OOIR: Observatory of International Research

Papers

(The median citation count of Energy Technology is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-06-01 to 2026-06-01.)

Article	Citations
Lithium Fluoride Assisted Preparation of High‐Performance All‐Inorganic CsPbI₃ Perovskite Solar Cells	177
Performance Analysis of Cement Plant Waste‐Heat Recovery for Power Generation Based on Partial Evaporating Cycle with Ejector	119
Simulative Investigation of Optimal Multiparameterized Cooling Plate Topologies for Different Battery System Configurations	114
Synthesis of a Novel Ag/Co–B/CTAB Catalyst via Chemical Reaction at Room Temperature for Hydrolysis of Ammonia Borane	106
Nucleotide‐Based Carbon Dot‐Assisted Synthesis of High Surface Area Porous α‐Ni(OH)₂ as an Efficient Battery‐Type Supercapacitor Electrode	93
Implementing Substrate Treatments to Enhance Adhesion and Facilitate Cyrene as an NMP Alternative for Sustainable Printed Nickel–Manganese–Cobalt‐Based Battery Cathodes	85
Novel Core–Shell‐Structured Zeolitic Imidazolate Framework (ZIF)‐90@ZIF‐67 Applied for High‐Performance All‐Solid‐State Asymmetric Supercapacitor	76
Modeling of Carbon Black Fragmentation During High‐Intensity Dry Mixing Using the Population Balance Equation and the Discrete Element Method	72
A Novel and Highly Efficient Indolyl‐Based Electrolyte for Mg Batteries	67
Electrochemical Properties for Hydrogen Production of Nitrogen‐Doped Sponge‐Like Carbon Nanotubes as High‐Surface Area Catalyst	65
Construction of Functional Carbon Nanoarchitectonics for Mitigating Shuttle and Boosting Conversion of Polysulfides in Lithium–Sulfur Batteries	63
Metal‐Organic Framework/Graphene Nanoplatelet Composite Increases Rate Performance of Lithium–Sulfur Batteries	59
A High‐Performance and Fast‐Charging Rechargeable Iron‐Ion Battery Using V₂O₅ Porous Microspheres Cathode	57
External Short Circuit of Lithium‐Ion Battery After Low Temperature Aging	55
Unifying Absorber Doping and Interface Engineering for Barium‐Doped All‐Inorganic Perovskite Solar Cells for BIPV Applications	55
Hindered Phase Transition Kinetics of α‐CsPbI₃ by External Tension	52
Ionic Liquid‐Supported Single‐Sodium‐Ion‐Conducting Styrene‐Maleic Anhydride Copolymer for Energy Storage Devices	51
Application of Electrochemical Impedance Spectroscopy in Sn Anode and Lithium Nickel Manganese Oxide Cathode: Understanding the State of Charge and Health of Lithium Ion Battery as a Function of Tempe	49
Tailored Digitalization in Electrode Manufacturing: The Backbone of Smart Lithium‐Ion Battery Cell Production	47
Controlling Nucleation and Crystal Growth Orientation via Intermediate Ion‐Complex Formation for Efficient α‐FA_0.95Cs_0.05PbI₃ Perovskite Solar Cells	47
Investigation of the Effects of Cohydrothermal Carbonization on the Physicochemical Characteristics and Combustion Behavior of Straw Hydrochars	45
Highly Efficient 3D Evaporator for Interfacial Solar Steam Generation and Wastewater Treatment	42
Counter Electrodes Based on Polyaniline/carbon Nanotube/CuxS Nanocomposites for CdS Quantum Dots‐Sensitized Solar Cells	41
1D‐Photonic Crystals Enabling Selective Chromaticity for Colored Perovskite Solar Cells	41
Challenges in Laboratory Catalytic Testing for Ammonia Decomposition under Industrially Relevant Conditions	41

Recent Research Advances in Ruthenium‐Based Electrocatalysts for Water Electrolysis Across the pH‐Universal Conditions	40
Improvement of Performance of Cu ₂ ZnSn(S,Se) ₄ Solar Cells by Adding SiN	40
Effects of Hydrogen Blending Ratio and Fuel Axial Staged Ratio on Methane–Hydrogen Fuel Mixture Combustion Characteristics and NO _x	39
A Review on Data‐Driven‐Based Remaining Useful Life Prediction Methods for Proton Exchange Membrane Fuel Cells	39
Mechanical Structuring of Lithium‐Ion Battery Electrodes Using an Embossing Roller	39
Preparing Li₆V₃(PO₄)₅ Cathode with Boron‐Doped Carbon Layer as a Cathode Material for Lithium‐Ion Batteries	39
Water‐Based Process to the Preparation of Crack‐Free Thick Films of Li‐Rich‐Layered Oxide Cathode for High‐Performance Pouch Cells	38
Power Losses in Energy Generation: Mechanisms, Mitigation Strategies, and Pathways to a Sustainable Future	37
Multifunctional Characteristics of Sm ³⁺ ‐Modified Li ₄ Ti ₅	37
Deep Q‐Network Algorithm‐Based Optimal Energy Management Strategy of Fuel Cell Bus Considering Intelligent Network Information	36
Triboelectric–Electromagnetic Hybrid Energy Nanogenerator with Variable‐Frequency Effect Inspired by Magnetic Gears for Efficient Use of Low‐Speed Flow Energy	36
Quasi‐2D Ruddlesden–Popper Oxides LaSrCu _0.5 Mn _0.5 O ₄	35
Improved Cycling Stability of Layered Ni‐Rich Oxide Cathodes by Lithium Reactive Coating Layer via Atomic Layer Deposition	35
Electrospun Zinc–Titanium Dioxide Ceramic Nanofibers: Photocatalytic Dye Degradation, Catalytic Methanolysis of Sodium Borohydride, and Antibacterial Performance	35
Study on the Effect of Oxygen Enrichment Ratio on Combustion and Emission in Ammonia–Hydrogen Engine	34
Revisiting Electrocatalytic CO₂ Reduction in Nonaqueous Media: Promoting CO₂ Recycling in Organic Molecules by Controlling H₂ Evolution	33
Effect of Laser Energy Density on Photophysical and Photocatalytic Properties of BiVO₄ Single‐Crystal Thin Film	33
Upcycling Expired Silicone Sealants into High‐Performance Triboelectric Nanogenerators for Sustainable Energy Harvesting and Smart Infrastructure Safety Systems	33
Advancements in Back Contact Materials for CdTe Solar Cells	32
Quantum Chemical Modeling Approach Toward Phenothiazine‐Based DyeSensitized Solar Cells: Role of Tetracene and Pentacene π ‐Spacers in Photovoltaic and E	32
Interplay of Particle Size and Facet Engineering in Cu Nanocatalysts for Enhanced CO ₂ Reduction in Static System	32
Sustainable Battery Design: Holistic Recyclable Lithium‐Ion Battery System for Automotive and Following 2nd Life Stationary Use	32
Controlling Product Distribution of CO₂ Reduction on CuO‐Based Gas Diffusion Electrodes by Manipulating Back Pressure	31
Recent Advances in Multifunctional Photothermal Materials for Solar‐Driven Steam and Energy Generation	30
Pressure Fluctuations in Dead‐End PEMFCs: Current Density Dynamics Mechanism, Quantitative Response, and Asymmetric Pressure Optimization	30
Eco‐Friendly Polyethylene Oxide/Aluminum Oxyhydroxide Nanocomposites for Flexible Energy Storage Devices	30
Optimizing the Efficiency of Lead‐Free Cs₂TiI₆‐Based Double Halide Perovskite Solar Cells Using SCAPS‐1D	30
Zinc Cobalt Sulfide/Reduced Graphene Oxide Nanocomposite for High‐Performance Asymmetric Supercapacitor: A Microwave‐Assisted Synthesis	30
Triboelectric Nanogenerator‐Enabled 3D Microporous Polydimethylsiloxane–Graphene Oxide Nanocomposite for Flexible Self‐Powered Humidity Sensing Applications	30
Optimizing Methanol Reforming Parameters for Enhanced Hydrogen Selectivity in an Aspen Hysys Simulator using Response Surface Methodology	30
Insights into the Application of 2D Phosphorene in Dye‐Sensitized Solar Cells	30
	29
	29
Waste‐Derived Activated Carbon for Supercapacitors: Current Trends and Future Prospects	29
	29
A Facile Approach to Efficiently Load and Isolate CoN Active Sites for the Preparation of a High‐Performance Co–N–C Oxygen Reduction Catalyst	29
N‐Doped Carbon Nanofibers and Carbon Nanotubes‐Encapsulated CoNi Alloy as Highly Active Oxygen Reduction Catalysts for Direct Methanol Fuel Cells	28
Controlling Oxygen Reduction Reaction Activities of Ag@Pt Core–Shell Nanoparticles Via Tuning of Ag in the Surface Layer	28
In situ Preparation of SiO_x/Carbon Nanotube Composite Films with Excellent Mechanical and Electrochemical Properties as an Anode Material for Lithium‐Ion Batteries	28
Masthead	27
Enhanced Oxygen Evolution Reaction Catalytic Properties of Novel Nanowire Structures from FeCo‐MOFs/GO via Low‐Temperature Annealing	27
Masthead	27
Cover Picture	26
Parametric Analysis of Dual‐Path Thermal Management in Hybrid Battery Thermal Management System Using Layered Metal Foam	26
Towards Sustainable, Competitive Production of Large‐Format Battery Cells	26
Synergistic Integration of P2/O3 Phases for Developing High‐Performance Sodium‐Ion Battery Cathodes	26
Numerical Simulation Analysis of Hot Roller Pressing for NCM622 Cathode Electrode Sheet Based on Discrete Element Method	25
Design of Inorganic–Organic Hydrophobic Coating on Zn Anode Realizes Highly Reversible and Dendrite‐Free Zn‐Ion Batteries	25
Prediction of Screen‐Printed Electrodes with Fine‐Line and Arbitrary Structures	25
Reactive Ion Etching Activating TiO₂ Substrate for Planar Heterojunction Sb₂S₃ Solar Cells with 6.06% Efficiency	25

CoNiSe₂ Nanoparticles Embedded in Pod‐Like N‐Doped Carbon Nanofibers for High‐Performance Sodium‐Ion Batteries	25
(Electro)Chemical Processes of Poly(Ethylene Oxide)‐Based Electrolyte on Cu Surface during Lithium Secondary Battery Operation	25
A Low‐Cost Ni–Mo Electrocatalyst for Highly Efficient Hydrogen and Oxygen Evolution Reaction	25
The Hierarchical Structures of Co₃S₄ Hollow Nanotube Arrays Wrapped with NiCo‐Layered Double Hydroxide Nanosheets for High‐Performance Asymmetric Supercapacitors	25
Highly Adaptive Flame‐Retardant Electrolyte Endows Hard‐Carbon Anodes with Stable Interface Structure for High‐Safety Sodium‐Ion Batteries	25
Metal‐Free Organic Dyes for NiO‐Based Dye‐Sensitized Solar Cells: Recent Developments and Future Perspectives	25
Introducing Spectrophotometry for Quality Control in Lithium‐Ion‐Battery Electrode Manufacturing	24
Study on the Performance of Aqueous Aluminum‐Ion Battery with Al[TFSI] ₃ Electrolyte	24
Modeling of the Residence Time Distribution in a Continuous Electrode Slurry Mixing Process in Battery Cell Production	24
Phenethylammonium Iodide Passivation Layers for Flexible Planar Perovskite Solar Cells	24
Advances in Cooling Technologies for Electric Vehicle Drive Motors, Reducers, and Inverters: A Comprehensive Review	24
Comparative Evaluation of Graphite Anode Structuring for Lithium‐Ion Batteries Using Laser Ablation and Mechanical Embossing	24
Study on the Triple‐Phase Boundary Structure in Porous Electrode via the CO Pulse‐Titration Method	24
State of Health Estimation for Lithium‐Ion Batteries Based on Savitzky–Golay Filter‐Crested Porcupine Optimizer‐Support Vector Machine	24
Development of a Tool for Sizing and Technical–Financial Analysis of Energy‐Storage Systems Using Batteries	24
A Facile Approach to Develop Polyvinyl Alcohol‐Based Bio‐Triboelectric Nanogenerator Containing Graphene‐ Doped Zinc Oxide Quantum Dots	24
Challenges and Future Perspectives on Production, Storage Technologies, and Transportation of Hydrogen: A Review	23
Simulation and Performance Evaluation of a Hemispherical Solar Still Using Comsol Multiphysics	23
Chemical Thermal Runaway Modeling of Lithium‐Ion Batteries for Prediction of Heat and Gas Generation	23
Underwater High‐Voltage Electric Pulse‐Assisted Hydraulic Fracturing: Multiphysics Modeling Framework and 3D Dynamic Crack Propagation Analysis	23
From Acoustic to Electric: Advanced Triboelectric Nanogenerators with Fe‐Based Metal–Organic Frameworks	23
Performance Improvement of Dye‐Sensitized Solar Cells Using Ferrite‐TiO ₂ Magnetic Nanocomposites	22
Prediction of CO–NO_xEmissions from a Natural Gas Power Plant Using Proper Machine Learning Models	22
Hydrogen Compatibility of Polymers for Fuel Cell Vehicles	22
Fusing Equivalent Circuit Models and Explainable Machine Learning for Internal Short Circuit Diagnosis in Lithium‐Ion Batteries	22
Control Strategy Analysis of Vehicle Thermal Management System Based on Motor Heat Utilization	22
Study on the Thermal Response Characteristics of Liquid Hydrogen Tank	21
High‐Performance Flexible Piezo–Tribo Hybrid Nanogenerator Based on MoS₂@ZnO‐Assisted β‐Phase‐Stabilized Poly(Vinylidene Fluoride) Nanocomposite	21
Advances and Perspectives on Solid Oxide Fuel Cells: From Nanotechnology to Power Electronics Devices	21
Optimal Heat‐Up Planning of a Solid Oxide Fuel Cell with and without Hot Air Recycling by Considering Energy, Time, and Temperature Gradient	21
Fabrication and Properties of a Thermal Conduction‐Enhanced SiO ₂ –Ag Double‐Shell Nanoencapsulated Lauric Acid Phase Change Material	21
Tolerance of Silicon Oxide‐Coated Pt/C Catalyst Toward CO and H₂S Contamination in Hydrogen for Proton Exchange Membrane Fuel Cells	21
Optimal Strategies for Hybrid Battery‐Storage Systems Design	21
Issue Information	20
Exploring the Synergistic Potential of Bimetallic Sulfide (SrCuS) as Battery‐Grade Electrode Material for Hybrid Supercapacitor Applications	20
Photovoltaic Class‐E Inverter for Resonance Wireless Power Transfer for Electric Vehicle Charging Applications with Optimization Algorithms	20
Millivolt‐Level Stable Voltage Output of Triboelectric Nanogenerator Under Random Excitation by Double Limiting	20
Advancements in CdTe Thin‐Film Solar Cells: Is Doping an Effective Strategy for Performance Enhancement?	20
Boron Minerals with Different Crystal Structures as Performance Manipulators in Triboelectric Nanogenerators	20
Evaluation of Equivalent Dynamic Active Distribution Network Models with Individual and Aggregated Consideration of Grid Forming Converters	20
Masthead	20
A Hybrid Framework for Lithium‐Ion Battery State‐of‐Health Estimation via Dynamic Local–Global Feature Fusion	20
An Overview of Electron Transport Layer Materials and Structures for Efficient Organic Photovoltaic Cells	20
Recent Research Advancements in Carbon Fiber‐Based Anode Materials for Lithium‐Ion Batteries	20
Analysis of the Causes of Altered Coal Seam Permeability Based on On‐Site Directional Long‐Drill Hydraulic Fracturing Tests	20
Biowaste Sea Shells‐Based Triboelectric Nanogenerator: Sustainable Approach for Efficient Mechanical Energy Harvesting	20
Ag‐Decorated Reduced Graphene Oxide: An Electrocatalyst for Oxygen Reduction Reaction Applications in Alkaline Medium	19
	19
Fabrication of a Robust and Porous MnO₂ Electrode as the Cathode for High‐Performance Aqueous Zinc‐Ion Batteries	19
Numerical Investigation of Compressive Stress and Wettability Effects on Fluid Transport in Polymer Electrolyte Membrane Fuel Cell Porous Layers	19
Nile Red as a Fluorescence Marker and Antioxidant for Regenerative Fuels	19
Optimization of Phase Selection for CO ₂ Pipeline Transportation: Enhancing Energy Efficiency Across Temperature Variations	19
Rational Construction of CuO/CdS for Highly Selective CO₂ to CO Conversion with S‐Scheme Photocatalysts	19
Improved Backward Smoothing Square Root Cubature Kalman Filtering and Fractional Order—Battery Equivalent Modeling for Adaptive State of Charge Estimation of Lithium‐Ion Batteries in Electric Vehicles	19
Fe–Ni–Co Alloy Derived Ternary Disulfide for High‐Performance Thermal Battery	19
Physical and Chemical Surface Modification of Recycled Polystyrene Films for Improved Triboelectric Properties	19
Suppression of Mid‐Gap Trap State in CsPbBr₃ Nanocrystals with Br‐Passivation for Self‐Powered Photodetector	19
Estimation and Prediction of Lithium‐Ion Batteries Using a Hybrid Optimized Gaussian Process Regression and Long Short‐Term Memory Transformer	19
Issue Information	19
Metal–Organic Framework‐Derived SnS₂/C/CNT as Anode Material for Lithium‐Ion Batteries with High Capacity and Stability	19
Research on Multistate Variable Prediction of a Master‐Slave Electric‐Hydraulic Hybrid Vehicle Based on CNN‐LSTM Model with Attention Mechanism	19
Investigating the Impact of Hydrogen Bonding on Silicon Nitride (SiNx) Film	19
Numerical Simulation and Experimental Study on the Effect of Anode Pressure on the Performance of the Proton Exchange Membrane Fuel Cell with Dead‐Ended Anode	19
The Impact of Calendering Process Variables on the Impedance and Capacity Fade of Lithium‐Ion Cells: An Explainable Machine Learning Approach	18
Binder‐Free Synthesis of Mesoporous Nickel Tungstate for Aqueous Asymmetric Supercapacitor Applications: Effect of Film Thickness	18
Aluminum Steam Oxidation in the Framework of Long‐Term Energy Storage: Experimental Analysis of the Reaction Parameters Effect on Metal Conversion Rate	18
Unlocking the Potential of Emerging SrZrSe ₃ Solar Cells with Diverse Inorganic Metal Sulfide Hole Transport Layers	18
Progress and Complexities in Metal–Air Battery Technology	18
A Novel Self‐Reconfigurable Battery Pack Design with and without Active Cell Balancing	18
Study on the Catalytic Effect of Converter Dust on In Situ Online Reforming of Metallurgical By‐Product Gas and Thermochemical Energy Storage Analysis	18
Silicon Graphite Composite Anode Degradation: Effects of Silicon Ratio, Current Density, and Temperature	18
Impact of Grain Size and Grain Nature in Thin‐Film Solar Cells	18
Advancements in Triboelectric Nanogenerators for Harvesting Environmental Energy	18
Synergistic Regulation of Bimetallic Electronic Structure and Electrochemical Activation‐Driven Surface Reconstruction for Fabricating High‐Performance NiFe‐Based Alloy/Oxyhydroxide Electrocatalysts T	18
Mass‐Transfer Mechanism of Nafion Proton‐Exchange Membranes in Fuel Cells—A Review	18
Position‐ and Discharged Capacity‐Dependent Composition of Li _{2‐ X} O	18
Efficient Oxygen Evolution Reaction on Catalyst‐Free Acid‐Functionalized Plastic Chip Electrodes	18
The Metal–Organic Frameworks Derived Co₃O₄/TiO₂ Heterojunction as a High‐Efficiency Sulfur Carrier for Lithium–Sulfur Batteries	17
Two‐Step Dealloying Approach to Synthesize Hierarchically Porous Nickel–Tin Alloy Toward Long‐Life Lithium‐Ion Batteries	17
Tunable Magnetoelectric Fluxguide Cancels Power Nulls in WPT Systems With Highly Misaligned Coils	17

Tungsten Oxytetrachloride as a Positive Electrode for Chloride‐Ion Batteries	17
Exploring the Structural Forms and Catalytic Potential of Carbon Nanomaterials in Metal–Air Batteries	17
Masthead	17
α‐Ga₂O₃@Chitosan‐Derived Carbon as High‐Performance Anode for Lithium‐Ion Batteries	17
Development of Eco‐Friendly Chitosan‐Dextran Polyblend Electrolyte for Enhanced Performance in Primary Magnesium Batteries	17
Evaluation of Lifetime Predictions for Future Hydrogen Pipelines by Different Fracture Mechanics‐Based Design Codes	17
A Review and Perspective on Path Dependency in Batteries	17
Interfacial Engineering and Defect Passivation for Highly Efficient Carbon‐Based Perovskite Solar Cells	17
Evaporation Properties of Water through Floating Porous Structures for Desalination	17
Expanding Layer Spacing of Carbon‐Coated Vanadium Oxide via Ammonium Ions for Fast Electrochemical Kinetics in Aqueous Zinc‐Ion Batteries	17
Operando Thermo‐Electrochemical Diagnostics with Au, TiO₂, and LiFePO₄ as Reference Electrodes in Li‐Ion Pouch Cells	17
Plug‐In Hybrid Electric Vehicle Energy Management with Clutch Engagement Control via Continuous‐Discrete Reinforcement Learning	17
	17
The High Anti‐CO Poisoning Anode Catalyst Based on Platinum–NbO_x Interaction for Proton Exchange Membrane Fuel Cell	17
High‐Performance Perovskite Solar Cells with Low Open‐Circuit Voltage Loss and Excellent Stability after p‐F‐PEAI Posttreatment	16
3D Printing of Monolithic Carbon Electrodes with Hierarchical Pores Enabled by Nucleated Resin	16
Dual‐Float‐Based Triboelectric Nanogenerator for Low‐Frequency Wave Energy Harvesting	16
Study of Budding Snubber Quality Deterioration in Solid Oxide Fuel Cell‐Fed Inverter Used in Microgrid Energy Conversion	16
	16
Predictive Modeling of Gradient Interfaces in Solid‐State Lithium Metal Batteries: A Multiscale Framework with Experimental Relevance	16
High Entropy Alloys: Emerging Materials for Advanced Hydrogen Storage	16
FlexTrail Printing as Direct Metallization with Low Silver Consumption for Silicon Heterojunction Solar Cells: Evaluation of Solar Cell and Module Performance	16
Flexible Nanocarbon Electrodes for Holistically Engineered Solar Cell and Battery Integrated Piezoresistive Sensor	16
Activated Carbon Nanofibers Derived from Thermally Rearranged Polyimides for Binder‐Free Supercapacitors	16
Characterization of Elasticity for Silicon‐Containing Anodes by Microindentation	16
Laser Etching Post‐Processing to Create Low‐Tortuosity Structured Electrodes for Advanced Sodium‐Ion Batteries	15
Thermodynamic Cooling Potential of Passive Radiative Cooling Based on Entropy Flux Analysis and Ideal Boundary Conditions	15
Energy Efficient Transshipment of Ammonia: A Numerical Study of Various Terminal Concepts	15
Boosting Photocatalytic Hydrogen Production over Mn_0.4Cd_0.6S/CuS p–n Heterojunction under Visible Light Irradiation	15
Selenization of NiCo₂S₄ Spinel Structure to Reduce the Charge Transfer Resistance for Supercapacitor Electrode	15
Prediction of Remaining Useful Life for Lithium‐Ion Batteries Using Complete Ensemble Empirical Mode Decomposition with Adaptive Noise for Feature Analysis, and Bidirectional Long Short‐Term Memory Co	15
Experimental Investigation of the Lithium Calendering Process for Direct Contact Prelithiation of Lithium‐Ion Batteries	15
Electrochemical Control of the Morphology and Functional Properties of Hierarchically Structured, Dendritic Cu Surfaces	15
Photovoltaic Enhancement Strategy of D‐π‐A Molecules in Printable Carbon‐Based Perovskite Solar Cells	15
Exploring the Impact of Ni Doping on Bagasse Biochar and Its Efficient Hydrogen Production via Assisted Water Electrolysis	15
Ce‐Doped MoO₃ Photocatalyst as an Environmental Purifier for Removal of Noxious Rhodamine B Organic Pollutant in Wastewater	15
Improved Back Surface Field with Optimized SiO ₂ /Poly‐Si Back Passivation Structure for Tunneling Oxide Passivated Contact Solar Cell	15
Influence of the Mixing and Dispersing Process on the Slurry Properties and the Microstructure and Performance of Ultrathick Cathodes for Lithium‐Ion Batteries	15
Cotton‐Based Metal–Air Batteries without Catalysts as Low‐Cost Micropower Devices	15
Damping Structured Triboelectric Nanogenerator for Stay Cables Vibration Energy Graded Harvesting	15
Issue Information	15
Magnetic Field Effects in 2D Manganese Ditelluride Supercapacitors	15
In Situ Growth of NiCo Layered Double Hydroxide on Biomass Waste‐Based Substrate: A Novel Material with 3D Interconnected Structure as Electrodes for Supercapacitors	15
Charge–Discharge Characteristics of Fe‐Doped NaMnO Cathodes with Na ₃ PO ₄ Aqueous Electrolytes:	15
Geometry‐Dependent Dynamic Impact Behavior of Lithium–Iron Phosphate Batteries at Different Velocities: An Experimental and Numerical Approach	15
Electrohydraulic Power Switching Control for Mechatronics–Electrohydraulic Power Coupling Electric Vehicles Considering Optimal Speed Thresholds	15
Effects of Composite Phase Change Material Thickness and Expanded Graphite Content on Lithium‐Ion Battery Thermal Management System	15
Review of Solar Greenhouse Drying Systems in Conjunction with Hybrid Technological Features, Designs, Operations, and Economic Implications for Agro‐Food Product Processing Application	15
Comparative Analysis of Charging Protocol for Degradation Reduction and Remaining‐Useful‐Life Enhancement of a Lithium‐Ion Battery	15
Enhancing Thermal Energy Storage: Investigating the Use of Graphene Nanoplatelets in Phase Change Materials for Sustainable Applications	14
Synergistic Effect of Particle Size and In‐Situ Surface Coating on the Electrochemical Performance of Lithium Nickel Manganese Oxide Cathode	14
Revealing Kinetics Process of Fast Charge‐Storage Behavior Associated with Potential in 2D Polyaniline	14
Kirigami‐Based Flexible, High‐Performance Piezoelectric/Triboelectric Hybrid Nanogenerator for Mechanical Energy Harvesting and Multifunctional Self‐Powered Sensing	14
Experimental Study on the Impact of Simulated Pitch Motion on Power Output of Floating Photovoltaic Systems	14
Evaluation of Equivalent Dynamic Active Distribution Network Models with Individual and Aggregated Consideration of Grid Forming Converters	14
Review on Synthesis Methods of Carbon Nanotubes as Activated Carbon Composites Based on Biomass for Supercapacitors in Electric Vehicles	14
Process Engineering Analysis of Transport Options for Green Hydrogen and Green Hydrogen Derivatives	14
	14
Phase‐Pure Iron Pyrite Nanocrystals as Air‐Stable Hole‐Transport Materials for Low‐Cost Perovskite Solar Cells	14
Discerning the Role of A‐Site Cation on the Efficiency and Stability of the Halide Perovskite Solid‐State Supercapacitor	14
Thermal Performance Analysis of Hybrid Nanofluids in a Rectangular Multichannel Microchannel Heat Sink with External Cylindrical Inserts in a Cylindrical Enclosure	14
Flow Field Analysis and Performance Study of a Hydrogen Circulation Pump for Proton Exchange Membrane Fuel Cell Vehicles with Different Working Clearances	14
Modeling and Model Predictive Control of a Battery Thermal Management System Based on Thermoelectric Cooling for Electric Vehicles	14
Optimizing Battery Thermal Management: Enhanced Thermal Performance for Nano‐Enhanced Phase Change Material Using Diverse Fin Configurations	14
	14
A Novel Phase Change Absorbent for CO₂ Capture with Low Viscosity and Effective Absorption–Desorption Properties	14
Enhanced Adsorption and Conversion of Polysulfides by ZIF‐67‐Based Co₃O₄/TiO₂ Heterostructure and Attached Polypyrrole 3D Conductive Network for Lithium–Sulfur Batteri	14
CsPbBr ₃ Quantum Dots Incorporation as a Strategy to Mitigate Surface and Grain Boundary Defects in FAPbI ₃	14
Synthesis and Characterization of Erythritol‐Based Nanoencapsulated Phase‐Change Materials for High‐Temperature Latent Functional Thermal Fluid	14
Cover Picture	13
Kalman Filter Tuning for State Estimation of Lithium‐Ion Batteries by Multi‐Objective Optimization via Hyperspace Exploration	13
Inhomogeneous Aging in Lithium‐Ion Batteries Caused by Temperature Effects	13
Numerical Simulation Analysis of Heat Transfer Enhancement With Multitype Twisted Strips Inserted	13
Strain Relaxation Characterization on Lithium‐ion Batteries at Different States of Charge and Charging Rates	13
Transition‐Metal‐Doped TiO₂ Nanorods with High‐Visible‐Light Response via a Simple Hydrothermal Method	13
Compact Layer‐Free Perovskite Solar Cells with Low‐Temperature UVO Photochemical Annealed Mesoporous TiO₂ Layers	13
Ink Processing and its Influence on Particle Size Distribution, Ionomer Requirements and Electrode Properties in Polymer Electrolyte Membrane Fuel Cell and Electrolyzer Catalyst Coated Membranes	13
Thermodynamics and Exergy Analysis on the Oxyfuel Combustion Integrated with Supercritical CO₂ Power Cycle System	13
High‐Hydrophilic NiCoFe–OH Accelerates Charge Interfacial Transfer and Enhances Photoelectrochemical Properties of α‐Fe₂O₃	13
Highly Permeable Bucky Paper for the Gas Diffusion Layer of Fuel Cell Prepared by a Whole‐Process Solid Template Method	13
An Electrical Analogy Model for Thermoelectric Generator under Natural Convection Conditions by Considering Nonlinear Heat Transfer with Ambient Environment	13
Metal–Organic Framework‐Derived Carbon Materials Loading on Polydopamine‐Modified Polyurethane Foam for Interfacial Solar Steam Generation and Seawater Desalination	13
Fabrication of Symmetric Polyaniline/Nano‐Titanium Dioxide/Activated Carbon Supercapacitor Device in Different Electrolytic Mediums: Role of High Surface Area of Carbon and Facile Interactions with Na	13
A Novel Framework Interweaving in Mesoporous AlPO₄ and Its Function in CO₂ Decomposition	13
Static Reconfiguration of Modular Thermoelectric Generation Arrays under Nonuniform Temperature Distribution	13
Study on Microcapsules with Chitosan‐Based Polyurethane/SiO ₂ Composite Shells for Encapsulating Phase Change Material	13
Cover Picture	13
Effect of Solder Flux on Resistive Solder Bond Hotspot Generation in Photovoltaic Module Circuit Process and Restoration of Hotspot Module	13
Thermokinetic and Ballistic Property Studies of Azide‐Based Airbag Gas Generants with Dual Oxidizers (Sr(NO₃)₂ and KNO₃)	13
Optimization of Isochronous Motion Characteristics and Output Power Parameters for Gamma‐Type Stirling Engine Based on Response Surface and Grey Relational Analysis	13
Smart Railway Transportation: Self‐Powered and Self‐Sensing Vibration Energy Harvester	13
Nonthermal Plasma‐Modified Carbon‐Carrying Sn‐Based Ternary Nanocatalyst for High‐Performance Direct Dimethyl Ether Fuel Cells	13
High‐Performance Thermochromic VO₂‐Based Coatings Deposited by Roll‐to‐Roll High‐Power Impulse Magnetron Sputtering	13
Progress in Sodium Silicates for All‐Solid‐State Sodium Batteries—a Review	13
A Scalable and Controllable Li‐Powder‐Coating Prelithiation Method Toward Ultralong‐life and High‐Energy‐Density LiFePO₄ Battery	13