OOIR: Observatory of International Research

Papers

(The median citation count of Progress in Orthodontics is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)

Article	Citations
Clinical evaluation of marketed and non-marketed orthodontic products: are researchers now ahead of the times? A meta-epidemiological study	83
Accuracy of deep learning-based integrated tooth models by merging intraoral scans and CBCT scans for 3D evaluation of root position during orthodontic treatment	59
The effect of micro-osteoperforations on the rate of maxillary incisors' retraction in orthodontic space closure: a randomized controlled clinical trial	55
Evaluation of interproximal reduction in individual teeth, and full arch assessment in clear aligner therapy: digital planning versus 3D model analysis after reduction	47
Digital setup accuracy for moderate crowding correction with fixed orthodontic appliances: a prospective study	45
The association between self-esteem and aesthetic component of smile among adolescents	43
Εffect of cleansers on the composition and mechanical properties of orthodontic aligners in vitro	41
Three-dimensional oropharyngeal airway changes after facemask therapy using low-dose computed tomography: a clinical trial with a retrospectively collected control group	37
Long-term skeletal and dentoalveolar effects of hybrid rapid maxillary expansion and facemask treatment in growing skeletal Class III patients: a retrospective follow-up study	36
Midpalatal suture bone repair after miniscrew-assisted rapid palatal expansion in adults	35
Torque movement of the upper anterior teeth using a clear aligner in cases of extraction: a finite element study	34
Effective contribution ratio of the molar during sequential distalization using clear aligners and micro-implant anchorage: a finite element study	31
The relationship between different levels of facial attractiveness and malocclusion perception: an eye tracking and survey study	30
The effect of maxillary molar distalization with clear aligner: a 4D finite-element study with staging simulation	29
Three-dimensional finite element analysis of maxillary molar distalization treated with clear aligners combined with different traction methods	29
Surface wear of attachments in patients during clear aligner therapy: a prospective clinical study	27
Effects of IPR by mechanical oscillating strips system on biological structures: a quantitative and qualitative evaluation	26
Correction to: Classification of cervical vertebral maturation stages with machine learning models: leveraging datasets with high inter- and intra-observer agreement	25
3D comparative analysis of designed versus achieved maxillary teeth movements and influencing factors following first premolar extraction with invisalign: a new digital root model	25
Comparison of the effects on facial soft tissues produced by rapid and slow maxillary expansion using stereophotogrammetry: a randomized clinical trial	25
Classification of cervical vertebral maturation stages with machine learning models: leveraging datasets with high inter- and intra-observer agreement	25
Orthodontically induced root resorption in endodontically treated and vital teeth: a cone beam computer tomographic study	24
Are orthodontic randomised controlled trials justified with a citation of an appropriate systematic review?	23
Adolescents’ adherence to intraoral removable appliances: a scoping review	23
Biomechanical analysis of total arch maxillary distalization using infrazygomatic crest miniscrews: a finite element analysis study	23

Accuracy of 3D facial scans: a comparison of three different scanning system in an in vivo study	23
Biomechanical analysis of clear aligners for mandibular anterior teeth intrusion and its clinical application in the design of new aligner attachment	22
A novel machine-learning-based model for prediction of open gingival embrasures between mandibular central incisors after clear aligners treatment: a retrospective cohort study	22
Correction to: Curve of Spee modification in different vertical skeletal patterns after clear aligner therapy: a 3D set-up retrospective study	21
Angiotensin(1-7) attenuates tooth movement and regulates alveolar bone response during orthodontic force application in experimental animal model	21
Accurate gingival segmentation from 3D images with artificial intelligence: an animal pilot study	20
Age-stratified assessment of orthodontic tooth movement outcomes with clear aligners	19
Role of mechano-sensitive non-coding RNAs in bone remodeling of orthodontic tooth movement: recent advances	19
Integrated bioinformatic analysis of protein landscape in gingival crevicular fluid unveils sequential bioprocess in orthodontic tooth movement	18
External root resorption (ERR) and rapid maxillary expansion (RME) at post-retention stage: a comparison between tooth-borne and bone-borne RME	16
Comparison of AI-assisted cephalometric analysis and orthodontist-performed digital tracing analysis	16
Mechanosensor YAP mediates bone remodeling via NF-κB p65 induced osteoclastogenesis during orthodontic tooth movement	16
Global survey to assess preferences when attending virtual orthodontic learning sessions: optimising uptake from virtual lectures	16
Incisor irregularity and dental arch dimensions changes in subjects with different severity of anterior crowding: a 37-year follow-up	16
Mechanisms of primary failure of eruption: a new model of multidimensional framework	15
The microbiome alterations of supragingival plaque among adolescents using clear aligners: a metagenomic sequencing analysis	15
Different biomechanical effects of clear aligners in bimaxillary space closure under two strong anchorages: finite element analysis	15
Correction: Exploring the impact of orthodontic appliances on the oral microbiome and inflammatory parameters	14
The impact of the loss of first permanent molars on the duration of treatment in patients treated with orthodontic space closure and without skeletal anchorage	14
Correction to: Stability of transverse dental arch dimension with passive self-ligating brackets: a 6-year follow-up study	14
Static and dynamic mechanical properties of 3D-printed clear resin with embedded orthodontic metal wire	13
Skeletal versus conventional anchorage in dentofacial orthopedics: an international modified Delphi consensus study	13
Permanent first molar eruption failure in children: leading signs for early diagnosis	13
Three-dimensional assessment of airway volumes in patients with unilateral cleft lip and palate	13
Evaluating the efficiency of mandibular molar protraction using Herbst appliances versus temporary anchorage devices: a retrospective case-controlled study	13
Predictability of orthodontic tooth movement with aligners: effect of treatment design	13
Correction to: Skeletal versus conventional anchorage in dentofacial orthopedics: an international modified Delphi consensus study	13
The effect of space arrangement between anterior teeth on their retraction with clear aligners in first premolar extraction treatment: a finite element study	12
Stability of transverse dental arch dimension with passive self-ligating brackets: a 6-year follow-up study	12
Predictability of crowding resolution in clear aligner treatment	12
Effects of fasudil on glial cell activation induced by tooth movement	12
Breaking a dogma: orthodontic tooth movement alters systemic immunity	12
Extracellular vesicles derived from M1 macrophages enhance rat midpalatal suture expansion by promoting initial bone turnover and inflammation	12
Bionic effects of nano hydroxyapatite dentifrice on demineralised surface of enamel post orthodontic debonding: in-vivo split mouth study	12
Patient experiences and discomfort associated with mid-palatal temporary skeletal anchorage devices	11
Mapping an intelligent algorithm for predicting female adolescents’ cervical vertebrae maturation stage with high recall and accuracy	11
Parathyroid hormone promotes maxillary expansion and reduces relapse in the repeated activation maxillary expansion rat model by regulating Wnt/β-catenin pathway	11
Evaluation of the use of a clinical practice guideline for external apical root resorption among orthodontists	11
Accuracy of the digital workflow for guided insertion of orthodontic palatal TADs: a step-by-step 3D analysis	11
Polymerization kinetics of 3D-printed orthodontic aligners under different UV post-curing conditions	11
Influence of maxillary molar distalization with clear aligners on three-dimensional direction: molar distal movement, intrusion, distal tip and crown buccal torque	10
Comparison of the effects of different rapid maxillary expansion techniques on craniofacial structures: a finite element analysis study	10
Perceptions and utilization of tele-orthodontics: a survey of the members of the American Association of Orthodontists	10
Long-term evaluation of factors affecting removal torque of microimplants	10
Correction to: Effect of anti-sclerostin antibody on orthodontic tooth movement in ovariectomized rats	10
Ridge mini-implants, a versatile biomechanical anchorage device whose success is significantly enhanced by splinting: a clinical report	10
Clear aligner therapy practices among orthodontists practicing in Canada	9
Forces and moments generated by 3D direct printed clear aligners of varying labial and lingual thicknesses during lingual movement of maxillary central incisor: an in vitro study	9
“Dear Doctor, greetings of the day!”: A 1-year observational study of presumed predatory journal invitations	9
Improvement of osseointegration of Ti–6Al–4V ELI alloy orthodontic mini-screws through anodization, cyclic pre-calcification, and heat treatments	9

A randomized controlled trial to evaluate the effectiveness of different methods on pain management during orthodontic debonding	9
Predictability of lower incisor tip using clear aligner therapy	8
Effectiveness of clear aligners in achieving proclination and intrusion of incisors among Class II division 2 patients: a multivariate analysis	8
Incisor position objective for favorable profile in orthodontic camouflage treatment of skeletal class II cases	8
NAD+/Nrf2 signaling promotes osteogenesis by regulating oxidative level of BMSCs under mechanical stress	8
Assessment of the efficacy of various maxillary molar intrusion therapies: a systematic review	8
Stress distribution and displacement in the maxillofacial complex during intrusion and distalization of the maxillary arch using miniplates versus mini-implants: a 3-dimensional finite element study	8
Curve of Spee modification in different vertical skeletal patterns after clear aligner therapy: a 3D set-up retrospective study	8
A retrospective comparison of two protocols for correction of skeletal Class III malocclusion in prepubertal children: hybrid hyrax expander with mandibular miniplates and rapid maxillary expansion wi	7
Exploring the impact of orthodontic appliances on the oral microbiome and inflammatory parameters	7
Estimating and comparing the duration of adolescent growth peak in skeletal class I and III subjects using cervical vertebral maturation method	7
Mini-implant assisted rapid palatal expansion (MARPE) effects on adult obstructive sleep apnea (OSA) and quality of life: a multi-center prospective controlled trial	7
Correlation between dental arch form and OSA severity in adult patients: an observational study	7
Evaluation of different methods of correcting deep bite in adult and adolescent patients: a systematic review and meta-analysis	7
Spontaneous changes in mandibular incisor crowding from mixed to permanent dentition: a systematic review	7
Biomechanical effects of attachment designs in maxillary first molar mesialization with clear aligners: a finite element study	7
Accuracy evaluation of orthodontic movements with aligners: a prospective observational study	7
Comparison of the accuracy of bracket positioning between direct and digital indirect bonding techniques in the maxillary arch: a three-dimensional study	6
The transparency of reporting 'harms' encountered with the surgically assisted acceleration of orthodontic tooth movement in the published randomized controlled trials: a meta-epidemiological study	6
Long-term bone remodeling of maxillary anterior teeth with post-treatment alveolar bone defect in adult patients with maxillary protrusion: a prospective follow-up study	6
Mechanical force increases tooth movement and promotes remodeling of alveolar bone defects augmented with bovine bone mineral	6
KAT6A/YAP/TEAD4 pathway modulates osteoclastogenesis by regulating the RANKL/OPG ratio on the compression side during orthodontic tooth movement	6
Aging changes in maxillary anterior teeth in untreated individuals: an observational longitudinal study	6
Correction to: Predictability of orthodontic tooth movement with aligners: effect of treatment design	6
The effect of enhanced structure in the posterior segment of clear aligners during anterior retraction: a three-dimensional finite element and experimental model analysis	6
A two-year comparative assessment of retention of arch width increases between modified vacuum-formed and Hawley retainers: a multi-center randomized clinical trial	6
Skeletal stability of inter-molar mandibular distraction osteogenesis in growing patients	6
Precision wings treating skeletal class II in growing patients: a systematic review and meta-analysis	6
New aesthetic in-house 3D-printed brackets: proof of concept and fundamental mechanical properties	6
MTH herbst appliance, class II elastics and Paolone-Kaitsas functional appliance in mixed dentition class II patients: a retrospective cohort study	6
Treatment of impacted or retained second molars with the miniscrew-supported pole technique: a prospective follow-up study	5
Morphofunctional changes following adenotonsillectomy of obstructive sleep apnea children: a case series analysis	5
Impact of molar teeth distalization by clear aligners on temporomandibular joint: a three-dimensional study	5
Impact of the prefabricated forms of NiTi archwires on orthodontic forces delivered to the mandibular dental arch	5
Influence of elastomeric and steel ligatures on periodontal health during fixed appliance orthodontic treatment: a systematic review and meta-analysis	5
Factors influencing root resorption in retained mandibular second deciduous molars with congenital absence of second premolars: a cross-sectional study	5
Dentofacial effects of miniscrew-anchored maxillary protraction on prepubertal children with maxillary deficiency: a randomized controlled trial	5
Compressive force-induced succinate production via metabolic reprogramming in periodontal ligament cells promotes orthodontic tooth movement	5
Obstructive sleep apnea: What is an orthodontist’s role?	5
Fluorescence-aided removal of orthodontic composites: an in vivo comparative study	5
Seeking orderness out of the orderless movements: an up-to-date review of the biomechanics in clear aligners	5
Prediction of bone recovery after iatrogenic dehiscences/fenestrations caused by lingual bonded retainers: a clinical report	5