AIP Advances

Article	Citations
In silico discovery of tyrosinase-inhibiting natural products	158
The role of sintering temperature in determining the microstructure, mechanical properties, and γ-ray shielding of Fe–18W–0.4C high tungsten alloy	126
16th Joint Magnetism and Magnetic Materials and Intermag Conference - gif	117
Conservation laws, stability analysis, and dynamics of dispersive optical soliton solutions for higher-order nonlinear Schrödinger model with applications in single-mode optical fibers	113
Resolved-sideband micromotion sensing in Yb+ on the 935 nm repump transition	112
Failure of the mean-field description of magnetic fluctuations in the superconducting quantum dot	110
A non-standard computational method for stochastic anthrax epidemic model	103
Mode conversion via reflected stepped phase plate in relativistic systems	87
Thermodynamic, quantum efficiency, and photocatalytic properties of Cs2MZ6 (M = Ti, Zr, Hf; Z = Cl, I) double perovskites using DFT approach	77
Analysis of magnetostriction of oriented silicon steel under motor magnetic field	76
Resistive flexible strain sensor based on AgNWs-Gr-PDMS for wearable electronics	64
Solvothermal vapor annealing setup for thin film treatment: A compact design with in situ solvent vapor concentration probe	51
Broadband infrared polarizer of graphene wire grids with flat PER curves	50
Computational analysis of entropy generation optimization for Cu–Al2O3 water-based chemically reactive magnetized radiative hybrid nanofluid flow	49
Key node identification via fusing simplicial random walk and convolutional neural network	48
A multi-purpose reciprocating probe drive system for studying the effect of gas-puffs on edge plasma dynamics in the ADITYA-U tokamak	44
Application of electroplated Ni–Fe thick film to magnetostrictive material in vibration power generator	43
Measurement of magnetic properties of grain-oriented electrical steel considering multi-physics factors influence	38
Tracking control of a piezo-actuated compliant mechanism based on an improved Bouc–Wen hysteresis model with variable parameters	38
First spectroscopic studies in the plasma-beam installation	38
Heat transfer model and cooling performance of converter oxygen lance affected by slag sticking	36
Longitudinal flight dynamics modeling and a flight stability analysis of a monocopter	34
Preparation and performance evaluation of Al–Mg alloy powder capsules	34
Consequences of thermal conductivity and thermal density on heat and mass transfer in the nanofluid boundary layer flow toward a stretching sheet in the presence of a magnetic field	33
Bulk InAsSb-based upside-down pCBn photodetectors with greater than 5 µm cut-off wavelength	33

Novel multi-magnetic material transcranial magnetic stimulation coils for small animals application	32
GeSeTe-based OTS selector integrated with ReRAM for high-density 1S-1R memory arrays	31
Bayesian and non-Bayesian two-sample prediction for the Fréchet distribution under progressive type II censoring	31
Surface defect detection of Si3N4 ceramic bearing ball based on improved homomorphic filter-Gaussian filter coupling algorithm	30
Janet bases and general solutions of Maxwell’s equations in vacuum	30
Hydrophilic antifogging surfaces: Principle, fabrication, and progress	30
Physical properties with high specific loss power of magnetite (Fe3O4) synthesized via thermal decomposition technique	29
Optical thermometry and fingerprint detection in SrLa1−xEuxLiTeO6 phosphors with abnormal thermal quenching effect	29
Ultra-highly efficient SOT-writing in MTJs with strain-induced magnetic anisotropy	28
Research of edge-aligned staggered double-vane traveling-wave tube at G-band	28
Data-driven depth-averaged current prediction methods for underwater gliders with sailing parameters	27
A refined numerical investigation of a large equivalent shallow-depth underwater explosion	27
Ferromagnetism in (Cr, Mn)-co-doped 3C–SiC analyzed using density functional theory	27
Analytical thermal resistance network model for calculating each mean die temperature of the multi-chips module combined with quad flat no-leads packaging	27
Optimal solar cell sorting method for high module production reliability	27
The distinctions of the crystallization process of the interphase in polypropylene on untreated and different functional groups-treated CNTs by molecular dynamics simulation	26
Investigation of load effect on the magnetization performance of stator consequent pole memory machine	25
Direct sensing of temperature dependence of electric field and conductivity of liquids using glass microelectrodes	25
Atomistic model of the anisotropic response of ortho-Mo2C to indentation	25
The microwave absorption properties of soft magnetic materials in frequency up to 40 GHz	25
Dual-functional copper oxide nanofluids for transformer: Synergistic enhancement of antimicrobial and insulating properties	24
Investigation of laser absorption efficiency in planar plasma produced by laser irradiation at various incidence angles	24
Magnetic anisotropy investigation of grain-oriented electrical steels for a wide range of temperatures	24
Investigation on sensorless operation of two new fault-tolerant interior permanent magnet motors with trade-off of fault tolerance and flux-intensifying effects	24
Using the critical behavior in Zn1−xMnxTe to probe the relationship between quasi-two-dimensional and three-dimensional spin-glasses	24
Directional transmission of acoustic wave based on sector-shaped structure	24
Room temperature magnetic properties of Mn-Ga-B melt-spun ribbons	23
Bit-island arrangement and signal processing in double-layer magnetic recording technology	23
Quantifying uncertainty in robotics trajectories: A time-dependent approach using polynomial chaos expansion	23
Raman spectroscopic features of protective rusts found in world heritage: New development of Albrecht’s vibronic theory	23
Sedimentation of magnetorheological fluids measured using an automated vertical axis inductance monitoring system	23
Photo-enhanced output in memdiode devices based on hybrid materials	23
Numerical analysis of pantograph–catenary coupling vibration for high-speed railways	23
A flexible triboelectric nanogenerator based on poly(vinylidene fluoride-vinyl chloride) for basketball dribbling technique training	22
Performance comparison analysis and process suggestion through slotless SPMSM during high-speed operation	22
Mobility of 2D electron gas in polar semiconductors	22
Airy-type bichromatic wave pulses on the sea surface and generation of rogue waves	22
Grain structure influence on synchronized two-dimensional spin-Hall nano-oscillators	22
Dynamic characteristic analysis and load design of large floating structures based on experimental design	22
Dynamical analysis of a class of SEIR models through delayed strategies	22
A new bilevel algorithm for UUV global path planning	22
Research on the influence of curtain grouting parameters on the stability of tunnel surrounding rock and lining structure under the action of local high water pressure	22
α-, β-phenomena for the supersonic flow around an impulsively started circular cylinder	21
Distribution of the built-in field extracted from switching dynamics in HfO2-based ferroelectric capacitor	21
Application of ImPASS to translated images produces image resolution below the optical diffraction resolution limit	21
High-speed rotating mechanism based on multi-sensor data fusion end face displacement determination method	21
Numerical simulation of gas drainage from goaf via high-level borehole in gently inclined seams	21
Experimental study on subwavelength focusing optical field detection methods for micro-Fresnel zone plate	20
Preparation and mechanical performance analysis of porous Ti6Al4V scaffold fabricated by direct ink writing	20
The visual motion blur elimination method for silicon nitride bearing roller fissures based on U-Net asymmetric multi-scale feature fusion	20

Tunable acoustic passive phased array based on double-opening resonant rings	20
Evaluation of new Garima data using type-II generalized progressive-hybrid technique and its application to a sodium–sulfur battery	20
Early mechanical properties and strength calculation method of slag-based alkali activated concrete	20
Goniometric accuracy and compensation methods for full-space laser positioning systems	20
Research on electromagnetic scattering characteristics of flexible stealth material based on its 3D model	19
Ultra-wideband RCS reduction based on reflection cancellation and tunable absorption	19
Ultraviolet absorption of point defects in high purity bulk AlN	19
Neural network flow optimization using an oscillating cylinder	19
Active fault-tolerant control for asynchronous machines using EKF-based fault estimation and 3-H-bridge inverter mitigation of ITSCs	19
Praseodymium-dopant effect on bismuth-substituted yttrium iron garnet films on fused silica glass substrate at the 1310 and 1550-nm wavelengths	19
Research on intelligent analysis device for dynamic error of electric energy	19
Fabrication and characterization of silicon nano-tip memristor for low-power neuromorphic application	19
A novel coalesced quantum dot buffer approach to mitigate large lattice mismatch in III–V epitaxy	19
Noise suppression method for OPGW transmission line galloping monitoring by using adjacent FBG sensors	19
Fast loaded dual species magneto optical trap of cold sodium and potassium atoms with light-assisted inter-species interaction	19
Hybrid finite-volume–finite-element scheme for 3D simulation of thermal plasma arc configuration	19
Non-volatile tuning of narrowband guided-mode resonance with strong absorption modulation	19
An absolute ranging method based on FMCW principle using dual laser interferometry	19
A simple setup for in situ alkali metal electronic spin polarimetry	18
Simulation and optimization of spectral parameters of resonant optical gyroscope	18
Investigation of a nanostructured GaP/MoS2 p-n heterojunction photodiode	17
The role of electron extinction in the breakdown strength of nanocomposite capacitors	17
Effect of magnetron sputtering process parameters on the conductivity of thin metal film	17
Study on localized corrosion behavior of hot extrusion deformed GW103K magnesium alloy	17
Effect of mole weight ratio of reaction on propagation of cellular detonations	17
On the nature of thermally activated defects in n-type FZ silicon grown in nitrogen atmosphere	17
Comparison of electric field characteristics of trigatron gas switch in FBM and SBM	17
Single-element real-time interferometric system for measuring dynamic temperature field of liquid medium	17
Study on the decomposition mechanism and insulation stability of HFO-1336mzz(E)/air mixtures as a new environment-friendly insulation medium under AC voltage	17
Preparation of a series of new buffer materials for coated conductors	17
Segmented vortex wavefront coherent beam combining	17
Temperature dependence of tunnel magnetoresistance in serial magnetic tunnel junctions	17
Dielectric spectroscopy of poly(ethylene oxide)–carbon nanotube nanocomposites	17
FEA simulations for low-frequency multi-layer magnetically shielded rooms	17
Drag scaling law and parachute terminal velocity of the dandelion	16
Tilted-angle insensitive received signal strength in visible light positioning systems using a deep neural network trained by synthetic data	16
Performance comparison of liquid, vapor, and liquid–vapor injection of single-screw compressor for an air-source heat pump	16
First-principles study of two-dimensional half-metallic ferromagnetism in NiXCl (X = S and Se) monolayer	16
Deep residual shrinkage network with multichannel VMD inputs for noise reduction of micro-thrust measurement	16
The influences of glass–glass interfaces and Ni additions on magnetic properties of transition-metal phosphide nano-glasses	16
Simulation of plutonium-aerosol rise under chemical explosion conditions	16
Dynamic response of aerodynamic flutter of blooie line during gas drilling in mountain areas	16
Investigation of friction coefficient to improve traction condition in R2R transport system	16
Modifications in the magnetocaloric effect owing to composition changes in Gd2In1−x Ge x (0 ≤ x ≤ 0.2) system of compounds	16
Interference fringe fitting of atom gravimeter based on fitness particle swarm optimization	16
Laser wireless power transfer and thermal regulation method driven by transient laser grating	16
Research on the performance of green and environmentally friendly epoxy resin impregnated paper 110 kV current transformer	15
Creation of higher order quantum NOON states using super-radiant emitters in the cavity	15
Strain-modulated electronic transport in two-dimensional carbon allotropes	15
Advanced AI techniques for optimizing resource allocation in 6G networks: A hybrid diffusion-enhanced meta-deep-reinforcement-learning framework	15
On estimation of the quadratic hazard rate model parameters: Simulation and application	15
Experimental study on the formation of two axial jets of cavitation bubbles near soft membranes with different thicknesses	15
Monitoring rock bolt safety based on FBG sensors	15
Enhancement of electrical conductivity of Zn4Sb3 by addition of ZnO particles	15
Effects of thermal shock on mechanical properties and microstructural integrity of aluminum–SiC composites	15
Pressure-induced phase transition in cubic Yb2O3 and phase transition enthalpies	15
Study on strength criterion of composite solid propellants under complex loading	15
Deriving the cosmological constant from the Euler–Lagrange equation of second-order differentiable gravitational field Lagrangian	15
On the positron-acoustic Kawahara solitary and cnoidal waves in a non-Maxwellian electron–positron–ion plasma	15
State of the art in energy consumption using deep learning models	15
Research on transportation vibration and short-circuit resistance of mobile transformer	15
Recent advances in flow separation control of airfoils through surface grooves	14
PVDF/PAN-based triboelectric nanogenerator for biomechanical energy harvesting and health monitoring applications	14
Investigation on a coaxial HPM generator with low magnetic field	14
Numerical investigation of performance characteristics in a bearingless direct-drive centrifugal pump under extreme operating conditions	14
Investigations of void collapse in nanoporous Cu by molecular dynamics simulations	14
Toward a simple yet efficient cost function for the optimization of Gaussian process regression model hyperparameters	14
Temperature dependence of cathodoluminescence emission in irradiated Si-doped β-Ga2O3	14
Generation performance of self-biased dielectric elastomer generator based on charge pump circuit	14
Observation of the effects of ultra-thin Cr and Ti layers on spin–orbit torque and Dzyaloshinskii–Moriya interaction in Co/Ni/Pt system	14
Blue and red LEDs application in horticultural lighting for mineral absorption of okra leaves at the late growth stage	14
Investigation of the influence of different liquid temperatures on the dynamics of long-pulse laser-induced cavitation bubbles	14
A novel dynamic image watermarking technique with features inspired by quantum computing principles	14
Shear stress induced phase transitions of cubic Eu2O3 under non-hydrostatic pressures	14
Novel numerical approach toward hybrid nanofluid flow subject to Lorentz force and homogenous/heterogeneous chemical reaction across coaxial cylinders	14
Disentangling the confounding spectroscopy of C1 molecules: Without symmetry as a guide, everything is allowed	14
An online tunable TE11 dual-circular polarizer applied for modern high-power radar system	14
Portable tunable interband cascade laser spectrometer using thin-film waveguides for food contaminant analysis	14
Microscopic plastic deformation in Ti2AlNb alloy micro-pillars: An in situ SEM study	14
Wave-like emission propagation and fine structures at the contact points of adjacent dielectric pellets in packed bed plasma reactors (PBPRs) operated in helium	14

Enhancing photon recycling of perovskite nanosheet by two-photon excitation	14
Deep subwavelength hybrid metamaterial for low-frequency underwater sound absorption by quasi-Helmholtz resonance	14
Study on combined stress failure envelope of CMG based on PSO-BP neural network	14
A study of dual-cantilever beam FBG sensing detection of transformer winding vibration	14
A method for LFM signal parameter estimation based on MWC system and STFT-DPT	13
Research on fluid domain characteristics in silicon carbide grinding with central water supply grinding disk	13
Research on parallel algorithm of high-power microwave devices simulation based on MPI-3	13
Discharge characteristics of an atmospheric pulsed microwave Ar/CF4 plasma jet	13
Ultrafast time-resolved two-dimensional velocity mapping of the hot-dense plasmas generated by intense-laser pulses	13
Using deep machine learning to interpret proton radiography data from a pulsed power experiment	13
Solving magnetic induction heating problem with multidimensional Fredholm integral equation methods: Alternative approach for optimization and evaluation of the process performance	13
Hydrodynamic tuning of nitrogen plasma in a fast pulsed channel for liquid activation stability	13
Computational insights and phase transition of ruthenium alloy by classical molecular dynamics simulations	13
Effect of insulation material on the firing performance of TaN@(Al/Ni)	13
Band valley modification under strain in monolayer WSe2	13
A fractional integral method inverse distance weight-based for denoising depth images	13
Optimizing blood glucose regulation in type 1 diabetes: A fractional order controller approach	13
Wireless-based portable device heart rate measurement as biomedical devices for stress detection	13
Soft radio frequency microstrip bandpass filter: Precise design and demonstration	13
Study on phase demodulation algorithm of fiber optic pressure sensor based on nonlinear differential equation	13
Research on fractional symmetry based on Riesz derivative	13
Ab initio analysis of MxLa1−xB6 as a solar radiation shielding material	13
Study on explosive emission characteristics of the silicon carbide modified graphite cathodes with varied morphologies	13
Effect of Te content on microstructure and thermoelectric properties of Bi–Te multilayers	13
On the wake response of a square cylinder subjected to an inline nonharmonic forcing	13
Silver molybdate nanocrystal-reinforced high-performance anti-coronavirus composite polymer coating	13
Hard magnetic properties of Fe16N2 magnets	13
Optical pump assisted broadband terahertz frequency comb	13
Simultaneous light emission and detection of an AlGaInP quantum well diode	13
Bifurcation mechanism, speed feedback controller, and hybrid controller design in a delayed tumor-immune competitive model	13
Free vibration characteristics of cord-reinforced air spring with winding formation under preload conditions	13
Long-time stable and high-performance YBa2Cu3O7 nanoSQUIDs with more interfaces	13
Numerical simulation and analysis of contact erosion by high-current and low-voltage air arc considering the movement of arc	13
Density-functional theory formulated in terms of functional integrals	13
Multi-response optimization of FSW parameters for Al–Mg–Zn alloys using Box–Behnken design and gray relational analysis and comparative study with ANFIS technique	13
Enhanced adsorption and non-linear optical properties of DNA-CTAB functionalized mesoporous silica nanoparticles and their influence on enhancement of photoluminescence of Rhodamine 6G dye	13
Effect of small-size space porous flexible PVC material on propane deflagration	13
On silicon nanobubbles in space for scattering and interception of solar radiation to ease high-temperature induced climate change	12
Heat transfer of ternary hybrid nanofluids in a rotating semi-permeable channel with melting and injection/suction	12
Measurement of mixed materials and analysis of plutonium isotope ratio based on fast neutron multiplicity	12
3D phononic Stiefel–Whitney insulator: A case study of 3D 3,42T32-type carbon allotrope (3,42T32-CA)	12
Study on the insulation performance of C5F10O gas mixture in cold climates	12
Neck shape optimization of resonator-type sound absorbers using adjoint lattice Boltzmann method	12
Evaluating the impact of air terminal geometry on lightning intercept efficacy under a strong background electric field	12
Gauge theory applied to chiral magnets	12
Research on direction of arrival estimation for mixed broadband signals	12
Investigating the influence of rheology and morphology on hemodynamics in intracranial aneurysms: A CFD study	12
Demonstration of gallium oxide nano-pillar field emitter arrays	12
Instability and ultra-high frequency spectrum pulse train in passively Q-switched Yb:LuAG ceramic laser	12
Correlating properties of alloys with constituent phases and their Raman spectra	12
Precise evaluation of the material constants of [011]-poled mangan-doped 0.32Pb(In1/2Nb1/2)O3-0.39Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 single crystals	12
Comparison between modulations of contact and channel potential in nitrogen dioxide gas response of ambipolar carbon nanotube field-effect transistors	12
Tailing phenomenon in high voltage solid-state pulse modulators: Analyzing and modeling	12
Analysis of parameter sensitivity and rainfall protection of vegetated concrete slab wall design on ecological slope	12
Electronic and magnetic properties of nearly spin-gapless semiconducting FeVTaAl and FeCrZrAl	12
Prime factorization using coupled oscillators with positive feedback	12
Straightforward synthesis of monodisperse Co/Zn-based nanoparticles and their antifungal activities on Botrytis cinerea	12
A PINN framework for inverse physical design of metal-loaded electromagnetic devices	12
3D manipulation of small multicellular organisms in soft microtubes	12
Nonlinear motion characteristics of the high-temperature superconducting levitation system with boundary crack	12
Pressure profile calculation using finite element analysis that exploits the continuity of gas flow	12
Parameter optimization of SVM algorithm for predicting physical parameters of SF6–Cu mixture plasma under local thermodynamic equilibrium	12
Phase transitions of β-ZnTe(en)0.5 under hydrostatic pressure	12
Controlled movement of lower strike points by applying a divertor coil on the EAST tokamak	12
Post-exercise evaluation based on the fusion of electrocardiography (ECG) and near-infrared spectroscopy (NIRS)	12
Analysis of mode excitation of a relativistic magnetron with azimuthal-periodic-cavity extraction	12
Influence of the Zn2+ concentration on the defect structure and optical properties in Zn:Fe:Cu:LiNbO3 crystals	12
Complex firing activities and bifurcations in memristor-coupled Hindmarsh–Rose neuron	12
Analysis of the interaction between torsion wave and phononic crystal in pipes	12
A dual wave structure triboelectric sensor for heart rate and exercise monitoring	12
Winding-MMF-based design and investigation of dual-winding hybrid-tooth vernier permanent magnet motor with reduced torque ripple and improved power factor	12
Controllable synthesis and PL propertiesof ZnO flower-like nanostructures by chemical bath method	12
Enhancement of boron nitride nanosheet/cellulose nanofiber modified laminated insulating paper	12
Rapid and automatic phenotyping of cells through their annexin-mediated enforced blebbing response	12
Tutorial on running median subtraction filter with application to searches for exotic field transients in multi-messenger astronomy	12
Study on arc extinguishing characteristics of multiple series gap under long clearances	12
Safety analysis and experimental research on the limit state of subsea pipeline by reel-lay method	12
Flashover characteristics of a droplet impacting the silicone rubber surface	12
Analysis of the high-frequency characteristics of a sine waveguide	12
Retraction: “Modeling of plasma wave propagation and crystal lattice theory based on computational simulations” [AIP Adv. 13, 045223 (2023)]	12
Interlayer hybridization in a van der Waals quantum spin-Hall insulator/superconductor heterostructure	12
Optomechanically induced transparency/absorption in a 3D microwave cavity architecture at ambient temperature	12
Resistive flexible pressure sensor based on AgNWs–MXENE sponge for robot skin	11
Loss analysis of magnetization annealed amorphous alloy replacement stator teeth	11
High-performance MTJ-based sensors for monitoring of atmospheric pollution	11
Numerical modeling of different streamer breakdown modes of gas switch under the external circuit	11
Current control and tuning in a closed HTS coil	11
The effect of anisotropic field on magnon dispersion of antiferromagnetic metal fluoride materials	11
Numerical study on the migration of drug carriers in capillaries with the immersed boundary-lattice Boltzmann method	11
Symmetry of the dissipation of surface acoustic waves by ferromagnetic resonance	11
Method for reconstruction of axisymmetric capillary wave surface topography using inverse ray-tracing of refracted laser sheet	11
Advanced hybrid MRAM based novel GPU cache system for graphic processing with high efficiency	11
Bandwidth enhancement for Ka-band metasurface antenna using bound TM10 and TE20 resonances and decoupled antiphase TM20 resonance	11
Aerospace mold profile image feature optimization method based on trajectory planning	11
Singly split single ring resonator: Fitting of lumped-element circuit model parameters and some aspects of resonator analysis and design	11