Reaction Chemistry & Engineering

Papers
(The median citation count of Reaction Chemistry & Engineering is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)
ArticleCitations
Performance of post phthalate Ziegler Natta catalysts with activity limiting agents for propylene gas phase polymerization118
A generalized strategy for the ultrafast encapsulation of metal oxide nanoclusters into zeolites98
Correction: Parameter investigation of an organic–inorganic hybrid resin for a 3D-printed microchannel heat exchanger80
Semi-supervised machine learning approach for reaction stoichiometry and kinetic model identification using spectral data from flow reactors66
Catalytic degradation of pine sawdust over heterotopic Ca–Fe and HZSM-5 to produce aromatic hydrocarbons55
Demonstration and experimental model validation of the DME synthesis by reactive distillation in a pilot-scale pressure column52
Back cover47
Integrating continuous flow reaction and work-up: chiral amine resolution, separation and purification using a novel coalescing filter system45
Machine learning for revealing the relationship between the process–structure–properties of polypropylene in-reactor alloys44
Sustainable and green synthesis of C- and N-doped nanoporous g-C3N4: powerful sunlight-responsive photocatalysts for aerobic oxidation of toluene44
High flow rate microreactors integratingin situgrown ZnO nanowires for photocatalytic degradation43
Intelligent chemometric modelling of Al2O3 supported mixed metal oxide catalysts for oxidative dehydrogenation of n-butane using simple features41
A modular low-cost automated synthesis machine demonstrated by ring-opening metathesis polymerization40
One-pot enzymatic synthesis of l-5-methyltetrahydrofolate from folic acid using enzyme cascades40
Correction: Facile synthesis of novel NH2-MIL-53(Fe)/AgSCN heterojunction composites as a highly efficient photocatalyst for ciprofloxacin degradation and H2 production under vis39
Web-based graphical user interface for visualizing and analyzing chemical reaction networks37
Synthesis of an ethylene diamine modified tannin polymer and recovery of gold(iii) ions from electronic wastes36
Highly efficient Ni–NiO/carbon nanotubes catalysts for the selective transfer hydrogenation of 5-hydroxymethylfurfural to 2,5-bis(hydroxymethyl)furan34
On a seamlessly replicable circular photoreactor for lab-scale continuous flow applications31
Kinetic Monte Carlo residence time distributions and kinetics in view of extrusion-based polymer modification and recycling31
A universal solvent effect on the formation of soluble humins in glucose dehydration to 5-hydroxymethylfurfural30
Highly conductive CNT aerogel synthesizedviaan inert FC-CVD technique: a step towards a greener approach29
Relationship between feeding strategies and nitrogen sources in platform chemical bio-based 2,3-butanediol production in fed-batch fermentation28
Asymmetric aldol reaction catalyzed by amino acid tetrapeptides (l-Pro-l-Pro-l-Phe-l-Phe-OMe)27
Facile mussel-inspired polydopamine-coated 3D-printed bioreactors for continuous flow biocatalysis27
Lead titanate-modified perovskite with silver and cobalt as a superior photocatalyst toward the conversion of methylene blue26
Synthesis of acrylonitrile–butadiene–styrene copolymers through interface-initiated room-temperature polymerization25
Multi-objective Bayesian optimisation using q-noisy expected hypervolume improvement (qNEHVI) for the Schotten–Baumann reaction24
Playing with process conditions to increase the industrial sustainability of poly(lactic acid)-based materials24
Continuous flow synthesis and crystallization of modafinil: a novel approach for integrated manufacturing23
Contents list23
Front cover23
Correction: Rare-earth doped hexagonal NaYbF4 nanoprobes with size-controlled and NIR-II emission for multifunctional applications23
Glycerol selective oxidation to lactic acid over platinum–vanadium bimetallic catalysts supported on activated carbon23
Contents list23
Uncertainty quantification analysis of electrochemical reduction of CO222
An integrated reaction model of guaiacol hydrodeoxygenation using activated carbon supports: effects of support properties, metals, and solvents22
Gas–solid two-phase flow low-temperature solid-phase method: a novel approach to mechanically synthesize heterometallic–organic frameworks22
Opportunities for automation in continuous dynamic flow separation22
Synthesis of boron-doped carbon nanotubes by thermocatalytic decomposition of ethanol using a floating catalyst chemical vapor deposition method: kinetic study21
Hydrogenation of CO2 to synthetic natural gas (SNG) with 100% selectivity over a Ni–ZnO–MgO catalyst21
Design and simulation of a uniform irradiance photochemical platform21
Turning CO/CO2-containing industrial process gas into valuable building blocks for the polyurethane industry21
Large-scale and clean preparation of low-defect few-layered graphene from commercial graphite via hydroxyl radical exfoliation in an acidic medium21
Enzyme immobilization on a 3D-printed reactor for aldehyde oxidation to carboxylic acid under mild conditions20
Phosphoryl- or phosphinoyl-functionalized benzo[de]isoquinolinones: synthesis, experimental design, mechanism and biological activity20
Effect of defects and framework Sn on the stability and activity of Pt clusters for ethane dehydrogenation in chabazite zeolite20
Making photochemistry scalable – an operationally simple falling film looping photoreactor19
High-Efficiency Functional Materials: Challenges and Developments in Solution and Dry Processed Green OLEDs19
Back cover19
Correction: Applying quantum mechanics to deconvolute benchtop 1H NMR reaction data19
Enhanced H2 recovery by coupling the water–gas shift reaction with in situ CO2 capture and mineralization using earth abundant Ca- and Mg-silicates and hydroxides19
Influence of pH on the kinetics of hydrolysis reactions: the case of epichlorohydrin and glycidol19
Sequential hydrothiolation–hydrosilylation: a route to the creation of new organosilicon compounds with preset structures19
Suitable commercial catalysts for the synthesis of oxymethylene dimethyl ethers18
Ultra-fast and sustainable formal [3 + 3] cycloadditions enabled by mixed variable optimization on an automated micromole scale flow platform18
Selective catalytic reduction of NO over hierarchical Cu ZSM-5 coated on an alumina foam support18
A stepwise kinetic approach to quantify rate coefficients for reactant-, auto- and non-catalyzed urethanization of phenyl isocyanate and 1-butanol18
A novel numerical method coupling CFD with PSO vs. a mathematical approach in the modeling of photocatalytic degradation of NO18
Experimental insights into catalytic oxidation of 1,6-hexanediol to ε-caprolactone over (p-cymene)RuCl2(L) complexes in non-polar media18
Generating molecules with optimized aqueous solubility using iterative graph translation18
Anionic synthesis and end-functionalization of polymyrcene in a flow microreactor system17
Contents list17
Evaluating metal-free quaternized boronate esters as efficient catalysts for the fixation of CO2 with epoxides to form cyclic carbonates under suitable conditions17
A review of lipase immobilization on hydrophobic supports incorporating systematic mapping principles17
Enhanced activation of persulfate improves the selective oxidation of alcohols catalyzed by earth-abundant metal oxides embedded on porous N-doped carbon derived from chitosan17
Contents list17
Crystallization-based downstream processing of ω-transaminase- and amine dehydrogenase-catalyzed reactions17
Morphology modulation and electrochemical performance properties of Mn-decorated (NH4)2V10O25·8H2O as a cathode material for aqueous zinc-ion bat17
Copper-based metal–organic frameworks as highly efficient catalysts for the biomimetic catalytic synthesis of theaflavins17
Binary mixture of subcritical water and acetone: a hybrid solvent system towards the production of lignin nanoparticles16
Comprehensive study of lumped kinetic models and bio-oil characterization in microwave-assisted pyrolysis of Sargassum sp.16
Proton exchange membrane flow reactor with ozone-treated gas diffusion layers for production of pure H2O2 in aqueous and methanol solutions16
Steps, hops and turns: examining the effects of channel shapes on mass transfer in continuous electrochemical reactors16
Highly efficient Fe3O4@Pd@C3TES catalysts for azide/nitroaromatic hydrogenation and Suzuki–Miyaura cross-coupling: the promotion of nano-porous triethoxypropylsilane a16
Electrochemical hydrocarboxylation of styrene with CO2 in continuous flow16
One-pot cascade reactions for the synthesis of dinitroalkanes in aqueous buffer16
Back cover16
Front cover16
Pyrolysis and gasification of 5–20 mm tyre rubber cubes under carbon dioxide flow15
Thermokinetic analyses of metal-sensitive reactions in a ceramic flow calorimeter15
High-throughput reaction discovery for Cs–Pb–Br nanocrystal synthesis15
Contents list15
A novel magnetic nanoparticle as an efficient and recyclable heterogeneous catalyst for the Suzuki cross-coupling reaction15
Scaling-up continuous production of mesoporous silica particles at kg scale: design & operational strategies15
Dehydrogenation of the liquid organic hydrogen carrier perhydrodibenzyltoluene – reaction pathway over Pt/Al2O315
General synthesis of secondary imines via reductive coupling of carbonyl and nitro compounds employing a reusable cobalt catalyst15
The synergetic effect of Pd, In and Zr on the mechanism of Pd/In2O3–ZrO2for CO2hydrogenation to methanol15
Continuous flow oxidation of alkynes with KMnO4 for the synthesis of 1,2-diketone derivatives15
Systematic study of FFF materials for digitalizing chemical reactors with 3D printing: superior performance of carbon-filled polyamide15
Spatially resolved investigation into the coke formation and chemical states of nickel during autothermal reforming of acetic acid over Ni/CeO2–ZrO2 catalysts14
Contents list14
Back cover14
Stepwise pretreatment involving dilute acid and amine for corn stover fractionation toward full lignocellulose-oriented valorization14
Contents list14
Ru/La2S3 nanorods as an electrocatalyst for efficient N2 fixation under ambient conditions14
Lipase-catalysed esterification in a reactive natural deep eutectic solvent leads to lauroylcholine chloride rather than glucose ester14
Rational design of a graphitic carbon nitride catalytic–biocatalytic system as a photocatalytic platform for solar fine chemical production from CO214
Contents list14
Contents list14
Front cover13
Back cover13
Front cover13
Liquid marble – a high-yield micro-photobioreactor platform13
Back cover13
Crystal facet engineering of metal oxides for upgrading biomass-derived oxygenates: a perspective13
Synergistic catalysis over Ni/ZrOx for hydrogen production from hydrolysis of ammonia borane13
Designing of a novel heterogeneous nanocatalyst ZIF-4@HAp for solvent free base catalyzed esterification reaction13
Contents list13
Determination of intermediates and products of the uranyl aerosol formation in UF6 hydrolysis in the gas phase13
An efficient multiparameter method for the collection of chemical reaction data via ‘one-pot’ transient flow13
Front cover13
Making photocatalysts screenable – a milliscale multi-batch screening photoreactor as extension for the modular photoreactor13
Boosting the mechanocatalytic hydrolysis of cellulose by using a vibratory disc mill and clay minerals12
Transport phenomena in solid phase synthesis supported by cross-linked polymer beads12
The electrochemical oxidation of a thioether to form an API intermediate and the effects of substrate electronics on impurity formation12
Hydrogenation of phenol to cyclohexanol using carbon encapsulated Ni–Co alloy nanoparticles12
Reconfigurable photoflow reactor for enhanced optimization of the aerobic oxidative coupling of 2-phenylbenzoic acid12
Design and testing of an ozonolysis reactor module with on-the-fly ozone degassing under flow conditions12
Development of rare-earth modified PVC tubes with improved fluorescence and stability12
Dynamic experiments in flow accelerate reaction network definition in a complex hydrogenation using catalytic static mixers12
Accelerating cross-modality reaction optimization via robotically automated vacuum enabled direct-inject mass spectrometry (RAVE MS)12
Effects of the mixer shape in a flow-type supercritical hydrothermal reactor as evaluated by neutron radiography and CeO2 nanoparticle synthesis12
Cellulose hydrogenolysis to alcohol and ketone products using Co@C catalysts in the phosphoric acid aqueous solution12
Room-temperature conversion of CO2 into quinazoline-2,4(1H,3H)-dione using deep eutectic solvents at atmospheric pressure with high efficiency12
Recent progress in the development of catalysts for propane dehydrogenation in the presence of CO212
Efficient and convenient synthesis of methyl (S)-5-chloro-2-hydroxy-1-oxo-2,3-dihydro-1H-indene-2-carboxylate: a key intermediate for (S)-indoxacarb using aqueous TBHP as oxidant11
Modular 3D printed flow system for efficient one-step synthesis of phenyl-functionalised silica-coated superparamagnetic iron oxide nanoparticles11
High CO conversion in syngas to aromatics by addition of ZnMnZr oxides as methanol synthesis components11
Probing the active sites of a Prussian blue analogue-derived Mn–Co catalyst in the CO hydrogenation to higher alcohols by high-pressure pulse experiments and co-feeding of ethylene11
Monomeric immobilization of methylene blue on pure silica particles derived from industrial waste11
The switch-off method: rapid investigation of flow photochemical reactions11
Liquid-phase catalytic hydrodechlorination of chlorinated organic compounds in a continuous flow micro-packed bed reactor over a Pd/AC catalyst11
Dioxygen-triggered oxidation of benzylic C–H bonds: insight on the synergistic effect of Cu–Fe bimetallic oxide11
Contents list11
Photocatalytic degradation of ciprofloxacin and metformin in a continuous-flow tubular reactor11
Contents list11
Synthesis of Ga-modified ZSM-48 with improved hydroisomerization performance of n-dodecane11
Investigation of the effect of microflow reactor diameter on condensation reactions in l-proline-immobilized polymer monoliths11
A novel core–shell bimetallic ZrAl-MOF simultaneously boosting electrostatic attraction and ion exchange to eliminate excessive fluoride11
A modular, reusable biocatalytic flow system for UDP-GlcNAc production11
Pore flow-through catalytic membrane reactor for steam methane reforming: characterization and performance11
The effect of hydrophilic properties of carbon-supported catalysts for the water–gas shift reaction: a kinetic study11
Optimization of parameters during phosphoric acid production using response surface methodology: toward a biomimetic process11
Contents list11
Catalytic transformation of epoxy resin into dicyclohexane11
Selective aerobic oxidative C–C bond cleavage using a high-entropy oxide-derived multimetallic catalyst11
Microwave-assisted impregnation of highly dispersed Mo over HZSM-5 using various Mo precursors for methane dehydroaromatization11
Oxidative desulfurization of fuel oil catalyzed by a carbon nitride supported phosphotungstic acid based dicationic ionic liquid10
3D printed filtration and separation devices with integrated membranes and no post-printing assembly10
Front cover10
Front cover10
An integrated five-step continuous flow synthesis of 2-(1-cyclohexenyl)ethylamine: a key intermediate for morphinans10
Contents list10
CO2 adsorption on PEHA-functionalized geothermal silica waste: a kinetic study and quantum chemistry approach10
Understanding the effects of forced and bubble-induced convection in transport-limited organic electrosynthesis10
Automated instant labeling chemistry workflow for real-time monitoring of monoclonal antibody N-glycosylation10
The effect of chemical representation on active machine learning towards closed-loop optimization10
Contents list10
Contents list10
Anionic polymerizations in a microreactor10
Back cover10
Efficient and continuous furfural hydrogenation to furfuryl alcohol in a micropacked bed reactor10
Effect of DMSO on the catalytical production of 2,5-bis(hydoxymethyl)furan from 5-hydroxymethylfurfural over Ni/SiO2catalysts10
Back cover10
Efficient photocatalytic degradation of ultra-high concentration printing and dyeing wastewater using a SiO2/GCN nanocomposite10
Tetracycline degradation in the Fe3O4@HKUST-1/persulfate system: properties, activation mechanism, and degradation pathways9
Reactors for flow biocatalysis: classification, performance, and prospects9
Front cover9
Green and sustainable synthesis of poly(δ-valerolactone) with a TBD catalyzed ring-opening polymerization reaction9
Design and characterization of a flow reaction calorimeter based on FlowPlate® Lab and Peltier elements9
Is it reliable to determine the stoichiometry of extraction complexes using the classic slope analysis model in acidic extraction systems?9
Development of a two-phase flow reaction system for DNA-encoded amide coupling9
Front cover9
Defluoridation using hydroxyapatite implanted lanthanum organic framework-based bio-hybrid beads9
Designing neoteric acidic deep eutectic solvents: an innovative, low-cost and environment-friendly strategy in the fast and facile production of 5-hydroxymethylfurfural9
Process intensification of continuous-flow seATRP by a sonicated multi-reactor setup9
Synthesis of double Z-scheme CdS/Bi2O2CO3/BiOCl heterojunction photocatalysts for degradation of rhodamine B under visible light9
A novel approach for complex sensitization of semiconductors: immobilizing the complex using covalent linkage9
Synthesis of ethylphenols and xanthenes via reaction of calcium carbide and phenol: experimental and theoretical studies9
Microwave-promoted continuous flow synthesis of thermoplastic polyurethane–silver nanocomposites and their antimicrobial performance9
Bayesian based reaction optimization for complex continuous gas–liquid–solid reactions9
Technoeconomic analysis of fine chemical electrosynthesis: a case study using electrooxidation of 2-methylnaphthelene to vitamin K39
Flow synthesis of an α-amino boronic ester as a key precursor of bortezomib drug9
Interaction of light with gas–liquid interfaces: influence on photon absorption in continuous-flow photoreactors9
Insights into performances of magnetic and bio-based doped-nanohydroxyapatites as water decontamination agents9
Closed-loop identification of enzyme kinetics applying model-based design of experiments9
Antibiotic residue derived solid acids for ethanolysis of furfuryl alcohol into ethyl levulinate9
Performance of integrated multi-stage catalytic conversion of CO2 to solid carbon via RWGS–Boudouard coupling9
A multistep (semi)-continuous biocatalytic setup for the production of polycaprolactone9
A simple redox model of low-T NO + CO adsorption onto Pd-CHA as effective passive NOx adsorbers9
Efficient removal of organic dyestuff in water contamination over a MOF-derived Co-based adsorbent9
Development of a high intensity parallel photoreactor for high throughput screening9
First-principles calculations of the excited states of monolayer g-TPYP-COF9
Direct synthesis of tetraalkoxysilanes in a high-pressure mechanochemical reactor9
Front cover8
Ag-doped Ni/SiO2 catalysts for the synthesis of aromatic amines from aromatic phenol8
Scalable phase-rich mixed oxide/perovskites: hetero-interfacial tuning catalysed photocatalysis via pH/temperature regulations8
Carbonylations in flow: tube-in-tube reactor vs. gas–liquid slug flow8
Back cover8
Tantalum doped La0.6Sr0.4FeO3−δ electrodes for symmetrical proton conducting solid oxide fuel cells8
Development of an automated platform for monitoring microfluidic reactors through multi-reactor integration and online (chip-)LC/MS-detection8
Linear scaling relationships in homogeneous photoredox catalysis8
Development of a fully automated continuous, integrated production system for all reaction processes of ibuprofen8
Efficacy of mechanochemically prepared ceria–zirconia catalysts in ketonisation of acetic acid8
Optical monitoring of the anodic dissolution of zirconium and the agglomeration of potassium hexachlorozirconate during transpassive dissolution in molten LiCl–KCl salt8
CO2 hydrogenation to olefins in a microwave-thermal hybrid heating reactor8
Contents list8
Front cover8
Computer aided recipe design: optimization of polydisperse chemical mixtures using molecular descriptors8
Surface hydroxyl groups: the key to a CrOx/TiO2 catalyst for efficient catalytic oxidation of 2,2′-hydrazine diisobutyronitrile8
Identifying the ideal thermodynamics of non-stoichiometric oxygen-carrier materials for chemical looping water-gas shift8
Back cover8
A one-pot biocatalytic and organocatalytic cascade delivers high titers of 2-ethyl-2-hexenal from n-butanol8
Effects of acid addition on transfer hydrogenolysis of aromatic ethers in hot-compressed 2-propanol over Ni catalyst8
Continuous oxidation of toluene derivatives to aromatic aldehydes in an umbrella-shaped microchannel reactor8
Highly modular PDMS microwave-microfluidic chip reactor for MAOS applications8
Front cover8
Novel TPMS carbon-based monolithic catalysts by three-dimensional printing for enhancement of nitrobenzene hydrogenation reaction8
Formation of the E-isomer as an impurity in the optimized flow synthesis of a Z-α-thio-β-chloroacrylamide; E/Z photoisomerization in batch and flow, and solid state charact8
PEGMAs with short and long side chains: what is the effect in the formation of stars and brushes by RAFT polymerization?8
A solvent-selection strategy for the hydrogenation reaction inside a tubular-flow reactor through a statistical approach8
Extracting kinetic information in catalysis: an automated tool for the exploration of small data8
Accelerating reaction modeling using dynamic flow experiments, part 1: design space exploration8
Production of aromatics from butanol over Ga-promoted HZSM5 catalysts: tuning of benzene–toluene–xylene and ethylbenzene (BTEX) selectivity8
Reaction kinetics and pathways of crotonic acid conversion in sub- and supercritical water for renewable fuel production8
Recent advancements in the electrocatalytic conversion of furfural to 2-methylfuran8
Quantification of extracrystalline acid sites in MFI zeolites after post-synthetic passivation treatments using mesitylene benzylation kinetics8
A novel ultra-high vacuum diffusion setup to study Knudsen diffusion8
Palladium particle-catalyzed selective butadiene hydrogenation: effect of covalent organic framework modification8
An innovative sequential flow platform for automated multi-step chemical processes – proof of concept with the separation of amine/alkene model mixtures7
Magnetically agitated continuous-flow tube reactors with aspartate ammonia-lyase immobilized on magnetic nanoparticles7
Multi-angle evaluation of kinetic Monte-Carlo simulations as tool to evaluate the distributed monomer composition in gradient copolymer synthesis7
Synthesis of a sustainable and robust heterogeneous TEMPO catalyst utilizing activated carbon for aerobic alcohol oxidation7
Integrated electrified reactor system for efficient CO2-to-syngas conversion via e-methanation and e-POM7
How the addition of a polar aprotic solvent alters aldol-addition kinetics: exploring the role of solvent molecules and their dynamics7
Synthesis of methyl benzoate intensified by p-toluenesulfonic acid-based deep eutectic solvents7
Carboxymethyl cellulose–poly-m-phenylenediamine composite membrane for gold recovery from e-waste7
High-yield, fast, and green synthesis of acridine derivatives using a Co/C catalyst from rice husks with a microwave-assisted method7
The road to green efficiency: exploration of multicomponent reactions from transition metal catalysis to no catalyst conditions7
Residence time distribution effects on continuous-flow reaction in a polymer gel-based porous monolith: investigation of an asymmetric reaction with supported Hayashi–Jørgensen catalysts7
A combined experimental and multiscale modeling approach for the investigation of lab-scale fluidized bed reactors7
Recent development and challenges in TMD-based 2D materials towards OER/ORR electrocatalysis7
Pyrolysis of sargassum in a single mode microwave cavity: use of SiC and biochar as microwave absorbers7
Mono- and sym-pentahalogenated corannulenes: reaction optimization & purification by in process product analysis7
Efficient removal of dibutyl phthalate from aqueous solutions: recent advances in adsorption and oxidation approaches7
Preparation of a Ga-doped MnMoO 4 porous flower-like structure and study on its supercapacitor performance7
Hydrogenation of furfural to furfuryl alcohol over MOF-derived Fe/Cu@C and Fe3O4/Cu@C catalysts7
Electrocatalytic effect of Co3V2O8 nanospheres loaded on Cu-doped MoS2 nanosheets toward enhanced oxygen reduction reaction7
Designing biomimetic hydrogels for neuro-therapeutic delivery devices for brain soft tissue injury: integrating antioxidant, cell viability and tissue adhesion properties to enhance neural regeneratio7
0.096740961074829