Case Studies in Construction Materials

Article	Citations
Determination of the effectivity of composite members on structural behavior through different combinations	225
Fatigue life assessment of thermite welded rails based on laboratory tests and field measurement data	131
Experimental investigation on the residual strength of concrete under the multi-factor coupling action of chloride penetration, freeze-thaw, and fatigue effect	98
Study on the effect of recycled polyvinyl chloride powder on the properties of cementitious composite	79
Impact response of reinforced concrete beam with cushion using finite-element analysis	74
The long-term mechanical performance of geogrid-reinforced soil retaining walls under cyclic footing loading	67
Synergetic effect of viscosity modifying admixtures and polycarboxylate ether superplasticizer on key characteristics of thixotropic UHPC for bonded bridge deck overlay rehabilitation	66
Improvement of the thermal properties of alkali-activated fly ash after high temperature by the Fe-based solid wastes	64
Properties and stress-strain curve of rubberized concrete cast with uncoated or pre-coated rubber with cement/waste materials	62
Research on the dynamic characteristics of herringbone multi-ribbed reticulated shell concrete structures	62
Experimental study on stiffness deterioration of cracked RC hollow-core slab beams	61
Prevention of concrete breakout failure of expansion anchor in tension by post-installed reinforcement: Discrete analysis and experiment	61
Influences of short-term heavy rainfall on interlayer properties and microstructure of concrete dam	60
Feasibility of producing eco-friendly self-compacting mortar with municipal solid waste incineration bottom ash: A preliminary study	60
Probabilistic model for single and multiple action costs in maintaining both condition and safety of deteriorating reinforced concrete bridges	57
Structural and economic comparison of 4, 8 and 16-storey reinforced concrete frames with varying steel ratios	55
Investigating the impact of using modified cool materials by titanium dioxide (TiO2)-based photocatalytic self-cleaning nanoparticles in urban facades on urban microclimate parameters	55
A lateral pressure prediction model for bottom-up pumping of SCC in large-diameter steel tubes based on Bernoulli's Principle	55
Adhesion mechanism of warm-mixed recycled SBS Modified Asphalt Binder: Surface free energy, microstructure and chemical compositions	54
Seismic performance of energy dissipation low reinforced concrete shear wall with shear lead dampers	53
Energy absorption performance of steel plate-polyurethane foam composite protective structures	51
Finding optimized conditions for 3D printed high calcium fly ash based alkali-activated mortar	51
Predicting shear strength in UHPC beams through an innovative neural network with SHAP interpretation	50
Insights on the influence of nano-Titanium dioxide and nano-Zinc oxide on mechanical properties and inhibiting of steel reinforcement	49
Study on numerical seismic performance evaluation of 3D building frame with smart self-centering BRBs system	47

Vertical shear resistance of noncompact steel–concrete composite girders under combined positive moment and shear	47
Mechanical characteristics and structural performance of rubberized concrete: Experimental and analytical analysis	46
Performance characterization and combination design optimization of fast-melting SBS/CR modified asphalt	46
RETRACTED: Crashworthiness performance of filament wound GFRP composite pipes depending on winding angle and number of layers	45
Optimization design of ultrahigh-performance concrete based on interaction analysis of multiple factors	45
Experimental study on buildability of 3D-printed cement-based structures using aluminium sulphate	44
Investigation on the flexural-tensile properties of ultra-high-strength engineered geopolymer composites (UEGC) with varied waterglass modulus	44
Study on early microscopic characteristics and splitting ring-opening behavior of casing material for tunnel sleeve valve pipe grouting in water-rich environments	44
Influence of spatial fiber distribution parameters on mechanical properties of hybrid fiber reinforced self compacting concrete	43
Use of recycled plastic bottle caps (RPBC) as partial sand replacement in cement mortars: Mechanical and CO₂ emissions assessment	43
Physical-mechanical assessment of full-scale soil-cement column constructed in clayey soil	42
Compressive strength characteristics of polyurethane cemented sea sand	41
Preparation of tannic acid-based conversion coating and corrosion protection performances for steel in chlorinated simulated concrete pore solution	41
Corrigendum to “Full-scale test and numerical study on seismic performance of bridge piers with 650 MPa grade steel bars” [Case Stud. Constr. Mater., (2025) CSCM_e04969]	39
Prestressed CFRP–UHPC strengthening of RC square columns with joint enhancement: Failure mechanisms and seismic performance	39
Fatigue properties of polyurethane concrete expansion joint anchorage zone	39
Experimental study on the strength and durability-related properties of ordinary Portland and rapid hardening Portland cement mortar containing polyurethane binder	39
A comparative study of desiccation-induced shrinkage and cracking behavior of clayey soils from a cracked road	38
A crimp anchorage for CFRP strands: Conceptual design, performance evaluation, and engineering application	38
Visualization analysis of concrete crack detection in civil engineering infrastructure based on knowledge graph	38
Durability evaluation and life prediction of desert sand grouting material for semi - flexible pavements under sulfate dry - wet cycles based on entropy weight method and grey theory	38
Durable and sustainable warm mix asphalt pavement using value-added recycled PET	38
Influence of different aged and virgin asphalt fusion efficiency on fatigue performance, chemical structure and microscopic characteristics of recycled asphalt	38
Test and evaluation method of compressive strength of existing concrete structures	37
Research on the damage evolution law of iron tailing sand based foam concrete under cyclic loading	37
Constitutive model of waste brick concrete based on Weibull strength theory	37
Physicochemical evaluation of Eucalyptus Wood Ash as a mineral admixture in Portland cement matrices: A preliminary study	37
Experimental and simulation study of calcium carbonate non-uniform distribution characteristics of bio-cemented sand	36
A new uncertainty analysis method based on geostatistical simulation and a case study	35
Evaluation of degree of blending and interaction between aged and virgin asphalt binders using rheological and fracture measurements	35
Behavior factor estimation for seismic design of unreinforced masonry buildings	35
Influence of sand grain size distribution and supplementary cementitious materials on the compressive strength of ultrahigh-performance concrete	35
Three-dimensional finite element analysis for structural parameters of asphalt pavement: A combined laboratory and field accelerated testing approach	35
Damage assessment of precast reinforced concrete beam-column connections using AE technology	34
Performance based evaluation of chloride penetration resistance of high performance mortar with hollow microspheres developed for floating marine structures	34
Influence of pits characteristics on the failure mode of viaduct in service steel rebars	34
High temperature-resistance modification of the magnesium phosphate inorganic adhesive and its bond properties between CFRP sheets and concrete	34
Durability of prestressed high-strength concrete (PHC) piles in landfill leachate: Corrosion behavior, microstructural evolution, and structural integrity assessment	33
Deep learning-assisted thermal image analysis for assessment of cementitious composite flaws	33
Experimental study on the active repair and reinforcement of a shield tunnel lining with excessive transverse deformation	33
Supercritical carbonation of steel slag and its impact on cement hydration	33
Ultra-low cycle fatigue characterization and ductile fracture models of additive manufactured 316L stainless steels	33
Experimental investigation of the dynamic mechanical properties of concrete under different strain rates and cyclic loading	32
Electrochemical response and effect evaluation of high belite sulphoaluminate cement combined with red mud-fly ash on solidification of Cu2+-contaminated kaolin	32
Effects of incorporating spatial Z-shaped steel fibers on the performance of asphalt mixtures	32
Experimental Study into the Mechanical Properties of Plastic Concrete: Compressive Strength Development over Time, Tensile Strength and Elastic Modulus	32
Evaluating and selecting the best sustainable ‎concrete mixes based on recycled waste materials	32
Research on the influence of major ions in weakly alkaline mine water on anchor cable corrosion and protection technique	32
Prediction of permanent deformation of subgrade soils under F-T cycles using SABO-optimized CNN-BiLSTM network	31
Recycling potential evaluation of geopolymer concrete with different cementitious system used in freeze-thaw environment	31

Tuning interfacial properties of C-A-S-H gels through Al/Si ratio control: Multiscale simulation insights	31
Deposition morphology and mechanical properties of lean cemented gangue backfill material: Laboratory test and field application	30
Progressive damage of solid-waste coal-based geopolymer mortar based on acoustic emission: New indicators for precursor characterization of instability	30
Synergizing Portland Cement, high-volume fly ash and calcined calcium carbonate in producing self-compacting concrete: A comprehensive investigation of rheological, mechanical, and microstructural pro	30
Experimental study on hygrothermal deformation of foamed ceramic insulation decorative board under accelerated aging conditions	30
Feasibility analysis of the preparation of geopolymers from different types of coal based ash: Reaction, synthesis, and properties	30
Lap-slip model of rebar-to-concrete in RC/ECC/UHPC based on GA-BP neural network	30
Performance of geopolymer concrete activated by sodium silicate and silica fume activator	30
Rejuvenating evaluation of aged asphalt binder containing phosphogypsum through aromatic oil functionalized with waste PET derived additive: Insight into moisture-induced adhesion and cohesion	29
Performance degradation of styrene-butadiene-styrene modified asphalt binder at ultra-high temperature: Process of construction in fluid mastic asphalt	29
Innovative gel method: Sustainable crack healing in ceramic powder geopolymer mortars via marine actinomycetes and bioactivated carriers	28
Property and applicability of shield grouting material: State of the art and perspectives	28
Preparation and properties of nano-carbon black modified ultra-high-performance concrete	28
Evaluation of the bond-dependent factors for CFRP bars used as structural reinforcement: A critical review	28
Experimental investigation on gas permeability characteristics and durability aspects of concrete with construction joint	28
Classification and application of deep learning in construction engineering and management – A systematic literature review and future innovations	28
Experimental investigation on seismic performance of columns enhanced by high-strength steel bars and ultra-high-performance fiber reinforced concrete	28
Mechanical and microstructural characterization of one-part binder incorporated with alkali-thermal activated red mud	28
Automated detection of weld defects in TOFD images for steel bridges using generative adversarial networks	27
Influence of carbonized fly ash on the early-age shrinkage of blended cement paste with different water-to-binder ratios	27
Integrating machine learning with multi-objective optimization to maximize the ductility of macro-synthetic fiber reinforced rubber concrete	27
Properties of one-part geopolymer pedestrian blocks made using 100 % waste materials	27
A state-of-the-art review of research on the use of calcined bauxite aggregate in civil engineering	26
Analytical approach to estimating the influence of rock fragmentation on the clean concrete-rock shear behavior	26
Study on the effect of sintered secondary aluminum ash prepared pottery sand on the mechanical properties and ecological performance of high-strength cement-based materials	26
Conceptualization and performance evaluation of a super long span cable-stayed bridge with CFRP cables and CFRP–UHPC composite girders	26
Surface modified slag fiber reinforced asphalt mixture: Enhancement of pavement performance and field validation	26
Influence of load interval on dynamic properties of subgrade fill in cold regions	26
Waterproof performance and failure mechanism of GINA gasket subject to diverse joint deformations: A case study of the Yuliangzhou immersed tunnel	26
Enhancing the performance of bituminous hot mix pavements with graphene nanoplatelet additive using taguchi optimization	26
Development of boron carbide concrete for enhanced radiation shielding in nuclear reactors	26
Experimental study of thaw settlement and internal structural changes in frozen soil during the thawing process	26
Mechanical properties and compression damage characteristics of coal gangue-filled backfill cemented by fly ash modified self-consolidating grouts	25
Polyurethane-modified asphalt mechanism	25
Evaluation and prediction of fatigue life for ceramsite lightweight concrete considering the effects of ceramsite aggregate size and content	25
Effect of silica fume inclusion on the strength, shrinkage and durability characteristics of natural pozzolan-based cement concrete	25
Enzyme-induced calcium carbonate precipitation treated loess fly ash-based geopolymer for airport slope stabilization: Evaluation of wetting deformation and vibratory disintegration	25
Effect of orthotropy and printing patterns on the bending performance of 3D printed concrete grid components	25
Performance of steel metal prepared using different welding cooling methods	25
Reinforcing pore structure and ITZ of foam concrete enabled by DNA self-assembled CNTs networks	25
Durability assessment of GFRP bars in concrete exposed to field environment based on interlaminar shear strength	25
Pull-out bond efficiency and load capacity of the bonded HSC strips reinforced with steel and FRP bars to concrete	25
A novel disc bend test specimen for realistic measuring of tensile strength in pavements under transverse cracking condition	25
The behavior heated-damaged reinforced concrete beams retrofitted with different CFRP strip length and number of transverse groove	25
Hybrid data-driven approaches to predicting the compressive strength of ultra-high-performance concrete using SHAP and PDP analyses	24
Comparative study on the prediction of the unconfined compressive strength of the one-part geopolymer stabilized soil by using different hybrid machine learning models	24
Study on mechanical and electrical performance of highly dispersible electrostatic self-assembled nanocomposite concrete	24
Effect of foaming agent on the mechanical properties of red mud included controlled low-strength material CLSM	24
Microstructural characterization of alkali-activated concrete using waste-derived activators from industrial and agricultural sources: A review	24
Sustainable utilisation of low-grade and contaminated waste glass fines as a partial sand replacement in structural concrete	24
Engineering characteristics of ultra-high performance concrete containing basil plant ash	24
Palm oil fuel ash as a sustainable supplementary cementitious material for concrete: A state-of-the-art review	24
Enhancing lateritic soil for sustainable pavement subbase with polymer-modified cement: A comparative study of styrene butadiene rubber and styrene acrylic latex applications	24
Performance evaluation and durability assessment of bamboo fiber-reinforced stone mastic asphalt mixtures	24
Numerical approach to predict the flexural damage behavior of pervious concrete	24
Processing of polymer wood composite material from pine cone and the binder of phenol formaldehyde/PVAc/molasses and improvement of its properties	23
Investigation on improving the residual mechanical properties of reinforcement steel and bond strength of concrete exposed to elevated temperature	23
Durability of coral aggregate concrete under coupling action of sulfate, chloride and drying-wetting cycles	23
Mesoscale modelling of metaconcrete containing rubber aggregates towards wave attenuation against impact loadings	23
A memory-dependent three-dimensional creep model for concrete	23
A probabilistic interpretation of corrosion state through half-cell potential and electrical resistivity measures: The Flaminio Bridge in Rome	23
Corrosion fatigue life prediction model for 10CrNiCu shipbuilding steel under authentic marine environments	23
Assessment of equivalent substrate stiffness and mechanical properties of sustainable alkali-activated concrete containing recycled concrete aggregate	23
Alternative clay bricks inspired from termite mound biomimicry	23
Effects of sodium carbonate on self-healing properties of cement–slag–limestone powder ternary cementitious material	23
On determination protocols of characteristic in-situ compressive strength of concrete for existing structure: Case study with core samples from actual bridges	23
Study on influencing factors of synergistic deformation between built-in strain sensor and asphalt mixture	23
Study of viscoelastic damage and micromechanism of polyurethane in freeze-thaw cycle environment	23
Study on the anti-aging performance of O-Pal/SBS composite modified asphalt under multifactor coupling conditions	22
High-temperature performance of limestone-based masonry: Investigations at the material and assembly scales	22
Research on strength formation mechanism and noise reduction characteristics of waste rubber powder micro-surfacing	22
The effect of pore microstructure on strength and chloride ingress in blended cement based on low kaolin clay	22
Cellulose nanocrystals and their utilization in cement-based composites: A comprehensive review	22
Effect of reverse-osmosis brine and sodium aluminate on the hydration properties and strength of alkali-activated slag cement	22
Effect of sea salt coupled with reaction temperature on aqueous carbonation of recycled concrete powder: Insights into CO2 sequestration and CaCO3 polymorphism	22
Decreased useful life in air chamber reinforced concrete elements under sanitary floors by carbonation corrosion	22
Study on lateral grouting repair of shield tunnel deformation using bamboo fiber-polyurethane cementitious composites	22
Design and performance assessment of a novel self-anchored pedestrian suspension bridge	22
Experimental study on the drying shrinkage mitigation technique for cement-based materials in plateau: Low-heat cement and shrinkage-reducing admixture	22
Experimental characterisation of hygrothermal properties of a 3D printed cementitious mortar	22

Evaluation of common defects of grouted sleeve connectors	22
Retraction notice to “Alkali-Activated fly ash concrete with untreated coal aggregate: Fresh- and hardened state properties” Case Stud. Constr. Mater. 17(2022) 1141	21
Impact torsional behavior and strengthening of reinforced concrete spandrel beams	21
Transforming civil engineering: The role of nanotechnology and AI in advancing material durability and structural health monitoring	21
Environmental life cycle assessment of bridge deck pavement and case studies of two bridges in China	21
Study on expansion effect and hydration characteristics of ultra-high strength cement-based grouting materials based on humidity compensation	21
Machine learning-based prediction of crack width and bond-dependent coefficient (k) in GFRP-reinforced concrete beams	21
Sustainable development of basalt fiber-reinforced high-strength eco-friendly concrete with a modified composite binder	21
Improving composite cable performance: Nonlinear thermo-elastic analysis with temperature-dependent pretension and 3D cable elements	21
Investigation on fracture behavior of unidirectional bamboo laminate with self-tapping screws reinforcement	21
Experimental study on direct shear performance of prefabricated splicing joints of ultrahigh-performance concrete	21
An improved damage-plasticity material model for concrete subjected to dynamic loading	21
Investigation of the use of textile carbon yarns as sustainable shear reinforcement in concrete beams	21
Flexural behavior of rectangular hollow UHPC beams using glazed hollow beads	21
Quantitative characterization of aggregates and their chemical constituents in terms of acid and alkaline indicators	21
Flexural behavior of 15-year-old full-scale hollow slab beams strengthened with fiber-reinforced composites	21
Durability of marine concrete doped with nanoparticles under joint action of Cl- erosion and carbonation	21
Testing and modeling methods to experiment the flexural performance of cement mortar modified with eggshell powder	21
Experiment and particle flow simulation of unloading induced shearing properties for jointed sandstone materials	21
Research on maintenance equipment and maintenance technology of steel fiber modified asphalt pavement with microwave heating	21
Utilisation of Bayer red mud for high-performance geopolymer: Competitive roles of different activators	21
Compressive strength prediction of sustainable concrete incorporating rice husk ash (RHA) using hybrid machine learning algorithms and parametric analyses	20
Comparative studies on in-plane shear behavior of masonry wallettes retrofitted with mortar, UHPC, and ECC ferrocement: Shotcrete and prefabricated panels	20
A systematic review and assessment of concrete strength prediction models	20
Triaxial test and microstructure analysis of soil from alkali contaminated sites	20
Synergistic tensile response of reinforced ultra high performance concrete with low fiber contents	20
Application of titanium gypsum as raw materials in cement-based self-leveling mortars	20
Application of excavation compensation method for constructing shallowly-buried super-large span subway tunnel	20
New impulse-based test method for early-age elastic modulus measurement in cementitious materials	20
Influence of pre-drilling hole and feed rate on welded surface strength of pine-itauba joints	20
Controlled low strength materials (CLSM) activated with alkaline solution: Flowability, setting time and microstructural characteristics	20
The effect of permeable formwork on durability and corrosion performance of concrete	20
Repairing half-loaded flat slabs against punching shear using steel stiffeners	20
Ultrasonic-detected damage and bending behavior of reinforced PP-ECC beams after coupled action of freeze-thaw cycles and constant flexural load	20
Effect of component characteristics on mechanical properties of asphalt: A molecular dynamics study	19
Predictive strength model of cement-treated fine-grained soils using key parameters: Consideration of the total water/cement and soil/cement ratios	19
Ecofriendly panels for building with eucalyptus sawdust and vegetal polyurethane resin: A mechanical evaluation	19
Use of MICP with active bioslurry for restoration of fragmented ceramic artifacts: Mechanical and fracture behaviors study	19
Experimental study on the effect of nano SiO2 dispersion on the compressive strength and early high-temperature resistance of modified cement paste	19
Coupling effect of AO and HDI on the rheological behavior of rejuvenated SBS modified asphalts	19
Mechanical properties evolution of clays treated with rice husk ash subjected to freezing-thawing cycles	19
Deep learning techniques for multi-class classification of asphalt damage based on hamburg-wheel tracking test results	19
Shear behavior of transverse UHPC wet joint in prefabricated bridge deck with confining stress	19
Multi-method characterization of 50-year-old mass concrete from the nuclear power plant Unterweser in Germany: A forensic approach	19
Performance evaluation of cement modified asphalt rubber binder through optimizing aging indexes	19
The influence mechanism of radiation shielding functional ceramsite on the performance and microstructure of UHPC	19
The influence of the Functional Unit on the comparability of life cycle assessments in the construction sector: A Systematic Literature Review and attempt at unification for Reinforced Concrete	19
Analysis of wind-induced vibration effect parameters in flexible cable-supported photovoltaic systems: A case study on ground anchor with steel cables	19
Hybrid machine learning approach to prediction of the compressive and flexural strengths of UHPC and parametric analysis with shapley additive explanations	19
Analysis of the shear failure between track slab and CA mortar layer caused by thermal effect for ballastless track	19
Unraveling the structural deterioration of Isfahan's Sio-Se-Pol Historical Bridge: A finite element analysis approach	19
Field testing for structural behavior of a stratified monumental complex over time: Palazzo Colonna-Barberini and Templum Fortunae Praeneste	19
Simulation and analysis of material stacking and migration induced by extrusion behavior in 3D printed concrete	18
Cumulative deformation behavior of fiber-modified iron tailings under cyclic loading	18
Enhancing the flexural response of RC one-way slabs using low cost fiberglass chopped mat sheets and anchors	18
Bending performance of GFRP pultruded profile core sandwich structure reinforced by CFRP sheets	18
Resistance of cement composites with an alkali carbonate reaction (ACR) to chloride ions and the freeze-thaw cycles	18
Utilizing billet sintering for producing environmentally friendly porous tiles from brick waste and catalyst waste: Properties and moisture control applications	18
Influence of durability properties on life-cycle carbon reduction of low-carbon mortar with similar compressive strength	18
A comparative performance analysis of machine learning models for compressive strength prediction in fly ash-based geopolymers concrete using reference data	18
Steel corrosion induced shear performance deterioration of RC beams: Experimental investigation and numerical simulation	18
Energy consumption and carbon emissions of mixing plant in asphalt pavement construction with a case study in China and reduction measures	18
Dynamic behavior and residual performance of CFDSTCs under coupled collision and blast loads	18
Analysis of the service life of wooden bridge structures using structural protection	18
Novel vibratory compaction quality indices developed from particle migration and distribution characteristics for unbound aggregate materials	18
Utilization of soil microbial community to enhance mechanical properties of geopolymer paste for sustainable construction materials	18
Experimental study on disintegration failure mechanism of weak mudstones under dry-wet cycling effect	18
Study on erosion damage of aeolian sand concrete by wind-grit flow in Gobi gale area: laboratory experiment and numerical simulation	18
Laboratory testing of road performance and mechanism study of SBR/APAO composite modified asphalt and its mixtures	18
U-shaped pattern of acoustic emission energy in the accelerated cracking stage of moist mortar at low shear rates	18
Insights into the X-shaped fissure propagation and interaction mechanisms of rock specimens: 3D printing experiments and DEM simulations	17
Corrigendum to “Enhancing sustainability of amorphous-Wollastonitic hydraulic binders through incorporation of supplementary cementitious materials” [Case Stud. Constr. Mater. 21 (2024) e03380]	17
Corrigendum to “Case study of a batch asphalt mix plant: Energy consumption and emission allocation based on primary data” [Case Stud. Constr. Mater. 21 (2024) e03669]	17
Development of low carbon engineered cementitious composite (ECC) using nano lime calcined clay cement (nLC3) based matrix	17
Externally bonded reinforcement side extended (EBRSE) technique to postpone debonding of FRP laminates in strengthened concrete elements	17
Quantitative analysis of the aluminate interactions in model and real cement slag pastes at an early age	17
Evaluation of mechanical, durability and sustainability performance of geopolymer concrete using sodium silicate waste as source material	17
Numerical discrete element method investigation on mechanical properties of construction and demolition wastes within the critical state soil mechanics framework	17
Leather buffing dust in brick production: Solid waste management in tanneries	17
Durability of recycled aggregate concrete in cold regions	17
Retraction notice to “Mechanical and thermal characterization of bio-sourced mortars made from agricultural and industrial by-products”[Case Stud. Constr. Mater. 18 (2023) e01939]	17
Effectiveness of ultra-high-performance concrete containing recycled tire steel fibers and high-volume scoria rock powder as natural pozzolan	17
Investigation of color pigment incorporated roller compacted high performance concrete as a mitigation tool against urban heat island	17
Drop hammer flexural impact performance of concrete with different moisture states in severe cold environments	17
Data-driven mechanical property prediction and mix design optimization of recycled brick aggregate concrete	17
Case study on the uplift of tunnel segments due to grouting layer deterioration during shield tunnel operation in karst fissure development strata	17
Shear resistance and calculation method of GFRP-reinforced concrete beams with CFRP mesh fabric as shear reinforcement	17
Experimental study of self-leveling mortars produced with recycled concrete aggregates	17
Development and application of novel microfine cement-based grout	17
Bottom ash stabilized with cement and para rubber latex for road base applications	17
Improving the technological properties of red stoneware tiles derived from Ratchaburi red clay by the addition of iron oxide	17
Effect of waste oyster shell powder content on properties of cement-metakaolin mortar	17
Utilizing molybdenum tailings to prepare eco-friendly ultra-high performance concrete (UHPC): Workability, mechanical properties and life-cycle assessment	17
A state-of-the-art assessment in developing advanced concrete materials for airport pavements with improved performance and durability	16
Bio-stabilising earthen houses with tannins from locally available resources	16