Journal of Advanced Ceramics

Article	Citations
Ultrahigh energy storage performance realized in AgNbO 3-based antiferroelectric materials via multiscale engineering	399
Hierarchical porous (Ta 0.2Nb 0.2Ti 0.2Zr 0.2Hf 0.2)C high-entropy ceramics prepared	246
Ultrasound-driven BaTiO 3 nanorobots patching immunologic barrier to cure chronic rheumatoid arthritis	169
Simultaneously tuning structural defects and crystal phase in accordion-like Ti x O 2 x−1	168
Reduced He ion irradiation damage in ZrC-based high-entropy ceramics	167
High-temperature structural evolution and mosaic-shell formation of sinoite fibers resistant to 1700 °C	154
Entropy enhancing toughness of diborides: First-principles insights and experimental validation	151
Low-permittivity LiLn(PO 3) 4 (Ln = La, Sm, Eu) dielectric ceramics for microwave/millimeter-wave communication	150
High strength mullite-bond SiC porous ceramics fabricated by digital light processing	132
Ultrasensitive low-temperature H 2 S detection enabled by microwave-synthesized CuO/SnO 2 /RGO com	125
Synergistically enhances piezoelectricity and resistivity of high-temperature 0.3Na 0.5 Bi 2.5 Nb	122
Interlayer bonding in vat photopolymerization additive manufactured ceramics with enhanced mechanical properties	120
Accuracy controlling and mechanical behaviors of precursor-derived ceramic SiOC microlattices by projection micro stereolithography (PμSL) 3D printing	119
Hierarchical interface-engineered magnetic graphene‒SiCN aerogels via a stepwise confinement strategy for low-frequency and broadband microwave absorption	116
Photoluminescence and optical temperature sensing properties of Gd 3Al 3Ga 2O 12:Pr 3+	111
A mortise–tenon joint inspired interface structure design for synergistically enhancing the mechanical properties and thermal shock resistance of Cf/(HfNbTaTiZr)C–SiC composites	100
Improving ionic conductivity of von-Alpen-type NASICON ceramic electrolytes via magnesium doping	92
Structure, far-infrared spectroscopy, microwave dielectric properties, and improved low-temperature sintering characteristics of tri-rutile Mg 0.5Ti 0.5Ta	91
Investigation on the arc erosion performance of Ag–Ta 2AlC composite under air conditions	90
Phase transition of multi-component (TiZrVNb)C ceramics—Part I: Phase decomposition induced by carbon content	90
Reactive-precursor-assisted low-temperature densification of high-entropy (TiVNbTaMo)C x ceramics	89
High toughness and CMAS resistance of REAlO 3/RE 2Zr 2O 7 (RE = La, Nd, Sm, Eu, Gd, and Dy) composites with	86
Reviving the activity of Si-contaminated cathodes via chloride anion doping for proton-conducting solid oxide fuel cells	86
Nb-doped PrBa 0.8Ca 0.2Co 2O 6-based perovskite cathode with improved oxygen reduction reaction activity and	85
Synthesis of novel high-entropy diborides with high-efficiency electromagnetic wave absorption and excellent thermal stability	84

Sn-doped cobalt containing perovskite as the air electrode for highly active and durable reversible protonic ceramic electrochemical cells	84
Microstructural evolution and electromagnetic wave absorbing performance of single-source-precursor-synthesized SiCuCN-based ceramic nanocomposites	84
Layered metal carbo–selenide Nb 2CSe 2 with van der Waals interlayer coupling	81
Microstructure, elastic/mechanical and thermal properties of CrTaO 4: A new thermal barrier material?	79
Fabrication of advanced bioinspired anisotropic carbide ceramic composites: Past, recent progress, and future perspectives	78
A scalable method allows for the rapid fabrication of C/SiC composites with excellent mechanical properties and ablation resistance	78
A facile strategy for large-scale production of 2D nanosheets exfoliated by three-roll milling	77
Reactive SPS of Al2O3–RE:YAG (RE = Ce; Ce+Gd) composite ceramic phosphors	77
An effective strategy for preparing transparent ceramics using nanorod powders based on pressure-assisted particle fracture and rearrangement	74
Liquid metal modified hexagonal boron nitride flakes for efficient electromagnetic wave absorption and thermal management	73
Achieving durable double-layered thermal barrier coatings by tailoring multi-scale structures	72
A reflective sapphire@PiGF@alumina color converter enabling ultrahigh luminescence laser-driven white lighting	70
Regulation of the sintering trajectory of Ho,Pr:Y 2O 3 ceramics for 2.9 μm mid-infrared lasers by atmospheric sintering	69
Biphasic (Lu,Gd) 3Al 5O 12-based transparent nanoceramic color converters for high-power white LED/LD lighting	68
Hollow engineering of HCNs@CoFe 2Se 4-QDs with quantum dots toward ultra-broadband electromagnetic wave absorption	68
Realizing microwave-infrared compatible stealth via single 8YSZ coating	67
Field-assisted sintering: Overview of thermo-electro-mechanical coupling effects	66
Insight into rare-earth-incorporated catalysts: The chance for a more efficient ammonia synthesis	66
In-situ synthesis of high-entropy Al 2O 3/RE 3Al 5O 12/ZrO 2<	66
Photovoltaic effects of Sm/Co-modified BNKT ferroelectric semiconductor ceramics under tunable multi-fields	66
Realizing high thermoelectric performance of Cu and Ce co-doped p-type polycrystalline SnSe via inducing nanoprecipitation arrays	65
Manipulating Nb-doped SrFeO 3− δ with excellent performance for proton-conducting solid oxide fuel cells	65
Stabilizing high-entropy MAX phases by incorporating tin	65
ZrB 2–SiC ceramics toughened with oriented paper-derived graphite for a sustainable approach	64
Piezoelectric potential activated interfacial electric field in BiFeO 3@BaTiO 3 heterojunction for rapid and round-the-clock photocatalytic degradation of	64
Ultrahigh energy density and efficiency BaTiO 3-based multilayer ceramic capacitors	63
Influence of high-temperature oxidation of SiC powders on curing properties of SiC slurry for digital light processing	63
Honeycomb-like MXene/NiFeP x –NC with "continuous" single-crystal enabling high activity and robust durability in electrocatalytic oxygen evolu	62
Effect of Y substitution on the microstructure, magneto-optical, and thermal properties of (Tb 1− x Y x	62
Tunable polarization-drived superior energy storage performance in PbZrO 3 thin films	61
Effectively improved piezoelectricity in high-temperature Arrhenius CBT ceramics by modifying potential energy profile and spontaneous polarization	60
Effect of current path on plasma assisted sintering (PAS) of 3YSZ ceramics	60
Preparation of SiC coated graphite composite powders by nitriding combustion synthesis	59
Synthesis, pyrolysis mechanism, and ceramic ablation performance of a TaC precursor with unsaturated bonds	59
Tailoring ablation resistance of (Hf,Zr,Ta)C coatings above 2000 °C: Critical role of Ta content	58
High-entropy enhanced room-temperature ferroelectricity in rare-earth orthoferrites	58
Achieving electrocatalytic activity toward oxygen reduction reaction based on Ruddlesden–Popper type cathode catalyst for solid oxide fuel cells	57
Temperature-modulated high-entropy perovskite cathodes with superior electrocatalytic activity for reversible solid oxide cells	57
Tribocatalytic activation of peroxymonosulfate by TiO 2 nanoparticles for powerful degradation of organic pollutants	57
Fabrication and high temperature electrical conductivity of polymer-derived SiHfBCN ceramic coating	56
First-principles calculations informing machine learning framework and visualization system for rapid and generalized gas response prediction in black phosphorus sensors	55
Synergistic improvement of the mechanical and biological performance of Si 3N 4 by incorporating nanostructured graphene	55
Low loss and temperature-stable Y 3MgAl 3GeO 12 microwave dielectric ceramics for X-band applications	54
Permeable carbon fiber based thermoelectric film with exceptional EMI shielding performance and sensor capabilities	54
Interface-engineering to boost the performance and durability of nickel-metal-supported reversible proton ceramic cells for power generation and hydrogen production	53
ZTA ceramics with optimized zirconia content for outstanding high-temperature mechanical properties	53
In-situ growth of MOFs on porous geopolymer spheres for continuous-flow PMS degradation of antibiotics	53
Ultra-fast synthesis and composition-dependent formation behavior of (Hf x Zr	53
Enhancement of densification and mechanical property of (Hf 0.2Zr 0.2Ti 0.2Nb 0.2Ta 0.2	53
Regulation of the temperature stability in ordered olivine microwave dielectric ceramics with low loss for dielectric resonant antenna	52

Highly selective photocatalytic CO 2 reduction to ethylene in pure water by Nb 2O 5 nanoparticles with enriched surface –OH groups	52
High-entropy diboride: A novel high-temperature self-lubricating ceramic with enhanced mechanical and tribological properties	52
New class of high-entropy pseudobrookite titanate with excellent thermal stability, low thermal expansion coefficient, and low thermal conductivity	51
Mechanical property enhancements and amorphous thermal transports of ordered weberite-type RE3Nb/TaO7high-entropy oxides	50
Rare-earth and transition metal ion single-/co-doped double-perovskite tantalate phosphors: Validation of suitability for versatile applications	50
Achieving a large field-induced polarization and energy density in BaTiO 3 films sputter-deposited on Si at 200 °C via a buffer-layer technique	49
Facile fabrication of cordierite-based porous ceramics with magnetic properties	48
The synthetic mechanism of LiCoO 2 from CoO and Li 2CO 3 under electric field	48
Boosting microwave attenuation in high-entropy carbide ceramics via magnetic Co incorporation and microstructural engineering	48
Exceptionally wear resistant (W 0.2Mo 0.2Ta 0.2Nb 0.2Ti 0.2)(C 0.75<	47
Fabrication of multi-anionic high-entropy carbonitride ultra-high-temperature ceramics by a green and low-cost process with excellent mechanical properties	47
Highly enhanced thermoelectric and mechanical performance of copper sulfides via natural mineral in-situ phase separation	47
Formation mechanisms of Ti 3(Si,Al)C 2/Al 2O 3 composites from Ti 3AlC	47
Emerging high-entropy strategy: A booster to the development of cathode materials for power batteries	46
High-entropy rare-earth diborodicarbide: A novel class of high-entropy (Y 0.25Yb 0.25Dy 0.25Er 0.25)B	46
Exceptional mechanical properties of (Ti 1− x Zr	45
Temperature-dependent microstructural evolution in a compositionally complex solid electrolyte: The role of a grain boundary transition	45
Sc 3+ -modified Mg–Al–Mn–Fe–O spinel ceramics with co-enhanced microwave dielectric and thermosensitive properties for multifunctional applications	45
Coupling of piezocatalysis and photocatalysis for efficient degradation of methylene blue by Bi0.9Gd0.07La0.03FeO3 nanotubes	45
Enhanced resistance to He ions irradiation damage of nanocrystalline SiC coating	45
Electron-irradiation-facilitated production of chemically homogenized nanotwins in nanolaminated carbides	45
Simultaneously enhanced energy storage performance and luminance resistance in (K 0.5Na 0.5)NbO 3-based ceramics via synergistic op	44
Construction of dual heterogeneous interface between zigzag-like Mo–MXene nanofibers and small CoNi@NC nanoparticles for electromagnetic wave absorption	44
Functional ceramic support as an independent catalyst layer for direct liquid fuel solid oxide fuel cells	44
3D-printed strontium-incorporated β-TCP bioceramic triply periodic minimal surface scaffolds with simultaneous high porosity, enhanced strength, and excellent bioactivity	43
Multi-element doped SrFeO 3 -based cathodes with balanced thermal expansion for proton-conducting solid oxide fuel cells	43
(Ti,Zr,Hf,Ta)CN/SiCN: A new ultrahigh-temperature ceramic nanocomposite with excellent mechanical properties and ablation resistance	43
Influence of nano-mechanical evolution of Ti 3AlC 2 ceramic on the arc erosion resistance of Ag-based composite electrical contact material	43
Rational design of PrBaFe 2O 6− δ -based cathodes for protonic ceramic fuel cells	43
HPMA modified aluminium nitride powder for aqueous tape casting of AlN ceramic substrates	43
Ce:GAGG and Al 2 O 3 −Ce:GAGG phosphor ceramics for laser-driven lighting: Effects of Ga	42
Achieving superior strength-toughness synergy in ZrC-based ceramics: An in situ multiscale construction strategy via a two-step reactive SPS process	42
Versatile BiFeO 3 shining in piezocatalysis: From materials engineering to diverse applications	42
Ce 3+:Lu 3Al 5O 12–Al 2O 3 optical nanoceramic scintillators e	42
Surface remelting strategy for enhancing forming quality in laser directed energy deposition of Al 2 O 3	42
Manufacturing process of water-soluble salt-based ceramic cores based on vat photopolymerization	42
Facilitating structural strengthening and electromagnetic wave absorption functionalization of dual-phase SiC ceramics via MBNS-dominated multiphase reinforcement strategy	42
High-sensitivity piezoelectric response enabled by heterogeneous stress–electric field distribution in 3D interconnected porous ceramics	42
Novel C sf/SiBCN composites prepared by densifying C sf/MA-SiBCN with the PIP process: Oxidation behavior and damage mechanism	42
Rapid fabrication of oxygen-deficient zirconia by flash sintering treatment	42
High-entropy perovskite oxides: An emergent type of photochromic oxides with fast response for handwriting display	41
Chemical composition regulation to enhance the energy storage property of the lead-free relaxor ferroelectric	41
The role of γ-C 2H 5NO 2 as a new transient liquid phase in cold sintering process of BaTiO 3 composites	41
Composite powder design strategy enabling vat photopolymerization 3D printing of lithium disilicate glass-ceramics with high precision, strength, and antibacterial properties	41
Ultrahigh- Q Sr 1+ x Y 2O 4+ x	40
Ultrafast preparation of dense textured ZrB 2-based ceramics via heavy continuous DC Joule heating and pressing	40
Bioinspired PcBN/hBN fibrous monolithic ceramic: High-temperature crack resistance responses and self-lubricating performances	39
A creative method to tune Fe–O interaction in ferrites	39
Dual-feedback healing mechanism redefining anti-oxidation coatings in fiber-reinforced composites	39
Abnormal thermal expansion coefficients in (Nd1−xDyx)2Zr2O7pyrochlore: The effect of low-lying optical phonons	39
Lowering operating temperatures in high-power laser-excited LuAG:Ce films by improving crystallinity and increasing Ce 3+ content	39
Low dielectric loss in vanadium-based zircon ceramics via high-entropy strategy	39
Regulating the composition, structure, and nanoscale dimensions of Yb 2Si 2O 7 environmental barrier coating to achieve a biomimeti	39
Resilient Si 3N 4@SiO 2 nanowire aerogels for high-temperature electromagnetic wave transparency and thermal insulation	38
Atomic-scale elucidation of attenuation mechanisms underlying exceptional electromagnetic wave absorption of SiZrBCN ceramic nanocomposites	38
Enhanced piezo-catalysis in ZnO rods with built-in nanopores	38
Erratum to: Fabrication of dense SiBCN monolith at a lower temperature and its high-temperature performance	37
Structural evolution and failure mechanisms of APS tantalate high-entropy ceramic coatings in response to thermal cycle up to 1500 °C	37
Oxygen vacancy engineering on cerium oxide nanowires for room-temperature linalool detection in rice aging	37
Ultra-transparent β-Ga 2O 3:Cr 3+ glass-ceramics enabling high-efficiency true-transmission near-infrared light-emitting diodes	37
First principles insights into solid solution mechanisms of doped Gd 2 Zr 2 O	37
Synthesis of high mechanical strength and excellent radiation resistance NaX zeolite microspheres via geopolymer in situ conversion and their adsorption study of	37
Fabrication, microstructure, and properties of 8 mol% yttria-stabilized zirconia (8YSZ) transparent ceramics	37
In situ formation of high-entropy carbide phase in porous SiBCN ceramic for enhanced high-temperature stability	37
Boosting tribo-catalytic conversion of H 2O and CO 2 by Co 3O 4 nanoparticles through metallic coatings in r	37
3D-printed polyurea-toughened Al 2O 3 cellular ceramic structures: Bioinspired dual-phase interpenetrating design for superior mechanical properties	37
Synthesis of ultralight hollow SiC/C nanofiber for highly efficient electromagnetic wave absorption	37
Achieving enhanced energy storage performance and ultra-fast discharge time in tungsten–bronze ceramic	37
Heterogeneous layered structure in thermal barrier coatings by plasma spray-physical vapor deposition	36
Fast grain growth phenomenon in high-entropy ceramics: A case study in rare-earth hexaaluminates	36
Mechanism of improved breakdown strength and energy storage performance in Cd-doped Sr 0.775 Bi 0.15	36
Self-healing behavior of Ti2AlC at a low oxygen partial pressure	36
Room-temperature synthesis of V-doped MIL-100(Fe) bimetallic MOF with superior antibiotics removal performance through the synergistic effect from photocatalysis and Fenton reaction	36
Multifunctional Bi 2 Se 3 ceramic nanosheets compatible variable capacitor and tunable EMI shieldi	36
Optimization of ferroelectricity and endurance of hafnium zirconium oxide thin films by controlling element inhomogeneity	35
Optimization of microstructure design for enhanced sensing performance in flexible piezoresistive sensors	35
Densification of water-insoluble Li 2TiO 3 nanoceramics via a cold sintering process using water as a transient liquid phase	35
Top priority current path between SiC particles during ultra-high temperature flash sintering: Presence of PyC “bridges”	35
Composition-dependent structural characteristics and mechanical properties of amorphous SiBCN ceramics by ab-initio calculations	35
Simultaneous enhancement of piezoelectric performance and Curie temperature in high-temperature Bi 4Ti 3O 12 piezoceramics through	35

High speed laser cladding as a new approach to prepare ultra-high temperature ceramic coatings	35
Influence of order-disorder transition on the mechanical and thermophysical properties of A2B2O7 high-entropy ceramics	35
Controllable synthesis of alumina nanofibers with tunable crystal phases via a facile and cost-effective dealloying process	34
Single-source precursor derived high-entropy metal–carbide nanowires: Microstructure and growth evolution	34
Construction of hydroxyapatite bioceramics with biomimetic structures by weak magnetic field-assisted 3D printing	34
Microstructure evolution and growth mechanism of core-shell silicon-based nanowires by thermal evaporation of SiO	34
A novel efficient preparation route for BN matrix composites reinforced with Al 2 O 3 fibers based	34
Synthesis and mechanical and elevated temperature tribological properties of a novel high-entropy (TiVNbMoW)C 4.375 with carbon stoichiometry deviation	34
Direct experimental validation on the crystal structure, chemical bonding, and magnetic properties of CrB 2	33
Synergetic effect of lattice distortion and oxygen vacancies on high-rate lithium-ion storage in high-entropy perovskite oxides	33
Composition and luminescence properties of highly robust green-emitting LuAG:Ce/Al 2O 3 composite phosphor ceramics for high-power solid-state lighting	33
Fast ion-conducting high-entropy garnet solid-state electrolytes with excellent air stability	33
Progress in ceramic materials and structure design toward advanced thermal barrier coatings	33
Graphene/SiC-coated textiles with excellent electromagnetic interference shielding, Joule heating, high-temperature resistance, and pressure-sensing performances	33
Low thermal conductivity and anisotropic thermal expansion of ferroelastic (Gd1−xYx)TaO4 ceramics	33
Fabrication of AlON transparent ceramics with Si 3N 4 sintering additive	33
Stabilization mechanism of antiferroelectric Pnma phase and low-field reversible phase transition in sodium niobate-based ceramics	32
Sintering densification driven by orientation fluctuation in textured BaTiO 3 ceramics with abnormal comprehensive ferroelectric properties	32
Restoring garnet oxide electrolytes via ultra-fast sintering	32
Hierarchical SiBCNFe composite ceramics enabling broadband electromagnetic wave absorption and corrosion resistance	32
High-performance Ta-doped Li7La3Zr2O12 garnet oxides with AlN additive	32
Bioinspired Bouligand structure for the synergistic enhancement of mechanical and thermal properties in 3D-printed C sf /ZrB	32
Boosting electromagnetic wave absorption of Ti 3AlC 2 by improving effective electrical conductivity	32
Enhanced ionic conductivity of Ce-doped Na 3Zr 2Si 2PO 12 electrolyte for achieving superior performance of	32
Synergistic promotion of dielectric and thermomechanical properties of porous Si 3N 4 ceramics by a dual-solvent template method	32
Low-temperature formation of eutectic structures by reactive flash sintering of Al 2 O 3 –Y	31
Low sintering shrinkage porous ceramics: Principles, progress, and perspectives	31
Capturing and visualizing the phase transition mediated thermal stress of thermal barrier coating materials via a cross-scale integrated computational approach	31
Environment-friendly Ca 2+/Cr 3+ co-doping LaAlO 3 ceramics with excellent infrared radiation performance for energy-saving	31
Microstructural tailoring, mechanical and thermal properties of SiC composites fabricated by selective laser sintering and reactive melt infiltration	31
Superior energy storage density and efficiency in antiferroelectric-like BNT-based ceramics via single-element phase engineering	31
Crystal structure, chemical bond characteristics, infrared reflection spectrum, and microwave dielectric properties of Nd 2(Zr 1− x	30
Isotropic hexagonal boron nitride ceramics with high thermal conductivity and strength	29
Temperature-modulated crystallographic orientation and electrical properties of BiFeO 3 thick films sputtered on LaNiO 3/Pt/Ti/SiO 2	29
Boosting bidirectional conversion of polysulfide driven by the built-in electric field of MoS 2/MoP Mott–Schottky heterostructures in lithium–sulfur batteries	29
Propulsion tests on ultra-high-temperature ceramic matrix composites for reusable rocket nozzles	29
Broadband orange-emitting Sr 3Si 8O 4N 10:Eu 2+ phosphor discovered by a modified sin	29
Enhancing microwave absorption performance of MoS 2 by synergistic effect of Fe doping	29
Microstructure and thermal properties of hafnium-doped high-entropy oxide (Y 0.25 Ho 0.25 Er	29
Distinguishing electrotensile strain and electrobending strain	29
Composite structure Al 2O 3/Al 2O 3–YAG:Ce/YAG ceramics with high color spatial uniformity for white laser l	29
Zn 0.5Co 0.5Mn 0.5Fe 0.5Al 0.5Mg 0.5O 4	29
Engineering design of feedstock powder and relevant thermal–mechanical performance of thermal/environmental barrier coatings	28
Superior energy storage performance in lead-free NaNbO 3 -based multilayer ceramic capacitors enabled by relaxor-to-superparaelectric crossover	28
Influence of average radii of RE3+ions on phase structures and thermal expansion coefficients of high-entropy pyrosilicates	28
The effect of nitrogen doping on the ablation resistance of zirconium carbide ceramics	28
Machine-learning-guided discovery of Ca 3 SnSi 2 O 9	28
Cold sintering process: A green route to fabricate thermoelectrics	28
BaTiO 3 -based multilayer ceramic capacitors with superior stability in energy-storage and pulse properties	28
Synergistic enhancement of crystallinity and transparency in Tb 3+-doped nano-glass-ceramics for high-resolution X-ray imaging	28
Nb- and Ta-doped (Hf,Zr,Ti)C multicomponent carbides with enhanced oxidation resistance at 2500 °C	28
Exploiting structural benefit of double phosphate for extremely efficient near-ultraviolet light towards multiple functionality	28
Design strategies for high entropy materials in water electrolysis: Enhancing activity, stability, and reaction kinetics	28
Well-designed g-C 3N 4 nanosheet incorporated Ag loaded Er 0.05La 0.95FeO 3 heterojun	27
Nd 3+:YAG–Al 2O 3 nanocrystalline transparent ceramics with high inflexion concentration quenching of Nd 3+	27
A review on magneto-optical ceramics for Faraday isolators	27
Thickness dependence of the crystallization and phase transition in ZrO 2 thin films	27
Interface-engineered decoupled conductivity and relaxation: Synergistic modulation of Debye-parameters in N-doped SiO 2 /MXene broadband wave-absorbi	27
In-situ synthesis of gadolinium niobate quasi-binary composites with balanced mechanical and thermal properties for thermal barrier coatings	27
Orbital hybridization and charge distribution modulation in MOF-derived carbon materials for tailored electromagnetic attenuation	27
Simultaneous achievement of large strain, low hysteresis, and high-temperature stability in textured BT-based piezoelectric ceramics	27
Micromechanical characterization of microwave dielectric ceramic BaO–Sm2O3–5TiO2by indentation and scratch methods	27
Optimizing magnetic and electrical properties of MnZn ferrites via spatially engineered Ni distribution	27
Photo-assisted charging of carbon fiber paper-supported CeO2/MnO2 heterojunction and its long-lasting capacitance enhancement in dark	26
Research progress and prospects of colored zirconia ceramics: A review	26
Multicomponent hexaborides with high infrared emissivity and low thermal conductivity for ultra-high temperature thermal protection applications	26
A highly sensitive multiple-mode optical thermometer designed in Eu 2+/3+ and Li + co-doped polymorphism compound LaSc 3(BO	26
Implanting Ag nanoparticles in SiOC ceramic nanospheres for exceptional electromagnetic wave absorption and antibacterial performance	26
High-performance (K,Na)NbO 3-based multilayer piezoelectric ceramic actuators with nickel inner electrodes	26
Exceptional thermal shock resistance of RSZ/YSZ coatings for rocket engines at 1800 °C	26
Flashing digital light processing based functionally graded additive manufacturing of zirconia dental crowns with simultaneous color and translucency gradation	26
In-situ preparation of robust self-lubricating composite coating from thermally sprayed ceramic template	25
Ultra-high-temperature application of MXene: Stabilization of 2D Ti 3C 2T x for cross-scale stre	25
Vacancy-mediated electromagnetic loss tuning in Cr-doped lanthanum manganite perovskites for broadband and high-intensity microwave absorption	25
Enhanced piezoelectricity in Na and Ce co-doped CaBi 4Ti 4O 15 ceramics for high-temperature applications	25
Deciphering the leakage conduction mechanism of BiFeO 3–BaTiO 3 lead-free piezoelectric ceramics	25
Zonal synergistic protection behavior of C f –HfC–HfB 2 –SiC composi	25
Tunnel-structured willemite Zn2SiO4: Electronic structure, elastic, and thermal properties	25
Etching-time-regulated strategy toward delaminated Mo 2CT x MXene for tailoring electromagnetic wave absorption	25
Synergistic enhancement of dielectric properties and reliability of BaTiO 3 -based MLCC via compositional gradient design and nano-domain engineering	25
Cold sintered BaTiO 3–poly(ether imide) nanocomposites with superior comprehensive performances	25
A novel Na 1− x K x TaO 3 perovskite microwave dielectric cerami	25
High-temperature BaTiO 3-based ceramic capacitors by entropy engineering design	25
Tunable polarization-drived high energy storage performances in flexible PbZrO 3 films by growing Al 2O 3 nanolayers	25
Defect regulation and photodarkening suppression in Yb:Y 2 O 3 laser ceramics through charge-compe	24
Sodium lithium niobate lead-free piezoceramics for high-power applications: Fundamental, progress, and perspective	24
Designing silver niobate-based relaxor antiferroelectrics for ultrahigh energy storage performance	24
High temperature piezoelectric properties and ultra-high temperature sensing properties of bismuth tungstate	24
Advances in SiC aerogel materials for thermal insulation and electromagnetic wave absorption	24
High hydrogen permeation resistance achieved in a novel (AlCrZr)O ternary oxide nanofilm	24
Li + and Nb 5+ co-doped BNT-based ceramic with ultrahigh electrostrain under a moderate electric f	24
K 0.5Na 0.5NbO 3-based multifunctional transparent ceramics for ultrahigh sensitive optical thermometry	24
A novel PiGF@ZS color converter with ZrO 2 microsphere-embedded reflector for high-brightness laser lighting	24
Unraveling the atomic-scale mechanisms of hydrogen defects behavior in yttria-stabilized tetragonal zirconia by first principles calculation	24
Li/Mn co-doped K 0.5 Bi 4.5 Ti 4 O	24