Journal of Materials Chemistry C

Article	Citations
Novel plasmonic–photonic Janus films with aluminum nanoisland-coated colloidal arrays for versatile applications	134
Ferroelectricity in tetragonal polycrystalline ceramics: matrix transformation of electric dipoles	126
Gallium nitride for ultrasensitive thermo-active switching in terahertz metamaterial micro–nanophotonic devices	124
Ultrafast scintillation at room temperature achieved in CsPbCl 3 -based single crystals through Br over-doping	112
Evaluation analysis of electromagnetic wave absorption for self-assembled 3D graphene skeleton-supported BN/SiC composites	112
Back cover	109
Prediction of aqueous stable lead-free hybrid halide perovskites for efficient solar water splitting using machine learning and molecular dynamics	105
Front cover	100
High brightness and vibronic luminescent behavior of YAG:Mn 4+ /Ca 2+ red phosphor for preparing p	99
Plasmon-enhanced all-organic ultraviolet photodetectors with high sensitivity and long-term stability	98
The effect of Al 2 O 3 electrical shielding on MoS 2	96
Advancing thermoplasmonic sensing: gold nanobipyramids for enhanced light-to-heat conversion	95
Tuning the space and charge in molecular delocalization of highly efficient blue TADF emitters based on a 3,4,6,7,9,10-hexahydroacridine-1,8(2 H ,5	90
Planar chiral paracyclophanes: emerging scaffolds for circularly polarized OLEDs	88
Donor incomplete ionization and mobility enhancement in ultra-thin silicon-on-insulator films doped by phosphorus end-terminated polymers	88
Old dog, new trick: discovery of the solid-state phthalate detection capabilities of fluorescein	85
V-shaped D–π–A–π–D molecules based on benzothiophene- S , S -dioxide: tuning of excited states	85
3D-printed organic electrochemical transistors on microfluidic paper for multianalyte point-of-care testing	85
Contents list	84
Front cover	83
Achieving low energy consuming bio-based piezoelectric nanogenerators via modulating the inner layer thickness for a highly sensitive pedometer	80
Hydrothermal synthesis of stable lead-free Cs 4 MnBi 2 Cl 12	78
Green spectral simulative ceramic pigments with combined laser absorption and high-temperature stability	78
Thermally driven morphology and lattice transformation of NiCo alloy for accelerating electrocatalytic water splitting	78
Functionalization of Si 3 N 4 with an aldehyde inhibitor for area selective deposition of HfO	78

The experimental phase equilibria studies of the Ni–Sn–S system	74
Coordination-induced p-type selectivity and enhanced hole mobility in an ambipolar organic semiconductor via electron passivation	73
Front cover	72
Balancing the molecular twist and conformational rigidity in imidazo[1,2- a ]pyridines to achieve dual-state emissive (DSE) luminogens for applications i	71
Europium( ii ) complexes with substituted triethylenetetramine: new emitters to construct efficient deep blue organic light emitting diodes by spin c	71
Synthesis of metal nitride and metal oxide nanoparticles by atmospheric-pressure spark ablation	71
Back cover	70
A high-performance infrared photodetector based on GeTe films and In/Ag bimetallic electrodes	70
Mechanophotonics: fabrication of a 2 × 2 hybrid directional coupler from flexible organic crystals	70
Inside front cover	66
Acceptor modification of diindolocarbazole embedded multiple-resonance emitters for efficient narrowband deep-blue OLEDs with CIE y	65
Indole and triazole containing ferrocene-based two-terminal resistive memory devices	65
Correction: Space charge-induced electrofluorochromic behavior for C12-BTBT-based thin-film devices	64
Unravelling solid-state microstructures from oligomers to polymers of an isoindigo-based π-conjugated system	64
Photo-dielectric and electric field effect on the structural and phonon properties of calcium-substituted BaTiO 3	64
Na 7 [SbW 6 O 24 ]: a new type of turn-off lumi	63
Tailored ligand design enabling comprehensive passivation of perovskite nanocrystals for light-emitting diodes	63
Self-assembled molecules as selective contacts in CsPbBr 3 nanocrystal light emitting diodes	63
Janus-type ionic conductive gels with single-sided adhesiveness prepared by a “one-step” method for strain/pressure sensors	62
Rational molecular doping to enhance interfacial carrier dynamics for reliable hole transport layer-free perovskite solar cells	62
Carbazole-based host materials for red to near-infrared OLEDs: molecular design strategies and structure–property relationships	61
Room temperature multiferroicity and magnetoelectric coupling in Ca/Mn-modified BaTiO 3	61
Broadband THz absorption using nanosheets of Bi 2 Te 3 grown on a transparent conductor	61
Front cover	60
Intense and repeatable orange mechanoluminescence of Mn 2+ activated CaGa 4 O	59
Recent advances in lead-free halide perovskites: from synthesis to applications	58
A first-principles study of the structural, electronic, and optical properties of NaF and CsPbX 3 heterojunctions under strain	58
Sulfur-dissolved high-entropy alloys with ultrawide-bandwidth electromagnetic-wave absorption properties synthesized via a mechanochemical process	58
Back cover	58
The effect of machining-generated residual stress on the properties of single crystal piezoelectric layers in high-frequency ultrasonic transducers	58
Electric field-induced intramolecular charge transfer of two-dimensional covalent organic frameworks with D–A systems for organic memristors	58
f → f transition luminescence of Eu 2+ in barium–aluminum–borate oxyfluoride glass ceramics	58
Stability enhancement and pronounced three-photon absorption in SrCl 2 -doped FAPbBr 3 nano crysta	56
Stability of low voltage hygroscopic insulator P3HT transistors	56
1D all-inorganic metal halide Rb 2 AgX 3 (X = Cl, Br): Pb-free scintillator materials for ionising	56
Photo-chemically assisted redox-nano welding for highly conductive and robust copper-based electrodes	56
Efficient additive-free FAPbI 3 perovskite solar cells achieved by promoting homogeneity	56
Performance limit of one-dimensional SbSI nanowire transistors	55
Tunable chemical solution deposition of Y 3 Fe 5 O 12	55
Back cover	55
Boosting the dielectric and electrical performance of perovskite materials by collaborative augmentation with reduced graphene oxide nanosheets for cutting-edge storage solutions	54
π-Extended chlorinated non-fullerene acceptors for achieving high performance organic solar cells	53
Acid-assisted thermal ring-opening reaction of photochromic diarylethene closed-ring isomers	53
Magnetic phase separation in the EuPdSn 2 ground state	53
Front cover	53
The binding details of a 2-(methylthio)thiophene/furan anchor anchored to the Au electrode in the formed molecular junction	51
Inside back cover	51
Solution-processed high- κ SrTiO 3 with high breakdown field for gate dielectrics	51
Enhancing photocatalytic hydrogen evolution of metal sulfides via a Co-CdS/Ni 5 P	50
Power generation from n-type NbCo 1− x Ni	50

Research on tin-copper bimetallic phosphide nanoparticles as anode for sodium-ion batteries	50
Molecular design of phenazine-5,10-diyl-dibenzonitriles and the impact on their thermally activated delayed fluorescence properties	49
Optical nonlinearity of Janus material TaSSe and its applications in fiber lasers	49
Inside back cover	49
Simultaneous dual detection of total chlorine in oil matrices via quantum dot-based LSPR	49
Rapid stress release through thiol–thioester exchange in phenylic crosslinked polymers	49
A DFT study of the mechanism of NH 3 -SCR NOx reduction over Mn-doped and Mn–Ti co-doped CoAl 2 O	49
Multimode luminescence and highly anti-thermal quenching in Sb 3+ /Yb 3+ /Pr <	48
Exploring the electronic and superior piezoelectric properties of two-dimensional PH-SiX materials for high-performance silicon-based devices	48
A sequential artificial light-harvesting system based on a metallacycle for sensitive detection of biothiols	48
Interface-engineered p-CsCu 2 I 3 /n-Ga 2 O	48
Enhancing the electronic-coupling and conductivity of a monolayer film of ferrocenyl molecules by Pd and Cu doping	48
Conformation-dependent room-temperature phosphorescence in purely organic systems	48
Correction: Recent advances in single crystal narrow band-gap semiconductor nanomembranes and their flexible optoelectronic device applications: Ge, GeSn, InGaAs, and 2D materials	47
Carmine–PVA composites as optical limiters: effect of carmine concentration and the role of laser intensity in optical limiting	47
Magneto-optical Raman effect of WS 2 tuned by a plasmonic gold nanograting	47
Homotypic heterojunction of metal oxygen/sulfide as an electron transport layer for high-performance perovskite solar cells	47
Multiple charge-transfer excited state induced efficient and stable thermally activated delayed fluorescence	47
External condition-induced interfacial charge transfer in single-walled carbon nanotube/graphene van der Waals heterostructures	46
In situ firmly anchored polypyrrole on NiV-LDHs for efficient aqueous-system asymmetric supercapacitors	46
The unexpected mechanism of transformation from conventional room-temperature phosphorescence to TADF-type organic afterglow triggered by simple chemical modification	46
A Te microwire/2D organic–inorganic hybrid perovskite heterojunction self-powered polarization photodetector for imaging and communication encoding	46
Constructing bimetallic conjugated coordination polymers as efficient electrocatalysts for water splitting	46
Lead-MOFs derived from an aggregation-induced emission ligand: a heat-induced fluorescence “turn-on” thermometer and the role of Na + cations	46
Back cover	46
Electrical, thermal and thermoelectric properties of Ti 3 C 2 T	46
Photo-gain optimization in multilayer organic phototransistors by study of space-charge limited current	45
Lifetime thermometry with an ytterbium( iii )–terbium( iii ) molecular upconverter	45
Substitution-position-dependent optoelectronic properties of methylthiolated anthracenes	45
Back cover	45
Green deep-eutectic synthesis of multinary quantum dots for luminescent polymeric composites and LED applications	45
From a simple push–pull dye to a broad-band absorbing and photoconducting material by assembly with CuBr	45
Alloying strategy enables record-low melting temperature in 2D metal halide perovskites	45
Inside back cover	44
Trap-controlled operational stability in dibenzofuran-based hosts for blue TADF-OLEDs	44
Composition–structure–luminescence and enhancement of Cr 3+ activated broadband near infrared phosphors for night vision, bio-imaging, and noninvasiv	44
Perovskite nanocrystals passivated by aromatic phosphonic acid for high-performance light-emitting diodes	44
Chiral mesostructured In 2 O 3 films twisted along different crystal orientations	44
An artificial visual perception system based on ZnO threshold switching neurons with integrated rate and time-to-first-spike coding	44
Three-component color-tunable room temperature afterglow doped materials through Förster-resonance energy transfer	43
Impact of oxidation-induced ordering on the electrical and mechanical properties of a polythiophene co-processed with bistriflimidic acid	43
Highly directional and tunable mid-infrared transmission induced by resonant optical tunneling with VO 2	43
Tunable near-infrared piezochromic luminescence by effective substituent modification of D–A structures	43
Contents list	43
Contents list	43
Fabrication of lightweight multifunctional microwave-absorbing composites with load-bearing and infrared stealth capabilities using a modified 3D integrated hollow E-glass fiber	43
Planar inverted cone antenna based on silver nanowire network with enhanced interfacial adhesion after surface functionalization using (3-glycidyloxypropyl)trimethoxysilane	43
Rare earth halide double perovskites for high-performance resistive random access memory	42
2D and quasi-2D hybrid perovskites containing organic cations with an extended conjugated system: opportunities and challenges	42
Hysteresis-encoded thermometry in the cryogenic regime using a Dy-single-molecule magnet	42
Interplay between connectivity and passivating agents in perovskite quantum dot networks	42
Investigating the angle-dependent emission of dye-doped 3D luminescent opals: optical property insights	42
Enhancing the coercivity of ferrimagnetic NiCo 2 O 4 films via	42
A new Te/Ag planar heterojunction device based on screen printing for boosting photothermoelectric performance and heat-source-free non-contact sensing	41
Kilogram-scale high-yield production of PbI 2 microcrystals for optimized photodetectors	41
Intensive and thermally conductive boron nitride/aramid nanofiber composite fibers fabricated via a wet spinning technique	41
An ambient air sinterable Cu@Ag nanoparticle ink with exceptional oxidation resistance and stability for EMI shielding and printed RFID applications	40
Extended π-conjugation: a key to magnetic anisotropy preservation in highly reactive porphyrins	40
Pressure-induced structural phase transition, irreversible amorphization and upconversion luminescence enhancement in Ln 3+ -codoped LiYF	40
A near-infrared photoelectrochromic device with indoor thermal management for self-powered smart windows	40
Ag–O–Ce 3+ atomic interface and surface oxygen vacancies on CeO 2 synergistically promoted the sel	40
The interface effect of MOF-derived Pr 6 O 11 /SnO 2	40
Extending the molecular conjugation of phosphorescence units to accurately modulate ultralong organic room temperature phosphorescence	40
Electric-field-induced non-ergodic relaxor to ferroelectric transition in BiFeO 3 – x SrTiO	40
Novel semiconductor materials for advanced supercapacitors	40
Recent progress in spiro-type hole transport materials for efficient and stable perovskite solar cells	40
CoV 2 O 6 coupled with MXenes as a highly efficient electrocatalyst for water splitting	40
Near-infrared circularly polarized organic room temperature phosphorescence based on a chiral host–guest doping strategy	39
Advanced HIL strategies in QLEDs: V 2 O 5 and PEDOT:PSS dual-layer for charge balance and electron	39
Disorder stabilisation of high pressure Mn 2− x Co	39
A circularly polarized (CP) white organic light-emitting diode (WOLED) based on a chiral organo-Sm 3+ complex	39
Multifunctional Bi 2 TeO 5 :Er 3+ with dual-sti	39
Contents list	39
Enhanced comprehensive performance of carbon-based hole-transport-layer-free CsPbI 2 Br solar cells by a low-cost and stable long chain polymer	39
Non-halogen solvent processed all-polymer organic solar cells with improved vertical phase morphology	39
Structural evolution and improved energy storage performance of lead hafnate-based antiferroelectric solid solutions	38
A self-healing and deformation responsive supercapacitor fabricated using a smart gel polymer electrolyte and a redox-activated electrode	38
Band and contact engineering in Ga 2 O 3 UV photodetectors and X-ray detectors	38
Tailoring the mechanical properties of benzothiadiazole-based semiconducting polymers through chalcogen atom substitution	38
Room-temperature gas sensors based on low-dimensional nanomaterials	38

Long-lasting time-dependent tunable afterglow in Zn 2 SiO 4 :Mn 2+	38
2D MXene interface engineering for organic solar cells	38
Consistent evidence for intra- and inter-columnar transport decoupling in sputter-grown ZnSnN 2 thin films through growth-driven microstructural evol	37
Postsynthetic modification of a Zn-MOF to yield an efficient H-bond catalyst in the preparation of biologically active macromolecules	37
Optimizing carbon-nanotube-driven polyhedral Cu 2 Mn 3 O 8	37
Enhanced near-infrared detection in organic phototransistors via optimized donor–acceptor single crystals	37
Metallic to half-metallic transition driven by pressure and anion composition in niobium oxyfluoride	37
Femtosecond laser direct writing of CsPb(I/Br) 3 quantum dot films for displays and holography	37
Defect and carrier engineering in Er-doped ZnSe enables synergistic electromagnetic and charge-transfer SERS enhancement	37
Intense fluorescence of air-stable sodium diarylformamidinate: effective control with a novel electron-withdrawing 4-cyano-3,5-bis(trifluoromethyl)phenyl group	37
Electric control of Chern number in valley-polarized quantum anomalous Hall insulators	37
Evolution of intrinsic defect density in UV laser conditioning at the KDP crystal stress affected zone and its role in improving the laser induced damage threshold	37
Wireless, flexible, and disposable sensing devices enabling real-time long-term patient medical care for pressure injury prevention	37
Acidochromic pyrimidine-based dyes for highly efficient dye-sensitized solar cells	37
High-temperature superconductivity in Li 2 YH 6 driven by Li doping and a specific hydrogen-cage s	37
NiOOH-mediated electron injection into Ti 3 C 2 F	37
Non-volatile memristor-based artificial synaptic behavior of redox-active organic composites	37
High-efficiency blade-coated organic solar cells enabled via an in situ nitrogen-blowing and heating strat	37
Lanthanide hydrogels with tunable circularly polarized luminescence (CPL) via supramolecular chirality induction	37
Computational insights into the synergistic modulation of Δ E ST , spin–orbit coupling, and reorganization energy in phtha	36
Carbon-rich macrocycles and carbon nanoribbons as unique optical materials	36
A flexible protective electronic skin with tunable anti-impact and thermal insulation properties for potential rescue applications	36
Recent advances in single crystal narrow band-gap semiconductor nanomembranes and their flexible optoelectronic device applications: Ge, GeSn, InGaAs, and 2D materials	36
DMF-mediated polycrystalline phase transition of Cd-based perovskites: dual-emission tuning for temperature sensing and single-component white LEDs	36
A novel ratiometric optical fiber X-ray sensor based on NaGdF 4 :Tb/CaAl 2 O <	36
Synergistic diameter control and post-treatment engineering of electrospun PVDF nanofibers toward β-phase enrichment and enhanced piezoelectric response	36
A morphological study of random nanostructured external light extraction layers for enhancing optical characteristics of OLEDs	36
Defect-assisted wavelength dependence of one photon and multiphoton absorptions in a composite nanofiber of polyvinylpyrrolidone and hexagonal boron nitride	36
A novel AlF 3 :Cr 3+ NIR phosphor with high thermal quenching stability for advanced pc-LEDs	36
Tuning thermomechanical properties of hydrogen-bonded materials by using a mixed cocrystal approach	36
Self-healable and freeze-resistant polyelectrolyte based on an EG anchor chain and dual dynamic reversible interaction as highly sensitive ionic skin	36
Transfer-printing of patterned PEDOT:PSS structures for bendable, stretchable and biodegradable electronics	35
Excellent energy storage performance in cross-linked polyimide dielectrics with positively charged cross-linking points	35
A salicylaldoximate-based AIE probe for the detection of the nerve agent simulant DCP	35
Waste-heat harvesting using a thermoelectric generator coupled with a hygroscopic hydrogel for use in the energy industry	35
Mechanoluminescence: emerging trends and future perspectives	35
Transforming Mo 0.5 W 0.5 O 3 to MoS	35
Ferroelectric to relaxor crossover in Zr-doped BaTiO 3 -based ceramics and its consequences for the electrocaloric effect	35
Photochromic and photoluminescence modulation properties of Zr 6 Nb 2 O 1	35
Luminescent coordination polymers based on [{Mo6I8}(CN)6]2-cluster and Ag complexes: structural design of bright red to NIR scintillating materials	35
A highly stretchable thermoelectric generator developed from polyaniline-based nanocomposites for body heat harvesting	35
Practical Water-Based Coating for Fabricating Luminescent Solar Concentrators	35
Tunable photoluminescence, visible-light excitation, and high quantum yield in scalable copper cluster halide emitters for optoelectronics	35
Recent advances in small-molecule organic fluorescent semiconductors	35
Highly stretchable coaxial P3HT electrospun fibers with enhanced reversibility	35
Performance improvement of resistive switching memory achieved by reducing the size of MoS 2 embedded in poly(vinyl alcohol) films	34
Highly fluorescent nitrogen-doped carbon dots with large Stokes shifts	34
Brominated trityl radical nanoparticles: metal-free ratiometric nanothermometer with near-infrared excimeric emission in water	34
Multi-dimensional dynamic fluorescence readout from laser engineered In 2 O 3 nanowire micropatter	34
An all-printed flexible field effect transistor based on tellurene nanosheets with graphene electrodes	34
Anti-fatigue, self-bonding, adhesive gels for easy-to-prepare 3D stacking flexible electronics	34
Construction of gel networks via [2+2] photocycloaddition	34
Negative solvatochromism and sign inversion of circularly polarized luminescence in chiral exciplexes as a function of solvent polarity	34
Contents list	34
Impacts of linking units of porphyrin dimer donors on the performance of organic solar cells	34
Active optical modulation in hybrid transparent-conductive oxide/electro-optic multilayers	34
Enhancing molecular aggregation and decreasing the optical gap by a dual-additive to reduce the energy loss of all-polymer organic solar cells	33
Robust fluorescence enhancement with different orientations based on a hybrid silicon-silver bilayer grating	33
Critical transition to a highly conductive state through PEDOT oligomer percolation in redox-active COFs	33
Correction: Crystallinity-modulated hollow CeO 2− x nanorods as free radical	33
Organic microspheres and microcrystals made from pyridine-functionalized chromophores and a chiral phosphoric acid	33
The impact of hydrogen peroxide production in OECTs for in vitro applications	33
Metallopolymer-based block copolymers for perfluorinated substances (PFAS) and ion removal	33
Temperature invariant lifetime based luminescent manometer on Mn 4+ ions	33
Magnetic anisotropy evolution with Fe content in electrodeposited Ni 100− x	33
In situ transmission electron microscopy (TEM) study on the structural evolution behavior of nano Sn sheets under a thermal field	33
Pressure effects on the electrical transport properties of benzene	33
An integrated leather-based fluid transport wearable sweat device for electrolyte balance monitoring	33
Research progress of single crystal perovskite growth	33
Frequency-triggered circuit transition in organic light-emitting diodes probed by impedance spectroscopy	32
Inside front cover	32
Reversible Zn 2+ /Al 3+ intercalation in niobium-substituted polyoxometalates and demonstration of	32
Enhanced removal performance and evaluative interaction mechanism of europium from an aqueous medium by microbial yeast-decorated zeolitic imidazolate framework hybrids	32
Interface exciplex formation in TADF organic light-emitting transistors	32
Anti-naphthalene bisbenzimidazole columnar mesogens as interfacial modifiers in perovskite solar cells	32
Inside front cover	32
Sequential Li-intercalation exfoliation enables high-purity NbSe 2 with enhanced electrical and thermal performance	32
Unravelling material properties of halide perovskites by combined microwave photoconductivity and time-resolved photoluminescence spectroscopy	32
Revealing key surface contaminants via stack-flipping strategy: investigating rinsing protocols for clean graphene transfer and enhanced electrical perfo	32
A long-lived photoluminescent silver nanocluster-infused silver terephthalate metal organic framework with antibacterial and biofilm inhibition activity: a high functional resource	32
Hybrid piezoelectricity enabled flexible AZO/SiC thin films sensor with a high output voltage and broad temperature range	32
The effect of fluorination on the low and high frequency dielectric constants of non-polymeric organic semiconductors – towards homojunction solar cells	32
Heat capacity and structural transition effect in polycrystalline kesterite	32
Contents list	31
Vertical organic electrochemical transistor platforms for efficient electropolymerization of thiophene based oligomers	31
Correction: Orthogonal anthracene and pyrene derivatives for efficient pure deep-blue organic light-emitting diodes	31
A self-powered photodetector of SnSeS/p-Si heterojunction with high-performance	31
Efficient carbon dot-based fluorescence-afterglow dual-mode white-light materials via surface modification	31
Non-adiabatic molecular dynamics study of excited states in thermally stimulated delayed phosphorescent gold( iii ) complexes	31
Near stoichiometric lithium niobate crystal with dramatically enhanced piezoelectric performance for high-temperature acceleration sensing	31
The HfO 2 ferroelectric–metal heterojunction and its emergent electrostatic potential: comparison with ZrO 2	31
Introduction of sidewall CN: a high-temperature-resistant COF for lithium-ion storage	31
High-performance hardware primitives based on sub-10 nm nanodiodes for cryptography applications	31
Temperature-stable Li 4 Ti 3 O 8 composite micr	31
Multiscale computational analysis of the effect of end group modification on PM6:BTP- x OSCs performance	31