Computational Particle Mechanics

Papers
(The median citation count of Computational Particle Mechanics is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Evaluating DualSPHysics performance implemented in the study of heat transfer in multiphase systems with applications in nuclear reactors86
Grain size effect on the mechanical behavior of granite under cyclic loading and unloading: insights from the analysis of three-dimensional multilevel force chain network27
Modeling failure of hyperelastic solids interacting with fluids21
A total Lagrange meshless method for modeling the concrete damage evolutions under blast loading20
Numerical investigation of mixing and heat transfer of granular material in a ribbon reactor: effect of impeller speed and filling rate19
Calibration and testing of discrete element simulation parameters for spinach seeds19
Characterization and prediction of the effects of random factors on buffering efficiency in slope-cushion layer collisions through the discrete element method19
Key device design and experimental study of high-speed seedbed preparation for rice paddy sowing18
Evaluation of rock pillar failure mechanisms under uniaxial compression: impact of joint number and joint angle18
Numerical assessment of the rupture mechanisms in Brazilian test of brittle materials16
Effects of dual connected vertical plates on flow features of a single square cylinder16
Study on the unloading mechanism of layered rock slopes with weak interlayers during excavation based on the FDM-DEM method15
Mechanical properties and energy evolution of unconfined and CFRP-confined coal samples with different height-to-diameter ratios15
Morphological evolution of irregularly shaped Au nanoparticles during the sintering process and their mechanical performance14
Numerical simulations of flow characteristics of two side-by-side square cylinders with connected splitters14
Modelling the fracture behaviour of polycrystalline columnar ice using the grain-based discrete element method14
Experimental study on fractal characteristics of seepage-induced failure in granular soil13
Homotopy analysis on the bio-inspired radiative magnesium and iron oxides/blood nanofluid flow over an exponential stretching sheet13
Numerical modelling of particle entrainment in the wheel–rail interface13
On the sensitivity analysis of the DEM oedometer experiment13
A novel particle–particle and particle–wall collision model for superellipsoidal particles13
Discrete element model for cracking in defective ceramics under uniaxial compression13
A SPH-lattice spring method for modelling Fluid Structure Interaction involving composite body and free surface13
Microscopic mechanical analysis of K0 of granular soils with particle size distribution and rolling resistance effects13
Investigation of discharging flow behavior of powder in the conical feeding silo: effect of BINSERT-type aided flowing device12
Mesoscopic mechanics of triaxially compressed pebble assembly and estimation of Drucker–Prager parameters using discrete element method12
Correction: Magnetohydrodynamics combined convection modeling via LBM for shear thinning nanofluids within an inclined enclosure: appraisement of heat transfer and entropy under the impact of various 12
Deformation characteristics and layout optimization of roadway in complex jointed rock mass: a case study based on discrete element method11
Dynamic mechanical behavior of frozen soil using smoothed particle hydrodynamics11
Numerical study of rock bridge shape identification and rock bridge damage mechanism11
Determination of the influence of particle spatial distribution and interface heterogeneity on tensile fracture of ordinary refractory ceramics by applying discrete element modelling11
The influence of gravel-scale heterogeneity and scale effect on the mechanical properties of conglomerate10
Structural reconstruction and thermophysical properties of alumina agglomerate based on QSGS calculation10
Discrete element model for effective electrical conductivity of spark plasma sintered porous materials10
A simple and novel coupling method for CFD–DEM modeling with uniform kernel-based approximation10
Simulation of the compression of pellets out of filamentous microorganisms using DEM10
Numerical simulation of mechanical and fracture behavior of composite rock containing weak interlayers10
Intercepting and impact resistance property of dry particle flow by PFC3D-based slit dam9
Pull-out characteristics of rock bolts under the influence of “natural” coupled fractures9
A hybrid scaling coarse-graining method based on a computational fluid dynamics-discrete element method9
Study of penetration performance of embowed linear-shaped charge based on SPH method9
Hybrid Lattice-discrete element method for ballast modeling8
Packing simulation of thin flexible particles using a novel discrete element model8
Characterization of the ellipsoidal particle motion in a two-stage lifting pump using CFD-DEM method8
Impact dynamics and power-law scaling behavior of wet agglomerates8
Multiphase simulations of nonlinear fluids with SPH8
Predicting the rutting behaviour of asphalt concrete in the modified wheel tracking test using DEM and a cohesive viscoelastic–elastoplastic-damage contact model8
A high-resolution pseudo-polygon discrete element model for regional sea ice8
Explicit meshfree $${{\varvec{u}}}-{{\varvec{p}}}_\mathbf{\mathrm{w}}$$ solution of the dynamic Biot formulation at large strain8
On the sensitivity of DEM parameters on pile experiments8
Towards a novel solid constitutive model for simulating gelatin impacts as a bird strike surrogate8
Investigation of typical cavitation flow mode and flow field characteristics in a centrifugal pump8
Simulation of flow past a sphere on a rough bed using smoothed particle hydrodynamics (SPH)8
Modeling evaporation with a meshfree collocation approach7
Control mechanism of end-slope deformation in open pit mine based on discrete–continuous coupling method7
Variation characteristics analysis of sandstone strength parameters in discrete element method by using internal scale ratio7
Numerical investigation on cavitation characteristics under solid–liquid two-phase conditions in a centrifugal pump7
DPM model segregation validation and scaling effect in a rotary drum7
A particle-based parallel scheme for material point method (MPM) using message passing interface (MPI)7
The effects of smoothing length on the onset of wave breaking in smoothed particle hydrodynamics (SPH) simulations of highly directionally spread waves7
A DEM approach for simulating flexible beam elements with the Project Chrono core module in DualSPHysics7
Effects of soil arching on behavior of composite pile supporting foundation pit7
A calibration framework for DEM models based on the stress‒strain curve of uniaxial compressive tests by using the AEO algorithm and several calibration suggestions7
Analytical and numerical considerations of the minimum fluidization velocity of the molybdenite particles7
The use of 3D prints to assess the influence of shape on particle size distribution in the laser diffraction method7
Study on the destabilization and deformation breakage characteristics of the mine roof under repetitive mining of close coal seam group7
A comparative study of JKR and DMT contact models for the DEM simulation of powder spreading in additive manufacturing7
Peridynamic differential operator-based nonlocal numerical paradigm for a class of nonlinear differential equations7
Acoustic emission and breakage mechanism analysis on gypsum-filled granite specimens with varying notch dimensions under uniaxial compression testing6
Mechanical and damage properties study of rocks with different joint inclinations under seepage–stress coupling: insights based on energy theory6
An improved SPH-FEM coupling approach for modeling fluid–structure interaction problems6
Deep-learning-based parametric calibration of discrete element method for the breakage simulation of sea ice6
Analysis of FEM-SPH coupling for perforation penetration variation under different geology-engineering conditions6
A Lagrange multiplier-based coupling approach for the combined finite-discrete element method applicable to mechanical investigation of composite materials6
Coupling the discrete element method and solid state diffusion equations for modeling of metallic powders sintering6
Study on acoustic emission characteristics during shear deformation of rock structural planes based on particle flow code6
Simulation study on the two-phase unsaturated microscopic seepage based on digital core technology6
Modeling and mitigation of vortex formation in ejector deep hole drilling with smoothed particle hydrodynamics6
DEM study on threshing performance of “compression–oscillation” thresher6
Computational study on the effects of Brownian motion and thermophoresis on thermal performance of cross fluid with nanoparticles in the presence of Ohmic and viscous dissipation in chemically reactin6
3D DEM model simulation of asphalt mastics with sunflower oil6
A pair potential force model for surface tension calculations with smoothed particle hydrodynamics6
Discrete meta-analysis of slit dam intercepted particle flow based on PFC3D6
Calibrating microparameters of DEM models by using CEM, DE, EFO, MFO, SSO algorithms and the optimal hyperparameters6
Deformation features of high-pressure rotary pile reinforced strata by discrete lattice spring modeling (DLSM)6
Initial particle arrangement for the arbitrarily complex geometry of mesh-free methods6
Delay failure and fast fracturing of notched bedding rock under shear test condition: physical test and discrete element simulation5
Correction: Numerical simulation study on sand gravel layer collapse induced by tunnel lining damage5
Coupling of stabilized total Lagrangian and weakly compressible SPH models for challenging fluid–elastic structure interaction problems5
Solving nonlinear Fisher–Kolmogorov–Petrovsky–Piskunov equation using two meshless methods5
Study on mesoscopic mechanism of water inrush in foundation pit based on discrete element method5
Microscale study on dynamics of particles in slurry filtrated through porous media5
Mechanics and fracture behavior of rocks with triangular holes: experimental and numerical studies5
DEM meso-damage analysis for double-block ballastless track with non-coincident interlayer contact5
High compression of granular assemblies of brittle hollow tubular particles: investigation through a 3D discrete element model5
Implicit or explicit time integration schemes in the PFEM modeling of metal cutting processes5
Discrete element analysis of jointed rock mass impact on rigid baffle structure5
Coupled hygro-thermo-mechanical peridynamic model for concrete fracture analysis at high temperature5
Experimental and numerical studies of rock-like specimens with different hole shapes under compressive-shear loading5
Modelling of the moulding process of a granular-based vacuum gripper with DEM5
Implementation of improved spatial derivative discretization in DualSPHysics: simulation and convergence study5
Numerical analysis of liquid ring vacuum pump by the MPS method considering gas chamber effects and inflow/outflow of liquid and gas5
Analysis of factors influencing micro-scale double-bubbles collapse based on molecular dynamic simulation5
Study on micro-parameters of parallel bond model based on machine learning algorithm5
Motion and distribution of particles past multiple fixed cylinders with different arrangements in a confined moving bed5
Numerical study on shear behavior of backfill-rock rough interface considering 3D morphology of surrounding rock in a mining stope5
Numerical study on failure mechanism and acoustic emission characteristics of granite after thermal treatment4
Controlling the clustering behavior of particulate colloidal systems using alternating and rotating magnetic fields4
Comparative analysis of porosity coarse-graining techniques for discrete element simulations of dense particulate systems4
Simulating melt spreading into shallow water using moving particle hydrodynamics with turbulence model4
A nanoscale insight into the formation damage of carbonate reservoir due to water incompatibility during smart water injection: a molecular dynamics study4
An improved numerical scheme of DEFEM with distributed forces on the boundary of colliding particles4
Investigation of the ability of low-frequency acoustic energy for polishing of the CK60 steel using a hybrid FE/BE/DEM approach4
Modeling and numerical research on powder paving process of nylon powder in selective laser sintering4
Modeling of the Split-Hopkinson-Pressure-Bar experiment with the explicit material point method4
Waterfall Algorithm as a tool of investigation the geometrical features of granular porous media4
Using lattice Boltzmann method to control entropy generation during conjugate heat transfer of power-law liquids with magnetic field and heat absorption/production4
The blocking efficiency of slag blocking wall of the waste slag yard based on PFC2D4
Simulation investigation of mechanical and failure characteristics of jointed rock with different shapes of joint asperities under compression loading4
Research on the velocity distribution law of the coke in the chute of blast furnace based on discrete element method4
Statistical analysis of three-dimensional run-up heights using Gaussian process emulator of particle method4
DEM analysis of friction of cylindrical pinewood pellets with corrugated steel silo walls4
Meshfree numerical procedure of Biot’s consolidation: a coupled smoothed particle hydrodynamics and peridynamics model4
Development and coupling of numerical techniques for modeling micromechanical discrete and continuous media using real particle morphologies4
Fully implicit discrete element method for granular column collapse4
Lethe-DEM: an open-source parallel discrete element solver with load balancing4
Numerical simulation of particle impact drilling (PID) systems: a one-way coupled approach4
A particle finite element method approach to model shear cutting of high-strength steel sheets3
Surface tension simulations with corrected ALE-ISPH and density-based shifting technique3
A corrected transport-velocity formulation for fluid and structural mechanics with SPH3
A computational and experimental approach to understanding material flow behavior during additive friction stir deposition (AFSD)3
Numerical studies of dynamic properties and cracking behavior of sandstone with randomly distributed flaws subjected to dynamic loading3
Establishment of a three-dimensional mathematical model of SLM process based on SPH method3
A unified and modular coupling of particle methods with fem for civil engineering problems3
Particle-scale kinematic model for the surface erosion of granular beds3
Four-dimensional lattice spring model for blasting vibration of tunnel surrounding rock3
Estimation of the effect of rotational speed on flow and mixing quality of particles with different shapes in a rotary drum3
Research on dynamic characteristics of granular flow based on the material point method3
Effect of artificial viscosity on shocked particle-laden flows for staggered grid Lagrangian methods3
Mechanism of manual tamping operation for ballast bed based on DEM–MBD coupling3
Effect of DEM inter-particle parameters on uniaxial loading modeling results3
Numerical and experimental analysis in the energy dissipation of additively-manufactured particle dampers based on complex power method3
Simulation of dense gas-particle flow using a USM-θ model, combined with a frictional stress model3
Thermal gradient in polymeric particles during the cold spray process3
Particle correlation and intermittency in simulated cosmic ray showers3
A moving least square immersed boundary method for SPH with thin-walled rigid structures3
Qualitative and quantitative analyses of particulate flows in rotating drums using a DEM-based approach3
Computational 3D-modeling and simulations of generalized heat transport enhancement in cross-fluids with multi-nanoscale particles using Galerkin finite element method3
An implicit material point method using a cell-based integration scheme for large deformation static problems3
Meso-scale characterization and discrete element simulation of fiber-reinforced resin-mineral composite3
Analysis of the influence of vibration frequency and amplitude on ballast bed tamping operation in railway turnout areas3
Experimental and simulation study on failure mechanical characteristics of jointed underground roadway3
Applying surface tension as pressure boundary condition in free surface flow analysis by moving particle simulation method3
A coupled SPH–DEM model for erosion process of solid surface by abrasive water-jet impact3
Recurrent neural network model of density relaxation in monodisperse granular systems3
The analysis of mixing performance of sand and gravel in a rotating drum by DEM3
Quantitative analysis of grain size effect on tensile mechanical behavior of granite based on multi-level force chain networks3
Numerical investigation of particle migration in fault zones during water and mud inrush using the CFD‒DEM approach3
Fracturing responses, mechanical behaviors and anchoring effects for rough layered rock mass3
Mesoscopic damage mechanism of multiple freeze–thaw cycles of cement gravel based on particle flow theory2
Computational analysis of thermo-mechanical characteristics in refill FSSW of thin AA7075-T6 sheets using smoothed-particle hydrodynamics2
Entropy production in the swirling flow of viscous nanofluid over a stretching cylinder embedded in a porous medium2
Numerical study on the effect of grain size on rock dynamic tensile properties using PFC-GBM2
The comprehensive molecular dynamics study of amorphization process evolution inside ∑3, ∑9, and ∑19 structures of nanometric silicon Bi-crystal2
Phase field model of tunnel excavation damage zone2
Modeling neck evolution and shrinkage during sintering of Astaloy® 85 Mo2
Correction to: Modeling evaporation with a meshfree collocation approach2
Mechanical characteristics and crack propagation mechanism in rectangular and trapezoidal specimens of excavated pillars with various cavities: experimental and numerical investigations2
Numerical investigation of collision characteristics of non-spherical particles on ductile surfaces under normal impact2
Discussion on the influence of internal components on the flow field distribution of a new gas–solid non-catalytic fluidized bed (NRFB)2
Numerical simulation of the collapse of a bidispersed granular column using DEM and elastoplastic SPH2
A corrected WCSPH scheme with improved interface treatments for the viscous/viscoelastic two-phase flows2
Two criteria for effective improvement depth of sand foundation under dynamic compaction using discrete element method2
Influence of defect hole location on acoustic emission characteristics and damage evolution of rocks: a numerical study based on particle flow code2
Swimming of gyrotactic micro-organisms within the Williamson blood nano fluid model and solar mimetic system over the peristaltic arterial wall2
Fractal study of fracture permeability characteristics in porous media based on rough capillary bundle model and stress effect2
A review of smoothed particle hydrodynamics2
The effect of particle size on the reflux performance of the lifting pumps2
Using a modified MPS gradient model to improve accuracy of SPH method for Poisson equations2
Mechanical properties and damage evolution characteristics of composite rock mass with prefabricated fractures2
Shear mechanical properties of aggregate cemented materials: a numerical study based on a particle flow modeling strategy2
Retraction Note: Molecular dynamics performance for coronavirus simulation by C, N, O, and S atoms implementation dreiding force field: drug delivery atomic interaction in contact with metallic Fe, Al2
Nonlinear finite element modeling of reinforced concrete beam–column joints retrofitted using various plates configurations of carbon fiber-reinforced polymers2
Cross-interface propagation behavior of tension cracks during Brazilian experiments of coal–concrete bi-materials with different cementation strengths2
Semi-empirical model for abrasive particle velocity prediction in abrasive waterjet based on momentum transfer efficiency2
Cattaneo–Christov heat-mass transfer rheology in third-grade nanoliquid flow confined by stretchable surface subjected to mixed convection2
Numerical simulation on the effect of particle shape on mechanical response of proppants in horizontal fractures2
Optimization and experiment of seed-filling performance of the air-suction densely planted seed-metering device based on DEM2
Influence of loose gangue thickness on top coal recovery ratio in extrathick coal seam in longwall top coal caving2
A physically consistent particle method for high-viscous free-surface flow calculation2
Mathematical modelling of modified hybrid nanofluid in a peristaltic diverging tube with MHD and convective boundary conditions2
Theoretical investigation and key caving technology development at the end area of longwall top coal caving (LTCC) panels2
The role of randomly packed particles on macroscopic elastic bonded grain properties2
System-dependent behaviors of nanofluids for heat transfer: a particle-resolved computational study2
Simulation of surface deposits of micron sand particles in the internal cooling duct with a Gaussian probability density model2
SPH numerical simulation of snow drift movement with complex particle size2
Material interface modeling by the enriched RKPM with stabilized nodal integration2
Mechanical properties and damage evolution mechanisms of filled cracked red sandstone2
Comparison of Eulerian and Lagrangian approaches for the numerical study of the concentration of micro-particles generated from a moving train2
Comment on the paper “computational 3D-modeling and simulations of generalized heat transport enhancement in cross-fluids with multi-nanoscale particles using galerkin finite element method, Abdulaziz2
The effect of particle shape on the dynamics of spherical projectile impacting into granular media2
An explicit incompressible scheme based on the MPS method to simulate slump flow2
Identical calibration approach in discrete element method for modeling mechanical properties in fiber- and particle-reinforced composites2
Calibration method for discrete element modeling of ballast particles2
Direct numerical simulation of atomization by jet impact using moving particle semi-implicit method with GPU acceleration2
Poly-superquadric model for DEM simulations of asymmetrically shaped particles2
XAI hybrid multi-staged algorithm for routine & quantum boosted oncological medical imaging2
Correction to: Application of hourglass control to Eulerian smoothed particle hydrodynamics2
Fracture analysis employing equivalent domain integral method and nodal integration techniques based on reproducing kernel particle method2
Dynamic mechanical response characteristics and cracking behavior of randomly distributed cracked sandstone2
Large deformation and brittle failure calculated using the dual-domain material point method1
Numerical simulation of the meso-mechanical properties of double cruciform fissures rocks after freeze–thaw cycles1
Calibration of corn kernel simulation parameters during harvest and evaluation of its adaptability1
Simulating breakage tests using the discrete element method with polyhedral particles1
Effect of particle size ratio and fines content on drained/undrained behavior of binary granular soil according to confining pressure and packing density: a DEM simulation1
DEM simulation on the AE characteristics and mechanical behaviour of soft-hard composite rock-like materials with parallel fissures subjected to uniaxial compression1
Large deformation assessment of the bearing capacity factor for rigid footing: effect of soil heterogeneity1
An ordinary state-based peridynamic computational investigation of fiber-reinforced composites1
The virtual stress boundary method to impose nonconforming Neumann boundary conditions in the material point method1
An upwind generalized finite difference method (GFDM) for meshless analysis of heat and mass transfer in porous media1
Triaxial numerical simulation study on the mechanical properties of rockfill materials under different boundary conditions1
Insights into the compressive and tensile strengths of viscocohesive–frictional particle agglomerates1
Numerical analysis on the impact response of stone masonry arches with a GPGPU-parallelised FDEM1
Mechanical response and AE characteristics of heterogeneous rock under dynamic compression tests based on moment tensor analysis1
A mathematical framework for the analysis and comparison of contact detection methods for ellipses and ellipsoids1
Experimental and DEM analysis of granite multi-angle centrally single-cracked Brazilian disks (CSCBD) fracture behaviors1
Reduction of fluid forces for flow past side-by-side cylinders using downstream attached splitter plates1
Numerical study on the strength and fracture of rock materials with multiple rough preexisting fissures under uniaxial compression using particle flow code1
Mechanical behavior analysis of enhanced railway sleepers for small radius curves1
Numerical simulation of sloshing in the propellant tank of reusable rocket vehicle using meshfree method1
A volume-adaptive mesh-free model for FSI Simulation of cavitation erosion with bubble collapse1
An improved 3D multi-sphere DE-FE contact algorithm for interactions between an off-road pneumatic tire and irregular gravel terrain1
Numerical investigation on the mechanical and stress characteristics of rock containing a spherical defect under uniaxial compression1
Dynamic stability model and analysis of mechanical properties for railway operations1
Interaction analysis of subway construction and groundwater seepage in spring area using PD-FVM coupling method1
Study of the shear-band evolution across the interface between different spatial scales1
SPH 3D simulation of jet break-up driven by external vibrations1
Moving intruder out of noncohesive and cohesive granular assemblies1
Based on multi-level force chain network analysis: investigation on the mineral volume proportion effect of granite subjected to uniaxial compression1
Inflow and outflow numerical simulation using least-square moving particle semi-implicit method on GPU1
A DEM-based framework to optimize the gradation of concrete aggregate using fractal approach1
Computational analysis of multiphase flow of non-Newtonian fluid through inclined channel: heat transfer analysis with perturbation method1
Analysis of crack propagation and hydraulic fracturing behavior of coral reef limestone1
Sphericity and roundness for three-dimensional high explosive particles by computational geometry1
Constrained particle dynamics1
Discrete element model for general polyhedra1
Nitsche-based material point method for large deformation frictional contact problems1
Coupled elasto-softening contact models in DEM to predict the in-plane response of masonry walls1
Chaotic advection of fluid particles at different Reynolds numbers by two-dimensional smoothed particle hydrodynamics1
Contribution of detonation gas to fracturing reach in rock blasting: insights from the combined finite-discrete element method1
0.06187891960144