Journal of Magnesium and Alloys

Papers
(The median citation count of Journal of Magnesium and Alloys is 10. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Assessment of a two-surface plasticity model for hexagonal materials718
Effect of electrochemical hydrogen charging on the microstructure and mechanical behavior of a duplex structured Mg-8wt.%Li alloy418
Comprehensive study on corrosion, wear and fatigue performance of low-porosity PEO coating on Mg alloy393
Unraveling electrochemical performance of magnesium vanadate-based nanostructures as advanced cathodes for rechargeable aqueous zinc-ion batteries379
Outstanding fatigue performance of Mg-Gd-Zn-Zr alloy enriched with SFs rather than LPSO Structure376
The effect of powder size on the mechanical and corrosion properties and the ignition temperature of WE43 alloy prepared by spark plasma sintering278
Phase transitions, lattice dynamics, thermal transport, and thermodynamic properties of Mg2V2O7 from experiments and first-principle calculations252
Interface enhancement mechanism of rolled Mg/Al clad plate with particle interface control223
Nucleation of recrystallization in magnesium alloy grains of varied orientation and the impacts on texture evolution204
Influence of Sr on microstructure evolution, mechanical and corrosion properties of extruded Mg-2Zn-0.5Ca alloy190
High-performance magnesium-based thermoelectric materials: Progress and challenges180
Effects of Ca and Nd addition on plastic instability in extruded Mg-Mn alloy deformed under various conditions162
Maximizing precipitation hardening effect enables ultrahigh strength in a coarse-grained Mg-13Gd forging alloy159
Loading direction dependence of asymmetric response of <c+a> pyramidal slip in rolled AZ31 magnesium alloy154
Recent advances using equal-channel angular pressing to improve the properties of biodegradable Mg‒Zn alloys150
Surface oxidation study of molten Mg–Al alloys by oxide/metal/oxide sandwich method128
Advanced prediction of organic–metal interactions through DFT study and electrochemical displacement approach126
Carbon nanotube and graphene reinforced magnesium matrix composites: A state-of-the-art review121
Effect of TiO2 nanoparticles on the photocatalytic properties of PEO coatings on Mg alloy118
Effect of corrosion behavior of cast and extruded ZK60 magnesium alloys processed via friction extrusion115
Effects of heat treatment on mechanical properties of an extruded Mg-4.3Gd-3.2Y-1.2Zn-0.5Zr alloy and establishment of its Hall–Petch relation115
Effect of aging treatment on the precipitation transformation and age hardening of Mg-Gd-Y-Zn-Zr alloy112
Self-repairing functionality and corrosion resistance of in-situ Mg-Al LDH film on Al-alloyed AZ31 surface104
The aging behavior, microstructure and mechanical properties of AlN/AZ91 composite103
Corrosion behavior of a Mg–Zn–Ca–La alloy in 3.5 wt% NaCl solution102
GO/MgO/Mg interface mediated strengthening and electromagnetic interference shielding in AZ31 composite101
Exceptional thermal stability and enhanced hardness in a nanostructured Mg-Gd-Y-Zn-Zr alloy processed by high pressure torsion101
Active catalytic species generated in situ in zirconia incorporated hydrogen storage material magnesium hydride100
Cryogenic and conventional milling of AZ91 magnesium alloy99
Improvement of strength and ductility of TC4p/AZ91D magnesium matrix composites by modifying the extrusion ratio97
Research advances in magnesium and magnesium alloys worldwide in 202095
The mechanisms of grain growth of Mg alloys: A review94
Microstructural evolution of pre-twinned Mg alloy with annealing temperature and underlying boundary migration mechanism93
Photocatalytic application of magnesium spinel ferrite in wastewater remediation: A review93
Experimental and theoretical studies on two-dimensional vanadium carbide hybrid nanomaterials derived from V4AlC3 as excellent catalyst for MgH293
Editorial Board92
Corrosion resistance of a calcium carbonate coating prepared by ultrasound-assisted chemical conversion in calcium disodium edetate solution91
Editorial Board91
Underlying mechanisms of variation in yield asymmetry and strain hardening behavior of extruded pure Mg with Gd addition90
The threat of hemorrhage from pelvic fractures: Clinicians seeking new solutions based on biomedical Mg implant90
Room and cryogenic deformation behavior of AZ61 and AZ61-xCaO (x = 0.5, 1 wt.%) alloy88
Micro-alloyed Mg-Ca: Corrosion susceptibility to heating history and a plain problem-solving approach88
Collaborative enhancement of thermal diffusivities and mechanical properties of Csf-Cu/Mg composites via introducing Cu coating with different thicknesses88
Simultaneously enhanced thermal conductivity and mechanical performance of carbon nanotube reinforced ZK61 matrix composite87
NaF assisted preparation and the improved corrosion resistance of high content ZnO doped plasma electrolytic oxidation coating on AZ31B alloy85
In-situ high-dynamic micro hammering enhanced wire-arc direct energy deposition of magnesium alloy84
Laser powder bed fusion of Mg-6Gd-3Y-0.2Zr alloy: Excellent printability, heterogeneous microstructure and dedicated direct aging heat treatment83
Smart gradient coating suitable for bone growth prepared on plasma-electrolytically oxidised Mg and its sequential degradation behaviour83
Development and prospects of degradable magnesium alloys for structural and functional applications in the fields of environment and energy83
Characterizations on the instantaneously formed Ni-containing intermetallics in magnesium alloys82
Vanadium induces Ni-Co MOF formation from a NiCo LDH to catalytically enhance the MgH2 hydrogen storage performance79
Modifying hydrogen storage properties of the RE−Mg-based alloys with minor Sc addition76
Tailoring the texture and mechanical properties of 3% Y2O3p/ZGK200 composites fabricated by unidirectional and cross rolling followed by annealing76
Analytical model to characterize temperature-dependent anisotropic-asymmetric behavior of Mg-Gd-Y alloy71
Clarifying the adverse effect of secondary phase on the tribological property of Mg alloy71
A novel method towards improving the hydrogen storage properties of hypoeutectic Mg-Ni alloy via ultrasonic treatment71
Mg alloy cardio-/cerebrovascular scaffolds: Developments and prospects70
Enhancing the ductility of cast Mg-Li alloys via dispersed α-Mg phase mitigating the dimension and distribution of interspersed eutectics along grain boundaries70
Improvements in mechanical, corrosion, and biocompatibility properties of Mg–Zr–Sr–Dy alloys via extrusion for biodegradable implant applications69
A highly degradable Mg-Al-Ca alloy with superior anti-tumor efficacy69
Novel Mg-Bi-Mn wrought alloys: The effects of extrusion temperature and Mn addition on their microstructures and mechanical properties69
Improving the ductility and toughness of nano-TiC/AZ61 composite by optimizing bimodal grain microstructure via extrusion speed69
CTAB-assisted fabrication of hierarchical flower-like magnesium oxide adsorbent for enhanced removal performance towards phosphate68
Optimizing mechanical properties of magnesium alloys by philosophy of thermo-kinetic synergy: Review and outlook68
Hydroxyapatite-containing PEO-coating design for biodegradable Mg-0.8Ca alloy: Formation and corrosion behaviour66
Microstructures and mechanical properties of titanium-reinforced magnesium matrix composites: Review and perspective66
Promoting catalysis in magnesium hydride for solid-state hydrogen storage through manipulating the elements of high entropy oxides65
One-step hydrothermal synthesis of 2,5-PDCA-containing MgAl-LDHs three-layer composite coating with high corrosion resistance on AZ3165
Anisotropic FCGR behaviour in hot-rolled Mg-3Al-0.5Ce alloy65
Biodegradable Mg alloys for orthopedic implants – A review65
Synergistic deformation of bimodal-structured AZ80 Mg alloy for excellent strength-ductility synergy via regulating the heterogeneity level64
Microstructure and mechanical behavior of similar butt-joints of ZK60 and ZK60–1.5RE magnesium alloys produced by linear friction stir welding64
Research on the degradation behaviors of biomedical Mg-2 wt.% Zn alloy under a biliary environment in vitro and in vivo64
Superplasticity of a friction stir processed overaged WE54 magnesium alloy63
Very high cycle fatigue resistance improvement of Mg-Gd-Zn-Zr alloy by introducing curved long-period stacking ordered lamellae63
Effects of extrusion die cavity on the texture components and the associated mechanical properties for ZK60 magnesium alloy63
Effect of unusual texture on tension-compression asymmetry for Mg-RE alloy by viscoplastic self-consistent modeling62
Recent progress in superhydrophobic coating on Mg alloys: A general review61
The effect of different high pressure die casting parameters on 3D microstructure and mechanical properties of AE44 magnesium alloy60
Simultaneously improving strength and ductility of Mg-Gd-Zr alloy via solute segregation60
Physical and chemical interfacial engineering of mg anodes for rechargeable magnesium batteries60
Effect of characteristics and distribution of Mg17Al12 precipitates on tensile and bending properties of high-Al-containing Mg alloys59
Anisotropic cyclic deformation behavior of an extruded Mg-3Y alloy sheet with rare earth texture59
Preparation of the high compressive performance special-shaped Csf/AZ91D composite part using the liquid-solid extrusion following vacuum pressure infiltration process58
A novel Mg-Zn-Nd-Zr alloy lumbar interbody fusion cage: An in vitro and in vivo study58
Features and classification of solid solution behavior of ternary Mg alloys58
Effects of inorganic ions, organic particles, blood cells, and cyclic loading on in vitro corrosion of Mg Al alloys58
Deep removal impurities in the process of preparing high-purity magnesium by vacuum gasification58
Recent advances on the oxide film of ignition-proof magnesium alloys: A review57
Improved continuous precipitation kinetics and tensile properties of extruded AZ80 alloy through {10–12} twin formation57
Achieving high strength-ductility synergy in a Mg97Y1Zn1Ho1 alloy via a nano-spaced long-period stacking-ordered phase56
Coupled CA-FE simulation for dynamic recrystallization of magnesium alloy during hot extrusion56
Magnesium-based biomaterials for coordinated tissue repair: A comprehensive overview of design strategies, advantages, and challenges56
Achieving high-strain-rate and low-temperature superplasticity in an ECAP-processed Mg-Y-Er-Zn alloy via Ag addition56
Developing new Mg alloy as potential bone repair material via constructing weak anode nano-lamellar structure55
Nanoscale analysis of interfacial structure and its effects on mechanical properties of Mg/Al laminate reinforced by TiB2 particles55
Editorial Board54
Overcoming oxidation and enhancing dispersion of nanoparticles via molten salt: Configurational distribution of TiCnp in pure Mg54
Effect of different extrusion parameters on the microstructure and mechanical properties of Mg-4Sm-3Gd-2Yb-0.5Zr alloy54
In vivo degradability and biocompatibility of a rheo-formed Mg–Zn–Sr alloy for ureteral implantation53
Mechanistic switch in corrosion behavior of magnesium alloy diamond lattice structures induced by argon plasma treatment53
Synthesis of organic-inorganic 3D-nanocontainers for smart corrosion protection of friction stir welded AZ31B magnesium alloy-titanium dissimilar joints53
Direct bonding of AZ31B and ZrO2 induced by interfacial sono-oxidation reaction at a low temperature53
Mechanism of slag pellets sticking on the wall of reduction pot in magnesium production by Pidgeon process52
Design of multilayer hybrid sol-gel coatings with bifunctional barrier-bioactive response on the Elektron 21 magnesium alloy for biomedical applications51
Design multifunctional Mg–Zr coatings regulating Mg alloy bioabsorption51
Clarifying the influence of albumin on the initial stages of magnesium corrosion in Hank's balanced salt solution51
Elucidating the process mechanism in Mg-to-Al friction stir lap welding enhanced by ultrasonic vibration50
Interfacial bonding, texture evolution, and mechanical properties of different structured extruded Mg-7Gd-4Y-1Zn-0.2Zr and Mg-3Zn-1Al-1Ca-0.5Mn composites50
Construction of an Arrhenius constitutive model for Mg-Y-Nd-Zr-Gd rare earth magnesium alloy based on the Zener-Hollomon parameter and objective evaluation of its accuracy in the twinning-rich interva50
Micro-alloying of Zn and Ca in vacuum induction casted bioresorbable Mg system: Perspectives on corrosion resistance, cytocompatibility, and inflammatory response50
Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and process50
Microstructure and mechanical properties of curved AZ31 magnesium alloy profiles produced by differential velocity sideways extrusion50
Quasi-in-situ study on {10-12} twinning-detwinning behavior of rolled Mg-Li alloy in two-step compression (RD)-compression (ND) process50
Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy49
Effect of warm rotary swaging on the mechanical and operational properties of the biodegradable Mg-1 %Zn-0.6 %Ca alloy49
Biodegradation and biocompatibility of calcium phosphate-coated magnesium in eye environment, in vitro and in vivo49
High-throughput calculations combining machine learning to investigate the corrosion properties of binary Mg alloys49
A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys49
The effects of orientation control via tension-compression on microstructural evolution and mechanical behavior of AZ31 Mg alloy sheet49
A novel carbon-induced-porosity mechanism for improved cycling stability of magnesium hydride49
In situ formed Mg(BH4)2 for improving hydrolysis properties of MgH248
Effects of Yb element on microstructure and mechanical properties of high-strength Mg-Sm-Gd(-Yb)-Zr extruded alloys47
Degradation behavior of pure Mg in the physiological medium and growth mechanism of surface corrosion product films47
Novel PA encapsulated PCL hybrid coating for corrosion inhibition of biodegradable Mg alloys: A triple triggered self-healing response for synergistic multiple protection47
Developing a novel Mg 2Zn 3Li 1Gd alloy sheet with high room-temperature formability by introducing an elliptical texture distribution47
Bimodal grain structure formation and strengthening mechanisms in Mg-Mn-Al-Ca extrusion alloys46
An in-situ study of static recrystallization in Mg using high temperature EBSD46
Mg/MgO interfaces as efficient hydrogen evolution cathodes causing accelerated corrosion of additive manufactured Mg alloys: A DFT analysis46
Developing an efficient anticorrosive system through advanced modification of plasma-electrolyzed MgO with CeNiLDH complexed with V₂O₅ nanoparticles and (2E)-But-2-enedioic acid46
Effect of B4C on strength coefficient, cold deformation and work hardening exponent characteristics of Mg composites45
Corrosion and corrosion-fatigue behavior of magnesium metal matrix composites for bio-implant applications: A review45
One developed finite element model used in nano-layered flaky Ti2AlC MAX ceramic particles reinforced magnesium composite44
Local oxynitriding of AZ31 magnesium alloy by atmospheric-pressure plasma treatment at room temperature44
Evolution of deformation mechanisms and their orientation dependence in fine-grained Mg-3Gd during tension44
Magnesium alloys as anodes for neutral aqueous magnesium-air batteries44
A route for large-scale preparation of multifunctional superhydrophobic coating with electrochemically-modified kaolin for efficient corrosion protection of magnesium alloys44
Twinning mediated anisotropic fracture behavior in bioimplant grade hot-rolled pure magnesium43
Bio-modulation of scaring Glaucoma Filtration Surgery using a novel application of coated magnesium43
Evaluation of elastic-viscoplastic self-consistent models for a rolled AZ31B magnesium alloy under monotonic loading along five different material orientations and free-end torsion43
Acetic acid additive in NaNO3 aqueous electrolyte for long-lifespan Mg-air batteries43
A review on recent advancements in biodegradable Mg-Ca alloys42
Degradation of Mg-Zn-Y-Nd alloy intestinal stent and its effect on the growth of intestinal endothelial tissue in rabbit model42
Structure-activity relationship on tensile properties under DRX and slip system activity of U-CVCDEed AZ31 magnesium alloy42
Microstructure and mechanical properties of ZK61 magnesium alloy thin-walled cylindrical component processed by two-step forging42
Coupling physics in machine learning to investigate the solution behavior of binary Mg alloys42
Controlled preparation of a novel GNP@MgO particles and its refinement mechanism in Mg-9Al alloy42
Mechanistic investigation of highly bendable magnesium alloy sheet fabricated by short-process manufacturing42
Low-cycle fatigue behaviour of Mg-9Gd-4Y-2Zn-0.5Zr alloys with different structures42
Optimization of corrosion resistance of AZ31 Mg alloy through hydration-driven interaction between quinolin-8-ol and plasma electrolytic oxidation-formed MgO layer42
PEO processing of AZ91Nd/Al2O3 MMC-the role of alumina fibers41
Bi nanoparticles encapsulated in nitrogen-doped carbon as a long-life anode material for magnesium batteries41
Influence of nano-diamond content on the microstructure, mechanical and thermal properties of the ZK60 composites41
Stress-corrosion coupled damage localization induced by secondary phases in bio-degradable Mg alloys: phase-field modeling41
Effects of minor Nd and Er additions on the precipitation evolution and dynamic recrystallization behavior of Mg–6.0Zn–0.5Mn alloy41
Wire arc additive manufacturing of a novel ATZM31 Mg alloy: Microstructure evolution and mechanical properties41
Effect of Gd content on microstructure and mechanical properties of Mg-xGd-Zr alloys via semicontinuous casting41
Is Mg17Al12 ductile or brittle? A theoretical insight40
Progress and prospects in magnesium alloy scrap recycling40
A multi-functional MgF2/polydopamine/hyaluronan-astaxanthin coating on the biodegradable ZE21B alloy with better corrosion resistance and biocompatibility for cardiovascular application40
A novel Mg-Gd-Y-Zn-Cu-Ni alloy with excellent combination of strength and dissolution via peak-aging treatment39
Effect of ternary transition metal sulfide FeNi2S4 on hydrogen storage performance of MgH239
Novel interface engineering of LDH-based materials on Mg alloy for efficient photocatalytic systems considering the geometrical linearity of condensed phosphates39
Understanding pyramidal slip-induced deformation bands and dynamic recrystallization in AZWX3100 magnesium alloy39
Magnesium alloys for orthopedic applications:A review on the mechanisms driving bone healing39
Deformation mechanism of high ductility Mg-Gd-Mn alloy during tensile process39
Research advances in multi-scale numerical simulations of forming and microstructures for magnesium alloys39
Analysis of the protective behavior and mechanism of MgO-C-Mg film for crude magnesium smelting38
Editorial Board38
Mechanical and corrosion properties of full liquid phase sintered WE43 magnesium alloy specimens fabricated via binder jetting additive manufacturing38
TiCrNb hydride fabricated by melt spinning as the efficient catalyst for enhancing the hydrogen storage properties of MgH238
Texture traits and mechanical anisotropy of AZ31 magnesium alloy sheet by hard plate cross rolling38
A special editor's issue on Mg-based functional materials: Design and development38
Self-assembled biodegradable herbal-based nanoflower decorative magnesium implants combine therapy with bone regeneration38
Degradation characteristics of high-purity magnesium implants under single static and cyclic compressive loads in vivo and in vitro38
Improvement of corrosion resistance of PEO coated dissimilar Ti/Mg0.6Ca couple38
Mechanism of plasticity enhancement of AZ31B magnesium alloy sheet by accumulative alternating back extrusion37
Crack propagation path deflection induced by α-Mg / LPSO interface and its effect on the fracture toughness of cast Mg-RE-Zn alloys37
Development of in-situ porous Ti particle reinforced Mg-Cu-Gd metallic glass matrix composite with dual-scale reinforcing structures37
Simple shear extrusion versus equal channel angular pressing: A comparative study on the microstructure and mechanical properties of an Mg alloy37
Investigation on microstructures and mechanical properties of Mg–6Zn–0.5Ce–xMn (x = 0 and 1) wrought magnesium alloys37
The effects of deformation parameters and cooling rates on the aging behavior of AZ80+0.4%Ce37
Research, development and application of compound-vertical-retort technology for magnesium production37
Developing a novel high-strength Mg-Gd-Y-Zn-Mn alloy for laser powder bed fusion additive manufacturing process36
Revealing the role of pyramidal <c+a> slip in the high ductility of Mg-Li alloy36
Unusual F3 stacking fault in magnesium36
Improving mechanical properties of AZ91D magnesium/A356 aluminum bimetal prepared by compound casting via a high velocity oxygen fuel sprayed Ni coating36
Magnesium-rare earth intermetallic compounds for high performance high power aqueous Magnesium-Air batteries35
The role of the Mg17Al12-phase in the high-pressure die-cast magnesium-aluminum alloy system35
Organic cathode materials for rechargeable magnesium-ion batteries: Fundamentals, recent advances, and approaches to optimization35
Initial micro-galvanic corrosion behavior between Mg2Ca and α-Mg via quasi-in situ SEM approach and first-principles calculation35
An innovative joint interface design for reducing intermetallic compounds and improving joint strength of thick plate friction stir welded Al/Mg joints35
Development of 3D bicontinuous metal–intermetallic composites through subsequent alloying process after liquid metal dealloying35
New superhydrophobic composite coatings on Mg-Mn-Ce magnesium alloy35
Recrystallization aspects and factors affecting their roles in Mg alloys: A comprehensive review35
In-situ LDHs growth on PEO coatings on AZ31 magnesium alloy for active protection: Roles of PEO composition and conversion solution35
Editorial Board34
Four new orientation relationships of Mg17Al12 phase with magnesium matrix in Mg-8Al-0.5Zn alloys34
Simultaneously improving thermal conductivity, mechanical properties and metal fluidity through Cu alloying in Mg-Zn-based alloys34
Effect of solute atom adsorption on heterogeneous nucleation by in-situ MgO particles: Experimental and theoretical studies34
Surface modification of magnesium alloys using thermal and solid-state cold spray processes: Challenges and latest progresses34
Twin-twin geometric structure effect on the twinning behavior of an Mg-4Y-3Nd-2Sm-0.5Zr alloy traced by quasi-in-situ EBSD34
Editorial Board34
High sintering and dielectric performance: The improved (Mg, Zn)3B2O6 ceramics with the help of the DFT calculation34
Review on friction stir welding of dissimilar magnesium and aluminum alloys: Scientometric analysis and strategies for achieving high-quality joints34
Understanding the creep behaviors and mechanisms of Mg-Gd-Zn alloys via machine learning33
Design of 8HQ@ZIF-8/PDA smart nanocontainers via host-guest nanoconfinement and surface self-assembly for enhanced corrosion protection and self-healing of magnesium alloy epoxy composite coatings33
Dual-phase synergistically enhancing mechanical properties and thermal conductivity of hot-extruded Mg-8Gd-1Er-8Zn-1Mn alloy33
Introducing MagBERT: A language model for magnesium textual data mining and analysis33
Magnesium alloys in tumor treatment: Current research status, challenges and future prospects33
Extra-conventional strengthening mechanisms in non-recrystallized grains of an extruded Mg-Gd-Zr alloy33
Wetting behavior of Mo, Ta, and stainless steel substrates in contact with molten Mg33
Influence of recycled carbon fiber addition on the microstructure and creep response of extruded AZ91 magnesium alloy33
Catalytic mechanism of in-situ Ni/C co-incorporation for hydrogen absorption of Mg33
On the strengthening and slip activity of Mg-3Al-1Zn alloy with pre-induced {1033
Synergistic improvement of mechanical and electromagnetic shielding properties of a Mg-Li-Y-Zn alloy following heat treatment33
In vitro degradation and in vivo osteogenesis of Mg-Zn-Nd-Zr/HA composites prepared by friction stir processing33
Experimental and quantum chemical studies of carboxylates as corrosion inhibitors for AM50 alloy in pH neutral NaCl solution33
Role of Ca content on microstructure, mechanical properties and strain evolution of as-rolled Mg-Al-Ca-Zn-Mn alloy32
Assessment of Ti-6Al-4V particles as a reinforcement for AZ31 magnesium alloy-based composites to boost ductility incorporated through friction stir processing32
Realizing ultra-high strength and excellent ductility in a low-alloyed biomedical Mg-Zn-Ca-MgO composite32
Post processing of additive manufactured Mg alloys: Current status, challenges, and opportunities32
The key role of Zn in enhancing precipitation kinetics and refinement of Mg₁₇Al₁₂ and Mg₂Sn phases through trace Na additions32
Development of high-strength magnesium alloys with excellent ignition-proof performance based on the oxidation and ignition mechanisms: A review32
Modifying microstructures and tensile properties of Mg-Sm based alloy via extrusion ratio32
Continuous observation of twinning and dynamic recrystallization in ZM21 magnesium alloy tubes during locally heated dieless drawing32
Microstructure and battery performance of Mg-Zn-Sn alloys as anodes for magnesium-air battery32
Additive manufacturing of biodegradable magnesium-based materials: Design strategies, properties, and biomedical applications32
Inhibiting effect of I-phase formation on the plastic instability of the duplex structured Mg-8Li-6Zn-1.2Y (in wt.%) alloy31
Deformation mechanism, orientation evolution and mechanical properties of annealed cross-rolled Mg-Zn-Zr-Y-Gd sheet during tension31
Promoting dynamic recrystallization and improving strength and ductility of Mg–7Bi alloy through Al addition31
In situ growth process of Mg–Fe layered double hydroxide conversion film on MgCa alloy31
Microstructure, mechanical properties, and corrosion resistance of an explosively welded Mg–Al composite31
Improving hydrogen storage thermodynamics and kinetics of Ce-Mg-Ni-based alloy by mechanical milling with TiF331
Microstructure and mechanical properties of ultra-light Mg 8Li 3Al 2Zn 0.5Y alloy manufactured by directed energy deposition-Arc31
Improvement in electromagnetic shielding effectiveness and mechanical properties of ultrafine Mg98.5Zn0.5Y alloy via friction stir processing31
High formability Mg-Zn-Gd wire facilitates ACL reconstruction via its swift degradation to accelerate intra-tunnel endochondral ossification31
Grain boundary-mediated strain response mechanism of AZ31 gradient- structure Mg alloy plate under uniaxial tensile loading31
Kink-band formation in directionally solidified Mg/Mg2Yb and Mg/Mg2Ca eutectic alloys with Mg/Laves-phase lamellar microstructure31
Rolling texture development in a dual-phase Mg-Li alloy: The role of temperature30
Effect of air-formed film on corrosion behavior of magnesium-lithium alloys30
Grain refinement of Mg-Ca alloys by native MgO particles30
Negative thermal expansion and phase transition of low-temperature Mg2NiH430
Microstructure evolution and corrosion behavior of TIG welded joint of a new Mg Gd Nd Zn Zr alloy during post-weld heat treatment30
Dissociation of edge and screw pyramidal I and II dislocations in magnesium30
A comprehensive review on the processing-property relationships of laser strengthened magnesium30
Gadolinium-doped injectable magnesium-calcium phosphate bone cements for noninvasive visualization30
Simultaneous enhancement of mechanical properties and corrosion resistance of as-cast Mg-5Zn via microstructural modification by friction stir processing30
The effect of temperature on load partitioning evolution in magnesium metal matrix composite reinforced with Ti particles using in-situ synchrotron radiation diffraction experiments29
Towards tailoring basal texture of rolled Mg alloy sheet by recrystallization for high room-temperature formability: A review29
0.22631502151489