Frontiers of Chemical Science and Engineering

Papers
(The TQCC of Frontiers of Chemical Science and Engineering is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-02-01 to 2025-02-01.)
ArticleCitations
Boron and nitrogen co-doped porous carbon derived from sodium alginate enhanced capacitive deionization for water purification102
The role of single deformed bubble on porous foam tray with submerged orifices on the mass transfer enhancement82
Effect of noble metal nanoparticle size on C–N bond cleavage performance in hydrodenitrogenation: a study of active sites51
Kinetic study of the effect of thermal hysteresis on pyrolysis of vacuum residue50
Selective hydrodeoxygenation of guaiacol to cyclohexanol using activated hydrochar-supported Ru catalysts48
Surface modification techniques of membranes to improve their antifouling characteristics: recent advancements and developments44
Uncovering the effect of poly(ethylene-co-vinyl alcohol) molecular weight and vinyl alcohol content on morphology, antifouling, and permeation properties of polysulfone ultrafiltration membrane: therm41
Multi-effect anthraquinone-based polyimide enclosed SnO2/reduced graphene oxide composite as high-performance anode for lithium-ion battery41
Special Issue for the 14th Global Chinese Chemical Engineering Symposium40
Cobalt nanoparticle decorated N-doped carbons derived from a cobalt covalent organic framework for oxygen electrochemistry39
Discovery of cryptolepine derivatives as novel promising agents against phytopathogenic bacteria35
Enhanced activity of bimetallic Fe-Cu catalysts supported on ceria toward water gas shift reaction: synergistic effect32
Control of aluminum distribution in ZSM-5 zeolite for enhancement of its catalytic performance for propane aromatization30
Research of synthesis and neural network training on double quantum dot colorimetric fluorescent probe for freshness detection29
Extractive distillation of cycloalkane monomers from the direct coal liquefaction fraction29
Interfacial induction and regulation for microscale crystallization process: a critical review28
Simultaneous removal of total oxidizable carbon, phosphate and various metallic ions from H2O2 solution with amino-functionalized zirconia as adsorbents28
Catalytic hydrogenation of insoluble organic matter of CS2/Acetone from coal over mesoporous HZSM-5 supported Ni and Ru27
Hierarchical porous carbon derived from one-step self-activation of zinc gluconate for symmetric supercapacitors with high energy density26
Efficient oxidation of monosaccharides to sugar acids under neutral condition in flow reactors with gold-supported activated carbon catalysts26
Micromixing performance of the teethed high shear mixer under semi-batch operation25
Ultrafast-laser-treated poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) electrodes with enhanced conductivity and transparency for semitransparent perovskite solar cells25
Unravelling the bottleneck of phosphonic acid anchoring groups aiming toward enhancing the stability and efficiency of mesoscopic solar cells24
Computational catalysis on the conversion of CO2 to methane—an update22
Construction of interfacial dynamic bonds for high performance lignin/polymer biocomposites22
Flame-retardant, recyclable, and hydrothermally degradable epoxy resins and their degradation products for high-strength adhesives21
Insights into influence of aging processes on zero-valent iron modified biochar in copper(II) immobilization: from batch solution to pilot-scale investigation20
Tripotassium citrate monohydrate derived carbon nanosheets as a competent assistant to manganese dioxide with remarkable performance in the supercapacitor19
Novel lysosome-targeted anticancer fluorescent agents used in zebrafish and nude mouse tumour imaging19
Improving hole transfer of boron nitride quantum dots modified PDI for efficient photodegradation18
Diffusion process in enzyme—metal hybrid catalysts18
Rare-earth separation based on the differences of ionic magnetic moment via quasi-liquid strategy17
Single-atom catalysis: a promising avenue for precisely controlling reaction pathways17
Tuning porosity of coal-derived activated carbons for CO2 adsorption17
Newly-modeled graphene-based ternary nanocomposite for the magnetophotocatalytic reduction of CO2 with electrochemical performance16
Dendrimer-induced synthesis of porous organosilica capsules for enzyme encapsulation16
Non-isothermal kinetics and characteristics of calcium carbide nitridation reaction with calcium-based additives16
Insight into the selective separation of CO2 from biomass pyrolysis gas over metal-incorporated nitrogen-doped carbon materials: a first-principles study15
A novel silver-doped nickel oxide hole-selective contact for crystalline silicon heterojunction solar cells15
Decision support for the development, simulation and optimization of dynamic process models15
Single-Ni-atoms on nitrogenated humic acid based porous carbon for CO2 electroreduction15
Selective capture and separation of xenon and krypton using metal organic frameworks: a review15
A dual-function chemical probe for detecting erasers of lysine lipoylation15
An investigation of the CH3OH and CO selectivity of CO2 hydrogenation over Cu−Ce−Zr catalysts15
Coal-based activated carbon prepared by H2O activation process for supercapacitors using response surface optimization method15
Precursor-driven structural tailoring of iron oxychloride for enhanced heterogeneous Fenton activity15
Chemical reactions of oily sludge catalyzed by iron oxide under supercritical water gasification condition15
Synthesis, insecticidal activities and DFT study of pyrimidin-4-amine derivatives containing the 1,2,4-oxadiazole motif15
Solid-conversion synthesis of three-dimensionally ordered mesoporous ZSM-5 catalysts for the methanol-to-propylene reaction14
Novel eco-efficient reactive distillation process for dimethyl carbonate production by indirect alcoholysis of urea14
Poly(vinylidene fluoride-co-hexafluoro propylene) membranes prepared via thermally induced phase separation and application in direct contact membrane distillation14
Interface engineering for enhancing electrocatalytic oxygen evolution reaction of CoS/CeO2 heterostructures14
Zeolites for the separation of ethylene, ethane, and ethyne14
Nanofiltration for separation and purification of saccharides from biomass14
Clean production of lactic acid by selective carbon-carbon bond cleavage of biomass feedstock over a novel carbon-bismuth oxychloride photocatalyst13
Efficient acetoin production from pyruvate by engineered Halomonas bluephagenesis whole-cell biocatalysis13
Breaking the Ni loading-reducibility-dispersion dependence achieved by solid-state co-grinding13
Hierarchical porous metal-organic frameworks/polymer microparticles for enhanced catalytic degradation of organic contaminants13
Hierarchically porous cellulose nanofibril aerogel decorated with polypyrrole and nickel-cobalt layered double hydroxide for high-performance nonenzymatic glucose sensors13
Efficient removal of Cr(VI) and Pb(II) from aqueous solution by magnetic nitrogen-doped carbon13
Novel Ag-AgBr decorated composite membrane for dye rejection and photodegradation under visible light13
Impact of H2S on Hg0 capture performance over nitrogen-doped carbon microsphere sorbent: experimental and theoretical insights13
Surface engineering with ionic polymers on membranes for boron removal13
Nickel-based metal—organic framework-derived whisker-shaped nickel phyllosilicate toward efficiently enhanced mechanical, flammable and tribological properties of epoxy nanocomposites12
Activated carbon induced oxygen vacancies-engineered nickel ferrite with enhanced conductivity for supercapacitor application12
Vanadium oxide cathode with synergistic engineering of calcium-ion intercalation and polyaniline coating for high performance zinc-ion batteries12
Integrating of metal-organic framework UiO-66-NH2 and cellulose nanofibers mat for high-performance adsorption of dye rose bengal12
Synergistic effect of V and Fe in Ni/Fe/V ternary layered double hydroxides for efficient and durable oxygen evolution reaction12
Solvent-resistant porous membranes using poly(ether—ether ketone): preparation and application12
Enhanced permeability and biofouling mitigation of forward osmosis membranes via grafting graphene quantum dots12
Graphene-reinforced metal-organic frameworks derived cobalt sulfide/carbon nanocomposites as efficient multifunctional electrocatalysts12
Hierarchically porous zeolites synthesized with carbon materials as templates12
Enzyme@bismuth-ellagic acid: a versatile platform for enzyme immobilization with enhanced acid-base stability11
ZnFe2O4/BiVO4 Z-scheme heterojunction for efficient visible-light photocatalytic degradation of ciprofloxacin11
Rational design on photoelectrodes and devices to boost photoelectrochemical performance of solar-driven water splitting: a mini review11
Hyperbranched magnetic polymer: highly efficient removal of Cr(VI) and application in electroplating wastewater11
A minimized fluorescent chemosensor array utilizing carboxylate-attached polythiophenes on a chip for metal ions detection11
Self-sacrificial templating synthesis of flower-like nickel phyllosilicates and its application as high-performance reinforcements in epoxy nanocomposites10
Recent progress in the interfacial polymerization process for CO2 separation membrane fabrication10
Controllable construction of ionic frameworks for multi-site synergetic enhancement of CO2 capture10
Gold nanoparticles/single-stranded DNA-reduced graphene oxide nanocomposites based electrochemical biosensor for highly sensitive detection of cholesterol10
What makes biochar an interesting CO2 adsorbent?10
Optimizing polylactic acid: synthesis, properties, and regulatory strategies for food packaging applications10
Comparison of CO2 with H2O as the transport medium in a biomass supercritical water gasification system10
Autohydrolysis treatment of bamboo and potassium oxalate (K2C2O4) activation of bamboo product for CO2 capture utilization10
Excellent charge separation over NiCo2S4/CoTiO3 nanocomposites improved photocatalytic hydrogen production10
In-situ hydrophobic environment triggering reactive fluorescence probe to real-time monitor mitochondrial DNA damage10
The CatMath: an online predictive platform for thermal + electrocatalysis10
Latest advances in ionic liquids promoted synthesis and application of advanced biomass materials9
Power-to-chemicals: sustainable liquefaction of food waste with plasma-electrolysis9
Plastic upgrading via catalytic pyrolysis with combined metal-modified gallium-based HZSM-5 and MCM-419
A novel strategy for the construction of silk fibroin-SiO2 composite aerogel with enhanced mechanical property and thermal insulation performance9
Metal size effects over metal/zeolite bifunctional catalysts in the selective hydroalkylation of benzene9
Theoretical study on the effect of H2O on the formation mechanism of NOx precursors during indole pyrolysis9
Multiple input self-organizing-map ResNet model for optimization of petroleum refinery conversion units9
Recent progress in photocatalytic NAD(P)H regeneration for photocatalytic-enzymatic-coupling system9
Advances in catalysts and reaction systems for electro/photocatalytic ammonia production9
Ultrafine Fe-modulated Ni nanoparticles embedded within nitrogen-doped carbon from Zr-MOFs-confined conversion for efficient oxygen evolution reaction9
Fabricating sustainable lignin-derived porous carbon as electrode for high-performance supercapacitors9
Immobilization and characterization of the Lactarius deliciosus mycelia-embedded polylysine-alginate beads and their decolorization performance9
A microextraction approach for rapid extraction and separation of Mn(II) and Co(II) using saponified D2EHPA system9
Recent progress in hydrodynamic characteristics research and application of annular centrifugal extractors9
Simultaneous harvesting and cell disruption of microalgae using ozone bubbles: optimization and characterization study for biodiesel production9
Self-extinguishing and transparent epoxy resin modified by a phosphine oxide-containing bio-based derivative9
Fabrication of bimetallic Cu-Zn adsorbents with high dispersion by using confined space for gas adsorptive separation9
Electrocatalytic reduction of NO to NH3 in ionic liquids by P-doped TiO2 nanotubes9
Formation of CaCO3 hollow microspheres in carbonated distiller waste from Solvay soda ash plants8
Construction of nitrogen-doped carbon cladding LiMn2O4 film electrode with enhanced stability for electrochemically selective extraction of lithium ions8
Anti-biofouling strategies for implantable biosensors of continuous glucose monitoring systems8
Octane compositions in sulfuric acid catalyzed isobutane/butene alkylation products: experimental and quantum chemistry studies8
Heterometallic cluster-based organic frameworks as highly active electrocatalysts for oxygen reduction and oxygen evolution reaction: a density functional theory study8
Graphene-like h-BN supported polyhedral NiS2/NiS nanocrystals with excellent photocatalytic performance for removing rhodamine B and Cr(VI)8
Molybdenum disulfide@nickel phyllosilicate hybrid for improving the flame retardancy and wear resistance of epoxy composites8
Sulfur-deficient CoNi2S4 nanoparticles-anchored porous carbon nanofibers as bifunctional electrocatalyst for overall water splitting8
Boosting the direct conversion of NH4HCO3 electrolyte to syngas on Ag/Zn zeolitic imidazolate framework derived nitrogen-carbon skeleton8
In situ preparation of Ag@AgCl/Bio-veins composites and their photocatalytic activity and recyclability8
Efficient conversion of lignin to alkylphenols over highly stable inverse spinel MnFe2O4 catalysts8
Effective lateral dispersion of momentum, heat and mass in bubbling fluidized beds8
Bright future of polymerizing small-molecule acceptors in realizing high performance all-polymer solar cells8
Improving chitosan-based composite membrane by introducing a novel hybrid functional nano-hydroxyapatite with carboxymethyl cellulose and phytic acid8
Asymmetric copolyimide membranes fabricated by nonsolvent-induced phase separation for He/CH4 and He/N2 separation8
Constructing hierarchical ZSM-5 coated with small ZSM-5 crystals via oriented-attachment and in situ assembly for methanol-to-aromatics reaction7
Carbon-doped surface unsaturated sulfur enriched CoS2@rGO aerogel pseudocapacitive anode and biomass-derived porous carbon cathode for advanced lithium-ion capacitors7
Effect of different acid anions on highly efficient Ce-based catalysts for selective catalytic reduction of NO with NH37
Decoration of CdMoO4 micron polyhedron with Pt nanoparticle and their enhanced photocatalytic performance in N2 fixation and water purification7
Thermoresponsive block copolymer supported Pt nanocatalysts for base-free aerobic oxidation of 5-hydroxymethyl-2-furfural7
Cooperative effect between copper species and oxygen vacancy in Ce0.7−xZrxCu0.3O2 catalysts for carbon monoxide oxidation7
Deep eutectic solvent inclusions for high-k composite dielectric elastomers7
Optimized the vanadium electrolyte with sulfate-phosphoric mixed acids to enhance the stable operation at high-temperature7
Highly dispersed Pd nanoparticles in situ reduced and stabilized by nitrogen-alkali lignin-doped phenolic nanospheres and their application in vanillin hydrodeoxygenation7
Lignin-based electrospun nanofiber membrane decorated with photo-Fenton Ag@MIF-100(Fe) heterojunctions for complex wastewater remediation7
g-C3N4-coated MnO2 hollow nanorod cathode for stable aqueous Zn-ion batteries7
Bimetallic reduced graphene oxide/zeolitic imidazolate framework hybrid aerogels for efficient heavy metals removal7
Enabling nickel ferrocyanide nanoparticles for high-performance ammonium ion storage7
Enhanced formic acid production for CO2 photocatalytic reduction over Pd/H-TiO2 catalyst7
Dialdehyde cellulose nanocrystal cross-linked chitosan foam with high adsorption capacity for removal of acid red 1347
0.060438871383667