Journal of Energy Chemistry

Papers
(The TQCC of Journal of Energy Chemistry is 37. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
“Tennis racket” hydrogel electrolytes to synchronously regulate cathode and anode of zinc-iodine batteries1350
Enabling stable sodium metal cycling by sodiophilic interphase in a polymer electrolyte system419
A patterned titania nanorod array enables high fill factor in perovskite solar cells371
Can the efficiencies of simplified perovskite solar cells go higher?365
Atomic/nano-scale in-situ probing the shuttling effect of redox mediator in Na–O2 batteries320
In-situ constructed SnO2 gradient buffer layer as a tight and robust interphase toward Li metal anodes in LATP solid state batteries318
CO2-adsorbent spongy electrode for non-aqueous Li–O2 batteries246
Optimizing side chains on different nitrogen aromatic rings achieving 17% efficiency for organic photovoltaics241
Reversible phase transition poly(benzyl methacrylate)/ionic liquid electrolytes for effective overheating protection in lithium batteries235
14.46% Efficiency small molecule organic photovoltaics enabled by the well trade-off between phase separation and photon harvesting228
Polaron mobility modulation by bandgap engineering in black phase α-FAPbI3222
Pressure-induced growth of coralloid-like FeF2 nanocrystals to enable high-performance conversion cathode221
Silk fibroin-based biopolymer composite binders with gradient binding energy and strong adhesion force for high-performance micro-sized silicon anodes216
Charge redistribution caused by sulfur doping of bimetal FeCo phosphides supported on heteroatoms-doped graphene for Zn-air batteries with stable cycling214
Composite electron transport layer for efficient N-I-P type monolithic perovskite/silicon tandem solar cells with high open-circuit voltage214
Insight into demand-driven preparation of single-atomic mediators for lithium–sulfur batteries208
Influence of O–O formation pathways and charge transfer mediator on lipid bilayer membrane-like photoanodes for water oxidation204
Perovskite tandem solar cells with improved efficiency and stability204
The formation of crystalline lithium sulfide on electrocatalytic surfaces in lithium–sulfur batteries204
Promoting effect of d-band center and in-situ precipitation strategy on sulfur evolution reaction191
A small molecule based on dithieno[3,2-f:2′,3′-h]phthalimide enabling 19.22% efficiency by depressing non-radiative energy loss in ternary organic solar cells186
Built-in electric field induced by defected carbons adjacent to graphitic nitrogen valley for efficient oxygen reduction reaction and zinc-air batteries185
A hierarchical enhanced data-driven battery pack capacity estimation framework for real-world operating conditions with fewer labeled data184
Sulfur-linked carbonyl polymer as a robust organic cathode for rapid and durable aluminum batteries178
Strategies to suppress the shuttle effect of redox mediators in lithium-oxygen batteries173
Flexible molecules dedicate to release strain of inverted inorganic perovskite solar cell172
Urea-assisted mixed gas treatment on Li-Rich layered oxide with enhanced electrochemical performance169
Manipulating the local electronic structure microenvironment at the MXene interface to achieve efficient anode for vanadium redox flow battery169
Optimizing the power conversion processes in diluted donor/acceptor heterojunctions towards 19.4% efficiency all-polymer solar cells169
Turning gas hydrate nucleation with oxygen-containing groups on size-selected graphene oxide flakes167
Mitigating thermal runaway hazard of high-energy lithium-ion batteries by poison agent162
Regulating the synergy coefficient of composite materials for alleviating self-discharge of supercapacitors160
MOF-derived Co-MOF,O-doped carbon as trifunctional electrocatalysts to enable highly efficient Zn–air batteries and water-splitting159
Organic additives in all-inorganic perovskite solar cells and modules: from moisture endurance to enhanced efficiency and operational stability158
An ultrathin two-dimensional iridium-based perovskite oxide electrocatalyst with highly efficient {001} facets for acidic water oxidation158
Highly improved cyclic stability of Ni-rich/Li batteries with succinic anhydride as electrolyte additive and underlying mechanism156
Adjusting oxygen vacancies in perovskite LaCoO3 by electrochemical activation to enhance the hydrogen evolution reaction activity in alkaline condition154
Superior photovoltaics/optoelectronics of two-dimensional halide perovskites152
Beyond two-dimension: One- and zero-dimensional halide perovskites as new-generation passivators for high-performance perovskite solar cells149
Green antisolvent additive engineering to improve the performance of perovskite solar cells148
Accuracy comparison and improvement for state of health estimation of lithium-ion battery based on random partial recharges and feature engineering147
Engineering rich defects in nitrogen-doped porous carbon to boost oxygen reduction reaction kinetics147
A multifunctional electrolyte additive for zinc-ion capacitors with low temperature resistant and long lifespan144
Zonal activation of molecular carbon dioxide and hydrogen over dual sites Ni-Co-MgO catalyst for CO2 methanation: Synergistic catalysis of Ni and Co species144
Electronic modulation of MOF-engineered bimetallic phosphides for cost-effective ampere-level water splitting and continuous hydrogen production via supercapacitor integration142
Cation-vacancy induced Li+ intercalation pseudocapacitance at atomically thin heterointerface for high capacity and high power lithium-ion batteries142
A novel carbon cycle process assisted by Ni/La2O3 catalyst for enhanced thermochemical CO2 splitting141
Interface engineering of p-n heterojunction for kesterite photovoltaics: A progress review140
Stability of highly supersaturated vanadium electrolyte solution and characterization of precipitated phases for vanadium redox flow battery140
Double interface modification promotes efficient Sb2Se3 solar cell by tailoring band alignment and light harvest140
A novel approach for synthesis of expanded graphite and its enhanced lithium storage properties136
Elucidating the suppression of lithium dendrite growth with a void-reduced anti-perovskite solid-state electrolyte pellet for stable lithium metal anodes133
Thermal safety of dendritic lithium against non-aqueous electrolyte in pouch-type lithium metal batteries132
Modulated hydrocarbon distribution of gasoline deriving from butene conversion in the presence of syngas132
New insights into carbon-based and MXene anodes for Na and K-ion storage: A review132
Selenium vacancy-rich and heteroatom-doped CoSe/Mo2CT MXene prepared using ionic liquid dopants for pH-universal hydrogen evolution and flexible supercapacitors132
Efficient electrocatalytic overall water splitting and structural evolution of cobalt iron selenide by one-step electrodeposition131
Enhanced H2 permeation and CO2 tolerance of self-assembled ceramic-metal-ceramic BZCYYb-Ni-CeO2 hybrid membrane for hydrogen separation131
Enhanced chemical trapping and catalytic conversion of polysulfides by diatomite/MXene hybrid interlayer for stable Li-S batteries130
Methylene blue intercalated vanadium oxide with synergistic energy storage mechanism for highly efficient aqueous zinc ion batteries130
Defects and doping engineering towards high performance lead-free or lead-less perovskite solar cells129
Restraining migration and dissolution of transition-metal-ions via functionalized separator for Li-rich Mn-based cathode with high-energy-density128
Alcohol-dispersed polymer complex as an effective and durable interface modifier for n-i-p perovskite solar cells127
Reconstructing proton channels via Zr-MOFs realizes highly ion-selective and proton-conductive SPEEK-based hybrid membrane for vanadium flow battery125
Tuning interface mechanism of FeCo alloy embedded N,S-codoped carbon substrate for rechargeable Zn-air battery125
Classification and technical target of water electrolysis for hydrogen production125
Electrocatalytic oxygen evolution activities of metal chalcogenides and phosphides: Fundamentals, origins, and future strategies125
Optimizing the oxide support composition in Pr-doped CeO2 towards highly active and selective Ni-based CO2 methanation catalysts124
Very low Ru loadings boosting performance of Ni-based dual-function materials during the integrated CO2 capture and methanation process124
Thermal runaway and jet flame features of LIBs undergone high-rate charge/discharge: An investigation123
Data-driven short circuit resistance estimation in battery safety issues122
Dipole-dipole interactions in electrolyte to facilitate Li-ion desolvation for low-temperature Li-ion batteries122
Atomic-level coupled RuO2/BaRuO3 heterostructure for efficient alkaline hydrogen evolution reaction122
Insights into the efficient charge separation over Nb2O5/2D-C3N4 heterostructure for exceptional visible-light driven H2 evolution121
High area-capacity Mg batteries enabled by sulfur/copper integrated cathode design121
Approaches for enhancing the photocatalytic activities of barium titanate: A review119
CO2 capture costs of chemical looping combustion of biomass: A comparison of natural and synthetic oxygen carrier118
Fluorine-substituted O3-type NaNi0.4Mn0.25Ti0.3Co0.05O2−F cathode with improved rate capability and cyclic stability for sodium-ion storage at high voltage118
Rational screening of metal coating on Zn anode for ultrahigh-cumulative-capacity aqueous zinc metal batteries118
Ultrasmall Pt2Sr alloy nanoparticles as efficient bifunctional electrocatalysts for oxygen reduction and hydrogen evolution in acidic media116
Synergy mechanism of defect engineering in MoS2/FeS2/C heterostructure for high-performance sodium-ion battery115
Solid-state electrolytes for solid-state lithium-sulfur batteries: Comparisons, advances and prospects115
Regulating the electrochemical activity of Fe-Mn-Cu-based layer oxides as cathode materials for high-performance Na-ion battery114
Bimetallic ZIFs-derived electrospun carbon nanofiber membrane as bifunctional oxygen electrocatalyst for rechargeable zinc-air battery114
Rational construction and decoration of Li5Cr7Ti6O25@C nanofibers as stable lithium storage materials114
The circuitry landscape of perovskite solar cells: An in-depth analysis114
Design of ultranarrow-bandgap acceptors for efficient organic photovoltaic cells and highly sensitive organic photodetectors114
Development strategies and improved photocatalytic CO2 reduction performance of metal halide perovskite nanocrystals113
Perovskite-type lanthanum ferrite based photocatalysts: Preparation, properties, and applications113
Constructing strong interaction between Pt and CeO for boosting ammonia electrolysis based on hard-soft acid-base principle112
Deciphering the potassium storage phase conversion mechanism of phosphorus by combined solid-state NMR spectroscopy and density functional theory calculations112
Sub-2 nm mixed metal oxide for electrochemical reduction of carbon dioxide to carbon monoxide110
Combining descriptor-based analyses and mean-field modeling of the electrochemical interface to comprehend trends of catalytic processes at the solid/liquid interface110
Electronic structure modulation with ultrafine Fe3O4 nanoparticles on 2D Ni-based metal-organic framework layers for enhanced oxygen evolution reaction110
Sulfurized-polyacrylonitrile in lithium-sulfur batteries: Interactions between undercoordinated carbons and polymer structure under low lithiation110
Defective wood-based chainmail electrocatalysts boost performances of seawater-medium Zn-air batteries110
Consecutive hybrid mechanism boosting Na+ storage performance of dual-confined SnSe2 in N, Se-doping double-walled hollow carbon spheres109
Uniform zinc deposition on O,N-dual functionalized carbon cloth current collector109
MOF-derived multifunctional filler reinforced polymer electrolyte for solid-state lithium batteries108
Machine learning insights into the production and characteristics of carbon nanotubes from methane catalytic decomposition108
Niobium oxide/MXene heterostructure for simultaneous production of ammonia and energy via rechargeable Zn-N2 battery system107
Phosphonated ionomer modulates electrochemical interfaces in high temperature polymer electrolyte membrane fuel cells106
High-voltage LiCoO2 achieved by one-step in situ formed fast Li-ion and electron mixed conductor coating layer106
Review on high-temperature macroencapsulated phase change materials: Encapsulation strategy, thermal storage system, and optimization103
Engineering heterogenous catalysts for chemical CO2 utilization: Lessons from thermal catalysis and advantages of yolk@shell structured nanoreactors103
Fully-inorganic strontium incorporated CsPbI2Br perovskite solar cells with promoted efficiency and stability102
Navigating challenges and opportunities of machine learning in hydrogen catalysis and production processes: Beyond algorithm development102
Boosting selectivity and stability on Pt/BN catalysts for propane dehydrogenation via calcination & reduction-mediated strong metal-support interaction102
Doping sites modulation of T-Nb2O5 to achieve ultrafast lithium storage102
Room-temperature fast assembly of 3D macroscopically porous graphene frameworks for binder-free compact supercapacitors with high gravimetric and volumetric capacitances102
Synergistic effects of carbon doping and coating of TiO2 with exceptional photocurrent enhancement for high performance H2 production from water splitting102
Insights into efficient transition metal-nitrogen/carbon oxygen reduction electrocatalysts101
Confined synthesis of MoS2 with rich co-doped edges for enhanced hydrogen evolution performance101
Evaluation on a 400 Wh kg−1 lithium–sulfur pouch cell100
Sputtering FeCu nanoalloys as active sites for alkane formation in CO2 hydrogenation100
CoB and BN composites enabling integrated adsorption/catalysis to polysulfides for inhibiting shuttle-effect in Li-S batteries100
Development of covalent-organic frameworks derived hierarchical porous hollow carbon spheres based LiOH composites for thermochemical heat storage100
Efficient benzaldehyde photosynthesis coupling photocatalytic hydrogen evolution99
Ultrafine SnSSe/multilayer graphene nanosheet nanocomposite as a high-performance anode material for potassium-ion half/full batteries98
A critical review on composite solid electrolytes for lithium batteries: Design strategies and interface engineering98
Direct transformation of fossil carbon into chemicals: A review97
Recent advances in paired electrolysis coupling CO2 reduction with alternative oxidation reactions97
Semi-interpenetrating-network all-solid-state polymer electrolyte with liquid crystal constructing efficient ion transport channels for flexible solid lithium-metal batteries96
Effects of charging rates on LiNi0.6Mn0.2Co0.2O2 (NMC622)/graphite Li-ion cells96
Unravelling the role of the combined effect of metallic charge transfer channel and SiO overlayer in the Zr/Si-Fe2O3:Au:SiO nanorod arrays to boost photoelectrochemical water splitting96
A low temperature processable tin oxide interlayer via amine-modification for efficient and stable organic solar cells96
Call for knowledge systematization: An example from lithium ion batteries recycling95
Controllable assembling of highly-doped linked carbon bubbles on graphene microfolds94
Electronegativity-induced modulation of polysulfide adsorption in halogen-doped Ni2P to accelerate conversion kinetics for lithium-sulfur batteries94
Coupling Au with BO matrix induced by Closo-boron cluster for electrochemical synthesis of ammonia94
Surface hybrid engineering of nanodiamonds for boosting electrocatalytic hydrogen peroxide production with high efficiency and stability94
The action mechanisms and structures designs of F-containing functional materials for high performance oxygen electrocatalysis94
Simultaneous regulation of solvation shell and ion migration in morpholine-crosslinked polyacrylamide hydrogel electrolytes for durable zinc metal batteries93
Work function tuned, surface Cs intercalated BiVO4 for enhanced photoelectrochemical water splitting reactions93
Chemical surface tuning of zinc metal anode toward stable, dendrite-less aqueous zinc-ion batteries93
MXene-based hybrid materials for electrochemical and photoelectrochemical H2 generation93
Metallic vanadium trioxide intercalated with phase transformation for advanced aqueous zinc-ion batteries93
Bi nanoparticles in situ encapsulated by carbon film as high-performance anode materials for Li-ion batteries93
Stable and dendrite-free Zn anode with artificial desolvation interface layer toward high-performance Zn-ion capacitor93
Active and passive modulation of solar light transmittance in a uniquely multifunctional dual-band single molecule for smart window applications92
MIL-100(V) derived porous vanadium oxide/carbon microspheres with oxygen defects and intercalated water molecules as high-performance cathode for aqueous zinc ion battery92
Photoelectrocatalytic principles for meaningfully studying photocatalyst properties and photocatalysis processes: From fundamental theory to environmental applications92
An integrated machine learning model for accurate and robust prediction of superconducting critical temperature91
High entropy fluorides as conversion cathodes with tailorable electrochemical performance90
Mechanism of high Li-ion conductivity in poly(vinylene carbonate)-poly(ethylene oxide) cross-linked network based electrolyte revealed by solid-state NMR90
Full recycling of spent lithium ion batteries with production of core-shell nanowires//exfoliated graphite asymmetric supercapacitor90
Revealing dual capacitive mechanism of carbon cathode toward ultrafast quasi-solid-state lithium ion capacitors90
Bioinspired urchin-like murray carbon nanostructure with protection shell for advanced lithium-sulfur batteries90
Advanced flexible electrode materials and structural designs for sodium ion batteries90
Achievable dual-strategy to stabilize Li-rich layered oxide interface by a one-step wet chemical reaction towards long oxygen redox reversibility90
Photoelectrochemical CO2 electrolyzers: From photoelectrode fabrication to reactor configuration90
Enhancing BiVO4 photoanode performance by insertion of an epitaxial BiFeO3 ferroelectric layer89
Thermodynamics-directed bulk/grain-boundary engineering for superior electrochemical durability of Ni-rich cathode89
Catalytic decomposition of methane to produce hydrogen: A review89
A review on photo-, electro- and photoelectro- catalytic strategies for selective oxidation of alcohols88
Co-electrolysis of carbon dioxide and ferrous oxide in Ca-based molten salt to iron-encapsulated carbon nanotubes with enhanced microwave absorption88
High H2 selective performance of Ni-Fe-Ca/H-Al catalysts for steam reforming of biomass and plastic88
Exploring catalytic behaviors of CoS2-ReS2 heterojunction by interfacial engineering87
Carbon monoxide production using a steel mill gas in a combined chemical looping process87
Guidelines for dopant selection in Cu catalysts to promote the electrochemical CO2 reduction reaction for ethylene production87
Surface reconstruction of Se-doped NiS2 enables high-efficiency oxygen evolution reaction87
Confined Ni-In intermetallic alloy nanocatalyst with excellent coking resistance for methane dry reforming87
MOF-based quasi-solid-state electrolyte for long-life Al-Se battery87
Oxygen-doping of ZnIn2S4 nanosheets towards boosted photocatalytic CO2 reduction87
Innovative Mn3−O4−@NCA design: Leveraging Mn/O vacancies and amorphous architecture for enhanced sodium-ion storage86
How to stabilize standard perovskite solar cells to withstand operating conditions under an ambient environment for more than 1000 hours using simple and universal encapsulation86
Tailoring the interactions of heterostructured Ni4N/Ni3ZnC0.7 for efficient CO2 electroreduction86
Cobalt-embedded few-layered carbon nanosheets toward enhanced hydrogen evolution: Rational design and insight into structure-performance correlation85
Spectroscopic characterization of chain-to-ring structural evolution in platinum carbide clusters85
Artificial solid electrolyte interface layer based on sodium titanate hollow microspheres assembled by nanotubes to stabilize zinc metal electrodes85
Mechanism, modification and stability of tungsten oxide-based electrocatalysts for water splitting: A review85
A bi-functional strategy involving surface coating and subsurface gradient co-doping for enhanced cycle stability of LiCoO2 at 4.6 V84
Tungsten-substituted zeolite-regulated unsaturated cobalt atoms for robust light alkane dehydrogenation84
Unveiling the role of lithiophilic sites denseness in regulating lithium ion deposition84
Simultaneous modulation interface adsorption and H-bonds network realizing highly reversible zinc metal anodes84
Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions83
3D printing technology for rechargeable Li/Na-ion batteries83
Quantification of solvent-mediated host-ion interaction in graphite intercalation compounds for extreme-condition Li-ion batteries83
Synthesis of ternary magnetic nanoparticles for enhanced catalytic conversion of biomass-derived methyl levulinate into γ-valerolactone83
Electrochemical partial reduction of Ni(OH)2 to Ni(OH)2/Ni via coupled oxidation of an interfacing NiAl intermetallic compound for robust hydrogen evolution82
Expediting solid electrolyte synthesis: Microwave-assisted wet synthesis of halogen-rich Li-argyrodite82
Enhanced battery life prediction with reduced data demand via semi-supervised representation learning82
Wide-temperature and high-voltage Li||LiCoO2 cells enabled by a nonflammable partially-fluorinated electrolyte with fine-tuning solvation structure82
Improvement strategies for Ni-based alcohol steam reforming catalysts81
Modification of polypropylene separator with multifunctional layers to achieve highly stable sodium metal anode81
Polyethyleneimine modified Au core Rh shell nanodendrites for light-promoted nitrite reduction reaction at low concentration81
MXenes for hybrid metal-ion storage and desalination81
Boosting the kinetics of PF6− into graphitic layers for the optimal cathode of dual-ion batteries: The rehearsal of pre-intercalating Li+81
Synergistic enhancement of cathode/anode interfaces with high water-retentive organohydrogel enabling highly stable zinc ion batteries80
Strategies and methods for fabricating high quality metal halide perovskite thin films for solar cells80
High-entropy compounds for water electrolysis: insights into dynamic reconstruction behavior and its impact on oxygen evolution reaction catalysis80
Real-time monitoring of the lithiation process in organic electrode 7,7,8,8-tetracyanoquinodimethane by in situ EPR80
Upcycling of monomers derived from waste polyester plastics via electrocatalysis80
Pt-Co single atom alloy catalysts: Accelerated water dissociation and hydrogen evolution by strain regulation80
Achieving exceptional activity and durability toward oxygen reduction based on a cobalt-free perovskite for solid oxide fuel cells80
Suppressing deactivation in alkaline seawater oxygen evolution with Fe-doping induced dual-phase lattice strain in Ni/Mo nitrides80
Rational modulation of electronic structure in PtAuCuNi alloys boosts efficient electrocatalytic ethanol oxidation assisted with energy-saving hydrogen evolution79
Exploring the thermal stability of lithium-ion cells via accelerating rate calorimetry: A review79
Gallium-substituted self-pillared pentasil nanosheets combined with metal oxides for CO2 hydrogenation with enhanced selectivity of gasoline79
Deep neural network-enabled battery open-circuit voltage estimation based on partial charging data79
Chiral electrolytes for rechargeable metal batteries79
Recent progress and perspectives on Sb2Se3-based photocathodes for solar hydrogen production via photoelectrochemical water splitting79
Enabling stable 4.6 V LiCoO2 cathode through oxygen charge regulation strategy78
Unlocking high-rate O3 layered oxide cathode for Na-ion batteries via ion migration path modulation77
Thermal runaway propagation behavior of the Cell-to-Pack battery system77
Regulating dissolution chemistry of nitrates in carbonate electrolyte for high-stable lithium metal batteries77
Harnessing eco-friendly additives to manipulate zinc-ion solvation structures towards stable zinc metal batteries77
Aurivillius compound Bi5Ti3CrO15 as a visible-light-active photocatalyst for hydrogen production from water77
Constructing nanoporous Ni foam current collectors for stable lithium metal anodes77
Selective conversion of N2 to NH3 on highly dispersed RuO2 using amphiphilic ionic liquid-anchored fibrous carbon structure76
P-tuned FeN2 binuclear sites for boosted CO2 electro-reduction76
Design of ZnSe-CoSe heterostructure decorated in hollow N-doped carbon nanocage with generous adsorption and catalysis sites for the reversibly fast kinetics of polysulfide conversion76
Organophosphine ligand derived sandwich-structural electrocatalyst for oxygen evolution reaction76
Insights into the enhanced structure stability and electrochemical performance of Ti4+/F− co-doped P2-Na0.67Ni0.33Mn0.67O2 cathodes for sodium ion batteries at high voltage75
Atomic insights of electronic states engineering of GaN nanowires by Cu cation substitution for highly efficient lithium ion battery75
Vacancy defect MoSeTe embedded in N and F co-doped carbon skeleton for high performance sodium ion batteries and hybrid capacitors75
Sub-nanometer Pt2In3 intermetallics as ultra-stable catalyst for propane dehydrogenation75
For more and purer hydrogen-the progress and challenges in water gas shift reaction75
Fe saponite, a layered silicate for reversible lithium-ions storage with large diffusion coefficient75
Effect of Ni particle size on the production of renewable methane from CO2 over Ni/CeO2 catalyst75
Dielectric-ion-conductive ZnNb2O6 layer enabling rapid desolvation and diffusion for dendrite-free Zn metal batteries75
Enhancing solar-driven hydrogen evolution and wastewater remediation with hollow Pd SAs/CdS nanospheres for directional charge transfer75
Sulfonic groups functionalized Zr-metal organic framework for highly catalytic transfer hydrogenation of furfural to furfuryl alcohol75
Review of preferentially selective lithium extraction from spent lithium batteries: Principle and performance75
Improving the charge kinetics through in-situ growth of NiSe nanoparticles on g-C3N4 nanosheets for efficient hybrid supercapacitors75
Unveiling the promotion of accelerated water dissociation kinetics on the hydrogen evolution catalysis of NiMoO4 nanorods74
MOF-derived Ni3Fe/Ni/NiFe2O4@C for enhanced hydrogen storage performance of MgH274
Building ultra-stable K–Te battery by molecular regulation74
Recent advances in flexible alkaline zinc-based batteries: Materials, structures, and perspectives74
Upcycling of phosphogypsum waste for efficient zinc-ion batteries74
Boosting electrocatalytic hydrogen generation by a renewable porous wood membrane decorated with Fe-doped NiP alloys74
Dielectric polymer based electrolytes for high-performance all-solid-state lithium metal batteries74
Lithiophilicity: The key to efficient lithium metal anodes for lithium batteries73
Regulating the coordination microenvironment of atomic bismuth sites in nitrogen-rich carbon nanosheets as anode for superior potassium-ion batteries73
Molten salt synthesis, morphology modulation, and lithiation mechanism of high entropy oxide for robust lithium storage73
Dimensionality regulation in tin halide perovskite solar cells: Toward high performance and stability73
β-Cyclodextrin inducing confinement effect enabling spherical Na3V2(PO4)3 with multielectron reaction and superior performance at extreme conditions for sodium-ion batteries73
A techno-economic and life cycle assessment for the production of green methanol from CO2: catalyst and process bottlenecks73
Insight into the capacity degradation and structural evolution of single-crystal Ni-rich cathodes72
Effect of alloying on the carrier dynamics in high-performance perovskite solar cells72
Potential-dependent insights into the origin of high ammonia yield rate on copper surface via nitrate reduction: A computational and experimental study72
Advancements in transition bimetal catalysts for electrochemical 5-hydroxymethylfurfural (HMF) oxidation72
Unveiling hidden biases in machine learning feature importance72
Mechanically flexible reduced graphene oxide/carbon composite films for high-performance quasi-solid-state lithium-ion capacitors72
Unveiling the effect of amino acids on the crystallization pathways of methylammonium lead iodide perovskites72
Machine learning approaches for predicting impact sensitivity and detonation performances of energetic materials71
Rational design of stretchable and conductive hydrogel binder for highly reversible SiP2 anode71
A general synthesis of inorganic nanotubes as high-rate anode materials of sodium ion batteries71
CO2 hydrogenation to methanol promoted by Cu and metastable tetragonal Ce Zr O interface71
Unraveling the influence of interface defects on antimony trisulfide solar cells71
0.29403614997864