Journal of Magnesium and Alloys

Article	Citations
Assessment of a two-surface plasticity model for hexagonal materials	483
Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys	460
Microstructural evolution of pre-twinned Mg alloy with annealing temperature and underlying boundary migration mechanism	394
Surface oxidation study of molten Mg–Al alloys by oxide/metal/oxide sandwich method	281
Effect of aging treatment on the precipitation transformation and age hardening of Mg-Gd-Y-Zn-Zr alloy	267
Insight into the evolution of lamellar and block LPSO phase of Mg-Gd-Y-Zn-Zr alloy with laser welding after post-weld solution and aging treatment	232
Cryogenic and conventional milling of AZ91 magnesium alloy	207
Carbon nanotube and graphene reinforced magnesium matrix composites: A state-of-the-art review	189
Photocatalytic application of magnesium spinel ferrite in wastewater remediation: A review	186
Effects of solidification rates on precipitation behavior of nano-particles and precipitation strengthening of ZA81M alloy	180
High-performance magnesium-based thermoelectric materials: Progress and challenges	172
Unraveling electrochemical performance of magnesium vanadate-based nanostructures as advanced cathodes for rechargeable aqueous zinc-ion batteries	164
Comprehensive study on corrosion, wear and fatigue performance of low-porosity PEO coating on Mg alloy	157
Exceptional thermal stability and enhanced hardness in a nanostructured Mg-Gd-Y-Zn-Zr alloy processed by high pressure torsion	154
Orientation-dependence of incipient plasticity in a coarse-grained Mg revealed by nanoindentation pop-ins	154
Effect of corrosion behavior of cast and extruded ZK60 magnesium alloys processed via friction extrusion	154
Improvement of strength and ductility of TC4p/AZ91D magnesium matrix composites by modifying the extrusion ratio	149
Discussion of the influence of Al content on the microstructure and mechanical properties of Mg-xAl-Zn alloys fabricated by wire arc additive manufacturing	146
Influence of Sr on microstructure evolution, mechanical and corrosion properties of extruded Mg-2Zn-0.5Ca alloy	146
Effect of electrochemical hydrogen charging on the microstructure and mechanical behavior of a duplex structured Mg-8wt.%Li alloy	145
Deceleration of porous magnesium alloy scaffold degradation and synchronization of bone defect repair by LIPUS-activated piezoelectric mineralization barrier	143
Loading direction dependence of asymmetric response of <c+a> pyramidal slip in rolled AZ31 magnesium alloy	142
Self-repairing functionality and corrosion resistance of in-situ Mg-Al LDH film on Al-alloyed AZ31 surface	137
Effect of TiO2 nanoparticles on the photocatalytic properties of PEO coatings on Mg alloy	137
The aging behavior, microstructure and mechanical properties of AlN/AZ91 composite	135

The mechanisms of grain growth of Mg alloys: A review	135
Maximizing precipitation hardening effect enables ultrahigh strength in a coarse-grained Mg-13Gd forging alloy	130
Phase transitions, lattice dynamics, thermal transport, and thermodynamic properties of Mg2V2O7 from experiments and first-principle calculations	129
Advanced prediction of organic–metal interactions through DFT study and electrochemical displacement approach	121
Experimental and theoretical studies on two-dimensional vanadium carbide hybrid nanomaterials derived from V4AlC3 as excellent catalyst for MgH2	120
GO/MgO/Mg interface mediated strengthening and electromagnetic interference shielding in AZ31 composite	119
Modeling hetero-deformation induced stress partitioning revealing non-basal slip activity in bimodal-grained ZK60 Mg alloy	119
Outstanding fatigue performance of Mg-Gd-Zn-Zr alloy enriched with SFs rather than LPSO Structure	116
Interface enhancement mechanism of rolled Mg/Al clad plate with particle interface control	116
Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution	108
Achieving balanced degradation and biological performance in Mg-Ag-Mn alloys via PEO process: Role of Mn addition and post-casting heat treatment	107
Effects of Ca and Nd addition on plastic instability in extruded Mg-Mn alloy deformed under various conditions	107
Ductility enhancement mechanism of laser welded magnesium alloy joints via synergistic effect of Gd powder addition and oscillating laser	106
Smart gradient coating suitable for bone growth prepared on plasma-electrolytically oxidised Mg and its sequential degradation behaviour	106
Collaborative enhancement of thermal diffusivities and mechanical properties of Csf-Cu/Mg composites via introducing Cu coating with different thicknesses	104
Micro-alloyed Mg-Ca: Corrosion susceptibility to heating history and a plain problem-solving approach	103
Biodegradable pure Mg fixation nails for guided bone regeneration membrane: In vitro and in vivo evaluation	102
Promoting catalysis in magnesium hydride for solid-state hydrogen storage through manipulating the elements of high entropy oxides	102
Clarifying the adverse effect of secondary phase on the tribological property of Mg alloy	101
Editorial Board	98
Tailoring the texture and mechanical properties of 3% Y2O3p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing	96
CTAB-assisted fabrication of hierarchical flower-like magnesium oxide adsorbent for enhanced removal performance towards phosphate	94
Hydroxyapatite-containing PEO-coating design for biodegradable Mg-0.8Ca alloy: Formation and corrosion behaviour	93
Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speed	92
Improvements in mechanical, corrosion, and biocompatibility properties of Mg–Zr–Sr–Dy alloys via extrusion for biodegradable implant applications	90
Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition	90
Enhancing the ductility of cast Mg-Li alloys via dispersed α-Mg phase mitigating the dimension and distribution of interspersed eutectics along grain boundaries	90
A highly degradable Mg-Al-Ca alloy with superior anti-tumor efficacy	89
In-situ high-dynamic micro hammering enhanced wire-arc direct energy deposition of magnesium alloy	87
Modifying hydrogen storage properties of the RE−Mg-based alloys with minor Sc addition	87
The coordinated evolution behavior of interface microstructure regulation and bonding strength of hot-spinning Mg/Al composite tubes under annealing	85
The threat of hemorrhage from pelvic fractures: Clinicians seeking new solutions based on biomedical Mg implant	84
Investigation of melt-spun pure Mg and MgCuCa alloys extracts on the fate of human adipose-derived mesenchymal stem cells	83
Mg alloy cardio-/cerebrovascular scaffolds: Developments and prospects	83
Analytical model to characterize temperature-dependent anisotropic-asymmetric behavior of Mg-Gd-Y alloy	83
Corrosion inhibition of AZ31 magnesium alloy in NaCl solution: Role of aromatic carboxylate molecular structures	82
Microstructure and electrochemical behavior of AZ91 Mg Alloy produced by laser powder bed fusion	81
Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO (x = 0.5, 1 wt.%) alloy	80
Advancements in Mg-based scaffolds for bone tissue engineering: From design strategies to clinical perspectives	80
Atomic-scale modeling of defects in magnesium and its alloys: A review	79
Characterizations on the instantaneously formed Ni-containing intermetallics in magnesium alloys	78
NaF assisted preparation and the improved corrosion resistance of high content ZnO doped plasma electrolytic oxidation coating on AZ31B alloy	77
A novel method towards improving the hydrogen storage properties of hypoeutectic Mg-Ni alloy via ultrasonic treatment	77
Development and prospects of degradable magnesium alloys for structural and functional applications in the fields of environment and energy	76
Novel Mg-Bi-Mn wrought alloys: The effects of extrusion temperature and Mn addition on their microstructures and mechanical properties	76
Simultaneously enhanced thermal conductivity and mechanical performance of carbon nanotube reinforced ZK61 matrix composite	75
Vanadium induces Ni-Co MOF formation from a NiCo LDH to catalytically enhance the MgH2 hydrogen storage performance	73
Corrosion resistance of a calcium carbonate coating prepared by ultrasound-assisted chemical conversion in calcium disodium edetate solution	73
Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: Review and perspective	72
The potential of deformable titanium reinforced magnesium‐matrix composites: A review of preparation, characterization, and performance evaluation	72

A novel Mg-Zn-Nd-Zr alloy lumbar interbody fusion cage: An in vitro and in vivo study	71
Laser powder bed fusion of Mg-6Gd-3Y-0.2Zr alloy: Excellent printability, heterogeneous microstructure and dedicated direct aging heat treatment	71
Effects of inorganic ions, organic particles, blood cells, and cyclic loading on in vitro corrosion of Mg Al alloys	70
Advances in magnesium-incorporated polymeric scaffolds: A next-generation strategy for enhanced wound healing	70
Features and classification of solid solution behavior of ternary Mg alloys	70
Editorial Board	69
Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture	69
Research progress on magnesium materials for structural, biomedical and energy applications	68
Very high cycle fatigue resistance improvement of Mg-Gd-Zn-Zr alloy by introducing curved long-period stacking ordered lamellae	68
New insights into combined thermal and vibration softening of magnesium alloy in rotational vibration assisted incremental sheet forming	68
Exploring high-performance magnesium-sulfur pouch cells using nitrogen-rich doped nano porous carbon	67
Effect of unusual texture on tension-compression asymmetry for Mg-RE alloy by viscoplastic self-consistent modeling	65
Achieving high-strain-rate and low-temperature superplasticity in an ECAP-processed Mg-Y-Er-Zn alloy via Ag addition	65
Developing new Mg alloy as potential bone repair material via constructing weak anode nano-lamellar structure	65
Superplasticity of a friction stir processed overaged WE54 magnesium alloy	64
The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy	64
Deep removal impurities in the process of preparing high-purity magnesium by vacuum gasification	64
Breaking strength-ductility trade-off in magnesium alloy by semi-solid extrusion process: Multi-slip activation in “Bimodal Grain”	63
Machine learning and non-thermal external fields: A dual-track paradigm for engineering high-performance of Mg-based hydrogen storage materials	63
A mini-review on magnesium alloy-based materials: Recent progress in photocatalysis, mechanistic insight & possibilities in photoreforming of plastic waste	62
Improved continuous precipitation kinetics and tensile properties of extruded AZ80 alloy through {10–12} twin formation	62
Insights into the texture-dependent strain hardening mechanisms of conform-processed AZ31 Mg alloys: Experimental investigations and VPSC modeling	62
One-step hydrothermal synthesis of 2,5-PDCA-containing MgAl-LDHs three-layer composite coating with high corrosion resistance on AZ31	62
Achieving high strength-ductility synergy in a Mg97Y1Zn1Ho1 alloy via a nano-spaced long-period stacking-ordered phase	61
Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy	61
Anisotropic FCGR behaviour in hot-rolled Mg-3Al-0.5Ce alloy	61
Physical and chemical interfacial engineering of Mg anodes for rechargeable magnesium batteries	61
Synergistic deformation of bimodal-structured AZ80 Mg alloy for excellent strength-ductility synergy via regulating the heterogeneity level	61
Effect of characteristics and distribution of Mg17Al12 precipitates on tensile and bending properties of high-Al-containing Mg alloys	61
Recent advances on the oxide film of ignition-proof magnesium alloys: A review	61
Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles	61
Magnesium-based biomaterials for coordinated tissue repair: A comprehensive overview of design strategies, advantages, and challenges	60
Simultaneously improving strength and ductility of Mg-Gd-Zr alloy via solute segregation	60
Preparation of the high compressive performance special-shaped Csf/AZ91D composite part using the liquid-solid extrusion following vacuum pressure infiltration process	60
Research on the degradation behaviors of biomedical Mg-2 wt.% Zn alloy under a biliary environment in vitro and in vivo	59
Editorial Board	59
Editorial Board	59
Effect of B4C on strength coefficient, cold deformation and work hardening exponent characteristics of Mg composites	58
Elucidating the process mechanism in Mg-to-Al friction stir lap welding enhanced by ultrasonic vibration	58
Synthesis of organic-inorganic 3D-nanocontainers for smart corrosion protection of friction stir welded AZ31B magnesium alloy-titanium dissimilar joints	57
Mechanism of slag pellets sticking on the wall of reduction pot in magnesium production by Pidgeon process	57
A route for large-scale preparation of multifunctional superhydrophobic coating with electrochemically-modified kaolin for efficient corrosion protection of magnesium alloys	57
Mechanistic switch in corrosion behavior of magnesium alloy diamond lattice structures induced by argon plasma treatment	57
Direct bonding of AZ31B and ZrO2 induced by interfacial sono-oxidation reaction at a low temperature	56
Developing a novel Mg 2Zn 3Li 1Gd alloy sheet with high room-temperature formability by introducing an elliptical texture distribution	56
Effects of Yb element on microstructure and mechanical properties of high-strength Mg-Sm-Gd(-Yb)-Zr extruded alloys	56
Interfacial processes of Mg anodes for magnesium-sulfur batteries: An EIS study	56
Mg/MgO interfaces as efficient hydrogen evolution cathodes causing accelerated corrosion of additive manufactured Mg alloys: A DFT analysis	56
Novel PA encapsulated PCL hybrid coating for corrosion inhibition of biodegradable Mg alloys: A triple triggered self-healing response for synergistic multiple protection	55
Atomic simulation of bimodal microstructure in wrought Mg-Al-Zn-Ca-Mn alloy	55
Local oxynitriding of AZ31 magnesium alloy by atmospheric-pressure plasma treatment at room temperature	55
Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension	55
Microstructure evolution and age-strengthening mechanism of Mg-Gd-Y-Zr alloy fabricated by additive friction stir deposition	55
Effect of different extrusion parameters on the microstructure and mechanical properties of Mg-4Sm-3Gd-2Yb-0.5Zr alloy	55
Microstructure and mechanical properties of curved AZ31 magnesium alloy profiles produced by differential velocity sideways extrusion	55
Overcoming oxidation and enhancing dispersion of nanoparticles via molten salt: Configurational distribution of TiCnp in pure Mg	55
One developed finite element model used in nano-layered flaky Ti2AlC MAX ceramic particles reinforced magnesium composite	54
Acetic acid additive in NaNO3 aqueous electrolyte for long-lifespan Mg-air batteries	54
Design multifunctional Mg–Zr coatings regulating Mg alloy bioabsorption	54
Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy	54
In situ formed Mg(BH4)2 for improving hydrolysis properties of MgH2	54
In vivo degradability and biocompatibility of a rheo-formed Mg–Zn–Sr alloy for ureteral implantation	53
Micro-alloying of Zn and Ca in vacuum induction casted bioresorbable Mg system: Perspectives on corrosion resistance, cytocompatibility, and inflammatory response	53
Greening Pidgeon process with deoxidized diamond-wire sawing silicon waste	53
A novel carbon-induced-porosity mechanism for improved cycling stability of magnesium hydride	53
Fabrication of high-density twins and precipitates in a rare-earth magnesium alloy with superior work hardening and ultimate strength	53
Construction of an Arrhenius constitutive model for Mg-Y-Nd-Zr-Gd rare earth magnesium alloy based on the Zener-Hollomon parameter and objective evaluation of its accuracy in the twinning-rich interva	53
Biodegradation and biocompatibility of calcium phosphate-coated magnesium in eye environment, in vitro and in vivo	52
Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications: A review	52
Interfacial bonding, texture evolution, and mechanical properties of different structured extruded Mg-7Gd-4Y-1Zn-0.2Zr and Mg-3Zn-1Al-1Ca-0.5Mn composites	52
Solid-state additively manufactured Mg-Al-Zn-Mn alloys: Effects of Al content on microstructures and mechanical properties	52
An in-situ study of static recrystallization in Mg using high temperature EBSD	52
Effect of warm rotary swaging on the mechanical and operational properties of the biodegradable Mg-1 %Zn-0.6 %Ca alloy	52
Bimodal grain structure formation and strengthening mechanisms in Mg-Mn-Al-Ca extrusion alloys	51
Quasi-in-situ study on {10-12} twinning-detwinning behavior of rolled Mg-Li alloy in two-step compression (RD)-compression (ND) process	51
Degradation behavior of pure Mg in the physiological medium and growth mechanism of surface corrosion product films	51
High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys	50
Twinning mediated anisotropic fracture behavior in bioimplant grade hot-rolled pure magnesium	50
Effect of double-extrusion following by stepwise-hot-rolling on microstructures and mechanical properties of Mg-Gd-Y-Zn-Zr alloy	50
Degradation of Mg-Zn-Y-Nd alloy intestinal stent and its effect on the growth of intestinal endothelial tissue in rabbit model	50

Evaluation of elastic-viscoplastic self-consistent models for a rolled AZ31B magnesium alloy under monotonic loading along five different material orientations and free-end torsion	50
Deformation mechanism of high ductility Mg-Gd-Mn alloy during tensile process	50
Enhanced printability, grain refinement and strength-ductility synergy in a Sc modified Mg-Gd alloy fabricated by laser powder bed fusion	50
Effect of Al addition on microstructure, texture evolution and mechanical properties of Mg-1Zn-1Y-0.1Mn alloy sheets	50
Developing an efficient anticorrosive system through advanced modification of plasma-electrolyzed MgO with CeNiLDH complexed with V₂O₅ nanoparticles and (2E)-But-2-enedioic acid	50
Research advances in multi-scale numerical simulations of forming and microstructures for magnesium alloys	50
Is Mg17Al12 ductile or brittle? A theoretical insight	50
Effect of ternary transition metal sulfide FeNi2S4 on hydrogen storage performance of MgH2	50
Mechanistic investigation of highly bendable magnesium alloy sheet fabricated by short-process manufacturing	49
Progress and prospects in magnesium alloy scrap recycling	49
Stress-corrosion coupled damage localization induced by secondary phases in bio-degradable Mg alloys: phase-field modeling	49
Structure-activity relationship on tensile properties under DRX and slip system activity of U-CVCDEed AZ31 magnesium alloy	48
Editorial Board	48
High strength-ductility synergy achieved in low-alloyed Mg alloys via hyper-substructure introduction through upsetting-assisted asymmetric extrusion	48
Editorial Board	48
Simultaneously improving mechanical and corrosion properties of Mg-Y-Nd-Zr alloy via Sm addition	48
Corrigendum to ‘Mechanical and corrosion properties of full liquid phase sintered WE43 magnesium alloy specimens fabricated via binder jetting additive manufacturing’ Journal of Magnesium and Alloys 1	48
Controlled preparation of a novel GNP@MgO particles and its refinement mechanism in Mg-9Al alloy	47
Magnesium alloys for orthopedic applications:A review on the mechanisms driving bone healing	47
Coupling physics in machine learning to investigate the solution behavior of binary Mg alloys	47
Bi nanoparticles encapsulated in nitrogen-doped carbon as a long-life anode material for magnesium batteries	47
Microstructure and mechanical properties of ZK61 magnesium alloy thin-walled cylindrical component processed by two-step forging	47
Novel interface engineering of LDH-based materials on Mg alloy for efficient photocatalytic systems considering the geometrical linearity of condensed phosphates	47
A novel Mg-Gd-Y-Zn-Cu-Ni alloy with excellent combination of strength and dissolution via peak-aging treatment	47
Enhanced ductility of AZ31B magnesium alloy through a combined pre-stretching and electromagnetically induced electric pulse treatment process	47
Optimization of corrosion resistance of AZ31 Mg alloy through hydration-driven interaction between quinolin-8-ol and plasma electrolytic oxidation-formed MgO layer	46
Effect of Gd content on microstructure and mechanical properties of Mg-xGd-Zr alloys via semicontinuous casting	46
Understanding pyramidal slip-induced deformation bands and dynamic recrystallization in AZWX3100 magnesium alloy	46
High sintering and dielectric performance: The improved (Mg, Zn)3B2O6 ceramics with the help of the DFT calculation	46
Low-cycle fatigue behaviour of Mg-9Gd-4Y-2Zn-0.5Zr alloys with different structures	46
Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties	46
Editorial Board	46
A multi-functional MgF2/polydopamine/hyaluronan-astaxanthin coating on the biodegradable ZE21B alloy with better corrosion resistance and biocompatibility for cardiovascular application	46
A review on recent advancements in biodegradable Mg-Ca alloys	46
Analysis of the protective behavior and mechanism of MgO-C-Mg film for crude magnesium smelting	45
In-situ LDHs growth on PEO coatings on AZ31 magnesium alloy for active protection: Roles of PEO composition and conversion solution	45
Four new orientation relationships of Mg17Al12 phase with magnesium matrix in Mg-8Al-0.5Zn alloys	45
Mechanism of plasticity enhancement of AZ31B magnesium alloy sheet by accumulative alternating back extrusion	45
Tailoring microstructure and strength-ductility synergy in AZ91D/ZrO₂ magnesium matrix composite by dual eccentric-pin tool friction stir processing	45
Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy	44
Research, development and application of compound-vertical-retort technology for magnesium production	44
Unusual F3 stacking fault in magnesium	44
Magnesium-rare earth intermetallic compounds for high performance high power aqueous Magnesium-Air batteries	44
The effects of deformation parameters and cooling rates on the aging behavior of AZ80+0.4%Ce	44
Bioactive Ca-P coatings on WE43 alloy via soft sparking PEO: Structure, electrochemical performance and cytotoxicity studies	43
Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi-in situ SEM approach and first-principles calculation	43
An innovative joint interface design for reducing intermetallic compounds and improving joint strength of thick plate friction stir welded Al/Mg joints	43
The role of the Mg17Al12-phase in the high-pressure die-cast magnesium-aluminum alloy system	43
Degradation characteristics of high-purity magnesium implants under single static and cyclic compressive loads in vivo and in vitro	43
Crack propagation path deflection induced by α-Mg / LPSO interface and its effect on the fracture toughness of cast Mg-RE-Zn alloys	43
Texture traits and mechanical anisotropy of AZ31 magnesium alloy sheet by hard plate cross rolling	43
Effect of nanostructured MgO directly grown on pure magnesium substrate on its in vitro corrosion and bioactivity behaviour	43
Organic cathode materials for rechargeable magnesium-ion batteries: Fundamentals, recent advances, and approaches to optimization	43
Development of 3D bicontinuous metal–intermetallic composites through subsequent alloying process after liquid metal dealloying	43
Revealing the dynamic recrystallization and deformation instability of TiC reinforced AZ61 composites with uniform structure and bimodal grain structure	42
TiCrNb hydride fabricated by melt spinning as the efficient catalyst for enhancing the hydrogen storage properties of MgH2	42
Simultaneously improving thermal conductivity, mechanical properties and metal fluidity through Cu alloying in Mg-Zn-based alloys	42
Development of in-situ porous Ti particle reinforced Mg-Cu-Gd metallic glass matrix composite with dual-scale reinforcing structures	41
Twin-twin geometric structure effect on the twinning behavior of an Mg-4Y-3Nd-2Sm-0.5Zr alloy traced by quasi-in-situ EBSD	41
Self-assembled biodegradable herbal-based nanoflower decorative magnesium implants combine therapy with bone regeneration	41
Surface modification of magnesium alloys using thermal and solid-state cold spray processes: Challenges and latest progresses	41
Mechanical and corrosion properties of full liquid phase sintered WE43 magnesium alloy specimens fabricated via binder jetting additive manufacturing	41
New superhydrophobic composite coatings on Mg-Mn-Ce magnesium alloy	41
Recrystallization aspects and factors affecting their roles in Mg alloys: A comprehensive review	41
Developing a novel high-strength Mg-Gd-Y-Zn-Mn alloy for laser powder bed fusion additive manufacturing process	40
Wire-based friction stir additive manufacturing of AZ31B magnesium alloy: Precipitate behavior and mechanical properties	40
Improvement in electromagnetic shielding effectiveness and mechanical properties of ultrafine Mg98.5Zn0.5Y alloy via friction stir processing	40
Revealing the role of pyramidal <c+a> slip in the high ductility of Mg-Li alloy	40
Improvement of corrosion resistance of PEO coated dissimilar Ti/Mg0.6Ca couple	40
Introducing MagBERT: A language model for magnesium textual data mining and analysis	40
Enhanced microstructural homogeneity and tensile properties of bimodal AZ31 alloy sheet via combined ultrasonic nanocrystal surface modification and electropulsing treatment	40
Review on friction stir welding of dissimilar magnesium and aluminum alloys: Scientometric analysis and strategies for achieving high-quality joints	40
Structural and defect engineering of Pt-loaded MAX fibers with oxygen vacancies for enhanced hydrogen storage properties of MgH2	40
In situ investigation of the activation characteristics of basal slip systems in Mg-Y-Nd-Zr-Gd alloy: From the perspective of Schmid's law and plasticity transfer	39
High formability Mg-Zn-Gd wire facilitates ACL reconstruction via its swift degradation to accelerate intra-tunnel endochondral ossification	39
Wetting behavior of Mo, Ta, and stainless steel substrates in contact with molten Mg	39
Improving hydrogen storage thermodynamics and kinetics of Ce-Mg-Ni-based alloy by mechanical milling with TiF3	39
Deformation of wire-arc additively manufactured magnesium alloy under uniaxial tension: In situ synchrotron X-ray diffraction and tomography study	39
Editorial Board	39
Robust and resilient Mg–NiTi interpenetrating-phase composites with triply periodic minimal surface configuration	39
Design of 8HQ@ZIF-8/PDA smart nanocontainers via host-guest nanoconfinement and surface self-assembly for enhanced corrosion protection and self-healing of magnesium alloy epoxy composite coatings	39
Tensile creep anisotropy and analysis based on composite theory of duplex Mg-9Li-4Al-1Zn alloy with geometric and mechanical heterogeneity	39
Editorial Board	39
On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced	38
Anodic behaviour of Mg at pre-breakdown stages of PEO in basic electrolytes	38
Lightweight design and manufacture of die casting magnesium alloy seat frame	38
Self-healing coatings on Mg-Li alloy using pH-responsive sepiolite microcontainer loaded with corrosion inhibitors	38
Magnesium alloys in tumor treatment: Current research status, challenges and future prospects	38
Deformation mechanism, orientation evolution and mechanical properties of annealed cross-rolled Mg-Zn-Zr-Y-Gd sheet during tension	38
Effect of temperature and β-phase morphology on the high-stress creep of magnesium-aluminum-rare earth alloys	37
Promoting dynamic recrystallization and improving strength and ductility of Mg–7Bi alloy through Al addition	37
Inhibiting effect of I-phase formation on the plastic instability of the duplex structured Mg-8Li-6Zn-1.2Y (in wt.%) alloy	37
Effect of solute atom adsorption on heterogeneous nucleation by in-situ MgO particles: Experimental and theoretical studies	37
Extra-conventional strengthening mechanisms in non-recrystallized grains of an extruded Mg-Gd-Zr alloy	37
Role of Ca content on microstructure, mechanical properties and strain evolution of as-rolled Mg-Al-Ca-Zn-Mn alloy	37