Beilstein Journal of Nanotechnology

Article	Citations
Aprepitant-loaded solid lipid nanoparticles: a novel approach to enhance oral bioavailability	188
Structure-dependent thermochromism of PAZO thin films: theory and experiment	75
Clays enhanced with niobium: potential in wastewater treatment and reuse as pigment with antibacterial activity	69
TiO2 immobilized on 2D mordenite: effect of hydrolysis conditions on structural, textural, and optical characteristics of the nanocomposites	68
Self-assembly and adhesive properties of Pollicipes pollicipes barnacle cement protein cp19k: influence of pH and ionic strength	59
Calculation of the dynamic stiffness of a cantilever under torsional oscillation	54
Heat-induced transformation of nickel-coated polycrystalline diamond film studied in situ by XPS and NEXAFS	41
Natural nanofibers embedded in the seed mucilage envelope: composite hydrogels with specific adhesive and frictional properties	36
Efficiency of single-pulse laser fragmentation of organic nutraceutical dispersions in a circular jet flow-through reactor	31
Hierarchically patterned polyurethane microgrooves featuring nanopillars or nanoholes for neurite elongation and alignment	29
Experimental investigation of usage of POE lubricants with Al 2 O 3 , graphene or CNT nanoparticle	28
Elasticity, an often-overseen parameter in the development of nanoscale drug delivery systems	27
Nanoscale capacitance spectroscopy based on multifrequency electrostatic force microscopy	27
Serum heat inactivation diminishes ApoE-mediated uptake of D-Lin-MC3-DMA lipid nanoparticles	26
Stimuli-responsive polypeptide nanogels for trypsin inhibition	25
Changes of structural, magnetic and spectroscopic properties of microencapsulated iron sucrose nanoparticles in saline	25
Shape, membrane morphology, and morphodynamic response of metabolically active human mitochondria revealed by scanning ion conductance microscopy	25
Direct electron beam writing of silver using a β-diketonate precursor: first insights	24
Fractional shot noise of an SU( N ) Kondo system	24
A visible-light photodetector based on heterojunctions between CuO nanoparticles and ZnO nanorods	23
Microneedle patches – the future of drug delivery and vaccination?	23
Strain-induced bandgap engineering in 2D ψ-graphene materials: a first-principles study	22
Simultaneous electrochemical determination of uric acid and hypoxanthine at a TiO2/graphene quantum dot-modified electrode	22
Quality by design optimization of microemulsions for topical delivery of Passiflora setacea seed oil	22
Synthesis of silver–palladium Janus nanoparticles using co-sputtering of independent sources: experimental and theorical study	22

Competitive helical bands and highly efficient diode effect in F/S/TI/S/F hybrid structures	21
Properties of tin oxide films grown by atomic layer deposition from tin tetraiodide and ozone	20
Electrospun polysuccinimide scaffolds containing different salts as potential wound dressing material	20
A nonenzymatic reduced graphene oxide-based nanosensor for parathion	20
Single-layer graphene oxide film grown on α-Al2O3(0001) for use as an adsorbent	19
A biomimetic approach towards a universal slippery liquid infused surface coating	19
Bolometric IR photoresponse based on a 3D micro-nano integrated CNT architecture	19
Plasmonic nanotechnology for photothermal applications – an evaluation	19
Roll-to-roll fabrication of superhydrophobic pads covered with nanofur for the efficient clean-up of oil spills	19
Integrating high-performance computing, machine learning, data management workflows, and infrastructures for multiscale simulations and nanomaterials technologies	19
Fluorescent bioinspired albumin/polydopamine nanoparticles and their interactions with Escherichia coli cells	19
Vinorelbine-loaded multifunctional magnetic nanoparticles as anticancer drug delivery systems: synthesis, characterization, and in vitro release study	19
In search of cytotoxic selectivity on cancer cells with biogenically synthesized Ag/AgCl nanoparticles	18
Near-infrared photoactive Ag-Zn-Ga-S-Se quantum dots for high-performance quantum dot-sensitized solar cells	17
Quantification of lead through rod-shaped silver-doped zinc oxide nanoparticles using an electrochemical approach	17
Observation of collective excitation of surface plasmon resonances in large Josephson junction arrays	17
Approaching microwave photon sensitivity with Al Josephson junctions	16
Exploring internal structures and properties of terpolymer fibers via real-space characterizations	16
Effects of substrate stiffness on the viscoelasticity and migration of prostate cancer cells examined by atomic force microscopy	16
Programmable soliton dynamics in all-Josephson-junction logic cells and networks	16
Solvent-induced assembly of mono- and divalent silica nanoparticles	16
Quantitative estimation of nanoparticle/substrate adhesion by atomic force microscopy	16
Wavelength-dependent correlation of LIPSS periodicity and laser penetration depth in stainless steel	15
Synthesis of Cu–Mo/TiO 2 and Co–Mo/TiO 2 photocatalysts for the efficient degradation of organic p	15
A distributed active patch antenna model of a Josephson oscillator	15
Green synthesis of zinc oxide nanoparticles toward highly efficient photocatalysis and antibacterial application	14
Sidewall angle tuning in focused electron beam-induced processing	14
PEGylated lipids in lipid nanoparticle delivery dynamics and therapeutic innovation	14
Functional surface engineering for cultural heritage protection: the role of superhydrophobic and superoleophobic coatings – a comprehensive review	14
Electronic and optical properties of chloropicrin adsorbed ZnS nanotubes: first principle analysis	13
Optical bio/chemical sensors for vitamin B 12 analysis in food and pharmaceuticals: state of the art, challenges, and future outlooks	13
Cooper pair splitting controlled by a temperature gradient	13
Overview of mechanism and consequences of endothelial leakiness caused by metal and polymeric nanoparticles	13
Realizing active targeting in cancer nanomedicine with ultrasmall nanoparticles	13
Fabrication and evaluation of BerNPs regarding the growth and development of Streptococcus mutans	13
Dual-heterodyne Kelvin probe force microscopy	12
Interface properties of nanostructured carbon-coated biological implants: an overview	12
Fast vortex dynamics and relaxation times in NbRe-based heterostructures	12
Batch preparation of nanofibers containing nanoparticles by an electrospinning device with multiple air inlets	12
Effect of radiation-induced vacancy saturation on the first-order phase transformation in nanoparticles: insights from a model	12
Nanoarchitectonics with cetrimonium bromide on metal nanoparticles for linker-free detection of toxic metal ions and catalytic degradation of 4-nitrophenol	11
In situ optical sub-wavelength thickness control of porous anodic aluminum oxide	11
The impact of tris(pentafluorophenyl)borane hole transport layer doping on interfacial charge extraction and recombination	11
Unveiling the potential of alginate-based nanomaterials in sensing technology and smart delivery applications	11
Isolation of cubic Si3P4 in the form of nanocrystals	11
Prospects of nanotechnology and natural products for cancer and immunotherapy	11
Effects of cutting tool geometry on material removal of a gradient nanograined CoCrNi medium entropy alloy	11
Deep learning for enhancement of low-resolution and noisy scanning probe microscopy images	11
Polycatecholamine nanocoatings on stainless steel: the effect on attachment of human fibroblasts and platelets	11
Evaluation of electrosynthesized reduced graphene oxide–Ni/Fe/Co-based (oxy)hydroxide catalysts towards the oxygen evolution reaction	10

Fabrication of metal complex phthalocyanine and porphyrin nanoparticle aqueous colloids by pulsed laser fragmentation in liquid and their potential application to a photosensitizer for photodynamic th	10
Piezoelectricity of hexagonal boron nitrides improves bone tissue generation as tested on osteoblasts	10
Straight roads into nowhere – obvious and not-so-obvious biological models for ferrophobic surfaces	10
Synthesis and antibacterial properties of nanosilver-modified cellulose triacetate membranes for seawater desalination	10
Detection and imaging of Hg(II) in vivo using glutathione-functionalized gold nanoparticles	10
Focused ion and electron beams for synthesis and characterization of nanomaterials	10
Functional fibrillar interfaces: Biological hair as inspiration across scales	10
Mechanical property measurements enabled by short-term Fourier-transform of atomic force microscopy thermal deflection analysis	10
Green synthesis of biomass-derived carbon quantum dots for photocatalytic degradation of methylene blue	10
Chiral plasmonic nanostructures fabricated with circularly polarized light	10
Further insights into the thermodynamics of linear carbon chains for temperatures ranging from 13 to 300 K	10
Nanostructured lipid carriers containing benznidazole: physicochemical, biopharmaceutical and cellular in vitro studies	9
Unveiling the nature of atomic defects in graphene on a metal surface	9
The influence of structure and local structural defects on the magnetic properties of cobalt nanofilms	9
Impact of adsorbate–substrate interaction on nanostructured thin films growth during low-pressure condensation	9
Insect attachment on waxy plant surfaces: the effect of pad contamination by different waxes	9
Comparative molecular dynamics simulations of thermal conductivities of aqueous and hydrocarbon nanofluids	9
Intermodal coupling spectroscopy of mechanical modes in microcantilevers	9
Gold nanoparticle-decorated reduced graphene oxide as a highly effective catalyst for the selective α,β-dehydrogenation of N -alkyl-4-piperidones	9
Bioinspired polypropylene-based functionally graded materials and metamaterials modeling the mistletoe–host interface	8
Nanotechnological approaches in the treatment of schistosomiasis: an overview	8
On the additive artificial intelligence-based discovery of nanoparticle neurodegenerative disease drug delivery systems	8
Green SPIONs as a novel highly selective treatment for leishmaniasis: an in vitro study against Leishmania amazonensis intracellular amastigotes	8
Nanocarrier-integrated multilayer films produced by 3D printing for improved skin adhesion and curcumin photostability	8
Engineered PEG–PCL nanoparticles enable sensitive and selective detection of sodium dodecyl sulfate: a qualitative and quantitative analysis	8
Impacts of annealing on structural and photophysical properties of zinc phthalocyanine adsorbed on graphene	8
Insights into the electronic and atomic structures of cerium oxide-based ultrathin films and nanostructures using high-brilliance light sources	8
Ar+ implantation-induced tailoring of RF-sputtered ZnO films: structural, morphological, and optical properties	8
Ni, Co, Zn, and Cu metal-organic framework-based nanomaterials for electrochemical reduction of CO2: A review	8
Comparative electron microscopy particle sizing of TiO2 pigments: sample preparation and measurement	8
Level set simulation of focused ion beam sputtering of a multilayer substrate	8
Acrocomia aculeata oil-loaded nanoemulsion: development, anti-inflammatory properties, and cytotoxicity evaluation	8
Heterogeneous reactions in a HFCVD reactor: simulation using a 2D model	7
Micro- and nanoscale effects in biological and bioinspired materials and surfaces	7
The cement of the tube-dwelling polychaete Sabellaria alveolata : a complex composite adhesive material	7
Towards targeted drugs and next generation of nanomedicines	7
Piezoelectricity of layered double hydroxides: perspectives regarding piezocatalysis and nanogenerators	7
Radiosensitizing properties of dual-functionalized carbon nanostructures loaded with temozolomide	7
Solar-light-driven LaFexNi1−xO3 perovskite oxides for photocatalytic Fenton-like reaction to degrade organic pollutants	7
Synthesis of a multicomponent cellulose-based adsorbent for tetracycline removal from aquaculture water	7
Classification and application of metal-based nanoantioxidants in medicine and healthcare	7
Multiscale modelling of biomolecular corona formation on metallic surfaces	7
Two-step single-reactor synthesis of oleic acid- or undecylenic acid-stabilized magnetic nanoparticles by thermal decomposition	7
Advancing nanolithography: a comprehensive review of materials for local anodic oxidation with AFM	7
Titania nanoparticles for photocatalytic degradation of ethanol under simulated solar light	7
Enhancing the therapeutical potential of metalloantibiotics using nano-based delivery systems	7
A multi-resistance wide-range calibration sample for conductive probe atomic force microscopy measurements	7
The role of a tantalum interlayer in enhancing the properties of Fe3O4 thin films	7
Local work function on graphene nanoribbons	7
Controllable physicochemical properties of WOx thin films grown under glancing angle	7
Green synthesis of carbon dot structures from Rheum Ribes and Schottky diode fabrication	7
Laser ablation in liquids for shape-tailored synthesis of nanomaterials: status and challenges	7
Temperature and chemical effects on the interfacial energy between a Ga–In–Sn eutectic liquid alloy and nanoscopic asperities	7
Single-step extraction of small-diameter single-walled carbon nanotubes in the presence of riboflavin	7
Electrocatalytic oxygen reduction activity of AgCoCu oxides on reduced graphene oxide in alkaline media	7
Bioselectivity of silk protein-based materials and their bio-inspired applications	7
Synthesis, characterization and anticancer effect of doxorubicin-loaded dual stimuli-responsive smart nanopolymers	6
Comparative analysis of the ultrastructure and adhesive secretion pathways of different smooth attachment pads of the stick insect Medauroidea extradentata (Phasmatodea)	6
Development and in vitro evaluation of liposomes and immunoliposomes containing 5-fluorouracil and R-phycoerythrin as a potential phototheranostic system for colorectal cancer	6
Concentration-dependent photothermal conversion efficiency of gold nanoparticles under near-infrared laser and broadband irradiation	6
Exploring the relationships between physiochemical properties of nanoparticles and cell damage to combat cancer growth using simple periodic table-based descriptors	6
ReactorAFM/STM – dynamic reactions on surfaces at elevated temperature and atmospheric pressure	6
A nanocarrier containing carboxylic and histamine groups with dual action: acetylcholine hydrolysis and antidote atropine delivery	6
Efficient liquid exfoliation of KP15 nanowires aided by Hansen's empirical theory	6
The origin of black and white coloration of the Asian tiger mosquito Aedes albopictus (Diptera: Culicidae)	6
Laser–material interactions in liquids for the synthesis of nanomaterials: current status and perspectives	6
Nanocarrier systems loaded with IR780, iron oxide nanoparticles and chlorambucil for cancer theragnostics	6
Low temperature atomic layer deposition of cobalt using dicobalt hexacarbonyl-1-heptyne as precursor	6
Atomistic insights into the morphological dynamics of gold and platinum nanoparticles: MD simulations in vacuum and aqueous media	6
Fabrication of hafnium-based nanoparticles and nanostructures using picosecond laser ablation	6
Tailoring of physical properties of RF-sputtered ZnTe films: role of substrate temperature	6
Observation of multiple bulk bound states in the continuum modes in a photonic crystal cavity	6
New design of operational MEMS bridges for measurements of properties of FEBID-based nanostructures	6
Energy spectrum and quantum phase transition of the coupled single spin and an infinitely coordinated Ising chain	6
Berberine-loaded polylactic acid nanofiber scaffold as a drug delivery system: The relationship between chemical characteristics, drug-release behavior, and antibacterial efficiency	6
Enhancing higher-order modal response in multifrequency atomic force microscopy with a coupled cantilever system	6
Towards a quantitative theory for transmission X-ray microscopy	6
unDrift: A versatile software for fast offline SPM image drift correction	6
The steep road to nonviral nanomedicines: Frequent challenges and culprits in designing nanoparticles for gene therapy	6
Determination of the radii of coated and uncoated silicon AFM sharp tips using a height calibration standard grating and a nonlinear regression function	6

Synchrotron X-ray photoelectron spectroscopy study of sodium adsorption on vertically arranged MoS2 layers coated with pyrolytic carbon	6
Nanotechnology-based approaches for the removal of microplastics from wastewater: a comprehensive review	6
Recent progress on field-effect transistor-based biosensors: device perspective	6
Theoretical study of the electronic and optical properties of a composite formed by the zeolite NaA and a magnetite cluster	6
Nanoarchitectonics to entrap living cells in silica-based systems: encapsulations with yolk–shell and sepiolite nanomaterials	6
Enhancing mechanical properties of chitosan/PVA electrospun nanofibers: a comprehensive review	6
Investigations on the optical forces from three mainstream optical resonances in all-dielectric nanostructure arrays	6
Decontamination from water pollutants and pathogens by electrospun nanofibers doped with heavy-atom-free borafluorene-BODIPY photosensitizers	6
Combining physical vapor deposition structuration with dealloying for the creation of a highly efficient SERS platform	5
Two-step laser synthesis of Ag@TiO 2 nanomaterials for the photocatalytic degradation of rhodamine B	5
Zeolite materials with Ni and Co: synthesis and catalytic potential in the selective hydrogenation of citral	5
Utilizing the surface potential of a solid electrolyte region as the potential reference in Kelvin probe force microscopy	5
Dendrimer-modified carbon nanotubes for the removal and recovery of heavy metal ions from water	5
Beyond the shell: exploring polymer–lipid interfaces in core–shell nanofibers to carry hyaluronic acid and β-caryophyllene	5
Dry under water: air retaining properties of large-scale elastomer foils covered with mushroom-shaped surface microstructures	5
Nanoarchitectonics for advanced applications in energy, environment and biology: Method for everything in materials science	5
Quantitative dynamic force microscopy with inclined tip oscillation	5
Quantum circuits with SINIS structures	5
Structural studies and selected physical investigations of LiCoO 2 obtained by combustion synthesis	5
Probing the potential of rare earth elements in the development of new anticancer drugs: single molecule studies	5
Design and characterization of polymeric microneedles containing extracts of Brazilian green propolis	5
Silver-based SERS substrates fabricated using a 3D printed microfluidic device	5
Interaction between honeybee mandibles and propolis	5
Precursor sticking coefficient determination from indented deposits fabricated by electron beam induced deposition	5
Intermixing of MoS2 and WS2 photocatalysts toward methylene blue photodegradation	5
Spatial variations of conductivity of self-assembled monolayers of dodecanethiol on Au/mica and Au/Si substrates	5
Green synthesis of silver nanoparticles derived from algae and their larvicidal properties to control Aedes aegypti	5
Graphene removal by water-assisted focused electron-beam-induced etching – unveiling the dose and dwell time impact on the etch profile and topographical changes in SiO2 substrates	5
Fabrication and testing of polymer microneedles for transdermal drug delivery	5
Interconnection morphology effects on the radio frequency response of carbon nanotube sponges	5
Studies of probe tip materials by atomic force microscopy: a review	5
New application of bimetallic Ag/Pt nanoplates in a colorimetric biosensor for specific detection of E. coli in water	5
N-Heterocyclic carbene-based gold etchants	5
Curcumin-loaded nanostructured systems for treatment of leishmaniasis: a review	5
Thermal transport in kinked nanowires through simulation	5
Polymer lipid hybrid nanoparticles for phytochemical delivery: challenges, progress, and future prospects	5
Double-layer symmetric gratings with bound states in the continuum for dual-band high-Q optical sensing	5
Nanomaterials in targeting amyloid-β oligomers: current advances and future directions for Alzheimer's disease diagnosis and therapy	5
High–low Kelvin probe force spectroscopy for measuring the interface state density	5
Introducing third-generation periodic table descriptors for nano-qRASTR modeling of zebrafish toxicity of metal oxide nanoparticles	5
AI-assisted models to predict chemotherapy drugs modified with C60 fullerene derivatives	5
Targeting the vector of arboviruses Aedes aegypti with nanoemulsions based on essential oils: a review with focus on larvicidal and repellent properties	4
Nanoarchitectonics of photothermal materials to enhance the sensitivity of lateral flow assays	4
Reliable fabrication of transparent conducting films by cascade centrifugation and Langmuir–Blodgett deposition of electrochemically exfoliated graphene	4
Liquid phase exfoliation of talc: effect of the medium on flake size and shape	4
Hierachical epicuticular wax coverage on leaves of Deschampsia antarctica as a possible adaptation to severe environmental conditions	4
Upper critical magnetic field in NbRe and NbReN micrometric strips	4
Parylene-coated platinum nanowire electrodes for biomolecular sensing applications	4
Induced electric conductivity in organic polymers	4
Biocatalytic synthesis and ordered self-assembly of silica nanoparticles via a silica-binding peptide	4
Design of a biomimetic, small-scale artificial leaf surface for the study of environmental interactions	4
Prediction of cytotoxicity of heavy metals adsorbed on nano-TiO2 with periodic table descriptors using machine learning approaches	4
Investigating structural and electronic properties of neutral zinc clusters: a G0W0 and G0W0Г0(1) benchmar	4
Electrochemical determination of ciprofloxacin using a MIL-101/reduced graphene oxide-modified electrode	4
Ion-induced surface reactions and deposition from Pt(CO)2Cl2 and Pt(CO)2Br2	4
Comparison of organic and inorganic hole transport layers in double perovskite material-based solar cell	4
Mechanical stability of individual bacterial cells under different osmotic pressure conditions: a nanoindentation study of Pseudomonas aeruginosa	4
Internal 3D temperature mapping in biological systems using ratiometric light-sheet imaging and lipid-coated upconversion nanothermometers	4
Numerical modeling of a multi-frequency receiving system based on an array of dipole antennas for LSPE-SWIPE	4
Sulfur nanocomposites with insecticidal effect for the control of Bactericera cockerelli	4
Beyond biomimicry – next generation applications of bioinspired adhesives from microfluidics to composites	4
Radiofrequency enhances drug release from responsive nanoflowers for hepatocellular carcinoma therapy	4
Influence of water contamination on the sputtering of silicon with low-energy argon ions investigated by molecular dynamics simulations	4
Various CVD-grown ZnO nanostructures for nanodevices and interdisciplinary applications	4
Tunable high-quality-factor absorption in a graphene monolayer based on quasi-bound states in the continuum	4
Cellulose as a photocatalyst support material: extraction, structural features, and environmental applications	4
Development and characterization of potential larvicidal nanoemulsions against Aedes aegypti	4
Facile synthesis of Fe-based metal–organic frameworks from Fe2O3 nanoparticles and their application for CO2/N2 separation	4
Instance maps as an organising concept for complex experimental workflows as demonstrated for (nano)material safety research	4
Density functional theory study of Au-fcc/Ge and Au-hcp/Ge interfaces	4
Soft materials nanoarchitectonics: liquid crystals, polymers, gels, biomaterials, and others	4
Transferability of interatomic potentials for silicene	4
Effect of wavelength and liquid on formation of Ag, Au, Ag/Au nanoparticles via picosecond laser ablation and SERS-based detection of DMMP	4
Numerical study on all-optical modulation characteristics of quantum cascade lasers	4
Subdigital integumentary microstructure in Cyrtodactylus (Squamata: Gekkota): do those lineages with incipiently expressed toepads exclusively exhibit ad	4
Recent trends in Bi-based nanomaterials: challenges, fabrication, enhancement techniques, and environmental applications	4
Capabilities of the 3D-MLSI software tool in superconducting neuron design	4
Retrieval of B1 phase from high-pressure B2 phase for CdO nanoparticles by electronic excitations in CdxZn1−xO composite thin films	4
Biomimetic nanocarriers: integrating natural functions for advanced therapeutic applications	4
Two-dimensional molecular networks at the solid/liquid interface and the role of alkyl chains in their building blocks	4
Elastic modulus of β-Ga2O3 nanowires measured by resonance and three-point bending techniques	4
Ultrablack color in velvet ant cuticle	4
A bifunctional superconducting cell as flux qubit and neuron	4
Ambient pressure XPS at MAX IV	4
Multifrequency AFM integrating PeakForce tapping and higher eigenmodes for heterogeneous surface characterization	4
Optimizing PMMA solutions to suppress contamination in the transfer of CVD graphene for batch production	4
Functional morphology of cleaning devices in the damselfly Ischnura elegans (Odonata, Coenagrionidae)	4
N2+-implantation-induced tailoring of structural, morphological, optical, and electrical characteristics of sputtered molybdenum thin films	4
Rapid and sensitive detection of box turtles using an electrochemical DNA biosensor based on a gold/graphene nanocomposite	3
A review on the structural characterization of nanomaterials for nano-QSAR models	3
Determining by Raman spectroscopy the average thickness and N-layer-specific surface coverages of MoS2 thin films with domains much smaller than the laser spot size	3
Orientation-dependent photonic bandgaps in gold-dust weevil scales and their titania bioreplicates	3
Environmental applications of silver nanoparticles: state-of-the-art review and emerging trends	3
Modeling magnetic properties of cobalt nanofilms used as a component of spin hybrid superconductor–ferromagnetic structures	3
Design and selection of peptides to block the SARS-CoV-2 receptor binding domain by molecular docking	3