Buildings

Article	Citations
Sustainable Building Standards in the Galapagos Islands: Definition, Simulation, and Implementation in Representative Living Labs	234
Identifying Effective Managerial Factors in Improving and Renovating Old Urban Tissues: A Case Study Approach	188
Strength Design of Ultra-High-Performance Fiber-Reinforced Cementitious Composites Using Local Ecological Admixture	185
Application of the Coupled Markov Chain in Soil Liquefaction Potential Evaluation	157
Cyclic Responses of Two-Side-Connected Precast-Reinforced Concrete Infill Panels with Different Slit Types	154
Structural Performance of Thin-Walled Twisted Box-Section Structure	146
Construction Efficiency in Shear Strengthening of Pre-Cracked Reinforced Concrete Beams Using Steel Mesh Reinforced Strain Hardening Cementitious Composites	141
Solution of Bullet Proof Wooden Frame Construction Panel with a Built-In Air Duct	119
Thermal Performance Investigation at Different Temperature and Airflow Settings in a Conference Hall of Expo Building	110
Amplitude-Scaling Bias Analysis of Ground Motion Record Set in Strip Method for Structural Seismic Fragility Assessment	109
Peak Assessment and Driving Factor Analysis of Residential Building Carbon Emissions in China’s Urban Agglomerations	108
A Study of Member Displacement According to Seasonal Climate of the Sungnyemun Gate, a Korean Wooden Architectural Heritage Site	104
Heritage Characterisation and Preservation Strategies for the Original Shantung Christian University Union Medical College (Jinan)—A Case of Modern Mission Hospital Heritage in China	98
Energy-Based Analysis of Time-Dependent Deformations in Viscoelastic Truss Systems	95
Design and Shear Bearing Capacity Calculation of All-Welded Irregular Joints in Steel Traditional Chinese Buildings	94
Parametric Analysis of Steel Studs to Reduce Thermal Bridges in Light Steel Framing Construction Systems	91
Optimization of Anti-Scour Device Combined with Perforated Baffle and Ring-Wing Plate Based on a Multi-Factor Orthogonal Experiment	89
Research on Concrete Beam Damage Detection Using Convolutional Neural Networks and Vibrations from ABAQUS Models and Computer Vision	89
Research Progress on Features and Characteristics of Rural Settlements: Literature Distribution, Key Issues, and Development Trends	88
A Visualization Study of Highway Investment Based on Network Analysis	84
Promoting the Low-Carbon Transition of Power Construction Projects under MRV: An Evolutionary Game Analysis	83
The Effect of Bottom Reinforcement Spacers on Reinforced Concrete Structures Loaded by Explosion	82
Numerical Analysis of Different Influencing Factors on the In-Plane Failure Mode of Unreinforced Masonry (URM) Structures	80
Experimental Study on Activation Energy and Microstructure of Nano- and Micro-Sized Pozzolanic Materials as Cementitious Composite Binder	80
Force Transfer Mechanism and Behavior Insights for a Large-Diameter CFST Column to Steel Beam Connection	80

Index of Residential Development: Evaluation of the Possibility of New Residential Construction Depending on the City Plan	78
Seismic Design and Performance Evaluation of Coupled Steel Plate and Reinforced Concrete Composite Walls	77
BIM Manager Role in the Integration and Coordination of Construction Projects	77
Shear Lag Analysis of Simply Supported Box Girders Considering Axial Equilibrium and Shear Deformation	76
Experimental Vibration Analysis in the Knowledge Process of a Historic Confined Masonry Building	75
An Intelligent Natural Language Processing (NLP) Workflow for Automated Smart Building Design	73
Stress–Strain Model of High-Strength Concrete Confined by Lateral Ties under Axial Compression	72
Assessment of Photocatalytic Nano-TiO2 Mortars’ Behavior When Exposed to Simulated Indoor Conditions of Glazed Buildings	70
Analysis of Harvesting Methods of Moso Bamboo	69
Numerical Modeling of Lyapunov Exponents for Structural Damage Identification	69
On Interpolative Meshless Analysis of Orthotropic Elasticity	69
Intelligent Bridge Health Monitoring and Assessment	68
Exploring the Effect of Varying Fiber Dosages as Stirrup Substitutes in Torsion-Loaded Concrete Beams	67
Impact of Polypropylene Fiber on the Mechanical and Physical Properties of Pervious Concrete: An Experimental Investigation	67
Study on Compression Bearing Capacity of Tapered Concrete-Filled Double-Skin Steel Tubular Members Based on Heuristic-Algorithm-Optimized Backpropagation Neural Network Model	67
The Social Production of Industrial Heritage Spaces in the Background of Cultural Governance: A Comparative Study Based on Cases from Taipei and Hong Kong	66
Experimental and Numerical Study on Tensile Behavior of Double-Twisted Hexagonal Gabion Wire Mesh	66
CO2 Emission Allocation for Urban Public Buildings Considering Efficiency and Equity: An Application at the Provincial Level in China	65
Research on the Non-Planar Deformation Behavior of Reinforced Concrete Components Based on Size Effect	65
Accuracy of Non-Destructive Estimation of Length of Soil Nails	64
Technology for Treatment and Reinforcement of Soft Rock Tunnel Floor Using Sealing Material	64
Full-Scale Experimental Study on Flexural Performance of the New Precast UHPC Diaphragm Slab in Utility Tunnels	64
The Internationalization of the Turkish HVAC Industry in Germany: Drivers, Challenges, and Success Factors	63
Investigation of the Mechanical and Physical Properties of Acidic Pumice Aggregate-Reinforced Lightweight Concrete Under High-Temperature Exposure	63
Experimental and Numerical Simulation Study on Shear Performance of RC Corbel Under Synergistic Change in Inclination Angle	63
Spatiotemporal Dynamics and Driving Factors of Urban Expansion in the Chongqing Metropolitan Area Based on Nighttime Light Remote Sensing	63
Study on the Effects of Wind Direction on the Characteristics of Vortex-Induced Vibration for a Square Cylinder	62
Spatiotemporal Deformation Prediction Model for Retaining Structures Integrating ConvGRU and Cross-Attention Mechanism	60
Optimization and Evaluation of Community Smart Health Spaces: A Hybrid Model Based on a SWOT Analysis, the Four Orders of Design, AHP, and TOPSIS	60
Methodologies to Design Optimum 3D Printable Mortar Mix: A Review	60
A Cloud Model-Based Evaluation of Renovation Decisions for Old Urban Communities from the Perspective of Resilience—A Case Study of a Community in Nanjing, China	60
Construction Scheme and Influence Analysis of Horizontal Small-Clear-Distance Shield Tunnel	59
Construction of a Value Evaluation System for Fujian Tubao Architectural Heritage Based on Grounded Theory and the Analytic Hierarchy Process	59
Structural Damage Identification Using PID-Based Search Algorithm: A Control-Theory Inspired Application	59
From Dots and Lines to Connections: Re-Evaluation of Relational Thinking in Architecture	59
Research on Spatial Coordinate Estimation of Karst Water-Rich Pipelines Based on Strapdown Inertial Navigation System	58
The Use of Digital Technologies in Construction Safety: A Systematic Review	58
Construction Scheme Effects on Deformation Controls for Open-Top UBITs Underpassing Existing Stations	58
Management of Pile End Sediment and Its Influence on the Bearing Characteristics of Bored Pile	58
Shear Mechanism of Precast Segmental Concrete Beam Prestressed with Unbonded Tendons	58
Resource-Oriented Treatment Technologies for Rural Domestic Sewage in China Amidst Population Shrinkage: A Case Study of Heyang County in Guanzhong Region, Shaanxi Province	57
Exploration of Strategies for Enhancing the Quality of Urban Space Based on Multi-Source Data Fusion	57
Housing Price Modeling Using a New Geographically, Temporally, and Characteristically Weighted Generalized Regression Neural Network (GTCW-GRNN) Algorithm	57
Asphalt and Aggregate Fluorescence Tracing Based on Sensors and Ambient Parameter Optimization	56
Seismic Behavior of Composite Beam to Concrete-Filled Cold-Formed High-Strength Square Steel Tubular Column Joints with Different Connection Forms	56
Learning-Enhanced Differential Evolution for Multi-Mode Resource-Constrained Multi-Project Scheduling Problem in Industrial Prefabrication	56
Assessing Construction Safety Performance in Urban Underground Space Development Projects from a Resilience Enhancement Perspective	56
Experimental Study on the Strength Characteristics of Organic-Matter-Contaminated Red Soil in Yulin	55
Formation Mechanism and Evolutionary Laws of Well-Being at Work Among the New Generation of Construction Workers in China	55
A Study on the Calculations of the Bottom Void Range of an Underground Pipe Gallery Structure Under the Action of Ground Fissure Dislocations	55

Study on Application of Transparent Soil in Migration of Heavy Metal Pollutants in Porous Media	55
Numerical Simulation on an Ultra-Large Seven-Ring Internal Support System Considering the Effects of Soil–Structure Interaction and Temperature	54
Potential Use of Recycled Foundry Sand as Fine Aggregate in Self-Compacting Concrete: Sustainable Engineering Research	54
Bridging the Philosophy of Science and Architecture: An Analysis Through Sou Fujimoto	54
Fire Evacuation Influence Factor Analysis and Optimization Research for Comprehensive Teaching Buildings	54
Experimental Study on Evaluation of Organization Collaboration in Prefabricated Building Construction	54
BIM for Sustainable Redevelopment of a Major Office Building in Rome	54
Research on the Rapid Testing Method of Influence Lines for Beam Bridges and Its Engineering Applications	53
From Fragmentation to Collective Action: A System Dynamics–Based Approach to Addressing Stakeholder Engagement in the Building Sector’s Circular Economy Transition	53
A Flood Prevention Design for Guangzhou Metro Stations Under Extreme Rainfall Based on the SCS-CN Model	53
Factors Influencing Big Data Adoption for Sustainability in the Swedish Construction Industry: Technical, Economic, and Organizational Perspectives	53
Portugal’s Wattle and Daub Constructive Legacy	52
Seismic Performance Analysis of a New Type of Fabricated Concrete Beam–Column Joint	52
Analysis of the Upper Limit of the Stability of High and Steep Slopes Supported by a Combination of Anti-Slip Piles and Reinforced Soil Under the Seismic Effect	52
Structural Behavior Analyses and Simple Calculation of Asynchronous-Pouring Construction in PC Composite Girder Bridges with Corrugated Webs for Sustainability	52
Performance Analysis of Model-Based Control for Thermoelectric Window Frames	52
Probabilistic Safety Factor Assessment of Composite Pile Foundation Using Symmetrical FEM Reliability Method	52
Drivers for the Acceptance of Green Housing Insurance from the Perspective of House Owners	52
Assessing Drivers, Barriers and Policy Interventions for Implementing Digitalization in the Construction Industry of Pakistan	52
Buckling Characteristics of Bio-Inspired Helicoidal Laminated Composite Spherical Shells Under External Normal and Torsional Loads Subjected to Elastic Support	52
Investigation into the Distribution Features and Determinants of Underground Commercial Spaces in Qingdao City	52
The Structural Configuration and Mechanical Performance of a New Cable-Supported Reciprocal Structure	52
Adaptive Thermal Comfort Assessment in Residential Buildings Under Current and Future Mediterranean Climate Scenarios	52
The Mutual Verification of Agricultural Imagery and Granary Architecture in Ancient China: A Case Study of the Fuzhou “Room-Style” Granaries	51
Evaluating Perceptions of Cultural Heritage Creativity Using an SEM-GIS Model: A Case Study of Qingzhou Mountain, Macau	51
Simulation Study on Age-Friendly Design of Community Park Activity Spaces Based on AnyLogic: A Case Study of Qiaokou Park in Wuhan	51
Experimental Study on Compressive Behavior of CFRP-Confined Pre-Damaged Pinus sylvestris var. mongolia Composited Wooden Column	51
Theoretical and Numerical Simulation Analysis of the Axial Compressive Performance of Recycled Aggregate Concrete-Filled Steel Tubular Columns for Bridges	51
Sustainable Material Recovery from Demolition Waste: Knowledge Management and Insights from a Public Sector Building Renovation	50
Behavior of Stiffened Rafts Resting on Expansive Soil and Subjected to Column Loads of Lightweight-Reinforced Concrete Structures	50
Unseen Needs: The Imperative of Building Biology-Based Design in Educational Spaces for Individuals with Down Syndrome	50
Mitigating Blast Hazards: Experimental Evaluation of Anti-Shatter Films and Catcher-Cable Systems on Conventional Windows	50
Aging in Place in Jordan: Assessing Home Modifications, Accessibility Barriers, and Cultural Constraints	50
Longitudinal Bending Mechanical Performance of Double-O-Tube (DOT) Shield Tunnel	50
Women-Oriented Evaluation of Perceived Safety of Walking Routes between Home and Mass Transit: A Case Study and Methodology Test in Guangzhou	49
Methods for Selecting Design Alternatives through Integrated Analysis of Energy Performance of Buildings and the Physiological Responses of Occupants	49
The Influence of Integral Water Tank on the Seismic Performance of Slender Structure: An Experimental Study	49
Structural, Exterior, and Interior Medium of Wood as a Holistic Museum Experience: A Case Study of OMM (Odunpazarı Modern Museum)	49
Impact of COVID-19 on Construction Production Rate	49
A Decision Framework for the Regeneration Awareness of Large-Sized Public Housing Using a Building Transformability Assessment: A Test Case in Italy (Latina)	49
Probabilistic Evaluation Method of Wind Resistance of Membrane Roofs Based on Aerodynamic Stability	48
Unified Flexural Resistance Design Method and Evaluation Frame for the B-Regions of RC Flexural Members—Theory and Application	48
Occupants’ Thermal Adaptive Behavior Pattern in Indonesian Residential Buildings	48
Research on the Construction Method of Cultural Visiting Routes Based on the Coupling Coordination Degree Model: A Case Study of Zhongshan Road Historical and Cultural Block, Xiamen, China	48
Application of Emerging Technologies to Improve Construction Performance	48
The Domestic Acoustic Environment in Online Education—Part 2: Different Interference Perception of Sound Sources and While Conducting Academic Tasks	48
Improving School Reconstruction Projects Satisfaction Outcomes Using Fuzzy Quality Function Deployment (FQFD)	48
Research on the Mechanical Properties of Mechanically Connected Splices of Prestressing Screw Bars Under Monotonic and Cyclic Loads	48
Fracture Mode and Thermal Damage Evolution of Sandstone Under the Coupling Effect of Thermal Treatment and Impact Load	47
Effect of Natural Weathering on the Mechanical Strength of Bamboo Bio-Concrete	47
Numerical Study on the Risk of Infection in Adjacent Residential Spaces: Door Operation and the Impact of Outdoor Wind Speeds	47
Interactive Effects of Built Environment and Parking Policy on Car Use: Examining Differences Between Work and Non-Work Trips	47
Analysis of Gravel Migration Patterns During Vibration Rolling and Their Impact on GCL Performance Based on DEM	46
Seismic Performance and Optimization Design of a Post-Installed Elevator Shear Wall Structure	46
Axial Compressive Behavior of Outer Square Inner Circular Spontaneous Combustion Coal Gangue Concrete-Filled Double-Skin Steel Tubular Stub Column	46
Cellular Automata-Based Experimental Study on the Evolution of Corrosion Damage in Bridge Cable Steel Wire	45
The Influence of Social Mass Environmental Cognition on Consumption Intentions in Green Stadiums from the Perspective of CAC Modeling	45
Study on the Effect of Natural Wind on the Smoke Spread Law of Extra-Long Tunnel Fires with Inclined Shafts for Air Supply and Exhaust	45
A Survey of Data-Driven Construction Materials Price Forecasting	45
Integration of Photovoltaic Shading Device and Vertical Farming on School Buildings to Improving Indoor Daylight, Thermal Comfort and Energy Performance in Three Different Cities in China	45
Adaptive Optimization of Wind Environment in Coastal Village Spatial Forms of Western Guangdong	45
Technique and Tectonic Concepts as Theoretical Tools in Object and Space Production: An Experimental Approach to Building Technologies I and II Courses	45
Research on Work Performance of Monolithic Precast Concrete Shear Walls with Post-Cast Epoxy Resin Concrete	45
Probabilistic Prediction and Assessment of Train-Induced Vibrations Based on Mixture Density Model	45
Evolving Trends in Smart Building Research: A Scientometric Analysis	45
Study on Dynamic Factors of Damped Beam Members Under Exponential Attenuation Loading	45
HVAC Design Optimization for Pharmaceutical Facilities with BIM and CFD	45
Experimental Study on Heat Transfer Characteristics of Hollowing Defect Areas on Building Facade	44
Cyclic Void Growth Model Parameter Calibration of Q460D Steel and ER55-G Welds after Exposure to High Temperatures	44
Seismic Performance of Drop-In Anchors in Concrete under Shear and Tension	44
Streamlining Construction Operations: A Holistic Approach with A3 Methodology and Lean Principles	44
Finite Element Investigation of a Novel Cold-Formed Steel Shear Wall	44
Exploring Heritage: An In-Depth Performance Evaluation of Kenadsa’s Office Building through User Perceptions and Behaviors	43
Structural Lightweight Concrete Containing Basalt Stone Powder	43
Assessing the Impact of Climate Comfort on Labor Productivity in Hydropower Engineering Construction in Southwest China	43
Design Method for Low-Carbon Fly Ash Concrete Considering Strength, Form Removal Time, and Carbonation Durability Life	43
Big Data Adoption in the Chinese Construction Industry: Status Quo, Drivers, Challenges, and Strategies	43
Development of an Optimization-Based Budget Allocation Model for Seismic Strengthening Based on Seismic Risk Assessment	43
Design of an Instant Vibration-Based Warning System and Its Operation during Relocation Works of Historic Facades	43
Frontier Revitalisation of Industrial Heritage with Urban–Rural Fringe in China	43

The Intention of Bridge Asset Management Implementation in Indonesia	43
The Architectural Design Strategies That Promote Attention to Foster Mindfulness: A Systematic Review, Content Analysis and Meta-Analysis	43
Architectural Features and Soil Properties of Traditional Rammed Earth Houses: Eastern Croatia Case Study	43
Between Laws and Trends: Unraveling the Dynamics of Vertical Housing Units’ Development under Institutional Forces in the Brazilian Amazon	42
A Machine Learning Model to Predict the Seismic Lifecycle Behavior of a Cross-Sea Cable-Stayed Bridge	42
Empirical Fragility Analysis of Haitian Reinforced Concrete and Masonry Buildings	42
Multivariate Evaluation of Photovoltaic Utilization Potential of Primary and Secondary School Buildings: A Case Study in Hainan Province, China	42
Mechanical Properties of Fire-Damaged RC Beams Reinforced with Carbon Fiber Mesh	42
Ultra-High-Performance Alkali-Activated Concrete: Effect of Waste Crumb Rubber Aggregate Proportions on Tensile and Flexural Properties	42
Understanding Penetration Attenuation of Permeable Concrete: A Hybrid Artificial Intelligence Technique Based on Particle Swarm Optimization	42
Research on Pathology Information Management of Educational Architectural Heritage Based on Digital Technology: The Case of James Jackson Gymnasium	42
Developing a Blockchain-Based Framework for Digital Archiving of BIM Using Axiomatic Design	42
Influence of the Uplifting Mechanism of Embedded Footings on the Nonlinear Static Response of Steel Concentrically Braced Frames	42
Flexural Performance of a Continuous Circular Tube Girder Bridge	42
Brain Booster Buildings: Modelling Stair Use as a Daily Booster of Brain-Derived Neurotrophic Factor	41
Numerical Simulation of Freezing-Induced Crack Propagation in Fractured Rock Masses Under Water–Ice Phase Change Using Discrete Element Method	41
Early Age Performance of OPC-GGBFS-Concretes Containing Belite-CSA Cement Cured at Sub-Zero Temperatures	41
Mechanical Properties of Permeable Concrete Reinforced with Polypropylene Fibers for Different Water–Cement Ratios	41
Blast Loading of Small-Scale Circular RC Columns Using an Explosive-Driven Shock Tube	41
Calibration of the Length of the Plastic Hinge for Numerical Models of Reinforced Concrete Members	41
Contextual Evaluation of Risk Identification Techniques for Construction Projects: Comparative Insights and a Decision-Support Model	41
Ancient Solutions for Modern Challenges: Structural Analysis of Roman Ventilated Facade Systems	41
Study on the Performance of High-Performance Mortar (HPM) Prepared Using Sodium-Silicate-Modified Graphite Tailing Sand	41
Between Safety and Conservation—Procedure for the Assessment of Heritage Buildings Based on Historic Research	41
Combined Greening Strategies for Improved Results on Carbon-Neutral Urban Policies	40
The Effects of White versus Coloured Light in Waiting Rooms on People’s Emotions	40
Enhancing the Seismic Resilience of Steel Moment Resisting Frame with a New Precast Self-Centering Rocking Shear Wall System	40
Examination of Mixing Proportion in Self-Compacting Gangue-Based Pavement Concrete	40
Experimental and Numerical Research on the Mechanical Properties of a Novel Prefabricated Diaphragm Wall–Beam Joint	40
NIOSH Dampness and Mold Assessment Tool (DMAT): Documentation and Data Analysis of Dampness and Mold-Related Damage in Buildings and Its Application	40
Evaluation of Mineral Carbonation of Asbestos-Tex and Analysis of Airborne Asbestos Concentrations	40
Suitability of Residential Neighborhoods for Hosting Events: A Case Study of Riyadh, Saudi Arabia	40
Revealing the Driving Factors of Household Energy Consumption in High-Density Residential Areas of Beijing Based on Explainable Machine Learning	40
Theoretical Method for Calculating the Second-Order Effect and Reinforcement of Reinforced Concrete Box Section Columns	40
Design and Seismic Performance Study of Multistage Controllable Isolation Bearing for High-Speed Railway Simply Supported Beam	40
Research on Safety Resilience Evaluation Model of Data Center Physical Infrastructure: An ANP-Based Approach	40
Evaluation of Aging-Friendly Public Spaces in Old Urban Communities Based on IPA Method—A Case Study of Shouyi Community in Wuhan	40
Analysis of the Evolution Pattern and Regional Conservation of Cultural Heritage from the Perspective of Urban Sustainable Transformation: The Case of Xiamen, China	40
Experimental and Numerical Investigations on Load Capacity of SRC Beams with Various Sections	40
Developing Low-pH 3D Printing Concrete Using Solid Wastes	39
Microscopical Resource Allocation for Large-Scale Apartment Foundation Work Using Queuing Systems	39
Assessment of Construction Risks in Projects Funded by External Sources in Jordan during the COVID-19 Pandemic	39
Multi-Objective Scheduling Optimization of Prefabricated Components Production Using Improved Non-Dominated Sorting Generic Algorithm II	39
A Framework of Indicators for Assessing Team Performance of Human–Robot Collaboration in Construction Projects	39
Predicting the Properties of Polypropylene Fiber Recycled Aggregate Concrete Using Response Surface Methodology and Machine Learning	39
Correlation Analysis of Urban Road Network Structure and Spatial Distribution of Tourism Service Facilities at Multi-Scales Based on Tourists’ Travel Preferences	39
Safeguarding the Memory of Cultural Heritage: Protection and Restoration Strategies for Dong Village Settlement Architecture	39
Analysis of Multi-Stage Slope Displacement and Internal Force of Supporting Structure of Frame Prestressed Anchor Cable Support	39
Viscoelastic and Fatigue Performance of Modified Bitumen Using Polymer and Bio-Based Additives: A Comparative Study	38
Influence of the Exposure Degree on the Degradation of Facades of Buildings in Brasília—Brazil	38
Exploring Performance of Using SCM Concrete: Investigating Impacts Shifting along Concrete Supply Chain and Construction	38
How Does the Built Environment Influence Social Capital in the Community Context: The Mediating Role of Subjective Residential Satisfaction	38
A BIM-Based Model for Structural Health Monitoring of the Central Body of the Monserrate Palace: A First Approach	38
Dynamics and Decoupling Analysis of Carbon Emissions from Construction Industry in China	38
Inertial Measurement Unit- and Time Series Approach-Based Motion Trajectory Reconstruction of the Safety Rope Fastening Behaviour	38
The Relationship Between Urban Perceptions and Bike-Sharing Equity in 15-Minute Metro Station Catchments: A Shenzhen Case Study	38
An Intelligent Robotic System for Surface Defect Detection on Stay Cables: Mechanical Design and Defect Recognition Framework	38
Plastic Design of Metal Thin-Walled Cross-Sections of Any Shape Under Any Combination of Internal Forces	38
Augmented Reality Framework for Retrieving Information of Moving Objects on Construction Sites	38
Multi-Criteria Decision-Making Framework (AHP-TOPSIS): Pavement Preventive Maintenance Case Study for Ordinary National Trunk Highways	38
Household Carbon Emissions Research from 2005 to 2024: An Analytical Review of Assessment, Influencing Factors, and Mitigation Pathways	37
An Analytical Solution for Steel Plate Strengthened Circular Tunnels with Various Interface Slip Modes	37
Acoustic Performance Investigation of a CLT-Based Three-Floor Building	37
Quantitative Comparison of Geographical Color of Traditional Village Architectural Heritage Based on K-Means Color Clustering—A Case Study of Southeastern Hubei Province, China	37
Investigating the Viability of Recycling Rice Husk Ash and Plastic Bag Waste to Enhance Durability of Lightweight Concrete	37
Experimental Study on Hysteretic Performance of Steel Moment Connection with Buckling-Restrained Dog-Bone Beam Sections	37
Research on the Shear Performance of Cold-Formed Thin-Walled Steel-Glued Laminated Wood Composite Beams	37
A Bibliometric and Content Review of Carbon Emission Analysis for Building Construction	37
AI-Driven Optimization of Plastic-Based Mortars Incorporating Industrial Waste for Modern Construction	37
A SWOT/TOWS Analysis of Inventory Methods for Buildings Damaged or Might Be Damaged	37
Ecological Benefit Optimization and Design of Rural Residential Roofs Based on the “Dual Carbon” Goal	37
Innovation District Typology Classification via Performance Framework: Insights from Sydney, Melbourne, and Brisbane	36
Exploring the Impact of Collaboration on Competitive Advantage in Construction Groups	36
Investigation and Evaluation of Insolation and Ventilation Conditions of Streetscapes of Traditional Settlements in Subtropical China	36
From Audits to Projects: Evaluating New York State Policy to Encourage Home Retrofit Projects	36
Community Governance in Age-Friendly Community Regeneration—A Case Study on Installing Elevators in Old Residential Buildings	36
Neutrosophic Autocratic Multi-Attribute Decision-Making Strategies for Building Material Supplier Selection	36
Perception Evaluation and Optimization Strategies of Pedestrian Space in Beijing Fayuan Temple Historic and Cultural District	36
Detecting Damage Evolution of Masonry Structures through Computer-Vision-Based Monitoring Methods	36
A Holistic Approach to Strategic Sustainable Development of Urban Voids as Historic Urban Landscapes from the Perspective of Urban Resilience	36
Strategy for the Mix Design of Building Earthen Materials Made of Quarry By-Products	36
Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste	36
SeismicV: A Mobile Tool for Assessing the Seismic Vulnerability of Buildings	36
Revitalization of Traditional Villages Oriented to SDGs: Identification of Sustainable Livelihoods and Differentiated Management Strategies	36
Damage Evaluation of RC Bridge Columns Subjected to Close-In Explosions Considering Failure Modes	35
Strength Reduction Due to Acid Attack in Cement Mortar Containing Waste Eggshell and Glass: A Machine Learning-Based Modeling Study	35
How to Conduct Human-Centric Building Design? A Review of Occupant Modeling Methods and Applications	35
Rocking Analysis of Towers Subjected to Horizontal Forces	35
Seismic Vulnerability Assessment at an Urban Scale by Means of Machine Learning Techniques	35
Hydrogen Blending in Natural Gas Grid: Energy, Environmental, and Economic Implications in the Residential Sector	35
Using a Unique Retaining Method for Building Foundation Excavation: A Case Study on Sustainable Construction Methods and Circular Economy	35
Assessment of Reinforcement Steel–Concrete Interface Contact in Pullout and Beam Bending Tests Using Test-Fitted Cohesive Zone Parameters	35
Construction Simulation and Monitoring of the Jacking Steel Truss and Main Column of a Super High-Rise Building	35
Evaluation of the Protection of Historical Buildings in Universities Based on RCM-AHP-FCE	35
Dynamic Monitoring of Steel Beam Stress Based on PMN-PT Sensor	35