Lubricants

Article	Citations
Study on the Magnetic Contact Mechanical Properties of Polyurethane-Based Magnetorheological Elastomer Sealing Materials	200
A Multi-Parameter-Driven SC-ANFIS Framework for Predictive Modeling of Acid Number Variations in Lubricating Oils	180
Scuffing Calculation of Cylindrical Gears Facing Loss of Lubrication	97
Numerical Simulations and Experimental Validation of Squeeze Film Dampers for Aircraft Jet Engines	81
Evaluation of the Role of Lubricant Additives in Emission Control	75
Theoretical Investigations on Tribological Properties of Air Foil Thrust Bearings during Start-Up Process	74
Revisiting the Influence of Contact Length and Surrounding Medium on Metal Cutting Tribology	72
Comparative Analysis of Fully Floating and Semi-Floating Ring Bearings in High-Speed Turbocharger Rotordynamics	65
Environmentally Friendly Phosphating Treatment for Wear-Resistant and Anti-Corrosion Coating on Steel Substrate	61
Vibration Friction Investigation on the NCS of Joints of the CNC Machine Tools Considering Friction Factor	56
Vibration Analysis of the Double Row Planetary Gear System for an Electromechanical Energy Conversion System	56
Analysis of the Turbulent Lubrication of a Textured Hydrodynamic Journal Bearing	55
An Investigation of the Sequential Micro-Laser Drilling and Conventional Re-Drilling of Angled Holes in an Inconel 625 Ni-Based Alloy	54
Primary Prediction of Oil Film Cavitation Between Rotating Friction Pairs with Various Types of Surface Textures	53
Enhancement of Deep Drilling for Stainless Steels by Nano-Lubricant through Twist Drill Bits	53
Dynamic Temperature Prediction on High-Speed Angular Contact Ball Bearings of Machine Tool Spindles Based on CNN and Informer	53
Mixed EHL Problems: An Efficient Solution to the Fluid–Solid Coupling Problem with Consideration of Elastic Deformation and Cavitation	52
Theoretical and Experimental Flow Characteristics of a Large-Scale Annular Channel in Terms of Deformation Gradient, Eccentricity, and Water Compressibility	52
On the Salt Bath Cleaning Operations for Removal of Lubricants on the Surface of Titanium Alloy Aerospace Fasteners	52
Comparative Analysis of CNN and LSTM for Bearing Fault Mode Classification and Causality Through Representation Analysis	51
Friction Properties of Alumina–Silicon Carbide–Silver–Graphene Nanoplatelet Self-Lubricating Composite Prepared by SPS Technique	50
Development of Hybrid Intelligent Models for Prediction Machining Performance Measure in End Milling of Ti6Al4V Alloy with PVD Coated Tool under Dry Cutting Conditions	48
Influence of Grease Properties on False Brinelling Damage of Rolling Bearings	45
Identification and Validation of Linear Friction Models Using ANOVA and Stepwise Regression	44
Improving Wear Resistance of DLC-Coated Metal Components During Service: A Review	44

Mixed Friction in Fully Lubricated Elastohydrodynamic Contacts—Theory or Reality	44
Effect of Thermal Load Caused by Tread Braking on Crack Propagation in Railway Wheels on Long Downhill Ramps	44
Analysis of Coefficient of Friction of Deep-Drawing-Quality Steel Sheets Using Multi-Layer Neural Networks	44
Performance Characteristics of Spur Gears Hobbed under MQL, Flood Lubrication, and Dry Environments	41
Advanced Machine Learning Approaches for Predicting Machining Performance in Orthogonal Cutting Process	40
Preparation and Tribological Behavior of Nitrogen-Doped Willow Catkins/MoS2 Nanocomposites as Lubricant Additives in Liquid Paraffin	40
Novel Water-Based Biolubricants Using Choline Ionic Liquids	40
Research on Evaluation Indicator of Ice Rink and Curling Stone Motion for the 2022 Beijing Winter Olympic Games Based on Video Recognition Method	39
CFD Investigation on Oil Injection Lubrication of Meshing Spur Gears via Lattice Boltzmann Method	39
A Stress-Sensitivity-Based Process Optimization Method for Machining Thin-Walled Parts	39
Dynamic Prediction Model for Uneven Slipper Wear Under Complex Lubrication Conditions Considering Lubrication–Wear Coupling	39
Simple Laser-Induced Hexagonal Boron Nitride Nanospheres for Enhanced Tribological Performance	38
Hard-Anodized Aluminum Alloy: Wear Properties in Vegetable Oils	38
Study on Distribution of Lubricating Oil Film in Contact Micro-Zone of Full Ceramic Ball Bearings and the Influence Mechanism on Service Performance	37
Grease Film Behavior in Ball Bearings	36
Load Characteristics and Friction Torque Analysis of Triple-Row Wheel Hub Bearings	35
Investigation of the Friction and Wear Behavior of Cr-Mo-V Steel with Different Surface Treatment Processes	35
Study on Tribological Properties and Cutting Performance of Ce Element-Doped TiAlN Tool Coating	35
Pin-on-Plate vs. Pin-on-Disk Wear Tests: Theoretical and Numerical Observations on the Initial Transient Phase	34
Sustainable and Advanced Lubricating Materials for Automotive Industrial Applications	33
Determination of Local Friction Conditions in Hot Forging and Application to the Flash Section of Die in Crankshaft Forging	33
Precision Machining of Different Metals by Plasma Electrolytic Polishing: A Review for Improving Surface Smoothness and Properties	33
Criteria for Evaluating the Tribological Effectiveness of 3D Roughness on Friction Surfaces	32
Wear Prediction and Chaos Identification of Rigid Flexible Coupling Multi-Link Mechanisms with Clearance	32
Multi-Objective Optimization of Tribological Characteristics for Aluminum Composite Using Taguchi Grey and TOPSIS Approaches	31
Carbon Nanomaterial-Based Lubricants: Review of Recent Developments	31
Synthesis, Stability, and Tribological Performance of TiO2 Nanomaterials for Advanced Applications	29
Exact Model Order Reduction for the Full-System Finite Element Solution of Thermal Elastohydrodynamic Lubrication Problems	29
Topology Optimization of Textured Journal Bearings	29
Study on Ultrasonic Rolling Enhancement of TC4 and Its Tribological Characteristics Under Seawater Lubrication	28
Theoretical and Experimental Investigation of Dynamic Characteristics in Propulsion Shafting Support System with Integrated Squeeze Film Damper	28
Tribological Properties of 7A04 Aluminum Alloy Enhanced by Ceramic Coating	28
Impact of Temperature Variation on Friction Behaviour of Rare Earth-Doped Diamond-like Carbon Coatings with Ionic Liquid Lubricants	28
Effect of Pipe Wall Wear Defects on the Flow Characteristics of Slurry Shield Discharge Pipe	28
On-Line Feedback Control of Sliding Friction of Metals Lubricated by Adsorbed Boundary SDS Films	28
Thermal Error Analysis of Five-Axis Machine Tools Based on Five-Point Test Method	28
Study on the Effect of Laser Shock Angle on Surface Integrity and Wear Performance of H13 Steel	28
Experimental Study on Friction and Wear Characteristics of Hydraulic Reciprocating Rotary Seals	28
A Tribological Study of ta-C, ta-C:N, and ta-C:B Coatings on Plastic Substrates under Dry Sliding Conditions	28
Understanding the Influences of Multiscale Waviness on the Elastohydrodynamic Lubrication Performance, Part I: The Full-Film Condition	28
Effect of Argon Flow Rate on Tribological Properties of Rare Earth Ce Doped MoS2 Based Composite Coatings by Magnetron Sputtering	27
The Effects of the Lubricant Properties and Surface Finish Characteristics on the Tribology of High-Speed Gears for EV Transmissions	27
The Crucial Role of Roll Gap Lubrication in the Hot Rolling Process: A Review of Recent Studies	27
Stability and Thermal Conductivity of Mono and Hybrid Nanoparticles Dispersion in Double-End Capped PAG Lubricant	27
Non-Similar Solutions of Dissipative Buoyancy Flow and Heat Transfer Induced by Water-Based Graphene Oxide Nanofluid through a Yawed Cylinder	27
Lubrication, Friction and Wear Characteristics of Textured Surface Slipper Pairs in Axial Piston Pumps	26
Unbalance Response Analysis of a Spindle Supported on Gas Bearings: A Comparison between Different Approaches	26
Effects of Contact Characteristics on Dynamic Response of Planar Mechanical Systems with Lubricated Revolute Joint	26
A Phenomenological Model for Estimating the Wear of Horizontally Straight Slurry Discharge Pipes: A Case Study	26
Experimental Investigation of an Incremental Contact Model for Hyperelastic Solids Using an In Situ Optical Interferometric Technique	26

Drag Losses of Wet Brakes and Clutches—A Scoping Review	26
Intelligent Workshop Bearing Fault Diagnosis Method Based on Improved Convolutional Neural Network	26
Improved Tribological Properties of Epoxy Cement Reinforced with Impact-Resistant Core-Shell Structured Polymer Nanoparticles	26
An Investigation on the Effect of Mango Seed and Pongamia Oil-Based Cutting Fluids on Surface Morphology During Turning of AISI 304 Steel	25
Effect of CH4 Flow Rate on the Tribological Behaviors of TiCN Films against Si3N4 Ceramic and Steel Ball	25
Experimental Analysis of Catheter Push–Pull Forces: Effects of Vascular Curvature, Motion Speed, and Lumen Material	25
Friction and Wear of Extrusion Dies Under Extreme Transient High-Temperature Conditions in the Extrusion of a Novel Nickel-Based High-Temperature Powder Alloy	25
The Effect of Temperature and Asphaltene Content on the Lubricating Properties of Fuel Oils	25
Advanced Industrial Lubricants and Future Development Trends of Tribo-Systems for Tribological Performance Evaluation	25
Experimental Identification of the Void Fraction in a Large Hydrodynamic Offset Halves Bearing	25
Experimental Study on the Lubrication Enhancement of Slider-on-Disc Contact by Stearic Acid Adsorption under Limited Lubricant Supply	25
Investigation of Microstructural, Mechanical, and Tribological Properties of TiC and MWCNT Reinforced Hot-Pressed Scalmalloy® Hybrid Composites	25
Review of the State-of-the-Art Application of the Quantitative Structure Tribo-Ability Relationship Model of Lubricants in China	25
Influence of Sulfur-Phosphorus Additive Interaction Effects on the Performance of Roller Bearing Greases	25
Research on the Metal Sealing Performance of a Casing Head Hanger Under High-Pressure Conditions	24
Effect of Gear Body Temperature on the Dynamic Characteristics of Spiral Bevel Gears	24
Mechanical and Tribological Performance of Additively Manufactured Nanocrystalline Aluminum via Cryomilling and Cold Spray	24
Friction and Wear Properties of a Nanoscale Ionic Liquid-like GO@SiO2 Hybrid as a Water-Based Lubricant Additive	24
Dynamic Analysis of Dual Parallel Spring-Supported Tilting Pad Journal Bearing	24
Numerical Investigation of Bump Foil Configurations Effect on Gas Foil Thrust Bearing Performance Based on a Thermos-Elastic-Hydrodynamic Model	24
AsdinNorm: A Single-Source Domain Generalization Method for the Remaining Useful Life Prediction of Bearings	23
Numerical Simulation of Wheel–Rail Adhesion Under Wet Conditions and Large Creepage During Braking	23
Thermal Characteristics of Dry Gas Seal in Startup Process Considering Microscale Effects	23
Influence of Tribolayer on Rolling Bearing Fatigue Performed on an FE8 Test Rig—A Follow-up	23
Novel Tribometer for Coated Self-Lubricating Spherical Plain Bearings in a Vacuum	23
Tribological Properties of Borate-Based Protic Ionic Liquids as Neat Lubricants and Biolubricant Additives for Steel-Steel Contact	23
Investigation of Mechanical Properties of Grey Cast Irons Reinforced with Carbon Titanium Nitride (TiNC)	22
Mechanism of Inner Rail Corrugation on Large-Radius Curves in Metro Systems	22
Parametric Structure Optimization Design of High-Pressure Abrasive Water Jet Nozzle Based on Computational Fluid Dynamics-Discrete Element Method (CFD-DEM)	22
Wear Analysis of Friction Stir Processed AA7075-SiC-Graphite Hybrid Surface Composites	22
Synergistic Effect of Spark Plasma Sintering Driven Solid-Solution Phases on Scratch Resistance in Two-Dimensional Materials	22
Early-Stage Damage Diagnosis of Rolling Bearings Based on Acoustic Emission Signals Interpreted by Friction Behavior and Machine Learning	22
Synthesis, Wear and Corrosion of Novel Electrospark and Electrospark–Electrochemical Hybrid Coatings Based on Carbon Steels	22
High-Temperature Superlubricity Performance of h-BN Coating on the Textured Inconel X750 Alloy	21
Numerical Analysis of Load Capacity and Friction Torque of Eccentric Magnetorheological Fluid Seals	21
Theoretical Model Development and Mixed Lubrication Analyses of Rolling Piston Type Rotary Compressors: A Review	21
Comparison of Machining Performance of Ti-6Al-4V under Dry and Cryogenic Techniques Based on Tool Wear, Surface Roughness, and Power Consumption	21
Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling	21
Synergistic Effect of Acrylate of Dialkyl Dithiophosphoric Acid Combined with Molybdenum Dialkyl Dithiocarbamate as Additives in Gear Oil	21
High Temperature Friction and Wear Behavior of PTFE/MoS2 Composites	21
Tribological Behavior and Wear Mechanism of Ni-Nano TiO2 Composite Sintered Material at Room Temperature and 600 °C	21
Experimental Investigations on Wear in Oscillating Grease-Lubricated Rolling Element Bearings of Different Size and Type	20
Frictional Response of Reinforced Polymers under Quasistatic and Fast-Transient Dry Contact Conditions	20
Dynamic Precision and Reliability of Multi-Link Linkages with Translational Pair Clearance	20
Analysis of the Wear Mechanism and the Influence of the Chemical Composition and Repair Welds of the Pig Iron Wagon Wheels	20
Tribology in Germany: Latest Research and Development	20
An Experimental Study on the Influence of Spring Support Structures and Hydrostatic Recess Areas on the Characteristics of Hybrid Tilting Pad Bearings Lubricated by High-Pressure CO2	20
A Study on the Corrosion Resistance of a Coating Prepared by Electrical Explosion of 321 Metal Wire	20
Performance of TiSiN/TiAlN-Coated Carbide Tools in Slot Milling of Hastelloy C276 with Various Cooling Strategies	20
Preparation and Tribological Performance of Multi-Layer van der Waals Heterostructure WS2/h-BN	20
Research on Interfacial Instability Control During CO2 Displacement of Non-Newtonian Fluids	20
Friction and Wear Performances of Stainless Steel Archwires After Corrosion in Oral Care Products	20
Using the Principle of Newton’s Rings to Monitor Oil Film Thickness in CNC Machine Tool Feed Systems	20
Effects of Additives Adsorbed to Wet Clutch Disks on Their Tribological Performance Found in a Comparative Investigation	20
Microstructure and Wear Characteristics of Nickel-Based Coatings Produced via Laser Cladding on 6061 Aluminum Alloy	19
Novel Lubricant Additives in 2025	19
CPU Performance Improvement Using Novel Thermally Conductive Carbon Nano Grease	19
Modeling and Prediction of Tribological Performance of Surface Textures on Spherical Hydrostatic–Hydrodynamic Bearings	19
Research on the Relationship between Dynamic Characteristics and Friction Torque Fluctuation of CMGB under the Condition of Time-Varying Moment	19
Research on Simulation Method for Wear for Dynamic Seal in Axial Flux Hub Motor	19
Experimental Investigation on Synergetic Effects of Micro Grooves and WSe2 in Sliding Contact	19
Programmable Control of Droplets on Phase-Change Lubricant-Infused Surfaces Under Low Voltage	19
Rolling Contact Fatigue and White Etching Cracks of Bearings	19
Effect of Electron Beam Irradiation on Friction and Wear Properties of Carbon Fiber-Reinforced PEEK at Different Injection Temperatures	19
Research on RV Reducer Shaft Bearing Force and Structural Optimization	18
First-Principles Insights into Lubrication Behaviors of Gallium-Matrix Liquid Metal for Bearing Steel and Albronze Frictional Pairs	18
A Review on Magnetorheological Jet Polishing Technique for Microstructured Functional Surfaces	18
Mechanical Size Effect and Friction Size Effect in Thin-Sheet Microforming of T2 Copper Foils	18
U-Net Segmentation with Bayesian-Optimized Weight Voting for Worn Surface Analysis of a PEEK-Based Tribological Composite	18
A Novel Bearing Fault Diagnosis Framework with a Multi-Scale Feature Extraction Module and Efficient Content-Guided Attention Mechanism	18
Performance Evaluation of a Halbach Permanent Magnet Axial Protection Bearing Under Vertical Magnetic Levitation Flywheel Rotor Drop	18
Characterisation of the Contact between Cross-Country Skis and Snow: A Macro-Scale Investigation of the Apparent Contact	18
Tribological Properties of Al2O3/Graphite-Al2O3 Laminated Composites under Water Lubrication Conditions	18
RUL Prediction of Rolling Bearings Based on Fruit Fly Optimization Algorithm Optimized CNN-LSTM Neural Network	18
A Review of Nanofluid Minimum Quantity Lubrication Technology Applications in Various Machining Processes	18
Influence of Counter Surface Roughness and Lay on the Tribological Behaviour of Self-Lubricating Bearing Materials in Dry Sliding Conditions at High Contact Pressures	18
Comparative Evaluation of the Shear Adhesion Strength of Ice on PTFE Solid Lubricant	18
Deep Eutectic Solvents as Green and Novel Lubricant Additives for Castor Oil with High Tribological Performance	18
Tribology Performance of Polyol-Ester Based TiO2, SiO2, and Their Hybrid Nanolubricants	18
The Influences of Surface Texture Topography and Orientation on Point-Contact Mixed Lubrication	18

Analysis of the Tribological and Dynamic Performance of the Self-Adapting Water-Lubricated Stern Bearing	17
Fretting Friction and Wear Characteristics of the Internal Spiral Contact Steel Wires in the Hoisting Wire Rope Under Different Service Conditions	17
Surface Modification of Equipment Under Extreme Conditions by Laser-Induced Thermal and Mechanical Effects	17
Experimental Study on Thermal Elastohydrodynamic Lubrication Performance Calculation and Take-Off Speed of Thrust Bearing of Canned Motor Pump	17
Theoretical and Numerical Investigation of Reduction of Viscous Friction in Circular and Non-Circular Journal Bearings Using Active Lubrication	17
Effect of Nanodiamonds on Friction Reduction Performance in Presence of Organic and Inorganic Friction Modifiers	17
Tribo-Dynamics and Fretting Behavior of Connecting Rod Big-End Bearings in Internal Combustion Engines	17
Research on Splash Lubrication Characteristics of a Spiral Bevel Gearbox Based on the MPS Method	17
Analysis of the Load-Bearing Characteristics of Gas-Extruded Membrane Bearings Based on the Alternating Direction Implicit Method	16
Ceramic–Ceramic Hip Implants: Investigation of Various Factors Associated with Squeaking	16
Experimental Study: Bearing Degradation Caused by Electrical Currents and Voltages at Low Speeds	16
Recent Studies on Nanomaterials as Additives to Lubricants Under Electrified Conditions for Tribology: Review	16
Structural Superlubricity of Two-Dimensional Materials: Mechanisms, Properties, Influencing Factors, and Applications	16
Mechanical Properties and Tribological Behavior of Al2O3–ZrO2 Ceramic Composites Reinforced with Carbides	16
Rheological Study and FTIR Analysis of Thermally Degraded Mineral and Biodegradable Hydraulic Fluids	16
Non-Equilibrium Molecular Dynamics Simulations of Different Base Oils (Mineral and Vegetable) and an Oil Blend	16
Influence of Molecular Structure on the Physicochemical and Tribological Properties of Biolubricants: A Review	16
Limitary State of Heavy-Duty Engine Oils and Their Evaluation According to the Change of Tribological Properties during Operation	16
Effect of Grease Viscosity on Channeling Properties of Ball Bearings	16
Research on an Intelligent Classification Algorithm of Ferrography Wear Particles Based on Integrated ResNet50 and SepViT	16
Development of a Digital Model for Predicting the Variation in Bearing Preload and Dynamic Characteristics of a Milling Spindle under Thermal Effects	16
Improving theThermal and Tribological Properties of Dimethyl Silicone Oil Using Ag/CNTs Composite as Multifunctional Additive	16
Microstructure and Tribological Properties of Fe40Mn19Cr20Ni20Mo1 High-Entropy Alloy Composite-Infiltrated by Aluminum–Nitrogen	16
Identification and Regulation of Cold Rolling Interface State Based on a Novel Modified Forward Slip Model	16
Fabrication and Tribology Properties of Cr-Coated Cemented Carbide under Dry Friction Conditions	16
Cold Spray Deposition of MoS2- and WS2-Based Solid Lubricant Coatings	16
Stability Analysis of the Rotor-Journal Bearing System Considering Shear and Gaseous Cavitation	16
Statistical and Neural Network-Based Prediction of Surface Roughness and Tool Wear in AISI 1040 Steel Machining Using SiO2 Nanoparticle-Infused Pongamia pinnata Lubricant and Coolant	16
The Target Detection of Wear Particles in Ferrographic Images Based on the Improved YOLOv8	16
Towards a Standard Approach for the Twin Disc Testing of Top-Of Rail Friction Management Products	16
Optimization Design of Aerostatic Bearings with Square Micro-Hole Arrayed Restrictor for the Improvement of Stability: Theoretical Predictions and Experimental Measurements	16
Microstructure and Mechanical Properties of Laser-Clad Inconel 718 Coatings on Continuous Casting Mold Copper Plate	16
Study on Particle Wear Mechanism of Slurry Pumps Based on Computational Fluid Dynamics-Discrete Element Method Coupling	16
Development of Oleic Acid-Assisted Nanolubricants from Palm Kernel Oil for Boundary Lubrication Performance Under Extreme Pressure	16
Ensemble Deep Learning for Wear Particle Image Analysis	16
Tribocorrosion Behavior of γ′-Fe4N Nitride Layer Formed on Mild Steel by Plasma Nitriding in Chloride-Containing Solution	15
Effect of Structural Flexibility of Wheelset/Track on Rail Wear	15
The Improvement of the Wear Resistance of T15 Laser Clad Coating by the Uniformity of Microstructure	15
Tribological and Micro-Mechanical Properties of Injected Polypropylene Modified by Electron Radiation	15
Elastohydrodynamic Lubrication of Compliant Circular Contacts near Glass-Transition Temperature	15
Theoretical Evaluation of Lubrication Performance of Thrust-Type Foil Bearings in Liquid Nitrogen	15
Analysis of Thermo-Hydrodynamic Lubrication of Three-Lobe Semi-Floating Ring Bearing Considering Temperature–Viscosity Effect and Static Pressure Flow	15
Rotordynamic System-Level Effects of Three-Lobe Journal Bearings Including Manufacturing Variations	15
Effect of Friction Reducers with Unreinforced PEEK and Steel Counterparts in Oil Lubrication	15
Effect of Layer Exposure Time in SLA-LCD Printing on Surface Topography, Hardness and Chemical Structure of UV-Cured Photopolymer	15
Influence of Si3N4 on the Dry Sliding Wear Characteristics of Stir-Cast Cu-10Sn/xSi3N4 Metal Matrix Composite for Bearing Applications	15
Investigation of the Rheological Behaviour of Three Industrial Lubricants at High Shear Rates and Pressures	15
Enhanced Tribological Performance of Melamine Long-Chain Alcohol Esters in High-Temperature Boundary Lubrication	15
Effect of Y on Microstructure and Properties of Al0.8FeCrCoNiCu0.5 High Entropy Alloy Coating on 5083 Aluminum by Laser Cladding	15
Simulation Study of the Effect of Oil Injection Speed on the Air Curtain of High-Speed Bearings	15
Calculation and Analysis of Equilibrium Position of Aerostatic Bearings Based on Bivariate Interpolation Method	15
Static Characteristics of a Micro Bidirectional Rotating Thrust Bearing with Novel Herringbone Grooves	15
Tribocorrosive Aspects of Tungsten Carbide, Silicon Nitride, and Martensitic Steel under Fretting-like Conditions	15
A Comparison of the Tribological Properties of Two Phosphonium Ionic Liquids	15
Effect of Substrate Bias on the Structure and Tribological Performance of (AlTiVCrNb)CxNy Coatings Deposited via Graphite Co-Sputtering	15
Synthesis of Multi-butylnaphthalene Base Oils Catalyzed by Trifluoromethanesulfonic Acid and Its Lubricating Properties	15
Influence of a Walnut Shell Biochar Additive on the Tribological and Rheological Properties of Vegetable Lubricating Grease	15
RUL Prediction Method for Tools Based on Multi-Channel CNN and Cross-Modal Transformer	15
Bidirectionally Coupled FE-CFD Simulation Study on MQL Machining Process of Ti-6Al-4V Alloy	15
Deterioration Mechanism and Status Prediction of Hydrocarbon Lubricants under High Temperatures and Humid Environments	14
Tribological, Oxidation and Thermal Analysis of Advanced Microwave–Hydrothermal Synthesised Ti3C2Tx MXene as Additives in Outboard Engine Oil	14
Development of Doped Carbon Quantum Dot-Based Nanomaterials for Lubricant Additive Applications	14
Impact of Boron-Containing Lubricant Additive on Three-Way Catalyst Reactivity and Physicochemical Properties	14
Crushing Removal Conditions and Experimental Research on Abrasive Water Jets Impacting Rock	14
Improving the Surface Integrity and Tribological Behavior of a High-Temperature Friction Surface via the Synergy of Laser Cladding and Ultrasonic Burnishing	14
Temperature Characteristics of Axle-Box Bearings Under Wheel Flat Excitation	14
The Impact of Surface Roughness on the Friction and Wear Performance of GCr15 Bearing Steel	14
Mechanism of Grinding Surface Integrity Effects on Wear Resistance of Gray Cast Iron Materials	14
Machine Learning-Based Predictive Model to Assess Rheological Dynamics of Eco-Friendly Oils as Biolubricants Enriched with SiO2 Nanoparticles	14
The Twelve Principles of Green Tribology: Studies, Research, and Case Studies—A Brief Anthology	14
The Effect of Ethanol Fuel-Diluted Lubricants on the Friction of Oil Control Ring Conjunction: A Combined Analytical and Experimental Investigation	14
Lubrication Performance of Sunflower Oil Reinforced with Halloysite Clay Nanotubes (HNT) as Lubricant Additives	14
Mechanistic Interpretation of Fretting Wear in Z10C13 Steel Under Displacement–Load Coupling	14
Effects of Gold Mine Tailings as an Additive on the Tribological Performance of Lubricating Polyurea Grease	14
Tribological Behaviour of Hypereutectic Al-Si Composites: A Multi-Response Optimisation Approach with ANN and Taguchi Grey Method	14
Fundamental Structure–Function Relationships in Vegetable Oil-Based Lubricants: A Critical Review	14
Real-Time Prediction of Pressure and Film Height Distribution in Plain Bearings Using Physics-Informed Neural Networks (PINNs)	14
Prediction Method and CFD Analysis of Windage Power Loss for Aerospace High-Speed Herringbone Gear Pair	14
‘Triangle Ester’ Molecules as Blending Components in Mineral Oil: A Theoretical and Experimental Investigation	14
Study on the Wear Performance and Wear Prediction of Leaf Spring Calipers under Lubricating Medium Conditions	14
Tribological Evaluation of Brake Materials with Silk and Grewia optiva Natural Fibers	14
Analysis of Modified Finite Length Journal Bearing under Position Perturbation	14
Mechanical and Tribological Behaviour of Surface-Graphitised Al-1100 Alloy	14
Oil Change Interval Evaluation of Gearbox Used in Heavy-Duty Truck E-Axle with Oil Analysis Data	14
Machine Learning for Film Thickness Prediction in Elastohydrodynamic Lubricated Elliptical Contacts	14
Research on an Improved Auxiliary Classifier Wasserstein Generative Adversarial Network with Gradient Penalty Fault Diagnosis Method for Tilting Pad Bearing of Rotating Equipment	13
Theoretical and Experimental Investigation of the Thermal Stability of a Cycloid Speed Reducer	13
Physical Analysis of Thermophoresis and Variable Density Effects on Heat Transfer Assessment along a Porous Stretching Sheet and Their Applications in Nanofluid Lubrication	13
Evaluating the Tribological Behaviour in Cutting Operations Using a Modified Ball-on-Disc Open Tribotester	13
Polymer Dispersion Effects on Drag, Heat Transfer, and Mass Transfer in Non-Newtonian Based Nanofluids	13
Influence of Additives Concentration on the Electrical Properties and the Tribological Behaviour of Three Automatic Transmission Fluids	13
Contact of Rough Surfaces: An Incremental Model Accounting for Strain Gradient Plasticity	13
A Comparative Machinability Study of SS 304 in Turning under Dry, New Micro-Jet, and Flood Cooling Lubrication Conditions	13
Reliability Assessment of Spherical Assembly Mechanical Seals in Turbo Pumps	13
Modeling and Analysis of the Eccentric-Load Resistance of Single Rectangular Hydrostatic Oil Pad Units	13