Journal of Advanced Ceramics

Papers
(The TQCC of Journal of Advanced Ceramics is 31. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Ultrasound-driven BaTiO 3 nanorobots patching immunologic barrier to cure chronic rheumatoid arthritis479
NUV-pumped luminescence of thermally stable samarium-activated alkali metal borophosphate phosphor269
High strength mullite-bond SiC porous ceramics fabricated by digital light processing267
Reduced He ion irradiation damage in ZrC-based high-entropy ceramics225
Hierarchical porous (Ta 0.2Nb 0.2Ti 0.2Zr 0.2Hf 0.2)C high-entropy ceramics prepared 218
Accuracy controlling and mechanical behaviors of precursor-derived ceramic SiOC microlattices by projection micro stereolithography (PμSL) 3D printing187
Synthesis and properties of MoAlB composites reinforced with SiC particles167
Low-permittivity LiLn(PO 3) 4 (Ln = La, Sm, Eu) dielectric ceramics for microwave/millimeter-wave communication162
Low concentration isopropanol gas sensing properties of Ag nanoparticles decorated In2O3 hollow spheres152
Simultaneously tuning structural defects and crystal phase in accordion-like Ti x O 2 x−1 149
Ultrahigh energy storage performance realized in AgNbO 3-based antiferroelectric materials via multiscale engineering148
Investigation on the arc erosion performance of Ag–Ta 2AlC composite under air conditions134
A facile strategy for large-scale production of 2D nanosheets exfoliated by three-roll milling134
Robust Joule-heating ceramic reactors for catalytic CO oxidation130
Phase transition of multi-component (TiZrVNb)C ceramics—Part I: Phase decomposition induced by carbon content124
Fabrication of advanced bioinspired anisotropic carbide ceramic composites: Past, recent progress, and future perspectives121
Improving ionic conductivity of von-Alpen-type NASICON ceramic electrolytes via magnesium doping121
Achieving durable double-layered thermal barrier coatings by tailoring multi-scale structures118
High toughness and CMAS resistance of REAlO 3/RE 2Zr 2O 7 (RE = La, Nd, Sm, Eu, Gd, and Dy) composites with 118
Reactive SPS of Al2O3–RE:YAG (RE = Ce; Ce+Gd) composite ceramic phosphors116
Layered metal carbo–selenide Nb 2CSe 2 with van der Waals interlayer coupling110
Synthesis of novel high-entropy diborides with high-efficiency electromagnetic wave absorption and excellent thermal stability110
Novel P2-type layered medium-entropy ceramics oxide as cathode material for sodium-ion batteries108
Microstructure, elastic/mechanical and thermal properties of CrTaO 4: A new thermal barrier material?107
Microstructural evolution and electromagnetic wave absorbing performance of single-source-precursor-synthesized SiCuCN-based ceramic nanocomposites107
Nb-doped PrBa 0.8Ca 0.2Co 2O 6-based perovskite cathode with improved oxygen reduction reaction activity and107
Structure, far-infrared spectroscopy, microwave dielectric properties, and improved low-temperature sintering characteristics of tri-rutile Mg 0.5Ti 0.5Ta105
An effective strategy for preparing transparent ceramics using nanorod powders based on pressure-assisted particle fracture and rearrangement102
Inactive Al3+-doped La(CoCrFeMnNiAlx)1/(5+x)O3 high-entropy perovskite oxides as high performance supercapacitor electrodes98
Sn-doped cobalt containing perovskite as the air electrode for highly active and durable reversible protonic ceramic electrochemical cells96
Regulation of the sintering trajectory of Ho,Pr:Y 2O 3 ceramics for 2.9 μm mid-infrared lasers by atmospheric sintering92
High transmittance and grain-orientated alumina ceramics fabricated by adding fine template particles92
Oxidation behaviors of carbon fiber reinforced multilayer SiC-Si3N4 matrix composites89
Realizing microwave-infrared compatible stealth via single 8YSZ coating88
Biphasic (Lu,Gd) 3Al 5O 12-based transparent nanoceramic color converters for high-power white LED/LD lighting87
Hollow engineering of HCNs@CoFe 2Se 4-QDs with quantum dots toward ultra-broadband electromagnetic wave absorption87
Ultrahigh energy density and efficiency BaTiO 3-based multilayer ceramic capacitors83
Thermal conductivity of boron carbide under fast neutron irradiation83
Effect of Y substitution on the microstructure, magneto-optical, and thermal properties of (Tb 1− x Y x 83
Stabilizing high-entropy MAX phases by incorporating tin81
Manipulating Nb-doped SrFeO 3− δ with excellent performance for proton-conducting solid oxide fuel cells79
In-situ synthesis of high-entropy Al 2O 3/RE 3Al 5O 12/ZrO 2<79
ZrB 2–SiC ceramics toughened with oriented paper-derived graphite for a sustainable approach79
Piezoelectric potential activated interfacial electric field in BiFeO 3@BaTiO 3 heterojunction for rapid and round-the-clock photocatalytic degradation of78
Honeycomb-like MXene/NiFeP x –NC with "continuous" single-crystal enabling high activity and robust durability in electrocatalytic oxygen evolu77
Insight into rare-earth-incorporated catalysts: The chance for a more efficient ammonia synthesis77
Realizing high thermoelectric performance of Cu and Ce co-doped p-type polycrystalline SnSe via inducing nanoprecipitation arrays74
Photovoltaic effects of Sm/Co-modified BNKT ferroelectric semiconductor ceramics under tunable multi-fields74
High-entropy enhanced room-temperature ferroelectricity in rare-earth orthoferrites73
Influence of high-temperature oxidation of SiC powders on curing properties of SiC slurry for digital light processing73
Preparation of SiC coated graphite composite powders by nitriding combustion synthesis72
Fabrication and high temperature electrical conductivity of polymer-derived SiHfBCN ceramic coating69
Synergistic improvement of the mechanical and biological performance of Si 3N 4 by incorporating nanostructured graphene69
Enhancement of densification and mechanical property of (Hf 0.2Zr 0.2Ti 0.2Nb 0.2Ta 0.268
Tunable polarization-drived superior energy storage performance in PbZrO 3 thin films68
Rare earth monosilicates as oxidation resistant interphase for SiCf/SiC CMC: Investigation of SiCf/Yb2SiO5 model composites66
High piezoelectricity after field cooling AC poling in temperature stable ternary single crystals manufactured by continuous-feeding Bridgman method65
Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography63
Effectively improved piezoelectricity in high-temperature Arrhenius CBT ceramics by modifying potential energy profile and spontaneous polarization63
Permeable carbon fiber based thermoelectric film with exceptional EMI shielding performance and sensor capabilities63
High-entropy perovskite RETa3O9 ceramics for high-temperature environmental/thermal barrier coatings61
New two-layer Ruddlesden—Popper cathode materials for protonic ceramics fuel cells61
Formation mechanisms of Ti 3(Si,Al)C 2/Al 2O 3 composites from Ti 3AlC 60
Achieving a large field-induced polarization and energy density in BaTiO 3 films sputter-deposited on Si at 200 °C via a buffer-layer technique58
High-entropy rare-earth diborodicarbide: A novel class of high-entropy (Y 0.25Yb 0.25Dy 0.25Er 0.25)B 58
New class of high-entropy pseudobrookite titanate with excellent thermal stability, low thermal expansion coefficient, and low thermal conductivity57
Rare-earth and transition metal ion single-/co-doped double-perovskite tantalate phosphors: Validation of suitability for versatile applications57
Highly selective photocatalytic CO 2 reduction to ethylene in pure water by Nb 2O 5 nanoparticles with enriched surface –OH groups 57
Mechanical property enhancements and amorphous thermal transports of ordered weberite-type RE3Nb/TaO7high-entropy oxides57
Fabrication of multi-anionic high-entropy carbonitride ultra-high-temperature ceramics by a green and low-cost process with excellent mechanical properties56
Emerging high-entropy strategy: A booster to the development of cathode materials for power batteries56
Patterned glass ceramic design for high-brightness high-color-quality laser-driven lightings56
Facile fabrication of cordierite-based porous ceramics with magnetic properties56
Highly enhanced thermoelectric and mechanical performance of copper sulfides via natural mineral in-situ phase separation55
Versatile BiFeO 3 shining in piezocatalysis: From materials engineering to diverse applications54
Modulation of spin dynamics in Ni/Pb(Mg1/3Nb2/3)O3-PbTiO3 multiferroic heterostructure54
A neutron diffraction investigation of high valent doped barium ferrite with wideband tunable microwave absorption54
Enhanced resistance to He ions irradiation damage of nanocrystalline SiC coating54
Temperature-dependent microstructural evolution in a compositionally complex solid electrolyte: The role of a grain boundary transition53
Electron-irradiation-facilitated production of chemically homogenized nanotwins in nanolaminated carbides53
HPMA modified aluminium nitride powder for aqueous tape casting of AlN ceramic substrates52
Functional ceramic support as an independent catalyst layer for direct liquid fuel solid oxide fuel cells51
Sintering behaviour and microwave dielectric properties of MgO-2B2O3-xwt%BaCu(B2O5)-ywt%H3BO3 ceramics51
Anisotropic, biomorphic cellular Si3N4 ceramics with directional well-aligned nanowhisker arrays based on wood-mimetic architectures51
Simultaneously enhanced energy storage performance and luminance resistance in (K 0.5Na 0.5)NbO 3-based ceramics via synergistic op50
Rapid fabrication of oxygen-deficient zirconia by flash sintering treatment50
Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air50
Rational design of PrBaFe 2O 6− δ -based cathodes for protonic ceramic fuel cells50
Density-functional-theory predictions of mechanical behaviour and thermal properties as well as experimental hardness of the Ga-bilayer Mo2Ga2C49
Formation of nanocrystalline graphite in polymer-derived SiCN by polymer infiltration and pyrolysis at a low temperature49
Construction of dual heterogeneous interface between zigzag-like Mo–MXene nanofibers and small CoNi@NC nanoparticles for electromagnetic wave absorption47
Coupling of piezocatalysis and photocatalysis for efficient degradation of methylene blue by Bi0.9Gd0.07La0.03FeO3 nanotubes47
Influence of nano-mechanical evolution of Ti 3AlC 2 ceramic on the arc erosion resistance of Ag-based composite electrical contact material46
3D-printed strontium-incorporated β-TCP bioceramic triply periodic minimal surface scaffolds with simultaneous high porosity, enhanced strength, and excellent bioactivity46
The role of γ-C 2H 5NO 2 as a new transient liquid phase in cold sintering process of BaTiO 3 composites46
Ultrahigh- Q Sr 1+ x Y 2O 4+ x 46
Microwave synthesis of duplex α/β-SiAlON ceramic cutting inserts: Modifying m, n, z values, synthesis temperature, and excess Y2O3 synthesis additive45
Ultrafast preparation of dense textured ZrB 2-based ceramics via heavy continuous DC Joule heating and pressing45
Photocurrent density and electrical properties of Bi0.5Na0.5TiO3-BaNi0.5Nb0.5O3 ceramics45
Cs3Bi2I9-hydroxyapatite composite waste forms for cesium and iodine immobilization45
Novel C sf/SiBCN composites prepared by densifying C sf/MA-SiBCN with the PIP process: Oxidation behavior and damage mechanism44
Electronic structure and enhanced photoelectrocatalytic performance of RuxZn1−xO/Ti electrodes44
Ce 3+:Lu 3Al 5O 12–Al 2O 3 optical nanoceramic scintillators e43
Manufacturing process of water-soluble salt-based ceramic cores based on vat photopolymerization43
Remarkably enhanced piezo-photocatalytic performance in BaTiO3/CuO heterostructures for organic pollutant degradation43
High-entropy perovskite oxides: An emergent type of photochromic oxides with fast response for handwriting display43
Regulating the composition, structure, and nanoscale dimensions of Yb 2Si 2O 7 environmental barrier coating to achieve a biomimeti43
Resistive switching and optical properties of strontium ferrate titanate thin film prepared via chemical solution deposition42
In situ formation of high-entropy carbide phase in porous SiBCN ceramic for enhanced high-temperature stability42
Low dielectric loss in vanadium-based zircon ceramics via high-entropy strategy42
Novel 3D grid porous Li4Ti5O12 thick electrodes fabricated by 3D printing for high performance lithium-ion batteries42
Erratum to: Fabrication of dense SiBCN monolith at a lower temperature and its high-temperature performance42
Advanced inorganic/polymer hybrid electrolytes for all-solid-state lithium batteries41
Enhanced piezo-catalysis in ZnO rods with built-in nanopores41
Lowering operating temperatures in high-power laser-excited LuAG:Ce films by improving crystallinity and increasing Ce 3+ content41
A creative method to tune Fe–O interaction in ferrites41
Resilient Si 3N 4@SiO 2 nanowire aerogels for high-temperature electromagnetic wave transparency and thermal insulation40
Abnormal thermal expansion coefficients in (Nd1−xDyx)2Zr2O7pyrochlore: The effect of low-lying optical phonons40
Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics40
Oxygen vacancy engineering on cerium oxide nanowires for room-temperature linalool detection in rice aging39
Enhanced giant dielectric properties and improved nonlinear electrical response in acceptor-donor (Al3+, Ta5+)-substituted CaCu3Ti4O12 ceramics39
Ultra-transparent β-Ga 2O 3:Cr 3+ glass-ceramics enabling high-efficiency true-transmission near-infrared light-emitting diodes39
In situ reduced MXene/AuNPs composite toward enhanced charging/discharging and specific capacitance38
Bioinspired PcBN/hBN fibrous monolithic ceramic: High-temperature crack resistance responses and self-lubricating performances37
High-entropy rare-earth zirconate ceramics with low thermal conductivity for advanced thermal-barrier coatings37
Dual-feedback healing mechanism redefining anti-oxidation coatings in fiber-reinforced composites37
Top priority current path between SiC particles during ultra-high temperature flash sintering: Presence of PyC “bridges”36
Simultaneous enhancement of piezoelectric performance and Curie temperature in high-temperature Bi 4Ti 3O 12 piezoceramics through 36
Boosting tribo-catalytic conversion of H 2O and CO 2 by Co 3O 4 nanoparticles through metallic coatings in r36
Fabrication of AlON transparent ceramics with Si 3N 4 sintering additive36
Microwave induced in-situ formation of SiC nanowires on SiCNO ceramic aerogels with excellent electromagnetic wave absorption performance36
Thermal conductivity and bending strength of SiC composites reinforced by pitch-based carbon fibers35
High speed laser cladding as a new approach to prepare ultra-high temperature ceramic coatings35
Heterogeneous layered structure in thermal barrier coatings by plasma spray-physical vapor deposition35
Optical, thermal, and mechanical properties of (Y1−xScx)2O3 transparent ceramics35
Achieving enhanced energy storage performance and ultra-fast discharge time in tungsten–bronze ceramic35
Influence of order-disorder transition on the mechanical and thermophysical properties of A2B2O7 high-entropy ceramics34
Room temperature synthesis of V-doped MIL-100(Fe) bimetallic MOF with superior antibiotics removal performance through the synergistic effect from photocatalysis and Fenton reaction34
Single-source precursor derived high-entropy metal–carbide nanowires: Microstructure and growth evolution34
Composition-dependent structural characteristics and mechanical properties of amorphous SiBCN ceramics by ab-initio calculations34
Pomegranate-type Si/C anode with SiC taped, well-dispersed tiny Si particles for lithium-ion batteries34
Microstructure evolution and growth mechanism of core-shell silicon-based nanowires by thermal evaporation of SiO34
Controllable synthesis of alumina nanofibers with tunable crystal phases via a facile and cost-effective dealloying process34
21-Component compositionally complex ceramics: Discovery of ultrahigh-entropy weberite and fergusonite phases and a pyrochlore-weberite transition33
Self-healing behavior of Ti2AlC at a low oxygen partial pressure33
Composition optimization, high-temperature stability, and thermal cycling performance of Sc-doped Gd2Zr2O7 thermal barrier coatings: Theoretical and experimental studies33
Synergetic effect of lattice distortion and oxygen vacancies on high-rate lithium-ion storage in high-entropy perovskite oxides32
Effects of (Mg1/3Sb2/3)4+ substitution on the structure and microwave dielectric properties of Ce2Zr3(MoO4)9 ceramics32
Fast grain growth phenomenon in high-entropy ceramics: A case study in rare-earth hexaaluminates32
Optimization of ferroelectricity and endurance of hafnium zirconium oxide thin films by controlling element inhomogeneity32
Optimization of microstructure design for enhanced sensing performance in flexible piezoresistive sensors32
Synthesis and mechanical and elevated temperature tribological properties of a novel high-entropy (TiVNbMoW)C 4.375 with carbon stoichiometry deviation32
Si-based polymer-derived ceramics for energy conversion and storage31
Composition and luminescence properties of highly robust green-emitting LuAG:Ce/Al 2O 3 composite phosphor ceramics for high-power solid-state lighting31
Synergistic promotion of dielectric and thermomechanical properties of porous Si 3N 4 ceramics by a dual-solvent template method31
Low sintering shrinkage porous ceramics: Principles, progress, and perspectives31
Synergistic effect of V2O5 and Bi2O3 on the grain boundary structure of high-frequency NiCuZn ferrite ceramics31
Progress in ceramic materials and structure design toward advanced thermal barrier coatings31
Capturing and visualizing the phase transition mediated thermal stress of thermal barrier coating materials via a cross-scale integrated computational approach31
Superior energy storage density and efficiency in antiferroelectric-like BNT-based ceramics via single-element phase engineering31
0.063423156738281