIM Adoption Based on the Perception of the Practitioners in Indian Construction Projects5
Modelling the Injury Severity of Heavy Vehicle Crashes in Australia5
Analysis of the Mechanical and Thermal Buckling of Laminated Beams by New Refined Shear Deformation Theory5
Merge L-Moment Method, Regional Frequency Analysis and SDI for Monitoring and Zoning Map of Short-Term and Long-Term Hydrologic Droughts in the Khuzestan Province of Iran5
Experimental Study on Hardened Mechanical and Durability Properties of Industrial Ash Bricks5
Effect of Steel Fiber Additive on High Temperature Resistance in Geopolymer Mortars5
A DFN–DEM Approach to Study the Influence of Confinement on the REV Size of Fractured Rock Masses5
Study on Prediction Method of Infrasound Waves for Concrete Structure Destruction in Underground Space5
Use of Deep Liquid-Containing Tanks as Dynamic Vibration Absorbers for Lateral Vibration Control of Structures: A Review5
The Effect of Nano-Iron Oxide on the Strength and Consolidation Parameters of a Clay Soil: An Experimental Study5
Conductivity and Conductive Stability of Nickel-Plated Carbon-Fiber-Reinforced Cement Composites4
The Performance Analysis of Robust Local Mean Mode Decomposition Method for Forecasting of Hydrological Time Series4
PLS-SEM Approach for Predicting the Success of Public–Private Partnerships in Construction Projects: Indian Context4
Clay Nanosize Effects on the Rheological Behavior at Various Elevated Temperatures and Mechanical Properties of the Cement Paste: Experimental and Modeling4
An Anisotropic Critical State Plasticity Model with Stress Ratio-Dependent Fabric Tensor4
Synthesis of Slag-Ash-Phosphate Based Geopolymer Concrete in the Production of Sustainable Concrete Under Ambient Curing Conditions4
A Domain Decomposition Approach Using Equilibrated Basis Functions: Special Reference to Structural Engineering Problems with Varying Material Properties4
Considerations on Bearing Capacity Factors of Rough Strip Footing Using the Stress Characteristics Method4
Mechanical Analysis of Arch Support and Rock–Arch Interaction Considering Arch Failure Mechanism4
Cracking Analysis of Asphalt Mixture Using Semi-circle Bending Method4
Cyclic Behavior Assessment of Steel Bar Hysteretic Dampers Using Multiple Nonlinear Regression Approach4
Compressive Strength Estimation of Rice Husk Ash-Blended Concrete Using Deep Neural Network Regression with an Asymmetric Loss Function4
Experimental and Numerical Investigation of Uniaxial Compression Failure in Rock-Like Specimens with L-shaped Nonpersistent Cracks4
Critical Temperature Evaluation of Moment Frames by Means of Plastic Analysis Theory and Genetic Algorithm4
Selecting the Right Crops for Cropping Pattern Optimization Based on Social Choice and Fallback Bargaining Methods Considering Stakeholders’ Views4
Strength Properties of Geopolymer Concrete Modified with Recycled Aggregates4
Hydrological and Hydraulic Uncertainty Analysis in Probabilistic Design of Flood Diversion Systems Using NSGAII and Bivariate Frequency Analysis4
Forced Vibration Analysis of Isotropic Thin Circular Plate Resting on Nonlinear Viscoelastic Foundation4
A Practical Method for Rapid Assessment of Reliability in Deep Excavation Projects4
Empirical Models for Prediction of Frost Resistance of Normal- and High-Strength Concretes4
Identifying Effective Sustainable Development Indicators for Airport Construction Projects: Zahedan International Airport in Iran as Case Study4
Influence of Silica Fume Additive and Activator Ratio on Mechanical Properties in Slaked Lime-Based Alkali-Activated Mortars4
Dynamic Response of Buried Pipelines Retrofitted with Concrete Canvas Panels Under Blast Loading4
Studies on Greener Anticorrosive Coating to Steel Rebars with Waterborne Polyurethane Binders4
Analytical Approximate Solution for Large Post-Buckling Behavior of a Fixed-Pinned Beam Subjected to Terminal Force with Shear Force Effect4
Compared Environmental Impact Analysis of Alfa and Polypropylene Fibre-Reinforced Concrete4
Surrogate-Assisted Inverse Transient Analysis (SAITA) for Leakage Detection in Pressurized Piping Systems4
Experimental Study of High-Strength Bolt Connected Composite Beams with Web Openings4
Optimization of Egress in Fire Using Hybrid Graph Theory and Metaheuristic Algorithms4
The Effect of Fly Ash on the Bond Strength of Steel Reinforcement and Concrete4
Land Use-Land Cover Change and Its Relationships with the Groundwater Table and the Plants’ Altitudinal Zones: A Case Study of Arsanjan County, Iran4
Experimental Study of Wind Pressure on a Long-Span Canopy Roof Structure Using a Wind Tunnel4
Nitrate and Phosphate Removal Efficiency of Synechococcus elongatus Under Mixotrophic and Heterotrophic Conditions for Wastewater Treatment4
Probabilistic Prediction of Failure in Columns of a Steel Structure Under Progressive Collapse Using Response Surface and Artificial Neural Network Methods4
Plasma Generation Optimization for Optimal Design of Reinforced Concrete Cantilever Retaining Wall Structures4
Safety Evaluation of Anchoring-Grouting Rock-Support Interaction in Deep Underground Excavation Based on Support Vector Machine Learning4
A Laboratory Study on the Flexural and Shear Behavior of RC Beams Retrofitted with Steel Fiber-Reinforced Self-compacting Concrete Jacket4
Artificial Intelligence-based Compressive Strength Prediction of Medium to High Strength Concrete4
Properties of Mortars Formulated from Self-Compacting High-Performance Concrete Containing Various Mineral Additions4
Influence of Rheological Behavior of Mortar Matrix on Fresh Concrete Segregation and Bleeding4
Structural Performance of Steel-Tube Concrete Columns Confined with CFRPs: Numerical and Theoretical Study4
Spatio-temporal Variability of Discharge Over the Past 40 Years in Krishna and Koyna Rivers, India4
System Identification of a Soil Tunnel Based on a Hybrid Artificial Neural Network–Numerical Model Approach4
Analytical and Numerical Solutions to Level Pool Routing Equations for Simplified Shapes of Inflow Hydrographs4
The Effect of Central Flaw on the Unconfined Strength of Rock-like Specimens: An Intelligent Approach4
Limit Analysis of Lateral Earth Pressure on Geosynthetic-Reinforced Retaining Structures Subjected to Strip Footing Loading Using Finite Element and Second-Order Cone Programming4
Physico-Mechanical and Morphological Properties of Wax Latex-Modified Asphalt Binder4
An Investigation on the Settlement of Shallow Foundations Resting on Cross-Anisotropic Soil Deposits4
Mechanical Properties of Hybrid Self-Compacting Fibre-Reinforced Concrete (SCC-FRC) Containing PVA and PP Fibres3
Progressive Sidesway Collapse Analysis of Steel Moment-Resisting Frames Under Earthquake Excitations3
Impact Assessment of Physiography, Subsurface Hydraulic Gradients and Lithologic Heterogeneity on the Groundwater Quality3
Effect of Coarse Recycled Aggregate and Rice Husk Ash on Concrete: A Factorial Design Approach3
A Macro-method for Including Bond–Slip Flexibility Within Fibre Element Formulation for Simulating Hysteretic Behaviour of RC Beam–Column Members3
Numerical Study of Bed Topography Variations Owing to Placement of Triad Series of Vertical Bridge Piers Installed in a 180-degree Bend with Different Relative Radii Using SSIIM Numerical Model3
Impact of Fly Ash and Metakaoline on the Crack Resistance and Shrinkage of Concrete3
Investigation of Progressive Collapse Resistance Mechanism in Reinforced Concrete Beam–Column Assembly3
Internal and External Effects of Sodium Sulfate on the Strength of Soil Cement3
Predicting Performance Measurement of Residential Buildings Using Machine Intelligence Techniques (MLR, ANN and SVM)3
Structural Equation Modeling of Drivers’ Speeding Behavior in Lahore: Importance of Attitudes, Personality Traits, Behavioral Control, and Traffic Awareness3
High-Temperature Residual Compressive Strength in Concretes Bearing Construction and Demolition Waste (CDW): An Experimental Study3
Study on Wide-Deep Strip Foundations Resting on Unsaturated Soils3
The Biaxial Compressive Mechanical Properties and Strength Criterion of Recycled Aggregate Concrete Under Different Dynamic Strain Rates3
Post-yield Damping Ratio Estimation Studies for Masonry-Infilled Reinforced Concrete Frames3
Nonlinear Behaviour of Concrete Under Low-Velocity Impact by Using a Damaged Plasticity Model3
Improving the Performance of Precast Concrete Production Processes by Simultaneous Implementation of Lean Techniques and Root Cause Analysis3
Assessing the Effect of Building Information Modeling System (BIM) Capabilities on Lean Construction Performance in Construction Projects Using Hybrid Fuzzy Multi-criteria Decision-Making Methods3
Equivalent Linear and Nonlinear Site-Specific Ground Response Analysis of Pashto Cultural Museum Peshawar, Pakistan3
River Bed Sediment Management by the Winged Bandal-Like Structure and Selection of Optimum Structure Using Ranking of SAW and TOPSIS Methods3
Drought Monitoring in Bivariate Probabilistic Framework for the Maximization of Water Use Efficiency3
The Impact of Industry 4.0 Concepts and Technologies on Different Phases of Construction Project Lifecycle: A Literature Review3
Relative Performance of Limestone, Marble, and Basalt Powders in Replacement of a Recycled Fine Aggregate from Red Mud and Metakaolin-Based Geopolymer Mortar3
Influences of Aging on the Properties of SBS-Modified Asphalt Binder with Anti-Aging Agents3
An Experimental Analysis for Impact Behavior of Portland Cement Concrete Substituted with Reclaimed Asphalt Pavement Aggregate3
Schedule Risk Assessments Using a Precedence Network: An Object-Oriented Bayesian Approach3
Influence of Geotechnical Site Investigation in Horizontal Plane on Slope Reliability3
Modified Pseudo-dynamic Bearing Capacity of Strip Footing Resting on Layered Soil3
Experimental Investigations on the Mechanical Properties of Sand Stabilized With Colloidal Silica3
Influence of Climatic Variability on Detected Drought Spatio/Temporal Variability and Characteristics by SPI and RDI3
Behaviour and Strength Prediction of Reinforced Recycled Aggregate Concrete Columns Confined with CFRP Wraps3
Combined Effect of Layers Number and the Glass Fiber Type on the Shear Strength Characteristics of Chlef sandy soil3
Evaluating the Economic Feasibility of Designing Zero Carbon Envelope Buildings: A Case Study of a Commercial Building in Iran3
Predicting the Ultimate and Relative Bond Strength of Corroded Bars and Surrounding Concrete by Considering the Effect of Transverse Rebar Using Machine Learning3
Assessment of the Engineering Conditions of Small Dams Using the Analytical Hierarchy Process3
Scour at River Bend: A Parametric Study3
Comparison of Static and Dynamic Elastic Moduli in Concrete: Effects of Compressive Strength, Curing Conditions and Reinforcement3
Data-Driven Modeling of Flows of Antalya Basin and Reconstruction of Missing Data3
Optimal Design of MR Dampers by Considering Design Criteria and Dampers Distribution Effect3
Optimizing the Cargo Flows in Multi-modal Freight Transportation Network Under Disruptions3
Estimation of Methane Emission and Electricity Generation Potential from Mavallipura Landfill Site, India3
Multivariate Nonlinear Regression for Predicting Free Falling-Jet Scouring: An Experimental Study3
Influence of Lightweight Aggregates and Supplementary Cementitious Materials on the Properties of Lightweight Aggregate Concretes3
Fatigue Risk Management: Assessing and Ranking the Factors Affecting the Degree of Fatigue and Sleepiness of Heavy-Vehicle Drivers Using TOPSIS and Statistical Analyses3
Analysis of Driver and Vehicle Characteristics Involved in Red-Light Running Crashes: Isfahan, Iran3
Vibration-Based Damage Detection of Arch Dams Using Least-Square Support Vector Machines and Salp Swarm Algorithms3
Genetic Programming Approach for Estimating Energy Dissipation of Flow over Cascade Spillways3
Countermeasures Against Local Scouring Around Bridge Abutments: Combined System of Collar and Slot3
Age-Dependent Strength Assessment of Low Calcium Fly Ash Concrete Based on Ultrasonic Pulse Velocity and Rebound Hammer Number Measurement3
Empirical Relationships for Prediction of Mechanical Properties of High-Strength Concrete3
Damage Detection of a Scaled Steel Frame Offshore Structure Using an Improved Imperialist Competitive Algorithm3
Application of Developed New Artificial Intelligence Approaches in Civil Engineering for Ultimate Pile Bearing Capacity Prediction in Soil Based on Experimental Datasets3
Simulation of a Defect in a Concrete Dam Structure Using Steady-State Infrared Thermography3
Effects of Inherent Structural Characteristics on Seismic Performances of Aseismically Base-Isolated Buildings3
Stochastic Analysis of Rock Slope Stability: Application of Fuzzy Sets Theory3
Synthesis and Characterization of High-Performance Blended Alkali-Activated Geopolymer (FA/GBFS) from Industrial Wastes3
Effectiveness of Thermal Stimulation of Superplasticizers on Fresh Properties of Cement Mortar3
Lateral Stress Characteristics of Steel Structure Wall Module Exerted by Self-Compacting Concrete3
Effect of Metakaolin on the Durability Property of Superabsorbent Polymer Blended Self-Compacting Concrete3
Effect of Liquid Polyvinyl Acetate and Micronized Calcium Carbonate on Strength Parameters of Silty Sand Soil3
Investigating the Progressive Collapse of Steel Frames Considering Vehicle Impact Dynamics3
Study on Axial Compression Properties of Aluminum Foam-filled Steel Tube Members After High Temperature3
Investigating Application of Adaptive Neuro Fuzzy Inference Systems Method and Epanet Software for Modeling Green Space Water Distribution Network3
Point Versus Block Ordinary Kriging in Rain Gauge Network Design Using Artificial Bee Colony Optimization3
GIS and Gravity Model-Based Accessibility Measure for Delhi Metro3
The Assessment of Sustainability of Freight Transportation in Pakistan3
Effect of Stress Concentration Ratio on Shear Strength of Soft Soils Improved with Stone Columns3
Optimization in Process Parameters of Calcium Sulfate Whisker Modified Asphalt Using Response Surface Methodology3
Experimental and Numerical Investigation for Vertical Stress Increments of Model Piled Raft Foundation in Sandy Soil3
New Admixture for Foamed Warm Mix Asphalt: A Comparative Study3
Elevated Temperature Effects on Fly Ash-Based Geopolymer Composites Produced with Waste Granite Dust3
Efficient Models to Evaluate the Effect of Temperature on the Water Loss, Filter Cake, and Yield Stress of Polymerized Clay Bentonite Using in the Oil Well Drilling Operation3
Laboratory and Three-Dimensional Numerical Modeling of Laterally Loaded Pile Groups in Sandy Soils2
Effect of Polypropylene Fibers and Cement on the Strength Improvement of Subgrade Lying on Expansive Soil2
Toward Optimizing Dynamic Characteristics of Non-conventional TMDs in Multi-degree-of-Freedom Systems2
Studying the Effect of Fundamental Structural Period on the Seismic Fragility Curves of Two-Span Integral Concrete Box Girder Bridges2
Melody Search Algorithm Using Online Evolving Artificial Neural Network Coupled with Singular Spectrum Analysis for Multireservoir System Management2
Evaluating the Fragility Curve in Steel–Concrete Structure Undergoing Seismic Progressive Collapse by Finite Element Method2
Optimization of Construction Program Schedule Plans Based on Multi-Objective Optimization Theory2
The Use of Geotextile Tube to Control Shoreline Changes Under the Effect of Sea Level Rising2
Durability and Compression Properties of High-Strength Concrete Reinforced with Steel Fibre and Multi-walled Carbon Nanotube2
Power Spectral Density of Defect Beams Under a Moving Load2
Reutilization of Eggshell Powder for Improvement of Expansive Clayey Soil2
Influence of Earthquake Frequency Nonstationarity on Seismic Structural Response2
2-D Dam-Break Flow Modeling Based on Weighted Average Flux Method2
A Multi-Criteria Vulnerability of Urban Transportation Systems Analysis Against Earthquake Considering Topological and Geographical Method: A Case Study2
A Study of Local Soil Effect on the Earthquake Ground Motion in Bhaktapur City, Nepal Using Equivalent Linear and Non-linear Analysis2
Salt tracer experiment through an embankment dam2
Investigating the Effect of Confining Stress on the Crack Propagation Mechanism of Cubic Concrete Specimens Containing Central Cracks2
Numerical Investigation on the Behavior of Reinforced Lightweight Concrete Beams at Elevated Temperature2
Blast Resistance and Energy Absorption of Slotted I-core Steel Sandwich Panel: A Numerical Study2
Numerical Investigation of Reinforced Concrete and Steel Fiber-Reinforced Concrete Exterior Beam-Column Joints under Cyclic Loading2
Experimental and Analytical Study of Flexural Response of RC Beams with Steel Fibers After Elevated Temperature2
Factors and Interactions that Influence the Pressure Drop Across An Air Volume Reducing Device on Low-Pressure Water Distribution Networks2
Construction of Pretensioned Precast Concrete Pavement2
Effect of Stone Powder Content on Mechanical Properties of Manufactured Sand Concrete2
Compressive Strength of FRP-Reinforced and Confined Concrete Columns2
Developing a Model to Evaluate the Impact of Initiation Activities on Project Success in Iran by Considering Managing Stakeholder Engagement as a Moderator2
Analysis of the Effect of Kevlar Fibers on Abrasion Resistance, Flexural Strength and Hydraulic Conductivity Coefficient of Silica Fume Concretes2
Performance Evaluation of Cement Stabilized Mixture with Recycled Aggregate from Construction and Demolition Waste2
Studies on the Mechanical Properties of Dry, Saturated, and Frozen Marls Using Destructive and Non-destructive Laboratory Approaches2
Performance of a Time Integration Acceleration Technique Applied to Seismic Analysis of Non-classically Damped Structural Dynamics2
Numerical Simulation of the Interaction Between Normal Fault and Bedding Planes Using PFC2
Experimental Behavior of Cold-Formed Stainless Steel Screwed Beam–Column Connections at Post-Fire Condition2
Effect of Collars on the Downstream Movement of the Maximum Scour Depth Location Around Bridge Abutments and Piers2
Proposing Models for Estimating the Compressive Strength of HSC and UHSC FRP-Confined Circular Concrete by Using Whale Algorithm2
Experimental Study on Mechanical Strength of Vibro-Compacted Interlocking Concrete Blocks Using Image Processing and Microstructural Analysis2
Developing a Wearable Device Based on IoT to Monitor the Use of Personal Protective Equipment in Construction Projects2
Cable Tension Estimation for Suspen-Dome Structures Based on Numerical Method2
Formulating GA-SOM as a Multivariate Clustering Tool for Managing Heterogeneity of Aquifers in Prediction of Groundwater Level Fluctuation by SVM Model2
Uncertainty Analysis of Rainfall–Runoff Relationships Using Fuzzy Set Theory and Copula Functions2
Optimizing Operational Parameters of Electrokinetic Technique Assisted by a Permeable Reactive Barrier for Remediation of Nitrate-Contaminated Soil2
An Investigation of the Effect of Curing Temperature on the Deformation Characteristics of the Stabilized Soil Layers Treated with Lime and Tuff Wastes with Response Surface Method2
Production of Self-Compacting Concrete with Fly Ash Using Bagasse Ash as Fine Aggregate2
Damage Characteristics of Limestone under Freeze–Thaw Cycle for Tunnels in Seasonal Frozen Areas2
Prevention of Wind Erosion in Salty Lands of Urmia Lake with Butadiene Carboxylic Latex and Cement Grout2
Performance Assessment Framework and Deterioration Repairs Design for Highway Tunnel Using a Combined Weight-Fuzzy Theory: A Case Study2
Case Study of Flexible Prefabricated Impermeable Underground Support Structure2
Internal Curing of Concrete by Superabsorbent Polymer Particles2
Experimental and Numerical Investigation of Hybrid Fiber-Reinforced Concrete Beam2
Experimental Investigation of Arched Sharp-Crested Weir Flow and Comparing it with Rectangular Weir2
Numerical Study of Two-Dimensional Burger’s Equation: The Phenomenon of the Fall of Sediment Particles Using Incremental Differential Quadrature Method2
An Introduction to the Ancient Irrigation Structures Upon Karun River in Shushtar City, Iran2
Restoration of Urban Water Environment Landscape System and SWMM Technology Integration in Water-Scarce Cities2
Static and Dynamic Response of Rock Engineering Models2
Geo-Engineering and Microstructural Properties of Geopolymer Concrete and Motar: A Review2
Experimental Study on Single- and Multi-stage Pump as Turbine on Water Supply Pipelines2
An Overview of Optimal Damper Placement Methods in Structures2
Numerical Study on the Effect of Sediment Concentration on Jump Characteristics in Trapezoidal Channels2
Selecting the Appropriate Method for Resolving Construction Disputes in Iran2
Weighted Transmissibility-Based Operational Modal Analysis for Identification of Structures Using Seismic Responses2
Assessment of New Vector Intensity Measures for the Seismic Evaluation of Low-rise Frames by Considering Near-field Aftershock Effects2
Effect of Ferrochrome Slag Substitution on High Temperature Resistance and Setting Time of Alkali-Activated Slag Mortars2
Study on Antiknock Performance of Reinforced Concrete Slabs Using Piezoceramic Transducers2
Testing and Numerical Modeling of PVC-CFRP Confined Concrete Column-Reinforced Concrete Beam Joint under Axial Load2
Using the Response Surface Method to Optimize Weight Loss of Steel Bar in Concrete Exposed to Chloride2
Experimental Study on Shear Strengthening of Reinforced Concrete Box Beam by CFRP2
The Effect of Polypropylene and Steel Fibers on the Properties of Concrete at Normal and Elevated Temperatures—A Review2
Investigation on Self-Sensing Capability of Different Grades of Carbon Black in Cementitious Composites2
The Effect of Using Waste Tire as a Fine Aggregate on Mechanical Properties of Fly Ash-Substituted Self-Compacting Concrete2
Composite Failure Analysis of Municipal Solid Waste Landfill Cell Stability2
An Efficient Approach for Free Vibration Behaviour of Non-Uniform and Non-Homogeneous Helices2
Axial Compression Testing of Bamboo-Laminated Encased Steel Tube Composite Columns2
Evaluation Effects of Personality on the Young people Traffic Offense and Accident2
Impact of the nature of fibers on the physicomechanical behavior and durability of cement matrices2
A New Procedure for Determination of Lateral In-plane Failure Modes of Reinforced Concrete Squat Shear Walls2
A New Approach for Dust Storm Detection Using MODIS Data2
Discrete Optimization of Truss Structures Using Variable Neighborhood Search2
Evaluating the Effect of Heavy Vehicles on Traffic of Two-Way Two-Lane Road in Mountainous Area of Iran as a Developing Country2
Effect of Reduced Fineness of Fly Ash Used on the Alkali–Silica Reaction (ASR) of Concrete2
Effect of Reedy Emergent Side-Vegetation in Gravel-Bed Streams on Bed Shear Stress: Patch Scale Analysis2
Finite Element Analysis on Weak PVC-FRP Confined Concrete Column and Strong Joint Strengthened with Core CFST Under Axial Compression2
Field-Scale Improvement of Water Allocation for Maize Cultivation Using Grey Wolf Optimization Algorithm2
CFST Rib with Circumferential Gap and SWS Composite Defects2
Impact of Drying/Wetting on Shear Stiffness and Shear-Induced Volume Change Behaviours of Unsaturated Silty Clay2
Application of Artificial Neural Network in Predicting the Dispersibility of Soil2
A New Developed Line Sampling Method for Reliability-Based Design Optimization of Structures2
Structural Performance of Low-Calcium Fly Ash Geo-polymer Reinforced Concrete Beam2
Strengthening of Lap-Spliced RC Beams Using Near-Surface Mounting Method2
The Effect of Different Natural Porous Aggregates on Thermal Characteristic Feature in Cementitious Lightweight Mortars for Sustainable Buildings2
Improved MPS Gradient Models for Elasticity Problems2
Influence of Pumice and Metakaolin on Compressive Strength and Durability of Concrete in Acidic Media and on Chloride Resistance under Immersion and Tidal Conditions2
Metamodelling-Based Optimisation Approach for Wind Interference Effect on Octagonal Tall building2
Stability and Dynamics of a Slightly Curved Viscoelastic Pipe Resting on Linear and Nonlinear Viscoelastic Foundation2
Experimental and Numerical Investigation of the Flood Waves due to Partial Dam Break2
Optimum Design of Steel Frames Using Different Variants of Differential Evolution Algorithm2
Performance Enhancement of Fly Ash-Based Self Compacting Geopolymer Concrete Using Pre-heating Technique2
The Wall–Frame Interaction in Composite FRP-Steel Plate Shear Walls2
Analysis of PAT-Based Hydropower Plant Performance in Energy Harvesting: Application of Series Structure2
A Three-Variable Geometrically Nonlinear New First-Order Shear Deformation Theory for Isotropic Plates: Formulation and Buckling Analysis2
Urban Residential Buildings’ Energy Consumption Pattern and Efficiency2
Modeling the Response of a Piled-Raft Footing: Ultimate Bearing Capacity2
Effect of Weld Profiles on Fatigue Performance of Deck to U-Rib Weld in Orthotropic Steel Deck2
Effective Discharge and Scaling Laws for Suspended Sediment Transport in Godavari River Basin, India1
Experimental Study on Microstructural and Mechanical Behaviour of Self Compacting Concrete Using Agricultural Waste1
Evaluating Geometric Design Characteristics of Two-Lane Two-Way Rural Roads on Crash Frequencies Occurrences1
Effect of Using Eccentric Braces with Different Link Lengths on the Seismic Demand of CFST Column-Composite Beam Frames Subjected to Near-Field and Far-Field Earthquakes1
Effect of Curing on Failure Characteristics of Cold Mix Asphalt Containing Different Fillers1
Comprehensive Shear and Flexural Study: Experimental and FE Modeling of RC Haunched Beams Rehabilitated by Basalt Fabric1
Effect of Fiber Volume Fraction of Waste Originated Tire Fiber and w/c Ratio on Mechanical Properties of Functionally Graded Concrete1
Influence of Center-Hung Scoreboard on Seismic Response of Space Truss Structure under Vertical Earthquake1
Identification of Critical Barriers in Implementing Lean Construction Practices in Indian Construction Industry1
Diagnostic of Concrete Samples of Pile Caps Affected by Internal Swelling Reactions1
Numerical Study of Flow in Skewed Compound Channel Using k-ε Turbulence Model1
Mechanical and Durability Properties of Self Compacting Concrete Containing Treated Recycled Coarse Aggregates and Acetic Acid-Metakaolin Slurry1
Comparison of Four Chaotic Meta-Heuristic Algorithms for Optimal Design of Large-Scale Truss Structures1
Modeling Snowmelt Runoff Under CMIP5 Scenarios in the Beheshtabad Watershed1
Design of Dynamic Programming Model for Multi-Objective Cold Chain Logistics Deployment Path Based on Meme Algorithm1
Optimizing the Design Proportion of High-Performance Concrete via Using Response Surface Method1
Displacement of a Hydraulic Jump in a Rectangular Channel: Experimental Study1
Mechanical Performance of Geopolymer Concrete Based on Basalt and Marble Powder1
Effect of Ground Motion Scaling Methods on Seismic Response of Masonry Clock Towers1
Correction to: The Performance Analysis of Robust Local Mean Mode Decomposition Method for Forecasting of Hydrological Time Series1
Optimal Seismic Design of Asymmetrical-plan Steel Buildings with Composite Castellated Floor Systems1
Output-Only Method for Defect Identification in the Internal Edge of the Plates with a Circular Hole Using Guided Ultrasonic Waves and Discrete Wavelet Transform1
Long-Term Efficiency of Silica Fume in Terms of Sulfate Resistance of Concrete Immersed in Sulfate Solutions and Seawater1
A Simplified Model for Investigation on the Effects of Seismic Actions on Masonry Arch Bridges1
Application of Analytical Hierarchy Process for Flood Risk Analysis: A Case Study in Küçük Aksu River Basin (Antalya, Turkey)1
Understanding the Effect of Management Factors on Construction Workers’ Unsafe Behaviors Through Agent-Based Modeling1
Modeling Contaminant Transport in Fine Sands: Three-Dimensional Sandbox Experiments and Numerical Simulation1
Study of Microstructure of Concrete Pavement Exposed to Alternate Load and Temperature Effect1
An Investigation of the High-Temperature Behavior of Basalt, Olivine, and Pyrophyllite Additive Mortars1
Collapse Distribution Scenario in Seismic Progressive Collapse of RC Buildings Caused by Internal Column Elimination1
Experimental Study of Structural Strategy on Debris Brake Performance1
Kinematic Analysis and Rockfall Assessment of Rock Slope at the UNESCO World Heritage city (Safranbolu/Turkey)1
Study on Settlement Behaviour of Annular Raft Foundation using Finite Element–Boundary Element Method1
Automatic Landslide Segmentation Using a Combination of Grad-CAM Visualization and K-Means Clustering Techniques1
Study on the Corrosion Resistance of Hydrophobic Cement Mortar1
Support Pressure for Undrained Stability of Horseshoe-Shaped Twin Tunnels with Semi-Elliptical Roof in Clay1
Numerical Analysis of Bottle-Shaped Isolated Struts Concrete Deteriorated by Delayed Ettringite Formation1
Effects of Soil–Structure Interaction on Seismic Fragility of Railway Concrete Bridge, in India1
The Behaviour of the Different Types of Foam Concrete Load-Bearing Panels Utilising Palm Oil Fuel Ash as a Sand Replacement1
Local Buckling Analysis of Cold-Formed Steel Webs with Rectangular Openings1
Comparison of Metakaolin and Glass Powder as Supplementary Cementitious Materials (SCM) in Rubberized Concrete1
Seismic Vibration Control of Moment-Resistant Concrete Frames Using Nonlinear Viscous Dampers1
Evaluating the Engineering-Procurement-Construction Approach and Whole Process Engineering Consulting Mode in Construction Projects1
Properties of Slightly Alkali-Activated Electric Arc Furnace Slag Concretes and Statistical Evaluation1
Analysis of the Seismic Risk of Low-Code Masonry and Large Panels Structures in Romania1
Assessment of the Hydraulic Characteristics of Aggregate-Expanded Polystyrene Beads Composite Using Enhanced Standard Proctor Compaction Test Configuration1
Moisture Susceptibility, Deicing, and Self-Healing Characteristics of Sasobit-Modified Warm Mix Asphalt Containing Basic Oxygen Furnace Filler1
Recycled Concrete Aggregate Classification Based on Quality Parameters and Performance1
Stability Analysis of Flood Spreading Systems in Arid Regions, Iran1
Exploring the Student’s Perceptions on Safety Aspects of the University of Nizwa Bus Service in Oman1
The Effects of MTMD and HBI on the Performance of a Benchmark Building Against Near-Field Earthquakes Using Fuzzy Logic1
Applicability of Rainfall–Runoff Models in Two Simplified Watersheds1
Behavior of Nuclear Power Plant Containment under Aircraft Crash1
Effect of Natural Pozzolanic Additive on Strength and Durability of Concrete Immersed in Seawater1
Physical and Mechanical Properties of Concrete with Locally Produced Metakaolin and Micro-silica as Supplementary Cementitious Material1
Quantitative and Qualitative Optimization of Water Allocation in No Bandegan Aquifer using an Agent-based Approach1
Axiomatic Mix Proportioning for Self-Compacting Concrete with Silica Fume1
Traffic Impact Assessment for the Stadiums Hosting FIFA 2022 World Cup in Qatar: A Case Study1
Optimal Reservoir Operation Using New SChoA and ChoA-PSO Algorithms Based on the Entropy Weight and TOPSIS Methods1
Torsion Strengthening of RC Beams with External Lateral Pressure Using Steel Plates1
Experimental Work on Shear Strengthening of Beams Using Post-Tensioned Metal Straps Wrapped Around Steel Plates Anchored to Normal Steel-Reinforced Concrete Beams1
Identification of Structural Matrices of Shear Buildings Using Ambient Vibration Tests with Incomplete Measurements1
Shear Capacity of Lightweight Concrete Beam Reinforced with Glass Fiber-Reinforced Polymer Bars1
The Effect of Taguchi-Based Six Sigma Method on Variation Reduction in a Green Construction Material Production Process1
Parametric Study on Fatigue Failure Modes of the Rib-Deck Weld Under Out-of-Plane Bending Loading1
Performance Evaluation of Asphalt Concrete Mixtures Using Bagasse Ash as Filler1
Gas Molecules Dispersion (GMD) Optimization Algorithm and Its Application to Optimal Design of Steel Frames1
The Seismic Anisotropy of the Eastern Anatolia1
An Investigation of the Properties of 3D Textile-Reinforced Cementitious Composite Exposed to High Temperature1
Effects of Earthquake Components on Seismic Progressive Collapse Potential of Steel Frames1
Effects of Fiber Combination on the Fracture Resistance of Hybrid Reinforced Concrete1
Water–Cement Ratio on High-Cycle Fatigue in the Theory of Critical Distances of Plain Concrete1
Effect of Activator on Strength and Microstructure of Alkali Activated Concrete with Class C Fly Ash1
Experimental Investigation of Nanomaterial Regulating the Mechanical Properties of Grouting Concrete1
Effects of Cement and Nanoclay on the Characteristics of the Sand with Non-Plastic Fine Materials1
Study of the Concrete Lining Cracking Affected by Adjacent Tunnel and Oblique Bedded Rock Mass1
Analysis of Shear Wall Systems Using Plane Stress Elements1
Design Optimization of Soil-Metal Composite Arch Bridges: Recent Swarm Intelligence Applications1
Performance of Hybrid Fiber Reinforced ECC Containing Stone Industry Powder Waste1
Role of the Owner’s Representative Within the Construction Industry: Case Study of Chile1
Evaluation of Darcy–Weisbach Friction Factors of Fiberglass Pipes Based on Internal Surface Roughness Measurement1
Discrete Structural Optimization with Set-Theoretical Jaya Algorithm1
Experimental and Finite Element Analysis of Precast Reinforced Concrete U-Shaped Box Culvert1
Tests of Square Short RC Columns Confined with Steel Straps Under Monotonic Concentric Loading1
Water Allocation Based on Real-Time Simulation for Improving Soil Water Content1
The Efficiency of Hybrid Fibers (Steel and Carbon Fibers) in Controlling Micro Cracking of Concrete Beams1
Predicting Non-deposition Sediment Transport in Clean Pipes: Assessing Heuristic Models1
Behavior of Reinforced Concrete Frames Retrofitted by Different Configurations of Concentric Steel Braces1
Design Modification for Control of the "Hydraulique" Phenomenon Downstream of Low-Head Dam: Case Study—Salmon River Dam1
Design Optimization for Harnessing Low-Head Hydropower Potential Towards Socioeconomic Uplift1
Static Uplifting Analysis of Unanchored Ground-Based Cylindrical Steel Tanks1
Self-Organizing Optimization of Water Resources and Soil Moisture Content to Sustainable Agriculture1
Improvement of Dynamic Response of Structures on Sandy Soil by Means of Viscous Dampers1
Punching Shear Strength of Voided Slabs on the Elastic Bases1
Oxygenation by Plunging Jet Aerators: A Review1
Assessment of Seismic Resilience in Urban Water Distribution Network Considering Hydraulic Indices1
Experimental and Numerical Studies on Bearing Characteristics of Hexagonal-Section Composite Foundation Element1
Empirical Models for Hydrodynamic Pressure at Plunge Pool Bottoms Due to High-Velocity Jet Impact1
Control of River Bend Migration Using Permeable Rectangular Vane Made by Six-Pillar Concrete Elements1
In-depth Cyclic and Monotonic Assessment of Innovative Shear Resisting Frames with Haunched Beams (SRFHBs)1
Study on Modern Energy Absorption Systems in Structures Subjected to Earthquake Forces1
Effect of Municipal Solid Waste Incineration Fly Ash Leachate on the Hydraulic Performance of a Geosynthetic Clay Liner1
Seismic Analysis of Geogrid-Reinforced Soil Retaining Walls Under Decomposed Earthquake Records1
Monitoring of Corrosion Level in Nanocomposite Reinforced Concrete Specimens Using Zirconium Oxide Potential Sensor1
The Influence of α-Fe2O3 Nanoparticles on the Reinforced Concrete Beam–Column Joint Under Cyclic Loading1
The Determination of Convenient Junction Type Utilizing from Estimated Traffic Data with AHP Method1
Extreme Learning Machine for Estimation of the Engineering Properties of Self-Compacting Mortar with High-Volume Mineral Admixtures1
Deformation Characteristics of Ultra-Deep Foundation Pit in Yangtze River Floodplain with Multi-grade Dewatering1
Critical Depth of Trapezoidal Open Channel Using Explicit Formula and ANN Approach1
ANN-Based LUBE Model for Interval Prediction of Compressive Strength of Concrete1
Performance-Based Seismic Design Optimization of Steel MRFs Under System and Component Constraints Using the IWSA Algorithm1
Numerical and Experimental Assessment of Suspended Material Effects on Water Loss Reduction from Irrigation Channels1
Aseismic Structure Design of Non-heritage Museum Under the Concept of Green Ecology1
Structural Performance of Masonry Buildings Under Harsh Climate and Seismic Loads1
Dangerous and Aggressive Driving: Detecting the Interrelationship by Data Mining1
Experimental Investigation on Retrofitted RC Moment-Resisting Frames using NSD Yielding Dampers1
Effect of Surcharge Pressure on Model Geotextile Wrapped-Face Wall Under Seismic Condition1
A Numerical Investigation on the In-Plane Behavior of Perforated Unreinforced Masonry Walls1
Reliable Traffic Sensor Deployment Considering Disruptions Using Floating Search Method1
Estimation of the Most Influential Parameters Affecting the Rotary Braces Damper1
Effect of Mineral Additions and Metal Fibers on the Resistance of Cracking of the Dune Sand Concretes1
Analysis of Future Precipitation and Temperature Change and Its Implication on Doroodzan Dam, Iran1
Instability of Unsaturated Soils Under Constant Deviatoric Stress in Drained Conditions1
Nano-CaCO3 for Repair of Historic Joint Mortar1
Bottom ash as an Alternative Pozzolanic Material to Produce Eco-Friendly, High-Quality Chloride-Resistant Concrete1
Influence of Pre-Processing Algorithms on Surface Water TDS Estimation Using Artificial Intelligence Models: A Case Study of the Karoon River1
Validating Driving Simulator for Car-Following Distance1
Artificial Intelligence-Assisted Optimization of Tunnel Support Systems Based on the Multiple Three-Dimensional Finite Element Analyses Considering the Excavation Stages1
Simulation Study on the Influence of Bridge Pier Spacing on the Flow Pattern of the Lower Yellow River1
Experiment-Based CFD Simulation of Flow Pattern at Open-Channel Junctions1
Scours Evolution at Bridge Abutments Under Unsteady Flow Events1
Enhancing the Durability and Morphology Characteristic of Concrete Using Nano-Based GGBFS1
A Constitutive Model for Structured Loess Under High Stress Conditions1
Structural Damage Identification Using Frequency Domain Responses and a Differential Evolution Algorithm1
Seismic Performance of Three-core Buckling-Restrained Braces An Experimental Investigation1
Investigation of the Effect of Velocity on Secondary Currents in Semicircular Channels on Hydraulic Jump Parameters1