Biomass Conversion and Biorefinery

Article	Citations
Optimization of cardanol oil dielectric-activated EDM process parameters in machining of silicon steel	92
Mechanical, tribology, dielectric, thermal conductivity, and water absorption behaviour of Caryota urens woven fibre-reinforced coconut husk biochar toughened wood-plastic composite	81
A review on electrical and gas-sensing properties of reduced graphene oxide-metal oxide nanocomposites	79
Effect of acid catalysts on hydrothermal carbonization of Malaysian oil palm residues (leaves, fronds, and shells) for hydrochar production	78
Recovery and recycling of deep eutectic solvents in biomass conversions: a review	73
Phytofabrication of zinc oxide nanoparticles with advanced characterization and its antioxidant, anticancer, and antimicrobial activity against pathogenic microorganisms	73
Annealed peanut shell biochar as potential reinforcement for aloe vera fiber-epoxy biocomposite: mechanical, thermal conductivity, and dielectric properties	69
Variation of Ba concentrations in some plants grown in Pakistan depending on traffic density	67
A review on organosolv pretreatment of softwood with a focus on enzymatic hydrolysis of cellulose	64
Effect of cashew shell biomass synthesized cardanol oil green compatibilizer on flexibility, barrier, thermal, and wettability of PLA/PBAT biocomposite films	64
Comprehensive review on agricultural waste utilization and high-temperature fermentation and composting	63
Effect of silane-grafted orange peel biochar and areca fibre on mechanical, thermal conductivity and dielectric properties of epoxy resin composites	62
A comprehensive review of characterization, pretreatment and its applications on different lignocellulosic biomass for bioethanol production	61
Mechanical, wear, and fatigue behavior of alkali-silane-treated areca fiber, RHA biochar, and cardanol oil-toughened epoxy biocomposite	59
Statistical modeling of phenolic compounds adsorption onto low-cost adsorbent prepared from aloe vera leaves wastes using CCD-RSM optimization: effect of parameters, isotherm, and kinetic studies	56
Conversion of methane to methanol: technologies and future challenges	56
A review on biohydrogen production through photo-fermentation of lignocellulosic biomass	56
Slaughterhouse and poultry wastes: management practices, feedstocks for renewable energy production, and recovery of value added products	52
Removal of Rhodamine B from aqueous solution by stalk corn activated carbon: adsorption and kinetic study	52
A review of the traditional pulping methods and the recent improvements in the pulping processes	50
Synthesis of activated carbon from Lemna minor plant and magnetized with iron (III) oxide magnetic nanoparticles and its application in removal of Ciprofloxacin	49
Green biosynthesis of zinc and selenium oxide nanoparticles using callus extract of Ziziphus spina-christi: characterization, antimicrobial, and antioxidant activity	48
Ball milling as an important pretreatment technique in lignocellulose biorefineries: a review	47
Multifunctional properties of silver and gold nanoparticles synthesis by Fusarium pseudonygamai	46
Anaerobic digestion of dairy wastewater: effect of different parameters and co-digestion options—a review	46

In vitro improvement and rooting of banana plantlets using antifungal nanocomposite based on myco-synthesized copper oxide nanoparticles and starch	43
Effects of pyrolysis temperature on production and physicochemical characterization of biochar derived from coconut fiber biomass through slow pyrolysis process	42
Natural antimicrobial and antioxidant compounds for active food packaging applications	42
Green biosynthesis of titanium dioxide quantum dots using watermelon peel waste: antimicrobial, antioxidant, and anticancer activities	42
Conversion of crop, weed and tree biomass into biochar for heavy metal removal and wastewater treatment	41
Developments in smart organic coatings for anticorrosion applications: a review	40
Acid hydrolysis optimization of pomegranate peels waste using response surface methodology for ethanol production	40
Microfibrillated cellulose from pine cone: extraction, properties, and characterization	40
A review on catalytic pyrolysis for high-quality bio-oil production from biomass	39
Biopolymer starch-gelatin embedded with silver nanoparticle–based hydrogel composites for antibacterial application	39
Pseudo-first kinetics model of copper doping on the structural, magnetic, and photocatalytic activity of magnesium oxide nanoparticles for energy application	38
Zero-valent iron supported-lemon derived biochar for ultra-fast adsorption of methylene blue	38
Synthesis of polyamide grafted on biosupport as polymeric adsorbents for the removal of dye and metal ions	38
Detailed analysis on sterculia foetida kernel oil as renewable fuel in compression ignition engine	37
Optimization of guar gum galactomannan sulfation process with sulfamic acid	36
Macroalgae-derived biohydrogen production: biorefinery and circular bioeconomy	36
Optimized removal process and tailored adsorption mechanism of crystal violet and methylene blue dyes by activated carbon derived from mixed orange peel and watermelon rind using microwave-induced ZnC	35
Critical review of biochar applications in geoengineering infrastructure: moving beyond agricultural and environmental perspectives	35
Utilization of prepared activated biochar from water lily (Nymphaea lotus) stem for adsorption of malachite green dye from aqueous solution	35
Effect of alkali treatment on novel natural fiber extracted from Himalayacalamus falconeri culms for polymer composite applications	35
Adsorption potential of biochar obtained from pyrolysis of raw and torrefied Acacia nilotica towards removal of methylene blue dye from synthetic wastewater	35
Effect of sugarcane bagasse and alumina reinforcements on physical, mechanical, and thermal characteristics of epoxy composites using artificial neural networks and response surface methodology	34
Structural characterization of n-hexadecanoic acid from the leaves of Ipomoea eriocarpa and its antioxidant and antibacterial activities	34
Description of the component properties of species of bamboo: a review	34
Dual biogas and biochar production from rice straw biomass: a techno-economic and sustainable development approach	34
Developing biochar-based slow-release N-P-K fertilizer for controlled nutrient release and its impact on soil health and yield	33
Multivariable optimization with desirability function for carbon porosity and methylene blue adsorption by watermelon rind activated carbon prepared by microwave assisted H3PO4	33
Recent trends and future perspectives of lignocellulose biomass for biofuel production: a comprehensive review	33
Poly-gamma-glutamic acid biopolymer: a sleeping giant with diverse applications and unique opportunities for commercialization	33
Effectiveness of silicon nanoparticles on the mechanical, wear, and physical characteristics of PALF/sisal fiber–based polymer hybrid nanocomposites	33
In vitro antioxidant activities of copper mixed oxide (CuO/Cu2O) nanoparticles produced from the leaves of Phoenix dactylifera L	32
Development of a magnetic orange seed/Fe3O4 composite for the removal of methylene blue and crystal violet from aqueous media	32
Restoration of critical dielectric properties of waste/aged transformer oil using biodegradable biopolymer-activated clay composite for power and distribution transformers	32
Regeneration and reusability of non-conventional low-cost adsorbents to remove dyes from wastewaters in multiple consecutive adsorption–desorption cycles: a review	32
Application of green and red local soils as a catalyst for catalytic ozonation of fulvic acid: experimental parameters and kinetic	32
Valorization of tomato pomace: extraction of value-added components by deep eutectic solvents and their application in the formulation of cosmetic emulsions	32
A critical review on biogas production from edible and non-edible oil cakes	32
Integrated biorefineries, circular bio-economy, and valorization of organic waste streams with respect to bio-products	32
Bio-based materials for barrier coatings on paper packaging	32
Experimental study of formaldehyde and BTEX adsorption onto activated carbon from lignocellulosic biomass	32
Effective utilization of waste sugarcane bagasse filler-reinforced glass fibre epoxy composites on its mechanical properties - waste to sustainable production	31
Bioremediation of hexavalent chromium-contaminated wastewater by Bacillus thuringiensis and Staphylococcus capitis isolated from tannery sediment	31
Comparison of ABTS, DPPH, permanganate, and methylene blue assays for determining antioxidant potential of successive extracts from pomegranate and guava residues	31
Lignocellulosic ethanol production from cotton stalk: an overview on pretreatment, saccharification and fermentation methods for improved bioconversion process	31
Corncob bio-waste and boron nitride particles reinforced epoxy-based composites for lightweight applications: fabrication and characterization	31
Development and evaluation of biochar-based secondary and micronutrient enriched slow release nano-fertilizer for reduced nutrient losses	30
Antimicrobial and anticancer activities of biosynthesized bimetallic silver-zinc oxide nanoparticles (Ag-ZnO NPs) using pomegranate peel extract	30
Improved degradation of metronidazole in a heterogeneous photo-Fenton oxidation system with PAC/Fe3O4 magnetic catalyst: biodegradability, catalyst specifications, process optimization, and degradatio	30
Preparation and characterization of biomass briquettes made from banana peels, sugarcane bagasse, coconut shells and rattan waste	30
Characterization, bioenergy value, and thermal stability of biochars derived from diverse agriculture and forestry lignocellulosic wastes	29

Isolation and characterization of cellulose nanocrystals from amla (Phyllanthus emblica) pomace	29
Novel plantain peel activated carbon–supported zinc oxide nanocomposites (PPAC-ZnO-NC) for adsorption of chloroquine synthetic pharmaceutical used for COVID-19 treatment	28
Waste to resource recovery: mesoporous adsorbent from orange peel for the removal of trypan blue dye from aqueous solution	28
Plant-based synthesis of Ag-doped ZnO/MgO nanocomposites using Caccinia macranthera extract and evaluation of their photocatalytic activity, cytotoxicity, and potential application as a novel sensor f	27
Application of design of experiments (DoE) for optimised production of micro- and mesoporous Norway spruce bark activated carbons	27
Analysis of operational issues in hydrothermal liquefaction and supercritical water gasification processes: a review	27
Evaluation of the adsorptive removal of cationic dyes by greening biochar derived from agricultural bio-waste of rice husk	27
Cashew nut shell liquid as alternate fuel for CI engine—optimization approach for performance improvement	26
Bioremoval of rhodamine B dye from aqueous solution by using agricultural solid waste (almond shell): experimental and DFT modeling studies	26
Biotechnological advances in biomass pretreatment for bio-renewable production through nanotechnological intervention	26
Characterization of raw and alkali-treated cellulosic fibers extracted from Borassus flabellifer L.	26
Kinetic analysis and thermal degradation study on wheat straw and its biochar from vacuum pyrolysis under non-isothermal condition	26
Effect of heating rate on the pyrolysis of camel manure	26
Clean recovery of phenolic compounds, pyro-gasification thermokinetics, and bioenergy potential of spent agro-industrial bio-wastes	26
Isolation and characterization of novel micro cellulose from Azadirachta indica A. Juss agro-industrial residual waste oil cake for futuristic applications	26
Green synthesis of CuFe2O4 nanoparticles from bioresource extracts and their applications in different areas: a review	26
Waste Musa acuminata residue as a potential biosorbent for the removal of hexavalent chromium from synthetic wastewater	26
Catalysts and their role in biomass gasification and tar abetment: a review	26
Investigation of the adsorption performance of cationic and anionic dyes using hydrochared waste human hair	26
Adsorption of methylene blue (MB) dye on ozone, purified and sonicated sawdust biochars	25
The use of biochar-NH2 produced from watermelon peels as a natural adsorbent for the removal of Cu(II) ion from water	25
Synthesis and characterization of lightweight unmanned aerial vehicle composite building material for defense application	25
Evaluation of orange and potato peels as an energy source: a comprehensive study on their pyrolysis characteristics and kinetics	25
Pistachio (Pistacia vera) waste as adsorbent for wastewater treatment: a review	25
Development of environmental friendly biocomposites using domestic discarded wastes as potential fibre and filler	25
Biochar development from thermal TGA studies of individual food waste vegetables and their blended systems	25
Green synthesis of ZnO NPs using Pontederia crassipes leaf extract: characterization, their adsorption behavior and anti-cancer property	25
Grape pomace powder valorization: a novel ingredient to improve the nutritional quality of gluten-free muffins	25
A successful biorefinery approach of macroalgal biomass as a promising sustainable source to produce bioactive nutraceutical and biodiesel	24
Modeling and optimization of the adsorptive removal of crystal violet dye by durian (Durio zibethinus) seeds powder: insight into kinetic, isotherm, thermodynamic, and adsorption mechanism	24
Photocatalytic activity of iron oxide nanoparticles synthesized by different plant extracts for the degradation of diazo dyes Evans blue and Congo red	24
Physicochemical modification of chitosan adsorbent: a perspective	24
Banana fiber and particle-reinforced epoxy biocomposites: mechanical, water absorption, and thermal properties investigation	24
Cellulosic-derived bioethanol from Limnocharis flava utilizing alkaline pretreatment	24
Mechanical, thermal and morphological analysis of hybrid natural and glass fiber-reinforced hybrid resin nanocomposites	24
Photosynthetic microalgae–based carbon sequestration and generation of biomass in biorefinery approach for renewable biofuels for a cleaner environment	24
Biochar-SO prepared from pea peels by dehydration with sulfuric acid improves the adsorption of Cr6+ from water	24
An overview of biodegradable poly (lactic acid) production from fermentative lactic acid for biomedical and bioplastic applications	24
Adsorptive decolouration of anionic dye from water by goat dropping activated carbon prepared via microwave-assisted H3PO4 activation: process optimization using response surface methodology, isotherm	23
Production of polyhydroxybutyrate (PHB) by a novel Klebsiella pneumoniae strain using low-cost media from fruit peel residues	23
Biotechnological applications of sugarcane bagasse and sugar beet molasses	23
Biogas production from anaerobic co-digestion using kitchen waste and poultry manure as substrate—part 1: substrate ratio and effect of temperature	23
Effect of grid pattern and infill ratio on mechanical, wear, fatigue and hydrophobic behaviour of abaca bracts biocarbon-ABS biocomposites tailored using 3D printing	23
Sustainability and application of corncob-derived biochar for removal of fluoroquinolones	23
Efficiency of eggshell as a low-cost adsorbent for removal of cadmium: kinetic and isotherm studies	23
Magnetized chitosan nanocomposite as an effective adsorbent for the removal of methylene blue and malachite green dyes	23
Preparation and characterization of microcrystalline cellulose from olive stones	23
Biosynthesis of Ag-ZnO/rGO nanocomposites mediated Ceratophyllum demersum L. leaf extract for photocatalytic degradation of Rhodamine B under visible light	23
Fabrication of polyaniline-coated porous and fibrous nanocomposite with granular morphology using tea waste carbon for effective removal of rhodamine B dye from water samples	23
Utilization of coconut shell biomass residue to develop sustainable biocomposites and characterize the physical, mechanical, thermal, and water absorption properties	23
The synthesis of biochar-supported nano zero-valent iron composite and its adsorption performance in removal of malachite green	23
Banana biofiber and glass fiber reinforced hybrid composite for lightweight structural applications: mechanical, thermal, and microstructural characterization	23
Standardization of ultrasound-assisted extraction of bioactive compounds from kinnow mandarin peel	23
Hardwood spent mushroom substrate–based activated biochar as a sustainable bioresource for removal of emerging pollutants from wastewater	22
The large-scale period of atmospheric trace metal deposition to urban landscape trees as a biomonitor	22
Xylooligosaccharide production from sugarcane bagasse and leaf using Aspergillus versicolor endoxylanase and diluted acid	22
Fabrication of activated carbon electrodes derived from peanut shell for high-performance supercapacitors	22
Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites	22
Investigation of the effects of different slags as accelerant on anaerobic digestion and methane yield	22
Biomass as activated carbon precursor and potential in supercapacitor applications	22
Innovative biochar and organic manure co-composting technology for yield maximization in maize-black gram cropping system	22
Glycerol-based NaDES as green solvents for ultrasound-assisted extraction of phycocyanin from Arthrospira platensis—RSM optimization and ANN modelling	22
Utilization of banana waste as a resource material for biofuels and other value-added products	22
Applications of advanced oxidation processes (electro-Fenton and sono-electro-Fenton) for degradation of diazinon insecticide from aqueous solutions: optimization and modeling using RSM-CCD, influenci	22
Synthesis of Ag/Fe2O3 nanocomposite from essential oil of ginger via green method and its bactericidal activity	22
Biogenic synthesis of Bi2O3 nanoparticles using Cassia fistula plant pod extract for the effective degradation of organic dyes in aqueous medium	22
A step to shell biorefinery—Extraction of astaxanthin-rich oil, protein, chitin, and chitosan from shrimp processing waste	21
Biosynthesis and characterization of novel nanocomposite ZnO/BaMg2 efficiency for high-speed adsorption of AZO dye	21
A comprehensive review on application of plant-based bioadsorbents for Congo red removal	21
Utilization of sugarcane bagasse/ZnCl2 for sustainable production of microporous nano-activated carbons of type I for toxic Cr(VI) removal from aqueous environment	21
Biodiesel production from new algal sources using response surface methodology and microwave application	21
Co-hydrothermal valorization of food waste: process optimization, characterization, and water decolorization application	21
Effect of tamarind fruit fiber contribution in epoxy resin composites as biodegradable nature: characterization and property evaluation	21
Current status of xylanase for biofuel production: a review on classification and characterization	21
Biochar from lab-scale pyrolysis: influence of feedstock and operational temperature	21
Yeast and bacteria co-culture-based lipid production through bioremediation of palm oil mill effluent: a statistical optimization	21
A comprehensive review of the application of plasma gasification technology in circumventing the medical waste in a post-COVID-19 scenario	21
Synthesis and evaluation of activated carbon from rice husks for removal of humic acid from water	21
Evaluation of characteristic features of untreated and alkali-treated cellulosic plant fibers from Mucuna atropurpurea for polymer composite reinforcement	21
Agricultural Pea Waste as a Low-Cost Pollutant Biosorbent for Methylene Blue Removal: Adsorption Kinetics, Isotherm And Thermodynamic Studies	21

A review on direct carboxylation of glycerol waste to glycerol carbonate and its applications	21
Novel sesame oil cake biomass waste derived cellulose micro-fillers reinforced with basalt/banana fibre-based hybrid polymeric composite for lightweight applications	21
Recent advances in the production and value addition of selected hydrophobic analogs of biomass-derived 5-(hydroxymethyl)furfural	21
Thermal behavior and kinetic study on the co-pyrolysis of biomass with polymer waste	21
Development of ZnO/MOGAC nanocomposites for enhanced photocatalytic removal of PO43− and NO3- ions from wastewater under various light irradiations	21
Tree bark characterization envisioning an integrated use in a biorefinery	21
Extraction of novel biosilica from finger millet husk and its coconut rachilla-reinforced epoxy biocomposite: mechanical, thermal, and hydrophobic behaviour	20
Green synthesized ZnO nanoparticles by Saccharomyces cerevisiae and their antibacterial activity and photocatalytic degradation	20
Analysis of biofuel (briquette) production from forest biomass: a socioeconomic incentive towards deforestation	20
Dual biogas/biochar production from anaerobic co-digestion of petrochemical and domestic wastewater: a techno-economic and sustainable approach	20
Sustainable adsorption method for the remediation of malachite green dye using nutraceutical industrial fenugreek seed spent	20
Catalytic hydrothermal liquefaction of Spirulina platensis for biocrude production using Red mud	20
Biochar-based nanocomposites for industrial wastewater treatment via adsorption and photocatalytic degradation and the parameters affecting these processes	20
Grape stalk cellulose toughened plain weaved bamboo fiber-reinforced epoxy composite: load bearing and time-dependent behavior	20
Activated carbon derived from Azolla filiculoides fern: a high-adsorption-capacity adsorbent for residual ampicillin in pharmaceutical wastewater	20
Valorization of biomass-derived furfurals: reactivity patterns, synthetic strategies, and applications	20
Highly efficient treatment of petrochemical spent caustic effluent via electro-Fenton process for COD and TOC removal: optimization and experimental	20
Facile green synthesis of CuO- ZnO nanocomposites from Argyreia nervosa leaves extract for photocatalytic degradation of Rhodamine B dye	20
Amino acids, fatty acids, and peptides in microalgae biomass harvested from phycoremediation of swine wastewaters	20
Syngas generation for methanol synthesis: oxy-steam gasification route using agro-residue as fuel	20
Investigation of mechanical and dynamic mechanical analysis of bamboo/olive tree leaves powder-based hybrid composites under cryogenic conditions	20
Lignin waste processing into solid, liquid, and gaseous fuels: a comprehensive review	20
Dye removal using novel adsorbents synthesized from plastic waste and eggshell: mechanism, isotherms, kinetics, thermodynamics, regeneration, and water matrices	20
Preparation and characterization of hydrochar-derived activated carbon from glucose by hydrothermal carbonization	20
Adsorption of malachite green dye onto almond peel waste: a study focusing on application of the ANN approach for optimization of the effect of environmental parameters	20
Rice husk ash as green and sustainable biomass waste for construction and renewable energy applications: a review	20
Synthesis and characterization of randomly oriented silane-grafted novel bio-cellulosic fish tail palm fiber–reinforced vinyl ester composite	20
Production of first- and second-generation ethanol for use in alcohol-based hand sanitizers and disinfectants in India	19
Experimental analysis of higher alcohol–based ternary biodiesel blends in CI engine parameters through multivariate and desirability approaches	19
Anaerobic co-digestion of kitchen waste and animal manure: a review of operating parameters, inhibiting factors, and pretreatment with their impact on process performance	19
Pharmaceutical applications of lignin-derived chemicals and lignin-based materials: linking lignin source and processing with clinical indication	19
Role of metagenomics in prospecting novel endoglucanases, accentuating functional metagenomics approach in second-generation biofuel production: a review	19
Biosorption of Basic Red 46 using raw cactus fruit peels: equilibrium, kinetic and thermodynamic studies	19
Punica granatum peel extract mediated green synthesis of zinc oxide nanoparticles: structure and evaluation of their biological applications	19
Biochar production using biogas residue and their adsorption of ammonium nitrogen and chemical oxygen demand in wastewater	19
Visco-elastic properties and thermal analysis of corchorus/elastane yarn–reinforced biocomposites	19
Overview on agricultural potentials of biogas slurry (BGS): applications, challenges, and solutions	19
Xylitol and ethanol co-production from sugarcane bagasse and straw hemicellulosic hydrolysate supplemented with molasses	19
Copper and manganese bimetallic catalysts for oxidation of prot lignin: effects of metal oxide on product yield	19
Bioethanol production from pomegranate peel by simultaneous saccharification and fermentation process	19
Preparation of activated carbon from pine (Pinus radiata) sawdust by chemical activation with zinc chloride for wood dye adsorption	19
Optimizing the process parameters to maximize biogas yield from anaerobic co-digestion of alkali-treated corn stover and poultry manure using artificial neural network and response surface methodology	19
Experimental investigations on Palmyra sprout fiber and biosilica-toughened epoxy bio composite	19
Adsorption of methylene blue dye from aqueous solution onto synthesized bentonite/silvernanoparticles-alginate (Bent/AgNPs-Alg) bio-nanocomposite	19
Insights into adsorption of ammonium by biochar derived from low temperature pyrolysis of coffee husk	19
Simultaneous production of astaxanthin and lipids from Chlorella sorokiniana in the presence of reactive oxygen species: a biorefinery approach	19
Enhancing the efficiency of electrochemical, Fenton, and electro-Fenton processes using SS316 and SS316/β-PbO2 anodes to remove oxytetracycline antibiotic from aquatic environments	19
Influence of alkali-treated and raw Zanthoxylum acanthopodium fibers on the mechanical, water resistance, and morphological behavior of polymeric composites for lightweight applications	19
Ciprofloxacin adsorption using magnetic and ZnO nanoparticles supported activated carbon derived from Azolla filiculoides biomass	19
Enhancing the efficiency of some agricultural wastes as low-cost absorbents to remove textile dyes from their contaminated solutions	19
Extraction and characterization of novel biomass–based cellulosic plant fiber from Ficus benjamina L. stem for a potential polymeric composite reinforcement	19
Overview of banana cellulosic fibers: agro-biomass potential, fiber extraction, properties, and sustainable applications	19
Theoretical investigation of Darcy-Forchheimer flow of bioconvection Casson fluid in the presence of chemical reaction effect	19
Experimental investigations on the effect of palm oil in kenaf fibre–reinforced basalt particulate hybrid biocomposite	19
Role of sugarcane bagasse biogenic silica on cellulosic Opuntia dillenii fibre-reinforced epoxy resin biocomposite: mechanical, thermal and laminar shear strength properties	19
Developing biochar and organic nutrient packages/technology as soil policy for enhancing yield and nutrient uptake in maize-black gram cropping system to maintain soil health	18
Characterization and adsorption capacity of four low-cost adsorbents based on coconut, almond, walnut, and peanut shells for copper removal	18
Biogas production from anaerobic digestion of solid microalgae residues generated on different processes of microalgae-to-biofuel production	18
Biosorption of acid brown 14 dye to mandarin-CO-TETA derived from mandarin peels	18
Optimization of tensile strength of PLA/clay/rice husk composites using Box-Behnken design	18
Lignocellulose-derived monosugars: a review of biomass pre-treating techniques and post-methods to produce sustainable biohydrogen	18
Microalgae biomass pre-treatment with deep eutectic solvent to optimize lipid isolation in biodiesel production	18
Study of Annona squamosa as alternative green power fuel in diesel engine	18
Mechanical, morphological, and tribological characterization of novel walnut shell-reinforced polylactic acid-based biocomposites and prediction based on artificial neural network	18
Cheese whey utilization for biosurfactant production: evaluation of bioprocessing strategies using novel Lactobacillus strains	18
Ultrasound-assisted deep eutectic solvent–based extraction of phytochemicals from Mentha arvensis: optimization using Box-Behnken design	18
Utilization of tea wastes for the removal of toxic dyes from polluted water—a review	18
Optimizing the ultrasonic-assisted extraction of antioxidants from Ulva lactuca algal biomass using factorial design	18
Synthesis modified biochar-based slow-release nitrogen fertilizer increases nitrogen use efficiency and corn (Zea mays L.) growth	18
Bamboo for producing charcoal and biochar for versatile applications	18
Bio-hydrogen production through dark fermentation: an overview	18
Development of ternary models for prediction of biogas yield in a novel modular biodigester: a case of fuzzy Mamdani model (FMM), artificial neural network (ANN), and response surface methodology (RSM	18
Agro-industrial-residues as potting media: physicochemical and biological characters and their influence on plant growth	18
Soil hydro-physical properties affected by biomass-derived biochar and organic manure: a low-cost technology for managing acidic mountain sandy soils of north eastern region of India	18
Conversion of rice straw into 5-hydroxymethylfurfural: review and comparative process evaluation	18
A comprehensive review on advanced thermochemical processes for bio-hydrogen production via microwave and plasma technologies	18
Raw pomegranate peel as promise efficient biosorbent for the removal of Basic Red 46 dye: equilibrium, kinetic, and thermodynamic studies	18
The optimization of reactive black 5 dye removal in the sono-catalytic process combined with local yellow montmorillonite and hydrogen peroxide using response surface methodology from aqueous solution	18
Current progress in anaerobic digestion reactors and parameters optimization	18
Adsorption studies on the removal of malachite green by γ-Fe2O3/MWCNTs/Cellulose as an eco-friendly nanoadsorbent	18
Comprehensive characterization of novel Borassus flabellifer flower biomass based microcrystalline cellulose reinforced with polylactic acid (PLA) biofilm for futuristic applications	17
Biofuel production from novel Prunus domestica kernel oil: process optimization technique	17
Metal nanoparticle mixtures to improve the biogas yield of cattle manure	17
A novel way of converting waste-enriched composites to lightweight, biodegradable resources: a property analysis	17
Furfural production from sugarcane bagasse along with co-production of ethanol from furfural residues	17
Enhanced adsorption performance of tetracycline in aqueous solutions by KOH-modified peanut shell-derived biochar	17
A review on potential of biohydrogen generation through waste decomposition technologies	17
Optimization of hydrothermal liquefaction process through machine learning approach: process conditions and oil yield	17
Applications of chitin and chitosan as natural biopolymer: potential sources, pretreatments, and degradation pathways	17
Effect of cassava tuber nanocellulose and satin weaved bamboo fiber addition on mechanical, wear, hydrophobic, and thermal behavior of unsaturated polyester resin composites	17
Comparative life cycle assessment (LCA) of biofuel production via corn stover: fermentation to ethanol, pyrolysis to bio-oil, and gasification to jet fuel	17
A sustainable approach to valorize potato peel waste towards biofuel production	17
Pear cactus fiber with onion sheath biocarbon nanosheet toughened epoxy composite: mechanical, thermal, and electrical properties	17
Utilization of nano-biosorbents based on pine needles and banana peel for methylene blue removal: equilibrium, kinetics, thermodynamic study, and application	17
Theoretical analysis of the thermal characteristics of Ree–Eyring nanofluid flowing past a stretching sheet due to bioconvection	17