Journal of Environmental Health Science and Engineering

Papers
(The median citation count of Journal of Environmental Health Science and Engineering is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-05-01 to 2025-05-01.)
ArticleCitations
Improvement of natural fiber's properties and evaluation of its applicability as eco-friendly materials in noise pollution control76
Simultaneous removal of phenoxy herbicides, 2-methyl-4-chlorophenoxyacetic acid and 2,4-dichlorophenoxyacetic acid from aqueous media by magnetized MgAl-LDH@Fe3O4 composite: application of partial lea41
Particulate matter concentrations and characterization in urban subway system-case study Tehran, Iran38
Photocatalytic degradation of bisphenol a from aqueous solution using bismuth ferric magnetic nanoparticle: synthesis, characterization and response surface methodology-central composite design modeli36
Assessment of fungal bioaerosols and particulate matter characteristics in indoor and outdoor air of veterinary clinics32
Synthesis of novel adsorbent by incorporation of plant extracts in amino-functionalized silica-coated magnetic nanomaterial for the removal of Zn2+and Cu2+from aqueous solution26
Implemented indoor airborne transmission mitigation strategies during COVID-19: a systematic review25
Environmental impact and human health risk assessment of polycyclic aromatic hydrocarbons (pahs) in raw milk from free-ranging cattles in northwest nigeria24
US-assisted catalytic degradation of paraquat using ZnO/Fe3O4 recoverable composite: Performance, toxicity bioassay test and degradation mechanism24
Determining the appropriate mixing ratio in a multi-substrate anaerobic digestion of organic solid wastes employing Taguchi method24
Elimination and detoxification of phenanthrene assisted by a laccase from halophile Alkalibacillus almallahensis24
Nanosorbent based on coprecipitation of ZnO in goethite for competitive sorption of Cd(II)-Pb(II) and Cd(II)-Pb(II)-Ni(II) systems23
The assessment of lead concentration in raw milk collected from some major dairy farms in Iran and evaluation of associated health risk22
Polystyrene nanoplastics: optimized removal using magnetic nano-adsorbent and toxicity assessment in zebrafish embryos22
Ecological and human health risks assessment of some polychlorinated biphenyls (PCBs) in surface soils of central and southern parts of city of Tehran, Iran21
Conversion of biomass to N, S co-doped porous graphene as an adsorbent for mercury vapor removal: optimization and DFT study20
Heavy metal contaminated soil, water, and vegetables in northeastern Iran: potential health risk factors20
Status of antibiotic residues in milk and dairy products of Iran: a systematic review and meta-analysis19
Phytoremediation ability of H. strobilaceum and S. herbacea around an industrial town19
Investigation of arsenic removal from aqueous solution through selective sorption and nanofiber-based filters18
Novel application of in vitro disinfection for modeling the biofilm formation inhibition, antimicrobial susceptibility and antibiotic resistance of Pseudomonas aeruginosa: a study of free and combined18
Latent class analysis of initial nicotine dependence among adult waterpipe smokers18
Microplastics in anaerobic digestion: occurrence, impact, and mitigation strategies17
Determination of fluoride content in teas and herbal products popular in Poland17
Tracking genetically modified (GM) rice ingredients in samples of packed rice and food products from the marketplace in India: a pilot study for regulatory compliance17
Bacteria bioaerosol in the indoor air of educational microenvironments: Measuring exposures and assessing health effects17
The investigation of the influence of thermal plume and breathing on sleeping microenvironment16
Water quality evaluation and non-cariogenic risk assessment of exposure to nitrate in groundwater resources of Kamyaran, Iran: spatial distribution, Monte-Carlo simulation, and sensitivity analysis16
Plasma pyrolysis feasibility study of Spent Caustic waste to hydrogen production16
Performance of integrated sequencing batch reactor (SBR) and reverse osmosis (RO) process for leachate treatment: effect of pH16
Performance evaluation of PdO/ CuO TiO2 photocatalytic membrane on ceramic support for removing pharmaceutical compounds from water15
Spatial modeling of environmental vulnerability in the biggest river in Iran using geographical information systems15
Antibiotic photocatalysis and antimicrobial activity of low-cost multifunctional Fe3O4@HAp nanocomposites15
Meteorological dependence, source identification, and carcinogenic risk assessment of PM2.5-bound Polycyclic Aromatic Hydrocarbons (PAHs) in high-traffic roadside, urban background, and remote suburba14
Concentration and source allocation of black carbon by AE-33 model in urban area of Shenzhen, southern China14
Comprehensive systematic review and meta-analysis of microplastic prevalence and abundance in freshwater fish species: the effect of fish species habitat, feeding behavior, and Fulton’s condition fact14
A city-level analysis of PM2.5 pollution, climate and COVID-19 early spread in Spain13
Association between metal(loid)s in serum and leukemia: a systematic review and meta-analysis13
As(III) removal from aqueous solutions using simultaneous oxidation and adsorption process by hierarchically magnetic flower-like Fe3O4@C-dot@MnO2 nanocomposite13
Ppy/TiO2-SiO2 nanohybrid series: synthesis, characterization, photocatalytic activity, and antimicrobial potentiality13
Evaluation of pollutants in perfumes, colognes and health effects on the consumer: a systematic review13
Effective degradation of tetracycline in aqueous solution by an electro-Fenton process using chemically modified carbon/α-FeOOH as catalyst13
Modeling of wastewater treatment by Azolla filiculoides using response surface methodology12
Eco-friendly control of licorice aqueous extract to increase quality and resistance to postharvest decay in apple and tangerine fruits12
An environmental field assessment of soil quality and phytoremediation of toxic metals from saline soil by selected halophytes12
Assessing the toxic potency of absorbed trihalomethanes in leafy vegetables: the effects of different Chlorine pretreatment12
Preparation and application of zeolite-zinc oxide nano composite for nitrate removal from groundwater12
The assessment of two different pollutants dispersion from a coal-fired power plant for various thermal regimes12
Asian dust storms result in a higher risk of the silicosis hospital admissions12
Biomonitoring polycyclic aromatic hydrocarbon levels in domestic kitchens using commonly grown culinary herbs12
The efficiency of biodegradation processes for removal of tetracycline antibacterial drugs using activated sludge and river water inocula12
Microplastic predictive modelling with the integration of Artificial Neural Networks and Hidden Markov Models (ANN-HMM)11
Contrasting Iran’s air quality improvement during COVID-19 with other global cities11
An experimental investigation on the oxidative desulfurization of a mineral lubricant base oil11
Isolation and characterization of chromium (VI) tolerant bacteria from tannery effluents11
Use of Taguchi design for optimization of diesel-oil biodegradation using consortium of Pseudomonas stutzeri, Cellulosimicrobium cellulans, Acinetobacter baumannii and Pseudomonas balearica isolated f11
Increased allergic and asthmatic risks in children residing in industrial areas by surveying the pre-inflammatory (IgE, IL-4 and IL-13) biomarkers11
Determining biota succession in a domestic wastewater pond system after treatment with a specific consortium microalgae10
Mechanisms of microbial resistance against cadmium – a review10
Hemoglobin adducts as an important marker of chronic exposure to low concentration of 1, 3-butadiene10
Microbial activity and community level physiological profiles (CLPP) of soil under the cultivation of spring rape with the Roundup 360 SL herbicide10
Assessing BTEX concentrations emitted by hookah smoke in indoor air of residential buildings: health risk assessment for children10
Ultrasound-assisted heterogeneous process for organic dye pollutants destruction using the novel MIL-101(Fe)/ZrO2/MnFe2O4 nanocomposite catalyst from water medium10
Temporal profiles of ambient air pollutants and associated health outcomes in two polluted cities of the Middle East10
Artificial intelligence techniques in electrochemical processes for water and wastewater treatment: a review10
Sustainable valorisation of kitchen waste through greenhouse solar drying and microwave pyrolysis– technology readiness level for the production of biochar10
Mercury horizontal spatial distribution in paddy field and accumulation of mercury in rice as well as their influencing factors in a typical mining area of Tongren City, Guizhou, China9
Enhanced photocatalytic activity of Fe2O3@ZnO decorated CQD for inactivation of Escherichia coli under visible light irradiation9
Investigation of asbestos concentration in ambient and lavage fluids of patients referred for bronchoscopy, Ahvaz8
Model-based fractionation of biomass in a biological nutrient removal system and its effect on the removal efficiencies8
Assessing capabilities of conducted ambient air pollution health effects studies in 22 Eastern Mediterranean countries to adopt air quality standards: a review8
Effects of diesel-engine exhaust emissions on seed germination and seedling growth of Brassicaceae family using digital image analysis8
Exposure to environmental pollutants: A mini-review on the application of wastewater-based epidemiology approach8
Quantifying and qualifying hospital pharmaceutical waste: a case study in Tehran, Iran8
Prenatal exposure to metal mixture and birth weight; a Bayesian kernel machine regression analysis of two cohort studies in Japan and Iran8
Enhanced removal of fifteen pesticide mixture by a single bacterial strain using response surface methodology and its application in raw milk8
Odour and indoor air quality hazards in railway cars: an Australian mixed methods case study8
The prevalence of foodborne parasites in raw vegetables in Iran: a comprehensive systematic review and meta-analysis8
Influence of alumina nanoparticles on the performance of polyacrylonitrile membranes in MBR8
Investigation of infectious droplet dispersion in a hospital examination room cooled by split-type air conditioner7
The use of non-target high-resolution mass spectrometry screening to detect the presence of antibiotic residues in urban streams of Greensboro North Carolina7
Biologically treated industrial wastewater disinfection using the synergy of low-frequency ultrasound and H2O2/O37
Impact of soil treatment with Nitrilo Triacetic Acid (NTA) on Cd fractionation and microbial biomass in cultivated and uncultivated calcareous soil7
Correction: The optimum conditions for synthesis of Fe3O4/ZnO core/shell magnetic nanoparticles for photodegradation of phenol7
Prevalence of MRSA as an Infectious Agent in Sanitary Swimming Pools and Jacuzzis7
Evaluation of the lipase from castor bean (Ricinus Communis L.) as a potential agent for the remediation of used lubricating oil contaminated soils7
Copper cable doped with tin oxide and its application to photodegrade natural organic matters7
Assessment the impact of different fuels used in cement industry on pollutant emissions and ambient air quality: a case study in Egypt7
Optimization of photo-electro/Persulfate/nZVI process on 2–4 Dichlorophenoxyacetic acid degradation via central composite design: a novel combination of advanced oxidation process7
Urinary phenols and parabens in relation to hearing loss: The National Health and Nutrition Examination Survey7
The effects of different pretreatment technologies on microbial community in anaerobic digestion process: A systematic review7
High efficiency of magnetite nanoparticles for the arsenic removal from an aqueous solution and natural water taken from Tambo River in Peru7
Performance evaluation and siting index of the stabilization ponds based on environmental parameters: a case study in Iran7
Investigations on the surface disinfection efficacy of far-UVC 222 nm germicidal irradiance device in a controlled environment and field test7
Physicochemical methods for disinfection of contaminated surfaces – a way to control infectious diseases7
Phytoremediation of CdS/Te quantum dots by Ocimum basilicum in the presence of EDTA7
Simultaneous biodegradation of BTX by isolated degrading bacterial strains in a newly designed modulated bio-scrubber assisted to airlift parallel bioreactors6
Removal of heavy metals from the aqueous solution by nanomaterials: a review with analysing and categorizing the studies6
Treatment of the railway freight wagon wash effluents by coagulation methods on accelator reactor6
Introduction of nitrogen doped graphene nanosheets as efficient adsorbents for nitrate removal from aqueous samples6
A comprehensive study on the adsorption-photocatalytic processes using CoFe2O4/SiO2/MnO2 magnetic nanocomposite as a novel photo-catalyst for removal of Cr (VI) under simulated sunlight: Isotherm, kin6
Indoor radon measurement in buildings of a university campus in central Iran and estimation of its effective dose and health risk assessment6
Risk assessment of uptake of trace elements through consumption of cereals: a pilot study in Yerevan, Armenia6
Human health risk assessment of toxic heavy metals in summer crops and vegetables: a study in Ilam Province, Iran6
Correction to: Distribution and human health hazard appraisal with special reference to chromium in soils from Peenya industrial area, Bengaluru City, South India6
Identification and determination of the volatile organics of third-hand smoke from different cigarettes and clothing fabrics6
Systematic review and metal analysis on three important fungal group (dermatophytes, yeasts and saprophytes) isolated from Iranian swimming pools6
Facile encapsulation of nano zero-valent iron with calcium carbonate: synthesis, characterization and application for iron remediation6
A resin containing motifs of maleic acid and glycine: a super-adsorbent for adsorptive removal of basic dye pararosaniline hydrochloride and Cd(II) from water6
Production of biosurfactant by Bacillus megaterieum using agro-food wastes and its application in petroleum sludge oil recovery5
Microplastics as carriers of antibiotic resistance genes and pathogens in municipal solid waste (MSW) landfill leachate and soil: a review5
Effect of short-term exposure to air pollution on COVID-19 mortality and morbidity in Iranian cities5
Investigating the effects of vermicomposting process using Eisenia Fetida earthworms on the reduction of parasites population5
Pre-COVID-19 pandemic: effects on air quality in the three cities of India using fuzzy MCDM model5
Production of biodiesel from salvia mirzayanii oil via electrolysis using KOH/Clinoptilolite as catalyst5
Ecological risk assessment of heavy metals in the sediments of a Mediterranean lagoon complex5
Ecotoxicity and bioremediation potential assessment of soil from oil refinery station area5
Design and preparation of amino-functionalized core-shell magnetic nanoparticles for photocatalytic application and investigation of cytotoxicity effects5
Biomonitoring of metals in the blood and urine of waste recyclers from exposure to airborne fine particulate matter (PM2.5)5
Quality of life and sleep disorders in Tehran Employees Cohort (TEC); Association with secondhand smoking and wealth index5
Potential of some microbial isolates on diesel hydrocarbons removal, bio surfactant production and biofilm formation4
Prenatal blood lead levels and Birth Weight: a Meta-analysis study4
Evaluation of the relationship between psychological distress and sleep problems with annoyance caused by exposure to environmental noise in the adult population of Tehran Metropolitan City, Iran4
Using Artificial Intelligent to Model Predict the Biological Resilience With an Emphasis on Population of cyanobacteria in Jajrood River in The Eastern Tehran, Iran4
Decontamination of fenitrothion from aqueous solutions using rGO/MoS2/Fe3O4 magnetic nanosorbent: synthesis, characterization and removal application4
Correction to: Perfluoroalkyl and polyfluoroalkyl substances and cancer risk: results from a dose-response meta-analysis4
Novel catalytic degradation of Diazinon with ozonation/mg-Al layered double hydroxides: optimization, modeling, and dispersive liquid–liquid microextraction4
Potential of lytic bacteriophages as disinfectant to control of Pseudomonas aeruginosa on fomites4
Optimization of polypropylene microplastics removal using conventional coagulants in drinking water treatment plants via response surface methodology4
A new computer-based index for swimming pools’ environmental health assessment in big data environment by consensus-based fuzzy group decision-making models4
Perfluoroalkyl and polyfluoroalkyl substances and Cancer risk: results from a dose-response Meta-analysis4
Cyclic zinc capture and zeolite regeneration using a column method, mass transfer analysis of multi regenerated bed4
Occurrence of organic micropollutants and heavy metals in the soil after the application of stabilized sewage sludge4
The effect of size distribution of ambient air particulate matter on oxidative potential by acellular method Dithiothreitol; a systematic review4
Evaluation the effect of ZnO nanoparticle derived Bacillus subtilis on the expression of efflux pump genes (AdeB AdeRS) in Acinetobacter baumannii4
Management of caffeine in wastewater using MOF and perovskite materials: optimization, kinetics, and adsorption isotherm modelling4
Assessing health risks of polycyclic aromatic hydrocarbons (PAHs) in cooked fish using monte carlo simulation: a global review and meta-analysis4
Source identification and health risk assessments of heavy metals in indoor dusts of Ilorin, North central Nigeria4
0.087529897689819