Environmental Geotechnics

Papers
(The median citation count of Environmental Geotechnics is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2020-11-01 to 2024-11-01.)
ArticleCitations
Microplastics in soils: an environmental geotechnics perspective54
Mechanical behaviours of gas-hydrate-bearing clayey sediments of the South China Sea45
Remediation of heavy-metal-contaminated soils by biochar: a review36
Potential CO2 leakage from geological storage sites: advances and challenges30
Municipal solid waste management under Covid-19: challenges and recommendations29
Post Covid-19 water and waste water management to protect public health and geoenvironment28
Sustainable environmental geotechnics practices for a green economy27
Environmental geotechnics: challenges and opportunities in the post-Covid-19 world24
Evaluation of MICP treatment through EC and pH tests in urea hydrolysis process22
Synthesis of alkali-activated mortar using phosphogypsum-neutralised bauxite residue20
Creep behaviours of methane hydrate-bearing sediments17
Effect of climate change on earthen embankments in Southern Ontario, Canada17
Biological soil improvement using new environmental bacteria isolated from northern Iran15
Compressibility and shear strength behaviour of fresh and aged municipal solid wastes15
Submarine slope failure due to overpressure fluid associated with gas hydrate dissociation15
Size effect on mudstone strength during the freezing–thawing cycle14
Analytical solution for transport of degradable contaminant in cut-off wall and aquifer14
Technical aspects of mercury intrusion porosimetry for clays14
Numerical investigation on the mechanical behaviour of karst sinkholes13
Polymer-enhanced soil mixtures for potential use as covers or liners in landfill systems13
Bagasse ash–fly ash-geopolymer-treated soft Bangkok clay as subgrade material13
Compositional and geoenvironmental factors in microbially induced partial saturation13
Mechanical behaviour of soil under drying–wetting cycles and vertical confining pressures12
A comparison between Fe0/pumice and Fe0/lapillus mixtures in permeable reactive barriers12
Extraction, characterisation and remediation of microplastics from organic solid matrices12
A review analysis of gas hydrate tests: engineering progress and policy trend11
Wetting–drying response of an unsaturated pyroclastic soil vegetated with long-root grass10
Visualising fluid migration due to hydrate dissociation: implications for submarine slides10
Briefing: Water content determinations of peaty soils using the oven-drying method10
Waste-composition-dependent ‘HBM’ model parameters based on degradation experiments10
Mechanical and microstructural properties of iron tailings10
Impact of transient seepage on slope stability of earth-rock dams with geomembrane barrier defects9
Characterising sediment physical property variability for bench-scale dewatering purposes9
Possibility of impervious coating for the geotechnical reuse of soil and solid waste9
Effect of stress history of saturated clay on engineering behaviour of an energy pile9
Improving dust resistance of mine tailings using green biopolymer9
Role of vegetation in improving the stability of a tropical hill slope in Guam8
The effect of soil–vegetation–atmosphere interaction on slope stability: a numerical study8
Thermo-elasto-plastic analysis of geosynthetic clay liners exposed to thermal dehydration8
Desiccation crack formation and prevention in thin bentonite layers8
Chemical clogging of granular media under acidic groundwater conditions8
Steady-state analysis of pollutant transport to assess landfill liner performance8
Monitoring infiltration of capillary barrier with actively heated fibre Bragg gratings8
Soil properties affecting erosion induced by saltating particles8
Solidify/stabilise a heavy metal-contaminated soil using a novel steel slag-based binder8
Geotechnical and geoenvironmental engineering education during the pandemic7
Lime stabilisation of highly compressible surface from soils in ex-Lake Texcoco, Mexico7
Two-stage wetting deformation behaviour of rock-fill material7
Effects of air-injection pressure on airflow pattern of air sparging7
Performance of loose sand with different waste materials in stone columns in North Cyprus7
Experimental study on the monotonic shear strength of GM/CCL composite liner interface6
Multicomponent landfill gas transport in soil cover: column tests and numerical modelling6
Combined method limiting shrinkage–swelling behaviours of expansive soils in Huai’an, China6
Optimisation of microbially induced calcite precipitation protocol against erosion6
Deterioration of marine soft clay at east China solidified by cement–metakaolin composite6
Shear behaviour of Canadian marine clay/geomembrane interface under freeze–thaw cycles6
Effect of drying–wetting cycles on the hydromechanical behaviour of compacted coal gangue6
Index tests for geosynthetic clay liners containing bentonite–polymer composites6
Design of mass burial sites for safe and dignified disposal of pandemic fatalities6
DEM simulation of coexistence type methane hydrate bearing sediments6
Remediation of acid mine drainage with recycled concrete aggregates and fly ash6
The strength and durability of steel fibre recycled concrete in chloride environments6
A practical bio-based reversible permeability control for saturated sands6
Hydraulic and environmental compatibility of RCA with filters and subgrades in highways5
Optimising geosynthetic clay liner overlaps: implications on hydraulic performance5
A numerical approach to modelling biodegradable vertical drains5
Simulation of gas production from hydrate reservoirs (AT1) of Eastern Nankai Trough, Japan5
Prediction of hydraulic conductivity of sodium bentonite GCLs by machine learning approaches5
A thermo-hydro-mechanical finite-element model with freezing processes in saturated soils5
Botanical and geotechnical characteristics of blanket peat at three Irish bogflows5
Solidification and stabilisation of metal plating sludge with fly ash geopolymers5
Coupling effect on shallow slope stability under infiltration5
Occurrence and ecotoxicological effects of fires at municipal solid waste landfills4
Review: Complexation mechanism of organic matter and arsenic on iron-containing minerals4
Effects of organic content on soil-water characteristic curve and soil shrinkage4
Morphological controls on flow conductivity and viscosity of bentonite–polymer composites4
Relationship between dielectric constant of soils with clay content and dry unit weight4
Behaviour of energy piles under climate-change scenarios: a case study in Southern Italy4
Paradigm shifts in incinerator ash, sediment material recovery and landfill monitoring4
Investigation of methane fluxes from temporary cover of Xi’an Jiangcungou landfill, China4
Coupled effects of matric suction and temperature on the compression behaviour of loess4
Fate and impact of nano/microplastic in the geoenvironment — ecotoxicological perspective4
Effect of pore fluid pH on the collapse behaviour and microstructural evolution of a loess4
Regional stability and adaptation measures slope failures due to rainfall in Singapore3
Reusing abandoned natural gas storage sites for compressed air energy storage3
Evolution of municipal solid waste structure over time: compaction and settlement effects3
Development of a pressure-retained transfer system of seafloor natural gas hydrates3
Mitigating deterioration of cement-treated clay by microbe-based calcite precipitation3
Optimal ranges of soil index properties for diesel containment using compacted barriers3
Environmental impact and mechanical improvement of microbially induced calcium carbonate precipitation-treated coal fly ash–soil mixture3
Environmental assessment of underground coal gasification in deep-buried seams3
Investigation on thermo-mechanical response of energy piles in saturated clay3
Characteristics of gas hydrate reservoir from resistivity image in the Shenhu area, China3
Shear strength of the geomembrane–subgrade interface in heap leaching applications3
Recent peat slide in Co. Antrim extends the known range of weak basal peat across Ireland3
The particle-size sieving technique to remediate Pb- and Cu-contaminated agricultural soil3
Swelling and consolidation behaviour of polymerised bentonites with cation solutions3
Effect of acid on the hydrophysical properties of red clay3
Characterisation, remediation and valorisation of contaminated sediments: a critical review3
Water-retention properties of xanthan-gum-biopolymer-treated soils3
An expression for irregularly distributed hydrocarbon volume using exponential decay method3
Response of granular iron tailings to laboratory-induced environmental stressing3
Monitoring of electrokinetic treatment of landfill leachate-contaminated clay in Portugal3
Study of hydraulic fracturing for gas drainage in a coal mine in Iran2
A case study on the applicability of elastic velocity models to hydrate-bearing sediments2
Mathematical and numerical modelling of limestone dissolution2
Low-frequency seismic responses during microbial biofilm formation in sands2
Rheological model of viscoelastic–plastic geogrid-reinforced tailings2
Analytical solution to axisymmetric consolidation under surcharge–vacuum–electro-osmosis2
Numerical investigation of hydrolysis failure of aggregates in loess2
Preliminary test results on gas permeability of soils and geosynthetic clay liners2
Effects of far-field boundary conditions on the simulation of hydrate production2
Corrosion resistance of polyurethane grouting material in landfill site2
The impact of temperature, chlorides and sulfate-reducing bacteria on the corrosion of steel in soil2
Additives based on vegetable biomass to improve the stabilisation of expansive clay soil2
Ecotoxicity assessment of hydrophobised soils2
Chemical clogging of synthetic filters in tailings ponds caused by ferrous iron ions2
Swelling pressures and hydration times in a clay seal2
Phenol adsorption properties and microstructural changes of organically modified bentonite2
Abandoned lignite mines in Mitake, Japan, and some issues2
Influence of salinity on sedimentation during electrokinetic consolidation of dredged mud2
A bounding surface model of gas-hydrate-bearing sediments2
Editorial: Geoenvironmental issues related to gas hydrates, part I2
Environmental and geotechnical properties of lightweight aggregates made of reused solid wastes2
Simulation of water storage in a reclamation cover incorporating tailings consolidation2
Effect of precipitation pattern of enzyme-induced calcite on compressive strength of sand2
Hydromechanical modelling of CO2 sequestration using a component-based multiphysics code2
Effect of effective stress on hydraulic conductivity of bentonite–polymer geosynthetic clay liners to coal combustion product leachates2
Comprehensive geotechnical and geochemical characterisation of two diamond ore tailings2
Determination of heat generation due to organic degradation in a double-layered bioreactor2
Fate of bentonite in slag–cement–bentonite slurry trench cut-off walls for polluted sites2
Foamed backfilling for combatting mine fires2
Treatment of Pb (II) and Cu (II) using Na-bentonite-supported nanoscale zero-valent iron2
Steady-state analysis of heat–moisture–salt coupling in unsaturated layered soil2
Ultralightweight foundation system for peaty ground2
THCM numerical simulations of the engineered barrier system for radioactive waste disposal2
Hydraulic conductivity of tyre-derived aggregate for leachate collection and removal2
Long-term behaviour of coir-fibre-reinforced soils2
Editorial: Geoenvironmental issues related to gas hydrates, part II2
In situ chemical remediation using the jet grouting technique: a field test2
Testing the hydraulic conductivity of degraded municipal solid waste in China2
Clay–fly ash geopolymer characterisation and application for the removal of lead and zinc2
A prediction model for the gas permeability of geomaterials2
Solidification/stabilisation of Zn-contaminated soils using cement and soda residue2
Power-law correlations of mine subsidence for a metal mine in China2
Natural pore pressure fluctuations as an indicator of shallow aquitard continuity2
Compression strength of wood chips mixed with steelmaking slag2
0.053750038146973