Journal of Electrochemical Science and Technology

Papers
(The median citation count of Journal of Electrochemical Science and Technology is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Arylamino Substituted Mercaptoimidazole Derivatives as New Corrosion Inhibitors for Carbon Steel in Acidic Media: Experimental and Computational Study110
Microwave-treated Expandable Graphite Granule for Enhancing the Bioelectricity Generation of Microbial Fuel Cells49
Ionic Additives to Increase Electrochemical Utilization of Sulfur Cathode for Li-S Batteries32
A Functional N/S-doped Carbon Electrode from a Carbonized Bagasse Activated with Water Vapor27
Review of State of Power Estimation for Li-Ion Batteries: Methods, Issues, and Prospects22
Applications and Challenges of Lithium-Sulfur Electrochemical Batteries21
Design Principles for Moisture-Tolerant Sulfide-Based Solid Electrolytes and Associated Effect on the Electrochemical Performance of All-Solid-State Battery18
Research on the effect of refined flow channel in bionic flow channel on PEMFC performance17
Thermal Behavior Simulation of Lithium Iron Phosphate Energy Storage Battery15
Combined Effect of Catholyte Gap and Cell Voltage on Syngas Ratio in Continuous CO2/H2O Co-electrolysis14
MOF-based Sensing Materials for Non-enzymatic Glucose Sensors14
Electrochemical Desalination of a 50% w/w Sodium Hydroxide Solution, a Pharmaceutical Sterilization Agent14
Highly Active Electrocatalyst based on Ultra-low Loading of Ruthenium Supported on Titanium Carbide for Alkaline Hydrogen Evolution Reaction13
Detection of Unbalanced Voltage Cells in Series-connected Lithium-ion Batteries Using Single-frequency Electrochemical Impedance Spectroscopy11
Comparative Study of Undoped and Nickel-Doped Molybdenum Oxide Photoanodes for PEC Water Splitting11
A Techno-Economic Study of Commercial Electrochemical CO2 Reduction into Diesel Fuel and Formic Acid11
A Study on Long-Term Cycling Performance by External Pressure Change for Pouch-Type Lithium Metal Batteries11
Hydroxide ion Conduction Mechanism in Mg-Al CO32− Layered Double Hydroxide10
Zn3(PO4)2 Protective Layer on Zn Anode for Improved Electrochemical Properties in Aqueous Zn-ion Batteries9
Flower-like nickel oxide/carbon nanotube nanocomposite for sensitive electrochemical detection of alfuzosin9
Mo,Cu-doped CeO2 as Anode Material of Solid Oxide Fuel Cells (SOFCs) using Syngas as Fuel9
Triallyl Borate as an Effective Separator/Cathode Interphase Modifier for Lithium-ion Batteries9
Prelithiation of Alpha Phase Nanosheet-Type VOPO4·2H2O Anode for Lithium-Ion Batteries9
Investigation of Zr doping and Electrochemical study on Li1+xTa1–xZrxSiO5 (<italic>x</italic> = 0–0.3) Solid Electrolyte for Lithium-Ion Battery8
Retraction Note: Prelithiation of Alpha Phase Nanosheet-Type VOPO4·2H2O Anode for Lithium-Ion Batteries8
Corrosion Inhibition Performance of Two Ketene Dithioacetal Derivatives for Stainless Steel in Hydrochloric Acid Solution8
Pt Catalysts Prepared via Top-down Electrochemical Approach: Synthesis Methodology and Support Effects7
Low Temperature Interface Modification: Electrochemical Dissolution Mechanism of Typical Iron and Nickel Base Alloys7
Electrochemical Impedance Spectroscopy (EIS) Performance Analysis and Challenges in Fuel Cell Applications7
Ni Foam-Supported Ni Nanoclusters for Enhanced Electrocatalytic Oxygen Evolution Reaction6
Electrochemical Capacitance of Activated Carbons Regenerated using Thermal and Chemical Activation6
Process Parameter Optimization via RSM of a PEM based Water Electrolysis Cell for the Production of Green Hydrogen6
The Investigation of COD Treatment and Energy Consumption of Urban Wastewater by a Continuous Electrocoagulation System6
Reactive Black Removal by using Electrocoagulation Techniques: An Response Surface Methodology Optimization and Genetic Algorithm Modelling Approach6
Aging Mechanisms of Lithium-ion Batteries6
Challenges and Design Strategies for Conversion-Based Anode Materials for Lithium- and Sodium-Ion Batteries6
Stabilizing Li2O-based Cathode/Electrolyte Interfaces through Succinonitrile Addition6
Exploiting Natural Diatom Shells as an Affordable Polar Host for Sulfur in Li-S Batteries6
Electrocatalysis of Selective Chlorine Evolution Reaction: Fundamental Understanding and Catalyst Design6
Empirical Capacity Degradation Model for a Lithium-Ion Battery Based on Various C-Rate Charging Conditions6
Electrochemical Oxygen Evolution Reaction on NixFe3-xO4 (0 ≤ x ≤ 1.0) in Alkaline Medium at 25ºC6
The Effect of Obstacle Number, Shape and Blockage Degree in Flow Field of PEMFC on its Performance5
Novel Li3V2-xMox(PO4)3 Electrode Material and Liquid Electrolytes for Lithium-Ion Batteries Cycled at Cryogenic Temperatures5
Carbon Monoxide Poisoning and Mitigation Strategies for Platinum Catalysts Prepared via Pulse Alternating Current Technique5
3D Hierarchical Flower-Like Cobalt Ferrite Nanoclusters-Decorated Cotton Carbon Fiber anode with Improved Lithium Storage Performance5
Effect of Carbon Fiber Layer on Electrochemical Properties of Activated Carbon Electrode5
Improvement in Cycle Characteristics using PVP Based Direct Carbon Coating During High-Rate Charge and Discharge of Li[Ni0.93Co0.07]O2 Nanofibers: Application for Lithium Secondary Batteries5
Electrochemical Degradation with Real Textile Effluent with UV Using Platinum-plated Titanium Anode5
Phosphate-decorated Pt Nanoparticles as Methanol-tolerant Oxygen Reduction Electrocatalyst for Direct Methanol Fuel Cells5
Morphology Construction of Molybdenum Doped Nickel Sulfide Electrocatalyst Induced by NH4F to Promote Hydrogen Evolution Reaction5
Dendrite-growth Suppressible Poly(ethylene)-based Separator Functionalized by Waste Oyster Shell Recycling5
Compatibility of Lithium ion Phosphate Battery in Solar off Grid Application4
Energy Efficiency Improvement of Vanadium Redox Flow Battery by Integrating Electrode and Bipolar Plate4
Variation of Li Diffusion Coefficient during Delithiation of Spinel LiNi0.5Mn1.5O44
Vertically Integrated Energy Device Sharing the Electrode of an Organic Photovoltaic Cell and a Silver-Zinc Rechargeable Battery4
Activated Carbon-Embedded Reduced Graphene Oxide Electrodes for Capacitive Desalination4
Tracing Resistances of Anion Exchange Membrane Water Electrolyzer during Long-term Stability Tests4
Embedding Cobalt Into ZIF-67 to Obtain Cobalt-Nanoporous Carbon Composites as Electrode Materials for Lithium ion Battery4
Electrochemical Determination of Chemical Oxygen Demand Based on Boron-Doped Diamond Electrode4
Effect of SO42- concentration on electrochemical corrosion behavior of PCB-Cu under thin liquid film4
Recent progress of the crystalline organic electrolytes for solid-state battery applications4
Operational Characteristics of High-Performance kW class Alkaline Electrolyzer Stack for Green Hydrogen Production4
Effect of Ramping Rate on the Durability of Proton Exchange Membrane Water Electrolysis During Dynamic Operation Using Triangular Voltage Cycling4
The Investigation of Treatment of Pistachio Processing Industrial Wastewater by Electrochemical Methods in Terms of Chemical Oxygen Demand and Total Phenol Removal3
Fabrication of a Full-Scale Pilot Model of a Cost-Effective Sodium Nickel-Iron Chloride Battery Over 40 Ah3
Electrochemical Performance of LiMn2O4 Cathodes in Zn-Containing Aqueous Electrolytes3
Mitigating Metal-dissolution in a High-voltage 15 wt% Si-Graphite‖Li-rich Layered Oxide Full-Cell Utilizing Fluorinated Dual-Additives3
Investigation of Lithium Transference Number in PMMA Composite Polymer Electrolytes Using Monte Carlo (MC) Simulation and Recurrence Relation3
Synchrotron-Based X-ray Techniques for Probing Electronic and Structural Dynamics in Energy Storage Materials3
Electrochemical Impedance Spectroscopy as a diagnostic and prognostic tool for EV batteries: A review3
Bioelectricity Generation Using a Crosslinked Poly(vinyl alcohol) (PVA) and Chitosan (CS) Ion Exchange Membrane in Microbial Fuel Cell3
An Interface Heterogeneity Study on Carbon-based Materials using Scanning Electrochemical Microscopy and Scanning Electrochemical Cell Microscopy Techniques3
Electrochemical Advanced Oxidation of Lamotrigine at Ti/DSA (Ta2O5-Ir2O5) and Stainless Steel Anodes3
Flexible Carbon-Cloth-Supported Polyaniline:Poly(4-styrene sulfonate) Electrodes for Electroosmotic Infusion Devices3
Ionic-additive Crosslinked Polymeric Sulfur Composites as Cathode Materials for Lithium-Sulfur Batteries3
Discoloration of triphenylmethane Dyes in Ethylene Glycol-Water Coolant Medium3
Morphological Modulation of TiO2 Nanotube via Optimal Anodization Condition for Solar Water Oxidation3
Carbon Particle-Doped Polymer Layers on Metals as Chemically and Mechanically Resistant Composite Electrodes for Hot Electron Electrochemistry3
Portable Amperometric Glucose Detection based on NiS/CuS Nanorods Integrated with a Smartphone Device3
Further Electrochemical Degradation of Real Textile Effluent Using PbO2 Electrode3
Pulse Electrodeposition of Polycrystalline Si Film in Molten CaCl2 Containing SiO2 Nanoparticles2
Enhancement of Quick-Charge Performance by Fluoroethylene Carbonate additive from the Mitigation of Electrode Fatigue During Normal <italic>C</italic>-rate Cycling2
Effect of Pseudomonas aeruginosa Strain ZK Biofilm on the Mechanical and Corrosion Behavior of 316L Stainless Steel and α-brass2
Nanoparticles Modified With Cationic Thiol Surfactant as Efficient Inhibitors for the Corrosion of Carbon Steel2
Incorporation of Graphitic Porous Carbon for Synthesis of Composite Carbon Aerogel with Enhanced Electrochemical Performance2
Ion Migration in Metal Halide Perovskites2
Improved Surface Plasmon Resonance Sensing Sensitivity due to an Electrochemically Potential-Induced Gold Reconstruction2
Electro-Oxidation in Combination with Biological Processes for Removal of Persistent Pollutants in Wastewater: A Review2
Elucidating Electrochemical Energy Storage Performance of Unary, Binary, and Ternary Transition Metal Phosphates and their Composites with Carbonaceous Materials for Supercapacitor Applications2
A LiPF6-LiFSI Blended-Salt Electrolyte System for Improved Electrochemical Performance of Anode-Free Batteries2
Recent Advances in Anode-free Solid-state Batteries: A Review2
Bulk Heterojunction Solar Cell using Ru Dye Attached PCBM2
One-Pot Electrochemical Synthesis of Hierarchical Porous Niobium2
Electrochemical Corrosion Behavior of Iron in Lithium-ion Battery Electrolyte2
Trapezoidal Cyclic Voltammetry as a Baseline for Determining Reverse Peak Current from Cyclic Voltammograms2
Assessment and Correlation of Saline Soil Characteristics using Electrical Resistivity2
Determination of Ascorbic Acid, Acetaminophen, and Caffeine in Urine, Blood Serum by Electrochemical Sensor Based on ZnO-Zn2SnO4-SnO2 Nanocomposite and Graphene2
Effect of Solution-treated on Electrochemical Properties of AZ91 Magnesium Alloy Anode2
Copper Recovery from Printed Circuit Boards Waste Sludge: Multi-step Current Electrolysis and Modeling2
Highly Efficient Oxygen Electrode Design for Anion-Exchange Membrane-Unitized Regenerative Fuel Cells2
Surface Engineering of GaN Photoelectrode by NH3 Treatment for Solar Water Oxidation2
Electrochemical Anodic Formation of VO2 Nanotubes and Hydrogen Sorption Property2
Progresses, Challenges and Prospects for Aluminum Anode in Aqueous Secondary Batteries2
Recent Advances in Preparation and Supercapacitor Applications of Lignin-Derived Porous Carbon: A Review2
Electrochemical Properties of Trimethylammonium Tetrafluoroborate in Electrochemical Double-Layer Capacitors2
Pt Deposits on Bi-Modified Pt Electrodes of Nanoparticle and Disk: A Contrasting Behavior of Formic Acid Oxidation2
Numerical Analysis of the Effect of a Three-Dimensional Baffle Structure with Variable Cross-Section on the Parallel Flow Field Performance of PEMFC2
The Ways for Bi on Pt to Enhance Formic Acid Oxidation2
Simple and Sensitive Electrochemical Sandwich-type Immunosensing of Human Chorionic Gonadotropin based on b-cyclodextrin Functionalized Graphene2
0.11057615280151