Additive Manufacturing

Article	Citations
Laser powder bed fusion vs. single track laser melting of martensitic Ti-Nb: Phase and microstructure formation	133
Multi-material additive manufacturing of self-heating structures for out-of-autoclave post-processing and de-icing	117
Enhancing equiaxed grain formation in a high-alloy tool steel using dual laser powder bed fusion	108
Refinement of Ti-6Al-4V prior-β grain structure in the as-deposited condition via process control during wire-direct energy deposition	76
Failure modes in dual layer thickness Laser Powder Bed Fusion components using a novel post-mortem reconstruction technique	76
Ultrasonically embedded wires in multi-material parts produced by hybrid additive manufacturing	73
Schwarzites and schwarzynes based load-bear resistant 3D printed hierarchical structures	72
Digital 3D defect maps: Detecting localised porosity with high-speed melt pool imaging data in LPBF	71
Local microstructure engineering of super duplex stainless steel via dual laser powder bed fusion – An analytical modeling and experimental approach	70
Stiffness and strength enhancement of triply periodic minimal surface-based shell lattices via a novel shape optimization framework	67
Physics-based crack formation model for René 80 in laser blown directed energy deposition: Theory and experiment	60
Effect of sintering aid combined vacuum infiltration on the properties of Al2O3-based ceramics via binder jetting	56
Preparation of a novel laser cladding Ni-based alloy with promising applications in high-temperature conditions: Genetic design, multi-phase evolution, and synergy mechanism	55
Exploration of electrohydrodynamic printing potentially for in-space fabrication of microscale functional structures: A preliminary study by an anti-gravity configuration	54
Probing melt pool dynamics in laser-directed energy deposition via optical metrology: Simultaneous mapping of 3D morphology and surface flow	50
Simulation-based process optimization of laser-based powder bed fusion by means of beam shaping	50
Implicit toolpath generation for functionally graded additive manufacturing via gradient-informed slicing	50
Understanding the mechanism of columnar–to-equiaxed transition and grain refinement in additively manufactured steel during laser powder bed fusion	49
In-situ visual monitoring for multi-scale defects detection in laser powder bed fusion	48
Rapid prediction of overload fatigue life based on phase-field modeling of microstructures under different scanning strategies	47
Direct ink writing of coaxial electrostatic fibers with customizable cross-sections and functional properties	47
Additive manufacturing and post-processing of superelastic NiTi micro struts as building blocks for cardiovascular stents	45
Volumetric 3D printing of ionic conductive elastomers for multifunctional flexible electronics	45
Magnetic polyamide 11 powder for the powder bed fusion process by liquid-liquid phase separation and crystallization	44
Unraveling jetting mechanisms in high-velocity impact of copper particles using molecular dynamics simulations	44

Impact of controlled prewetting on part formation in binder jet additive manufacturing	44
Subdivisional modelling method for matched metal additive manufacturing and its implementation on novel negative Poisson's ratio lattice structures	43
Vat photopolymerization 3D printing gyroid meta-structural SiOC ceramics achieving full absorption of X-band electromagnetic wave	42
Microstructures and precipitation behaviors of a hypoeutectic high-entropy alloy prepared by laser powder bed fusion	42
One-step preparation of melt-grown Al2O3/GdAlO3/ZrO2 eutectic ceramics with large size and irregular shape by directed energy deposition	42
AI for AM in zirconia ceramic vat photopolymerization: A machine learning approach to stabilising slurry suspension and maximizing dimensional accuracy of the 3D print process	41
Simultaneous topology and toolpath optimization for layer-free multi-axis additive manufacturing of 3D composite structures	40
Acoustic streaming-assisted two-photon polymerization process for the production of multimaterial microstructures	40
Achieving grain refinement and high superelastic strain during wire-arc directed energy deposition NiTi alloys by addition of La2O3	40
Probabilistic prediction of fatigue life scatter from surface and subsurface defect populations in additively manufactured metals	40
Rotational Co-extrusion 4D printing of heterogeneous filaments to enable sophisticated shape morphing	39
High throughput in-situ synthesis of Fe-Cr-Ni alloys via laser powder bed fusion: Exploring the microstructure and property evolution	39
Thermal-fluid behavior, microstructure and mechanical properties in liquid bridge transfer mode during directed energy deposition-arc additive manufacturing – Insights using NiTi as a model alloy	39
Impact of hydrogen bonding pendant groups in polymer grafted nanoparticles on interlayer adhesion and mechanical properties in material extrusion printing	38
Process optimization and characterization of dense pure copper parts produced by paste-based 3D micro-extrusion	38
High-cycle fatigue induced twinning in CoCrFeNi high-entropy alloy processed by laser powder bed fusion additive manufacturing	38
Influence of geometric defects on the compression behaviour of thin shell lattices fabricated by micro laser powder bed fusion	37
Direct-laser-writing of transparent silica and silica-titania glasses	36
High-content TiB2 reinforced Mg-Li matrix composite fabricated by directed energy deposition	36
In-situ microalloying of Al-Cu-Sc alloy manufactured by beam oscillating wire laser directed energy deposition: Grain refinement and properties improvement	36
Enhancing plasticity in laser additive manufactured high-entropy alloys: The combined effect of thermal cycle induced dissolution and twinning	36
Electrohydrodynamic jet printing of micro-structured electrode featuring 3D gold micropillar array for non-enzymatic detection of glucose	35
High-speed imaging investigation and process mapping of the plume behavior in laser powder bed fusion	35
Enhancing printing accuracy of arbitrarily non-linear fibers in melt electrowriting: Role of inertia and charge effect	35
Micro laser powder bed fusion of NiTi alloys with superior mechanical property and shape recovery function	34
Open-source thermo-mechanical modelling of WAAM 316 L stainless steel T-joints: Validation of hardness, distortion and residual stress	34
Cyclodextrins in 3D/4D printing for biomedical applications	33
Designing curing layer structures to manage the anisotropies of alumina ceramics manufactured by vat photopolymerization	33
Powder stream characteristics of replaceable alumina and brass nozzle tips for directed energy deposition	33
Characterizing the separation behavior of photocurable PDMS on a hydrogel film during vat photopolymerization: A benchmark study	33
Effect of non-reactive diluent on defect-free debinding process of 3D printed ceramics	33
Analysis and fast modelling of microstructures in duplex stainless steel formed by directed energy deposition additive manufacturing	33
Cross-scale mechanisms of anisotropy in 3D-printed Ultra-High-Performance Concrete (UHPC)	33
Impact of build process on microstructural evolution in laser directed energy deposition of Ti-8.5Cu Alloy: An in situ synchrotron X-ray imaging and post-build electron microscopy study	33
Topology optimisation for design and additive manufacturing of functionally graded lattice structures using derivative-aware machine learning algorithms	32
Understanding the solute segregation and redistribution behavior in rapidly solidified binary Ti-X alloys fabricated through non-equilibrium laser processing	32
Microstructure control in additively manufactured Ti-6Al-4V during high-power laser powder bed fusion	32
Deep learning based optical image super-resolution via generative diffusion models for layerwise in-situ LPBF monitoring	31
Interplay of process, microstructure, and mechanical performance in electron beam-powder bed fusion of Ti48Al2Nb2Cr	31
I-wi: Multifunctional 3D-printable stretchable ionogel and ionic eutectogel wires with AC and DC signal transmission	31
High-speed 3D printing of alloy architectures enabled by continuous liquid interface production	31
Effects of in-process surface finishing on part strength in polymer material extrusion additive manufacturing	31
Novel 3D thermal energy storage materials based on highly porous patterned printed clay supports infiltrated with molten nitrate salts	31
Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing	31
Eliminating structural defects in large area mechanical metamaterials via hot lithography in large-area projection micro-stereolithography	31
Direct Ink Writing of metakaolin-based geopolymers: Rheology and printability control using PEG and inorganic fillers	30
The effects of toolpath and glass fiber reinforcement on bond strength and dimensional accuracy in material extrusion of a hot melt adhesive	30
Powder bed fusion additive manufacturing of ultra-high molecular weight polyethylene using a novel laser scanning strategy	30
3D Printing of Damage‐tolerant Martian Regolith Simulant‐based Geopolymer Composites	30
Porous mullite ceramics with hierarchical pores constructed via vat photopolymerization of multi-phase Pickering emulsion	30

Flexible lattice structure using curved struts based on body-centered cubic structure	29
In situ laser profilometry for material segmentation and digital reconstruction of a multicomponent additively manufactured part	29
A multi-level capture algorithm for accelerating cellular automata predictions of grain structure and texture in additive manufacturing	29
Microstructure and texture control of Ni-Mn-Ga magnetic shape memory alloys manufactured by laser powder bed fusion	29
Optimization of polarization direction on 3D printed 3-3 piezoelectric composites for sensing application	29
Achieving high geometric fidelity in vat photopolymerization additive manufacturing through liquid surface support	28
Pressure drop non-linearities in material extrusion additive manufacturing: A novel approach for pressure monitoring and numerical modeling	28
Differentiable simulation for material thermal response design in additive manufacturing processes	28
Influence of filler concentration and type on rheological and mechanical properties of liquid isoprene rubber for high-strength parts via material extrusion	28
Extra-wide deposition in extrusion additive manufacturing: A new convention for improved interlayer mechanical performance	28
Material jetting high quality components via an inverse problem framework	27
In-situ selective laser heat treatment for microstructural control of additively manufactured Ti-6Al-4V	27
Isothermal crystallization behavior of poly-ether-ether-ketone/bioactive glass composites and its correlation with scaffold warpage in laser powder bed fusion process	27
Vacuum-assisted extrusion to reduce internal porosity in large-format additive manufacturing	27
Polycarbonate composites for material extrusion-based additive manufacturing of thermally conductive objects	27
Development and performance evaluation of galactomannan polymer based abrasive medium to finish atomic diffusion additively manufactured pure copper using abrasive flow finishing	27
Deformation and stress evolution during laser powder bed fusion of semi-crystalline polyamide-12	27
Graph-based spot melting sequence for electron beam powder bed fusion	27
On-the-fly 3D metrology of volumetric additive manufacturing	27
Printing force analysis in FDM-based 4D printing of singular lines: A numerical and experimental study	26
Evolution of microstructural heterogeneities in additively manufactured low-alloy steel	26
Binder jetting additive manufacturing of hierarchical structural SiCw/SiC composites	26
Influence of layer thickness on microstructure and dielectric properties of Mg2TiO4 microwave ceramics fabricated by vat photopolymerization	26
Synergistic enhancement of strength and ductility in Arc-DED Al-Cu alloys via in-situ liquid nitrogen cooling-induced grain structure heterogeneity and porosity suppression	25
In-situ observation of powder spreading in powder bed fusion metal additive manufacturing process using particle image velocimetry	25
Oscillating laser directed energy deposition for manufacturing high-performance titanium alloy	25
Scalable path level thermal history simulation of powder bed fusion process validated by melt pool images	25
Direct ink writing of magnetic soft materials with optimized printing path	25
Creep deformation and cavitation in an additively manufactured Al-8.6Cu-0.4Mn-0.9Zr (wt%) alloy	25
Tailoring phase transformation temperatures and functional properties through laser-based powder bed fusion: A pathway to functionally graded NiTi shape memory alloys	25
Powder-blown laser-based directed energy deposition of (14M) Ni-Mn-Ga magnetic shape memory alloy	25
Machine learning-based identification of interpretable process-structure linkages in metal additive manufacturing	25
Direct printing of conductive hydrogels using two-photon polymerization	25
Identifying fracture location in additively manufactured samples based on defect characteristics: Demonstration using AlSi10Mg	24
Microstructure characteristics of LPBF&HIP fabricated graded composite transition joint between ferritic steel and austenitic stainless steel	24
Acoustic-assisted 3D printing based on acoustofluidic microparticles patterning for conductive polymer composites fabrication	24
Wire-based directed energy deposition of NiTiTa shape memory alloys: Microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties	24
Excellent isotropic mechanical properties of directed energy deposited Mg-Gd-Y-Zr alloys via establishing homogeneous equiaxed grains embedded with dispersed nano-precipitation	24
Additive manufacturing of Diels-Alder self-healing polymers: Separate heating system to enhance mechanical, healing properties and assembly-free smart structures	24
Magneto-active composites with locally tailored stiffness produced by laser powder bed fusion	24
Detectability by X-ray micro computed tomography of fatigue initiating void defects in laser powder-bed additively manufactured Ti-6Al-4V coupons	24
Laser powder bed fusion in-situ alloying of refractory WTa alloy and its microstructure and mechanical properties	23
Long-term process stability in additive manufacturing	23
The effect of carbon fiber content on physico-mechanical properties of recycled poly(ethylene terephthalate) composites additively manufactured with fused filament fabrication	23
Vat photopolymerization based digital light processing 3D printing hydrogels in biomedical fields: Key parameters and perspective	23
Tailoring material microstructure and property in wire-laser directed energy deposition through a wiggle deposition strategy	23
In-situ thermal control-assisted laser directed energy deposition of curved-surface thin-walled parts	23
Temperature control in powder bed fusion of metals via inverse-designed laser beam shapes	23
Multi-metal additive manufacturing of selectively doped 316 L stainless steel-copper composite using hybrid laser powder bed fusion	23
In situ characterization of material extrusion printing by near-infrared spectroscopy	23
Realization of vat photopolymerisation of dense SiC ceramics with SiO2/MgSO4 coated sub-micron powders for efficient heat dissipation	23
Material jetting for advanced applications: A state-of-the-art review, gaps and future directions	23
Advanced measurement techniques for plastic shrinkage and cracking in 3D-printed concrete utilising distributed optical fiber sensor	23
A comprehensive study on the effects of surface post-processing on fatigue performance of additively manufactured AlSi10Mg: An augmented machine learning perspective on experimental observations	23
Effect of alternating interval of laser power on the element distribution, mechanical, and corrosion performance of electrochemical deposited multilayer Fe–Ni coatings	23
Revealing mechanisms underlying powder reusability of Ti-48Al-2Cr-2Nb intermetallic in electron beam powder bed fusion process	23
Dual-wavelength digital-light projection for precise spatial-temporal photochemical reaction-kinetics control	23
Functionally graded triply periodic minimal surface scaffold of HA-Al2O3 via Vat photopolymerization 3D printing	23
Boundary integrity-based Gyroid minimal surface NiTi porous structure achieved through non-proportionally scaled deformation method with superior mechanical property	23
Effect of aging temperature on microstructure evolution and strengthening behavior of L-PBF 18Ni(300) maraging steel	23
Complex architecture fabrication with photosensitive PEEK-based ink via vat photopolymerization and two-step thermal treatment	23
Adamantane-based low-dielectric-constant photocurable resin for 3D printing electronics	22
Photopolymerization 3D printing of luminescent ceramics	22
New insights into the mechanism of ultrasonic atomization for the production of metal powders in additive manufacturing	22
An airbrush 3D printer: Additive manufacturing of relaxor ferroelectric actuators	22
Comprehensive performance evaluation and prediction of additive manufactured cast iron/GH4169 bimetal based on forward design requirements	22
Integrated printing of high-strength, high-shape-retaining polyimide and its composite gradient structures for enhanced tribological properties	22
Robust optimization of 3D printing process parameters considering process stability and production efficiency	22
Uncovering grain and subgrain microstructure at the scale of additive manufacturing melt tracks with a scalable cellular automaton solidification model	22
In-situ synchrotron diffraction study on the anisotropic deformation and phase transformation behaviors in NiTi shape memory alloy fabricated by laser powder bed fusion	22
Fast and accurate auto-disturbances-rejection temperature control system based on particle swarm optimized fuzzy control: Applied for particle three-dimensional (3D) printing prosthetic orthotic plate	22
Influencing mechanisms of melt behavior on metal vapor characteristic and columnar grain formation in wire-arc directed energy deposition of titanium alloy	22
Substepped and advected subdomain methods for part-scale LPBF modeling	21
Additive manufacturing of carbon steel with site-specific compositions and properties using binder jetting and spark plasma sintering	21
High-resolution 3D printable inks based on functional polymeric ionic liquids for applications in carbon dioxide valorization	21
Ultraviolet-assisted material extrusion of silicones with largely enhanced mechanical properties and isotropy	21
Hot ceramic lithography of silica-based ceramic cores: The effect of process temperature on vat-photopolymierisation	21
3D printing of biodegradable polymer vascular stents to treat cardiovascular diseases: A review	21
Printing dense and low-resistance copper microstructures via highly directional laser-induced forward transfer	21
Effect of porosity distribution on the strength and strain-to-failure of Laser-Powder Bed Fusion printed Ti–6Al–4V	21

Towards standardizing the preparation of test specimens made with material extrusion: Review of current techniques for tensile testing	21
The DED-Arc number: A dimensionless correlation of wire arc additive manufacturing parameters to bead shape	21
Self-rotation-symmetry transformation for tuning anisotropy of single type lattice structures with minimal surfaces	21
A novel solid-state metal additive manufacturing process – Laser-induced Supersonic Impact Printing (LISIP): Exploration of process capability	21
Denoising diffusion probabilistic models for generative alloy design	21
Thermally assisted 3D printing of bio-polymer with high solute loading with improved mechanical properties	21
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure	21
Material extrusion additive manufacturing of recycled discontinuous carbon fibre reinforced thermoplastic composites with high fibre efficiency	20
Phase-assisted multi-material two-photon polymerization for extended refractive index range	20
Predictive process diagram for parameters selection in laser powder bed fusion to achieve high-density and low-cracking built parts	20
Mechanical properties of particle-bed 3D printed concrete infill patterns	20
An efficient ray tracing methodology for the numerical analysis of powder bed additive manufacturing processes	20
A design-to-manufacturing framework for graded woodpile structures via programmable dual-resolution material extrusion	20
STEAM: A scalable data-driven surrogate modeling framework for part-scale scanwise thermal process simulation of laser powder bed fusion	20
The effect of the laser beam intensity profile in laser-based directed energy deposition: A high-fidelity thermal-fluid modeling approach	20
A framework for forming thermoset polymer networks during laser powder bed fusion additive manufacturing	20
Effect of multiple thermal cycles on the microstructure evolution of GA151K alloy fabricated by laser-directed energy deposition	20
Superior mechanical properties of additively manufactured FV520B matrix composites by microstructure tailoring	20
Multiscale coupling analysis of energy absorption in 3D printed continuous fiber reinforced thermoplastic orthogonal fabric composites	20
Influence of thermal conductivity on the productivity of Al alloys designed for LB-PBF	20
Nano-scale microstructural evolution and mechanical property enhancement mechanism during crack inhibition in nickel-based superalloys fabricated by laser powder bed fusion	20
Process optimization for coaxial extrusion-based bioprinting: A comprehensive analysis of material behavior, structural precision, and cell viability	20
Effects of layer-by-layer ultrasonic impact treatment on microstructure and mechanical properties of 304 stainless steel manufactured by directed energy deposition	20
Realization and assessment of metal additive manufacturing and topology optimization for high-precision motion systems	20
Two-color thermal imaging of the melt pool in powder-blown laser-directed energy deposition	20
Simultaneous enhancement of mechanical and functional properties by heat-treatment in CuAlNi shape memory alloys fabricated by laser powder bed fusion	20
Effect of precipitation-forming elements in a near-eutectic Al-Ce alloy for Laser Powder Bed Fusion	20
Comparative evaluation of printability and compression properties of poly-ether-ether-ketone triply periodic minimal surface scaffolds fabricated by laser powder bed fusion	20
A literature review on powder spreading in additive manufacturing	20
Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters	20
Multi-length-scale study on the heat treatment response to supersaturated nickel-based superalloys: Precipitation reactions and incipient recrystallisation	19
A novel approach for powder bed-based additive manufacturing of compositionally graded composites	19
Mechanism of grain boundary angle on solidification cracking in directed energy deposition Hastelloy X superalloys	19
A novel approach for manufacturing cellular metallic structures using pulsed gas dynamic spraying process	19
Pulsed-switchable strategy and relative-pressure control optimizing multi-ceramics 3D printing integrated with laser-assisted curing	19
Design of elastically isotropic shell lattices from anisotropic constitutive materials for additive manufacturing	19
Localized strengthening of triply periodic minimal surface lattice structures via tuning the internal material distribution at the grain level	19
Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique	19
Machine-learning assisted optimization of process parameters for controlling the microstructure in a laser powder bed fused WC/Co cemented carbide	19
Deformation processes of additively manufactured interstitial-strengthened high entropy alloy: In-situ high-energy synchrotron X-ray diffraction and microstructural appraisal	19
UV-induced disulfide metathesis: Strengthening interlayer adhesion and rectifying warped 3D printed materials	19
Forward calculation model for utilization of energy and mass in laser-directed energy deposition	19
Prediction and homogenization of optical tomography images and microstructure during powder bed fusion of metals using a laser beam by means of a style-based generative adversarial network	19
Mechanism-driven process planning for continuous fiber-reinforced suspension lattice structures with complex path features via self-supporting suspension printing	19
Synergistic physics–data-driven cross-scale optimization of dielectric properties in multimaterial inkjet printing	19
Binder jetting printed metallic biomaterials	19
Effects of infiltration conditions on binder jet additively manufactured stainless steel infiltrated with bronze	19
Effect of dilution on fabricated functionally graded materials compositions: Modelling and mitigation strategies validated using the Ni-, Fe-, Cu- alloy system	19
Corrigendum to “Influence of process parameters on properties of Super Invar alloy fabricated by laser powder bed fusion for semiconductor equipment” [Addit. Manuf., 92, 25 July 2024, 104404]	19
Nanoscale engineering of low-misfit TiB2/Al3(Sc,Zr)/α-Al multi-interface to improve strength-ductility synergy for direct energy deposited aluminum alloy	19
Microcracking resistance of 3D printed fibre composites at cryogenic temperatures	19
Harnessing on-machine metrology data for prints with a surrogate model for laser powder directed energy deposition	19
Accelerating laser ray tracing in high fidelity physics simulations of laser melting using squeeze U-net	19
Asymmetric molten pool morphology in wire-arc directed energy deposition: Evolution mechanism and suppression strategy	18
Virtual volume correlation of lattice structures: From volumetric data to geometrical and dimensional defects identification	18
Using nonlinear lead filtering for real-time accurate extrusion control in large format additive manufacturing	18
Inhibition of interfacial cracks in 304L-Inconel718 bimetal fabricated via laser powder bed fusion	18
3D printing of mesoscopic porous anodes to enhance gas transport in solid oxide fuel cells	18
Design strategy for eliminating cracking and improving mechanical properties of Al-Mg-Si alloys fabricated by laser melting deposition	18
Evaluation of fracture properties of 3D printed high impact polystyrene according to essential work of fracture: Effect of raster angle	18
Sensory data mapping and database development for interlayer bond strength: Towards digital shadows in 3D concrete printing	18
Formulation of direct ink writing suspensions from coarse and reused B4C powders with ultra-high-temperature pressureless SPS	18
Design, fabrication, and characterization of tubular scaffolds by way of a melt electrowriting process	18
Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour	18
Strengthening and deformation mechanisms of laser additively manufactured Ni2CoCrNb0.2V0.2 medium-entropy alloy: Cryogenic to elevated temperatures	18
Achieving uniform plasticity in a high strength Al-Mn-Sc based alloy through laser-directed energy deposition	18
Assessment of the benefits of 3D printing of advanced thermosetting composites using process simulation and numerical optimisation	18
Continuous 3D printing of metal structures using ultrafast mask video projection initiated vat photopolymerization	18
Photocurable 3D printed anisotropic electrically conductive materials based on bio-renewable composites	18
Avoiding heat source calibration for finite element modeling of the laser powder bed fusion process	18
In-situ monitoring of Material Extrusion processes via thermal videoimaging with application to Big Area Additive Manufacturing (BAAM)	18
Laser-induced ultrasound-assisted LIBS for matrix-insensitive element quantification in metal additive manufacturing	17
Effect of impinging behavior annular jet shielding gas and printing substrate on metal droplet stable ejection	17
Adhesive and alloying properties of dual purpose polyfurfuryl alcohol binder for binder jet additive manufacturing of steel	17
Ti-6Al-4V hollow-strut lattice materials by laser powder bed fusion	17
Numerical and experimental analysis of powder bed homogeneity through multi-layer spreading in additive manufacturing	17
Unveiling the impact of short fibre reinforcement and extrusion properties on microstructure of 3D printed polycarbonate composites	17
Shear deformation behavior of additively manufactured 316L stainless steel lattice structures	17
Modeling of cell distribution dynamics in cell-laden bioink with active circulation	17
Predictive binder jet additive manufacturing enabled by clean burn-off binder design	17
Thermodynamic ripening induced multi-modal precipitation strengthened NiTi shape memory alloys by directed energy deposition	17
Precision flow rate control during micro-scale material extrusion by iterative learning of pressure-flow rate relationships	17
Influence of substrate microstructure on defect formation during Al alloy laser powder bed fusion	17
Accurate inverse process optimization framework in laser directed energy deposition	17
Microstructural screening of intermetallic alloys via an additively manufactured L12-Ni3(Al,Ti)/L12-Co3(Al,W) diffusion couple	17
Elevated temperature fretting wear study of additively manufactured inconel 625 superalloy	17
In situ synthesis of titanium alloy powders reinforced with nanoparticles for powder bed fusion: A step towards safer and more sustainable manufacturing	17
Ultrafast laser-assisted in-situ hybrid manufacturing: Mechanisms for tailoring processing quality, microstructure evolution and high performance of aluminum alloy	17
Deformations modelling of metal additively manufactured parts and improved comparison of in-process monitoring and post-process X-ray computed tomography	17
Unraveling microstructure and mechanical response of an additively manufactured refractory TiVHfNbMo high-entropy alloy	17
Bonding properties between 3D printed coarse aggregate concrete and rebar based on interface structural characteristics	17
In-situ crack and keyhole pore detection in laser directed energy deposition through acoustic signal and deep learning	17
In-situ monitoring of powder bed fusion of polymers using laser profilometry	17
Effects of size, geometry, and testing temperature on additively manufactured Ti-6Al-4V titanium alloy	17
Ultrasonic Impact Treatment (UIT) combined with powder bed fusion (PBF) process for precipitation hardened martensitic steels	17