Micromachines

Article	Citations
An Optimal Shaped Sensor Array Derivation	214
Zirconia-Toughened Alumina (ZTA) Nanoceramics with a Gradient Microstructure: A Comparative Study of ZTA Ceramics with Fibrous and Granular Morphology	190
A Novel Algorithm for Scenario Recognition Based on MEMS Sensors of Smartphone	186
Investigating a Detection Method for Viruses and Pathogens Using a Dual-Microcantilever Sensor	174
An Overview of Substrate Copper Trace Crack Through Experiments, Characterization, and Numerical Simulations	166
Self-Assembly of DNA-Grafted Colloids: A Review of Challenges	158
Impedance Iterative Learning Backstepping Control for Output-Constrained Multisection Continuum Arms Based on PMA	146
Range Expansion Technology for Ring MEMS Gyroscopes Based on Drive Voltage Modulation	143
Editorial for the Special Issue on Lab-on-PCB Devices	138
Ultrafast Temporal-Spatial Dynamics of Phase Transition in N-Doped Ge2Sb2Te5 Film Induced by Femtosecond Laser Pulse Irradiation	138
Scalable Additive Construction of Arrayed Microstructures with Encoded Properties for Bioimaging	131
An Assessment of Local Geometric Uncertainties in Polysilicon MEMS: A Genetic Algorithm and POD-Kriging Surrogate Modeling Approach	128
Increasing Heat Transfer from Metal Surfaces through Laser-Interference-Induced Microscopic Heat Sinks	126
Simulation and Optimization of Hemispherical Resonator’s Equivalent Bottom Angle for Frequency-Splitting Suppression	122
Editorial for the Special Issue on Nanostructured Surfaces and Devices for Biomedical Applications	122
Wavefront Characteristics of a Digital Holographic Optical Element	118
Valveless On-Chip Aliquoting for Molecular Diagnosis	117
A False Trigger-Strengthened and Area-Saving Power-Rail Clamp Circuit with High ESD Performance	117
Simulation Studies on Single-Event Effects and the Mechanisms of SiC VDMOS from a Structural Perspective	110
Study on the Carrier Transport Process in Deep Ultraviolet Light-Emitting Diodes with Al-Content-Varied AlGaN Composite Last Quantum Barrier	108
Silicon-on-Insulator (SOI) Lateral Power-Reduced Surface Field FinFET with High-Power Figure of Merit of 239.3 MW/cm2	106
Numerical Simulation of Thermal Fields and Microstructure Evolution in SLM of Fe32Cr33Ni29Al3Ti3 Alloy	103
A X-Band Integrated Passive Device Structure Based on TMV-Embedded FOWLP	103
Novel Throat-Attached Piezoelectric Sensors Based on Adam-Optimized Deep Belief Networks	101
A Defect Detection Algorithm for Optoelectronic Detectors Utilizing GLV-YOLO	100

Glass Microbubble Encapsulation for Improving the Lifetime of a Ferrofluid-Based Magnetometer	99
Performing MHz-Level Repetition Rate Tuning for Coherent Dual-Microcomb Interferometry	98
A Review on Micro-Watts All-Digital Frequency Synthesizers	98
A Quad-Band Highly Selective Frequency Selective Surface with Ultra-Wideband Rejection	95
Backpropagation Neural Network-Based Prediction Model of Marble Surface Quality Cut by Diamond Wire Saw	95
Intelligent Genetic Decoding System Based on Nucleic Acid Isothermal Amplification for Non-Small Cell Lung Cancer Diagnosis	93
Importance of Spatial Arrangement of Cardiomyocyte Network for Precise and Stable On-Chip Predictive Cardiotoxicity Measurement	92
Preconcentration of Fluorescent Dyes in Electromembrane Systems via Electrophoretic Migration	91
Editorial for the Special Issue on the Latest Advancements in Semiconductor Materials, Devices and Systems	89
Ferroelectric Domain Modulation with Tip-Poling Engineering in BiFeO3 Films	87
Surface Modification of Heterojunction with Intrinsic Thin Layer Solar Cell Electrode with Organosilane	83
Editorial for the Special Issue on Nanomaterials for Micro/Nanodevices	81
Novel Weft-Knitted Strain Sensors for Motion Capture	80
ANN-Based LiDAR Positioning System for B5G	80
Nanostructured Scaffold, Combined with Human Dental Pulp Stem Cell Secretome, Induces Vascularization in Medicinal Leech Model	79
Novel Technique to Increase the Effective Workspace of a Soft Robot	79
WEDM-Generated Slot Width Variation Modeling	77
New Rotor Position Redundancy Decoding Method Based on Resolver Decoder	77
Analysis of Polarization Images in the Microphysical Blood Parameters Research for the Hematocrit Diagnostics	76
Developing a Real-Time Working Method That Improves Process Efficiency in High-Power Fiber Laser Systems	76
An Improved Cubature Kalman Filter for GNSS-Denied and System-Noise-Varying INS/GNSS Navigation	74
Modular Flow Synthesis of Citric Acid-Coated Superparamagnetic Iron Oxide Nanoparticles: Preliminary Results	74
Student’s t-Distributed Extended Kalman Filter with Switch Factor for UWB Localization Under Colored Measurement Noise	73
The ESD Robustness and Protection Technology of P-GaN HEMT	72
Acoustic Atomization-Induced Pumping Based on a Vibrating Sharp-Tip Capillary	71
The Influence and Compensation of Process on Measurement Accuracy in Digital Grating Focusing and Leveling Sensors	70
A 14-Bit, 12 V-to-100 V Voltage Compliance Electrical Stimulator with Redundant Digital Calibration	70
Simulation-Assisted Process Design and Experimental Verification of Laterally Confined Oxide Areas Generated with Continuous Electrolytic Free Jet on EN AW-7075 Aluminum Alloy	69
Numerical Investigation of Non-Newtonian Fluid Rheology in a T-Shaped Microfluidics Channel Integrated with Complex Micropillar Structures Under Acoustic, Electric, and Magnetic Fields	68
Metasurfaces Assisted Twisted α-MoO3 for Spinning Thermal Radiation	68
An Exploratory Study of Laser Scribing Quality through Cross-Section Scribing Profiles	67
Internal Temperature Measurement of Optically Levitated Particles in Vacuum by Raman Thermometry	66
Impact of Rapid Thermal Annealing and Oxygen Concentration on Symmetry Bipolar Switching Characteristics of Tin Oxide-Based Memory Devices	66
Mechanical Response of MEMS Suspended Inductors under Shock Using the Transfer Matrix Method	65
Peripheral-Free Calibration Method for Redundant IMUs Based on Array-Based Consumer-Grade MEMS Information Fusion	65
Hierarchical Micro/Nanostructures with Anti-Reflection and Superhydrophobicity on the Silicon Surface Fabricated by Femtosecond Laser	65
Fabrication of µFFE Devices in COC via Hot Embossing with a 3D-Printed Master Mold	65
Cu-Cu Thermocompression Bonding with a Self-Assembled Monolayer as Oxidation Protection for 3D/2.5D System Integration	64
A Novel Method to Detect Partial Shadow Effects in Perovskite-Based Simulated Solar Cell System Faults	63
Investigation on Aluminum Alloy Reflector Mirror Processing Technology Combining Ultrasonic Rolling and Single-Point Diamond Turning	63
A Wire Bow Model of Diamond Wire Sawing with Asymmetric Arc Hypothesis	63
Two-Dimensional Simulation on the Critical Diameter of Particles in Asymmetric I-Shaped DLD Arrays	62
A Substructure Condensed Approach for Kinetostatic Modeling of Compliant Mechanisms with Complex Topology	62
Checkerboard Helmholtz Resonator Metasurface for Dual-Mode Decoupled Dual-Band Coherent Perfect Absorption with Independently Tunable Frequencies	61
State of Charge Estimation of Lithium-Ion Batteries Using Stacked Encoder–Decoder Bi-Directional LSTM for EV and HEV Applications	61
Improvement of AlGaN/GaN HEMTs Linearity Using Etched-Fin Gate Structure for Ka Band Applications	60
Performance Analysis and Optimization of an InGaAs/GaAsSb Heterojunction Dopingless Tunnel FET with a Heterogate Dielectric	59
A Study on Regulating the Residual Stress of Electroplated Cu by Manipulating the Nanotwin Directions	59
Rao-Blackwellized Particle Filter Algorithm Integrated with Neural Network Sensor Model Using Laser Distance Sensor	58
The Development and Progress of the UWB Physical Layer	58

Study on Electrical Characteristics and ECG Signal Acquisition Performance of Fabric Electrodes Based on Organizational Structure and Wearing Pressure	58
Microgrooves with Small Taper Angle Processed by Nanosecond Laser in Closed Flowing Water	58
A Study on the Sub-5 nm Nano-Step Height Reference Materials Fabricated by Atomic Layer Deposition Combined with Wet Etching	57
Design of a Novel Compact Bandpass Filter Based on Low-Cost Through-Silicon-Via Technology	57
Design and Application of a Flexible Blood Oxygen Sensing Array for Wearable Devices	57
Strain and Electromyography Dual-Mode Stretchable Sensor for Real-Time Monitoring of Joint Movement	57
Investigation on Thermally Radiative Mixed Convective Flow of Carbon Nanotubes/Al2O3 Nanofluid in Water Past a Stretching Plate with Joule Heating and Viscous Dissipation	57
Effects of Laser Machining Aluminum Alloy in Different Media	56
RETRACTED: Barbillon, G. Plasmonic Nanostructures Prepared by Soft UV Nanoimprint Lithography and Their Application in Biological Sensing. Micromachines 2012, 3, 21–27	56
Modeling and Experimental Study of Vibration Energy Harvester with Triple-Frequency-Up Voltage Output by Vibration Mode Switching	56
Fabricating Air Pressure Sensors in Hollow-Core Fiber Using Femtosecond Laser Pulse	55
Configuration Synthesis and Performance Analysis of 1T2R Decoupled Wheel-Legged Reconfigurable Mechanism	55
High Spectrum Efficiency and High Security Radio-Over-Fiber Systems with Compressive-Sensing-Based Chaotic Encryption	55
Periodic Structural Defects in Graphene Sheets Engineered via Electron Irradiation	54
Surface Modification of 3D Printed Microfluidic Devices for Controlled Wetting in Two-Phase Flow	54
Electronic Structure and Transport Properties of Bi2Te3 and Bi2Se3 Single Crystals	53
Investigation of the Combined Effect of Total Ionizing Dose and Time-Dependent Dielectric Breakdown on PDSOI Devices	53
Unconventional Rashba Spin-Orbit Coupling on the Charge Conductance and Spin Polarization of a Ferromagnetic/Insulator/Ferromagnetic Rashba Metal Junction	53
Investigation on the Surface Integrity of 40Cr Steel Machined by Rotary Ultrasonic Flank Milling	52
Process Analysis and Topography Evaluation for Monocrystalline Silicon Laser Cutting-Off	52
Effect of Particle Migration on the Stress Field in Microfluidic Flows of Blood Analog Fluids at High Reynolds Numbers	52
Research on the Method of Reducing Dynamic Cutting Force in Aspheric Machining	51
Crack-Based Sensor by Using the UV Curable Polyurethane-Acrylate Coated Film with V-Groove Arrays	51
Research and Design of a Bidirectional Self-Propelled Traveling Wave Type Linear Ultrasonic Motor	51
Topic Editorial on Fiber-Optic Sensors	51
Electrochemical Micro-Immunosensor of Cubic AuPt Dendritic Nanocrystals/Ti3C2-MXenes for Exosomes Detection	51
Broadband and Efficient Metamaterial Absorber Design Based on Gold–MgF2–Tungsten Hybrid Structure for Solar Thermal Application	51
Detection of Counterfeit Perfumes by Using GC-MS Technique and Electronic Nose System Combined with Chemometric Tools	50
A Review of Microinjection Moulding of Polymeric Micro Devices	50
Molecularly Imprinted Polymeric Particles Created Using Droplet-Based Microfluidics: Preparation and Applications	50
On-Chip Temperature Compensation for Small-Signal Gain Variation Reduction	50
Investigation of Solvent-Assisted In-Mold Bonding of Cyclic Olefin Copolymer (COC) Microfluidic Chips	50
Towards High-Temperature MEMS: Two-Step Annealing Suppressed Recrystallization in Thin Multilayer Pt-Rh/Zr Films	50
Lignocellulosic Bionanomaterials for Biosensor Applications	49
Selective Properties of Mid-Infrared Tamm Phonon-Polaritons Emitter with Silicon Carbide-Based Structures	49
One-Pot Facile Synthesis of a Cluster of ZnS Low-Dimensional Nanoparticles for High-Performance Supercapacitor Electrodes	49
Fabrication of Paper Microfluidic Chips via Wax Soft Lithography	49
Editorial for the Special Issue on Recent Advances in Micro/Nano-Fabrication	49
Facile Preparation of Monodisperse Cu@Ag Core–Shell Nanoparticles for Conductive Ink in Printing Electronics	48
Development of Pressure Sensor Based Wearable Pulse Detection Device for Radial Pulse Monitoring	48
Gesture-Controlled Robotic Arm for Agricultural Harvesting Using a Data Glove with Bending Sensor and OptiTrack Systems	48
A Deployable and Cost-Effective Kirigami Antenna for Sub-6 GHz MIMO Applications	48
Separation and Washing of Candida Cells from White Blood Cells Using Viscoelastic Microfluidics	48
A Multimodal CMOS Readout IC for SWIR Image Sensors with Dual-Mode BDI/DI Pixels and Column-Parallel Two-Step Single-Slope ADC	47
A Compliant SMA-Actuated Capsule Robot with Integrated Locomotion and Steering for Wireless Capsule Endoscopy	47
Point-of-Care Devices for Viral Detection: COVID-19 Pandemic and Beyond	47
Optimizing Processing Parameters and Surface Quality of TC18 via Ultrasonic-Assisted Milling (UAM): An Experimental Study	47
Capillary Force-Driven Quantitative Plasma Separation Method for Application of Whole Blood Detection Microfluidic Chip	47
Overview of the MEMS Pirani Sensors	47
Ultrasonic Signal Processing Method for Dynamic Burning Rate Measurement Based on Improved Wavelet Thresholding and Extreme Value Feature Fitting	47
Development of a 3D-Printed Nanocarbon Electrode Modified with Bimetallic Nanoparticles for Enhanced Electrochemical Detection of Dopamine	46
Enhancement of Quality Factors in a 6.5 GHz Resonator Using Mo/SiC Composite Microstructures	46
A Conformal Tri-Band Antenna for Flexible Devices and Body-Centric Wireless Communications	46
A Cascaded Dual Spiral Microfluidic Chip for Continuous Separation of Multicomponent Microparticles	46
Micro Electrical Discharge Machining of Ultrafine Particle Type Tungsten Carbide Using Dielectrics Mixed with Various Powders	46
A Substrate Integrated Waveguide-Based W-Band Antenna for Microwave Power Transmission	46
Design of a High Coupling SAW Resonator Based on an Al/41° Y-X LiNbO3/SiO2/poly-Si/Si Structure for Wideband Filter	45
Design and Fabrication of a Dual-Axis MEMS Electrostatic Micromirror Based on a Planar Comb Drive	45
Machine Learning-Guided Cycle Life Prediction for Electrochromic Devices Based on Deuterium and Water Mixing Solvent	45
A Review of the Application of Seal Whiskers in Vortex-Induced Vibration Suppression and Bionic Sensor Research	45
Degradation Measurement and Modelling under Ageing in a 16 nm FinFET FPGA	45
A Four Element Stringray-Shaped MIMO Antenna System for UWB Applications	45
Te-rP-C Anodes Prepared Using a Scalable Milling Process for High-Performance Lithium-Ion Batteries	45
Roll-to-Roll (R2R) High-Throughput Manufacturing of Foil-Based Microfluidic Chips for Neurite Outgrowth Studies	44
Sapphire Selective Laser Etching Dependence on Radiation Wavelength and Etchant	43
PEDOT:PSS-MWCNT Nanocomposite Wire for Routing in Energy Harvesting Devices	43
ZnO Hollow Quasi-Spheres Modified Screen-Printed Graphite Electrode for Determination of Carmoisine	43
A Novel Variable Volume Capillary Microgripper for Micromanipulation in Aqueous Media	43
Efficient and Secure WiFi Signal Booster via Unmanned Aerial Vehicles WiFi Repeater Based on Intelligence Based Localization Swarm and Blockchain	43
Quantitative Investigation of the Link between Actin Cytoskeleton Dynamics and Cellular Behavior	43
Ultrathin Microlens Arrays for Dynamic Beam Shaping Based on 3D Lithography	43
High-Temperature Properties of LP-DED Additive Manufactured Ferritic STS 430 Deposits on Martensitic STS 410 Base Metal	43
Direct-Write Printing for Flexible and 3D Electronics: Aerosol Jet vs. Micro Dispensing	42
A Novel Nondestructive Testing Probe Using AlN-Based Piezoelectric Micromachined Ultrasonic Transducers (PMUTs)	42
A Review on the Coalescence of Confined Drops with a Focus on Scaling Laws for the Growth of the Liquid Bridge	42
Applying Acoustic Signals to Monitor Hybrid Electrical Discharge-Turning with Artificial Neural Networks	42
Study of the Effect of Cell Prestress on the Cell Membrane Penetration Behavior by Atomic Force Microscopy	42
Application of Piezoelectric PLLA Braided Cord as Wearable Sensor to Realize Monitoring System for Indoor Dogs with Less Physical or Mental Stress	42
Fragmentation Characteristics of Bubbles in a Throttling Hole Pipe	42
A Multi-Part Orientation Planning Schema for Fabrication of Non-Related Components Using Additive Manufacturing	41

A Low Mismatch Current Charge Pump Applied to Phase-Locked Loops	41
Gravity-Driven Microfluidic Viscosity Measurement with a Small Capillary Radius and Strong Pinning Effect	41
Toward Suppressing Oil Backflow Based on a Combined Driving Waveform for Electrowetting Displays	41
Electrothermally Driven Reconfiguration of Microrobotic Beam Structures for the ChipSail System	41
Design and Investigation of a High-Performance Quartz-Based SAW Temperature Sensor	41
An End-to-End Design and Simulation Methodology for Evaluating Package-Induced Signal Integrity Degradation in PCIe Channels	41
Design, Modeling, and Testing—A Compact Variable-Stiffness Actuator for Knee Joint Dimensions	41
Process Study on 3D Printing of Polymethyl Methacrylate Microfluidic Chips for Chemical Engineering	41
A Review of Circularly Polarized Dielectric Resonator Antennas: Recent Developments and Applications	41
Fabrication of a Microfluidic Test Device with a 3D Printer and Its Combination with the Loop Mediated Isothermal Amplification Method to Detect Streptococcus pyogenes	40
Analysis of Acoustic Surface Wave Focused Unidirectional Interdigital Transducers Using Coupling-of-Mode Theory	40
Current–Pressure Dynamics Modeling on an Annular Magnetorheological Valve for an Adaptive Rehabilitation Device for Disabled Individuals	40
Microstructure and Corrosion Resistance of LaNi5-xMgx Alloys	40
A Review on the Research Progress of Imprint Film Materials for Nanoimprint Lithography	40
A Highly Sensitive Dual-Drive Microfluidic Device for Multiplexed Detection of Respiratory Virus Antigens	40
Kinetic Energy Harvesting with a Piezoelectric Patch Using a Bistable Laminate	40
Organ-on-a-Chip Applications in Microfluidic Platforms	40
Design of a Portable Low-Cost I-V Curve Tracer for On-Line and In Situ Inspection of PV Modules	39
Application of Microfluidic Chips in the Detection of Airborne Microorganisms	39
A Laminar Microfluidic Platform for Probing the Effects of Spatially Heterogeneous Drug Distributions	39
Explainable Ensemble Machine Learning for Predicting Deposition Characteristics in Advanced Additive Manufacturing	39
From Micro to Marvel: Unleashing the Full Potential of Click Chemistry with Micromachine Integration	39
Challenges and Opportunities for High-Power and High-Frequency AlGaN/GaN High-Electron-Mobility Transistor (HEMT) Applications: A Review	39
Unlocking the Potential of Ti3C2Tx MXene: Present Trends and Future Developments of Gas Sensing	39
Thermal Error Prediction in High-Power Grinding Motorized Spindles for Computer Numerical Control Machining Based on Data-Driven Methods	39
Study on Anisotropic Mechanical Properties of Single-Crystal Silicon at Different Strain Rates	39
Progress in Polycrystalline SiC Growth by Low Pressure Chemical Vapor Deposition and Material Characterization	39
A Low-Power Optoelectronic Receiver IC for Short-Range LiDAR Sensors in 180 nm CMOS	39
Research Progress of AlGaN-Based Deep Ultraviolet Light-Emitting Diodes	39
In Situ Measurement and Reconstruction Technology of Cylindrical Shape of High-Precision Mandrel	39
Heteroepitaxial 3C-SiC for MEMS Applications	39
Switchable Vanadium Dioxide Metasurface for Terahertz Ultra-Broadband Absorption and Reflective Polarization Conversion	39
A Pressure and Temperature Dual-Parameter Sensor Based on a Composite Material for Electronic Wearable Devices	38
A High-Sensitivity Bowel Sound Electronic Monitor Based on Piezoelectric Micromachined Ultrasonic Transducers	38
Design of a Portable Nondestructive Instrument for Apple Watercore Grade Classification Based on 1DQCNN and Vis/NIR Spectroscopy	38
Loop-Mediated Isothermal Amplification as Point-of-Care Testing for EGFR-Mutated Lung Adenocarcinoma	38
A Monocular-Visual SLAM System with Semantic and Optical-Flow Fusion for Indoor Dynamic Environments	38
Nano Groove and Prism-Structured Triboelectric Nanogenerators	38
Application of Polymethylpentene, an Oxygen Permeable Thermoplastic, for Long-Term on-a-Chip Cell Culture and Organ-on-a-Chip Devices	38
Glass-Based Half-Mode SIW Bandpass Filter with Negative Coupling Structure	38
Screen-Printed PVDF Piezoelectric Pressure Transducer for Unsteadiness Study of Oblique Shock Wave Boundary Layer Interaction	38
Approximate Priority Hybrid 3DNoC Buffered-Bufferless Router	38
Parameter Estimation and Quantification of Magnetic Nanoparticles Based on Improved Particle Swarm Optimization	37
Bending and Vibration Analysis of Flexoelectric Beam Structure on Linear Elastic Substrates	37
Positive and Negative Photoconductivity in Ir Nanofilm-Coated MoO3 Bias-Switching Photodetector	37
VSG-FC: A Combined Virtual Sample Generation and Feature Construction Model for Effective Prediction of Surface Roughness in Polishing Processes	37
A Frequency- and Power-Dependent Semi-Analytical Model for Wideband RF Energy Harvesting Rectifiers	37
Multivariable Decoupling and Nonlinear Correction Method for Image-Based Closed-Loop Tracking of the Risley Prisms System	37
Machine Learning Algorithm for Efficient Design of Separated Buffer Super-Junction IGBT	37
Comprehensive Investigation of Electrical and Optical Characteristics of InGaN-Based Flip-Chip Micro-Light-Emitting Diodes	37
Fixed-Diamond Abrasive Wire-Saw Cutting Force Modeling Based on Changes in Contact Arc Lengths	37
Magnetically Driven Biopsy Capsule Robot with Spring Mechanism	37
A Study of Reverse Characteristics of GaN-on-Si Quasi-Vertical PiN Diode with Beveled Sidewall and Fluorine Plasma Treatment	37
Low-Profile and Wider-Angle Beam Tilting Parasitic Array Resonator Antenna with Optimized Deflected Ground Plane on FR-4 Substrate	36
Vision Feedback Control for the Automation of the Pick-and-Place of a Capillary Force Gripper	36
Passively Q-Switched Er-Doped Fiber Laser Based on Bentonite Clay (Al2H2O6Si) Saturable Absorber	36
Research on the Trajectory and Relative Speed of a Single-Sided Chemical Mechanical Polishing Machine	36
Wearable Medical Devices: Application Status and Prospects	36
Closed-Loop Microreactor on PCB for Ultra-Fast DNA Amplification: Design and Thermal Validation	36
A Dual-Band Eight-Element MIMO Antenna Array for Future Ultrathin Mobile Terminals	36
A 3.7-kW Oscillating-Amplifying Integrated Fiber Laser Featuring a Compact Oval-Shaped Cylinder Package	36
An Improved 3D OPC Method for the Fabrication of High-Fidelity Micro Fresnel Lenses	36
Effect of AlN Cap Layer on Polarization Coulomb Field Scattering in AlGaN/GaN Heterostructure Field Effect Transistor	36
Automatic Piecewise Extreme Learning Machine-Based Model for S-Parameters of RF Power Amplifier	36
Sensor-Fusion-Based Simultaneous Positioning and Vibration Suppression Method for a Three-Degrees-of-Freedom Isolator	36
Composition Engineering of Indium Zinc Oxide Semiconductors for Damage-Free Back-Channel Wet Etching Metallization of Oxide Thin-Film Transistors	35
Fabrication and Characterization of In0.53Ga0.47As/InAs/In0.53Ga0.47As Composite Channel Metamorphic HEMTs (mHEMTs) on a GaAs Substrate	35
Editorial for the Special Issue on Recent Advances in Reactive Ion Etching and Applications of High-Aspect-Ratio Microfabrication	35
Hollow Fiber Microreactor Combined with Digital Twin to Optimize the Antimicrobial Evaluation Process	35
Characteristic Study of a Typical Satellite Solar Panel under Mechanical Vibrations	35
Design, Fabrication and Characterization of Multi-Frequency MEMS Transducer for Photoacoustic Imaging	34
Role of Drone Technology Helping in Alleviating the COVID-19 Pandemic	34
Influencing Effects of Fabrication Errors on Performances of the Dielectric Metalens	34
Effect of Multiple Structural Parameters on the Performance of a Micromixer with Baffles, Obstacles, and Gaps	34
Design and Development of a Traveling Wave Ferro-Microfluidic Device and System Rig for Potential Magnetophoretic Cell Separation and Sorting in a Water-Based Ferrofluid	34
Understanding the Mechanisms of SiC–Water Reaction during Nanoscale Scratching without Chemical Reagents	34
An Ultra-Low-Voltage Transconductance Stable and Enhanced OTA for ECG Signal Processing	34
A Programmable Hybrid Energy Harvester: Leveraging Buckling and Magnetic Multistability	34
A Spaceborne Integrated S/Ka Dual-Band Dual-Reflector Antenna	34
Dual-Passband SAW Filter Based on a 32°YX-LN/SiO2/SiC Multilayered Substrate	34
An Effective Hybrid Rescheduling Method for Wafer Chip Precision Packaging Workshops in Complex Manufacturing Environments	34
ZnO QDs/GO/g-C3N4 Preparation and Photocatalytic Properties of Composites	34
Investigation of Machining Characteristics and Parameter Optimization for Laser-Assisted Milling of CF/PEEK Composites	34
Adaptive Fuzzy Fixed-Time Trajectory Tracking Control for a Piezoelectric-Driven Microinjector	33
Multi-Band Power Amplifier Module with Back-Off Efficiency Improvement using Ultra-Compact 3D Vertical Stack Multi-Chip Package for Cellular Handsets	33
A 2-GS/s 35.9-fJ/conv.-step Voltage–Time Hybrid Pipelined ADC with Digital Background Calibration in 28-nm CMOS	33
An Introduction to Nonlinear Integrated Photonics Devices: Nonlinear Effects and Materials	33
Effect of Local Annealing on Magnetic Flux Distribution and Noise in a Micro-Generator with Amorphous Shell	33
Enhanced Photoelectrochemical Performance of BiVO4 Photoanodes Co-Modified with Borate and NiFeOx	33
Learning-Based Repetitive Control of a Bowden-Cable-Actuated Exoskeleton with Frictional Hysteresis	33
A Review of the Vaporization Behavior of Some Metal Elements in the LPBF Process	33
A Load-Adaptive Driving Method for a Quasi-Continuous-Wave Laser Diode	33
Applying ZCT to Two-Phase Boost Converter with IGBT Switches Used	33
Triboelectric Nanogenerators Based on 2D Materials: From Materials and Devices to Applications	33
Natural Solid-State Hydrogel Electrolytes Based on 3D Pure Cotton/Graphene for Supercapacitor Application	33