Materials Research Express

Article	Citations
Experimental study of the effect of the concentration of water/polyalkylene glycol solutions on heat transfer in steels subjected to quenching	96
Antibacterial mechanism of Xiuyan jade mineral waste as a natural inorganic antibacterial agent	76
Understanding the effect of aging treatment on the electrical properties of Al-4Cu (wt.%) alloy	66
The low and high temperature thermoelectric properties of Yb3Si5	61
Phase and surface structures-optical transmittance correlation of sputtered Al-doped ZnO film on glass substrate	58
Improvement of mid-temperature ZT in a Bi-Se-Te via a two two-step sintering process	58
A phenomenological theory-based viscosity model for shear thickening fluids	53
A numerical approach to characterize the compression and relaxation behavior of uncured prepreg laminates in the process of hot press-forming	53
Properties of alkali activated masonry units incorporating Linz-Donawitz (LD) steel slag aggregates and Mangalore tile waste (MTW)	52
Effect of trace Al and Ca co-addition and solution treatment on the microstructure and mechanical properties of Mg-10Gd alloys	51
Overview: focus on laser-based manufacturing and materials processing	49
Green biogenic synthesis of magnetite nanoparticles from indigenous Banksia Ashbyi leaf for enhanced sonochemical dye degradation	48
Synthesis and characterization of boiled linseed oil integrated with and without reduced graphene oxide nanosheets blended microcapsules	48
The behavior of hydrothermally synthesized hematite nanorods prepared on spin coated seed layers	48
VO2-Based metasurface for dynamically tunable terahertz surface plasmonic waves	48
Finite element analysis and experimental approaches of mono and hybrid nanocellulosic composites under tensile test	47
Multivariate process capability analysis for evaluating metal additive manufacturing via electron beam melting	46
Measurement of the thermal properties of materials by the hot plate method considering the convection coefficient around the device	45
Study on corrosion characteristics of Q235 steel in seawater, soil and dry-wet alternating environments focusing on Shengli oilfield	45
Shift of plasmon resonance in silver nanoparticles: effect of magnetic field pre-treatment	41
Synthesis of a Zn/Fe–N–C electrocatalyst towards efficient oxygen reduction reaction via a facile one-pot method	40
Performance study of a new epoxy resin IR-3 in HTS-based high-field magnet application	40
The crucial role of defect structure in understanding the electrical properties of spark plasma sintered antimony doped barium stannate	39
Porous Ni-Cr-Mo-Cu alloys fabricated by elemental powder reactive synthesis	39
The Effect of Sr composition on the microstructure and mechanical properties of Al-Si-Zn filler for the brazing of AA6061	37

Influence of inconel interlayer on microstructural, mechanical and electrochemical characteristics in single-pass ATIG welding of dissimilar austenitic and duplex stainless steel	35
Functional properties of expanded austenite generated on AISI 316L by plasma nitrocarburizing using different active screen materials	35
Microwave absorption properties in Ku-band of micro ferrite based on natural ferrite from iron sand prepared by high energy ball milling	34
Effect of Cu/Bi ratio on the photoelectrochemical performance of CuBi2O4/CuO nanocomposite films for CO2 reduction	34
Temperature annealing dependence of structural, magnetic, and antibacterial properties of silver substituted cobalt ferrite nanoparticles produced by coprecipitation route	33
Effect of glass powder on mechanical properties and durability of modified polystyrene particle concrete	33
Effect of tempering process on the mechanical properties and corrosion resistance of E690 marine steel	32
Enzymatic and catalytic behaviour of low-dimensional gold nanomaterials in modular nano-composite hydrogels	31
Design evaluation of microwave transmission properties of YBa2Cu3O7-based kinetic inductance detectors	29
Effect of Y2O3 on thermophysical parameters and mechanical properties of Al-Al2O3 composites and compatibility with high temperature Al-Si alloys	28
Solidification structure and high temperature oxidation resistance of nano titanium dioxide TiO2 added Inconel 718 deposits by arc melt	27
All-dielectric electromagnetically induced transparency-like metasurface with breaking symmetric	26
Numerical simulation of extremely severe corrosion of the STK400 graded steel pipe pile in Southern Vietnam’s brackish environment: effects on macrocell corrosion of seawater flow and tide	26
Global imaging for polarization resolved second harmonic generation of WS2 monolayers	26
A closed-form expression of effective permittivity with spherically symmetric function for honeycomb structure	26
Simulation analysis of deformation spring-back of free-form surface composite with cellular foam filling	25
Study on corrosion resistance of HAZ and TMAZ in friction stir welding joint of 7075 aluminum alloy by thermal simulation	25
Room temperature creep behavior of a single crystal nickel-based alloys	25
Structural conductive carbon nanotube nanocomposites for stretchable electronics	24
Properties and microstructure regulation of electrodeposited ultra-thin copper foil in a simple additive system	24
Optimization for preparing Bi1.68Pb0.32Sr1.75Ca1.85Cu2.85O10+y powders by wet ball milling	24
Effect of varying molarity and curing conditions on the mechanical and microstructural characteristics of alkali activated GGBS binder	24
Computational analysis of austenite film thickness and C-redistribution in carbide-free bainite	24
Enhanced machining performance using a hybrid cryogenic CO₂ and TIO₂ nanofluid minimum quantity lubrication (Cryomql) system	23
Preparation and antibacterial activity of graphene oxide/cuprous oxide/zinc oxide nanocomposite	23
Effect of lithium slag on freeze-thaw resistance of concrete	23
Phase transitions of alkaline-earth metal sulfides under pressure	22
Dual photosensitizers material for photodynamic theraphy	22
Road performance analysis of cement stabilized coal gangue mixture	22
Ag, Au and ZrO2@reduced graphene oxide nanocomposites; Pd free catalysis of suzuki-miyaura coupling reactions	21
Antibacterial, efficient and sustainable CS/PVA/GA electrospun nanofiber membrane for air filtration	21
First-principle study of highly controllable boron-doped graphene (BC20) as a high-capacity anode for potassium-ion batteries	21
CuO/rGO nanocomposite as an anode material for high-performance lithium-ion batteries	21
Corrigendum: Electro-brush plating Ni-Graphene oxide composite coating enhanced corrosion resistance of fluorideion ((2021) Mater. Res. Express 8 026406)	21
Zr alloying effects on the microstructure, compression performance and oxidation resistance of refractory high entropy alloys	21
Simulation analysis of cryogenic mechanical properties of carbon fiber reinforced silicon-containing epoxy resin composite	21
Enhancement of infrared shielding property of SnO2 using Sb as a dopant	21
Dehydrochlorination study of plasticized poly(vinyl chloride) contianing modified titanium dioxide, cerium stearate, organotin and β-diketone complex after long-term storage	21
Influence of marine sand as fine aggregate on mechanical and durability properties of cement mortar and concrete	21
Design and microstructural analysis of the mixture proportion of alkali-activated fly ash-slag composite cementitious material	21
Facile thermal synthesis of g–C3N4/ZnO nanocomposite with antibacterial properties for photodegradation of Methylene blue	20
Effects of Cu doping on the phase transition and photocatalytic activity of anatase/rutile mixed crystal TiO2 nanocomposites	20
Heavily vanadium-doped LiFePO4 olivine as electrode material for Li-ion aqueous rechargeable batteries	20
Transport properties of binary phosphide AgP2 denoting high Hall mobility and low lattice thermal conductivity	20
Lead-free perovskites InSnX3(X = Cl, Br, I) for solar cell applications: a DFT study on the mechanical, optoelectronic, and thermoelectric properties	20
Simultaneous measurement of refractive index and temperature of seawater based on surface plasmon resonance in a dual D-type photonic crystal fiber	20
Sputtered vanadium carbon nitride (VCN) thin films: a potential electrode for supercapacitors	20
Tunable topology and berry curvature dipole in transition metal dichalcogenide Janus monolayers	20
Microstructure and mechanical properties of TiC reinforced NbC-Ni4VC4Mo2C cermets	20
Mechanical properties and strengthening mechanism of V-containing weathering steel	19

Constitutive equation and microstructure evolution of TiAl alloy during hot deformation	19
Theoretical analysis of structural, electronic, optical, and thermoelectric properties of XNaH2 (X = K, Rb) hybrid metal hydride composites	19
Pre-baked anode based on petroleum coke used as lithium-ion battery anode material	19
Impact of Al-doping on structural, electrical, and optical properties of sol-gel dip coated ZnO:Al thin films	19
A detailed electrochemical analysis of sensitized AISI 410 martensitic stainless steel	19
Syntheses, characterization, and suppression efficiency of silver & silver iodide nanoparticle for proliferation, migration, and invasion in follicular thyroid carcinoma cells	19
Study of thermal and mechanical behavior by analyzing reinforcement effect of graphene nanoplatelets on polyamide-66 composite system developed via melt-mixing technique	19
Foam stability and thermo-mechanical properties of micro/nano filler loaded castor oil based flexible polyurethane foam	18
Graphene's effect and mechanism on the properties of alkali-activated slag coating	18
Tribological properties of (Ti, Al)N films with different Al/Ti atomic ratios deposited by magnetron sputtering	18
Synthesis of Ag decorated TiO2 nanoneedles for photocatalytic degradation of methylene blue dye	18
Experimental investigation of shape memory polymer hybrid nanocomposites modified by carbon fiber reinforced multi-walled carbon nanotube (MWCNT)	18
Durable, self-cleaning and anti-fouling superhydrophobic coating based on double epoxy layer	18
Effect of fibre treatment and moisture content on the vibration and acoustic properties of the basalt/hemp hybrid composites	18
PVA and PMMA nano-composites: a review on strategies, applications and future prospects	18
An ultra-broadband flexible polarization-insensitive microwave metamaterial absorber	18
Effect on microstructure and mechanical properties of friction stir welded 5A06 aluminum alloy joints by deep cryogenic treatment	18
Gas permeability measurement in porous graphite under steady-state flow	18
A new study of the optical and structural characterization properties of p-type ZnS2 pyrite with an application in solar energy	18
Effect of Al and Cr alloying by arc cladding on the high-temperature oxidation resistance of MoSi2 materials	18
Properties of blown composite films of polypropylene/calcium carbonate and polypropylene/calcium oxide	17
Study on properties and biocompatibility of poly (butylene succinate) and sodium alginate biodegradable composites for biomedical applications	17
Microstructure and mechanical behaviors of Gasar porous Cu/G4335V steel joint brazed by Ag-28Cu-0.75Ni alloy	17
Thermoelectric performance enhancement of Mg2Si-based silicides synthesized in nitrogen atmosphere	17
Mathematical modelling of sensitization and desensitization in austenitic alloys using Gaussian-based peak models	17
Microstructure and shape memory properties of Cu-Al-Fe alloys with different Al contents made by additive manufacturing technology	17
An eco-friendly electric pulse treatment process for improving the microstructure and properties of cold-rolled pure copper sheet	17
A review on potential use of cerium oxide and doped cerium oxide as high dielectric constant seed layers for overgrowth of cerium oxide nanostructures	17
Design of hybrid MoS2/photonic devices compatible with technological constraints	16
Study on characterization technology of porosity and fractal dimension of micro-arc oxidation coating	16
Investigation of structural, morphological, thermal, and thermoelectric properties of Zn1−xCuxAl2O4 (0.0 ≤ x ≤ 0.1)	16
Microstructure and texture evolution of pure niobium in cold-drawn Mg+B/Nb/Cu wires	16
Analysis of the mechanical properties and microstructure of titanium surfaces designed by electromagnetic induction nitriding	16
The anti-fouling activity of solvothermally synthesized Nb2O5-coated Fe ship strip on optimal interactions at the targeted interfaces of barnacle attachments -An Insilico study	16
Conduction and stability performance of CsH2PO4 with NaH2PO4/ZrO2 for fuel cell	16
Study on the factors affecting the mechanical properties and recovery force of PLA/PEEK blends	16
Excellent photocatalytic degradation and antibiosis of WO3/Fe2O3 heterojunction	16
Effects of molecular diffusion length on area-selective growth of organic patterns	16
Effect of welding speed on mechanical properties and corrosion resistance rates of filler induced friction stir welded AA6082 and AA5052 joints	16
A lattice-mechanical metamaterial with tunable two-step deformation, tunable stiffness, tunable energy absorption and programmable properties	16
Ultra-thin foldable transparent electrodes composed of stacked silver nanowires embedded in polydimethylsiloxane	15
Electrical, optical and nonlinear optical process in spray pyrolyzed Zn:CuO nanostructures for optoelectronic device applications	15
Crystallization, rheological behavior and mechanical properties of carbon nanotube/metallocene polypropylene composites	15
Sputter deposition of Mo-alumina cermet solar selective coatings: Interrelation between residual oxygen incorporation, structure and optical properties	15
Fatigue performance of butt-welded austenitic stainless-steel joints evaluated by peak-stress method	15
Research progress of rare earth light conversion agent materials for agricultural film	15
Physical simulation on Joining of 700 MC steel: A HAZ and CCT curve study	15
Study on adsorption behaviours of bovine serum albumin on CoCrMo alloy and Al2O3 ceramic surfaces	15
Controlled growth mechanism of ring-like In(Ga)As quantum Dot pairs on GaAs ring-ring-disk nanostructures templates	15
Abnormal grain growth under solution-aging treatments enables convergence mechanical properties of a Fe-Ni-Cr based austenitic alloy	15
Structural, electrical and dielectric properties of ZnFe2O4/Cu2S 3D heterostructures	15
Color-tunable photoluminescence and persistent luminescence in a single LiYGeO4:Tb3+ phosphor	15
Microcurrent behavior of core-shell droplet deposition in coaxial electrohydrodynamic printing	15
Effect of CrYN/TiBN coating on friction performance and corrosion resistance of 316 stainless steel in artificial seawater	15
The hot deformation behaviors and constitutive modeling of Hastelloy C276	15
Study of the temperature dependence of a carbidized layer formation on the tungsten surface under plasma irradiation	15
Gradient self-organized dislocation in expanded austenite layer during low-temperature nitriding	15
Densification mechanism and microstructural evolution of Si3N4 composites with CeO2 as additives during spark plasma sintering	15
Revealing the journey of molecules and particles in heterogeneous, porous materials for cigarette filters	14
Hydrothermal synthesis of WO3 film on rough surface to analyze methanol gas at room temperature	14
Surface roughness and gloss retention of bioactive resin composite after simulated toothbrush abrasion	14
On the mechanical, microstructural, and corrosion properties of pulsed gas tungsten arc and friction stir welded RZ5 rare earth grade magnesium alloy	14
Impacts of T6 heat treatment on the microstructural, mechanical, and corrosion properties of thixoformed AA7075 alloy produced by cooling slope casting	14
Preparation and characterization of quarter-wave plate at 12.4 μm based on CdSe single crystal	14
Quantification of static softening process and its effects on work hardening characteristics of a typical high strength steel during multi-pass deformation	14
Numerical simulation and experimental investigation on friction stir welding of AZ31 magnesium alloy	14
Simultaneous effect of activated carbon and chlorophyll pigment from leaves of acacia nilotica on the enhancement of electron transfer in DSSC applications	14
A green synthesis of CuInS2/MIL-101(Cr) nanocomposite with efficient visible light induced photocatalytic activity	14
Analysis of processing efficiency, surface, and bulk chemistry, and nanomechanical properties of the Monel® alloy 400 after ultrashort pulsed laser ablation	14
Experimental study on the mechanical behavior of laminates made by fiber steering: influence of fiber angle and tow width	14
Preparation and properties of all solid-state electrochromic devices based on tungsten oxide nanocomposites	14
Effects of early stages of prestretching on the aging kinetics in Al–Cu–Li–based alloy	14
Effect of Ni element on microstructure and properties of cold-rolled 316 L austenitic stainless steel	14
Erratum: Analysis of processing efficiency, surface, and bulk chemistry, and nanomechanical properties of the Monel® alloy 400 after ultrashort pulsed laser ablation (2024 Mater. Res. Expre	14
Experimental investigation on electrochemical discharge machining of hastelloy	14
Adsorption performance of magnetic Mg0.5Ni0.5Fe2O4 nanoparticles for reactive red 2BF	14
PdCu nanoparticles with multienzymatic activity to treat tumors through the synergistic photothermal and chemodynamic therapy	13
The structural, magnetic, optoelectronic, and mechanical characteristics of NaGeX3 perovskites under pressure for soler-cell applications	13
Quantitative analysis of rare earth elements in Mg–Zn–RE(Ce, Y, Gd)–Zr alloy	13
Size-dependent frequency of simply supported elastic ultra-thin films with surface effect under periodic vibration	13

Using digital image correlation to evaluate fracture toughness and crack propagation in the mode I testing of concretes involving fly ash and synthetic nano-SiO2	13
Effect of microstructural rearrangement as a result of annealing on the corrosion behavior of 7075 aluminum alloy	13
Nanostructure characteristics of three types of platelet-rich fibrin biomaterial: a histological and immunohistochemical study	13
Immobilization of La on THH-CO2H@Fe3O4 nanocomposite for the synthesis of one‐pot multicomponent reactions	13
An insight into advance self-healing composites	13
CO2 capture by alcohol ammonia based deep eutectic solvents with different water content	13
Pomegranate arils extract as a green corrosion inhibitor for mild steel: effect of concentration and temperature in hydrochloric acid	13
Regression model-based parametric analysis of drilling of multi-walled carbon nanotubes-added glass fiber composite laminates	13
Strength and freeze-thaw cycle resistance of cement stabilized coastal clay mixed with shell powder	13
Preparation and properties of epoxy resin modified with phosphorus and nitrogen flame retardants	13
Deformation behavior of a new Ni-Co base superalloy GH4251 during hot compression	13
Development of nanometer-thick graphite film extreme ultraviolet pellicle with hydrogen-resistant TiN capping layer	13
Study on fatigue crack growth of electron beam selective melting of titanium alloy	13
Impact of sulfur content on thermo-capillarity and melt pool dynamics in laser powder bed fusion of 316L powders	13
Vat polymerization 3D printing of composite acrylate photopolymer-based coated glass beads	13
AC conductivity, dielectric and thermal properties of three-phase hybrid composite: PVA/Bi2O3/cotton microfiber composite	13
Investigation of epoxy composites for outdoor insulation under accelerated ultraviolet exposure	13
A compact frequency-selective absorber with optical transparency	13
Experimental investigation on the influence of sonication parameter for enhancing the mechanical properties of cement mortar with graphene oxide integration	13
Preparation and flame retardancy of an Al2O3 infiltration layer on polycarbonate surface	13
Influence of scandium interlayer on the mechanical and metallurgical characteristics of friction stir welded AA1200-H14/ Sc/AA6061-T6	12
Study on strength, durable and flexural behaviour of partial replacement of sugarcane bagasse ash over cement	12
Investigation of the influence of process parameters on crack formation and mechanisms in Ti-48Al-2Cr-2Nb alloy via laser directed energy deposition	12
Development of an Al-Zn-Bi alloy sacrificial anode for the protection of steel in artificial seawater: an electrochemical analysis	12
Micro-structural analysis on stress displacement and crack evolution of porous asphalt mixture based on DEM	12
Investigation on mineralization performance and spore germination conditions of calcium carbonate mineralizing bacteria	12
Exploring the photocatalytic degradation of organic textile dye using hydrothermally synthesized Ce-doped metal chalcogenide nanomaterial	12
Fabrication of protein-coated titanium dioxide nanoparticles for cellular uptake fluorescence imaging and treatment of colorectal cancer	12
Performance evaluation of p-type Cr2O3 thin films grown by reactive DC magnetron sputtering for Schottky diode applications	12
New insight into the relationship between the C-Cr ratio and carbides, mechanical property of cold working die steel	12
Theoretical investigation of the temperature characteristics and output parameters of an industrial crystalline silicon solar cell with a microfluidic cooling system	12
Finite element simulation on residual stress during immersion quenching and pre-stretching of Al7055 thick plates	12
Impact of drilling parameters on the surface roughness of egg shell filled glass fibre/polyester composites	12
Silver-graphene oxide nanocomposite doping chitosan/PVA membrane for arsenic (III) elimination from aqueous solution	12
Effect of heat treatment on structure and mechanical properties of basalt fibers and its application for fabrication Cu based composite	12
Effects of film thickness and annealing temperature on the properties of molybdenum carbide films prepared using pulsed direct-current magnetron sputtering	12
Thermal degradation of naturally aged NBR with time and temperature	12
Oxidation of soot promoted by Fe-based spinel catalysts	12
Surface roughness of pigmented and non-pigmented maxillofacial silicone elastomer before and after artificial aging	12
Analyzing the performance impact on metallic foams: a comprehensive overview	11
Achievement of ultra-high strength in 45Si2MnCr2Mo steel via efficient and low-energy tempering	11
Study on notch tensile properties of Fe-Mn-Si shape memory alloy	11
Experimental and numerical investigation of metal-polymer riveted joints	11
Detection of ethanol gas at room temperature by In2O3-based screen-printed films fabricated through particle-free aqueous solution combustible inks	11
Study on the bonding mechanism of multilayer copper with nickel sheet in ultrasonic welding process	11
Ni doped carbon-based composites derived from waste cigarette polypropylene filter rod with electromagnetic wave absorption performance	11
Development of bio fabricated gold nanoparticles for disinfectant applications in impregnated medical gloves to improve the personal protection during the nursing care	11
Design optimization of lightweight structures inspired by the rostrum in Cyrtotrachelus buqueti Guer (Coleoptera: Curculionidae)	11
Application of green-synthesized cerium oxide nanoparticles to treat spinal cord injury and cytotoxicity evaluation on paediatric leukaemia cells	11
Comparative study of cell interaction and bacterial adhesion on titanium of different composition, structure and surfaces with various laser treatment	11
Effect of adsorption interactions of Arabic gum with cement	11
Floquet topological phases on a honeycomb lattice using elliptically polarized light	11
Intense luminescence in nanostructured germanate glass	11
Development and mechanical characterization of horse hair with titanium dioxide nanoparticles reinforced polyester composite	11
Evaluation of the physical properties and filtration efficiency of PVDF/PAN nanofiber membranes by using dry milk protein	11
Effects of PTFE coating modification on tribological properties of PTFE/aramid self-lubricating fabric composite	11
Assessing the quality of large-area monolayer graphene grown on liquid copper for size-selective ionic/molecular membrane separations	11
Magnetostriction and volume magnetostriction of sputtered Tb20Fe24Co56 film	11
Antibacterial efficacy of greenly synthesized silver nanoparticles using nanocurcumin and silver nanoparticle gel on bovine mastitis	11
Fabrication of GeS-graphene composites for electrode materials in lithium-ion batteries	11
Multi-response optimisation of wire-arc additive manufacturing process parameters for AISI 4130 steel during remanufacturing process	11
Copper-based metal-organic framework for highly efficient adsorption of lead ions from aqueous solution	11
Optimization of SiC reinforced Al7039/Cu composites for enhanced thermal conductivity and hardness via response surface methodology	11
An experimental study of friction stir welding parameters effect on joint properties of aluminium alloy and copper plate	11
Enhancement of the near-band-edge electroluminescence from the active ZnO layer in the ZnO/GaN-based light emitting diodes using AlN-ZnO/ZnO/AlN-ZnO double heterojunction structure	11
Effect of addition of Ce and accumulative roll bonding on structure-property of the Mg-Ce-Al hybrid composite and its prediction and comparison using artificial neural network (ANN) approach	11
TiO2−x films for bolometer applications: recent progress and perspectives	11
Effect of tin doping and tin-bromine co-doping on electronic and optical properties of BiOCl crystal: density functional theory	11
Effect of various fuels used in combustion synthesis on the bioactivity of akermanite	11
Flame-retardant polymethacrylimide foams modified by grafting with amino-terminated phosphorous polyborosiloxane	11
Relative molecular orientation can impact the onset of plasticity in molecular crystals	11
Microstructure and twin behavior of Ti-2Al-2.5Zr during cold pilgering	11
Microstructure, corrosion behavior and rust resistance of Ti and Ce added invar alloys	11
Experimental investigation on the hydrogen embrittlement characteristics and mechanism of natural gas-hydrogen transportation pipeline steels	11
Challenges and recent progress in carbon-based nanocomposites for sportswear and sensing applications	11
DFT-continuum characterization of third-order elasticity of sI methane hydrates under pressure	10
The Effect of Phosphorus Addition on the Age-Hardening of Cu-Ni-Ti Alloy	10
A modified TCAD simulation model for a-InGaZnO based ISFETs on GaAs substrate for pH sensing applications	10
Influence of incommensurate structure on the elastic constants of crystalline Bi2Sr2CaCu2O8+δ by Brillouin light scattering spectroscopy	10
Tailoring magnetic exchange coupling in Zr2Co11/FeCo nanocomposites via dual-source inert gas condensation: a one-step synthesis approach	10
Design of acrylamide-based thermoresponsive copolymer with potential capability for physical network formation in water: a molecular dynamics study	10
Redox-responsive mesoporous silica nanoparticles for chemo- photodynamic combination cancer therapy	10
Phased array ultrasonic S-scan testing of near-detection-surface defects based on a background subtraction algorithm	10
Impact of metakaolin to partially replace granulated blast furnace slag on the performance of alkali-activated slag grouting materials and evaluation of grouting effectiveness	10
Ferroelectric-like behavior in HfO2/Al2O3/AlN metal-insulator-semiconductor capacitor through AlN thermal stress	10
Effects of geometric parameters on photoemission of AlGaN nanowire array photocathode	10
Constitutive modeling for the flow stress behaviors of alloys based on variable order fractional derivatives	10
Free vibration analysis of composite conical shells using Walsh series method	10
Study on the effect of curved fiber laying angle on the vibration free attenuation of composite laminates	10
Sustainable optimization of concrete strength properties using artificial neural networks: a focus on mechanical performance	10
Degradation of Yb–Gd–Ti-Si middle entropy silicides in oxidizing atmosphere	10
Improvement of charge collection efficiency of the CdZnTe detectors by decreasing the Te inclusions	10
Conversion of sugarcane biomass into sustainable fabrics: softening of fibers using alkali and silicone softener treatment	10
Extraction of cellulose from soybean hulls for the development of polymer matrix composites with fishtail palm fibers	10
Performance of air plasma sprayed Cr3C2–25NiCr and NiCrMoNb coated X8CrNiMoVNb16–13 alloy subjected to high temperature corrosion environment	10