OOIR: Observatory of International Research

Papers

(The median citation count of Johnson Matthey Technology Review is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)

Article	Citations
In the Lab: A Biotechnology and Biological Sciences Research Council Network in Industrial Biotechnology and Bioenergy	26
Towards the Enhanced Mechanical and Tribological Properties and Microstructural Characteristics of Boron Carbide Particles Reinforced Aluminium Composites: A Short Overview	25
In the Lab: The Use of Recovered Metal Complexes in Catalysis	19
On the Criticality of Palladium in Organic Synthesis: A Perspective	18
“Characterization of Minerals, Metals, and Materials 2023”	18
Johnson Matthey Highlights	18
Comparative Analysis of Single Atom Catalysts and Single-atom Alloy Catalysts for CO2 Methanation	13
Impact of the Proposed Euro 7 Regulations on Exhaust Aftertreatment System Design	11
Johnson Matthey Highlights	10
Flame, Combustion and Explosion Thermometry	10
Guest Editorial: Johnson Matthey and Diversity	10
A Comprehensive Review on Developing of the Utilized Reactor Design for Oxidative Desulfurization Technology: Oscillatory Baffled Reactor: Part I	10
A Systematic Literature Survey, Research Challenges and Future Directions of Image Processing Algorithms in Solar Tracking System	10
Additive Manufacturing of Platinum Alloys	9
Catalyst Deactivation Modes of PdO/γ-Al2O3 Catalysts for Lean Methane Oxidation	9
Using Spraying as an Alternative Method for Transferring Capsules Containing Shea Butter to Denim and Non-Denim Fabrics	9
Guest Editorial: Facility Process Safety and Control	8
Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part I	8
Johnson Matthey Highlights	8
Properties of Additively Manufactured Platinum-Rhodium Alloys	8
The Effect of Platinum Single Atoms in Titania for Photocatalytic Applications	8
“Introduction to Particle Technology”	7
Research on Several Factors Affecting the Test of Thermal Expansion Coefficient of Glass Materials	7
Hotspot Research on Ozone in Environmental Catalysis: A Bibliometric Analysis	7
Microbubble Intensification of Bioprocessing	6

Hydrogen Storage and Transportation Technologies to Enable the Hydrogen Economy: Liquid Organic Hydrogen Carriers	6
Johnson Matthey Highlights	6
Data-Driven Modelling of a Pelleting Process and Prediction of Pellet Physical Properties	6
Extension of a Zero-Dimensional Mixing-Controlled Combustion Model for the Development of a NOx–Free System Based on the Oxy-Combustion Concept	6
Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part I	6
“Sustainable Carbon Capture – Technologies and Applications”	5
Tribological Models for Erosive Wear in Slurry Flow: A Review: Part II	5
Combining State of the Art Open Source and Proprietary Machine Learning Technologies to Build a Data Analysis Pipeline for Gasoline Particulate Filters using X-Ray Microscopy, Focused Ion Beam-Scannin	5
Structural-Phase State of Austenitic 20GL Steel After Thermal Treatment by Normalising and High-Temperature Tempering	5
Stability and Applicability of Retinyl Palmitate Loaded Beeswax Microcapsules for Cosmetic Use	5
Editorial: 10th Anniversary of Johnson Matthey Technology Review	5
Contents	5
Development of New Mixed-Metal Ruthenium and Iridium Oxides as Electrocatalysts for Oxygen Evolution: Part II	4
Centralised and Localised Hydrogen Generation by Ammonia Decomposition	4
“Simulations in Bulk Solids Handling: Applications of DEM and Other Methods”	4
Comparative Short-Term Stability of TiO2- and SiO2-Coated Fuel-Cell Catalysts in Acid Electrolytes: A Systematic Review	4
Influence of Temperature and Orientation on Elastic, Mechanical, Thermophysical and Ultrasonic Properties of Platinum Group Metal Carbides	4
Advancements in Green Ammonia Production and Utilisation Technologies	4
Structural and Electrochemical Characterisation of NBZFO Cobalt-Free Cathode Material for Intermediate-Temperature Solid Oxide Fuel Cells: An Experimental Investigation	4
Technical Evaluation and Comparative Analysis of Diverse Maximum Power Point Tracking Algorithms Utilising a Boost Converter with Renewable Energy Sources	4
Amine Synthesis Using the Amine Donor N-Phenyl Putrescine and the Johnson Matthey Transaminase Biocatalyst Library	4
Tribological Models for Erosive Wear in Slurry Flow: A Review: Part I	4
Comparative Study of Radiative Heating Techniques for Fast Processing of Functional Coatings for Sustainable Energy Applications	4
Unlocking the Potential of Single-atom Alloy Catalysts for Hydrogenation of CO2 to Methane and Methanol	4
Porous Metallic Implants from Additive Manufacturing to Biocorrosion: A Review	4
In the Lab: Spotlight on Surface Characterisation Activities at Johnson Matthey	4
Photoelectrochemical Hydrogen Evolution Using Dye-Sensitised Nickel Oxide	3
A Review of the Sources, Environmental Behaviours and Human Health of Atmospheric Microplastics	3
Rhodium and Rhodium-Alloy Films and Nanoparticles: Part II	3
Opportunities for Innovation in the Circular Economy	3
Accelerating the Design of Automotive Catalyst Products Using Machine Learning	3
Guest Editorial: The Continuing Importance of Platinum Group Metals	3
Utilisation of Insect Gut as a Biosource for the Development of Future Biotransformation Processes	3
Guest Editorial: Advanced Characterisation and the Net Zero Transition	3
Active Sites of Cu/ZnO-Based Catalysts for CO2 Hydrogenation to Methanol: Part II	3
Contents	3
“Hydrogen Technologies”	3
Utilising Machine Learning for the Automated Characterisation of In Situ Electron Microscopy Experiments with Catalytic Systems	3
Pt/Al2O3 with High Metal Loading Catalysts for the Hydrogenation of Nitrobenzene	3
Contents	3
Proportional Integral Derivative-Based Closed-Loop Voltage Mode Control for Addressing Non-Idealities in Ćuk Converters for Renewable Energy Application	3
Experimental Investigation of Single Cylinder Diesel Engine by Using Cetane and Octane Based Fuels	2
X-Ray Computed Tomography for Failure Mechanism Characterisation within Layered Pouch Cells: Part I	2
The Development of Rare Earth Based Permanent Magnets and Its Relation to the Circular Economy	2
Evaluation of Antibacterial Potencies of Eight Lichen Extracts Against Gram-Positive Moderately Halophilic Bacteria	2
Contents	2
Cathodes for Electrochemical Carbon Dioxide Reduction to Multi-Carbon Products: Part I	2
Autonomous Structural Health Monitoring and Remaining Useful Life Estimation of Floating Offshore Wind Turbine Cables: Part II	2
Navigating the Building Energy Efficiency Research Landscape: Bibliometric Analysis and Literature Review (2003–2023): Part I	2
A Review on the Production of Sustainable Aviation Fuels from Biomass and Wastes using Pyrolysis Technologies: Part I	2

Examination of the Coating Method in Transferring Phase-Changing Materials	2
“Biotechnology Entrepreneurship: Leading, Managing and Commercializing Innovative Technologies”	2
Chemical Networks: A Methodology to Rapidly Assess the Environmental Impact of Chemical Processes	2
The Suitability of the Three-way Catalyst for Hydrogen Fuelled Engines	2
Ultrasonic Interactions with Microstructural Defects in Platinum Group Metal Nitrides	2
Experimental Study of the Phase Relations in the Ternary Gold-Palladium-Titanium and Gold-Rhodium-Titanium Systems at 1000°C	2
End-of-Life Plastics Management: A Review	2
Long-term Evaluation of Culturable Fungi in a Natural Aging Biofilm on Galvanised Steel Surface	2
Frustrated Lewis Pairs for Metal-free Hydrogenation Catalysis	2
“Sustainable Materials for Transitional and Alternative Energy”	2
Autonomous Structural Health Monitoring and Remaining Useful Life Estimation of Floating Offshore Wind Turbine Cables: Part I	2
Johnson Matthey Highlights	2
“In Silico Dreams: How Artificial Intelligence and Biotechnology will Create the Medicines of the Future”	2
Study on the Mechanical Properties of Zirconium Reinforced Platinum-Gold Alloy	2
Guest Editorial: Industrial Biotechnology	2
Challenges and Opportunities for Platinum in the Modern Three-Way Catalyst	2
Potential of Hydrogen Internal Combustion Engine for the Decarbonised Passenger Vehicle	2
Rhodium and Rhodium-Alloy Films and Nanoparticles: Part I	2
Review of Recent Progress in Green Ammonia Synthesis	2
Revised Crystallographic Properties of Osmium	2
Guest Editorial: Recover, Renew, Reimagine – Industrial Decarbonisation	2
Advertisement: Johnson Matthey Virtual Platinum Group Metal Conference 2023	1
The Kelvin Redefinition and Practical Primary Thermometry	1
Guest Editorial: Emissions Standards Delivering Cleaner Air on the Road to Net Zero	1
Bacterial Kinetics for Control of Shape and Biogenic Synthesis of Nanoparticles: A Review	1
Intelligent Retrieval Paradigm for Solar Sustainability	1
Effectiveness Evaluation of Pyrometallurgy and Hydrometallurgy Methods in The Recycling Process of Neodymium-Iron-Boron Permanent Magnet and Rare Earth Metals Recovery: A Review	1
Direct Ammonia Fuel Cells	1
Contents	1
Challenges of Coating Textiles with Graphene	1
Johnson Matthey Highlights	1
Reactive Power Observability for Improved Voltage Stability and Loadability: A Detailed Review	1
Magnetron Sputtering of Antibacterial and Antifungal Tantalum-Copper and Niobium-Copper Coatings on Three Dimensional-Printed Porous Titanium Alloy Scaffolds: Part II	1
A Brief Review on Additive Manufacturing Processes for Lightweight Metal Matrix Composites	1
Exploration of Single Atom Alloy Catalysis for Industrial Applications: Part II	1
Johnson Matthey Highlights	1
The Membrane Catalyst-Film Reactor (MCfR) Extends PGM Capability for Water Purification	1
Adsorption of Transition Metal Catalysts on Carbon Supports: A Theoretical Perspective	1
In the Lab: Heterogeneous Catalysis Mediated Interconversion between NAD(P)+ and NAD(P)H Accompanied by Consumption and Generation of Hydrogen	1
Reactive Power Observability for Improved Voltage Stability and Loadability: A Detailed Review	1
Exploration of Single Atom Alloy Catalysis for Industrial Applications: Part I	1
Contents	1
Analysis of Liquid Organic Hydrogen Carrier Systems	1
Synthesis and Characterisation of Cellulose Acetate/Polyethylene Glycol Membrane from Pineapple Hump by Phase Inversion Method	1
Unveiling the Potential of Platinum in Homogeneous Catalysis: A Review of Pt-NHC Chemistry and Pt-Catalysed Hydrosilylation Reactions: Part II	1
Mutual Connection Between Concentration of Charge Carriers and Seebeck Coefficient in Si0.96Ge0.04 Thermoelectric by Annealing in the Range 523–673 K	1
Guest Editorial	1
Johnson Matthey Highlights	1
Pd/ZrO₂-TiO₂ Catalyst for Reductive Amination of Furfural: Exploring Solvent and N-Substrate Effects	1
Fabrication of Two-Dimensional Material Membranes	1
Microplasma-Sprayed Titanium and Hydroxyapatite Coatings on Ti6Al4V Alloy: in vitro Biocompatibility and Corrosion Resistance: Part II	1
Three-Dimensional Oldroyd-B Fluid Flow Past a Stretching Surface with Magnetic Field, Nanofluid Particles and Cattaneo-Christov Double Diffusion Effects	1
Migration of Platinum Nanoparticles via Volatile Platinum Dioxide during Lean High-Temperature Ageing of Diesel Oxidation Catalysts	1
Screening of Bioactive Compounds for Biomedical and Industrial Uses from Actinobacteria Isolated from the Parsık Cave, Turkey	1
Enhancing Microbial Electron Transfer Through Synthetic Biology and Biohybrid Approaches: Part II	1
Impact of Solution Chemistry on the Biotechnological Synthesis and Properties of Palladium Nanoparticles	1
Knowledge Structure of New Energy Vehicle Policy Research	1
Nitrides, Hydrides and Carbides as Alternative Heterogeneous Catalysts for Ammonia Synthesis: A Brief Overview	1
Advanced Supports for Noble Metal Catalysts in Proton Exchange Membrane Water Electrolysers: A Review	1