Engineering Science and Technology-An International Journal-Jestech

Article	Citations
Editorial Board	143
Application of grey-based fuzzy logic algorithm in MIG welding-A case study	106
Time response optimal rational approximation: Improvement of time responses of MSBL based approximate fractional order derivative operators by using gradient descent optimization	103
The effects of the cross-section shape of the surface-mounted cylinder on the free convective junction flow	85
Digital signatures over HMAC entangled chains	70
Study on thermal performance and simulation method of oil medium steel-BMC mechanical joints	62
Multibeam-based mmWave segmented beamforming array system for high efficiency and secure communication	52
Unloading sequence planning for autonomous robotic container-unloading system using A-star search algorithm	47
Study of the possibility of using phosphorous slags in road construction	42
06 February 2023 Kahramanmaraş earthquakes (Mw = 7.8 and 7.6) field observations and preliminary assessment report	42
Editorial Board	41
A dual-band microwave sensor for glucose measurements utilizing an enclosed split ring metamaterial-based array	40
Real time non-invasive monitoring of glucose and nitrogen sources with a novel window sliding based algorithm	39
A mathematical framework for link failure time estimation in MANETs	36
Passive flow control devices for road vehicles: A comprehensive review	36
Output current boosting in triboelectric nanogenerators for applications in self-powered energy systems	32
A design of higher-level control based genetic algorithms for wastewater treatment plants	32
An efficient design methodology to speed up the FPGA implementation of artificial neural networks	32
Gaussian bare-bones Levy circulatory system-based optimization for power flow in the presence of renewable units	32
Classification of numerical, experimental, and analytical approaches for gearbox oil flow and no-load gear power loss	31
Optimizing the thermophysical properties and combustion performance of biodiesel by graphite and reduced graphene oxide nanoparticle fuel additive	31
Vibration data-driven anomaly detection in UAVs: A deep learning approach	30
Editorial Board	30
Editorial Board	29
Finite element analysis for partly using MONEL 400 material in plastic injection tile spacer holder mold for ceramic tiles	28

Bending fatigue properties of structural steel fabricated through wire arc additive manufacturing (WAAM)	27
A novel lightweight model for tea disease classification based on feature reuse and channel focus attention mechanism	27
Experimental and FE studies on the bonding performance of basalt FRP bonded to notched concrete beams and improving with anchorage	27
Development of an analytical model to predict the churning power losses of an orthogonal face gear	26
Magnetic gearbox for automotive power transmissions: An innovative industrial technology	26
High-gain adaptive observer for floating voltages estimation and capacitor aging monitoring in multicell converters	26
Control strategies and experimental validation for high-gain non-isolated double inductor boost converter	25
Development of high-speed scanning acoustic microscopy system: Simplified design and stabilization	24
Controls on the geotechnical properties of plastic-bonded pavement blocks produced by artisanal means in Bamenda, Cameroon	24
Small-signal modeling and characteristic comparative analysis for a single grid-connected grid-forming VSG with full-order and second-order	23
A gripper for delicate edible manipulation	23
Low-profile dual-polarized differential-fed filtering antenna and its novel array with low sidelobe level	23
Eliminating surface cracks in metal film-polymer substrate for reliable flexible piezoelectric devices	23
Investigating the effects of Gaussian noise on epileptic seizure detection: The role of spectral flatness, bandwidth, and entropy	22
Editorial Board	22
Energy efficiency and transient-steady state performance comparison of a resistance infant incubator and an improved thermoelectric infant incubator	22
Methodology for determining the threshold distance for estimating the main EM exposure contribution in WLAN	21
Low-power and low glitch area current steering DAC	20
An obstacle-avoidance inverse kinematics method for robotic manipulator in overhead multi-line environment	20
A low-cost high-speed radix-4 Montgomery modular multiplier without carry-propagate format conversion	19
Perfomance of a borehole heat exchanger: The influence of thermal properties estimation under tidal fluctuation	19
Sizing of interoperable EV charging stations on highways with a coordinated charging scheduling strategy	19
EMTL-Net: Boosting segmentation quality in histopathology images of gland and nuclei by explainable multitask learning network as an optimized strategy	19
Effect of Co addition on microstructure and mechanical properties of new generation 3Cr-3W and 5Cr-3W steels	19
Full-duplex cooperative relaying with NOMA for the performance enhancement of underwater acoustic sensor networks	19
GIAE-Net: A gradient-intensity oriented model for multimodal lung tumor image fusion	18
Mechanical response and blast resistance evaluation of prefabricated frame tunnels with steel box joints under internal explosion	18
Hybrid photovoltaic and thermoelectric generator systems with thermal wheel Ventilation: A sustainable approach to residential heating and cooling	18
Revolutionary text clustering: Investigating transfer learning capacity of SBERT models through pooling techniques	17
BrainPixGAN: Generating intraoperative MRI images with mask-based generative networks	17
Fast traffic processing in multi-tenant 5G environments: A comparative performance evaluation of P4 and eBPF technologies	17
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	17
Innovative agricultural ontology construction using NLP methodologies and graph neural network	17
Environmental pollution cost analysis of a diesel engine fueled with biogas-diesel-tire pyrolytic oil blends	16
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	16
Design of an Omega Phi-shaped Tri band metamaterial absorber with sensing application	16
Efficiency analysis of solar farms by UAV-based thermal monitoring	16
Experimental analysis of phase shift modulation methods effects on EMI in dual active bridge DC-DC converter	16
Experimental optimization of displacer working gap in a gamma-type Stirling engine	15
Reduced specific absorption rate compact flexible monopole antenna system for smart wearable wireless communications	15
Corrigendum to “A prediction model for the performance of solar photovoltaic-thermoelectric systems utilizing various semiconductors via optimal surrogate machine learning methods” [Eng. Sci. Technol.	15
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	15
Dynamic popularity window and distance-based efficient caching for fast content delivery applications in CCN	15
Laser welding defects detection in lithium-ion battery poles	15
Editorial Board	15
Arabic sentiment analysis using GCL-based architectures and a customized regularization function	15
Sensorless direct torque control based on seven-level torque hysteresis controller for five-phase IPMSM using a sliding-mode observer	15
A Novel Adaptive Interpolation Approach for the Implementation of Operating-Speed-Dependent Motion Profiles in Processing Machines	14
Novel fuzzy 1PD-TI controller for AGC of interconnected electric power systems with renewable power generation and energy storage devices	14
Powder metallurgical fabrication of graphene reinforced near-eutectic Al-Si matrix composites: Microstructural, mechanical and electrochemical characterization	14

Age-gender specific prediction model for Parkinson’s severity assessment using gait biomarkers	14
The detection of unaccounted natural gas consumption: A neural networks and subscriber-based solution	14
Design and real-time implementation of a sliding mode observer utilizing voltage signal injection and PLL for sensorless control of IPMSMs	14
Nanofluids stability on amino-silane and polymers coating titanium dioxide and zinc oxide nanoparticles	13
Quantifying the impact of construction defects on square RC columns	13
An experimental study on the ballistic performance of ultra-high hardness armor steel (Armox 600T) against 7.62 mm × 51 M61 AP projectile in the multi-hit condition	13
Flow index-liquid limit relationship by fall-cone tests in clay-sand mixtures	13
Precise torque control for interior mounted permanent magnet synchronous motors with recursive least squares algorithm based parameter estimations	13
Full-state feedback LQR with integral gain for control of induction heating of steel billet	13
Ballistic performances of Ramor 500, Armox Advance and Hardox 450 steels under monolithic, double-layered, and perforated conditions	13
Secret data modification based image steganography technique using genetic algorithm having a flexible chromosome structure	13
Memory-driven deep-reinforcement learning for autonomous robot navigation in partially observable environments	13
Genetic based density peak possibilistic fuzzy c-means algorithms to cluster analysis- a case study on customer segmentation	13
Progressing of Kovacs model for conductivity of graphene-filled products by total contact resistance and actual filler amount	13
Cryptanalyzing a bit-level image encryption algorithm based on chaotic maps	13
Symbol error probability optimization in cognitive amplify and forward cooperative relaying networks	13
Highly sensitive miniaturized labyrinth shape circular split ring resonator (LC-SRR) based microwave sensor for low permittivity characterization applications	13
Artificial intelligence analysis of thermal energy for convectively heated ternary nanofluid flow in radiated channel considering viscous dissipations aspects	13
State-of-the-art review of contact and friction analysis with a spherical hinge and structural stability research on horizontal rotating bridges	12
Joint sensitivity analysis method of impeller aerodynamic performance to key geometric errors of five-axis machine tool	12
Design and real-time implementation of a robust fractional second-order sliding mode control for an electromechanical system comprising uncertainties and disturbances	12
Research on weakly conservative passive fault-tolerant control method considering the fault distribution	12
An efficient approach for no-reference image quality assessment based on statistical texture and structural features	12
Hybrid coati–grey wolf optimization with application to tuning linear quadratic regulator controller of active suspension systems	12
Long-term image-based vehicle localization improved with learnt semantic descriptors	12
Ciliary peristalsis flow of hydromagnetic Sutterby nanofluid through symmetric channel: Viscous dissipation in case of variable electrical conductivity	12
The influence of n-pentanol blending with gasoline on performance, combustion, and emission behaviors of an SI engine	12
Optimal location of accurate HVDC and energy storage devices in a deregulated AGC integrated with PWTS considering HPA-ISE as performance index	12
Editorial Board	12
Chemically reactive magnetized flow of viscoplastic nanofluid through a vertical cone considering non-Darcy porous media	12
Evaluation of a sustainable dye-exhausted resin regeneration method for cost-effective decolorization and detoxification of textile wastewater	12
Evolution of microstructure and mechanical properties of Co-SiC tungsten inert gas cladded coating on 304 stainless steel	11
Planning and protection of DC microgrid: A critical review on recent developments	11
A sustainable approach for the utilization of PPE biomedical waste in the construction sector	11
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	11
Influence of various fibers on the physico-mechanical properties of a sustainable geopolymer mortar-based on metakaolin and slag	11
Solar thermal waste heat energy recovery in solar distillation systems by using thermoelectric generators	11
Potential use of graphene oxide as an engine oil additive for energy savings in a diesel engine	11
Heuristic optimization based dynamic weighted state feedback approach for 2DOF PI-controller in automatic voltage regulator	11
Emotion recognition based on EEG feature maps through deep learning network	11
Non-linear site response and liquefaction analysis of soil site in Kahramanmaras during the Mw 7.7 and Mw 7.6 Turkey earthquakes	11
Influence of clay mineralogy on undrained cyclic strength of sand with fines	11
Editorial Board	10
Design and development of a lightweight, low-cost cylindrical electrostatic clutch	10
Enhancing performance of shipboard photovoltaic grid-connected inverter through CRNN-LM-BP control optimized by particle swarm optimization of LCL parameters	10
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	10
Evaluation of pull out behavior of plain and deformed steel bars in tire shred –sand mixture using large scale model	10
Design of lateral dynamic control objectives for multi-wheeled distributed drive electric vehicles	10
High-gain mmWave shorted rectangular ring antenna with complementary segmented-cavity backed structure	10
Grey Wolf Algorithm-Based source size and location determination method for capacity expansion planning in power systems	10
Natural and mixed convection in a vertical water-flow chamber in the presence of solar radiation	10
A hybrid CNN+LSTM-based intrusion detection system for industrial IoT networks	10
A hyper-heuristic based reinforcement-learning algorithm to train feedforward neural networks	10
Asymmetric coplanar strip based stepped monopole sensor for liquid permittivity measurements	10
Q-PIR: A quantile based Pareto iterative refinement approach for high-level synthesis	10
Experimental investigation of the performance and energy consumption efficiency of elliptical gear hydraulic pump and evaluation by Taguchi method	9
Circular-ring tied arc loaded excellent metamaterial absorber for EMI shielding of Wi-Fi signal and impurity sensing of cooking oil	9
Erosion development in AISI 316L stainless steel under pulsating water jet treatment	9
A novel optimal PIλDND2N2 controller using coyote optimization algorithm for an AVR system	9
Mechanical durability and degradation characteristics of long kenaf-reinforced PLA composites fabricated using an eco-friendly method	9
FABLDroid: Malware detection based on hybrid analysis with factor analysis and broad learning methods for android applications	9
Investigation of subcrestally placed dental implants with and without apical cortical bone anchorage under conventional or immediate loading	9
Visible and infrared image fusion using an efficient adaptive transition region extraction technique	9
Heat transfer characteristics of a periodically transient flow for turbulent wall-bounded dual jet	9
Retraction notice to “Multi-objective scheduling and optimization for smart energy systems with energy hubs and microgrids” [Eng. Sci. Technol. Int. J. 51 (2024) 101649]	9
Corrigendum to “A compact complementary split ring resonator (CSRR) based perfect metamaterial absorber for energy harvesting applications” [Eng. Sci. Technol. Int. J. 45 (2023) 101473]	9
Novel distance-fitness learning scheme for ameliorating metaheuristic optimization	9
Front Matter 1 - Full Title Page (regular issues)/Special Issue Title page (special issues)	9
Adaptive strategies and thermal perceptions in intermittently used congregational Spaces: A case study	8
RNE-DSNet: A Re-parameterization Neighborhood Enhancement-based Dual-Stream Network for CT image recognition	8
Assessment of sustainable expanded glass granules for enhancing shallow soil stabilization and dynamic behaviour of clay through resonant column tests	8
On the use of distributed hydrologic model for filling large gaps at different parts of the streamflow data	8
Effect of reverse-polarity hot wire on the tandem arc welding process	8
Exploring the tribo-mechanical performance of Ti-Mo-Zr-Ta-Sn alloys with a focus on their suitability for biomedical use	8
Hydrogen enrichment effects on performance and emission characteristics of a diesel engine operated with diesel-soybean biodiesel blends with nanoparticle addition	8
Electrochemical investigation of Pd-Au/BC nanocomposite-biochar and their photocatalytic and energy storage applications	8
Editorial Board	8
Optimization and mass transfer analysis under the ribs of multi-serpentine flow fields	8
Experimental determination of cooling performance on heat sinks with cone-jet electrospray mode	8
Enhancement in the electrical efficiency of a photovoltaic thermal system through ternary nanofluids application: Nanomaterial shape effects and phase change material encased in a rectangular block	8

Assessment of reinforced concrete building damages following the Kahramanmaraş earthquakes in Malatya, Turkey (February 6, 2023)	8
On the free vibration of a perforated Rayleigh beam with deformable ends	8
Mechanism of resistance to deformation for damaged mechanical elastic wheel: Rubber damage research based on peridynamic	8
Editorial Board	8
Machine learning-based approaches for handover decision of cellular-connected drones in future networks: A comprehensive review	8
Instantaneous contact area-based model for shear strength sensitive cutting coefficients characterization of anisotropic parts	8
The Effect of Conducted Emissions of Grid-Tied Three-Phase Adjustable Drives	8
An extensive analysis of power converter architectures for grid-connected solar photovoltaic driven electric vehicles (EVs)	8
Formulation of tunneling resistance between neighboring carbon nanotubes in polymer nanocomposites	7
Graph-based Turkish text normalization and its impact on noisy text processing	7
A new approach for measuring the wetting angles of lead-free solder alloys from digital images	7
Durability of preflex beam under cyclic loading	7
Modified particle swarm algorithm for scheduling agricultural products	7
Development of low-profile spectral signature chipless flexible RFID prototype for 5G supply chain IoT applications	7
Influence of palm oil fuel ash on the high strength and ultra-high performance concrete: A comprehensive review	7
Experimental analysis of a statistical multiploid genetic algorithm for dynamic environments	7
Experimental evaluation for potential drop in refrigerants under high-ambient conditions	7
Etching-free fabrication method for silver nanowires-based SERS sensors for enhanced molecule detection	7
Novel electric arc current emulation system for low-voltage grids	7
Mini/Micro UAV detection in the presence of ISM or spurious signals and an experimental application on an SDR	7
Weld joint characterization in ultrasonic welding of phosphor bronze sheets	7
Design of high uniform magnetic field with four coils based on improved wolf pack algorithm	7
RETRACTED: A prediction model for the performance of solar photovoltaic-thermoelectric systems utilizing various semiconductors via optimal surrogate machine learning methods	7
An effective analog circuit design of approximate fractional-order derivative models of M-SBL fitting method	6
Highly selective multiple-notched UWB-MIMO antenna with low correlation using an innovative parasitic decoupling structure	6
Investigation on the performance of reinforced concrete columns jacketed by conventional concrete and geopolymer concrete	6
Editorial Board	6
Significantly improved shear, dynamic-mechanical, and mode II fracture performance of seawater aged basalt/epoxy composites: The impact of halloysite nanotube reinforcement	6
An innovative data collection method to eliminate the preprocessing phase in web usage mining	6
Dielectrophoresis-based discrimination of hepatic carcinoma cells following treatment with cytotoxic agents	6
Deep reinforcement learning approach for multi-hop task offloading in vehicular edge computing	6
Differential evolution-based neural architecture search for brain vessel segmentation	6
Thermal spray copper-based coatings against contamination of thermoplastic surfaces: A systematic review	6
Designing a unified damping and cross-coupling rejection controller for LCL filtered PV-based islanded microgrids	6
Utilization of waste coal flotation concentrate for copper matte smelting	6
Assessment of innovative dented sheet liner on the improvement of hydraulic properties of pervious concrete pile	6
Development of an efficient design optimization strategy for thick-walled cylinders treated with combinations of autofrettage, shrink-fit and wire-winding processes	6
MHD nanofluid flow between porous convergent-divergent channel with velocity slip and nanoparticle aggregation	6
A novel model for higher performance object detection with deep channel attention super resolution	6
Effect of polarization potential on tribocorrosion behavior of duplex stainless steel UNS S32205 in NaCl solution	6
Nickel recovery in ferronickel concentrate by green selective reduction of nickel laterite	6
An advanced hybrid pre-filtering/in-loop-filtering based PLL under adverse grid conditions	6
A novel method for measuring inductances and analysis of shaded-pole motors	6
Marked social networks: A new model of social networks based on dynamic behaviors	6
IoT integrated adaptive fault tolerant control for induction motor based critical load applications	6