Polymers

Article	Citations
Effects of Propylene Carbonate on the Properties of Epoxy Resin/Carbon Fiber Multilayer Material Used for Underwater Artifact Extraction	731
Ketorolac Loaded Poly(lactic-co-glycolic acid) Coating of AZ31 in the Treatment of Bone Fracture Pain	699
Inverse Finite Element Approach to Identify the Post-Necking Hardening Behavior of Polyamide 12 under Uniaxial Tension	429
Study of Styrene Butadiene Rubber Reinforced by Polybutadiene Liquid Rubber-Modified Silica	419
Reusable Macroporous Oil Sorbent Films from Plastic Wastes	405
Research Progress of Thermally Conductive Rubber Composites for Tire Heat Dissipation	389
Improving Mechanical, Electrical and Thermal Properties of Fluororubber by Constructing Interconnected Carbon Nanotube Networks with Chemical Bonds and F–H Polar Interactions	359
Removal of Calcareous Concretions from Marine Archaeological Ceramics by Means of a Stimuli-Responsive Hydrogel	347
Correction: Al-Harrasi et al. Development and Characterization of Chitosan and Porphyran Based Composite Edible Films Containing Ginger Essential Oil. Polymers 2022, 14, 1782	343
Dual-Shell Microcapsules for High-Response Efficiency Self-Healing of Multi-Scale Damage in Waterborne Polymer–Cement Coatings	326
Laser Joining of Continuous Carbon Fiber-Reinforced PEEK and Titanium Alloy with High Strength	308
Development of Short Jute Fiber-Reinforced Thermoplastic Pre-Preg Tapes	296
A Sustainable Approach to a Cleaner Production of Antimicrobial and Biocompatible Protein Fibers	288
Polymers and Nanotechnology for Industry 4.0	274
Natural Antibacterial Compounds with Potential for Incorporation into Dental Adhesives: A Systematic Review	271
Pyrolyzed Biomass Filler for PLA-Based Food Packaging	248
Polymer Supercritical CO2 Foaming under Peculiar Conditions: Laser and Ultrasound Implementation	234
Triblock Copolymer Compatibilizers for Enhancing the Mechanical Properties of a Renewable Bio-Polymer	228
Study on Fabrication and Properties of Polyvinyl Alcohol/Chitosan Nanofibers Created from Aqueous Solution with Acetic Acid and Ethanol by the Electrospinning Method	219
Study on the Microscopic Mechanism and Performance of TPU/SBR Composite-Modified Asphalt	215
Experimental Study on the Transport Properties of 12 Novel Deep Eutectic Solvents	211
Fracture Resistance and Microleakage around Direct Restorations in High C-Factor Cavities	209
Study of the Reinforcing Effect and Antibacterial Activity of Edible Films Based on a Mixture of Chitosan/Cassava Starch Filled with Bentonite Particles with Intercalated Ginger Essential Oil	208
Bottlebrush Elastomers with Crystallizable Side Chains: Monolayer-like Structure of Backbones Segregated in Intercrystalline Regions	206
Analyzing Sustainable 3D Printing Processes: Mechanical, Thermal, and Crystallographic Insights	197

Damage Monitoring of Regularly Arrayed Short-Fiber-Reinforced Composite Laminates under Tensile Load Based on Acoustic Emission Technology	195
Flow Disturbance Characterization of Highly Filled Thermoset Injection Molding Compounds behind an Obstacle and in a Spiral Flow Part	188
Preparation and Characterization of Guaiacol-Furfuramine Benzoxazine and Its Modification of Bisphenol A-Aniline Oxazine Resin	187
Advanced Protective Films Based on Binary ZnO-NiO@polyaniline Nanocomposite for Acidic Chloride Steel Corrosion: An Integrated Study of Theoretical and Practical Investigations	182
Phosphorous-Based, Halogen-Free Flame Retardants for Thin, Flexible Polyurethane Artificial Leathers	181
The Mechanism of Anticorrosion Performance and Mechanical Property Differences between Seawater Sea-Sand and Freshwater River-Sand Ultra-High-Performance Polymer Cement Mortar (UHPC)	181
Characterization and Antifungal Activity of Lemongrass Essential Oil-Loaded Nanoemulsion Stabilized by Carboxylated Cellulose Nanofibrils and Surfactant	181
Hydrogel: A Potential Material for Bone Tissue Engineering Repairing the Segmental Mandibular Defect	178
Fabrication of Highly Sensitive Porous Polydimethylsiloxane Pressure Sensor Through Control of Rheological Properties	177
Evaluating the Electromagnetic Shielding of Continuous Carbon Fiber Parts Produced by Additive Manufacturing	177
Spatiotemporal Temperature Distribution of NIR Irradiated Polypyrrole Nanoparticles and Effects of pH	174
Bonding Performance at the Interface of Glass Fiber-Reinforced Polymer Anchors and Polymer Concrete	174
Loop and Bridge Conformations of ABA Triblock Comb Copolymers: A Conformational Assessment for Molecular Composites	171
The Effect of Different Dosages of TESPT on Metal Friction and Metal Wear in the Mixing Process	169
Obtaining Ultrafine Dispersions of Silver Particles in Poly(vinyl Alcohol) Matrix Using Mechanical Alloying	168
Adsorption of Wormlike Chains onto Partially Permeable Membranes	168
A Functionalized Polysaccharide from Sphingomonas sp. HL-1 for High-Performance Flocculation	166
Interactive Coupling Relaxation of Dipoles and Wagner Charges in the Amorphous State of Polymers Induced by Thermal and Electrical Stimulations: A Dual-Phase Open Dissipative System Perspective	164
Thioether-Containing Zirconium(Alkoxy)Siloxanes: Synthesis and Study of Dielectric and Mechanical Properties of Silica-Filled Polydimethylsiloxane Compositions Cured by Them	164
Effect of the Interplay between Polymer–Filler and Filler–Filler Interactions on the Conductivity of a Filled Diblock Copolymer System	162
Palladium Nanoparticle-Loaded Mesostructural Natural Woods for Efficient Water Treatment	156
Chemical Feedback in Templated Reaction-Assembly of Polyelectrolyte Complex Micelles: A Molecular Simulation Study of the Kinetics and Clustering	154
Self-Oscillating Liquid Crystal Elastomer Helical Spring Oscillator with Combined Tension and Torsion	150
Controlling the Fiber Stress Distribution with Variable-Frequency Step Roll for Tunable Spun Yarn Structures	148
Mechanical Properties of Latex-Modified Cement Stone under Uniaxial and Triaxial Cyclic Loading	148
Impact of Temperature, pH, Electrolytes, Approach Speed, and Contact Area on the Coalescence Time of Bubbles in Aqueous Solutions with Methyl Isobutyl Carbinol	147
Tailoring/Tuning Properties of Polyester Urea-Urethanes through Hybridization with Titania Obtained Using the Sol–Gel Process	147
From Several Puck-like Inter-Fiber Failure Criteria to Longitudinal Compressive Failure: An Extension and Application for UD Composites	145
Graphene Oxide-Enriched Polymer: Impact on Dental Pulp Cell Viability and Differentiation	144
Theoretical Modeling of a Bionic Arm with Elastomer Fiber as Artificial Muscle Controlled by Periodic Illumination	144
Prediction and Interpretability Study of the Glass Transition Temperature of Polyimide Based on Machine Learning and Molecular Dynamics Simulations	142
Enhancement of Magnetoelectric Effect in Layered Polymer Composites by Zn2+ and Ni2+ Substitution in CoFe2O4 Nanoparticles	141
4-Iodobenzonitrile as Effective Solid Additive for High-Efficiency Polymer Solar Cells	141
Electropolymerization of 5-Indolylboronic Acid: Morphological, Spectroscopic, and Electrochemical Characterization with Perspective Toward Functional Applications	140
Enhancing Jabon (Anthocephalus cadamba) Laminated Board Properties with Impregnation of Citric Acid, Boric Acid, and Polystyrene	137
Description of Gas Transport in Polymers: Integrated Thermodynamic and Transport Modeling of Refrigerant Gases in Polymeric Membranes	136
Rheology, Spinnability, and Fiber Properties of AB-Benzimidazole Solutions in Polyphosphoric Acid	135
Principles and Practical Steps of Simplifying the Construction of the Cushion Curves of Closed-Cell Foam Materials	134
Prediction of Fatigue Life of Polyetherimide/Carbon Fiber Particulate Composites at Various Maximum Stresses and Filler Contents	132
Global Sensitivity Analysis of Factors Influencing the Surface Temperature of Mold during Autoclave Processing	132
Investigation on the Photodegradation Stability of Acrylic Acid-Grafted Poly(butylene carbonate-co-terephthalate)/Organically Modified Layered Zinc Phenylphosphonate Composites	131
Sugarcane-Based Polyethylene Biocomposite Reinforced with Organophilic Montmorillonite Clay: Experimental Characterization and Performance Evaluation	130
Prediction of the Specific Energy of Supercapacitors with Polymeric Materials Using Advanced Molecular Dynamics Simulations	130
Recycling of Bovine Hair Waste Through the Design of a Compatibilizing Agent for Sustainable Thermoplastic Starch-Untreated Bovine Hair Composites	130
Analysis of the Resistance Change of Chemosensitive Layers to the Presence of Ammonia Vapors under Variable Conditions of Air Temperature and Humidity	130
An Easy-to-Handle Route for Bicomponent Porous Tubes Fabrication as Nerve Guide Conduits	130
Unveiling the Mechanics Behind Polyimide’s Friction-Greening Phenomenon	125
Double Hydrophilic Hyperbranched Copolymer-Based Lipomer Nanoparticles: Copolymer Synthesis and Co-Assembly Studies	123
In Situ Formation of Acidic Comonomer during Thermal Treatment of Copolymers of Acrylonitrile and Its Influence on the Cyclization Reaction	122
Agarose-Based Hydrogel Film with Embedded Oriented Photonic Nanochains for Sensing pH	121

In Vivo Durability of Polyurethane Insulated Implantable Cardioverter Defibrillator (ICD) Leads	121
Vapor Pressure and Evaporation Studies of Saline Solutions on Natural and Synthetic Fabrics for Industrial Water Treatment	121
Synthesis of Monodisperse Mesoporous Carbon Spheres/EPDM Rubber Composites and Their Enhancement Mechanical Properties	120
Study on the Melt Rheological Characterization of Micro-Tube Gas-Assisted Extrusion Based on the Cross-Scale Viscoelastic Model	120
Expansion Injection Molding Process Using Clamping Force for Melt Compression	119
Investigation of an Optimal Material Addition Rate for Energy Consumption and Dimensional Accuracy in Fused Filament Fabrication of CFR-PEEK	118
Novel Rhinological Application of Polylactic Acid—An In Vitro Study	118
Fabrication and Characterization of Poly(hydroxybutyrate)- and Poly(caprolactone)-Based Active Biodegradable Films Incorporating Allyl Isothiocyanate	118
Investigation on Properties of Raw and Alkali Treated Novel Cellulosic Root Fibres of Zea Mays for Polymeric Composites	118
Methyltrimethoxysilane Vapor Deposition Strategy for Preparing Superelastic and Hydrophobic Flexible Polyurethane Foams	118
Functionalized Biopolymer for Enhanced Pt(IV) Recovery from Aqueous Solutions	118
The Effect of Acidic Immersion Media on the Flexural Properties of a High-Performance Fiber-Reinforced CAD/CAM Technopolymer	117
Sulfated Polysaccharides from Macroalgae—A Simple Roadmap for Chemical Characterization	117
Improved Polymer Membrane for Textile Zinc-Ion Capacitor	116
In Silico Polymerisation and Characterisation of Auxetic Liquid Crystalline Elastomers Using Atomistic Molecular Dynamics Simulations	114
Resveratrol-Loaded Polydimethylsiloxane–Silica Hybrid Materials: Synthesis, Characterization, and Antitumoral Activity	112
Characterization of the Polyetheretherketone Weldment Fabricated via Rotary Friction Welding	111
Modeling and Optimization of Properties of the Environmentally Clean Molds Based on Oligofurfuryloxysiloxanes for the Production the Metal Castings	111
Ionomeric Nanofibers: A Versatile Platform for Advanced Functional Materials	111
Protective Effect of Sargassum fusiforme Fucoidan against Ethanol-Induced Oxidative Damage in In Vitro and In Vivo Models	110
Nanomaterials from Textile Waste for Purification and Environmental Applications	110
Chitosan/Virgin Coconut Oil-Based Emulsions Doped with Photosensitive Curcumin Loaded Capsules: A Functional Carrier to Topical Treatment	110
Synergy in Aqueous Systems Containing Bioactive Ingredients of Natural Origin: Saponin/Pectin Mixtures	110
Direct Acrylation of Soybean Oil and the Influence of the Acrylation Degree on Waterborne Acrylic Systems	109
Mannans as Multifunctional Biopolymers: Structure, Properties, and Applications in Health and Industry	109
Axial Compressive Properties of Fiber-Reinforced Polymer–High-Water Material–Polyvinyl Chloride Plastic Double-Wall Hollow Column	109
Research on Temperature-Switched Dopamine Electrochemical Sensor Based on Thermosensitive Polymers and MWCNTs	109
Efficient All-Polymer Solar Cells with Sequentially Processed Active Layers	108
Hydrocarbon Resin-Based Composites with Low Thermal Expansion Coefficient and Dielectric Loss for High-Frequency Copper Clad Laminates	108
High-Performance Dual-Redox-Mediator Supercapacitors Based on Buckypaper Electrodes and Hydrogel Polymer Electrolytes	108
Stab-Resistant Polymers—Recent Developments in Materials and Structures	107
Coupled Mechanical/Dielectric Behavior of Bio-Modified PP/PBS Nanocomposites Reinforced with Organically Modified Montmorillonite	107
Combination of Cellulose Derivatives and Chitosan-Based Polymers to Investigate the Effect of Permeation Enhancers Added to In Situ Nasal Gels for the Controlled Release of Loratadine and Chlorphenira	107
Chitosan/Alginate Polymeric Nanoparticle-Loaded α-Mangostin: Characterization, Cytotoxicity, and In Vivo Evaluation against Breast Cancer Cells	106
Robust CA-GO-TiO2/PTFE Photocatalytic Membranes for the Degradation of the Azithromycin Formulation from Wastewaters	106
A Novel and Green Method for Preparing Highly Conductive PEDOT:PSS Films for Thermoelectric Energy Harvesting	106
Effect of Number of Tests on the Mechanical Characteristics of Agave sisalana Yarns for Composites Structures: Statistical Approach	106
Analysis of Fuel Alternative Products Obtained by the Pyrolysis of Diverse Types of Plastic Materials Isolated from a Dumpsite Origin in Pakistan	106
Evaluation of the UV Protection Properties of Para-Aramid Woven Fabrics with Various Specialty Core Yarns	105
Melting Behavior of Compression Molded Poly(ester amide) from 2,5-Furandicarboxylic Acid	105
Incorporation of Poly(Ionic Liquid) with PVDF-HFP-Based Polymer Electrolyte for All-Solid-State Lithium-Ion Batteries	105
Study on the Optimization of FDM Parameters for the Manufacture of Three-Point Bending Specimens from PETG and Recycled PETG in the Context of the Transition to the Circular Economy	104
Pectin Hydrogels as Structural Platform for Antibacterial Drug Delivery	103
Mimicking Alveolar Lung Structures with Lattice Designs	103
Role of Substrate Type in the Process of Polyelectrolyte Multilayer Formation	103
Recent Trends in Polymeric Foams and Porous Structures for Electromagnetic Interference Shielding Applications	102
Enhanced Tribological and Mechanical Properties of Copper-Modified Basalt-Reinforced Epoxy Composites	102
A Study of Thin Films Based on Polylactide and Vanillic Acid-Crucial Properties Relevant to Packaging	102
Prediction of Rheological Properties of PVA Fiber and Nano-SiO2-Reinforced Geopolymer Mortar Based on Back Propagation Neural Network Model Optimized by Genetic Algorithm	102
The Impacts of Bio-Based and Synthetic Hydrogels on Soil Hydraulic Properties: A Review	102
Water−Processed Organic Solar Cell with Efficiency Exceeding 11%	101
Tissue Engineering with Stem Cell from Human Exfoliated Deciduous Teeth (SHED) and Collagen Matrix, Regulated by Growth Factor in Regenerating the Dental Pulp	101
Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities	101
Surface Chemistry and Molecular Dynamics of Epoxy Resin: Insights from Analysis During Curing and Post-Curing Processes	101
Porphyrin Polymers Bearing N,N′-Ethylene Crosslinkers as Photosensitizers against Bacteria	100
Influence of Centrifugation Cycles of Natural Rubber Latex on Final Properties of Uncrosslinked Deproteinized Natural Rubber	100
Lamellar Dilation in (AB)-g-A Copolymacromer Melts: A Dissipative Particle Dynamics Study	100
Controlled and Synchronised Vascular Regeneration upon the Implantation of Iloprost- and Cationic Amphiphilic Drugs-Conjugated Tissue-Engineered Vascular Grafts into the Ovine Carotid Artery: A Proteo	99
Electrochemical Performance of Guanidinium Salt-Added PVP/PEO Solid Polymer Electrolyte with Superior Power Density	99
A Straightforward Method to Produce Multi-Nanodrug Delivery Systems for Transdermal/Tympanic Patches Using Electrospinning and Electrospray	99
Cellulose Nanofibers/Pectin/Pomegranate Extract Nanocomposite as Antibacterial and Antioxidant Films and Coating for Paper	99
Effect of Hydrothermal Aging on Damping Properties in Sisal Mat-Reinforced Polyester Composites	99
Non-Covalent Functionalization of Graphene Oxide with POSS to Improve the Mechanical Properties of Epoxy Composites	98
Reinforcing a Thermoplastic Starch/Poly(butylene adipate-co-terephthalate) Composite Foam with Polyethylene Glycol under Supercritical Carbon Dioxide	98
Properties and Structure of Thermoplastic Polyvinyl Alcohol/Polyamide Sea-Island Fibers	98
Dual-Template Molecularly Imprinted Polymers for Dispersive Solid-Phase Extraction Combined with High Performance Liquid Chromatography for the Determination of Sulfonamide Antibiotics in Environmenta	97
Split-Hopkinson Pressure Bar Test of Silicone Rubber: Considering Effects of Strain Rate and Temperature	97
Review of Synthesis and Separation Application of Metal-Organic Framework-Based Mixed-Matrix Membranes	97
Shedding Light on Degradation Gradients in Celluloid: An ATR-FTIR Study of Artificially and Naturally Aged Specimens	96
Adsorption and Recognition Property of Tyrosine Molecularly Imprinted Polymer Prepared via Electron Beam Irradiation	96
Vitrimer Nanocomposites for Highly Thermal Conducting Materials with Sustainability	95
Study of the Degradation of a TPS/PCL/Fique Biocomposite Material in Soil, Compost, and Water	95
Physicochemical and Sensory Stability Evaluation of Gummy Candies Fortified with Mountain Germander Extract and Prebiotics	94
Transient Response of Macroscopic Deformation of Magnetoactive Elastomeric Cylinders in Uniform Magnetic Fields	94
Charge Regulation of Poly(acrylic acid) in Solutions of Non-Charged Polymer and Colloids	94
Rational Designing of NiO Nanoparticles Anchored with PEG-WO3 for Enhanced Water Oxidation Performance	92
Advances in Sorptive Removal of Hexavalent Chromium (Cr(VI)) in Aqueous Solutions Using Polymeric Materials	92
Preparation of Flame-Retardant Glass Fiber-Reinforced Epoxy by Vacuum-Assisted Resin Infusion Process with Deep Eutectic Point Curing Agent	92
Mechanochemical Synthesis of Polyanilines and Their Nanocomposites: A Critical Review	92
Effect of Acrylate Emulsion on the Mechanical and Microscopic Properties of Straw Fiber-Reinforced Cement-Magnesium Slag Stabilized Soil	92

Volatile Organic Compounds Arising from Wood Polymers on Thermal Loading of Spruce Wood	91
Optimizing Tannin-NaCMC Compositions via DOE for Enhanced Carbon Yield and Strength in 3D-Printed Porous Carbon	91
Macro-Microscopic Characterization and Long-Term Performance Prediction of Polyvinyl Chloride Under Hydrothermal Aging Based on Creep Behavior Analysis	91
Compressive Mechanical Behavior and Corresponding Failure Mechanism of Polymethacrylimide Foam Induced by Thermo-Mechanical Coupling	91
Development of Poly(lactic acid)-Based Biocomposites with Silver Nanoparticles and Investigation of Their Characteristics	91
Compound Microalgae-Type Biofunctional Hydrogel for Wound Repair during Full-Thickness Skin Injuries	89
Finite Element Analysis of Patient-Specific 3D-Printed Cranial Implant Manufactured with PMMA and PEEK: A Mechanical Comparative Study	89
Development and Evaluation of a Novel Antibacterial Wound Dressing: A Powder Preparation Based on Cross-Linked Pullulan with Polyhexamethylene Biguanide for Hydrogel-Transition in Advanced Wound Manag	88
Bio-Based Polybenzoxazine–Cellulose Grafted Films: Material Fabrication and Properties	88
Effect of Sizing Agent on the Mechanical, Thermal, and Electrical Performance of Basalt Fiber/Epoxy Composites	88
Investigation of Structural Energy Absorption Performance in 3D-Printed Polymer (Tough 1500 Resin) Materials with Novel Multilayer Thin-Walled Sandwich Structures Inspired by Peano Space-Filling Curve	87
Post-Treatment of Tannic Acid for Thermally Stable PEDOT:PSS Film	87
Electrospinning-Generated Nanofiber Scaffolds Suitable for Integration of Primary Human Circulating Endothelial Progenitor Cells	87
Analysis of the Adsorption-Release Isotherms of Pentaethylenehexamine-Modified Sorbents for Rare Earth Elements (Y, Nd, La)	87
Photopolymerization of Limonene Dioxide and Vegetable Oils as Biobased 3D-Printing Stereolithographic Formulation	87
Mechanical Characteristics Evaluation of a Single Ply and Multi-Ply Carbon Fiber-Reinforced Plastic Subjected to Tensile and Bending Loads	87
Toward the Optimization of the Optical Behavior of Transparent Wood: Current State of the Art and Perspectives	87
Polymer-Derived Carbon Nanofiber and Its Photocurrent-Switching Responses of Carbon Nanofiber/Cu Nanocomposite in Wide Ranges of Excited Light Wavelength	86
The Impact of Chlorinated Water and Sun Exposure on the Durability and Performance of Swimwear Materials	86
Facile Fabrication of Attapulgite-Modified Chitosan Composite Aerogels with Enhanced Mechanical Strength and Flame Retardancy for Thermal Insulation	86
High-Temperature Compressive Properties of 3D Printed Polymeric Lattice-Reinforced Cement-Based Materials	86
Improvements in Injection Moulds Cooling and Manufacturing Efficiency Achieved by Wire Arc Additive Manufacturing Using Conformal Cooling Concept	85
Active Loading of Pectin Hydrogels for Targeted Drug Delivery	85
Mechanical Properties of Bambusa Oldhamii and Yushania-Alpina Bamboo Fibres Reinforced Polypropylene Composites	85
A QbD-Navigated Approach to the Development and Evaluation of Etodolac–Phospholipid Complex Containing Polymeric Films for Improved Anti-Inflammatory Effect	85
Terahertz Humidity Sensing Based on Surface-Modified Polymer Mesh Membranes with Photografting PEGMA Brush	84
A Technical–Economic Study on Optimizing FDM Parameters to Manufacture Pieces Using Recycled PETG and ASA Materials in the Context of the Circular Economy Transition	84
Assessment of Molecularly Imprinted Polymers as Selective Solid-Phase Extraction Sorbents for the Detection of Cloxacillin in Drinking and River Water	84
Strategy Based on Michael Addition Reaction for the Development of Bioinspired Multilayered and Multiphasic 3D Constructs	83
Leveraging Spruce Bark Particle Morphology for Enhanced Internal Bonding in Particleboard Production	83
Preparation of Thermosensitive Fluorescent Polyacrylamide Nanofiber Membrane and Visual Temperature Sensing	83
Modeling and Evaluation of Customizable Immobilization Masks for Precision Radiotherapy	83
Ketorolac-Loaded PLGA-/PLA-Based Microparticles Stabilized by Hyaluronic Acid: Effects of Formulation Composition and Emulsification Technique on Particle Characteristics and Drug Release Behaviors	83
Chitosan-Based Films Blended with Tannic Acid and Moringa Oleifera for Application in Food Packaging: The Preservation of Strawberries (Fragaria ananassa)	82
Manuka Honey/2-Hydroxyethyl Methacrylate/Gelatin Hybrid Hydrogel Scaffolds for Potential Tissue Regeneration	82
Crosslinked Zwitterionic PVA-g-SBMA/PEDOT:PSS Networks for Mechanically Robust All-Solid-State Electrolytes	82
Hybrid Resorbable 3D-Printed Mesh/Electrospun Nanofibrous Drug/Biomolecule-Eluting Mats for Alveolar Ridge Preservation	82
Effect of Fiber Misalignment and Environmental Temperature on the Compressive Behavior of Fiber Composites	82
Properties of Hyper-Elastic-Graded Triply Periodic Minimal Surfaces	82
Grafting of Methyl Methacrylate onto Gelatin Initiated by Tri-Butylborane—2,5-Di-Tert-Butyl-p-Benzoquinone System	82
Applications of Hemp Polymers and Extracts in Food, Textile and Packaging: A Review	81
Effect of the Class C Fly Ash on Low-Reactive Gold Mine Tailing Geopolymers	81
Optimize PLA/EVA Polymers Blend Compositional Coating for Next Generation Biodegradable Drug-Eluting Stents	81
Deep Transfer Learning Approach for Localization of Damage Area in Composite Laminates Using Acoustic Emission Signal	81
Novel PVA–Hyaluronan–Siloxane Hybrid Nanofiber Mats for Bone Tissue Engineering	81
A Hybrid Ionic Liquid–HPAM Flooding for Enhanced Oil Recovery: An Integrated Experimental and Numerical Study	81
Poly(ε-caprolactone)-poly(ethylene glycol) Tri-Block Copolymer as Quercetin Delivery System for Human Colorectal Carcinoma Cells: Synthesis, Characterization and In Vitro Study	81
Urushiol-Based Benzoxazine Containing Sulfobetaine Groups for Sustainable Marine Antifouling Applications	80
Facile Preparation of Carbon Nanotubes/Cellulose Nanofibrils/Manganese Dioxide Nanowires Electrode for Improved Solid-Sate Supercapacitor Performances	80
Effect of Artificial Neural Network Design Parameters for Prediction of PS/TiO2 Nanofiber Diameter	80
Innovative Polymeric Coatings with Dual Antifouling and Light-Activated Bactericidal Functions for Urinary Catheter Applications	80
Synthesis and Degradation Behavior of Poly(glycerol sebacate)-Isophorone Diisocyanate Scaffolds Reinforced with Hydroxyapatite for Biomedical Applications	80
Design and Evaluation of Complex Polypeptide-Loaded Dissolving Microneedles for Improving Facial Wrinkles in Different Areas	80
Effect of Recycled Polyvinyl Butyral (rPVB) Addition on the Tribological Performance of Glass–Fiber Reinforced Polyamide (PAGF) during Reciprocating Sliding Wear Conditions	79
Extraction and Depolymerization of Lignin from Different Agricultural and Forestry Wastes to Obtain Building Blocks in a Circular Economy Framework	79
Sound Absorption of the Absorber Composed of a Shunt Loudspeaker and Porous Materials in Tandem	79
Tensile Strength of Poly(lactic acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber	79
Preparation and Properties of Electrospun PLLA/PTMC Scaffolds	79
A Conductive, Photothermal and Antioxidant ε-Poly-L-Lysine/Carbon Nanotube Hydrogel as a Candidate Dressing for Chronic Diabetic Wounds	79
Effects of Butadiene Sulfone as an Electrolyte Additive on the Formation of Solid Electrolyte Interphase in Lithium-Ion Batteries Based on Li4Ti5O12 Anode Materials	79
In Situ Monitoring of the Curing of Highly Filled Epoxy Molding Compounds: The Influence of Reaction Type and Silica Content on Cure Kinetic Models	79
Effect of the Interior Fill Percentage on the Deterioration of the Mechanical Properties of FFF-3D-Printed PLA Structures	79
Surface Development of Polyethylene Terephthalate Films Using Low-Pressure, High-Frequency Argon + Oxygen Plasma on Zinc Powder for Dye-Sensitized Solar Cells	78
Morphological Characterization of High Molecular Weight Poly(styrene-b-isoprene) or PS-b-PI and Its Hydrogenated, Sulfonated Derivatives: An AFM Study	78
Antidiabetic Wound Dressing Materials Based on Cellulosic Fabrics Loaded with Zinc Oxide Nanoparticles Synthesized by Solid-State Method	78
Mechanics of Surface Instabilities in Soft Dielectrics Subject to Electromechanical Loading	77
Effect of Interfacial Compatibility on Mechanical Property of Polyamide 6 Modified by Polyborosiloxane	77
Conformal Cooling Channel Design for Improving Temperature Distribution on the Cavity Surface in the Injection Molding Process	77
Preparation of Molecularly Imprinted Polymer Microspheres for Selective Solid-Phase Extraction of Capecitabine in Urine Samples	77
Polybutylene Succinate Processing and Evaluation as a Micro Fibrous Graft for Tissue Engineering Applications	77
Effect of Cerium (IV) Oxide Particle Size on Polydimethylsiloxane Polymer to Form Flexible Materials against Ionizing Radiation	77
Processing and Properties of Polyhydroxyalkanoate/ZnO Nanocomposites: A Review of Their Potential as Sustainable Packaging Materials	77
The Influence of Syringic Acid and Erucic Acid on the Antioxidant Properties of Natural Rubber: Experimental and Molecular Simulation Investigations	76
Regulation of Mesenchymal Stem Cell Morphology Using Hydrogel Substrates with Tunable Topography and Photoswitchable Stiffness	76
Critical Adsorption of Polyelectrolytes onto Patchy Particles with a Low-Dielectric Interior	76
Carboxymethyl-Cellulose-Containing Ag Nanoparticles as an Electrochemical Working Electrode for Fast Hydroxymethyl-Furfural Sensing in Date Molasses	76
The Effect of Feeding Sequence on the Structure and Properties of the Ethylene/1-Octene Copolymer in the Semi-Continuous Polymerization Reaction System	76
Electrospun Nanofibers for Biomedical, Sensing, and Energy Harvesting Functions	75
Applications of the Photocatalytic Degradation of TiO2 Nanoparticles Under UV Radiation in the Development of Innovative Self-Cleaning Geopolymer Construction Materials	75
Estimation of Density Distribution in a Rigid PU Foam Block Manufactured in a Sealed Mold	75
Behaviour of FITC-Labeled Polyallylamine in Polyelectrolyte Microcapsules	75
Advanced Electrospinning Technology Applied to Polymer-Based Sensors in Energy and Environmental Applications	75
Raman Study of Block Copolymers of Methyl Ethylene Phosphate with Caprolactone and L-lactide	74
Enhancement of the Mechanical Performance of Glass-Fibre-Reinforced Composites through the Infusion Process of a Thermoplastic Recyclable Resin	74
A Precise Prediction of the Chemical and Thermal Shrinkage during Curing of an Epoxy Resin	74
Computational Simulation Study-Based Formulation Development and Characterization of MethylprednisoloneLoaded Nanoparticles Containing Chitosan and Pectin to Treat Nocturnal Asthma	74
Preparation and Characterization of Antibacterial Polyvinyl Alcohol Films Containing Syzygium aromaticum Essential Oil	74
Moisture Content Prediction in Polymer Composites Using Machine Learning Techniques	74
Polyimine-Based Self-Healing Composites: A Review on Dynamic Covalent Thermosets for Sustainable and High-Performance Applications	74
Synthesis and Characterization of Porous Chitosan/Saccharomycetes Adsorption Microspheres	73
Nanostructured Polyacrylamide Hydrogels with Improved Mechanical Properties and Antimicrobial Behavior	73
Compression and Bending Properties of Short Carbon Fiber Reinforced Polymers Sandwich Structures Produced via Fused Filament Fabrication Process	73
Formation of PEG-PLGA Microspheres for Controlled Release of Simvastatin and Carvacrol: Enhanced Lipid-Lowering Efficacy and Improved Patient Compliance in Hyperlipidemia Therapy	73
Use of Recycled Additive Materials to Promote Efficient Use of Resources While Acting as an Effective Toughness Modifier of Wood–Polymer Composites	73
Eco-Friendly Polymer Nanocomposite Coatings for Next-Generation Fire Retardants for Building Materials	73