Biomass Conversion and Biorefinery

Papers
(The median citation count of Biomass Conversion and Biorefinery is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Moisture evolution, thermal properties and energy consumption of drying spent grain pellets from a blend of some cereals for small-scale bio-energy utilization: modelling and experimental study110
Proximate composition and fatty acid profile of Himantura marginata (Blackedge whipray) liver oil100
Leaf and shoot biomass and shoot growth of Rhododendron understory in Artvin, Turkey95
Experimental investigation on machining characteristics of minimum quantity lubrication grinding of AISI-4320 steel using finger millet husk biosilica nanofluid92
Increasing power generation and energy efficiency with modified anodes in algae-supported microbial fuel cells90
Production of polymeric silver nanocomposites using microbial extracellular polymers for the effective removal of chromium (VI) from water85
Study on the use of bioenzymes for pre-treatment to improve the refining performance of old corrugated container85
Removal of tetracycline with grape leaves–based biochar: adsorption properties and mechanism84
Production and characterization of bioethanol from spent Camellia sinensis leaves using heterogeneous nanocatalysts79
Biohydrogen production enhancement from organic solid waste using consecutive intermittent feeding strategies in a sequencing batch reactor77
Purification and characterization of metallothionein protein in marine catfish, Arius arius, on exposure to cadmium76
Processing of marine microalgae biomass via hydrothermal liquefaction for bio-oil production: study on algae cultivation, harvesting, and process parameters74
Plant microbial fuel cell performance assessment utilizing anode from Delonix regia fruit pod69
Elucidating the effect of stacking sequence on water absorption, flexural, and impact properties of banana pseudostem fiber–reinforced unsaturated polyester composites67
Fabrication of biogenic silver nanoparticles using Bacillus vietnamensis JA01: characterization and antibacterial activity65
From grass to lactic acid and energy: evaluating pretreatment techniques for enhanced biorefinery outputs63
Enzymatic hydrolysis of fermentable sugars prepared from bamboo by pretreatment with hot water and green liquor63
Analysis of chemical composition and biological efficiency of leaf essential oils isolated from seven species of Cinnamomum of the Western Ghats, India62
Valorization of lignocellulosic agave residues via pyrolysis and its use as adsorbent for methylene blue removal59
Investigation of selected functional properties of Grona trifloral biomass treated cotton fabric56
Optimizing process parameters in water- and acid-washing pretreatment of rice straw56
Physico-mechanical and thermal properties of fly ash and benzoylated Himalayan Agave fiber reinforced polyester composite55
Cost-effective 2,3-BD separation: insights from aqueous two-phase extraction-assisted distillation53
Thermoplastic composites reinforced chemically modified kenaf fibre: current progress on mechanical and dynamic mechanical properties53
A sustainable approach for tailoring coir-fibre based bio-adsorbent and its composite for industrial applications53
Novel Ficus retusa L. aerial root fiber: a sustainable alternative for synthetic fibres in polymer composites reinforcement52
Characterization of alkali-treated cellulosic fibers derived from Calamus tenuis canes as a potential reinforcement for polymer composites50
Sustainable utilization of Cobia fish (Rachycentron canadum) skin for leather production using chrome-free tanning49
Cr (VI) removal from aqueous solutions using Cordia Africana-based activated carbon/red clay/magnetite nanocomposite: optimization via one factor at a time and response surface methodology49
CCD-RSM optimization of CO2, nitrate, and nanoparticle levels for enhanced biomass, lipid, and carbohydrate yields in Chlorella pyrenoidosa49
Stable electrode material for use in supercapacitor with iodine doping after sulfonation of mesoporous activated carbon particles based on microalgae biomass48
Thermochemical conversion of lignocellulosic biomass for sustainable bioproducts47
Preliminary characterisation of the Thaumatococcus daniellii fruit as a potential biomass source for biorefinery47
Novel formulation of oleaster bark (Elaeagnus angustifolia) extract-oil-emulsion gel immobilized into coconut shell hydrochar47
Kinetic and thermodynamic studies of co-pyrolysis of babool sawdust blended with high-density polyethylene using model-free isoconversional methods45
Conversion of cellulose to highly aromatic hydrochar by catalytic hydrothermal carbonization: The role of lanthanide(III) ions45
Polyethyleneimine/oxidized alginate hydrogels: A sustainable approach for anionic dye removal44
Bamboo-derived biochars: physicochemical properties and implications for soil fertility and sustainability44
Construction of Fe3O4/MoS2-O/biochar heterostructure with visible light-driven photodegradation of levofloxacin and sterilization activity: efficiency, reaction pathway, and mechanism43
Biowaste-derived nanocomposite of calcium oxide incorporated in nickel oxide for efficient removal of organic pollutants43
Response surface methodology for optimizing adsorption process parameters for tadalafil removal by raw eggshell43
Green synthesis of silver nanoparticles from waste Vigna mungo plant and evaluation of its antioxidant and antibacterial activity43
Duckweed (Lemna minor) biomass aqueous extract-mediated synthesis of silver nanoparticles as a novel formulation era for long-term efficacy against Tribolium castaneum and Sitophilus oryzae adults on 42
Cellulose–kaolin incorporated polymeric hydrogels and its application for dye removal: batch study and mechanism42
Green synthesis of binder-free plate from waste bamboo based on hydrothermal treatment42
Chemical constituents and in vitro biological activities of Mentha rotundifolia’s essential oils extracted by ultrasound-assisted hydrodistillation compared to conventional hydrodistillation41
The effect of impregnation ratio and surface modification on the characteristics and performance of activated carbon derived from Ficus carica leaves for Cr(VI) removal41
Sorption properties of Pb2+ ions from water by alkali activated slag/biochar composites40
Effect of silane-treated lignin and hybrid bamboo-green pea sheath fiber on mechanical, wear, and wettability behavior of epoxy structural composite40
Initial reaction mechanism of lignin and polyethylene steam co-gasification based on ReaxFF molecular dynamics simulation40
Effect of intermittent ball milling on high-solids enzymatic saccharification of rice straw40
Removal of boron from aqueous solution by modified cellulose40
Bio-benign synthesis of strontium, copper, and manganese nano-hydroxide from Carica papaya unveiling potential biocidal activity against bacterial strains and conversion to oxides and its characteriza40
Green generation of zinc oxide nanoparticles by flower extract of orange jasmine for photodegradation of pollutant and antimicrobial activities40
Porous carbon–based material from fish scales for the adsorption of tetracycline antibiotics40
The production of medium-co-long chain length (mcl-co-lcl) polyhydroxyalkanoate from waste soybean oil by Enterobacter sp. and its application as an antibacterial agent39
Anaerobic digestion of elephant camp–derived wastes: methane potential, kinetic study, and biorefinery platform39
Green synthesis, characterization and antioxidant activity of bimetallic (Ag-ZnO) nanoparticles using Capparis zeylanica leaf extract38
Microwave-assisted pyrolysis of wood-based panels for producing N-enriched bio-oil and N-doped biochar38
Emulsion formation during enzymatic protein hydrolysis and its effect on protein recovery and molecular weight distribution of protein hydrolysates from sardine (Sardina pilchardus) by-products38
Identification and quantification of valuable platform chemicals in aqueous product streams from a preliminary study of a large pilot-scale steam explosion of woody biomass using quantitative nuclear 38
Removal of chromate from water samples by cationic cellulose37
Developing convective–dispersive transport model to characterize fixed-bed adsorption of lead (II) over activated tea waste biosorbent37
A quick fed-batch saccharification strategy of wheat straw at high solid loadings improving lignocellulosic ethanol productivity37
Production of single cell protein by fungi from different food wastes37
Production of hydrochar from the hydrothermal carbonisation of food waste feedstock for use as an adsorbent in removal of heavy metals from water37
The influence of mild air conditions on the chemical properties and pyrolysis behavior of empty fruit brunches during torrefaction37
Effect of cassava tuber nanocellulose and satin weaved bamboo fiber addition on mechanical, wear, hydrophobic, and thermal behavior of unsaturated polyester resin composites37
Benign feature for copper oxide nanoparticle synthesis using sugarcane molasses and its applications in electrical conductivity and supercapacitor36
Energy conversion from Bauhinia malabarica seed as novel feedstock—optimisation for higher yield rate and fuel characterisation36
Production, optimization, and evaluation of thermal stability of palm oil biodiesel produced using a natural coconut oil–based surfactant36
Production and feasibility characterization of bio-oil from jojoba seed–based biomass through solar thermal energy pyrolysis process36
Oil–water separation in kitchen wastewater filtration using milkweed floss fiber36
Mechanical, wear, and dielectric properties of opuntia cladode fiber and pearl millet biochar-reinforced epoxy composite35
Oil flax straw processing and utilization35
The production of environmentally friendly building materials out of recycling walnut shell waste: a brief review35
Air and oxy-fuel incineration disposal of invasive biomass water lettuce (Pistia stratiotes L.): performance, kinetics, flue gas emissions, mechanisms, and ash characteristics35
Editorial for BCAB Special Issue “Lignocellulosic biorefinery”35
Using mini-xylanosomes as a biotechnological tool for sisal fiber deconstruction and enzyme immobilization34
Preparation of NiO-N/C composites for electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid34
Green synthesis of silver nanoparticles and their immobilization on magnetic biochar for the removal of tetracycline and enrofloxacin34
Cellulose nanocrystal production from bleached rice straw pulp by combined alkaline and acidic deep eutectic solvents treatment: optimization by response surface methodology34
Enhancement of thermochemical properties on rice husk under a wide range of torrefaction conditions34
Optimization of process parameters for production of bio-ethanol from waste potato following staged ultrasonic-assisted acid hydrolysis and saccharification34
Evaluation of various mathematical models for cell growth and high bioconversion potent protease production of Microbacterium sp. in shake flask fermentations34
Biosynthesis of ZnO NPs and ZnO$$\Vert $$CuO NC using Retama monosperma L. (Boiss) stems extract and their cationic dyes removal from wastewater under direct sunlight irradiation34
Optimizing pine needle pyrolysis: the role of pre-treatment in boosting bio-oil quality for sustainable energy production34
Sugarcane juice is an effective feedstock for the production of gellan gum: process development and characterization33
Impact of porous materials on the performance of a biogas porous burner33
Enhancement of total reducing sugar content from seaweeds (SWs) biomass via pretreatment for ethanol production: an optimized study33
Nano-adsorbents obtained from walnut and almond shells for the effective removal of aflatoxin B133
Effect of grid pattern and infill ratio on mechanical, wear, fatigue and hydrophobic behaviour of abaca bracts biocarbon-ABS biocomposites tailored using 3D printing33
Microalga Chlorella sp. in the cultivation with chicken farm biogas fermenter effluent and simultaneously nutrient removal32
Cerium oxide activated microalgae growth from grey wastewater for bio-hydrogen extraction via KOH catalyst adopted gasification route: performance evaluation32
Investigation of high water content in bio-crude oil (BCO) produced from empty oil palm fruit bunches pyrolysis32
Economic analysis for simultaneous production of microbial lipid and citric acid by oleaginous yeast cultivated on purified crude glycerol32
Enhanced fluoride removal by modified water hyacinth: response surface methodology and machine learning approach32
Extraction of fibres from Cucumis melo seed coat and its application as biosorbents for the effective removal of various dyes and antibiotic32
Recovery of Lignin From Hot Water Prehydrolysis of Groundnut Shell and Sugarcane Bagasse Biomass Using Silane-Modified Nanofiller-Reinforced Polysulfone Membrane32
Improved production of acrylamidase from Bacillus tequilensis through response surface methodology31
Synthesis of non-cytotoxic Co3O4 nanocatalysts for thermocatalytic methane decomposition by resource recovery31
Experimental investigation on the physicochemical properties of Terminalia catappa fiber31
Preparation and characterization of highly mesoporous activated carbon from Ziziphus Spina-Christi for tartrazine adsorption from a simulated effluent31
Conversion of finger millet husk waste as biosilica functional filler for Digitaria ischaemum fibre-epoxy composite: fatigue, creep, and flame retardant behaviour31
Soil physicochemical (colloidal) properties affected by ozonated water and organic fertilization31
The role of magnetic nanoparticles in dark fermentation31
Conversion of oily sludge into char via pyrolysis and microwave processes: physicochemical property and energy characteristic30
Numerical parametric optimization with desirability functions for methylene blue dye removal by sunflower seed pericarp activated carbon30
Hydrothermal treatment (HTT) for improving the fuel properties of biomass residues30
Investigation of steam explosion pretreatment on spectroscopic, thermodynamic, and textural properties of lignocellulosic biobased materials during a thermal degradation30
Performance evaluation of popular improved biomass cookstoves from a rural community along the Indo-Gangetic Plains30
Mosquito-pupicidal activity of the extracts of seaweeds, Sargassum wightii, and Gelidiella acerosa against the dengue vector, Aedes aegypti30
Nitrogen and sulfur-doped biochar supported magnetic CuZnFe2O4 as a sustainable adsorbent for efficient reactive black dye 5 removal from industrial wastewater30
Phytochemical screening of aerial organs of wild fennel essential oils from southeast Algeria: identification of chemical composition, antioxidant, and antimicrobial activities30
Optimization of methylene blue removal by H3PO4 thermochemically treated mixed pineapple peel and algae adsorbent and insight on the adsorption mechanism29
Adsorptive removal of crystal violet from aqueous solution by bioadsorbent29
Extraction optimization using response surface methodology and evaluation of the antioxidant and antimicrobial potential of polyphenols in Scenedesmus sp. and Chlorella sp.29
Optimization of biolipids production from Saccharomyces cerevisiae ATCC 9763 cultivated on Ampelodesmos mauritanicus (Diss) hydrolysate29
Removal of Cr(VI) by iron nanoparticles synthesized by a novel green method using Yali pear peels extracts: optimization, reactivity, and mechanism29
Mathematical and artificial neural network modelling for refractance window drying kinetics of coriander (Coriandrum sativum L.) followed by the determination of energy consumption, mass transfer para29
Evaluation and optimization of a novel system to produce electrical power, heat and freshwater based on biomass gasification29
An insight into the influence of random mutagenesis on growth and lipid accumulation in Chlorella vulgaris—a transcriptome study29
Adsorption of phenol on kenaf‐derived biochar: studies on physicochemical and adsorption characteristics and mechanism29
Remediation of hazardous dyes on low-cost biosorbent: batch and dynamic adsorption, phytotoxicity assessment, and application of industrial wastewater29
Impact of ultrasonic-assisted extraction on the release of bioactive compounds from Carica papaya Linn. leaves using probe and bath sonication29
Co-pyrolysis of polyolefin mixtures and oil palm fibre for the production of liquid fuel: kinetics and thermodynamic study29
Chemical characterization of Orchis mascula and its antibacterial efficiency against clinical isolated human pathogenic bacteria28
Utilization of bio-waste material pomegranate peel powder along with silver nitrate and polyvinyl alcohol to form a hybrid biofilm28
Optimization of the enzymatic extraction of catechins from Assam tea leaves28
Multifunctional finishing of cotton fabric using zinc oxide nanoparticles synthesized by bio-reduction method28
Bioconversion dynamics for bioremediation of chlorpyrifos pesticide using bacterial consortia in two immiscible liquid phase partitioning bioreactor28
A comprehensive chemical, physical, mechanical, and thermal characterization of novel cellulosic plant extracted from the petiole of Washingtonia robusta fibers28
Conventional vegetable waste: a potential source for the high performance of benthic microbial fuel cells28
Optimization of hydrolysis of cassava starch for biofuel production using a Hybrid Metaheuristic Algorithm27
Synthesis of reduced graphene oxide using methanolic extract of Sargassum tenerrimum and its antiproliferative activity against human colorectal adenocarcinoma HT-29 cell lines27
Effect of stacking sequence and high content silver slag addition on electromagnetic interference shielding of abaca/silk fiber reinforced epoxy sandwich composite27
Biomass and carbon sequestration potential of plantation trees in foothills of Jakanari Forest at Western Tamil Nadu, India27
Analysis of a biorefinery with multiple raw materials in the context of post-conflict zones in Colombia: plantain and avocado integration in the Montes de María region27
Extraction and characterization of lignin from waste invasive weeds with dioxane-based process27
Development of sustainable polyester biocomposites using Lansium parasiticum fruit shell powder and hemp chopped fibre: mechanical, wear, hydrophobic and flammability behaviour27
Initial characterization as an on-field decision-making tool for biological treatment of institutional wastes27
Development of potential consortia for biotransformation of lignin and polyaromatic hydrocarbons (PAHs)27
Extraction and characterization of Zingiber officinale–based essential oil and an assessment of its antioxidant, antibacterial, and antibiofilm activities27
Synergistic effect of biogas production from co-digestion of fish and vegetable market wastes and kinetic modelling27
Impact of temperature aging on behavioral changes in vinyl ester composite reinforced with Himalayan nettle fiber and silicious rock dust26
Copper complex stabilized on magnetic lignosulfonate: a magnetically recyclable catalyst for removal of wastewater contaminants26
Investigation of cold-active and mesophilic cellulases: opportunities awaited26
A novel cellulose acetate-polyoxometalate (PW11Fe(H2O)O39) hybrid membranes: preparation, characterization and study of their potential for humic acid adsorption26
Achieving circular economy through sustainable biofertilizer production from mixed municipal waste: a life cycle analysis approach26
Comparative analysis of lipid content in mono and co-culture microalgae for potential biodiesel production using diverse cell disruption techniques26
Microbial conversion and biovalorization of fermented cassava waste biomass into livestock-based diets26
Oil spill remediation by grafted natural polysaccharide gum tragacanth: its kinetics and isotherms studies26
A comparative study and thermophysical characterization of wool fiber from different regions of Morocco26
Extraction of flavonoids and phenolics from Berberis kongboensis fruit26
Production and characterization of biomixture fuels from raw oil feed stock and the effect of ionic liquid as an additive on biomixture fuels26
Sustainable synthesis of emerging bio-based magnetite nanoparticles for efficient removal of Cr(VI) from groundwater26
How to divide diverse biomass samples to build near-infrared spectroscopy models for gross calorific value26
A review of prospects and current scenarios of biomass co-pyrolysis for water treatment26
Effective utilization of silica from waste cow dung ash filler reinforced biodegradable jute epoxy composites: influence of silica on its mechanical properties25
Extracellular enzyme production by different species of Trichoderma fungus for lemon peel waste bioconversion25
Ultrasound-assisted extraction of phytochemicals from Empetrum hermafroditum Hager. using acid-based deep eutectic solvent: kinetics and optimization25
Dilute nitric acid pretreatment of Ulva biomass for production of fermentable sugars and its validation using Design of Experiments (DoE)25
Characterization of biochar derived from bamboo and its application to modulate the toxic effects of chromium on wheat plant25
Effect of fiber surface treatment on the mechanical, morphological, and dynamic mechanical properties of palm petiole fiber/LLDPE composites25
Dynamic simulation of lead(II) metal adsorption from water on activated carbons in a packed-bed column25
Production and characterization of the solid product of coconut pyrolysis25
Regenerated chitin from insect sources and fabrication of their hydrogel films as an alternative from marine sources25
Green carbon dots derived from honey, garlic, and carrot: Synthesis, characterization, and antibacterial properties25
Pyrolysis kinetics and thermodynamic parameters of macroalgae Cladophora glomerata based on multi-step devolatilization to assess its bioenergy potential25
The formation of biocrust and improvement of soil properties by the exopolysaccharide-producing cyanobacterium: a biogeotechnological study25
Innovative extraction technologies of bioactive compounds from plant by-products for textile colorants and antimicrobial agents25
Biosorption of cadmium ions from aqueous solution onto alkaline-treated coconut shell powder: kinetics, isotherm, and thermodynamics studies25
A comprehensive review on enzymatic decolorization of various azo dyes using laccase for the abatement of industrial pollution25
Study on the enzymatic pretreatment process of alkaline pulping of Wikstroemia monnula: Optimization by orthogonal design24
Development of high-performance CO2 adsorbents from urea-modified Leucaena leucocephala hydrochar24
One-pot production of 5-(chloromethyl)furfural and levulinic acid from marine carbohydrates24
Optimisation of torrefaction conditions of groundnut shell and maize stalk24
Promotion of hemicelluloses dissolution from bagasse/bagasse pith mixture using microwave expansion treatment24
Development of vinyl-based composite building material using Himalayan nettle fiber and granite rock dusk natural ceramic: mechanical, dry sliding wear, thermal degradation (TGA), and flame retardatio24
Development and characterization of ecofriendly polyester composites using bamboo fiber and cassava sheath biosilica24
Processing of silkworm (Bombyx mori) pupae waste and mealworm (Tenebrio molitor) larvae: Chemical characterization of extracts rich in anti-oxidant, anti-diabetic, and anti-obesity activity24
Enhancing sustainability in construction: Investigating starch/clay composites for green material development23
Chrysophyllum albidum stem bark extract coated tillite adsorbent for the uptake of Cr(VI): thermodynamic, kinetic, isotherm, and reusability23
Photocatalytic activity of calcined chicken bone waste doped with TiO2/MnO/SDS towards brewery wastewater treatment and hydrogen production—a circular economy-based approach23
Production and characterization of biochar from agro-forestry-based waste Prosopis juliflora: a sustainable amendment for soil conditioning23
Properties of Indonesian short rotation coppice (Calliandra calothyrsus) biochar as a coal substitute in the steelmaking process23
Innovative biorefinery concept for utilizing uncooked rice berry wastewater on the growth of strawberry23
Valorization of mosambi peels: comparative analysis of dehumidified and freeze-drying for essential oil extraction23
Insights into renewable biohydrogen production from algal biomass: technical hurdles and economic analysis23
A strategic approach towards the synthesis of jackfruit peel-based activated carbon: assessment of different activating agents and operating conditions23
Optimization of xylanase production from Aspergillus tamarii SCBH2 using response surface methodology23
Advances application of a newly developed microwave rotary dryer for drying agricultural products of red chili pepper23
Utilization of Lantana Camara, an invasive and hepatotoxic plant: a kinetic, thermodynamic and experimental studies on its gasification to hydrogen rich producer gas23
Retraction Note: Experimental investigation on slaughter, fish waste and poultry excrete oil as fuel blends in diesel engine23
Fungal combined with ammoniation pretreatment to promote enzymatic hydrolysis of corn stover23
Dynamic optimization of volatile fatty acids to enrich biohydrogen production using a deep learning neural network23
Research progress, trends, and future prospects on hydrothermal liquefaction of algae for biocrude production: a bibliometric analysis22
The conversion of municipal wastes process enhances the environmentally friendly and novel PFE-AgNPs into potential anti-bacterial and anticancer activities22
Optimized removal of cationic dye by using chemically activated and pyrolyzed carbon from date palm fiber22
Pre-treatment of chicken feather for enhancing the keratinolytic potential of bacteria isolated from feather dumping sites22
Correction to: Investigation of cytotoxicity and oral antibacterial effects of four biomaterials/herbal formulations22
Influence of skimmed coconut milk starter on the fermentation rate and biochemical quality attributes of virgin coconut oil22
Kinetic and thermodynamic analysis of biodiesel and associated oil from Jatropha curcas L. during thermal degradation22
Anaerobic co-digestion of sludge, sugarcane leaves, and Corchorus stalks in Egypt22
Bioactive compound recovery from Agave angustifolia Haw. leaf waste from bacanora industry: physicochemical properties, antioxidant and antimicrobial activity of the extract22
Synthesis of silver nanocoordination complex morpholine for the remediation of acid fuchsin dye and immobilization of Aspergillus sp. RL2Ct cutinase22
Extraction of pectin from Ethiopian prickly pear fruit peel and its potency for preparing of cellulose-reinforced biofilm22
Effect of chemically treated kenaf fiber on the mechanical, morphological, and microstructural characteristics of PLA-based sustainable bio-composites fabricated via direct injection molding route22
Multi-objective optimization of sugarcane bagasse pretreatment22
Enhanced photocatalytic degradation of methylene blue from aqueous solution using green synthesized ZnO nanoparticles22
Hydrolysis efficiency of sugarcane bagasse treated with fungal consortia isolated from leaf litter22
Isolation and characterization of cellulose nanofibers from rice straw using ultrasonication-assisted extraction technique coupled with high shear dispersion22
Plant extracts: Probable alternatives for traditional inhibitors for controlling alloys corrosion against acidic media—A review22
Nanoemulsion formulated with stem extract of Sideroxylon mascatense: characterization, antimicrobial evaluation, wound healing study, and blood sugar analysis activity22
Thermal degradation properties, kinetic, thermodynamic and reaction mechanism of pyrolysis of biomass shells: pistachio, almond, walnut and hazelnut as bioenergy potential22
Efficient adsorption of Sudan dyes from food and plants by activated carbon derived from Nelumbinis stamen22
Effect of phenolic compound recovery from agro-industrial residues on the performance of pyrolysis process21
Effective removal of lead (Pb) by natural biosorbent marine microalgae (Dunaliella salina) through batch experiment21
Investigation on functional properties of environmental bio-dyeing of silk fabric using Punica granatum biomass21
Effect on one-type dipping coating method of microstructure and physical properties of Indian almond fiber (IAF)/titanium oxide (TiO2)/zirconium oxide (Zr2O3)/carbon nanotube (CNT) inorganic-organic n21
N-Methyl-2-pyrrolidone pre-treatment of lignocellulose for high lignin yield and cellulose digestibility21
A perspective towards sustainable and economically viable approach of waste biorefineries through lignin valorization21
Optimization of physical activation process for activated carbon preparation from water caltrop husk21
Modeling and optimization of uricase production from a novel Pseudomonas mosselii using response surface methodology and artificial neural network21
Maximization of the bioethanol concentration produced through the cardboard waste fermentation by using ethylenediamine-modifying poly(acrylonitrile-co-methyl acrylate) membrane21
Sustainable synthesis and characterization of Enset cellulose nanocrystals (E-CNp) from Enset ventricosum biomass and its application in the fabrication of Enset cellulose nanocomposite (E-CNc)21
Experimental investigation on the usage of processed oil as a source to fuel the diesel engine21
Analyses on flexural properties and process optimization of bamboo fiber-polypropylene composites for automobile applications21
Biofabricated gold nanoparticles from Ammannia baccifera as potential antimicrobial, mosquito larvicidal activity, and alter immune response in zebrafish embryo21
Biomass gasification to syngas in thermal water vapor arc discharge plasma21
Correction to: A facile, low-thermal, and environmentally friendly method to improve the properties of lignin-containing cellulose nanocrystals (LCNCs) and cellulose nanofibrils (LCNFs) from bagasse u21
Tribulus terrestrias synthesized Fe3O4/ZnO nanocomposites for ultra-rapid methyl orange elimination using ultrasonic waves21
Effect of thermal and acid pre-treatment on increasing organic loading rate of anaerobic digestion of coffee pulp for biogas production21
Subsequent alkali-silane treated cellulose-free veld grape fiber and Ziziphus jujuba microparticle epoxy composite: characterization study21
In vitro biological assessment of green synthesized iron oxide nanoparticles using Anastatica hierochuntica (Rose of Jericho)20
Biobased carbon for effective removal of rhodamine B and Cr(VI) from aqueous solution: kinetic, isotherm and thermodynamic study20
Saccharification of carrot pomace and use as nutrient source for the production of ꞵ-cryptoxanthin by Pantoea anthophila FL1_IS520
Towards an eco-social circular economy: exploring the feasibility study of pyrolysis on agricultural feedstocks20
Low-temperature treatment of domestic sewage by electrokinetic-based reactor20
Naturally dispersed ash components in bio-carbon composites: integrated ammonia nitrogen removal and specific surface area augment20
Cost benefit and environmental impact assessment of compressed biogas (CBG) production from industrial, agricultural, and community organic waste from India20
Sustainably transforming biomass waste into porous carbon by a hydrothermal-activation strategy for high-performance hybrid supercapacitors20
Conversion of corn shell as biomass solid waste into carbon species for efficient decontamination of wastewater via heavy metals adsorption20
Spent yeast reuse as inoculum: a strategy to boost cellulosic ethanol productivity20
Assessment and analysis of drilling-induced damage in jute/palm date fiber-reinforced polyester hybrid composite20
Effect of ultrasound pre-treatment on ultrafiltration performance in obtaining phenolic compounds from wine production wastes20
Optimization of ultrasonic-microwave synergistic extraction of total flavonoids and antioxidant activity from Davidia involucrata leaves20
Effective adsorption of Brilliant Pink-B dye using bio adsorbent synthesized from agriculture waste: isotherm, kinetic, and thermodynamic studies20
Sustainable valorization of Cascabela thevetia fruit peel and seed waste biomass: characterization and thermo-kinetic analysis20
Fabrication of glutaraldehyde crosslinked chitosan/algae biomaterial via hydrothermal process: Statistical optimization and adsorption mechanism for MV 2B dye removal20
0.063760995864868